unregister_ioctl32_conversion and modules. ioctl32 revisited.
Subsystems (20)
Hallo,
There seems to be an unfixable module unload race in the current register_ioctl32_conversion support. The problem is that there is no way to wait for a conversion handler is blocked in a sleeping *_user access before module unloading. The module count is also not increase in this case.
I previously thought it could be avoided by always putting the compat wrapper into the same module and using the reference counting that is done by VFS on ->module of the char device or file system converted. But that doesn't work because the ioctl32 lookup is independent from the file descriptor and a conversion handler can be entered even after ->release when the right number is passed.
One way to fix it would be to put a pointer to the module into the compat ioctl hash table and increase the module count atomically from the compat code. But that would bloat the hash table a lot and I don't like it very much. Also you would either break the register_ioctl32_conversion prototype or make it a macro
and assume all calls are from the same module, which is also quite ugly.
A better solution would be to switch the few users of register_ioctl32_conversion() over to a new ->ioctl32 method in file_operations and do the conversion from there. This would avoid the race because the VFS will take care of the module count in open/release.
Michael did a patch for this some time ago for a different motivation - he had some benchmarks where the hash table lookup hurt and it was noticeable faster to use a O(1) ->ioctl32 lookup from the file_operations for his application.
An useful side effect would be also to the ability to support a per device ioctl name space. While the core kernel doesn't have much (any?) ioctls with duplicated numbers this mistake seems to be quite common in out of tree drivers and it is hard to fix without breaking compatibility.
And it would be faster for this case of course too, so even performance critical in kernel ioctls could be slowly converted to ioctl32 I wouldn't do it for all, because the current central tables work reasonably well for them and most ioctls are not speed critical anyways.
As for in kernel code it won't affect much code because near all conversion handlers in the main tree are not modular (alsa is one exception, there are a few others e.g. in some raid drivers). I expect it will be a bigger problem in the future though as ioctl emulation becomes more widespread and is done more in individual drivers.
averell:lsrc/v2.6/linux% gid register_ioctl32_conversion | wc -l 75
averell:lsrc/v2.6/linux%
In tree users are alsa, aaraid, fusion, some s390 stuff, sisfb, alsa
My proposal would be to dust off Michael's patch and convert all users in tree over to ioctl32 and then deprecate and later remove (un)register_ioctl32_conversion
Comments?
-Andi
Hello, Andi!
Quoting r. Andi Kleen ([email protected]) "unregister_ioctl32_conversion and modules. ioctl32 revisited.":
Quoted 59 lines
Hallo,
There seems to be an unfixable module unload race in the current
register_ioctl32_conversionsupport. The problem is that there is no way to wait for a conversion handler is blocked in a sleeping*_useraccess before module unloading. The module count is also not increase in this case.I previously thought it could be avoided by always putting the compat wrapper into the same module and using the reference counting that is done by VFS on ->module of the char device or file system converted. But that doesn't work because the ioctl32 lookup is independent from the file descriptor and a conversion handler can be entered even after ->release when the right number is passed.
One way to fix it would be to put a pointer to the module into the compat ioctl hash table and increase the module count atomically from the compat code. But that would bloat the hash table a lot and I don't like it very much. Also you would either break the
register_ioctl32_conversionprototype or make it a macro
and assume all calls are from the same module, which is also quite ugly.A better solution would be to switch the few users of
register_ioctl32_conversion()over to a new ->ioctl32 method infile_operationsand do the conversion from there. This would avoid the race because the VFS will take care of the module count in open/release.Michael did a patch for this some time ago for a different motivation - he had some benchmarks where the hash table lookup hurt and it was noticeable faster to use a O(1) ->ioctl32 lookup from the
file_operationsfor his application.An useful side effect would be also to the ability to support a per device ioctl name space. While the core kernel doesn't have much (any?) ioctls with duplicated numbers this mistake seems to be quite common in out of tree drivers and it is hard to fix without breaking compatibility.
And it would be faster for this case of course too, so even performance critical in kernel ioctls could be slowly converted to ioctl32 I wouldn't do it for all, because the current central tables work reasonably well for them and most ioctls are not speed critical anyways.
As for in kernel code it won't affect much code because near all conversion handlers in the main tree are not modular (alsa is one exception, there are a few others e.g. in some raid drivers). I expect it will be a bigger problem in the future though as ioctl emulation becomes more widespread and is done more in individual drivers.
averell:lsrc/v2.6/linux% gid
register_ioctl32_conversion| wc -l 75
averell:lsrc/v2.6/linux%In tree users are alsa, aaraid, fusion, some s390 stuff, sisfb, alsa
Quoted 7 lines
My proposal would be to dust off Michael's patch and convert all users in tree over to ioctl32 and then deprecate and later remove (un)register_ioctl32_conversion
Comments?
-Andi
It certainly helps performance, at least for me.
There were two additional motivations for my patch:
1. Make it possible to avoid the BKL completely by writing
an ioctl with proper internal locking.
2. As noted by Juergen Kreileder, the compat hash does not work for ioctls that encode additional information in the command, like this:
#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + ev, len)
I post the patch (updated for 2.6.10-rc2, boots) that I built for Juergen, below. If there's interest, let me know.
I'd like to add that my patch does not touch any in-kernel users, that would have to be done separately, probably as a first step simply taking the BKL inside ioctl_compat.
MST
Documentation/filesystems/Locking +9 -0
@@ -350,6 +350,10 @@ prototypes: unsigned int (*poll) (struct file *, struct poll_table_struct *); int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long); + long (*ioctl_native) (struct inode *, struct file *, unsigned int, + unsigned long); + long (*ioctl_compat) (struct inode *, struct file *, unsigned int, + unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); int (*open) (struct inode *, struct file *); int (*flush) (struct file *);
@@ -383,6 +387,8 @@ aio_write: no readdir: no poll: no ioctl: yes (see below) +ioctl_native: no (see below) +ioctl_compat: no (see below) mmap: no open: maybe (see below) flush: no
@@ -428,6 +434,9 @@ move ->readdir() to inode_operations and anything that resembles union-mount we won't have a struct file for all components. And there are other reasons why the current interface is a mess... +->ioctl() on regular files is superceded by the ->ioctl_native() and +->ioctl_compat() pair. The lock is not taken for these new calls. + ->read on directories probably must go away - we should just enforce -EISDIR in sys_read() and friends.
fs/compat.c +16 -8
@@ -401,15 +401,20 @@ asmlinkage long compat_sys_ioctl(unsigne unsigned long arg) {struct file * filp; -int error = -EBADF ; +long error = -EBADF ;struct ioctl_trans *t; +int fput_needed; - filp =fget (fd); -if (!filp) + filp =fget_light (fd, &fput_needed); +if (!filp) { goto out2; + } -if (!filp->f_op || !filp->f_op->ioctl) { - error =sys_ioctl (fd, cmd, arg); +if (!std_sys_ioctl (fd, cmd, arg, filp, &error)) { + goto out; + }else if (filp->f_op && filp->f_op->ioctl_compat) { + error = filp->f_op->ioctl_compat (filp->f_dentry->d_inode, + filp, cmd, arg); goto out; }
@@ -425,9 +430,12 @@ asmlinkage long compat_sys_ioctl(unsigne error = t->handler (fd, cmd, arg, filp);unlock_kernel ();up_read (&ioctl32_sem); - }else { + }else if (filp->f_op && filp->f_op->ioctl) {up_read (&ioctl32_sem); - error =sys_ioctl (fd, cmd, arg); +lock_kernel (); + error = filp->f_op->ioctl (filp->f_dentry->d_inode, + filp, cmd, arg); +unlock_kernel (); } }else {up_read (&ioctl32_sem);
@@ -466,7 +474,7 @@ asmlinkage long compat_sys_ioctl(unsigne } } out: -fput (filp); +fput_light (filp, fput_needed); out2:return error; }
fs/ioctl.c +47 -16
106 lines not on this page · raw message
include/linux/fs.h +17 -0
@@ -915,6 +915,23 @@ struct file_operations {int (*readdir) (struct file *,void *,filldir_t );unsigned int (*poll) (struct file *,struct poll_table_struct *);int (*ioctl) (struct inode *,struct file *,unsigned int ,unsigned long ); +/* The two calls ioctl_native and ioctl_compat described below +* can be used as a replacement for the ioctl call above. They +* take precedence over ioctl: thus if they are set, ioctl is +* not used. Unlike ioctl, BKL is not taken: drivers manage +* their own locking. */ + +/* If ioctl_native is set, it is used instead of ioctl for +* native ioctl syscalls. +* Note that the standard glibc ioctl trims the return code to +* type int, so dont try to put a 64 bit value there. +*/ +long (*ioctl_native) (struct inode *,struct file *,unsigned int ,unsigned long ); +/* If ioctl_compat is set, it is used for a 32 bit compatible +* ioctl (i.e. a 32 bit binary running on a 64 bit OS). +* Note that only the low 32 bit of the return code are passed +* to the user-space application. */ +long (*ioctl_compat) (struct inode *,struct file *,unsigned int ,unsigned long );int (*mmap) (struct file *,struct vm_area_struct *);int (*open) (struct inode *,struct file *);int (*flush) (struct file *);
include/linux/ioctl.h +8 -0
@@ -3,5 +3,13 @@#include <asm/ioctl.h> +/* Handles standard ioctl commands, and returns the result in status. +Does nothing and returns non-zero if cmd is not one of the standard commands. +*/ + +struct file ; +int std_sys_ioctl (unsigned int fd,unsigned int cmd,unsigned long arg, +struct file *filp,long *status); +#endif /* _LINUX_IOCTL_H */
Quoted 3 lines
There were two additional motivations for my patch:
1. Make it possible to avoid the BKL completely by writing an ioctl with proper internal locking.
Good point. It is the first step towards BKL less native ioctls. So it's certainly a good idea even for the non compat case.
Quoted 7 lines
2. As noted by Juergen Kreileder, the compat hash does not work for ioctls that encode additional information in the command, like this:
#define
EVIOCGBIT(ev,len)_IOC(_IOC_READ, 'E', 0x20 + ev, len)I post the patch (updated for 2.6.10-rc2, boots) that I built for Juergen, below. If there's interest, let me know.
Patch looks good to me, except for some messed up white space that is probably easily fixed.
Quoted 3 lines
I'd like to add that my patch does not touch any in-kernel users, that would have to be done separately, probably as a first step simply taking the BKL inside
ioctl_compat.
I doubt any of the compat wrappers need BKL, they never touch any global state and then just call sys_ioctl which takes the BKL only when needed.
Ok there is a slight possibility that out of tree code wrote compat wrappers that need BKL, but in that case they will just have to deal with the bugs. Removing register_ioctl32_conversion and some comments would take care of them anyways.
-Andi
Hello!
Quoting r. Andi Kleen ([email protected]) "Re: unregister_ioctl32_conversion and modules. ioctl32 revisited.":
Quoted 10 lines
Quoted 3 lines
There were two additional motivations for my patch:
1. Make it possible to avoid the BKL completely by writing an ioctl with proper internal locking.Good point. It is the first step towards BKL less native ioctls. So it's certainly a good idea even for the non compat case.
Quoted 3 lines
2. As noted by Juergen Kreileder, the compat hash does not work for ioctls that encode additional information in the command, like this:
Quoted 7 lines
Quoted 4 lines
#define
EVIOCGBIT(ev,len)_IOC(_IOC_READ, 'E', 0x20 + ev, len)I post the patch (updated for 2.6.10-rc2, boots) that I built for Juergen, below. If there's interest, let me know.
Patch looks good to me, except for some messed up white space that is probably easily fixed.
I did try so .. Where? :)
Quoted 4 lines
Quoted 3 lines
I'd like to add that my patch does not touch any in-kernel users, that would have to be done separately, probably as a first step simply taking the BKL inside
ioctl_compat.
Quoted 8 lines
I doubt any of the compat wrappers need BKL, they never touch any global state and then just call
sys_ioctlwhich takes the BKL only when needed.Ok there is a slight possibility that out of tree code wrote compat wrappers that need BKL, but in that case they will just have to deal with the bugs. Removing
register_ioctl32_conversionand some comments would take care of them anyways.
I mean out of tree code can just implement ioctl_compat by taking the BKL if it needs it.
MST
Quoted 5 lines · Michael S. Tsirkin
Quoted 5 lines
Quoted 5 lines
2. As noted by Juergen Kreileder, the compat hash does not work for ioctls that encode additional information in the command, like this:
#define
EVIOCGBIT(ev,len)_IOC(_IOC_READ, 'E', 0x20 + ev, len)
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
I post the patch (updated for 2.6.10-rc2, boots) that I built for Juergen, below. If there's interest, let me know.
Patch looks good to me, except for some messed up white space that is probably easily fixed.
I did try so .. Where? :)
Most of it actually. But perhaps your mailer just messed up the patch?
Anyways, if there are no negative comments I would recommend you submit your patch (preferably in a non messed up form) to [email protected] for inclusion into -mm*. The other parts of the proposal (converting the existing users and deprecating register_ioctl32_conversion) could be attacked then.
There is also some related work that could be done easily then, e.g. the network stack ioctls currently drop the BKL as first thing. With ioctl_native that could be probably done better. There may be other such low hanging fruit areas too.
-Andi
Hello!
Quoting r. Andi Kleen ([email protected]) "Re: unregister_ioctl32_conversion and modules. ioctl32 revisited.":
Quoted 22 lines · Michael S. Tsirkin
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
2. As noted by Juergen Kreileder, the compat hash does not work for ioctls that encode additional information in the command, like this:
#define
EVIOCGBIT(ev,len)_IOC(_IOC_READ, 'E', 0x20 + ev, len)Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
I post the patch (updated for 2.6.10-rc2, boots) that I built for Juergen, below. If there's interest, let me know.
Patch looks good to me, except for some messed up white space that is probably easily fixed.
I did try so .. Where? :)
Most of it actually. But perhaps your mailer just messed up the patch?
Anyways, if there are no negative comments I would recommend you submit your patch (preferably in a non messed up form) to [email protected] for inclusion into -mm*. The other parts of the proposal (converting the existing users and deprecating
register_ioctl32_conversion) could be attacked then.
Quoted 6 lines
There is also some related work that could be done easily then, e.g. the network stack ioctls currently drop the BKL as first thing. With
ioctl_nativethat could be probably done better. There may be other such low hanging fruit areas too.-Andi
OK, so here's a cleaned-up version, against 2.6.10-rc3. Please comment (and please Cc me, I'm not on the list).
If there are no negative comments I will try to submit to [email protected]
Andi, I'm trying again with an in-line patch, if the white-space is mangled by the mail system again, please let me know so I know to resend as an attachment.
