use xilinx gpio from linux on a ppc405
Hi
I installed (with some help of this mailinglist) a Linux (Kernel 2.6.23 from xilinx) on a ppc405 of a Virtex 2 PRO on a XUPV2P. Then I installed Xenomai. Now I want to control some devices from the Board, so I thought first I try to turn the LEDs on and of. I enabled the LEDs in my Design without interrupt and also compiled the Kernel with Xilinx OPG GPIO support. But I don't know realy how to go on. I found only 2 pages in the internet which gave me a bit of information, but nothing helped me. Can Anyone explain me what I have to do, or send me a link to a page where it is explained?
The 2 pages I found:
--------------------------
http://osdir.com/ml/linux.uclinux.microblaze/2005-08/msg00120.html
http://www.tango-controls.org/Members/jbutanowicz/tango-on-ml403
The output of the kernel while booting:
-------------------------------------------------
Linux version 2.6.23xlnx (meyer@tiv007) (gcc version 3.4.5) #1 Thu Jul 17 12:10:27 CEST 2008 Xilinx Generic PowerPC board support package (Xilinx XUPV2P) (Virtex-II Pro) Zone PFN ranges:
DMA 0 -> 65536
Normal 65536 -> 65536
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 65536
Built 1 zonelists in Zone order. Total pages: 65024
Kernel command line: console=ttyUL0 root=/dev/xsa2 rw
Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFF000
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x25
Console: Xilinx UART Lite
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 257664k available (1580k kernel code, 500k data, 96k init, 0k highmem) Mount-cache hash table entries: 512
NET: Registered protocol family 16
Registering device uartlite:0
Registering device xsysace:0
Registering device xilinx_emac:0
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
uartlite.0: ttyUL0 at MMIO 0x40600003 (irq = 3) is a uartlite console [ttyUL0] enabled
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize System ACE at 0x41800000 mapped to 0xD1020000, irq=1, 500472KB
xsa: xsa1 xsa2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]> xilinx_emac xilinx_emac.0: MAC address is now 2: 0: 0: 0: 0: 0
XEmac: using fifo mode.
XEmac: Detected PHY at address 0, ManufID 0x0013, Rev. 0x78e2.
eth0: Dropping NETIF_F_SG since no checksum feature.
eth0: Xilinx 10/100 EMAC at 0x80400000 mapped to 0xD1040000, irq=2
eth0: XEmac id 1.1a, block id 32, type 1
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on xsa2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing unused kernel memory: 96k init
INIT: version 2.85 booting
Welcome to DENX Embedded Linux Environment
Press 'I' to enter interactive startup.
Building the cache [ OK ]
storage network audio done[ OK ]
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method. Setting clock : Thu Jan 1 00:00:20 UTC 1970 [ OK ]
Setting hostname localhost: [ OK ]
Checking filesystems
Checking all file systems.
[ OK ]
Mounting local filesystems: [ OK ] Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Bringing up loopback interface: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged Starting portmap: [ OK ] Mounting NFS filesystems: XSysAce: Queue is plugged
[ OK ]
XSysAce: Queue is plugged
Mounting other filesystems: [ OK ]
DENX ELDK version 4.1 build 2007-01-19
Linux 2.6.23xlnx on a ppc
localhost login:
Thanks and Greez
Joachim
_________________________________________________________________________
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten! Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114
needhelp to install linux 2.6 on ppc405 of a virtex II pro
Hi
I want to install linux 2.6 on a ppc405 of a virtex II pro, and then patch it with rtai or xenomai. Is there some tutorial explaining the installation procedure (where to find sources, drivers etc).
I have found this link:
http://users.telenet.be/steven.kauffmann/installation/index.htm
but it concerns linux 2.4;
Can anyone help me to find useful links or documents to install the 2.6 kernel whith a real time extension?
Thanks
Signature · 2 lines
View this message in context: http://www.nabble.com/use-xilinx-gpio-from-linux-on-a-ppc405-tp18507061p20218592.html Sent from the linuxppc-embedded mailing list archive at Nabble.com.
