Skip to contentSkip to conversation

support for vxlan vni filtering

PATCH In review Roopa Prabhu 3 participants 7 messages May 8, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v2 cover support for vxlan vni filtering

This series adds bridge command to manage recently added vnifilter on a collect metadata vxlan (external) device. Also includes per vni stats support.

examples:
$bridge vni add dev vxlan0 vni 400

$bridge vni add dev vxlan0 vni 200 group 239.1.1.101

$bridge vni del dev vxlan0 vni 400

$bridge vni show

$bridge -s vni show

Nikolay Aleksandrov (1):
bridge: vni: add support for stats dumping

Roopa Prabhu (2):
bridge: vxlan device vnifilter support
ip: iplink_vxlan: add support to set vnifiltering flag on vxlan device

v2 : replace matches by strcmp in bridge/vni.c. v2 still uses matches in iplink_vxlan.c to match the rest of the code

 bridge/Makefile       |   2 +-
 bridge/br_common.h    |   2 +
 bridge/bridge.c       |   1 +
 bridge/monitor.c      |  28 ++-
 bridge/vni.c          | 439 ++++++++++++++++++++++++++++++++++++++++++
 include/libnetlink.h  |   9 +
 ip/iplink_vxlan.c     |  23 ++-
 lib/libnetlink.c      |  20 ++
 man/man8/bridge.8     |  77 +++++++-
 man/man8/ip-link.8.in |   9 +
 10 files changed, 606 insertions(+), 4 deletions(-)
 create mode 100644 bridge/vni.c
Signature · 1 line
2.25.1
#1 lore raw

PATCH v2 1/3 bridge: vxlan device vnifilter support

This patch adds bridge command to manage
recently added vnifilter on a collect metadata
vxlan device.

examples:
$bridge vni add dev vxlan0 vni 400

$bridge vni add dev vxlan0 vni 200 group 239.1.1.101

$bridge vni del dev vxlan0 vni 400

$bridge vni show

$bridge -s vni show

---
 bridge/Makefile      |   2 +-
 bridge/br_common.h   |   2 +
 bridge/bridge.c      |   1 +
 bridge/monitor.c     |  28 +++-
 bridge/vni.c         | 380 +++++++++++++++++++++++++++++++++++++++++++
 include/libnetlink.h |   8 +
 lib/libnetlink.c     |  18 ++
 man/man8/bridge.8    |  77 ++++++++-
 8 files changed, 513 insertions(+), 3 deletions(-)
 create mode 100644 bridge/vni.c
bridge/Makefile +1 -1
index c6b7d08d..01f8a455 100644
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-BROBJ = bridge.o fdb.o monitor.o link.o mdb.o vlan.o
+BROBJ = bridge.o fdb.o monitor.o link.o mdb.o vlan.o vni.o
 
 include ../config.mk
 
bridge/br_common.h +2 -0
index 610e83f6..841f0594 100644
@@ -14,6 +14,7 @@ void print_stp_state(__u8 state);
 int parse_stp_state(const char *arg);
 int print_vlan_rtm(struct nlmsghdr *n, void *arg, bool monitor,
 		   bool global_only);
+int print_vnifilter_rtm(struct nlmsghdr *n, void *arg, bool monitor);
 void br_print_router_port_stats(struct rtattr *pattr);
 
 int do_fdb(int argc, char **argv);
@@ -21,6 +22,7 @@ int do_mdb(int argc, char **argv);
 int do_monitor(int argc, char **argv);
 int do_vlan(int argc, char **argv);
 int do_link(int argc, char **argv);
+int do_vni(int argc, char **argv);
 
 extern int preferred_family;
 extern int show_stats;
bridge/bridge.c +1 -0
index f3a4f08f..704be50c 100644
@@ -58,6 +58,7 @@ static const struct cmd {
 	{ "fdb",	do_fdb },
 	{ "mdb",	do_mdb },
 	{ "vlan",	do_vlan },
+	{ "vni",	do_vni },
 	{ "monitor",	do_monitor },
 	{ "help",	do_help },
 	{ 0 }
bridge/monitor.c +27 -1
index 845e221a..f17c1906 100644
@@ -31,10 +31,20 @@ static int prefix_banner;
 
 static void usage(void)
 {
-	fprintf(stderr, "Usage: bridge monitor [file | link | fdb | mdb | vlan | all]\n");
+	fprintf(stderr, "Usage: bridge monitor [file | link | fdb | mdb | vlan | vni | all]\n");
 	exit(-1);
 }
 