Thanks,
MST
Documentation/filesystems/Locking +9 -0
@@ -350,6 +350,10 @@ prototypes: unsigned int (*poll) (struct file *, struct poll_table_struct *); int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long); + long (*ioctl_native) (struct inode *, struct file *, unsigned int, + unsigned long); + long (*ioctl_compat) (struct inode *, struct file *, unsigned int, + unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); int (*open) (struct inode *, struct file *); int (*flush) (struct file *);
@@ -383,6 +387,8 @@ aio_write: no readdir: no poll: no ioctl: yes (see below) +ioctl_native: no (see below) +ioctl_compat: no (see below) mmap: no open: maybe (see below) flush: no
@@ -428,6 +434,9 @@ move ->readdir() to inode_operations and anything that resembles union-mount we won't have a struct file for all components. And there are other reasons why the current interface is a mess... +->ioctl() on regular files is superceded by the ->ioctl_native() and +->ioctl_compat() pair. The lock is not taken for these new calls. + ->read on directories probably must go away - we should just enforce -EISDIR in sys_read() and friends.
include/linux/fs.h +17 -0
@@ -915,6 +915,23 @@ struct file_operations {int (*readdir) (struct file *,void *,filldir_t );unsigned int (*poll) (struct file *,struct poll_table_struct *);int (*ioctl) (struct inode *,struct file *,unsigned int ,unsigned long ); +/* The two calls ioctl_native and ioctl_compat described below +* can be used as a replacement for the ioctl call above. They +* take precedence over ioctl: thus if they are set, ioctl is +* not used. Unlike ioctl, BKL is not taken: drivers manage +* their own locking. */ + +/* If ioctl_native is set, it is used instead of ioctl for +* native ioctl syscalls. +* Note that the standard glibc ioctl trims the return code to +* type int, so dont try to put a 64 bit value there. +*/ +long (*ioctl_native) (struct inode *,struct file *,unsigned int ,unsigned long ); +/* If ioctl_compat is set, it is used for a 32 bit compatible +* ioctl (i.e. a 32 bit binary running on a 64 bit OS). +* Note that only the low 32 bit of the return code are passed +* to the user-space application. */ +long (*ioctl_compat) (struct inode *,struct file *,unsigned int ,unsigned long );int (*mmap) (struct file *,struct vm_area_struct *);int (*open) (struct inode *,struct file *);int (*flush) (struct file *);
include/linux/ioctl.h +8 -0
@@ -3,5 +3,13 @@#include <asm/ioctl.h> +/* Handles standard ioctl commands, and returns the result in status. +Does nothing and returns non-zero if cmd is not one of the standard commands. +*/ + +struct file ; +int std_sys_ioctl (unsigned int fd,unsigned int cmd,unsigned long arg, +struct file *filp,long *status); +#endif /* _LINUX_IOCTL_H */
fs/ioctl.c +47 -19
106 lines not on this page · raw message
fs/compat.c +15 -8
@@ -401,15 +401,19 @@ asmlinkage long compat_sys_ioctl(unsigne unsigned long arg) {struct file * filp; -int error = -EBADF ; +long error = -EBADF ;struct ioctl_trans *t; +int fput_needed; - filp =fget (fd); -if (!filp) + filp =fget_light (fd, &fput_needed); +if (!filp) goto out2; -if (!filp->f_op || !filp->f_op->ioctl) { - error =sys_ioctl (fd, cmd, arg); +if (!std_sys_ioctl (fd, cmd, arg, filp, &error)) + goto out; +else if (filp->f_op && filp->f_op->ioctl_compat) { + error = filp->f_op->ioctl_compat (filp->f_dentry->d_inode, + filp, cmd, arg); goto out; }
@@ -425,9 +429,12 @@ asmlinkage long compat_sys_ioctl(unsigne error = t->handler (fd, cmd, arg, filp);unlock_kernel ();up_read (&ioctl32_sem); - }else { + }else if (filp->f_op && filp->f_op->ioctl) {up_read (&ioctl32_sem); - error =sys_ioctl (fd, cmd, arg); +lock_kernel (); + error = filp->f_op->ioctl (filp->f_dentry->d_inode, + filp, cmd, arg); +unlock_kernel (); } }else {up_read (&ioctl32_sem);
@@ -466,7 +473,7 @@ asmlinkage long compat_sys_ioctl(unsigne } } out: -fput (filp); +fput_light (filp, fput_needed); out2:return error; }
Quoted 5 lines · Michael S. Tsirkin
+ /* The two calls
ioctl_nativeandioctl_compatdescribed below + * can be used as a replacement for the ioctl call above. They + * take precedence over ioctl: thus if they are set, ioctl is + * not used. Unlike ioctl, BKL is not taken: drivers manage + * their own locking. */
I don't really understand how this should deal with drivers that have both generic and private ioctl conversion handlers. E.g. drivers/s390/block/dasd*.c want to go through the handlers in fs/compat_ioctl.c for stuff like BLKGETSIZE, while it also allows third party modules to dynamically register additional ioctls. See drivers/s390/block/dasd_cmb.c for an example, I think EMC are doing something similar to support their drives.
If the dasd driver now implements an ioctl_compat() method, who will call the standard conversion handlers?
Arnd <><
Quoted 10 lines
I don't really understand how this should deal with drivers that have both generic and private ioctl conversion handlers. E.g.
drivers/s390/block/dasd*.cwant to go through the handlers infs/compat_ioctl.cfor stuff like BLKGETSIZE, while it also allows third party modules to dynamically register additional ioctls. Seedrivers/s390/block/dasd_cmb.cfor an example, I think EMC are doing something similar to support their drives.If the dasd driver now implements an
ioctl_compat()method, who will call the standard conversion handlers?
How about just calling back to a special function from these special ioctl handlers?
-Andi
Quoted 7 lines · Andi Kleen
Quoted 3 lines
If the dasd driver now implements an
ioctl_compat()method, who will call the standard conversion handlers?How about just calling back to a special function from these special ioctl handlers?
Sorry, I don't understand. AFAICS, if the driver does not have a ioctl_compat() file op, it will only be called for those ioctl numbers that are registered in fs/compat_ioctl.c, but not for the ones that were added by a third party module.
If it has a ioctl_compat() function, it can handle its own ioctls including those that are dynamically added, but not any generic ones that have static conversion functions in fs/compat_ioctl.c. Do you mean it should call back from its private ioctl_compat() function to the global ioctl32_hash_table[] lookup?
Arnd <><
Quoted 3 lines
Do you mean it should call back
from its privateioctl_compat()function to the global ioctl32_hash_table[] lookup?
Yes.
Some ioctl paths already work this way, e.g. in the block layer.
-Andi
Quoted 7 lines · Andi Kleen
Quoted 3 lines
Do you mean it should call back
from its privateioctl_compat()function to the global ioctl32_hash_table[] lookup?Yes.
Some ioctl paths already work this way, e.g. in the block layer.
Hmm. I just had another idea. Maybe it's easier to return -ENOIOCTLCMD from ->ioctl_compat() in order to get back to the hash lookup. How about the change below?
Arnd <><
fs/compat.c +0 -0
@@ somewhere in compat_sys_ioctl() @@else if (filp->f_op && filp->f_op->ioctl_compat) { error = filp->f_op->ioctl_compat (filp->f_dentry->d_inode, filp, cmd, arg); - goto out; +if (error != -ENOIOCTLCMD ) + goto out; }
Quoted 3 lines
Hmm. I just had another idea. Maybe it's easier to return
-ENOIOCTLCMDfrom ->ioctl_compat() in order to get back to the hash lookup. How about the change below?
Looks good too to me.
-Andi
Quoted 16 lines
Arnd <><fs/compat.c +0
-0@@ somewhere in
compat_sys_ioctl()@@else if (filp->f_op && filp->f_op->ioctl_compat) { error = filp->f_op->ioctl_compat(filp->f_dentry->d_inode, filp, cmd, arg);fs/compat.c +2
-1- goto out; +if (error != -ENOIOCTLCMD ) + goto out; }
Hello!
Quoting r. Arnd Bergmann ([email protected]) "Re: unregister_ioctl32_conversion and modules. ioctl32 revisited.":
Quoted 24 lines · Andi Kleen
Quoted 2 lines
Quoted 2 lines
Do you mean it should call back
from its privateioctl_compat()function to the globalioctl32_hash_table[]
Quoted 5 lines
Quoted 1 line
lookup?
Yes.
Some ioctl paths already work this way, e.g. in the block layer.
Hmm. I just had another idea. Maybe it's easier to return
-ENOIOCTLCMDfrom ->ioctl_compat() in order to get back to the hash lookup. How about the change below?Arnd <><fs/compat.c +0
-0@@ somewhere in
compat_sys_ioctl()@@else if (filp->f_op && filp->f_op->ioctl_compat) { error = filp->f_op->ioctl_compat(filp->f_dentry->d_inode, filp, cmd, arg);
fs/compat.c
Quoted 4 lines
fs/compat.c +2
-1- goto out; +if (error != -ENOIOCTLCMD ) + goto out; }
But what if you really wanted to return -ENOIOCTLCMD? And, the idea was to get rid of the hash eventually?
MST
Quoted 1 line
But what if you really wanted to return
-ENOIOCTLCMD?
It's an internal error code as Arnd pointed out.
Quoted 1 line
And, the idea was to get rid of the hash eventually?
Just rid of the dynamic hash changes. I don't have any plans to convert all the static ioctls in fs/compat_ioctl.c (that would be a lot of work without clear gain)
-Andi
Quoted 3 lines · Andi Kleen
Quoted 1 line
But what if you really wanted to return
-ENOIOCTLCMD?It's an internal error code as Arnd pointed out.
can we be sure this will never escape to userspace? i can think of somewhere else we already do this (EFSCORRUPTED) and it does (somewhat deliberately escape to userspace) and this causes confusion from time to time when applications see 'errno == 990'
Quoted 6 lines · Chris Wedgwood
Quoted 1 line
It's an internal error code as Arnd pointed out.
can we be sure this will never escape to userspace? i can think of somewhere else we already do this (EFSCORRUPTED) and it does (somewhat deliberately escape to userspace) and this causes confusion from time to time when applications see 'errno == 990'
It's safe for the compat ioctl case. If someone wants to use the same function for the compat and native handler, it would be a bug to return -ENOIOCTLCMD from that handler with the current code.
To work around this, we could either convert -ENOIOCTLCMD to -EINVAL when returning from sys_ioctl(). Or we could WARN_ON(err == -ENOIOCTLCMD) for the native path in order to make the intention clear.
Arnd <><
Re: [discuss] Re: unregister_ioctl32_conversion and modules. ioct l32 revisited.
Hello!
Quoting r. Arnd Bergmann ([email protected]) "Re: [discuss] Re: unregister_ioctl32_conversion and modules. ioct l32 revisited.":
Quoted 8 lines · Chris Wedgwood
Quoted 6 lines
Quoted 1 line
It's an internal error code as Arnd pointed out.
can we be sure this will never escape to userspace? i can think of somewhere else we already do this (EFSCORRUPTED) and it does (somewhat deliberately escape to userspace) and this causes confusion from time to time when applications see 'errno == 990'
Quoted 6 lines
It's safe for the compat ioctl case. If someone wants to use the same function for the compat and native handler, it would be a bug to return
-ENOIOCTLCMDfrom that handler with the current code.To work around this, we could either convert
-ENOIOCTLCMDto-EINVALwhen returning fromsys_ioctl().
That would be -ENOTTY, I think.
Quoted 5 lines
Or we could WARN_ON(err ==
-ENOIOCTLCMD)
for the native path in order to make the intention clear.Arnd <><
Re: [discuss] Re: unregister_ioctl32_conversion and modules. ioct l32 revisited.
In reply to Arnd BergmannHello!
Quoting r. Arnd Bergmann ([email protected]) "Re: [discuss] Re: unregister_ioctl32_conversion and modules. ioct l32 revisited.":
Quoted 12 lines · Chris Wedgwood
Quoted 6 lines
Quoted 1 line
It's an internal error code as Arnd pointed out.
can we be sure this will never escape to userspace? i can think of somewhere else we already do this (EFSCORRUPTED) and it does (somewhat deliberately escape to userspace) and this causes confusion from time to time when applications see 'errno == 990'
It's safe for the compat ioctl case. If someone wants to use the same function for the compat and native handler, it would be a bug to return
-ENOIOCTLCMDfrom that handler with the current code.
Quoted 6 lines
To work around this, we could either convert
-ENOIOCTLCMDto-EINVALwhen returning fromsys_ioctl(). Or we couldWARN_ON(err == -ENOIOCTLCMD)
for the native path in order to make the intention clear.Arnd <><
You mean like this?
fs/ioctl.c 2005-01-05 21:14:09.341195424 +0200 renamed from fs/ioctl.c.ok 2005-01-05 21:13:46.165718632 +0200 +1 -1
@@ -162,7 +162,7 @@ asmlinkage long sys_ioctl(unsigned int f out: fput_light(filp, fput_needed); out2: - return error; + return error==-ENOIOCTLCMD?-ENOTTY:error; } /*
fs/compat.c 2005-01-05 21:16:04.922624376 +0200 renamed from fs/compat.c.ok 2005-01-05 21:15:34.221291688 +0200 +1 -1
@@ -476,7 +476,7 @@ asmlinkage long compat_sys_ioctl(unsigne out: fput_light(filp, fput_needed); out2: - return error; + return error==-ENOIOCTLCMD?-ENOTTY:error; } static int get_compat_flock(struct flock *kfl, struct compat_flock __user *ufl)
Re: [discuss] Re: unregister_ioctl32_conversion and modules. ioct l32 revisited.
Quoted 1 line · Michael S. Tsirkin
You mean like this?
Yes, except that
Quoted 11 lines
Signed-off-by Michael S. Tsirkin <[email protected]>fs/ioctl.c 2005-01-05 21:14:09.341195424 +0200 renamed from fs/ioctl.c.ok 2005-01-05 21:13:46.165718632 +0200 +0
-0@@ -162,7 +162,7 @@ asmlinkage long sys_ioctl(unsigned int fout:
fput_light(filp, fput_needed);
out2:
- return error;
+ return error==-ENOIOCTLCMD?-ENOTTY:error;
}
Quoted 1 line
/*
- Spacing is broken.
- I think the convention would be to use EINVAL here. ENOTTY mean 'this device does not support ioctl', while EINVAL is used for 'ioctl is supported, but not this number'.
- I would put the conversion only in the place that calls ->native_ioctl in order to make clearer why it is done.
Quoted 11 lines
fs/compat.c 2005-01-05 21:16:04.922624376 +0200 renamed from fs/compat.c.ok 2005-01-05 21:15:34.221291688 +0200 +0
-0@@ -476,7 +476,7 @@ asmlinkage long compat_sys_ioctl(unsigneout:
fput_light(filp, fput_needed);
out2:
- return error;
+ return error==-ENOIOCTLCMD?-ENOTTY:error;
}static int
get_compat_flock(struct flock *kfl, struct compat_flock __user *ufl)
I don't think it's needed for the compat case, as we are already handling ENOIOCTLCMD here by doing to hash lookup.
I'd also prefer the code to be based on Christophs version, which unfortunately is lacking handling for ENOIOCTLCMD from compat_ioctl, but otherwise looks better.
Arnd <><
At Wed, 15 Dec 2004 09:46:35 +0200,
Quoted 8 lines · Michael S. Tsirkin
There were two additional motivations for my patch:
1. Make it possible to avoid the BKL completely by writing
an ioctl with proper internal locking.
2. As noted by Juergen Kreileder, the compat hash does not work for ioctls that encode additional information in the command, like this:#define
EVIOCGBIT(ev,len)_IOC(_IOC_READ, 'E', 0x20 + ev, len)
I like the idea very well. Other benifits in addition:
3. Can avoid conflict of ioctls with the same value since the convertor is registered locally.
4. Can reject unsupported ioctls for the device (but may be valid for other devices) before converting the data - the same reason as above.
--
Takashi Iwai <[email protected]> ALSA Developer - www.alsa-project.org
Quoted 9 lines · Takashi Iwai
At Wed, 15 Dec 2004 09:46:35 +0200,
Quoted 7 lines · Michael S. Tsirkin
There were two additional motivations for my patch:
1. Make it possible to avoid the BKL completely by writing
an ioctl with proper internal locking.
2. As noted by Juergen Kreileder, the compat hash does not work for ioctls that encode additional information in the command, like this:
Quoted 4 lines
Quoted 1 line
#define
EVIOCGBIT(ev,len)_IOC(_IOC_READ, 'E', 0x20 + ev, len)I like the idea very well. Other benifits in addition:
How does this all relate to Ingo's ->unlocked_ioctl stuff which is "an official way to do BKL-less ioctls"?
http://lkml.org/lkml/2004/12/14/53
Lee
Hello!
Quoting r. Lee Revell ([email protected]) "Re: unregister_ioctl32_conversion and modules. ioctl32 revisited.":
Quoted 14 lines · Takashi Iwai
Quoted 12 lines
At Wed, 15 Dec 2004 09:46:35 +0200,
Quoted 8 lines · Michael S. Tsirkin
There were two additional motivations for my patch:
1. Make it possible to avoid the BKL completely by writing
an ioctl with proper internal locking.