RE: needhelp to install linux 2.6 on ppc405 of a virtex II pro
We don't directly support the V2Pro, but we do support the Virtex 4 which also uses the ppc405 in the Xilinx GIT Tree.
git://git.xilinx.com
http://git.xilinx.com
You should make sure that you use arch/powerpc rather than arch/ppc which many older web sites have tutorials about. Arch/ppc is not longer supported.
You can find more information about this at http://xilinx.wikidot.com
This information assumes you already know Xilinx products and is not a tutorial on all Xilinx products. It also assumes you know Linux so it is really the Xilinx unique aspects of the kernel/BSP.
We've now created a forum for Embedded Linux at Xilinx at the following location.
Thanks,
John
Quoted 2 lines
-----Original Message-----
From: [email protected]
[mailto:linuxppc-embedded-
Quoted 10 lines
[email protected]] On Behalf Of saadia
Sent: Tuesday, October 28, 2008 6:00 PM
To: [email protected]
Subject: needhelp to install linux 2.6 on ppc405 of a virtex II pro ==
Hi
I want to install linux 2.6 on a ppc405 of a virtex II pro, and then
patch
Quoted 1 line
it with rtai or xenomai. Is there some tutorial explaining the
installation
Quoted 5 lines
procedure (where to find sources, drivers etc).
I have found this link:
http://users.telenet.be/steven.kauffmann/installation/index.htm
but it concerns linux 2.4;
Can anyone help me to find useful links or documents to install the
2.6
Quoted 6 lines
kernel whith a real time extension?
Thanks
=--
View this message in context:
http://www.nabble.com/use-xilinx-gpio-from-linux-on-a-ppc405-
Quoted 8 lines
tp18507061p20218592.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com. =_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
This email and any attachments are intended for the sole use of the named r= ecipient(s) and contain(s) confidential information that may be proprietary= , privileged or copyrighted under applicable law. If you are not the intend= ed recipient, do not read, copy, or forward this email message or any attac= hments. Delete this email message and any attachments immediately.
Hi,
I have installed linux 2.6 on the xupv2p board. I have uart, ethernet, but sysace device is not working.
I have seen in this forum that other persons have the problem. Could you tell me if you have sysace driver working?
Also I want to install xenomai, but the problem is that linux from denx tree does not support opb_emac ethernet
driver. I need Ethernet because I use nfs to access the root file system. So another question is:
when you installed xenomai, where was the rfs? and did you used Ethernet driver?
Thanks
Quoted 172 lines · Joachim Meyer
Hi
I installed (with some help of this mailinglist) a Linux (Kernel 2.6.23 from xilinx) on a ppc405 of a Virtex 2 PRO on a XUPV2P. Then I installed Xenomai. Now I want to control some devices from the Board, so I thought first I try to turn the LEDs on and of. I enabled the LEDs in my Design without interrupt and also compiled the Kernel with Xilinx OPG GPIO support. But I don't know realy how to go on. I found only 2 pages in the internet which gave me a bit of information, but nothing helped me. Can Anyone explain me what I have to do, or send me a link to a page where it is explained?
The 2 pages I found:
--------------------------
http://osdir.com/ml/linux.uclinux.microblaze/2005-08/msg00120.html
http://www.tango-controls.org/Members/jbutanowicz/tango-on-ml403The output of the kernel while booting:
-------------------------------------------------
Linux version 2.6.23xlnx (meyer@tiv007) (gcc version 3.4.5) #1 Thu Jul 17 12:10:27 CEST 2008
Xilinx Generic PowerPC board support package (Xilinx XUPV2P) (Virtex-II Pro)
Zone PFN ranges:
DMA 0 -> 65536
Normal 65536 -> 65536
Movable zone start PFN for each node
early_node_map[1] active PFN ranges0: 0 -> 65536Built 1 zonelists in Zone order. Total pages: 65024
Kernel command line: console=ttyUL0 root=/dev/xsa2 rw Xilinx INTC #0 at0x41200000mapped to0xFDFFF000
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x25
Console: Xilinx UART Lite
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 257664k available (1580k kernel code, 500k data, 96k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Registering device uartlite:0
Registering device xsysace:0
Registering device xilinx_emac:0
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
uartlite.0: ttyUL0 at MMIO0x40600003(irq = 3) is a uartlite console [ttyUL0] enabled
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize System ACE at0x41800000mapped to0xD1020000, irq=1, 500472KB
xsa: xsa1 xsa2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>xilinx_emacxilinx_emac.0: MAC address is now 2: 0: 0: 0: 0: 0
XEmac: using fifo mode.
