ath10k-firmware: QCA4019 hw1.0/QCA9888 hw2.0: Add OpenMesh A62 specific BDFs
Hi,
I am currently starting to prepare the OpenMesh A62 support for Openwrt. This AP requires three special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't provide special IDs for customers and seems to use the AP-DK board-ids in the wifi firmware to change its behavior.
Now to the questions from the wiki page [1]:
* description for what hardware this is:
- it is a QCA4018 based module (based on qcom-ipq4019-ap.dk04.1)
- one QCA4018 radio is used as 2.4GHz radio
- one QCA4018 radio is used as 5GHz radio
- an additional QCA9888 5GHz radio is attached via PCI
* origin of the board file (did you create it yourself or where you downloaded)
- it was created by the ODM and QCA for the OpenMesh A62
- was provided by the ODM to OpenMesh for this product (this includes distribution)
- it is the latest release from 2018-03-29
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62
sha256sum:
df5dc5a55506e2a58dcb0b8542f40226d3bfd530a6fc0bc90c728ab18a57144c
+ bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62
sha256sum:
96c3d044fe26522c75313c210ace6f85d5bdcdbce3350214d92467501a01fb88- QCA9888 hw2.0
+ bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62
sha256sum:
c85b23763e748abeb7e8c42e243dab1fc58d1bff94111e4058bdf31ddb14cefa* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
Sven
[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 11 lines · Sven Eckelmann
* ids to be used with the board file (
ATH10K_BD_IE_BOARD_NAMEin ath10k)- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62 sha256sum: df5dc5a55506e2a58dcb0b8542f40226d3bfd530a6fc0bc90c728ab18a57144c + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62 sha256sum: 96c3d044fe26522c75313c210ace6f85d5bdcdbce3350214d92467501a01fb88
Quoted 5 lines
- QCA9888 hw2.0
+ bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 sha256sum: c85b23763e748abeb7e8c42e243dab1fc58d1bff94111e4058bdf31ddb14cefa
BTW, in the future md5sum would be more useful as ath10k-bdencoder --info prints that. I added that to the wiki as well:
https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
Signature · 6 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 36 lines · Sven Eckelmann
I am currently starting to prepare the OpenMesh A62 support for Openwrt. This AP requires three special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't provide special IDs for customers and seems to use the AP-DK board-ids in the wifi firmware to change its behavior.
Now to the questions from the wiki page [1]:
* description for what hardware this is:
- it is a QCA4018 based module (based on qcom-ipq4019-ap.dk04.1)
- one QCA4018 radio is used as 2.4GHz radio
- one QCA4018 radio is used as 5GHz radio
- an additional QCA9888 5GHz radio is attached via PCI* origin of the board file (did you create it yourself or where you downloaded)
- it was created by the ODM and QCA for the OpenMesh A62
- was provided by the ODM to OpenMesh for this product (this includes distribution)
- it is the latest release from 2018-03-29* ids to be used with the board file (
ATH10K_BD_IE_BOARD_NAMEin ath10k)- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62 sha256sum: df5dc5a55506e2a58dcb0b8542f40226d3bfd530a6fc0bc90c728ab18a57144c + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62 sha256sum: 96c3d044fe26522c75313c210ace6f85d5bdcdbce3350214d92467501a01fb88- QCA9888 hw2.0
Quoted 8 lines
+ bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 sha256sum: c85b23763e748abeb7e8c42e243dab1fc58d1bff94111e4058bdf31ddb14cefa* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
I added these now, please check the results:
https://github.com/kvalo/ath10k-firmware/commit/a262aac7cfe5ae5833378b4f1b0634f873a4df4d
New:
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62
Changed:
Deleted:
1 board image(s) added, 0 changed, 0 deleted, 14 in total
New:
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62
Changed:
Deleted:
1 board image(s) added, 0 changed, 0 deleted, 15 in total
New:
bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62
Changed:
Deleted:
1 board image(s) added, 0 changed, 0 deleted, 16 in total
Signature · 5 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
On Donnerstag, 19. April 2018 10:20:41 CEST Kalle Valo wrote:
[...]