2. As noted by Juergen Kreileder, the compat hash does not work for ioctls that encode additional information in the command, like this:#define
EVIOCGBIT(ev,len)_IOC(_IOC_READ, 'E', 0x20 + ev, len)> >I like the idea very well. Other benifits in addition:
Quoted 6 lines
How does this all relate to Ingo's ->unlocked_ioctl stuff which is "an official way to do BKL-less ioctls"?
http://lkml.org/lkml/2004/12/14/53
Lee
It conflicts :) When I wrote the original patch for 2.6.8.1 I didnt see the unlocked_ioctl.patch.
unlocked_ioctl is the same as ioctl_native in my patch, except that
1. I added more documentation in several places :) (notably Documentation/filesystems/Locking)
2. I thought it a bit silly to name a function for what it does not do (does not take a lock), and we still need a call for the compat layer.
My patch adds another call to enable special handling for 32 bit ioctls on 64 bit systems.
I could look at porting to -rc3-mm1, unless
we dont want to back unlocked_ioctl.patch off.
What do people here think?
MST
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
Quoted 10 lines · Lee Revell
Quoted 9 lines · Takashi Iwai
At Wed, 15 Dec 2004 09:46:35 +0200,
Quoted 7 lines · Michael S. Tsirkin
There were two additional motivations for my patch:
1. Make it possible to avoid the BKL completely by writing
an ioctl with proper internal locking.
2. As noted by Juergen Kreileder, the compat hash does not work for ioctls that encode additional information in the command, like this:
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
#define
EVIOCGBIT(ev,len)_IOC(_IOC_READ, 'E', 0x20 + ev, len)I like the idea very well. Other benifits in addition:
How does this all relate to Ingo's ->unlocked_ioctl stuff which is "an official way to do BKL-less ioctls"?
This is another "official" way which is more powerful. I suppose it will replace Ingo's patch.
-Andi
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
Quoted 5 lines · Andi Kleen
Quoted 2 lines
How does this all relate to Ingo's ->unlocked_ioctl stuff which is "an official way to do BKL-less ioctls"?
This is another "official" way which is more powerful. I suppose it will replace Ingo's patch.
the ALSA changes are mine but i'm otherwise building ontop of the following patch in -rc3-mm1:
whichever approach gets adopted upstream, the various actors ought to synchronize a bit more - this is the third approach so far in a very short interval to get rid of the BKL in ioctls :-)
Ingo
Quoted 9 lines · Ingo Molnar
Quoted 5 lines · Andi Kleen
Quoted 2 lines
How does this all relate to Ingo's ->unlocked_ioctl stuff which is "an official way to do BKL-less ioctls"?
This is another "official" way which is more powerful. I suppose it will replace Ingo's patch.
Quoted 8 lines
the ALSA changes are mine but i'm otherwise building ontop of the following patch in -rc3-mm1:
whichever approach gets adopted upstream, the various actors ought to synchronize a bit more - this is the third approach so far in a very short interval to get rid of the BKL in ioctls :-)
I think Michael's patch is best (but I'm probably biased) because it addresses the independent problem of a race in unregister_ioctl32_conversion() too (and some other smaller issues in ioctl 32bit emulation)
Andrew, could we replace unlocked_ioctl.patch with Michael's patch? Adapting depending code should be very easy, since only the name of the function vector has changed.
-Andi
Quoted 4 lines · Andi Kleen
I think Michael's patch is best (but I'm probably biased) because it addresses
the independent problem of a race inunregister_ioctl32_conversion()too (and some other smaller issues in ioctl 32bit emulation)
They should be separate patches.
Quoted 1 line
Andrew, could we replace unlocked_ioctl.patch with Michael's patch?
Where would one locate Michael's patch?
Hello!
Quoting r. Andrew Morton ([email protected]) "Re: [discuss] Re: unregister_ioctl32_conversion and modules. ioctl32 revisited.":
Quoted 11 lines
Quoted 4 lines · Andi Kleen
I think Michael's patch is best (but I'm probably biased) because it addresses
the independent problem of a race inunregister_ioctl32_conversion()too (and some other smaller issues in ioctl 32bit emulation)They should be separate patches.
Quoted 1 line
Andrew, could we replace unlocked_ioctl.patch with Michael's patch?
Where would one locate Michael's patch?
Here it is for review (against 2.6.10-rc3) http://lkml.org/lkml/2004/12/15/62
I plan to incorporate Arnd Bergmann's comments and repost later today.
MST
Quoted 7 lines · Andrew Morton
Quoted 4 lines · Andi Kleen
I think Michael's patch is best (but I'm probably biased) because it addresses
the independent problem of a race inunregister_ioctl32_conversion()too (and some other smaller issues in ioctl 32bit emulation)They should be separate patches.
The two new methods (ioctl_native and ioctl_compat) are in the same patch because they basically touch the same piece of code and would be hard to separate. The other stuff (actually replacing register_ioctl32_conversion and converting a few obvious users to use the BKL less fast path) will be addon patches.
Quoted 4 lines
Quoted 2 lines
Andrew, could we replace unlocked_ioctl.patch with Michael's patch?
Where would one locate Michael's patch?
See his mail.
-Andi
PATCH 1/1 unregister_ioctl32_conversion and modules. ioctl32 revisited.
In reply to Andi KleenHello, Andrew!
Since I didnt get any negative comments on this (and some positive) Andi Kleen suggested I submit the following patch to you. It boots fine for me, please consider for mainline inclusion.
Dependencies:
The patch below is against 2.6.10-rc3. Please note it replaces Ingo's ->unlocked_ioctl patch from rc3-mm1, so you have to back that off before applying mine to mm:
Please mail me directly with comments since I'm not on the list.
Changes from the last version I posted ( http://lkml.org/lkml/2004/12/15/62 )
- Two whitespace cleanups. I hope its all good now.
- Arnd Bergmann's idea: make it possible to go back from ioctl_compat to hash lookup (good for static ioctl tables) by returning -ENOIOCTLCMD from ioctl_compat
- Petr Vandrovec's idea: add HAVE_... macros to make it easier for out-of-kernel modules to detect the new file_operations.
Description:
The patch introduces two new methods (ioctl_native and ioctl_compat):ioctl_native is called on native ioctl syscall, without BKL being taken, and is, in that respect, equivalent to Ingo's unlocked_ioctl (which is why it conflicts).ioctl_compat is called on compat (i.e. 32 bit app on 64 bit OS) ioctl, again without BKL being taken.
If a new call is not defined, default to the old behaviour.
(It should be possible for me to build a patch that applies on top of Ingo's unlocked_ioctl, if its really needed let me know and I'll look at it the next week.)
Motivation: Quoting Andi Kleen:
Quoted 8 lines
Hallo,
There seems to be an unfixable module unload race in the current
register_ioctl32_conversionsupport. The problem is that there is no way to wait for a conversion handler is blocked in a sleeping*_useraccess before module unloading. The module count is also not increase in this case.
...
[Snip]
Quoted 33 lines
A better solution would be to switch the few users of
register_ioctl32_conversion()over to a new ->ioctl32 method infile_operationsand do the conversion from there. This would avoid the race because the VFS will take care of the module count in open/release.Michael did a patch for this some time ago for a different motivation - he had some benchmarks where the hash table lookup hurt and it was noticeable faster to use a O(1) ->ioctl32 lookup from the
file_operationsfor his application.An useful side effect would be also to the ability to support a per device ioctl name space. While the core kernel doesn't have much (any?) ioctls with duplicated numbers this mistake seems to be quite common in out of tree drivers and it is hard to fix without breaking compatibility.
And it would be faster for this case of course too, so even performance critical in kernel ioctls could be slowly converted to ioctl32 I wouldn't do it for all, because the current central tables work reasonably well for them and most ioctls are not speed critical anyways.
As for in kernel code it won't affect much code because near all conversion handlers in the main tree are not modular (alsa is one exception, there are a few others e.g. in some raid drivers). I expect it will be a bigger problem in the future though as ioctl emulation becomes more widespread and is done more in individual drivers.
averell:lsrc/v2.6/linux% gid
register_ioctl32_conversion| wc -l 75
averell:lsrc/v2.6/linux%
Quoted 5 lines
In tree users are alsa, aaraid, fusion, some s390 stuff, sisfb, alsa
My proposal would be to dust off Michael's patch and convert all users in tree over to ioctl32 and then deprecate and later remove (un)register_ioctl32_conversion
There was an additional motivation for my patch:
As noted by Juergen Kreileder, the compat hash does not work for ioctls that encode additional information in the command, like this:
#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + ev, len)
Comments?
Thanks,
MST
Documentation/filesystems/Locking +9 -0
@@ -350,6 +350,10 @@ prototypes: unsigned int (*poll) (struct file *, struct poll_table_struct *); int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long); + long (*ioctl_native) (struct inode *, struct file *, unsigned int, + unsigned long); + long (*ioctl_compat) (struct inode *, struct file *, unsigned int, + unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); int (*open) (struct inode *, struct file *); int (*flush) (struct file *);
@@ -383,6 +387,8 @@ aio_write: no readdir: no poll: no ioctl: yes (see below) +ioctl_native: no (see below) +ioctl_compat: no (see below) mmap: no open: maybe (see below) flush: no
@@ -428,6 +434,9 @@ move ->readdir() to inode_operations and anything that resembles union-mount we won't have a struct file for all components. And there are other reasons why the current interface is a mess... +->ioctl() on regular files is superceded by the ->ioctl_native() and +->ioctl_compat() pair. The lock is not taken for these new calls. + ->read on directories probably must go away - we should just enforce -EISDIR in sys_read() and friends.
include/linux/fs.h +24 -0
@@ -900,6 +900,12 @@ typedef struct {typedef int (*read_actor_t )(read_descriptor_t *,struct page *,unsigned long ,unsigned long ); +/* These macros are for out of kernel modules to test that +* the kernel supports the ioctl_native and ioctl_compat +* fields in struct file_operations. */ +#define HAVE_IOCTL_COMPAT 1 +#define HAVE_IOCTL_NATIVE 1 +/* * NOTE: * read, write, poll, fsync, readv, writev can be called
@@ -915,6 +921,24 @@ struct file_operations {int (*readdir) (struct file *,void *,filldir_t );unsigned int (*poll) (struct file *,struct poll_table_struct *);int (*ioctl) (struct inode *,struct file *,unsigned int ,unsigned long ); +/* The two calls ioctl_native and ioctl_compat described below +* can be used as a replacement for the ioctl call above. They +* take precedence over ioctl: thus if they are set, ioctl is +* not used. Unlike ioctl, BKL is not taken: drivers manage +* their own locking. */ + +/* If ioctl_native is set, it is used instead of ioctl for +* native ioctl syscalls. +* Note that the standard glibc ioctl trims the return code to +* type int, so dont try to put a 64 bit value there. +*/ +long (*ioctl_native) (struct inode *,struct file *,unsigned int ,unsigned long ); +/* If ioctl_compat is set, it is used for a 32 bit compatible +* ioctl (i.e. a 32 bit binary running on a 64 bit OS). +* Return -ENOIOCTLCMD if you dont handle it. +* Note that only the low 32 bit of the return code are passed +* to the user-space application. */ +long (*ioctl_compat) (struct inode *,struct file *,unsigned int ,unsigned long );int (*mmap) (struct file *,struct vm_area_struct *);int (*open) (struct inode *,struct file *);int (*flush) (struct file *);
include/linux/ioctl.h +8 -0
@@ -3,5 +3,13 @@#include <asm/ioctl.h> +/* Handles standard ioctl commands, and returns the result in status. +Does nothing and returns non-zero if cmd is not one of the standard commands. +*/ + +struct file ; +int std_sys_ioctl (unsigned int fd,unsigned int cmd,unsigned long arg, +struct file *filp,long *status); +#endif /* _LINUX_IOCTL_H */
fs/ioctl.c +48 -20
107 lines not on this page · raw message
fs/compat.c +16 -8
@@ -401,16 +401,21 @@ asmlinkage long compat_sys_ioctl(unsigne unsigned long arg) {struct file * filp; -int error = -EBADF ; +long error = -EBADF ;struct ioctl_trans *t; +int fput_needed; - filp =fget (fd); -if (!filp) + filp =fget_light (fd, &fput_needed); +if (!filp) goto out2; -if (!filp->f_op || !filp->f_op->ioctl) { - error =sys_ioctl (fd, cmd, arg); +if (!std_sys_ioctl (fd, cmd, arg, filp, &error)) goto out; +else if (filp->f_op && filp->f_op->ioctl_compat) { + error = filp->f_op->ioctl_compat (filp->f_dentry->d_inode, + filp, cmd, arg); +if (error != -ENOIOCTLCMD ) + goto out; }down_read (&ioctl32_sem);
@@ -425,9 +430,12 @@ asmlinkage long compat_sys_ioctl(unsigne error = t->handler (fd, cmd, arg, filp);unlock_kernel ();up_read (&ioctl32_sem); - }else { + }else if (filp->f_op && filp->f_op->ioctl) {up_read (&ioctl32_sem); - error =sys_ioctl (fd, cmd, arg); +lock_kernel (); + error = filp->f_op->ioctl (filp->f_dentry->d_inode, + filp, cmd, arg); +unlock_kernel (); } }else {up_read (&ioctl32_sem);
@@ -466,7 +474,7 @@ asmlinkage long compat_sys_ioctl(unsigne } } out: -fput (filp); +fput_light (filp, fput_needed); out2:return error; }
Documentation/filesystems/Locking prototypes: · line 356
Quoted 4 lines
Documentation/filesystems/Locking +4
-0+ long (*ioctl_native) (struct inode *, struct file *, unsigned int, + unsigned long); + long (*ioctl_compat) (struct inode *, struct file *, unsigned int, + unsigned long);
Please remove the struct inode * argument, it's easily retrievable from file->f_dentry->d_inode. The ioctl prototype is a leftover from really old days where that wasn't true.
2.6.10-mm1
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10-mm1
- Added new bk-kconfig tree from Sam
- The bk-usb tree has been dropped due to a tendency to oops.
- Lots of stuff.