+static int print_tunnel_rtm(struct nlmsghdr *n, void *arg, bool monitor)
+{
+	struct tunnel_msg *tmsg = NLMSG_DATA(n);
+
+	if (tmsg->family == PF_BRIDGE)
+		return print_vnifilter_rtm(n, arg, monitor);
+
+	return 0;
+}
+
 static int accept_msg(struct rtnl_ctrl_data *ctrl,
 		      struct nlmsghdr *n, void *arg)
 {
@@ -73,6 +83,12 @@ static int accept_msg(struct rtnl_ctrl_data *ctrl,
 			fprintf(fp, "[VLAN]");
 		return print_vlan_rtm(n, arg, true, false);
 
+	case RTM_NEWTUNNEL:
+	case RTM_DELTUNNEL:
+		if (prefix_banner)
+			fprintf(fp, "[TUNNEL]");
+		return print_tunnel_rtm(n, arg, true);
+
 	default:
 		return 0;
 	}
@@ -86,6 +102,7 @@ int do_monitor(int argc, char **argv)
 	int lneigh = 0;
 	int lmdb = 0;
 	int lvlan = 0;
+	int lvni = 0;
 
 	rtnl_close(&rth);
 
@@ -105,9 +122,13 @@ int do_monitor(int argc, char **argv)
 		} else if (matches(*argv, "vlan") == 0) {
 			lvlan = 1;
 			groups = 0;
+		} else if (strcmp(*argv, "vni") == 0) {
+			lvni = 1;
+			groups = 0;
 		} else if (strcmp(*argv, "all") == 0) {
 			groups = ~RTMGRP_TC;
 			lvlan = 1;
+			lvni = 1;
 			prefix_banner = 1;
 		} else if (matches(*argv, "help") == 0) {
 			usage();
@@ -151,6 +172,11 @@ int do_monitor(int argc, char **argv)
 		exit(1);
 	}
 
+	if (lvni && rtnl_add_nl_group(&rth, RTNLGRP_TUNNEL) < 0) {
+		fprintf(stderr, "Failed to add bridge vni group to list\n");
+		exit(1);
+	}
+
 	ll_init_map(&rth);
 
 	if (rtnl_listen(&rth, accept_msg, stdout) < 0)
bridge/vni.c new file +380 -0

380 lines not on this page · raw message

include/libnetlink.h +8 -0
index 372c3706..a1ec91ec 100644
@@ -112,6 +112,9 @@ int rtnl_nexthop_bucket_dump_req(struct rtnl_handle *rth, int family,
 				 req_filter_fn_t filter_fn)
 	__attribute__((warn_unused_result));
 
+int rtnl_tunneldump_req(struct rtnl_handle *rth, int family, int ifindex)
+	__attribute__((warn_unused_result));
+
 struct rtnl_ctrl_data {
 	int	nsid;
 };
@@ -331,6 +334,11 @@ int rtnl_from_file(FILE *, rtnl_listen_filter_t handler,
 	((struct rtattr *)(((char *)(r)) + NLMSG_ALIGN(sizeof(struct br_vlan_msg))))
 #endif
 
+#ifndef TUNNEL_RTA
+#define TUNNEL_RTA(r) \
+	((struct rtattr *)(((char *)(r)) + NLMSG_ALIGN(sizeof(struct tunnel_msg))))
+#endif
+
 /* User defined nlmsg_type which is used mostly for logging netlink
  * messages from dump file */
 #define NLMSG_TSTAMP	15
lib/libnetlink.c +18 -0
index 4d33e4dd..b3c3d0ba 100644
@@ -1609,3 +1609,21 @@ void nl_print_policy(const struct rtattr *attr, FILE *fp)
 		}
 	}
 }
+
+int rtnl_tunneldump_req(struct rtnl_handle *rth, int family, int ifindex)
+{
+	struct {
+		struct nlmsghdr nlh;
+		struct tunnel_msg tmsg;
+		char buf[256];
+	} req = {
+		.nlh.nlmsg_len = NLMSG_LENGTH(sizeof(struct tunnel_msg)),
+		.nlh.nlmsg_type = RTM_GETTUNNEL,
+		.nlh.nlmsg_flags = NLM_F_DUMP | NLM_F_REQUEST,
+		.nlh.nlmsg_seq = rth->dump = ++rth->seq,
+		.tmsg.family = family,
+		.tmsg.ifindex = ifindex,
+	};
+
+	return send(rth->fd, &req, sizeof(req), 0);
+}
man/man8/bridge.8 +76 -1