Quoted 14 lines
Quoted 14 lines
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62 sha256sum: df5dc5a55506e2a58dcb0b8542f40226d3bfd530a6fc0bc90c728ab18a57144c + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62 sha256sum: 96c3d044fe26522c75313c210ace6f85d5bdcdbce3350214d92467501a01fb88- QCA9888 hw2.0
+ bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 sha256sum: c85b23763e748abeb7e8c42e243dab1fc58d1bff94111e4058bdf31ddb14cefa
[...]
Quoted 3 lines
I added these now, please check the results:
a262aac7cfe5ae5833378b4f1b0634f873a4df4d
Quoted 1 line
Unfortunately, this is wrong. Please check the mail again. The bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the QCA9888 hw2.0 board-2.bin and not the QCA4019 hw1.0.
Kind regards,
Sven
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 19 lines · Sven Eckelmann
On Donnerstag, 19. April 2018 10:20:41 CEST Kalle Valo wrote:
[...]Quoted 14 lines
Quoted 14 lines
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62 sha256sum: df5dc5a55506e2a58dcb0b8542f40226d3bfd530a6fc0bc90c728ab18a57144c + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62 sha256sum: 96c3d044fe26522c75313c210ace6f85d5bdcdbce3350214d92467501a01fb88- QCA9888 hw2.0
+ bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 sha256sum: c85b23763e748abeb7e8c42e243dab1fc58d1bff94111e4058bdf31ddb14cefa[...]
Quoted 2 lines
I added these now, please check the results:
Quoted 7 lines
Quoted 1 line
a262aac7cfe5ae5833378b4f1b0634f873a4df4dQuoted 1 line
Unfortunately, this is wrong. Please check the mail again. The bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the QCA9888 hw2.0 board-2.bin and not the QCA4019 hw1.0.
Thanks for noticing, I'll fix that. But please separate different hw to different mails, this way I can process them one hw version at the time.
Signature · 5 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 25 lines · Kalle Valo
Quoted 23 lines · Sven Eckelmann
On Donnerstag, 19. April 2018 10:20:41 CEST Kalle Valo wrote:
[...]Quoted 14 lines
Quoted 14 lines
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62 sha256sum: df5dc5a55506e2a58dcb0b8542f40226d3bfd530a6fc0bc90c728ab18a57144c + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62 sha256sum: 96c3d044fe26522c75313c210ace6f85d5bdcdbce3350214d92467501a01fb88- QCA9888 hw2.0
+ bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 sha256sum: c85b23763e748abeb7e8c42e243dab1fc58d1bff94111e4058bdf31ddb14cefa[...]
Quoted 3 lines
I added these now, please check the results:
a262aac7cfe5ae5833378b4f1b0634f873a4df4dQuoted 1 line
Quoted 6 lines
Quoted 3 lines
Unfortunately, this is wrong. Please check the mail again. The bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the QCA9888 hw2.0 board-2.bin and not the QCA4019 hw1.0.
Thanks for noticing, I'll fix that. But please separate different hw to different mails, this way I can process them one hw version at the time.
Fixed now, please double check:
https://github.com/kvalo/ath10k-firmware/commit/a315471a5f4c9890e2ed1bdb008b7aae5c885ae0
https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663
Signature · 5 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 4 lines · On Donnerstag, 19. April 2018 14:33:04 CEST Kalle Valo wrote:
Quoted 4 lines
Quoted 3 lines
Unfortunately, this is wrong. Please check the mail again. The bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the QCA9888 hw2.0 board-2.bin and not the QCA4019 hw1.0.
Quoted 8 lines
Quoted 2 lines
Thanks for noticing, I'll fix that. But please separate different hw to different mails, this way I can process them one hw version at the time.
Fixed now, please double check:
https://github.com/kvalo/ath10k-firmware/commit/a315471a5f4c9890e2ed1bdb008b7aae5c885ae0
https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663
Ok, will use md5sum and split my submission based on the wifi hw.