XEmac: Detected PHY at address 0, ManufID0x0013, Rev.0x78e2.
eth0: DroppingNETIF_F_SGsince no checksum feature.
eth0: Xilinx 10/100 EMAC at0x80400000mapped to0xD1040000, irq=2
eth0: XEmac id 1.1a, block id 32, type 1
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on xsa2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing unused kernel memory: 96k init
INIT: version 2.85 booting
Welcome to DENX Embedded Linux Environment Press 'I' to enter interactive startup.
Building the cache [ OK ]
storage network audio done[ OK ]
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
Setting clock : Thu Jan 1 00:00:20 UTC 1970 [ OK ] Setting hostname localhost: [ OK ]
Checking filesystems
Checking all file systems.
[ OK ]Mounting local filesystems: [ OK ] Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Bringing up loopback interface: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged Starting portmap: [ OK ] Mounting NFS filesystems: XSysAce: Queue is plugged[ OK ]
XSysAce: Queue is plugged
Mounting other filesystems: [ OK ]DENX ELDK version 4.1 build 2007-01-19
Linux 2.6.23xlnx on a ppclocalhost login:
Thanks and Greez
Joachim
_________________________________________________________________________
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten! Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
Signature · 2 lines
View this message in context: http://www.nabble.com/use-xilinx-gpio-from-linux-on-a-ppc405-tp18507061p21010485.html Sent from the linuxppc-embedded mailing list archive at Nabble.com.
Hi,
This is interesting...
I have the sysace working but the ethernet not.
Just an idea:
For the sysace driver in the 2.6 kernel the old device file entries don't work anymore.
Do you have the correct device nodes in /dev? You can create those nodes with the following commands:
# mknod -m 660 xsa b 254 0 # mknod -m 660 xsa1 b 254 1 # mknod -m 660 xsa2 b 254 2 # mknod -m 660 xsa3 b 254 3
Concerning the ethernet...: ;-)
Which IP Type do you have for the Ethernet_MAC? Mine is xps_ethernetlite but I can't find a linux driver which seems to work with this one.
regards,
Jan
Quoted 198 lines · xavier.vvv
Hi,
I have installed linux 2.6 on the xupv2p board. I have uart, ethernet, but sysace device is not working.
I have seen in this forum that other persons have the problem. Could you tell me if you have sysace driver working?
Also I want to install xenomai, but the problem is that linux from denx tree does not supportopb_emacethernet
driver. I need Ethernet because I use nfs to access the root file system. So another question is:
when you installed xenomai, where was the rfs? and did you used Ethernet driver?Thanks
Quoted 172 lines · Joachim Meyer
Hi
I installed (with some help of this mailinglist) a Linux (Kernel 2.6.23 from xilinx) on a ppc405 of a Virtex 2 PRO on a XUPV2P. Then I installed Xenomai. Now I want to control some devices from the Board, so I thought first I try to turn the LEDs on and of. I enabled the LEDs in my Design without interrupt and also compiled the Kernel with Xilinx OPG GPIO support. But I don't know realy how to go on. I found only 2 pages in the internet which gave me a bit of information, but nothing helped me. Can Anyone explain me what I have to do, or send me a link to a page where it is explained?