Changes since 2.6.10-rc3-mm1:
linus.patch
bk-acpi.patch
bk-alsa.patch
bk-cifs.patch
bk-cpufreq.patch
bk-i2c.patch
bk-ide-dev.patch
bk-input.patch
bk-dtor-input.patch
bk-jfs.patch
bk-kbuild.patch
bk-kconfig.patch
bk-mtd.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-scsi.patch
External bk trees
-ppc64-make-up-kernel-run-on-power4-logical-partition.patch -direct-io-set-PF_SYNCWRITE.patch
-msync-set-PF_SYNCWRITE.patch -reduce-ext3-log-spamming-blank-lines.patch -do_task_stat-use-pid_alive.patch
-fix-ext2-ext3-memory-leak.patch
-uml-ramdisk-config-fix.patch
-shmctl-shm_lock-perms.patch
-vmlib-wrapped-executable-brk.patch -vmlib-wrapped-mprotect-flags.patch -ppc64-workaround-pci-issue-on-g5.patch -ppc64-pseries-shared-processor-fixes.patch -highmemc-fix-bio-error-propagation.patch -documentation-for-ia64-serial-device-name-changes.patch -add-missing-__kernel__-or-other-protections.patch
-scsi-imm-fix.patch
-gcc4-fixes.patch
-include-asm-x86_64-pgtableh-pgd_offset_gate.patch -swsusp-bugfixes-do-not-oops-when-not-enough-memory-during-resume.patch -swsusp-bugfixes-fix-memory-leak.patch -swsusp-fixes-fix-confusing-printk.patch
-swsusp-fix-header-typo.patch
-swsusp-fix-types.patch -ppc64-make-sure-lppaca-doesnt-cross-page-boundary.patch -arcnet-fixes.patch -x25-when-receiving-a-call-check-listening-sockets-for-matching-call-user-data.patch -x25-remove-unused-header-files.patch -net-socketc__sock_create-cleanup.patch -remove-netfilter-warnings-on-copy_to_user.patch -small-drivers-atm-cleanups.patch -ppc64-fix-signal-mask-on-delivery-error.patch -ppc64-sigmasking-fix.patch
-xen-vmm-4-alloc_skb_from_cache.patch
-sis-drm-bool-bitfields.patch -allocate-sysfs_dirent-structures-from-their-own-slab.patch -parenthesize-init_wait.patch -fix-concurrent-access-to-dev-urandom.patch -ide-cd-unable-to-read-multisession-dvds.patch -fix-bogus-echild-return-from-wait-with-zombie-group-leader.patch -code-to-register-amba-serial-console-is-missing.patch -selinux-adds-a-private-inode-operation.patch -reiserfs-private-inode-abstracted-to-static-inline.patch -reiserfs-fixes-to-allow-reiserfs-to-use-selinux-attributes.patch -reiserfs-cleaning-up-const-checks.patch
-selinux-hooks-cleanup.patch
-dvb-saa7146-driver-misc-updates.patch
-dvb-b2c2-driver-splitup.patch
-dvb-update-dib-usb-driver.patch
-dvb-dvb-core-update.patch
-dvb-frontend-update.patch
-dvb-av7110-driver-update.patch
-documentation-mem=.patch
-rocket-documentation-changes.patch -remove-speedstep_coppermine-docs.patch -final-polish-on-disk-ioctl-documentation.patch -scsi-qla2xxx-qla_rscnc-remove-unused-functions-fwd.patch
Merged
+vmscan-total_scanned-fix.patch
Fix kswapd CPU utilisation problem
-iounmap-fix.patch
-pageattr-fix.patch
-pageattr-flush-tlb-fix.patch
-pageattr-guard-page.patch
These were conflicting with other patches
-4level-core-patch.patch
-4level-bogus-bug_on.patch -4level-fix-vmalloc-overflow.patch -4level-core-tweaks.patch
-4level-highpte-fix.patch -4level-architecture-changes-for-alpha.patch -4level-architecture-changes-for-arm.patch -4level-fixes-arm.patch -4level-architecture-changes-for-cris.patch -4level-convert-drm-to-4levels.patch -4level-add-asm-generic-support-for-emulating.patch -4level-make-3level-fallback-more-type-safe.patch -4level-ia64-support.patch -4level-ia64-support-fix.patch -pml4-ia64-build-fix.patch -4level-architecture-changes-for-i386.patch -4level-architecture-changes-for-i386-fix.patch -4level-architecture-changes-for-m32r.patch -4level-architecture-changes-for-ppc.patch -4level-architecture-changes-for-ppc64.patch -4level-architecture-changes-for-s390.patch -4level-architecture-changes-for-s390-fix.patch -4level-architecture-changes-for-sh.patch -4level-architecture-changes-for-sh64.patch -4level-architecture-changes-for-sparc.patch -4level-architecture-changes-for-sparc64.patch -4level-architecture-changes-for-x86_64.patch -4level-architecture-changes-for-x86_64-pml4_offset_gate-fix.patch -uml-pml4-support.patch -uml-config_highmem-atomicity-fix.patch
Andi and Nick's 4-level-pagetable implementation was merged.
+ide-dev-build-fix.patch
Fix build error in bk-ide-dev.patch
+bk-kbuild-in_gate_area_no_task-warning-fix.patch
Fix build error in bk-kbuild.patch
-numa-policies-for-file-mappings-mpol_mf_move.patch
Dropped due to patch clashes. Is being redone.
+slab-add-more-arch-overrides-to-control-object-alignment.patch
Allow architecture to override slab minimum alignment.
+collect-page_states-only-from-online-cpus.patch +collect-page_states-only-from-online-cpus-tidy.patch
get_page_state() SMP speedup.
+alloc_large_system_hash-numa-interleaving.patch
+filesystem-hashes-numa-interleaving.patch
+tcp-hashes-numa-interleaving.patch
Spread the large hashtables across NUMA nodes
-page-fault-scalability-patch-v11-ia64-atomic-pte-operations.patch -page-fault-scalability-patch-v11-universal-cmpxchg-for-i386.patch -page-fault-scalability-patch-v11-i386-atomic-pte-operations.patch -page-fault-scalability-patch-v11-x86_64-atomic-pte-operations.patch -page-fault-scalability-patch-v11-s390-atomic-pte-operations.patch
These were causing patch clashes and aren't a lot of use on their own.
+xircom_tulip_cb-build-fix-warning-fix.patch
Fix xircom_cb warning
+netfilter-fix-return-values-of-ipt_recent-checkentry.patch +netfilter-fix-ip_conntrack_proto_sctp-exit-on-sysctl.patch +netfilter-fix-ip_ct_selective_cleanup-and-rename.patch +netfilter-add-comment-above-remove_expectations-in.patch +netfilter-remove-ipchains-and-ipfwadm-compatibility.patch +netfilter-remove-copy_to_user-warnings-in-netfilter.patch +netfilter-fix-cleanup-in-ipt_recent-should-ipt_registrater_match-error.patch +fix-broken-rst-handling-in-ip_conntrack.patch
netfilter fixes
+ppc32-add-uimage-to-default-targets.patch +ppc32-fix-io_remap_page_range-for-36-bit-phys-platforms.patch +ppc32-resurrect-documentation-powerpc-cpu_featurestxt.patch
ppc32 udpates
-remove-unnecessary-inclusions-of-asm-aouth.patch
This broke the build.
+gp-rel-data-support-vs-bk-kbuild-fix.patch
Fix gp-rel-data-support.patch versus bk-kbuild.
+frv-debugging-fixes.patch
+frv-minix-ext2-bitops-fixes.patch
+frv-perfctr_info-syscall.patch
+frv-update-the-trap-tables-comment.patch
+frv-accidental-tlb-entry-write-protect-fix.patch
+frv-pagetable-handling-fixes.patch
+frv-fr55x-cpu-support-fixes.patch
FRV arch updates
+implement-nommu-find_vma.patch +fix-nommu-map_shared-handling.patch +permit-nommu-map_shared-of-memory-backed-files.patch +cross-reference-nommu-vmas-with-mappings.patch
nommu fixes
+trivial-cleanup-in-arch-i386-kernel-heads.patch
+remove-pfn_to_pgdat-on-x86.patch
+boot_ap_for_nondefault_kernel.patch
+i386-boot-loader-ids.patch
+proc-sys-kernel-bootloader_type.patch
x86 updates
-x86_64-cleanups-preparing-for-memory-hotplug.patch
THis broke and is being redone
+xen-vmm-4-return-code-for-arch_free_page-fix.patch
Fix xen-vmm-4-return-code-for-arch_free_page.patch
+arm26-remove-arm32-cruft.patch +arm26-update-the-atomic-ops.patch +arm26-build-system-updates.patch +arm26-update-comments-headers-notes.patch +arm26-necessary-compilation-fixes-for-2610.patch +arm26cleanup-trap-handling-assembly.patch +arm26-new-execve-code.patch +arm26-move-some-files-to-better-locations.patch +arm26-remove-shark-arm32-from-arm26.patch +arm26-softirq-update.patch +arm26-update-systemh-to-some-semblance-of-recentness.patch +arm26-replace-arm32-time-handling-code-with-smaller-version.patch +arm26-tlb-update.patch +arm26-better-put_user-macros.patch +arm26-better-unistdh-reimplemented-based-on-arm32.patch
arm26 architecture update
+fix-naming-in-swsusp.patch +swsusp-kill-unused-variable.patch +swsusp-kill-one-line-helpers-handle-read-errors.patch +swsusp-small-cleanups.patch +swsusp-kill-on2-algorithm-in-swsusp.patch +swsusp-try_to_freeze-to-make-freezing-hooks-nicer.patch +swsusp-try_to_freeze-to-make-freezing-hooks-nicer-fix.patch
swsusp update
+m32r-add-new-relocation-types-to-elfh.patch
+m32r-support-pgprot_noncached.patch
+m32r-update-ptracec-for-multithread.patch
+m32r-fix-not-to-execute-noexec-pages-0-3.patch
+m32r-cause-sigsegv-for-nonexec-page.patch
+m32r-dont-encode-ace_instruction-in.patch
+m32r-clean-up-arch-m32r-mm-faultc-3-3.patch
+m32r-clean-up-include-asm-m32r-pgtableh.patch
+m32r-support-page_none-1-3.patch
+m32r-remove-page_user-2-3.patch
+m32r-clean-up.patch
+m32r-include-asm-m32r-thread_infoh-minor.patch
+m32r-use-kmalloc-for-m32r-stacks-2-2.patch
+m32r-make-kernel-headers-for-mutual.patch
+m32r-use-generic-hardirq-framework.patch
+m32r-update-include-asm-m32r-systemh.patch
+m32r-update-include-asm-m32r-mmu_contexth.patch
m32r update
-uml-fix-__pgd_alloc-declaration.patch
Not needed any more
+s390-core-patches.patch
+s390-common-i-o-layer.patch
+s390-network-device-driver-patches.patch
+s390-dasd-driver.patch
+s390-character-device-drivers.patch
+s390-dcss-driver-cleanup-fix.patch
+s390-sclp-device-driver-cleanup.patch
S/390 update
-rcu-eliminate-rcu_datalast_qsctr.patch
+rcu-make-two-internal-structs-static.patch
+rcu-simplify-quiescent-state-detection.patch
rcu cleanups
-ioctl-cleanup.patch
-unlocked_ioctl.patch
+ioctl-rework.patch
New version of the dont-hold-BKL-across-ioctl patch.
+remove-rcu-abuse-in-cpu_idle-warning-fix.patch
RCU cleanup
+udf-simplify-udf_iget-fix-race.patch
+udf-fix-reservation-discarding.patch
UDF fixes
+remove-dead-ext3_put_inode-prototype.patch
ext3 cleanup
+compat-sigtimedwait.patch
+compat-sigtimedwait-sparc64-fix.patch
+compat-sigtimedwait-ppc64-fix.patch
compat signal fixes
+prio_tree-roll-call-to-prio_tree_first-into-prio_tree_next.patch +prio_tree-generalization.patch +prio_tree-move-general-code-from-mm-to-lib.patch
priority tree generalisation
+lcd-fix-memory-leak-code-cleanup.patch
Fix this char driver
+initramfs-unprivileged-image-creation.patch
initramfs permissions fix
+fix-conflicting-cpu_idle-declarations.patch
cleanup and fix up cpu_idle() declarations
+removes-redundant-sys_delete_module.patch
Remove unneeded function.
+task_structexit_state-usage.patch
Fix the handling of task_struct.state bits.
+trivial-uninline-kill-__exit_mm.patch
Code cleanup
+pcmcia-rename-pcmcia-devices.patch
+pcmcia-pd6729-e-mail-update.patch
+pcmcia-pd6729-cleanups.patch
+pcmcia-pd6729-isa_irq-handling.patch
+pcmcia-remove-obsolete-code.patch
+pcmcia-remove-pending_events.patch
+pcmcia-remove-client_attributes.patch +pcmcia-remove-unneeded-parameter-from-rsrc_mgr.patch +pcmcia-remove-dev_info-from-client.patch +pcmcia-remove-mtd-and-bulkmem-replaced-by-pcmciamtd.patch +pcmcia-per-socket-resource-database.patch +pcmcia-validate_mem-only-for-non-statically-mapped-sockets.patch +pcmcia-adjust_io_region-only-for-non-statically-mapped-sockets.patch +pcmcia-find_io_region-only-for-non-statically-mapped-sockets.patch +pcmcia-find_mem_region-only-for-non-statically-mapped-sockets.patch +pcmcia-adjust_-and-release_resources-only-for-non-statically-mapped-sockets.patch +pcmcia-move-resource-handling-code-only-for-non-statically-mapped-sockets-to-other-file.patch +pcmcia-make-rsrc_nonstatic-an-independend-module.patch +pcmcia-allocate-resource-database-per-socket.patch +pcmcia-remove-typedef.patch
+pcmcia-grab-lock-in-resource_release.patch
pcmcia update
+knfsd-move-nfserr_openmode-checking-from-nfsd_read-write-into-nfs4_preprocess_stateid_op-in-preperation-for-delegation-state.patch +knfsd-check-the-callback-netid-in-gen_callback.patch
+knfsd-count-the-nfs4_client-structure-usage.patch +knfsd-preparation-for-delegation-client-callback-probe.patch +knfsd-preparation-for-delegation-client-callback-probe-warning-fixes.patch +knfsd-probe-the-callback-path-upon-a-successful-setclientid_confirm.patch +knfsd-check-for-existence-of-file_lock-parameter-inside-of-the-kernel-lock.patch +knfsd-get-rid-of-the-special-delegation_stateid_t-use-the-existing-stateid_t.patch +knfsd-add-structures-for-delegation-support.patch +knfsd-allocate-and-initialize-the-delegation-structure.patch +knfsd-find-a-delegation-for-a-file-given-a-stateid.patch +knfsd-add-the-delegation-release-and-free-functions.patch
+knfsd-changes-to-expire_client.patch
+knfsd-delay-nfsd_colse-for-delegations-until-reaping.patch
+knfsd-delegation-recall-callback-rpc.patch
+knfsd-kernel-thread-for-delegation-callback.patch +knfsd-helper-functions-for-deciding-to-grant-a-delegation.patch
+knfsd-attempt-to-hand-out-a-delegation.patch
+knfsd-remove-unnecessary-stateowner-existence-check.patch +knfsd-check-for-openmode-violations-given-a-delegation-stateid.patch +knfsd-add-checking-of-delegation-stateids-to-nfs4_preprocess_stateid_op.patch +knfsd-add-the-delegreturn-operation.patch
+knfsd-add-to-the-laundromat-service-for-delegations.patch +knfsd-clear-the-recall_lru-of-delegations-at-shutdown.patch
knfsd update
+export-sched_setscheduler-for-kernel-module-use.patch
Allow modules to set kernel thread scheduling policy
+sched-fix-scheduling-latencies-in-mttrc-reenables-interrupts.patch
Fix sched-fix-scheduling-latencies-in-mttrc.patch
+replace-numnodes-with-node_online_map-alpha.patch +replace-numnodes-with-node_online_map-arm.patch +replace-numnodes-with-node_online_map-i386.patch +replace-numnodes-with-node_online_map-ia64.patch +replace-numnodes-with-node_online_map-m32r.patch +replace-numnodes-with-node_online_map-mips.patch +replace-numnodes-with-node_online_map-parisc.patch +replace-numnodes-with-node_online_map-ppc64.patch +replace-numnodes-with-node_online_map-x86_64.patch +replace-numnodes-with-node_online_map.patch
Clean up and fix numa node ID handling
-remove-rcu-abuse-in-cpu_idle-warning-fix.patch
Not needed
+ppc64-fix-cpu-hotplug.patch
Fix i386-cpu-hotplug-updated-for-mm.patch for ppc64
reiser4-export-inode_lock.patch reiser4-export-pagevec-funcs.patch reiser4-export-radix_tree_preload.patch
+reiser4-export-find_get_pages.patch
reiser4-radix-tree-tag.patch reiser4-radix_tree_lookup_slot.patch
-reiser4-aliased-dir.patch -reiser4-kobject-umount-race.patch -reiser4-kobject-umount-race-cleanup.patch +#reiser4-aliased-dir.patch +#reiser4-kobject-umount-race.patch +#reiser4-kobject-umount-race-cleanup.patch
reiser4-perthread-pages.patch reiser4-unstatic-kswapd.patch reiser4-include-reiser4.patch
reiser4-doc.patch
reiser4-only.patch
-reiser4-page_cache_readahead-fix.patch -reiser4-fix-a-use-after-free-bug-in-reiser4_parse_options.patch -reiser4-missing-context-creation-is-added.patch -reiser4-crypto-update.patch -reiser4-max_cbk_iteration-fix.patch -reiser4-reduce-stack-usage.patch -reiser4-fix-deadlock.patch -reiser4-dont-use-shrink_dcache_anon.patch -reiser4-kmap-atomic-fixes.patch +reiser4-recover-read-performance.patch +reiser4-export-find_get_pages_tag.patch +reiser4-add-missing-context.patch
New reiser4 code drop
+fix-rom-enable-disable-in-r128-and-radeon-fb-drivers.patch +fbdev-cleanup-i2c-code-of-rivafb.patch +fbdev-revive-bios-less-booting-for-rage-xl-cards.patch +fbdev-revive-global_mode_option.patch +fbcon-fbdev-add-blanking-notification.patch +fbcon-fbdev-add-blanking-notification-fix.patch +fbdev-check-return-value-of-fb_add_videomode.patch +fbdev-do-a-symbol_put-for-each-symbol_get-in-savagefb.patch +fbdev-add-viewsonic-pf775a-to-broken-display-database.patch +fbdev-fix-default-timings-in-vga16fb.patch +fbdev-reduce-stack-usage-of-intelfb.patch +zr36067-driver-correct-jpeg-app-com-markers.patch +zr36067-driver-ppc-be-port.patch +zr36067-driver-reduce-stack-size-usage.patch
fbdev updates
+moxa-update-status-of-moxa-smartio-driver.patch +moxa-remove-ancient-changelog-readmemoxa.patch +moxa-remove-readmemoxa-from-documentation-00-index.patch +specialix-remove-bouncing-e-mail-address.patch +stallion-update-to-documentation-stalliontxt.patch +riscom8-update-staus-and-documentation-of-driver.patch +pm-remove-outdated-docs.patch +docs-add-sparse-howto.patch +cciss-documentation-update.patch +cciss-correct-mailing-list-address-in-source-code.patch +cpqarray-correct-mailing-list-address-in-source-code.patch +sh-remove-x86-specific-help-in-kconfig.patch +cyclades-put-readmecycladez-in-documentation-serial.patch +tipar-document-driver-options.patch +tipar-code-cleanup.patch
Various documentaiton updates and char driver cleanups
+binfmt_scriptc-make-em86_format-static.patch +remove-unused-include-asm-m68k-adb_mouseh.patch +scsi-aic7xxx-remove-two-useless-variables.patch +remove-in_string_c.patch +remove-ct_to_secs-ct_to_usecs.patch +bttv-driverc-make-some-variables-static.patch +arch-alpha-kconfig-kill-stale-reference-to-documentation-smptex.patch +init-initramfsc-make-unpack_to_rootfs-static.patch +oss-misc-cleanups.patch +inux-269-fs-proc-basec-array-size.patch +linux-269-fs-proc-proc_ttyc-avoid-array.patch +signalc-convert-assertion-to-bug_on.patch +right-severity-level-for-fatal-message.patch +remove-unused-drivers-char-rio-cdprotoh.patch +remove-unused-drivers-char-rsf16fmih.patch +mtd-added-nec-upd29f064115-support.patch
Various code cleanups
+optimize-prefetch-usage-in-list_for_each_xxx.patch
speed up list_for_each()
+waiting-10s-before-mounting-root-filesystem.patch
Retry the mount of the root filesytem during bootup.