101 lines not on this page · raw message

Signature · 1 line
2.25.1
#2 lore raw

PATCH v2 2/3 ip: iplink_vxlan: add support to set vnifiltering flag on vxlan device

In reply to Roopa Prabhu

This patch adds option to set vnifilter flag on a vxlan device. vnifilter is only supported on a collect metadata device.

example: set vnifilter flag

$ ip link add vxlan0 type vxlan external vnifilter local 172.16.0.1
---
 ip/iplink_vxlan.c     | 23 ++++++++++++++++++++++-
 man/man8/ip-link.8.in |  9 +++++++++
 2 files changed, 31 insertions(+), 1 deletion(-)
ip/iplink_vxlan.c +22 -1
index 9afa3cca..3dde2150 100644
@@ -48,6 +48,7 @@ static void print_explain(FILE *f)
 		"		[ [no]udp6zerocsumrx ]\n"
 		"		[ [no]remcsumtx ] [ [no]remcsumrx ]\n"
 		"		[ [no]external ] [ gbp ] [ gpe ]\n"
+		"		[ [no]vnifilter ]\n"
 		"\n"
 		"Where:	VNI	:= 0-16777215\n"
 		"	ADDR	:= { IP_ADDRESS | any }\n"
@@ -81,6 +82,7 @@ static int vxlan_parse_opt(struct link_util *lu, int argc, char **argv,
 	__u8 learning = 1;
 	__u16 dstport = 0;
 	__u8 metadata = 0;
+	__u8 vnifilter = 0;
 	__u64 attrs = 0;
 	bool set_op = (n->nlmsg_type == RTM_NEWLINK &&
 		       !(n->nlmsg_flags & NLM_F_CREATE));
@@ -330,6 +332,15 @@ static int vxlan_parse_opt(struct link_util *lu, int argc, char **argv,
 		} else if (!matches(*argv, "gpe")) {
 			check_duparg(&attrs, IFLA_VXLAN_GPE, *argv, *argv);
 			addattr_l(n, 1024, IFLA_VXLAN_GPE, NULL, 0);
+		} else if (!matches(*argv, "vnifilter")) {
+			check_duparg(&attrs, IFLA_VXLAN_VNIFILTER,
+				     *argv, *argv);
+			addattr8(n, 1024, IFLA_VXLAN_VNIFILTER, 1);
+			vnifilter = 1;
+		} else if (!matches(*argv, "novnifilter")) {
+			check_duparg(&attrs, IFLA_VXLAN_VNIFILTER,
+				     *argv, *argv);
+			addattr8(n, 1024, IFLA_VXLAN_VNIFILTER, 0);
 		} else if (matches(*argv, "help") == 0) {
 			explain();
 			return -1;
@@ -341,12 +352,17 @@ static int vxlan_parse_opt(struct link_util *lu, int argc, char **argv,
 		argc--, argv++;
 	}
 
+	if (!metadata && vnifilter) {
+		fprintf(stderr, "vxlan: vnifilter is valid only when 'external' is set\n");
+		return -1;
+	}
+
 	if (metadata && VXLAN_ATTRSET(attrs, IFLA_VXLAN_ID)) {
 		fprintf(stderr, "vxlan: both 'external' and vni cannot be specified\n");
 		return -1;
 	}
 
-	if (!metadata && !VXLAN_ATTRSET(attrs, IFLA_VXLAN_ID) && !set_op) {
+	if (!metadata && !vnifilter && !VXLAN_ATTRSET(attrs, IFLA_VXLAN_ID) && !set_op) {
 		fprintf(stderr, "vxlan: missing virtual network identifier\n");
 		return -1;
 	}
@@ -420,6 +436,11 @@ static void vxlan_print_opt(struct link_util *lu, FILE *f, struct rtattr *tb[])
 		print_bool(PRINT_ANY, "external", "external ", true);
 	}
 