The 2 pages I found:
--------------------------
http://osdir.com/ml/linux.uclinux.microblaze/2005-08/msg00120.html
http://www.tango-controls.org/Members/jbutanowicz/tango-on-ml403The output of the kernel while booting:
-------------------------------------------------
Linux version 2.6.23xlnx (meyer@tiv007) (gcc version 3.4.5) #1 Thu Jul 17 12:10:27 CEST 2008
Xilinx Generic PowerPC board support package (Xilinx XUPV2P) (Virtex-II Pro)
Zone PFN ranges:
DMA 0 -> 65536
Normal 65536 -> 65536
Movable zone start PFN for each node
early_node_map[1] active PFN ranges0: 0 -> 65536Built 1 zonelists in Zone order. Total pages: 65024
Kernel command line: console=ttyUL0 root=/dev/xsa2 rw Xilinx INTC #0 at0x41200000mapped to0xFDFFF000
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x25
Console: Xilinx UART Lite
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 257664k available (1580k kernel code, 500k data, 96k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Registering device uartlite:0
Registering device xsysace:0
Registering device xilinx_emac:0
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
uartlite.0: ttyUL0 at MMIO0x40600003(irq = 3) is a uartlite console [ttyUL0] enabled
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize System ACE at0x41800000mapped to0xD1020000, irq=1, 500472KB
xsa: xsa1 xsa2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>xilinx_emacxilinx_emac.0: MAC address is now 2: 0: 0: 0: 0: 0
XEmac: using fifo mode.
XEmac: Detected PHY at address 0, ManufID0x0013, Rev.0x78e2.
eth0: DroppingNETIF_F_SGsince no checksum feature.
eth0: Xilinx 10/100 EMAC at0x80400000mapped to0xD1040000, irq=2
eth0: XEmac id 1.1a, block id 32, type 1
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on xsa2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing unused kernel memory: 96k init
INIT: version 2.85 booting
Welcome to DENX Embedded Linux Environment Press 'I' to enter interactive startup.
Building the cache [ OK ]
storage network audio done[ OK ]
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
Setting clock : Thu Jan 1 00:00:20 UTC 1970 [ OK ] Setting hostname localhost: [ OK ]
Checking filesystems
Checking all file systems.
[ OK ]Mounting local filesystems: [ OK ] Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Bringing up loopback interface: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged Starting portmap: [ OK ] Mounting NFS filesystems: XSysAce: Queue is plugged[ OK ]
XSysAce: Queue is plugged
Mounting other filesystems: [ OK ]DENX ELDK version 4.1 build 2007-01-19
Linux 2.6.23xlnx on a ppclocalhost login:
Thanks and Greez
Joachim
_________________________________________________________________________
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten! Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embeddedSignature · 7 lines
View this message in context: http://www.nabble.com/use-xilinx-gpio-from-linux-on-a-ppc405-tp18507061p21010485.html Sent from the linuxppc-embedded mailing list archive at Nabble.com. _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
Hi Jan,
I used EDK 9.1 and I have the opb_emac ethernet controller.
I selected Xilinx 10/100 opb emac support in linux 2.6 configuration (devic= edrivers/ Network device support/ Ethernet (10 or 100Mbit) ). Concerning sysace, you have downloaded linux 2.6 from denx or xilinx tree? I will try creating xsa nodes . Hope that it will work.
Thanks
Xavier
Quoted 14 lines · Jan M=C3=BCller wrote:
=20
Hi,
=20
This is interesting...
=20
I have the sysace working but the ethernet not.
=20
Just an idea:
For the sysace driver in the 2.6 kernel the old device file entries don't work anymore.