number of patches in -mm: 896
number of changesets in external trees: 453
number of patches in -mm only: 879
total patches: 1332
All 896 patches:
linus.patch
expose-reiserfs_sync_fs.patch
Expose reiserfs_sync_fs()
fix-reiserfs-quota-debug-messages.patch
Fix reiserfs quota debug messages
fix-of-quota-deadlock-on-pagelock-quota-core.patch
Fix of quota deadlock on pagelock: quota core
vfs_quota_off-oops-fix.patch
vfs_quota_off-oops-fix
quota-umount-race-fix.patch
quota umount race fix
fix-of-quota-deadlock-on-pagelock-ext2.patch
Fix of quota deadlock on pagelock: ext2
fix-of-quota-deadlock-on-pagelock-ext2-tweaks.patch
fix-of-quota-deadlock-on-pagelock-ext2-tweaks
fix-of-quota-deadlock-on-pagelock-ext3.patch
Fix of quota deadlock on pagelock: ext3
fix-of-quota-deadlock-on-pagelock-ext3-tweaks.patch
fix-of-quota-deadlock-on-pagelock-ext3-tweaks
fix-of-quota-deadlock-on-pagelock-reiserfs.patch
Fix of quota deadlock on pagelock: reiserfs
fix-of-quota-deadlock-on-pagelock-reiserfs-fix.patch
fix-of-quota-deadlock-on-pagelock-reiserfs-fix
reiserfs-bug-fix-do-not-clear-ms_active-mount-flag.patch
reiserfs bug fix: do not clear MS_ACTIVE mount flag
allow-disabling-quota-messages-to-console.patch
Allow disabling quota messages to console
vmscan-total_scanned-fix.patch
vmscan: total_scanned fix
cs461x-gameport-code-isnt-being-included-in-build.patch
CS461x gameport code isn't being included in build
bk-acpi.patch
acpi-report-errors-in-fanc.patch
ACPI: report errors in fan.c
acpi-flush-tlb-when-pagetable-changed.patch
acpi: flush TLB when pagetable changed
bk-alsa.patch
bk-cifs.patch
bk-cpufreq.patch
bk-i2c.patch
bk-ide-dev.patch
ide-dev-build-fix.patch
ide-dev-build-fix
bk-input.patch
bk-dtor-input.patch
bk-jfs.patch
bk-kbuild.patch
bk-kbuild-in_gate_area_no_task-warning-fix.patch
bk-kbuild-in_gate_area_no_task-warning-fix
bk-kconfig.patch
bk-mtd.patch
bk-netdev.patch
via-rhine-warning-fix.patch
via-rhine warning fix
hostap-fix-kconfig-typos-and-missing-select-crypto.patch
hostap: fix Kconfig typos and missing select CRYPTO
ixgb-lr-card-support.patch
ixgb LR card support
bk-ntfs.patch
bk-pci.patch
bk-scsi.patch
mm.patch
add -mmN to EXTRAVERSION
fix-smm-failures-on-e750x-systems.patch
fix SMM failures on E750x systems
mm-keep-count-of-free-areas.patch
mm: keep count of free areas
mm-higher-order-watermarks.patch
mm: higher order watermarks
mm-higher-order-watermarks-fix.patch
higher order watermarks fix
mm-teach-kswapd-about-higher-order-areas.patch
mm: teach kswapd about higher order areas
simplified-readahead.patch
Simplified readahead
simplified-readahead-fix.patch
Simplified readahead fix
simplified-readahead-cleanups.patch
simplified-readahead-cleanups
readahead-congestion-control.patch
Simplified readahead
make-tree_lock-an-rwlock.patch
make mapping->tree_lock an rwlock
mempolicy-optimization.patch
mempolicy optimisation
mm-overcommit-updates.patch
mm: overcommit updates
kill-off-highmem_start_page.patch
kill off highmem_start_page
make-sure-ioremap-only-tests-valid-addresses.patch
make sure ioremap only tests valid addresses
mark_page_accessed-for-reads-on-non-page-boundaries.patch
mark_page_accessed() for read()s on non-page boundaries
do_anonymous_page-use-setpagereferenced.patch
do_anonymous_page() use SetPageReferenced
slab-add-more-arch-overrides-to-control-object-alignment.patch
slab: Add more arch overrides to control object alignment
collect-page_states-only-from-online-cpus.patch
collect page_states only from online cpus
collect-page_states-only-from-online-cpus-tidy.patch
collect-page_states-only-from-online-cpus-tidy
alloc_large_system_hash-numa-interleaving.patch
alloc_large_system_hash: NUMA interleaving
filesystem-hashes-numa-interleaving.patch
filesystem hashes: NUMA interleaving
tcp-hashes-numa-interleaving.patch
TCP hashes: NUMA interleaving
must-fix.patch
must fix lists update
must fix list update
mustfix update
must-fix update
mustfix lists
xircom_tulip_cb-build-fix.patch
xircom_tulip_cb.c build fix
xircom_tulip_cb-build-fix-warning-fix.patch
xircom_tulip_cb-build-fix warning fix
net-netconsole-poll-support-for-3c509.patch
net: Netconsole poll support for 3c509
pcnet32-79c976-with-fiber-optic.patch
pcnet32: 79c976 with fiber optic fix
multicast-filtering-for-tunc.patch
Multicast filtering for tun.c
r8169-missing-netif_poll_enable-and-irq-ack.patch
r8169: missing netif_poll_enable and irq ack
r8169-c-101.patch
r8169: C 101
r8169-large-send-enablement.patch
r8169: Large Send enablement
r8169-reduce-max-mtu-for-large-frames.patch
r8169: reduce max MTU for large frames
r8169-oversized-driver-field-for-ethtool.patch
r8169: oversized driver field for ethtool
fix-ibm_emac-autonegotiation-result-parsing.patch
EMAC: fix ibm_emac autonegotiation result parsing
netfilter-fix-return-values-of-ipt_recent-checkentry.patch
netfilter: fix return values of ipt_recent checkentry
netfilter-fix-ip_conntrack_proto_sctp-exit-on-sysctl.patch
netfilter: Fix ip_conntrack_proto_sctp exit on sysctl fail
netfilter-fix-ip_ct_selective_cleanup-and-rename.patch
netfilter: Fix ip_ct_selective_cleanup(), and rename ip_ct_iterate_cleanup()
netfilter-add-comment-above-remove_expectations-in.patch
netfilter: Add comment above remove_expectations in destroy_conntrack()
netfilter-remove-ipchains-and-ipfwadm-compatibility.patch
netfilter: Remove IPCHAINS and IPFWADM compatibility
netfilter-remove-copy_to_user-warnings-in-netfilter.patch
netfilter: Remove copy_to_user Warnings in Netfilter
netfilter-fix-cleanup-in-ipt_recent-should-ipt_registrater_match-error.patch
netfilter: Fix cleanup in ipt_recent should ipt_registrater_match error
fix-broken-rst-handling-in-ip_conntrack.patch
Fix broken RST handling in ip_conntrack
ppc32-freescale-book-e-mmu-cleanup.patch
ppc32: freescale Book-E MMU cleanup
ppc32-refactor-common-book-e-exception-code.patch
ppc32: refactor common book-e exception code
ppc32-switch-to-kbuild_defconfig.patch
ppc32: Switch to KBUILD_DEFCONFIG
ppc32-marvell-host-bridge-support-mv64x60.patch
ppc32: Marvell host bridge support (mv64x60)
ppc32-marvell-host-bridge-support-mv64x60-review-fixes.patch
ppc32-marvell-host-bridge-support-mv64x60 review fixes
ppc32-support-for-marvell-ev-64260-bp-eval-platform.patch
ppc32: support for Marvell EV-64260[ab]-BP eval platform
ppc32-support-for-force-cpci-690-board.patch
ppc32: support for Force CPCI-690 board
ppc32-support-for-artesyn-katana-cpci-boards.patch
ppc32: support for Artesyn Katana cPCI boards
ppc32-add-support-for-ibm-750fx-and-750gx-eval-boards.patch
ppc32: add Support for IBM 750FX and 750GX Eval Boards
ppc32-ppc4xx-pic-rewrite-cleanup.patch
ppc32: PPC4xx PIC rewrite/cleanup
ppc32-performance-monitor-oprofile-support-for-e500.patch
ppc32: performance Monitor/Oprofile support for e500
ppc32-performance-monitor-oprofile-support-for-e500-review-fixes.patch
Fix prototypes & externs in e500 oprofile support
ppc32-fix-ebonyc-warnings.patch
ppc32: fix ebony.c warnings
ppc32-remove-bogus-sprn_cpc0_gpio-define.patch
ppc32: remove bogus SPRN_CPC0_GPIO define
ppc32-debug-setcontext-syscall-implementation.patch
PPC debug setcontext syscall implementation.
ppc32-add-uimage-to-default-targets.patch
ppc32: add uImage to default targets
ppc32-fix-io_remap_page_range-for-36-bit-phys-platforms.patch
ppc32: fix io_remap_page_range for 36-bit phys platforms
ppc32-resurrect-documentation-powerpc-cpu_featurestxt.patch
ppc32: Resurrect Documentation/powerpc/cpu_features.txt
ppc64-kprobes-implementation.patch
ppc64: kprobes implementation
ppc64-tweaks-to-cpu-sysfs-information.patch
ppc64: tweaks to ppc64 cpu sysfs information
ppc64-reloc_hide.patch
kprobes-wrapper-to-define-jprobeentry.patch
Kprobes: wrapper to define jprobe.entry
termio-userspace-access-error-handling.patch
Termio userspace access error handling
ide_arch_obsolete_init-fix.patch
IDE_ARCH_OBSOLETE_INIT fix
out-of-line-implementation-of-find_next_bit.patch
out-of-line implementation of find_next_bit()
gp-rel-data-support.patch
GP-REL data support
gp-rel-data-support-vs-bk-kbuild-fix.patch
gp-rel-data-support-vs-bk-kbuild-fix
vm-routine-fixes.patch
VM routine fixes
vm-routine-fixes-CONFIG_SHMEM-fix.patch
vm-routine-fixes CONFIG_SHMEM fix
frv-fujitsu-fr-v-cpu-arch-maintainer-record.patch
FRV: Fujitsu FR-V CPU arch maintainer record
frv-fujitsu-fr-v-arch-documentation.patch
FRV: Fujitsu FR-V arch documentation
frv-fujitsu-fr-v-cpu-arch-implementation-part-1.patch
FRV: Fujitsu FR-V CPU arch implementation part 1
frv-fujitsu-fr-v-cpu-arch-implementation-part-2.patch
FRV: Fujitsu FR-V CPU arch implementation part 2
frv-fujitsu-fr-v-cpu-arch-implementation-part-3.patch
FRV: Fujitsu FR-V CPU arch implementation part 3
frv-fujitsu-fr-v-cpu-arch-implementation-part-4.patch
FRV: Fujitsu FR-V CPU arch implementation part 4
frv-fujitsu-fr-v-cpu-arch-implementation-part-5.patch
FRV: Fujitsu FR-V CPU arch implementation part 5
frv-fujitsu-fr-v-cpu-arch-implementation-part-6.patch
FRV: Fujitsu FR-V CPU arch implementation part 6
frv-fujitsu-fr-v-cpu-arch-implementation-part-7.patch
FRV: Fujitsu FR-V CPU arch implementation part 7
frv-fujitsu-fr-v-cpu-arch-implementation-part-8.patch
FRV: Fujitsu FR-V CPU arch implementation part 8
frv-fujitsu-fr-v-cpu-arch-implementation-part-9.patch
FRV: Fujitsu FR-V CPU arch implementation part 9
put-memory-in-dma-zone-not-normal-zone-in-frv-arch.patch
Put memory in DMA zone not Normal zone in FRV arch
frv-kill-off-highmem_start_page.patch
kill off highmem_start_page
frv-first-batch-of-fujitsu-fr-v-arch-include-files.patch
FRV: First batch of Fujitsu FR-V arch include files
frv-remove-obsolete-hardirq-stuff-from-includes.patch
frv: emove obsolete hardirq stuff from includes
frv-pci-dma-fixes.patch
frv: PCI DMA fixes
fix-frv-pci-config-space-write.patch
frv: Fix PCI config space write
frv-more-fujitsu-fr-v-arch-include-files.patch
FRV: More Fujitsu FR-V arch include files
convert-frv-to-use-remap_pfn_range.patch
convert FRV to use remap_pfn_range
frv-yet-more-fujitsu-fr-v-arch-include-files.patch
FRV: Yet more Fujitsu FR-V arch include files
frv-remaining-fujitsu-fr-v-arch-include-files.patch
FRV: Remaining Fujitsu FR-V arch include files
frv-make-calibrate_delay-optional.patch
FRV: Make calibrate_delay() optional
frv-better-mmap-support-in-uclinux.patch
FRV: Better mmap support in uClinux
frv-procfs-changes-for-nommu-changes.patch
FRV: procfs changes for nommu changes
frv-change-setup_arg_pages-to-take-stack-pointer.patch
FRV: change setup_arg_pages() to take stack pointer
frv-change-setup_arg_pages-to-take-stack-pointer-fixes.patch
Fix usage of setup_arg_pages() in IA64, MIPS, S390 and Sparc64
frv-add-fdpic-elf-binary-format-driver.patch
FRV: Add FDPIC ELF binary format driver
fix-some-elf-fdpic-binfmt-problems.patch
Fix some ELF-FDPIC binfmt problems
further-nommu-changes.patch
Further nommu changes
further-nommu-proc-changes.patch
Further nommu /proc changes
frv-arch-nommu-changes.patch
frv: nommu changes
make-more-syscalls-available-for-the-fr-v-arch.patch
Make more syscalls available for the FR-V arch
frv-debugging-fixes.patch
FRV: debugging fixes
frv-minix-ext2-bitops-fixes.patch
frv: Minix & ext2 bitops fixes
frv-perfctr_info-syscall.patch
frv: perfctr_info syscall
frv-update-the-trap-tables-comment.patch
frv: update the trap tables comment
frv-accidental-tlb-entry-write-protect-fix.patch
frv: accidental TLB entry write-protect fix
frv-pagetable-handling-fixes.patch
FRV: pagetable handling fixes
frv-fr55x-cpu-support-fixes.patch
FRV: FR55x CPU support fixes
implement-nommu-find_vma.patch
Implement nommu find_vma()
fix-nommu-map_shared-handling.patch
Fix nommu MAP_SHARED handling
permit-nommu-map_shared-of-memory-backed-files.patch
Permit nommu MAP_SHARED of memory backed files
cross-reference-nommu-vmas-with-mappings.patch
Cross-reference nommu VMAs with mappings
superhyway-bus-support.patch
SuperHyway bus support
assign-pkmap_base-dynamically.patch
Assign PKMAP_BASE dynamically
x86-remove-data-header-and-code-overlap-in-boot-setups.patch
x86: remove data-header and code overlap in boot/setup.S
cyrix-mii-cpuid-returns-stale-%ecx.patch
Cyrix MII cpuid returns stale %ecx
nx-fix-noexec-kernel-parameter.patch
NX: Fix noexec kernel parameter
nx-triple-fault-with-4k-kernel-mappings-and-pae.patch
NX: Triple fault with 4k kernel mappings and PAE
trivial-cleanup-in-arch-i386-kernel-heads.patch
Trivial cleanup in arch/i386/kernel/head.S
remove-pfn_to_pgdat-on-x86.patch
remove pfn_to_pgdat() on x86
boot_ap_for_nondefault_kernel.patch
Secondary cpus boot-up for non defalut location built kernels
i386-boot-loader-ids.patch
i386 boot loader IDs
proc-sys-kernel-bootloader_type.patch
/proc/sys/kernel/bootloader_type
intel-thermal-monitor-for-x86_64.patch
Intel thermal monitor for x86_64
x86_64-do_general_protection-retval-check.patch
x86_64: do_general_protection() retval check
x86_64-add-a-real-pfn_valid.patch
x86_64: Add a real pfn_valid
x86_64-fix-bugs-in-the-amd-k8-cmp-support-code.patch
x86_64: Fix bugs in the AMD K8 CMP support code.