+	if (tb[IFLA_VXLAN_VNIFILTER] &&
+	    rta_getattr_u8(tb[IFLA_VXLAN_VNIFILTER])) {
+		print_bool(PRINT_ANY, "vnifilter", "vnifilter", true);
+	}
+
 	if (tb[IFLA_VXLAN_ID] &&
 	    RTA_PAYLOAD(tb[IFLA_VXLAN_ID]) >= sizeof(__u32)) {
 		print_uint(PRINT_ANY, "id", "id %u ", rta_getattr_u32(tb[IFLA_VXLAN_ID]));
man/man8/ip-link.8.in +9 -0
index fc214a10..6f332645 100644
@@ -601,6 +601,8 @@ the following additional arguments are supported:
 .B gbp
 ] [
 .B gpe
+] [
+.RB [ no ] vnifilter
 ]
 
 .in +8
@@ -712,6 +714,13 @@ are entered into the VXLAN device forwarding database.
 .RB "(e.g. " "ip route encap" )
 or the internal FDB should be used.
 
+.sp
+.RB [ no ] vnifilter
+- specifies whether the vxlan device is capable of vni filtering. Only works with a vxlan
+device with external flag set. once enabled, bridge vni command is used to manage the
+vni filtering table on the device. The device can only receive packets with vni's configured
+in the vni filtering table.
+
 .sp
 .B gbp
 - enables the Group Policy extension (VXLAN-GBP).
Signature · 1 line
2.25.1
#3 lore raw

PATCH v2 3/3 bridge: vni: add support for stats dumping

In reply to Roopa Prabhu

From: Nikolay Aleksandrov <[email protected]>

Add support for "-s" option which causes bridge vni to dump per-vni statistics. Note that it disables vni range compression.

Example:

$ bridge -s vni | more
 dev               vni              group/remote
 vxlan0             1024  239.1.1.1
                     RX: bytes 0 pkts 0 drops 0 errors 0
                     TX: bytes 0 pkts 0 drops 0 errors 0
                    1025  239.1.1.1
                     RX: bytes 0 pkts 0 drops 0 errors 0
                     TX: bytes 0 pkts 0 drops 0 errors 0
---
 bridge/vni.c         | 93 ++++++++++++++++++++++++++++++++++++--------
 include/libnetlink.h |  3 +-
 lib/libnetlink.c     |  4 +-
 3 files changed, 81 insertions(+), 19 deletions(-)
bridge/vni.c +76 -17
index 79dff005..a0c2792c 100644
@@ -186,6 +186,59 @@ static void print_range(const char *name, __u32 start, __u32 id)
 
