Skip to contentSkip to conversation

MPC8313 with big sdram

U-Boot illeggy 2 participants 3 messages Jan 12, 2009

lore
Share & tools
lore

illeggy

author
#0 lore raw

u-boot-1.1.6.

my sdram is 512MB, with CS0_BNDS,DDRLAWAR0,DDRLAWBAR0 modified, 256MB of 512MB sdram can work perfectly.

Then, I defined CONFIG_VERY_BIG_RAM, 512MB can be recognized, but, I can only read and write 256MB, fault occurred when address move across 256MB.

besides CONFIG_VERY_BIG_RAM, what else should I do to support big sdram? Thanks!

Signature · 2 lines
View this message in context: http://www.nabble.com/MPC8313-with-big-sdram-tp21410907p21410907.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
#1 lore raw
Quoted 1 line

u-boot-1.1.6.

Suggest you use the latest u-boot as base, due to the u-boot/kernel interface has much change since 1.1.6.

Quoted 4 lines

my sdram is 512MB, with CS0_BNDS,DDRLAWAR0,DDRLAWBAR0 modified, 256MB of
512MB sdram can work perfectly.

Quoted 8 lines

Then, I defined CONFIG_VERY_BIG_RAM, 512MB can be recognized, but, I can
only read and write 256MB, fault occurred when address move across 256MB.

besides CONFIG_VERY_BIG_RAM, what else should I do to support big sdram?
Thanks!

Please check the DDR controller configuration according to your board. Did the ROW/COL address setup correctly?

author
#2 lore raw

all my other works have been done under this version, so I have no time to chage .
thanks any way.

Quoted 27 lines · Dave Liu-4 wrote:
Quoted 2 lines

u-boot-1.1.6.

Suggest you use the latest u-boot as base, due to the u-boot/kernel interface has much change since 1.1.6.

Quoted 4 lines

my sdram is 512MB, with CS0_BNDS,DDRLAWAR0,DDRLAWBAR0 modified, 256MB of
512MB sdram can work perfectly.

Quoted 8 lines

Then, I defined CONFIG_VERY_BIG_RAM, 512MB can be recognized, but, I can
only read and write 256MB, fault occurred when address move across 256MB.

besides CONFIG_VERY_BIG_RAM, what else should I do to support big sdram?
Thanks!

Please check the DDR controller configuration according to your board. Did the ROW/COL address setup correctly?
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Signature · 2 lines
View this message in context: http://www.nabble.com/MPC8313-with-big-sdram-tp21410907p21411148.html
Sent from the Uboot - Users mailing list archive at Nabble.com.