x86_64-fix-bugs-in-the-amd-k8-cmp-support-code-fix.patch
x86_64: numa_add_cpu() fix
x86_64-reenable-mga-dri-on-x86-64.patch
x86_64: Reenable MGA DRI on x86-64
x86_64-remove-duplicated-fake_stack_frame-macro.patch
x86_64: Remove duplicated FAKE_STACK_FRAME macro.
x86_64-remove-bios-reboot-code.patch
x86_64: Remove BIOS reboot code
x86_64-add-reboot=force.patch
x86_64: Add reboot=force
x86_64-collected-ioremap-fixes.patch
x86_64: Collected ioremap fixes
x86_64-handle-nx-correctly-in-pageattr.patch
x86_64: Handle NX correctly in pageattr
x86_64-split-acpi-boot-table-parsing.patch
x86_64: Split ACPI boot table parsing
x86_64-split-acpi-boot-table-parsing-fix.patch
x86_64-split-acpi-boot-table-parsing-fix
x86_64-add-srat-numa-discovery-to-x86-64.patch
x86_64: Add SRAT NUMA discovery to x86-64.
x86_64-update-uptime-after-suspend.patch
x86_64: Update uptime after suspend
x86_64-allow-a-kernel-debugger-to-hide-single-steps-in.patch
x86_64: Allow a kernel debugger to hide single steps in more cases.
x86_64-remove-debug-information-for-vsyscalls.patch
x86_64: Remove debug information for vsyscalls
x86_64-rename-htvalid-to-cmp_legacy.patch
x86_64: Rename HTVALID to CMP_LEGACY
x86_64-scheduler-support-for-amd-cmp.patch
x86_64: Scheduler support for AMD CMP
x86_64-add-a-missing-__iomem-pointed-out-by-linus.patch
x86_64: Add a missing __iomem pointed out by Linus.
x86_64-add-a-missing-newline-in-proc-cpuinfo.patch
x86_64: Add a missing newline in /proc/cpuinfo
x86_64-always-print-segfaults-for-init.patch
x86_64: Always print segfaults for init.
x86_64-export-phys_proc_id.patch
x86_64: Export phys_proc_id
x86_64-allow-to-configure-more-cpus-and-nodes.patch
x86_64: Allow to configure more CPUs and nodes.
x86_64-allow-to-configure-more-cpus-and-nodes-fix.patch
x86_64-allow-to-configure-more-cpus-and-nodes fix
x86_64-fix-a-warning-in-the-cmp-support-code-for.patch
x86_64: Fix a warning in the CMP support code for !CONFIG_NUMA
x86_64-fix-some-outdated-assumptions-that-cpu-numbers.patch
x86_64: Fix some outdated assumptions that CPU numbers are equal numbers.
x86_64-fix-em64t-config-description.patch
x86_64: Fix EM64T config description
x86_64-remove-unneeded-ifdef-in-hardirqh.patch
x86_64: Remove unneeded ifdef in hardirq.h
x86_64-add-slit-inter-node-distance-information-to.patch
x86_64: Add SLIT (inter node distance) information to sysfs.
x86_64-add-x86_64-support-for-jack-steiners-slit-sysfs.patch
x86_64: Add x86_64 support for Jack Steiner's SLIT sysfs patch
x86_64-eliminate-some-useless-printks-in-acpi-numac.patch
x86_64: Eliminate some useless printks in ACPI numa.c
xen-vmm-4-add-ptep_establish_new-to-make-va-available.patch
Xen VMM #4: add ptep_establish_new to make va available
xen-vmm-4-return-code-for-arch_free_page.patch
Xen VMM #4: return code for arch_free_page
xen-vmm-4-return-code-for-arch_free_page-fix.patch
Get rid of arch_free_page() warning
xen-vmm-4-runtime-disable-of-vt-console.patch
Xen VMM #4: runtime disable of VT console
xen-vmm-4-has_arch_dev_mem.patch
Xen VMM #4: HAS_ARCH_DEV_MEM
xen-vmm-4-split-free_irq-into-teardown_irq.patch
Xen VMM #4: split free_irq into teardown_irq
h8-300-new-systemcall-support.patch
H8/300 new systemcall support
arm26-remove-arm32-cruft.patch
arm26: remove arm32 cruft
arm26-update-the-atomic-ops.patch
arm26: update the atomic ops
arm26-build-system-updates.patch
arm26 build system updates
arm26-update-comments-headers-notes.patch
arm26: update comments, headers, notes
arm26-necessary-compilation-fixes-for-2610.patch
arm26: necessary compilation fixes for 2.6.10
arm26cleanup-trap-handling-assembly.patch
arm26:cleanup trap handling assembly
arm26-new-execve-code.patch
arm26: new execve code
arm26-move-some-files-to-better-locations.patch
arm26: move some files to better locations
arm26-remove-shark-arm32-from-arm26.patch
arm26: remove shark (arm32) from arm26
arm26-softirq-update.patch
arm26: softirq update
arm26-update-systemh-to-some-semblance-of-recentness.patch
arm26: update system.h to some semblance of recentness.
arm26-replace-arm32-time-handling-code-with-smaller-version.patch
arm26: replace arm32 time handling code with smaller version
arm26-tlb-update.patch
arm26: TLB update
arm26-better-put_user-macros.patch
arm26: better put_user macros.
arm26-better-unistdh-reimplemented-based-on-arm32.patch
arm26: better unistd.h (reimplemented based on arm32)
ia64-remove-hcdp-support-for-early-printk.patch
ia64: remove HCDP support for early printk
typeofdev-powersaved_state.patch
typeof(dev->power.saved_state)
fix-naming-in-swsusp.patch
fix naming in swsusp
swsusp-kill-unused-variable.patch
swsusp: kill unused variable
swsusp-kill-one-line-helpers-handle-read-errors.patch
swsusp: kill one-line helpers, handle read errors
swsusp-small-cleanups.patch
From: Pavel Machek <[email protected]>
Subject: swsusp: Small cleanups
swsusp-kill-on2-algorithm-in-swsusp.patch
swsusp: Kill O(n^2) algorithm in swsusp
swsusp-try_to_freeze-to-make-freezing-hooks-nicer.patch
swsusp: try_to_freeze to make freezing hooks nicer
swsusp-try_to_freeze-to-make-freezing-hooks-nicer-fix.patch
swsusp-try_to_freeze-to-make-freezing-hooks-nicer fix
m32r-add-new-relocation-types-to-elfh.patch
m32r: Add new relocation types to elf.h
m32r-support-pgprot_noncached.patch
m32r: Support pgprot_noncached()
m32r-update-ptracec-for-multithread.patch
m32r: Update ptrace.c for multithread debugging
m32r-fix-not-to-execute-noexec-pages-0-3.patch
Subject: [PATCH 2.6.10-rc3-mm1] m32r: Fix not to execute noexec pages (0/3)
m32r-cause-sigsegv-for-nonexec-page.patch
Subject: [PATCH 2.6.10-rc3-mm1] m32r: Cause SIGSEGV for nonexec page execution (1/3)
m32r-dont-encode-ace_instruction-in.patch
Subject: [PATCH 2.6.10-rc3-mm1] m32r: Don't encode ACE_INSTRUCTION in address (2/3)
m32r-clean-up-arch-m32r-mm-faultc-3-3.patch
Subject: [PATCH 2.6.10-rc3-mm1] m32r: Clean up arch/m32r/mm/fault.c (3/3)
m32r-clean-up-include-asm-m32r-pgtableh.patch
Subject: [PATCH 2.6.10-rc3-mm1] m32r: Clean up include/asm-m32r/pgtable.h
m32r-support-page_none-1-3.patch
m32r: Support PAGE_NONE
m32r-remove-page_user-2-3.patch
m32r: Remove PAGE_USER
m32r-clean-up.patch
m32r: Clean up include/asm-m32r/pgtable-2level.h
m32r-include-asm-m32r-thread_infoh-minor.patch
m32r: include/asm-m32r/thread_info.h minor updates
m32r-use-kmalloc-for-m32r-stacks-2-2.patch
m32r: Use kmalloc for m32r stacks
m32r-make-kernel-headers-for-mutual.patch
m32r: Make kernel headers for mutual exclusion
m32r-use-generic-hardirq-framework.patch
m32r: Use generic hardirq framework
m32r-update-include-asm-m32r-systemh.patch
m32r: Update include/asm-m32r/system.h
m32r-update-include-asm-m32r-mmu_contexth.patch
m32r: Update include/asm-m32r/mmu_context.h
uml-remove-most-devfs_mk_symlink-calls.patch
uml: remove most devfs_mk_symlink calls
uml-fix-__wrap_free-comment.patch
uml: fix __wrap_free comment
uml-fix-some-ptrace-functions-returns-values.patch
uml: fix some ptrace functions returns values
uml-redo-the-signal-delivery-mechanism.patch
uml: redo the signal delivery mechanism
uml-make-restorer-match-i386.patch
uml: make restorer match i386
uml-unistdh-cleanup.patch
uml: unistd.h cleanup
uml-remove-a-quilt-induced-duplicity.patch
uml: remove a quilt-induced duplicity
uml-fix-sigreturn-to-not-copy_user-under-a-spinlock.patch
uml: fix sigreturn to not copy_user under a spinlock
uml-close-host-file-descriptors-properly.patch
uml: close host file descriptors properly
uml-free-host-resources-associated-with-freed-irqs.patch
uml: free host resources associated with freed IRQs
uml-unregister-signal-handlers-at-reboot.patch
uml: unregister signal handlers at reboot
hostfs-uml-set-sendfile-to-generic_file_sendfile.patch
hostfs: uml: set .sendfile to generic_file_sendfile
hostfs-uml-add-some-other-pagecache-methods.patch
hostfs: uml: add some other pagecache methods
uml-terminal-cleanup.patch
uml: terminal cleanup
uml-first-part-rework-of-run_helper-and-users.patch
Uml: first part rework of run_helper() and users.
uml-finish-fixing-run_helper-failure-path.patch
uml: finish fixing run_helper failure path
uml-add-elf-vsyscall-support.patch
uml: add elf vsyscall support
uml-make-vsyscall-page-into-process-page-tables.patch
uml: make vsyscall page into process page tables
uml-include-vsyscall-page-in-core-dumps.patch
uml: include vsyscall page in core dumps
uml-add-tracesysgood-support.patch
uml: Add TRACESYSGOOD support
uml-kill-host-processes-properly.patch
uml: kill host processes properly
uml-defconfig-update.patch
uml: defconfig update
uml-small-vsyscall-fixes.patch
uml: small vsyscall fixes
uml-export-end_iomem.patch
uml: export end_iomem
uml-system-call-restart-fixes.patch
uml: system call restart fixes
uml-fix-setting-of-tif_sigpending.patch
uml: Fix setting of TIF_SIGPENDING
uml-allow-vsyscall-code-to-build-on-24.patch
uml: Allow vsyscall code to build on 2.4
uml-sysemu-fixes.patch
uml: SYSEMU fixes
uml-correctly-restore-extramask-in-sigreturn.patch
uml: correctly restore extramask in sigreturn
uml-fix-update_process_times-call.patch
uml: fix update_process_times call
uml-detect-sysemu_singlestep.patch
uml: detect SYSEMU_SINGLESTEP
uml-use-sysemu_singlestep.patch
uml: use SYSEMU_SINGLESTEP
uml-declare-ptrace_setfpregs.patch
uml: declare ptrace_setfpregs
uml-remove-bogus-__nr_sigreturn-check.patch
uml: Remove bogus __NR_sigreturn check
uml-fix-highmem-compilation.patch
uml: Fix highmem compilation
uml-symbol-export.patch
uml: symbol export
uml-fix-umldir-init-order.patch
uml: fix umldir init order
uml-raise-tty-limit.patch
uml: raise tty limit
uml-sysfs-support-for-uml-network-driver.patch
uml: sysfs support for uml network driver.
uml-sysfs-support-for-the-uml-block-devices.patch
uml: sysfs support for the uml block devices.
s390-remove-compat-setup_arg_pages32.patch
s390: remove compat setup_arg_pages32
s390-core-patches.patch
s390: core patches
s390-common-i-o-layer.patch
s390: Common I/O layer
s390-network-device-driver-patches.patch
s390: Network device driver patches
s390-dasd-driver.patch
s390: DASD driver
s390-character-device-drivers.patch
s390: Character device drivers
s390-dcss-driver-cleanup-fix.patch
s390: DCSS driver cleanup fix
s390-sclp-device-driver-cleanup.patch
From: Heiko Carstens <[email protected]>
Subject: [PATCH 8/8] s390: SCLP device driver cleanup
enhanced-i-o-accounting-data-patch.patch
enhanced I/O accounting data patch
enhanced-memory-accounting-data-collection.patch
enhanced Memory accounting data collection
enhanced-memory-accounting-data-collection-tidy.patch
enhanced-memory-accounting-data-collection-tidy
wacom-tablet-driver.patch
wacom tablet driver
force-feedback-support-for-uinput.patch
Force feedback support for uinput
kmap_atomic-takes-char.patch
kmap_atomic takes char*
kmap_atomic-takes-char-fix.patch
kmap_atomic-takes-char-fix
kmap_atomic-fallout.patch
kmap_atomic fallout
kunmap-fallout-more-fixes.patch
kunmap-fallout-more-fixes
4-4gb-incorrect-bound-check-in-do_getname.patch
4/4GB: Incorrect bound check in do_getname()
handle-quoted-module-parameters.patch
handle quoted module parameters
CONFIG_SOUND_VIA82CXXX_PROCFS.patch
Add CONFIG_SOUND_VIA82CXXX_PROCFS
make-sysrq-f-call-oom_kill.patch
make sysrq-F call oom_kill()
allow-admin-to-enable-only-some-of-the-magic-sysrq-functions.patch
Allow admin to enable only some of the Magic-Sysrq functions
gen_init_cpio-symlink-pipe-socket-support.patch
gen_init_cpio symlink, pipe and socket support
gen_init_cpio-slink_pipe_sock_2.patch
gen_init_cpio-slink_pipe_sock_2
initramfs-allow-no-trailer.patch
INITRAMFS: allow no trailer
move-irq_enter-and-irq_exit-to-common-code.patch
move irq_enter and irq_exit to common code
remove-unused-irq_cpustat-fields.patch
remove unused irq_cpustat fields
hold-bkl-for-shorter-period-in-generic_shutdown_super.patch
Hold BKL for shorter period in generic_shutdown_super().