The board-2.bin's look fine now.
pending
=======
* Asus RT-AC58U
- submitted before the guide was published
- http://lists.infradead.org/pipermail/ath10k/2017-March/009454.html
* Netgear EX6100v2/EX6150v2
- http://lists.infradead.org/pipermail/ath10k/2018-February/010845.html
* 8devices Jalapeno
- http://lists.infradead.org/pipermail/ath10k/2018-March/010916.html
accepted
========
* OpenMesh A42
- http://lists.infradead.org/pipermail/ath10k/2017-November/010470.html
- http://lists.infradead.org/pipermail/ath10k/2017-December/010543.html
- https://github.com/kvalo/ath10k-firmware/commit/5cd2bacd8e22217335e539b416d0cb8d59f8e312
* Meraki MR33
- http://lists.infradead.org/pipermail/ath10k/2018-April/011179.html
- https://github.com/kvalo/ath10k-firmware/commit/66be3a48d9cf17ace8413cf478a5954483393af4
* Compex WLE1216V5-20 + Compex ?
- http://lists.infradead.org/pipermail/ath10k/2018-March/010998.html
- https://github.com/kvalo/ath10k-firmware/commit/b1dd338046a385743c483a47e8eef276adaba0c0
* AVM FRITZ!Box 4040
- http://lists.infradead.org/pipermail/ath10k/2018-April/011178.html
- https://github.com/kvalo/ath10k-firmware/commit/81a745e6a529565438ee4aea357a8a59e9564848
* OpenMesh A62
- http://lists.infradead.org/pipermail/ath10k/2018-March/011081.html
- https://github.com/kvalo/ath10k-firmware/commit/a262aac7cfe5ae5833378b4f1b0634f873a4df4d
- https://github.com/kvalo/ath10k-firmware/commit/a315471a5f4c9890e2ed1bdb008b7aae5c885ae0
- https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663
* GL.iNet GL-B1300
- http://lists.infradead.org/pipermail/ath10k/2018-March/011058.html
- https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663
Kind regards,
Sven
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 8 lines · Sven Eckelmann
Quoted 7 lines · On Donnerstag, 19. April 2018 14:33:04 CEST Kalle Valo wrote:
Quoted 6 lines
Quoted 3 lines
Unfortunately, this is wrong. Please check the mail again. The bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the QCA9888 hw2.0 board-2.bin and not the QCA4019 hw1.0.
Thanks for noticing, I'll fix that. But please separate different hw to different mails, this way I can process them one hw version at the time.
Quoted 8 lines
Quoted 5 lines
Fixed now, please double check:
https://github.com/kvalo/ath10k-firmware/commit/a315471a5f4c9890e2ed1bdb008b7aae5c885ae0
https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663
Ok, will use md5sum and split my submission based on the wifi hw.
BTW, I also updated the documentation about this:
https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
Quoted 1 line
The board-2.bin's look fine now.
Great, thanks for testing.
Quoted 8 lines
pending
=======* Asus RT-AC58U
- submitted before the guide was published
- http://lists.infradead.org/pipermail/ath10k/2017-March/009454.html
Quoted 7 lines
* Netgear EX6100v2/EX6150v2
- http://lists.infradead.org/pipermail/ath10k/2018-February/010845.html
* 8devices Jalapeno
- http://lists.infradead.org/pipermail/ath10k/2018-March/010916.html
Thanks for the list, it was really helpful. I think I have now added all pending board files, but please let me know if I missed anything.
Signature · 5 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 2 lines · On Donnerstag, 19. April 2018 15:11:21 CEST Kalle Valo wrote:
Thanks for the list, it was really helpful. I think I have now added all pending board files, but please let me know if I missed anything.
Sorry about missing the Asus RT-AC58U BDF update.
I went through added files and at least the ones submitted by me look fine (and I couldn't find anything problematic in the other ones). Thanks for going through all submissions and integrating them.
pending
=======
* Asus RT-AC58U
- waiting for v2 of the BDFs to be integrated
- http://lists.infradead.org/pipermail/ath10k/2018-January/010770.html
- v1 files: https://github.com/kvalo/ath10k-firmware/commit/a47bcf1e58c4d8914af0951a80fd8861368b700d
accepted
========
* OpenMesh A42
- http://lists.infradead.org/pipermail/ath10k/2017-November/010470.html
- http://lists.infradead.org/pipermail/ath10k/2017-December/010543.html
- https://github.com/kvalo/ath10k-firmware/commit/5cd2bacd8e22217335e539b416d0cb8d59f8e312
* Meraki MR33
- http://lists.infradead.org/pipermail/ath10k/2018-April/011179.html
- https://github.com/kvalo/ath10k-firmware/commit/66be3a48d9cf17ace8413cf478a5954483393af4
* Compex WLE1216V5-20 + Compex ?
