ath9k: Fix ETSI compliance for AR9462 2.0
PATCH 1/1 ath9k: Fix ETSI compliance for AR9462 2.0
From: Sujith Manoharan <[email protected]>
The minimum CCA power threshold values have to be adjusted for existing cards to be in compliance with new regulations. Newer cards will make use of the values obtained from EEPROM, support for this was added earlier. To make sure that cards that are already in use and don't have proper values in EEPROM, do not violate regulations, use the initvals instead.
--- drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h +2 -2
@@ -57,7 +57,7 @@ static const u32 ar9462_2p0_baseband_postamble[][5] = { {0x00009e14, 0x37b95d5e, 0x37b9605e, 0x3236605e, 0x32365a5e}, {0x00009e18, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c}, - {0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce}, + {0x00009e20, 0x000003a5, 0x000003a5, 0x000003a5, 0x000003a5}, {0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021}, {0x00009e3c, 0xcf946220, 0xcf946220, 0xcfd5c782, 0xcfd5c282}, {0x00009e44, 0x62321e27, 0x62321e27, 0xfe291e27, 0xfe291e27},
@@ -96,7 +96,7 @@ static const u32 ar9462_2p0_baseband_postamble[][5] = { {0x0000ae04, 0x001c0000, 0x001c0000, 0x001c0000, 0x00100000}, {0x0000ae18, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000ae1c, 0x0000019c, 0x0000019c, 0x0000019c, 0x0000019c}, - {0x0000ae20, 0x000001b5, 0x000001b5, 0x000001ce, 0x000001ce}, + {0x0000ae20, 0x000001a6, 0x000001a6, 0x000001aa, 0x000001aa}, {0x0000b284, 0x00000000, 0x00000000, 0x00000550, 0x00000550}, };
Signature · 1 line
1.8.5.4
PATCH 1/1 ath9k: Fix ETSI compliance for AR9462 2.0
Quoted 9 lines · Sujith Manoharan
From: Sujith Manoharan <[email protected]>
The minimum CCA power threshold values have to be adjusted for existing cards to be in compliance with new regulations. Newer cards will make use of the values obtained from EEPROM, support for this was added earlier. To make sure that cards that are already in use and don't have proper values in EEPROM, do not violate regulations, use the initvals instead.
Quoted 3 lines
Cc stable at vger.kernel.orgReported-by Jeang Daniel <[email protected]>Signed-off-by Sujith Manoharan <[email protected]>
Wouldn't it be better to do this for all AR93xx chipsets in ar9003_hw_apply_minccapwr_thresh instead of initvals?
I'm pretty sure this patch will leave most other devices non-compliant.
- Felix
PATCH 1/1 ath9k: Fix ETSI compliance for AR9462 2.0
Quoted 3 lines · Felix Fietkau
Wouldn't it be better to do this for all AR93xx chipsets in
ar9003_hw_apply_minccapwr_threshinstead of initvals?
I'm pretty sure this patch will leave most other devices non-compliant.
The threshold values are adjusted for each chip and are not the same for all chips in the AR9003 family, so this is done in the initvals.
ar9003_hw_apply_minccapwr_thresh() will be used only for chips which contain the new 'MinCCApwr' field in struct ar9300_BaseExtension_1. This is not present in almost all the AR9003-family chips. I believe it has been introduced in AR955x.
Sujith
PATCH 1/1 ath9k: Fix ETSI compliance for AR9462 2.0
Quoted 7 lines · Sujith Manoharan
Quoted 3 lines · Felix Fietkau
Wouldn't it be better to do this for all AR93xx chipsets in
ar9003_hw_apply_minccapwr_threshinstead of initvals?
I'm pretty sure this patch will leave most other devices non-compliant.The threshold values are adjusted for each chip and are not the same for all chips in the AR9003 family, so this is done in the initvals.
Almost all chips are using the same values in the initvals - the exceptions seem to be the ones that have had ETSI compliance fix attempts already. I'm pretty sure the new values (if adjusted for different bands) would be fully compatible.
Quoted 4 lines
ar9003_hw_apply_minccapwr_thresh()will be used only for chips which contain the new 'MinCCApwr' field in structar9300_BaseExtension_1. This is not present in almost all the AR9003-family chips. I believe it has been introduced in AR955x.
I know. What I meant is that in case the EEPROM does not have any values, we can make it use reasonable fixed defaults, thus overriding the values from the initvals.
- Felix
PATCH 1/1 ath9k: Fix ETSI compliance for AR9462 2.0
Quoted 4 lines · Felix Fietkau
Almost all chips are using the same values in the initvals - the exceptions seem to be the ones that have had ETSI compliance fix attempts already. I'm pretty sure the new values (if adjusted for different bands) would be fully compatible.
For most of the chips, adjusting AR_PHY_CCA_MAX_GOOD_VAL_9300_2GHZ/5GHZ from the previous values to -60 is sufficient and the initvals don't need any changes to be compliant. For some chips, the change in the max. CCA threshold require adjustments in the minCCApwr_thr field - it is easier to do this via the initvals.
This has been done for AR9485, AR9462 and AR9565 so far.
AR9485: new value is -50 dB
AR9565: new value is -92 dB
AR9462:
chain 0 : 2G: -91dB, 5G: -88dB
chain 1 : 2G: -91dB, 5G: -90dB
The SoC chips do not have any corresponding changes in minCCApwr_thr for the new CCA_MAX_GOOD_VAL. The only weird exception is AR9331 which has new minCCApwr_thr values in the internal PCOEM driver, but not in the SoC driver - not sure which one is correct.
Sujith