 }
 
+static void print_vnifilter_entry_stats(struct rtattr *stats_attr)
+{
+	struct rtattr *stb[VNIFILTER_ENTRY_STATS_MAX+1];
+	__u64 stat;
+
+	open_json_object("stats");
+	parse_rtattr_flags(stb, VNIFILTER_ENTRY_STATS_MAX, RTA_DATA(stats_attr),
+			   RTA_PAYLOAD(stats_attr), NLA_F_NESTED);
+
+	print_nl();
+	print_string(PRINT_FP, NULL, "%-" __stringify(IFNAMSIZ) "s   ", "");
+	print_string(PRINT_FP, NULL, "RX: ", "");
+
+	if (stb[VNIFILTER_ENTRY_STATS_RX_BYTES]) {
+		stat = rta_getattr_u64(stb[VNIFILTER_ENTRY_STATS_RX_BYTES]);
+		print_lluint(PRINT_ANY, "rx_bytes", "bytes %llu ", stat);
+	}
+	if (stb[VNIFILTER_ENTRY_STATS_RX_PKTS]) {
+		stat = rta_getattr_u64(stb[VNIFILTER_ENTRY_STATS_RX_PKTS]);
+		print_lluint(PRINT_ANY, "rx_pkts", "pkts %llu ", stat);
+	}
+	if (stb[VNIFILTER_ENTRY_STATS_RX_DROPS]) {
+		stat = rta_getattr_u64(stb[VNIFILTER_ENTRY_STATS_RX_DROPS]);
+		print_lluint(PRINT_ANY, "rx_drops", "drops %llu ", stat);
+	}
+	if (stb[VNIFILTER_ENTRY_STATS_RX_ERRORS]) {
+		stat = rta_getattr_u64(stb[VNIFILTER_ENTRY_STATS_RX_ERRORS]);
+		print_lluint(PRINT_ANY, "rx_errors", "errors %llu ", stat);
+	}
+
+	print_nl();
+	print_string(PRINT_FP, NULL, "%-" __stringify(IFNAMSIZ) "s   ", "");
+	print_string(PRINT_FP, NULL, "TX: ", "");
+
+	if (stb[VNIFILTER_ENTRY_STATS_TX_BYTES]) {
+		stat = rta_getattr_u64(stb[VNIFILTER_ENTRY_STATS_TX_BYTES]);
+		print_lluint(PRINT_ANY, "tx_bytes", "bytes %llu ", stat);
+	}
+	if (stb[VNIFILTER_ENTRY_STATS_TX_PKTS]) {
+		stat = rta_getattr_u64(stb[VNIFILTER_ENTRY_STATS_TX_PKTS]);
+		print_lluint(PRINT_ANY, "tx_pkts", "pkts %llu ", stat);
+	}
+	if (stb[VNIFILTER_ENTRY_STATS_TX_DROPS]) {
+		stat = rta_getattr_u64(stb[VNIFILTER_ENTRY_STATS_TX_DROPS]);
+		print_lluint(PRINT_ANY, "tx_drops", "drops %llu ", stat);
+	}
+	if (stb[VNIFILTER_ENTRY_STATS_TX_ERRORS]) {
+		stat = rta_getattr_u64(stb[VNIFILTER_ENTRY_STATS_TX_ERRORS]);
+		print_lluint(PRINT_ANY, "tx_errors", "errors %llu ", stat);
+	}
+	close_json_object();
+}
+
 static void print_vni(struct rtattr *t, int ifindex)
 {
 	struct rtattr *ttb[VXLAN_VNIFILTER_ENTRY_MAX+1];
@@ -242,6 +295,10 @@ static void print_vni(struct rtattr *t, int ifindex)
 							 &addr));
 		}
 	}
+
+	if (ttb[VXLAN_VNIFILTER_ENTRY_STATS])
+		print_vnifilter_entry_stats(ttb[VXLAN_VNIFILTER_ENTRY_STATS]);
+
 	close_json_object();
 	print_string(PRINT_FP, NULL, "%s", _SL_);
 }
@@ -310,6 +367,7 @@ static int print_vnifilter_rtm_filter(struct nlmsghdr *n, void *arg)
 static int vni_show(int argc, char **argv)
 {
 	char *filter_dev = NULL;
+	__u8 flags = 0;
 	int ret = 0;
 
 	while (argc > 0) {
@@ -330,25 +388,26 @@ static int vni_show(int argc, char **argv)
 
 	new_json_obj(json);
 
-	if (!show_stats) {
-		if (rtnl_tunneldump_req(&rth, PF_BRIDGE, filter_index) < 0) {
-			perror("Cannot send dump request");
-			exit(1);
-		}
+	if (show_stats)
+		flags = TUNNEL_MSG_FLAG_STATS;
 
-		if (!is_json_context()) {
-			printf("%-" __stringify(IFNAMSIZ) "s  %-"
-			       __stringify(VXLAN_ID_LEN) "s  %-"
-			       __stringify(15) "s",
-			       "dev", "vni", "group/remote");
-			printf("\n");
-		}
+	if (rtnl_tunneldump_req(&rth, PF_BRIDGE, filter_index, flags) < 0) {
+		perror("Cannot send dump request");
+		exit(1);
+	}
 
-		ret = rtnl_dump_filter(&rth, print_vnifilter_rtm_filter, NULL);
-		if (ret < 0) {
-			fprintf(stderr, "Dump ternminated\n");
-			exit(1);
-		}
+	if (!is_json_context()) {
+		printf("%-" __stringify(IFNAMSIZ) "s  %-"
+		       __stringify(VXLAN_ID_LEN) "s  %-"
+		       __stringify(15) "s",
+		       "dev", "vni", "group/remote");
+		printf("\n");
+	}
+
+	ret = rtnl_dump_filter(&rth, print_vnifilter_rtm_filter, NULL);
+	if (ret < 0) {
+		fprintf(stderr, "Dump ternminated\n");
+		exit(1);
 	}
 
 	delete_json_obj();
include/libnetlink.h +2 -1
index a1ec91ec..a7b0f352 100644
@@ -112,7 +112,8 @@ int rtnl_nexthop_bucket_dump_req(struct rtnl_handle *rth, int family,
 				 req_filter_fn_t filter_fn)
 	__attribute__((warn_unused_result));
 