=20
Do you have the correct device nodes in /dev? You can create those nodes with the following commands:
=20
Quoted 27 lines
# mknod -m 660 xsa b 254 0 # mknod -m 660 xsa1 b 254 1 # mknod -m 660 xsa2 b 254 2 # mknod -m 660 xsa3 b 254 3 =20 =20 Concerning the ethernet...: ;-) Which IP Type do you have for the Ethernet_MAC? Mine is xps_ethernetlite but I can't find a linux driver which seems to work with this one. =20 regards, Jan =20 =20 On Mon, Dec 15, 2008 at 01:12:18 -0800, xavier.vvv wrote:Quoted 11 lines
=20
Hi,
I have installed linux 2.6 on the xupv2p board. I have uart, ethernet, but
sysace device is not working.
I have seen in this forum that other persons have the problem. Could you tell me if you have sysace driver working?
Also I want to install xenomai, but the problem is that linux from denx tree
does not supportopb_emacethernet=20
driver. I need Ethernet because I use nfs to access the root file system=
.
Quoted 8 lines
Quoted 8 lines
So another question is:=20
when you installed xenomai, where was the rfs? and did you used Ethernet driver?
=20
Thanks
=20
=20
Joachim Meyer wrote:
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
=20
Hi
=20
I installed (with some help of this mailinglist) a Linux (Kernel 2.6.2=
3
Quoted 5 lines
Quoted 5 lines
Quoted 1 line
from xilinx) on a ppc405 of a Virtex 2 PRO on a XUPV2P. Then I
installed
Quoted 1 line
Xenomai. Now I want to control some devices from the Board, so I
thought
Quoted 1 line
first I try to turn the LEDs on and of. I enabled the LEDs in my Desig=
n
Quoted 16 lines
Quoted 16 lines
Quoted 2 lines
without interrupt and also compiled the Kernel with Xilinx OPG GPIO support. But I don't know realy how to go on. I found only 2 pages in
the
Quoted 2 lines
internet which gave me a bit of information, but nothing helped me. Can Anyone explain me what I have to do, or send me a link to a page
where
Quoted 10 lines
it is explained?
=20
The 2 pages I found:
--------------------------
http://osdir.com/ml/linux.uclinux.microblaze/2005-08/msg00120.html
http://www.tango-controls.org/Members/jbutanowicz/tango-on-ml403
=20
The output of the kernel while booting:
-------------------------------------------------
Linux version 2.6.23xlnx (meyer@tiv007) (gcc version 3.4.5) #1 Thu Jul
Quoted 3 lines
Quoted 3 lines
17
Quoted 2 lines
12:10:27 CEST 2008
Xilinx Generic PowerPC board support package (Xilinx XUPV2P) (Virtex-I=
I
Quoted 140 lines
Quoted 140 lines
Quoted 140 lines
Pro)
Zone PFN ranges:
DMA 0 -> 65536
Normal 65536 -> 65536
Movable zone start PFN for each node
early_node_map[1] active PFN ranges0: 0 -> 65536Built 1 zonelists in Zone order. Total pages: 65024
Kernel command line: console=3DttyUL0 root=3D/dev/xsa2 rw Xilinx INTC #0 at0x41200000mapped to0xFDFFF000
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x25
Console: Xilinx UART Lite
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 257664k available (1580k kernel code, 500k data, 96k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Registering device uartlite:0
Registering device xsysace:0
Registering device xilinx_emac:0
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
uartlite.0: ttyUL0 at MMIO0x40600003(irq =3D 3) is a uartlite console [ttyUL0] enabled
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize System ACE at0x41800000mapped to0xD1020000, irq=3D1, 500472KB
xsa: xsa1 xsa2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>xilinx_emacxilinx_emac.0: MAC address is now 2: 0: 0: 0: 0: 0
XEmac: using fifo mode.
XEmac: Detected PHY at address 0, ManufID0x0013, Rev.0x78e2.
eth0: DroppingNETIF_F_SGsince no checksum feature.
eth0: Xilinx 10/100 EMAC at0x80400000mapped to0xD1040000, irq=3D2
eth0: XEmac id 1.1a, block id 32, type 1
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on xsa2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing unused kernel memory: 96k init
INIT: version 2.85 booting
Welcome to DENX Embedded Linux Environment Press 'I' to enter interactive startup.