- http://lists.infradead.org/pipermail/ath10k/2018-March/010998.html
- https://github.com/kvalo/ath10k-firmware/commit/b1dd338046a385743c483a47e8eef276adaba0c0
* AVM FRITZ!Box 4040
- http://lists.infradead.org/pipermail/ath10k/2018-April/011178.html
- https://github.com/kvalo/ath10k-firmware/commit/81a745e6a529565438ee4aea357a8a59e9564848
* OpenMesh A62
- http://lists.infradead.org/pipermail/ath10k/2018-March/011081.html
- https://github.com/kvalo/ath10k-firmware/commit/a262aac7cfe5ae5833378b4f1b0634f873a4df4d
- https://github.com/kvalo/ath10k-firmware/commit/a315471a5f4c9890e2ed1bdb008b7aae5c885ae0
- https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663
* GL.iNet GL-B1300
- http://lists.infradead.org/pipermail/ath10k/2018-March/011058.html
- https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663
* 8devices Jalapeno
- http://lists.infradead.org/pipermail/ath10k/2018-March/010916.html
- https://github.com/kvalo/ath10k-firmware/commit/71e50312b54cc972657a7b08c470088447cb9676
* Netgear EX6100v2/EX6150v2
- http://lists.infradead.org/pipermail/ath10k/2018-February/010845.html
- https://github.com/kvalo/ath10k-firmware/commit/dfe4b7de42e1c40dfd03526ffe7955089c4eef63
Kind regards,
Sven
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 19 lines · On Donnerstag, 19. April 2018 16:47:22 CEST Sven Eckelmann wrote:
Quoted 4 lines · On Donnerstag, 19. April 2018 14:33:04 CEST Kalle Valo wrote:
Quoted 4 lines
Quoted 3 lines
Unfortunately, this is wrong. Please check the mail again. The bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the QCA9888 hw2.0 board-2.bin and not the QCA4019 hw1.0.
Quoted 8 lines
Quoted 2 lines
Thanks for noticing, I'll fix that. But please separate different hw to different mails, this way I can process them one hw version at the time.
Fixed now, please double check:
https://github.com/kvalo/ath10k-firmware/commit/a315471a5f4c9890e2ed1bdb008b7aae5c885ae0
https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663
Ok, will use md5sum and split my submission based on the wifi hw.
The board-2.bin's look fine now.
Quoted 7 lines
pending
=======* Asus RT-AC58U
- submitted before the guide was published
- http://lists.infradead.org/pipermail/ath10k/2017-March/009454.html
I made a v2 back in 2018 January.
http://lists.infradead.org/pipermail/ath10k/2018-January/010770.html
This was necessary since ASUS updated the board file.
Regards,
Christian
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 25 lines · Christian Lamparter
Quoted 24 lines · On Donnerstag, 19. April 2018 16:47:22 CEST Sven Eckelmann wrote:
Quoted 4 lines · On Donnerstag, 19. April 2018 14:33:04 CEST Kalle Valo wrote:
Quoted 4 lines
Quoted 3 lines
Unfortunately, this is wrong. Please check the mail again. The bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the QCA9888 hw2.0 board-2.bin and not the QCA4019 hw1.0.
Quoted 8 lines
Quoted 2 lines
Thanks for noticing, I'll fix that. But please separate different hw to different mails, this way I can process them one hw version at the time.
Fixed now, please double check:
https://github.com/kvalo/ath10k-firmware/commit/a315471a5f4c9890e2ed1bdb008b7aae5c885ae0
https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663
Ok, will use md5sum and split my submission based on the wifi hw.
The board-2.bin's look fine now.
pending
=======* Asus RT-AC58U
Quoted 7 lines
Quoted 2 lines
- submitted before the guide was published
- http://lists.infradead.org/pipermail/ath10k/2017-March/009454.htmlI made a v2 back in 2018 January.
http://lists.infradead.org/pipermail/ath10k/2018-January/010770.html
This was necessary since ASUS updated the board file.
Oh, I missed that. I already pushed the update with 2017 board files, but I'll try to update them in the next few days.
Signature · 5 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k