-int rtnl_tunneldump_req(struct rtnl_handle *rth, int family, int ifindex)
+int rtnl_tunneldump_req(struct rtnl_handle *rth, int family, int ifindex,
+			__u8 flags)
 	__attribute__((warn_unused_result));
 
 struct rtnl_ctrl_data {
lib/libnetlink.c +3 -1
index b3c3d0ba..c27627fe 100644
@@ -1610,7 +1610,8 @@ void nl_print_policy(const struct rtattr *attr, FILE *fp)
 	}
 }
 
-int rtnl_tunneldump_req(struct rtnl_handle *rth, int family, int ifindex)
+int rtnl_tunneldump_req(struct rtnl_handle *rth, int family, int ifindex,
+			__u8 flags)
 {
 	struct {
 		struct nlmsghdr nlh;
@@ -1622,6 +1623,7 @@ int rtnl_tunneldump_req(struct rtnl_handle *rth, int family, int ifindex)
 		.nlh.nlmsg_flags = NLM_F_DUMP | NLM_F_REQUEST,
 		.nlh.nlmsg_seq = rth->dump = ++rth->seq,
 		.tmsg.family = family,
+		.tmsg.flags = flags,
 		.tmsg.ifindex = ifindex,
 	};
 
Signature · 1 line
2.25.1
#4 lore raw
In reply to Roopa Prabhu
Quoted 19 lines · Roopa Prabhu

This series adds bridge command to manage recently added vnifilter on a collect metadata vxlan (external) device. Also includes per vni stats support.

examples:
$bridge vni add dev vxlan0 vni 400

$bridge vni add dev vxlan0 vni 200 group 239.1.1.101

$bridge vni del dev vxlan0 vni 400

$bridge vni show

$bridge -s vni show

Nikolay Aleksandrov (1):
bridge: vni: add support for stats dumping

Quoted 7 lines

Roopa Prabhu (2):
bridge: vxlan device vnifilter support
ip: iplink_vxlan: add support to set vnifiltering flag on vxlan device

v2 : replace matches by strcmp in bridge/vni.c. v2 still uses matches in iplink_vxlan.c to match the rest of the code

fixed those as well and applied to iproute2-next. We are not taking any more uses of matches(), even for legacy commands.

#5 lore raw
Quoted 24 lines · David Ahern
Quoted 23 lines · Roopa Prabhu

This series adds bridge command to manage recently added vnifilter on a collect metadata vxlan (external) device. Also includes per vni stats support.

examples:
$bridge vni add dev vxlan0 vni 400

$bridge vni add dev vxlan0 vni 200 group 239.1.1.101

$bridge vni del dev vxlan0 vni 400

$bridge vni show

$bridge -s vni show

Nikolay Aleksandrov (1):
bridge: vni: add support for stats dumping

Roopa Prabhu (2):
bridge: vxlan device vnifilter support
ip: iplink_vxlan: add support to set vnifiltering flag on vxlan device

Quoted 5 lines
Quoted 3 lines

v2 : replace matches by strcmp in bridge/vni.c. v2 still uses matches in iplink_vxlan.c to match the rest of the code

fixed those as well and applied to iproute2-next. We are not taking any more uses of matches(), even for legacy commands.

ok, thank you.

#6 lore raw
In reply to Roopa Prabhu
This series was applied to iproute2/iproute2-next.git (main) by David Ahern <[email protected]>:

Hello:

This series was applied to iproute2/iproute2-next.git (main) by David Ahern <[email protected]>:

Quoted 9 lines · On Sun, 8 May 2022 04:53:37 +0000 you wrote:

This series adds bridge command to manage recently added vnifilter on a collect metadata vxlan (external) device. Also includes per vni stats support.

examples:
$bridge vni add dev vxlan0 vni 400

[...]

Here is the summary with links:
- [iproute2,net-next,v2,1/3] bridge: vxlan device vnifilter support

    https://git.kernel.org/pub/scm/network/iproute2/iproute2-next.git/commit/?id=45cd32f9f7d5
  - [iproute2,net-next,v2,2/3] ip: iplink_vxlan: add support to set vnifiltering flag on vxlan device
    (no matching commit)
  - [iproute2,net-next,v2,3/3] bridge: vni: add support for stats dumping
    https://git.kernel.org/pub/scm/network/iproute2/iproute2-next.git/commit/?id=40b50f153c52

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html