Building the cache [ OK ]
storage network audio done[ OK ]
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
Setting clock : Thu Jan 1 00:00:20 UTC 1970 [ OK ] Setting hostname localhost: [ OK ]
Checking filesystems
Checking all file systems.
[ OK ]Mounting local filesystems: [ OK ] Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Bringing up loopback interface: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged Starting portmap: [ OK ] Mounting NFS filesystems: XSysAce: Queue is plugged[ OK ]
XSysAce: Queue is plugged
Mounting other filesystems: [ OK ]
=20
DENX ELDK version 4.1 build 2007-01-19
Linux 2.6.23xlnx on a ppc
=20
localhost login:
=20
=20
=20
=20
=20
Thanks and Greez
Joachim
Quoted 1 line
Quoted 1 line
________________________________________________________________________=
_
Quoted 10 lines
Quoted 10 lines
Quoted 1 line
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und
gestalten!=20
Quoted 8 lines
Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=3D021114
=20
_______________________________________________
Linuxppc-embedded mailing list [email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=20
=20
Quoted 4 lines
Quoted 4 lines
=20
--=20
View this message in context:
http://www.nabble.com/use-xilinx-gpio-from-linux-on-a-ppc405-tp18507061p=
21010485.html
Quoted 6 lines
Quoted 6 lines
Sent from the linuxppc-embedded mailing list archive at Nabble.com. =20
_______________________________________________
Linuxppc-embedded mailing list [email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
Quoted 6 lines
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=20
=20
--=20
View this message in context: http://www.nabble.com/use-xilinx-gpio-from-li=
nux-on-a-ppc405-tp18507061p21012378.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
Hi Xavier
I downloaded the linux kernel from the xilinx git archives:
git clone git://git.xilinx.com/linux-2.6-xlnx.git
Quoted 4 lines · xavier.vvv
Hi Jan,
I used EDK 9.1 and I have theopb_emacethernet controller.
I selected Xilinx 10/100 opb emac support in linux 2.6 configuration (device
In EDK 9.1 I also used the opb_emac controller. But for the fun of it I would love to use the newer EDK 10.1 (Well, not purely for fun. I hope to see better performance with the mpmc DDR)
But it looks like there is no chance to get my XUPV2P properly working with EDK 10.1... Just to bad.
Quoted 3 lines
drivers/Network device support/ Ethernet (10 or 100Mbit) ). Concerning sysace, you have downloaded linux 2.6 from denx or xilinx tree? I will try creating xsa nodes . Hope that it will work.
Yes, hopefully it will work for you.
regards,
Jan
Quoted 257 lines
Thanks
XavierQuoted 244 lines · Jan Müller
Hi,
This is interesting...
I have the sysace working but the ethernet not.
Just an idea:
For the sysace driver in the 2.6 kernel the old device file entries don't work anymore.Do you have the correct device nodes in /dev? You can create those nodes with the following commands:
# mknod -m 660 xsa b 254 0 # mknod -m 660 xsa1 b 254 1 # mknod -m 660 xsa2 b 254 2 # mknod -m 660 xsa3 b 254 3Concerning the ethernet...: ;-)
Which IP Type do you have for theEthernet_MAC? Mine isxps_ethernetlitebut I can't find a linux driver which seems to work with this one.regards,
JanQuoted 190 lines · xavier.vvv
Hi,
I have installed linux 2.6 on the xupv2p board. I have uart, ethernet, but
sysace device is not working.
I have seen in this forum that other persons have the problem. Could you tell me if you have sysace driver working?