cleanups-for-the-ipmi-driver.patch
Cleanups for the IPMI driver
htree-telldir-fix.patch
ext3 htree telldir() fix
kill-blkh.patch
kill blk.h
ext3-cleanup-handling-of-aborted-transactions.patch
ext3: cleanup handling of aborted transactions.
ext3-handle-attempted-delete-of-bitmap-blocks.patch
ext3: handle attempted delete of bitmap blocks.
ext3-handle-attempted-double-delete-of-metadata.patch
ext3: handle attempted double-delete of metadata.
cpumask_t-initializers.patch
cpumask_t initializers
time-run-too-fast-after-s3.patch
time runx too fast after S3
fork-total_forks-not-counted-under-tasklist_lock.patch
fork: total_forks not counted under tasklist_lock
suppress-might_sleep-if-oopsing.patch
suppress might_sleep() if oopsing
file-sync-no-i_sem.patch
Reduce i_sem usage during file sync operations
ext3-support-for-ea-in-inode.patch
ext3: support for EA in inode
ext3-support-for-ea-in-inode-warning-fix.patch
ext3-xattr-warning-fix
off-by-one-in-drivers-parport-probec.patch
Off by one in drivers/parport/probe.c
compile-with-ffreestanding.patch
compile with -ffreestanding
sys_stime-needs-a-compat-function.patch
sys_stime needs a compat function
sys_stime-needs-a-compat-function-update.patch
sync-in-core-time-granuality-with-filesystems.patch
Sync in core time granuality with filesystems
sync-in-core-time-granuality-with-filesystems-sonypi-fix.patch
sync-in-core-time-granuality-with-filesystems-sonypi-fix
remove-ip2-programs.patch
remove ip2 programs
rcu-eliminate-rcu_ctrlblklock.patch
rcu: eliminate rcu_ctrlblk.lock
rcu-make-two-internal-structs-static.patch
rcu: make two internal structs static
rcu-simplify-quiescent-state-detection.patch
rcu: simplify quiescent state detection
smb_file_open-retval-fix.patch
smb_file_open() retval fix
sys_sched_setaffinity-on-up-should-fail-for-non-zero.patch
sys_sched_setaffinity() on UP should fail for non-zero CPUs.
make-gconfig-work-with-gtk-24.patch
make gconfig work with gtk-2.4
edd-add-edd=off-and-edd=skipmbr-options.patch
EDD: add edd=off and edd=skipmbr options
panic_timeout-move-to-kernelh.patch
panic_timeout: move to kernel.h
add-pr_get_name.patch
Add PR_GET_NAME
fix-alt-sysrq-deadlock.patch
fix alt-sysrq deadlock
cpumask-range-check-before-using-value.patch
cpumask: range check before using value
noop-iosched-make-code-static.patch
noop iosched: make code static
noop-iosched-remove-unused-includes.patch
noop iosched: remove unused includes
loop-device-recursion-avoidance.patch
loop device resursion avoidance
noone-uses-have_arch_si_codes-or-have_arch_sigevent_t.patch
noone uses HAVE_ARCH_SI_CODES or HAVE_ARCH_SIGEVENT_T
get_blkdev_list-cleanup.patch
get_blkdev_list() cleanup
ext-apply-umask-to-symlinks-with-acls-configured-out.patch
Ext[23]: apply umask to symlinks with ACLs configured out
fix-missing-wakeup-in-ipc-sem.patch
fix missing wakeup in ipc/sem
irq-resource-deallocation-acpi.patch
IRQ resource deallocation: ACPI
irq-resource-deallocation-ia64.patch
IRQ resource deallocation: ia64
ioctl-rework.patch
ioctl rework
__getblk_slow-can-loop-forever-when-pages-are-partially.patch
__getblk_slow can loop forever when pages are partially mapped
remove-rcu-abuse-in-cpu_idle.patch
Remove RCU abuse in cpu_idle()
remove-rcu-abuse-in-cpu_idle-warning-fix.patch
remove-rcu-abuse-in-cpu_idle-warning-fix
udf-simplify-udf_iget-fix-race.patch
udf: simplify udf_iget, fix race
udf-fix-reservation-discarding.patch
udf: fix reservation discarding
remove-dead-ext3_put_inode-prototype.patch
remove dead ext3_put_inode prototype
compat-sigtimedwait.patch
compat: sigtimedwait
compat-sigtimedwait-sparc64-fix.patch
compat-sigtimedwait-sparc64-fix
compat-sigtimedwait-ppc64-fix.patch
compat-sigtimedwait ppc64 fix
msync-set-PF_SYNCWRITE.patch
msync(): set PF_SYNCWRITE
prio_tree-roll-call-to-prio_tree_first-into-prio_tree_next.patch
prio_tree: roll call to prio_tree_first into prio_tree_next
prio_tree-generalization.patch
prio_tree: generalization
prio_tree-move-general-code-from-mm-to-lib.patch
prio_tree: move general code from mm/ to lib/
lcd-fix-memory-leak-code-cleanup.patch
lcd: fix memory leak, code cleanup
initramfs-unprivileged-image-creation.patch
initramfs: unprivileged image creation
fix-conflicting-cpu_idle-declarations.patch
fix conflicting cpu_idle() declarations
removes-redundant-sys_delete_module.patch
remove redundant sys_delete_module()
fix-stop-signal-race.patch
fix stop signal race
move-group_exit-flag-into-signal_structflags-word.patch
move group_exit flag into signal_struct.flags word
fix-ptracer-death-race-yielding-bogus-bug_on.patch
fix ptracer death race yielding bogus BUG_ON
move-waitchld_exit-from-task_struct-to-signal_struct.patch
move waitchld_exit from task_struct to signal_struct
task_structexit_state-usage.patch
task_struct.exit_state usage
trivial-uninline-kill-__exit_mm.patch
uninline/kill __exit_mm()
selinux-scalability-add-spin_trylock_irq-and.patch
SELinux scalability: add spin_trylock_irq and spin_trylock_irqsave
selinux-scalability-convert-avc-to-rcu.patch
SELinux scalability: convert AVC to RCU
selinux-scalability-convert-avc-to-rcu-fix.patch
SELinux: fix bug in avc_update_node()
selinux-atomic_dec_and_test-bug.patch
SELinux: atomic_dec_and_test() bug
selinux-scalability-avc-statistics-and-tuning.patch
SELinux scalability: AVC statistics and tuning
selinux-regenerate-selinux-module-headers.patch
SELinux: regenerate SELinux module headers
selinux-update-selinux_task_setscheduler.patch
SELinux: update selinux_task_setscheduler
selinux-audit-task-comm-if-exe-cannot-be-determined.patch
SELinux: audit task comm if exe cannot be determined
selinux-add-dynamic-context-transition-support-to-selinux.patch
SELinux: add dynamic context transition support to SELinux
selinux-enhance-selinux-control-of-executable-mappings.patch
SELinux: enhance SELinux control of executable mappings
selinux-add-member-node-to-selinuxfs.patch
SELinux: add member node to selinuxfs
selinux-eliminate-unaligned-accesses-by-policy-loading-code.patch
SELinux: eliminate unaligned accesses by policy loading code
oprofile-add-check_user_page_readable.patch
oprofile: add check_user_page_readable()
oprofile-arch-independent-code-for-stack-trace.patch
oprofile: arch-independent code for stack trace sampling
oprofile-arch-independent-code-for-stack-trace-rename-timer_init.patch
oprofile-arch-independent-code-for-stack-trace: rename timer_init
oprofile-timer-backtrace-fix-2.patch
oprofile: backtrace operation does not initialized
oprofile-i386-support-for-stack-trace-sampling.patch
oprofile: i386 support for stack trace sampling
oprofile-i386-support-for-stack-trace-sampling-cleanup.patch
oprofile-i386-support-for-stack-trace-sampling-cleanup
oprofile-i386-support-for-stack-trace-sampling-fix.patch
oprofile-i386-support-for-stack-trace-sampling x86_64 fix
oprofile-ia64-support-for-oprofile-stack-trace.patch
oprofile: ia64 support for oprofile stack trace sampling
oprofile-update-alpha-for-api-changes.patch
oprofile: update alpha for api changes
oprofile-update-arm-for-api-changes.patch
oprofile: update arm for api changes
oprofile-update-ppc-for-api-changes.patch
oprofile: update ppc for api changes
oprofile-update-parisc-for-api-changes.patch
oprofile: update parisc for api changes
oprofile-update-s390-for-api-changes.patch
oprofile: update s390 for api changes
oprofile-update-sh-for-api-changes.patch
oprofile: update sh for api changes
oprofile-update-sparc64-for-api-changes.patch
oprofile: update sparc64 for api changes
oprofile-minor-cleanups.patch
oprofile: minor cleanups
pcmcia-new-ds-cs-interface.patch
pcmcia: new ds - cs interface
pcmcia-call-device-drivers-from-ds-not-from-cs.patch
pcmcia: call device drivers from ds, not from cs
pcmcia-unify-bind_mtd-and-pcmcia_bind_mtd.patch
pcmcia: unify bind_mtd and pcmcia_bind_mtd
pcmcia-unfiy-bind_device-and-pcmcia_bind_device.patch
pcmcia: unfiy bind_device and pcmcia_bind_device
pcmcia-device-model-integration-can-only-be-submitted-under-gpl.patch
pcmcia: device model integration can only be submitted under GPL
pcmcia-add-pcmcia_devices.patch
pcmcia: add pcmcia_device(s)
pcmcia-remove-socket_bind_t-use-pcmcia_devices-instead.patch
pcmcia: remove socket_bind_t, use pcmcia_devices instead
pcmcia-remove-internal-module-use-count-use-module_refcount-instead.patch
pcmcia: remove internal module use count, use module_refcount instead
pcmcia-set-drivers-owner-field.patch
pcmcia: set driver's .owner field
pcmcia-move-pcmcia_unregister_client-to-ds.patch
pcmcia: move pcmcia_(un,)register_client to ds
pcmcia-device-model-integration-can-only-be-submitted-under-gpl-part-2.patch
pcmcia: device model integration can only be submitted under GPL, part 2
pcmcia-use-kref-instead-of-native-atomic-counter.patch
pcmcia: use kref instead of native atomic counter
pcmcia-add-pcmcia_putget_socket.patch
pcmcia: add pcmcia_(put,get)_socket
pcmcia-grab-a-reference-to-the-cs-socket-in-ds.patch
pcmcia: grab a reference to the cs-socket in ds
pcmcia-get-a-reference-to-ds-socket-for-each-pcmcia_device.patch
pcmcia: get a reference to ds-socket for each pcmcia_device
pcmcia-add-a-pointer-to-client-in-struct-pcmcia_device.patch
pcmcia: add a pointer to client in struct pcmcia_device
pcmcia-use-pcmcia_device-in-send_event.patch
pcmcia: use pcmcia_device in send_event
pcmcia-use-pcmcia_device-to-mark-clients-as-stale.patch
pcmcia: use pcmcia_device to mark clients as stale
pcmcia-code-moving-in-ds.patch
pcmcia: code moving in ds
pcmcia-use-pcmcia_device-in-register_client.patch
pcmcia: use pcmcia_device in register_client
pcmcia-direct-ordered-unbind-of-devices.patch
pcmcia: direct-ordered unbind of devices
pcmcia-bug-on-dev_list-=-null.patch
pcmcia: BUG on dev_list != NULL
pcmcia-bug-if-clients-are-kept-too-long.patch
pcmcia: BUG() if clients are kept too long
pcmcia-move-struct-client_t-inside-struct-pcmcia_device.patch
pcmcia: move struct client_t inside struct pcmcia_device
pcmcia-use-driver_find-in-ds.patch
pcmcia: use driver_find in ds
pcmcia-set_netdev-for-network-devices.patch
pcmcia: SET_NETDEV for network devices
pcmcia-set_netdev-for-wireless-network-devices.patch
pcmcia: SET_NETDEV for wireless network devices
pcmcia-reduce-stack-usage-in-ds_ioctl-randy-dunlap.patch
pcmcia: reduce stack usage in ds_ioctl (Randy Dunlap)
pcmcia-add-disable_clkrun-option.patch
pcmcia: Add disable_clkrun option
pcmcia-rename-pcmcia-devices.patch
pcmcia: rename PCMCIA devices
pcmcia-pd6729-e-mail-update.patch
pcmcia: pd6729: e-mail update
pcmcia-pd6729-cleanups.patch
pcmcia: pd6729: cleanups
pcmcia-pd6729-isa_irq-handling.patch
pcmcia: pd6729: isa_irq handling
pcmcia-remove-obsolete-code.patch
pcmcia: remove obsolete code
pcmcia-remove-pending_events.patch
pcmcia: remove pending_events
pcmcia-remove-client_attributes.patch
pcmcia: remove client_attributes
pcmcia-remove-unneeded-parameter-from-rsrc_mgr.patch
pcmcia: remove unneeded parameter from rsrc_mgr
pcmcia-remove-dev_info-from-client.patch
pcmcia: remove dev_info from client
pcmcia-remove-mtd-and-bulkmem-replaced-by-pcmciamtd.patch
pcmcia: remove mtd and bulkmem (replaced by pcmciamtd)
pcmcia-per-socket-resource-database.patch
pcmcia: per-socket resource database
pcmcia-validate_mem-only-for-non-statically-mapped-sockets.patch
pcmcia: validate_mem only for non-statically mapped sockets
pcmcia-adjust_io_region-only-for-non-statically-mapped-sockets.patch
pcmcia: adjust_io_region only for non-statically mapped sockets
pcmcia-find_io_region-only-for-non-statically-mapped-sockets.patch
pcmcia: find_io_region only for non-statically mapped sockets
pcmcia-find_mem_region-only-for-non-statically-mapped-sockets.patch
pcmcia: find_mem_region only for non-statically mapped sockets
pcmcia-adjust_-and-release_resources-only-for-non-statically-mapped-sockets.patch
pcmcia: adjust_ and release_resources only for non-statically mapped sockets
pcmcia-move-resource-handling-code-only-for-non-statically-mapped-sockets-to-other-file.patch
pcmcia: move resource handling code only for non-statically mapped sockets to other file
pcmcia-make-rsrc_nonstatic-an-independend-module.patch
pcmcia: make rsrc_nonstatic an independend module
pcmcia-allocate-resource-database-per-socket.patch
pcmcia: allocate resource database per-socket
pcmcia-remove-typedef.patch
pcmcia: remove typedef
pcmcia-grab-lock-in-resource_release.patch
pcmcia: grab lock in resource_release
knfsd-nfsd_translate_wouldblocks.patch
knfsd: nfsd_translate_wouldblocks
knfsd-svcrpc-auth_null-fixes.patch
knfsd: svcrpc: auth_null fixes
knfsd-svcrpc-share-code-duplicated-between-auth_unix-and-auth_null.patch
knfsd: svcrpc: share code duplicated between auth_unix and auth_null
knfsd-nfsd4-fix-open_downgrade-decode-error.patch
knfsd: nfsd4: fix open_downgrade decode error.
