Skip to contentSkip to conversation

ARM: dts: aspeed: santabarbara: Add swb cpld io expander

PATCH In review Fred Chen 2 participants 2 messages Jan 29 – Feb 9

Subsystems (2)
lore
Share & tools
lore

Fred Chen

author
#0 lore raw

PATCH 1/1 ARM: dts: aspeed: santabarbara: Add swb cpld io expander

Add CPLD-simulated IO expanders for cable presence detection and 4 SPI flash control. To resolve sideband pin shortages, one IO expander is utilized to aggregate interrupt signals.

---
 .../aspeed-bmc-facebook-santabarbara.dts      | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts +48 -0
index 0a3e2e241063..39f7fade8ff7 100644
@@ -1335,6 +1335,39 @@ eeprom@50 {
 &i2c12 {
 	status = "okay";
 
+	ioexp0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <148 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"IOEXP_21h_INT_N","","","",
+			"","","","",
+			"","","","",
+			"","","","";
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&ioexp0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"PDB_PRSNT_J1_N","PDB_PRSNT_J2_N",
+			"PRSNT_NIC1_N","PRSNT_NIC2_N",
+			"PRSNT_NIC3_N","PRSNT_NIC4_N",
+			"SWB_PWR_FAULT_STATUS","",
+			"CBL_PRSNT_MCIO_0_N","CBL_PRSNT_MCIO_1_N",
+			"CBL_PRSNT_MCIO_2_N","CBL_PRSNT_MCIO_3_N",
+			"","","","";
+	};
+
 	gpio@27 {
 		compatible = "nxp,pca9555";
 		reg = <0x27>;
@@ -1349,6 +1382,21 @@ gpio@27 {
 			"SPI_MUX_SEL","","","";
 	};
 
+	gpio@28 {
+		compatible = "nxp,pca9555";
+		reg = <0x28>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"SCO_UART_MUX_SEL0","SCO_UART_MUX_SEL1",
+			"SPI_PROG_PL12_SEL","SPI_PROG_PL34_SEL",
+			"","","","",
+			"I3C_HUB_3_MUX_SEL_PLD","",
+			"SPI_PROG_PL12_EN_N","SPI_PROG_PL34_EN_N",
+			"SCO1_SPI_SEL","SCO2_SPI_SEL",
+			"SCO3_SPI_SEL","SCO4_SPI_SEL";
+	};
+
 	// SWB FRU
 	eeprom@52 {
 		compatible = "atmel,24c64";
Signature · 1 line
2.52.0
maintainer
#1 lore raw
Quoted 2 lines · Fred Chen

Add CPLD-simulated IO expanders

If these are not genuine PCA9555 parts then I expect you should define your own compatible string for the implementation which allows nxp,pca9555 as a fallback. That way you can account for bugs in the implementation either way (either in the kernel if updating the CPLD firmware is not feasible in some situations, or by updating the firmware when it is).

Andrew

Quoted 75 lines

for cable presence detection and 4 SPI
flash control. To resolve sideband pin shortages, one IO expander is utilized to aggregate interrupt signals.

---
 .../aspeed-bmc-facebook-santabarbara.dts      | 48 +++++++++++++++++++

 1 file changed, 48 insertions(+)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts +0 -0
index 0a3e2e241063..39f7fade8ff7 100644
@@ -1335,6 +1335,39 @@ eeprom@50 {
  &i2c12 {
  	status = "okay";

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts +33 -0
+	ioexp0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <148 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"IOEXP_21h_INT_N","","","",
+			"","","","",
+			"","","","",
+			"","","","";
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&ioexp0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"PDB_PRSNT_J1_N","PDB_PRSNT_J2_N",
+			"PRSNT_NIC1_N","PRSNT_NIC2_N",
+			"PRSNT_NIC3_N","PRSNT_NIC4_N",
+			"SWB_PWR_FAULT_STATUS","",
+			"CBL_PRSNT_MCIO_0_N","CBL_PRSNT_MCIO_1_N",
+			"CBL_PRSNT_MCIO_2_N","CBL_PRSNT_MCIO_3_N",
+			"","","","";
+	};
+

  gpio@27 {
  compatible = "nxp,pca9555";
  reg = <0x27>;

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts +0 -0
@@ -1349,6 +1382,21 @@ gpio@27 {
  			"SPI_MUX_SEL","","","";
  	};

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts +15 -0
+	gpio@28 {
+		compatible = "nxp,pca9555";
+		reg = <0x28>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"SCO_UART_MUX_SEL0","SCO_UART_MUX_SEL1",
+			"SPI_PROG_PL12_SEL","SPI_PROG_PL34_SEL",
+			"","","","",
+			"I3C_HUB_3_MUX_SEL_PLD","",
+			"SPI_PROG_PL12_EN_N","SPI_PROG_PL34_EN_N",
+			"SCO1_SPI_SEL","SCO2_SPI_SEL",
+			"SCO3_SPI_SEL","SCO4_SPI_SEL";
+	};
+

  // SWB FRU
  eeprom@52 {
  compatible = "atmel,24c64";