Also I want to install xenomai, but the problem is that linux from denx tree
does not supportopb_emacethernet
driver. I need Ethernet because I use nfs to access the root file system. So another question is:
when you installed xenomai, where was the rfs? and did you used Ethernet driver?Thanks
Quoted 5 lines · Joachim Meyer
Hi
I installed (with some help of this mailinglist) a Linux (Kernel 2.6.23 from xilinx) on a ppc405 of a Virtex 2 PRO on a XUPV2P. Then I
installed
Quoted 1 line
Xenomai. Now I want to control some devices from the Board, so I
thought
Quoted 3 lines
first I try to turn the LEDs on and of. I enabled the LEDs in my Design without interrupt and also compiled the Kernel with Xilinx OPG GPIO support. But I don't know realy how to go on. I found only 2 pages in
the
Quoted 2 lines
internet which gave me a bit of information, but nothing helped me. Can Anyone explain me what I have to do, or send me a link to a page
where
Quoted 10 lines
it is explained?
The 2 pages I found:
--------------------------
http://osdir.com/ml/linux.uclinux.microblaze/2005-08/msg00120.html
http://www.tango-controls.org/Members/jbutanowicz/tango-on-ml403The output of the kernel while booting:
-------------------------------------------------
Linux version 2.6.23xlnx (meyer@tiv007) (gcc version 3.4.5) #1 Thu Jul17
Quoted 133 lines
12:10:27 CEST 2008
Xilinx Generic PowerPC board support package (Xilinx XUPV2P) (Virtex-II Pro)
Zone PFN ranges:
DMA 0 -> 65536
Normal 65536 -> 65536
Movable zone start PFN for each node
early_node_map[1] active PFN ranges0: 0 -> 65536Built 1 zonelists in Zone order. Total pages: 65024
Kernel command line: console=ttyUL0 root=/dev/xsa2 rw Xilinx INTC #0 at0x41200000mapped to0xFDFFF000
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x25
Console: Xilinx UART Lite
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 257664k available (1580k kernel code, 500k data, 96k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Registering device uartlite:0
Registering device xsysace:0
Registering device xilinx_emac:0
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
uartlite.0: ttyUL0 at MMIO0x40600003(irq = 3) is a uartlite console [ttyUL0] enabled
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize System ACE at0x41800000mapped to0xD1020000, irq=1, 500472KB
xsa: xsa1 xsa2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>xilinx_emacxilinx_emac.0: MAC address is now 2: 0: 0: 0: 0: 0
XEmac: using fifo mode.
XEmac: Detected PHY at address 0, ManufID0x0013, Rev.0x78e2.
eth0: DroppingNETIF_F_SGsince no checksum feature.
eth0: Xilinx 10/100 EMAC at0x80400000mapped to0xD1040000, irq=2
eth0: XEmac id 1.1a, block id 32, type 1
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on xsa2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing unused kernel memory: 96k init
INIT: version 2.85 booting
Welcome to DENX Embedded Linux Environment Press 'I' to enter interactive startup.
Building the cache [ OK ]
storage network audio done[ OK ]
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
Setting clock : Thu Jan 1 00:00:20 UTC 1970 [ OK ] Setting hostname localhost: [ OK ]
Checking filesystems
Checking all file systems.
[ OK ]Mounting local filesystems: [ OK ] Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Bringing up loopback interface: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged XSysAce: Queue is plugged Starting portmap: [ OK ] Mounting NFS filesystems: XSysAce: Queue is plugged[ OK ]
XSysAce: Queue is plugged
Mounting other filesystems: [ OK ]DENX ELDK version 4.1 build 2007-01-19
Linux 2.6.23xlnx on a ppcQuoted 9 lines
localhost login:
Thanks and Greez
Joachim_________________________________________________________________________
Quoted 1 line
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und
gestalten!
Quoted 18 lines
Quoted 8 lines
Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embeddedSignature · 8 lines
View this message in context: http://www.nabble.com/use-xilinx-gpio-from-linux-on-a-ppc405-tp18507061p21010485.html Sent from the linuxppc-embedded mailing list archive at Nabble.com. _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embeddedSignature · 7 lines
View this message in context: http://www.nabble.com/use-xilinx-gpio-from-linux-on-a-ppc405-tp18507061p21012378.html Sent from the linuxppc-embedded mailing list archive at Nabble.com. _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded