i2c: i801: Simplify class-based client device instantiation
PATCH 1/1 i2c: i801: Simplify class-based client device instantiation
Now that the legacy eeprom driver was removed, the only remaining i2c client driver with class SPD autodetection is jc42, and this driver supports also class HWMON. Therefore we can remove class SPD from the supported classes of the i801 adapter driver.
Legacy class-based instantiation shouldn't be used in new code, so I think we can remove also the generic logic that ensures that supported classes of parent and muxed adapters don't overlap.
Note: i801 parent supports just class HWMON now, and muxed childs class SPD, so the supported classes don't overlap.
--- drivers/i2c/busses/i2c-i801.c | 38 +++++++---------------------------- 1 file changed, 7 insertions(+), 31 deletions(-)
drivers/i2c/busses/i2c-i801.c +7 -31
@@ -285,7 +285,6 @@ struct i801_priv {u8 *data;#if IS_ENABLED (CONFIG_I2C_MUX_GPIO ) && definedCONFIG_DMI -const struct i801_mux_config *mux_drvdata;struct platform_device *mux_pdev;struct gpiod_lookup_table *lookup;#endif
@@ -1282,7 +1281,7 @@ static void i801_probe_optional_slaves(struct i801_priv *priv)/* Instantiate SPD EEPROMs unless the SMBus is multiplexed */ #if IS_ENABLED (CONFIG_I2C_MUX_GPIO ) - if (!priv->mux_drvdata) + if (!priv->mux_pdev)#endif i2c_register_spd (&priv->adapter); }
@@ -1384,11 +1383,14 @@ static void i801_add_mux(struct i801_priv *priv)const struct i801_mux_config *mux_config;struct i2c_mux_gpio_platform_data gpio_data;struct gpiod_lookup_table *lookup; +const struct dmi_system_id *id;int i; -if (!priv->mux_drvdata) + id =dmi_first_match (mux_dmi_table); +if (!id)return ; - mux_config = priv->mux_drvdata; + + mux_config = id->driver_data;/* Prepare the platform data */ memset (&gpio_data,0 ,sizeof (struct i2c_mux_gpio_platform_data ));
@@ -1432,35 +1434,9 @@ static void i801_del_mux(struct i801_priv *priv)platform_device_unregister (priv->mux_pdev);gpiod_remove_lookup_table (priv->lookup); } - -static unsigned int i801_get_adapter_class (struct i801_priv *priv) -{ -const struct dmi_system_id *id; -const struct i801_mux_config *mux_config; -unsigned int class =I2C_CLASS_HWMON |I2C_CLASS_SPD ; -int i; - - id =dmi_first_match (mux_dmi_table); -if (id) { -/* Remove branch classes from trunk */ - mux_config = id->driver_data; -for (i =0 ; i < mux_config->n_values; i++) - class &= ~mux_config->classes[i]; - -/* Remember for later */ - priv->mux_drvdata = mux_config; - } - -return class; -}#else static inline void i801_add_mux (struct i801_priv *priv) { }static inline void i801_del_mux (struct i801_priv *priv) { } - -static inline unsigned int i801_get_adapter_class (struct i801_priv *priv) -{ -return I2C_CLASS_HWMON |I2C_CLASS_SPD ; -}#endif static struct platform_device *
@@ -1641,7 +1617,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)i2c_set_adapdata (&priv->adapter, priv); priv->adapter.owner =THIS_MODULE ; - priv->adapter.class =i801_get_adapter_class (priv); + priv->adapter.class =I2C_CLASS_HWMON ; priv->adapter.algo = &smbus_algorithm; priv->adapter.dev.parent = &dev->dev;ACPI_COMPANION_SET (&priv->adapter.dev,ACPI_COMPANION (&dev->dev));
Signature · 1 line
2.42.0
Andi Shyti
maintainerHi,
Quoted 8 lines · Heiner Kallweit
Now that the legacy eeprom driver was removed, the only remaining i2c client driver with class SPD autodetection is jc42, and this driver supports also class HWMON. Therefore we can remove class SPD from the supported classes of the i801 adapter driver.
Legacy class-based instantiation shouldn't be used in new code, so I think we can remove also the generic logic that ensures that supported classes of parent and muxed adapters don't overlap.
Quoted 4 lines
Note: i801 parent supports just class HWMON now, and muxed childs class SPD, so the supported classes don't overlap.
Signed-off-by Heiner Kallweit <[email protected]>
Don't see anything odd here, Jean, any idea here?
Andi
Hi Heiner, Andi,
Quoted 3 lines · Heiner Kallweit
Now that the legacy eeprom driver was removed, the only remaining i2c client driver with class SPD autodetection is jc42, and this driver supports also class HWMON. Therefore we can remove class SPD from the
I did not notice this change when it happened back in 2016. This broke the i2c-i801 driver as a side effect, because the Asus-specific mux code assumes that no I2C device driver can probe both the SMBus trunk and the SMBus segments behind the muxes. This is done (as you must know as this patch touches that part of the code) by ensuring that the trunk and the muxed segments do not share any class flag. This was sufficient as long as all device driver themselves only registered for one class, but this is no longer the case of the jc42 driver.
So loading the jc42 driver on one of these Asus server board systems would possibly result in multiple jc42 devices being instantiated for the same underlying hardware device. The one instantiated on the trunk would return incorrect values or errors depending on the mux setting.
Probably this went unnoticed because nobody was running such old server boards when the change happened, or they would stick to older kernel versions.
Quoted 4 lines
supported classes of the i801 adapter driver.
Legacy class-based instantiation shouldn't be used in new code, so I think we can remove also the generic logic that ensures that supported classes of parent and muxed adapters don't overlap.
Agreed. If we were to add support for a new server board with muxed SMBus, we would disable class-based probing and instead explicitly instantiate devices. To be honest, I don't know why we didn't do that for the Asus Z8 series already, as I think it was already available, and it would have made the code a lot more simple.
If anyone ever complains about the bug mentioned above, then we'll have to do it anyway.
Quoted 1 line
Note: i801 parent supports just class HWMON now, and muxed childs
"children" ^^
Quoted 7 lines
class SPD, so the supported classes don't overlap.
Signed-off-by Heiner Kallweit <[email protected]>--- drivers/i2c/busses/i2c-i801.c | 38 +++++++---------------------------- 1 file changed, 7 insertions(+), 31 deletions(-)(...)
Fine with me.
Signature · 2 lines
Jean Delvare SUSE L3 Support
Andi Shyti
maintainerHi Jean,
Quoted 16 lines · Jean Delvare
Hi Heiner, Andi,
Quoted 3 lines · Heiner Kallweit
Now that the legacy eeprom driver was removed, the only remaining i2c client driver with class SPD autodetection is jc42, and this driver supports also class HWMON. Therefore we can remove class SPD from the
I did not notice this change when it happened back in 2016. This broke the i2c-i801 driver as a side effect, because the Asus-specific mux code assumes that no I2C device driver can probe both the SMBus trunk and the SMBus segments behind the muxes. This is done (as you must know as this patch touches that part of the code) by ensuring that the trunk and the muxed segments do not share any class flag. This was sufficient as long as all device driver themselves only registered for one class, but this is no longer the case of the jc42 driver.
Quoted 8 lines
So loading the jc42 driver on one of these Asus server board systems would possibly result in multiple jc42 devices being instantiated for the same underlying hardware device. The one instantiated on the trunk would return incorrect values or errors depending on the mux setting.
Probably this went unnoticed because nobody was running such old server boards when the change happened, or they would stick to older kernel versions.
thanks for clarifying!
Andi
Quoted 33 lines
Quoted 4 lines
supported classes of the i801 adapter driver.
Legacy class-based instantiation shouldn't be used in new code, so I think we can remove also the generic logic that ensures that supported classes of parent and muxed adapters don't overlap.Agreed. If we were to add support for a new server board with muxed SMBus, we would disable class-based probing and instead explicitly instantiate devices. To be honest, I don't know why we didn't do that for the Asus Z8 series already, as I think it was already available, and it would have made the code a lot more simple.
If anyone ever complains about the bug mentioned above, then we'll have to do it anyway.
Quoted 1 line
Note: i801 parent supports just class HWMON now, and muxed childs
"children" ^^
Quoted 7 lines
class SPD, so the supported classes don't overlap.
Signed-off-by Heiner Kallweit <[email protected]>--- drivers/i2c/busses/i2c-i801.c | 38 +++++++---------------------------- 1 file changed, 7 insertions(+), 31 deletions(-)(...)
Fine with me.
Reviewed-by Jean Delvare <[email protected]>Signature · 2 lines
Jean Delvare SUSE L3 Support
Hi Heiner,
Quoted 8 lines · Heiner Kallweit
Now that the legacy eeprom driver was removed, the only remaining i2c client driver with class SPD autodetection is jc42, and this driver supports also class HWMON. Therefore we can remove class SPD from the supported classes of the i801 adapter driver.
Legacy class-based instantiation shouldn't be used in new code, so I think we can remove also the generic logic that ensures that supported classes of parent and muxed adapters don't overlap.
Quoted 4 lines
Note: i801 parent supports just class HWMON now, and muxed childs class SPD, so the supported classes don't overlap.
Signed-off-by Heiner Kallweit <[email protected]>
Andi
Wolfram Sang
AppliedQuoted 8 lines · Heiner Kallweit
Now that the legacy eeprom driver was removed, the only remaining i2c client driver with class SPD autodetection is jc42, and this driver supports also class HWMON. Therefore we can remove class SPD from the supported classes of the i801 adapter driver.
Legacy class-based instantiation shouldn't be used in new code, so I think we can remove also the generic logic that ensures that supported classes of parent and muxed adapters don't overlap.
Quoted 4 lines
Note: i801 parent supports just class HWMON now, and muxed childs class SPD, so the supported classes don't overlap.
Signed-off-by Heiner Kallweit <[email protected]>
Applied to for-next, thanks!