knfsd-rpcsec_gss-comparing-pointer-to-0-instead-of-null.patch
knfsd: rpcsec_gss: comparing pointer to 0 instead of NULL
knfsd-nfsd4-fix-fileid-in-readdir-responses.patch
knfsd: nfsd4: fix fileid in readdir responses
knfsd-nfsd4-use-the-fsid-export-option-when-returning-the-fsid-attribute.patch
knfsd: nfsd4: use the fsid export option when returning the fsid attribute
knfsd-nfsd4-encode_dirent-cleanup.patch
knfsd: nfsd4 encode_dirent cleanup
knfsd-nfsd4-encode_dirent-superfluous-assignment.patch
knfsd: nfsd4: encode_dirent: superfluous assignment
knfsd-nfsd4-encode_dirent-superfluous-local-variables.patch
knfsd: nfsd4: encode_dirent: superfluous local variables
knfsd-nfsd4-encode_dirent-more-readdir-attribute-encoding-to-new-function.patch
knfsd: nfsd4: encode_dirent: more readdir attribute encoding to new function
knfsd-nfsd4-encode_dirent-simplify-nfs4_encode_dirent_fattr.patch
knfsd: nfsd4: encode_dirent: simplify nfs4_encode_dirent_fattr
knfsd-nfsd4-encode_dirent-move-rdattr_error-code-to-new-function.patch
knfsd: nfsd4: encode_dirent: move rdattr_error code to new function
knfsd-nfsd4-encode_dirent-simplify-error-handling.patch
knfsd: nfsd4: encode_dirent: simplify error handling
knfsd-nfsd4-encode_dirent-simplify-control-flow.patch
knfsd: nfsd4: encode_dirent: simplify control flow
knfsd-nfsd4-encode_dirent-fix-dropit-return.patch
knfsd: nfsd4: encode_dirent: fix dropit return
knfsd-nfsd4-encode_dirent-trivial-cleanup.patch
knfsd: nfsd4: encode_dirent: trivial cleanup
knfsd-move-nfserr_openmode-checking-from-nfsd_read-write-into-nfs4_preprocess_stateid_op-in-preperation-for-delegation-state.patch
knfsd: move nfserr_openmode checking from nfsd_read/write into nfs4_preprocess_stateid_op() in preperation for delegation state.
knfsd-check-the-callback-netid-in-gen_callback.patch
knfsd: check the callback netid in gen_callback.
knfsd-count-the-nfs4_client-structure-usage.patch
knfsd: count the nfs4_client structure usage
knfsd-preparation-for-delegation-client-callback-probe.patch
knfsd: preparation for delegation: client callback probe
knfsd-preparation-for-delegation-client-callback-probe-warning-fixes.patch
knfsd-preparation-for-delegation-client-callback-probe-warning-fixes
knfsd-probe-the-callback-path-upon-a-successful-setclientid_confirm.patch
knfsd: probe the callback path upon a successful setclientid_confirm
knfsd-check-for-existence-of-file_lock-parameter-inside-of-the-kernel-lock.patch
knfsd: check for existence of file_lock parameter inside of the kernel lock.
knfsd-get-rid-of-the-special-delegation_stateid_t-use-the-existing-stateid_t.patch
knfsd: get rid of the special delegation_stateid_t, use the existing stateid_t.
knfsd-add-structures-for-delegation-support.patch
knfsd: add structures for delegation support
knfsd-allocate-and-initialize-the-delegation-structure.patch
knfsd: allocate and initialize the delegation structure.
knfsd-find-a-delegation-for-a-file-given-a-stateid.patch
knfsd: find a delegation for a file given a stateid.
knfsd-add-the-delegation-release-and-free-functions.patch
knfsd: add the delegation release and free functions
knfsd-changes-to-expire_client.patch
knfsd: changes to expire_client
knfsd-delay-nfsd_colse-for-delegations-until-reaping.patch
knfsd: delay nfsd_colse for delegations until reaping
knfsd-delegation-recall-callback-rpc.patch
knfsd: delegation recall callback rpc.
knfsd-kernel-thread-for-delegation-callback.patch
knfsd: kernel thread for delegation callback
knfsd-helper-functions-for-deciding-to-grant-a-delegation.patch
knfsd: helper functions for deciding to grant a delegation.
knfsd-attempt-to-hand-out-a-delegation.patch
knfsd: attempt to hand out a delegation
knfsd-remove-unnecessary-stateowner-existence-check.patch
knfsd: remove unnecessary stateowner existence check.
knfsd-check-for-openmode-violations-given-a-delegation-stateid.patch
knfsd: check for openmode violations given a delegation stateid.
knfsd-add-checking-of-delegation-stateids-to-nfs4_preprocess_stateid_op.patch
knfsd: add checking of delegation stateids to nfs4_preprocess_stateid_op.
knfsd-add-the-delegreturn-operation.patch
knfsd: add the DELEGRETURN operation.
knfsd-add-to-the-laundromat-service-for-delegations.patch
knfsd: add to the laundromat service for delegations.
knfsd-clear-the-recall_lru-of-delegations-at-shutdown.patch
knfsd: clear the recall_lru of delegations at shutdown
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
Fix stack overflow test for non-8k stacks kgdb-ga.patch fix for i386 single-step into sysenter fix TRAP_BAD_SYSCALL_EXITS on i386
add TRAP_BAD_SYSCALL_EXITS config for i386 kgdb-is-incompatible-with-kprobes kgdb-ga-build-fix
kgdb-ga-fixes
kgdb-kill-off-highmem_start_page.patch
kgdb: kill off highmem_start_page
kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address
kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-x86_64-fix
kgdb-x86_64-serial-fix
kprobes exception notifier fix
invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes
dev-mem-restriction-patch.patch
/dev/mem restriction patch
dev-mem-restriction-patch-allow-reads.patch
dev-mem-restriction-patch: allow reads
jbd-remove-livelock-avoidance.patch
JBD: remove livelock avoidance code in journal_dirty_data()
journal_add_journal_head-debug.patch
journal_add_journal_head-debug
list_del-debug.patch
list_del debug check
unplug-can-sleep.patch
unplug functions can sleep
firestream-warnings.patch
firestream warnings
perfctr-core.patch
perfctr: core
perfctr-i386.patch
perfctr: i386
perfctr-x86-core-updates.patch
perfctr x86 core updates
perfctr-x86-driver-updates.patch
perfctr x86 driver updates
perfctr-x86-driver-cleanup.patch
perfctr: x86 driver cleanup
perfctr-prescott-fix.patch
Prescott fix for perfctr
perfctr-x86-update-2.patch
perfctr x86 update 2
perfctr-x86_64.patch
perfctr: x86_64
perfctr-x86_64-core-updates.patch
perfctr x86_64 core updates
perfctr-ppc.patch
perfctr: PowerPC
perfctr-ppc32-driver-update.patch
perfctr: ppc32 driver update
perfctr-ppc32-mmcr0-handling-fixes.patch
perfctr ppc32 MMCR0 handling fixes
perfctr-ppc32-update.patch
perfctr ppc32 update
perfctr-ppc32-update-2.patch
perfctr ppc32 update
perfctr-virtualised-counters.patch
perfctr: virtualised counters
perfctr-remap_page_range-fix.patch
virtual-perfctr-illegal-sleep.patch
virtual perfctr illegal sleep
make-perfctr_virtual-default-in-kconfig-match-recommendation.patch
Make PERFCTR_VIRTUAL default in Kconfig match recommendation in help text
perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup
perfctr-update-2-6-kconfig-related-updates.patch
perfctr: Kconfig-related updates
perfctr-virtual-updates.patch
perfctr virtual updates
perfctr-virtual-cleanup.patch
perfctr: virtual cleanup
perfctr-ppc32-preliminary-interrupt-support.patch
perfctr ppc32 preliminary interrupt support
perfctr-update-5-6-reduce-stack-usage.patch
perfctr: reduce stack usage
perfctr-interrupt-support-kconfig-fix.patch
perfctr interrupt_support Kconfig fix
perfctr-low-level-documentation.patch
perfctr low-level documentation
perfctr-inheritance-1-3-driver-updates.patch
perfctr inheritance: driver updates
perfctr-inheritance-2-3-kernel-updates.patch
perfctr inheritance: kernel updates
perfctr-inheritance-3-3-documentation-updates.patch
perfctr inheritance: documentation updates
perfctr-inheritance-locking-fix.patch
perfctr inheritance locking fix
perfctr-api-changes-first-step.patch
perfctr API changes: first step
perfctr-virtual-update.patch
perfctr virtual update
perfctr-x86-64-ia32-emulation-fix.patch
perfctr x86-64 ia32 emulation fix
perfctr-sysfs-update-1-4-core.patch
perfctr sysfs update: core
perfctr-sysfs-update.patch
Perfctr sysfs update
perfctr-sysfs-update-2-4-x86.patch
perfctr sysfs update: x86
perfctr-sysfs-update-3-4-x86-64.patch
perfctr sysfs update: x86-64
perfctr-sysfs-update-4-4-ppc32.patch
perfctr sysfs update: ppc32
sched-more-agressive-wake_idle.patch
sched: more agressive wake_idle()
sched-can_migrate-exception-for-idle-cpus.patch
sched: can_migrate exception for idle cpus
sched-newidle-fix.patch
sched: newidle fix
sched-active_load_balance-fixlet.patch
sched: active_load_balance() fixlet
sched-reset-cache_hot_time.patch
sched: reset cache_hot_time
schedc-whitespace-mangler.patch
sched.c whitespace mangler
sched-alter_kthread_prio.patch
sched: alter_kthread_prio
sched-adjust_timeslice_granularity.patch
sched: adjust_timeslice_granularity
sched-add_requeue_task.patch
sched: add_requeue_task
requeue_granularity.patch
sched: requeue_granularity
sched-remove_interactive_credit.patch
sched: remove_interactive_credit
sched-use-cached-current-value.patch
sched: use cached current value
dont-hide-thread_group_leader-from-grep.patch
don't hide thread_group_leader() from grep
sched-no-need-to-recalculate-rq.patch
sched: no need to recalculate rq
export-sched_setscheduler-for-kernel-module-use.patch
export sched_setscheduler() for kernel module use
add-do_proc_doulonglongvec_minmax-to-sysctl-functions.patch
Add do_proc_doulonglongvec_minmax to sysctl functions add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix add-do_proc_doulonglongvec_minmax-to-sysctl-functions fix 2
add-sysctl-interface-to-sched_domain-parameters.patch
Add sysctl interface to sched_domain parameters
preempt-smp.patch
improve preemption on SMP
preempt-smp-_raw_read_trylock-bias-fix.patch
preempt-smp _raw_read_trylock bias fix
preempt-cleanup.patch
preempt cleanup
preempt-cleanup-fix.patch
preempt-cleanup-fix
add-lock_need_resched.patch
add lock_need_resched()
sched-add-cond_resched_softirq.patch
sched: add cond_resched_softirq()
sched-ext3-fix-scheduling-latencies-in-ext3.patch
sched: ext3: fix scheduling latencies in ext3
break-latency-in-invalidate_list.patch
break latency in invalidate_list()
sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent.patch
sched: vfs: fix scheduling latencies in prune_dcache() and select_parent()
sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent-fix.patch
sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent fix
sched-net-fix-scheduling-latencies-in-netstat.patch
sched: net: fix scheduling latencies in netstat
sched-net-fix-scheduling-latencies-in-__release_sock.patch
sched: net: fix scheduling latencies in __release_sock
sched-mm-fix-scheduling-latencies-in-unmap_vmas.patch
sched: mm: fix scheduling latencies in unmap_vmas()
sched-mm-fix-scheduling-latencies-in-get_user_pages.patch
sched: mm: fix scheduling latencies in get_user_pages()
sched-mm-fix-scheduling-latencies-in-filemap_sync.patch
sched: mm: fix scheduling latencies in filemap_sync()
fix-keventd-execution-dependency.patch
fix keventd execution dependency
sched-fix-scheduling-latencies-in-mttrc.patch
sched: fix scheduling latencies in mttr.c
sched-fix-scheduling-latencies-in-mttrc-reenables-interrupts.patch
sched-fix-scheduling-latencies-in-mttrc reenables interrupts
sched-fix-scheduling-latencies-in-vgaconc.patch
sched: fix scheduling latencies in vgacon.c
sched-fix-scheduling-latencies-for-preempt-kernels.patch
sched: fix scheduling latencies for !PREEMPT kernels
idle-thread-preemption-fix.patch
idle thread preemption fix
oprofile-smp_processor_id-fixes.patch
oprofile smp_processor_id() fixes
fix-smp_processor_id-warning-in-numa_node_id.patch
Fix smp_processor_id() warning in numa_node_id()
replace-numnodes-with-node_online_map-alpha.patch
Subject: [RFC PATCH 1/10] Replace 'numnodes' with 'node_online_map' - alpha
replace-numnodes-with-node_online_map-arm.patch
Subject: [RFC PATCH 2/10] Replace 'numnodes' with 'node_online_map' - arm
replace-numnodes-with-node_online_map-i386.patch
Subject: [RFC PATCH 3/10] Replace 'numnodes' with 'node_online_map' - i386
replace-numnodes-with-node_online_map-ia64.patch
Subject: [RFC PATCH 4/10] Replace 'numnodes' with 'node_online_map' - ia64
replace-numnodes-with-node_online_map-m32r.patch
Subject: [RFC PATCH 5/10] Replace 'numnodes' with 'node_online_map' - m32r
replace-numnodes-with-node_online_map-mips.patch
Subject: [RFC PATCH 6/10] Replace 'numnodes' with 'node_online_map' - mips
replace-numnodes-with-node_online_map-parisc.patch
Subject: [RFC PATCH 7/10] Replace 'numnodes' with 'node_online_map' - parisc
replace-numnodes-with-node_online_map-ppc64.patch
Subject: [RFC PATCH 8/10] Replace 'numnodes' with 'node_online_map' - ppc64
replace-numnodes-with-node_online_map-x86_64.patch
Subject: [RFC PATCH 9/10] Replace 'numnodes' with 'node_online_map' - x86_64
replace-numnodes-with-node_online_map.patch
Subject: [RFC PATCH 10/10] Replace 'numnodes' with 'node_online_map' - arch-independent
vmtrunc-truncate_count-not-atomic.patch
vmtrunc: truncate_count not atomic
vmtrunc-restore-unmap_vmas-zap_bytes.patch
vmtrunc: restore unmap_vmas zap_bytes
vmtrunc-unmap_mapping_range_tree.patch
vmtrunc: unmap_mapping_range_tree
vmtrunc-unmap_mapping-dropping-i_mmap_lock.patch
vmtrunc: unmap_mapping dropping i_mmap_lock
vmtrunc-vm_truncate_count-race-caution.patch
vmtrunc: vm_truncate_count race caution
vmtrunc-bug-if-page_mapped.patch
vmtrunc: bug if page_mapped
vmtrunc-restart_addr-in-truncate_count.patch
vmtrunc: restart_addr in truncate_count
remove-the-bkl-by-turning-it-into-a-semaphore.patch
remove the BKL by turning it into a semaphore
oprofile-preempt-warning-fixes.patch
oprofile preempt warning fixes
smp_processor_id-commentary.patch
smp_processor_id() commentary
cpu_down-warning-fix.patch
cpu_down() warning fix
linux-2.6.8.1-49-rpc_workqueue.patch
nfs: RPC: Convert rpciod into a work queue for greater flexibility
linux-2.6.8.1-50-rpc_queue_lock.patch
nfs: RPC: Remove the rpc_queue_lock global spinlock
allow-modular-ide-pnp.patch
allow modular ide-pnp
allow-x86_64-to-reenable-interrupts-on-contention.patch
Allow x86_64 to reenable interrupts on contention
i386-cpu-hotplug-updated-for-mm.patch
i386 CPU hotplug updated for -mm
ppc64-fix-cpu-hotplug.patch
ppc64: fix hotplug cpu
serialize-access-to-ide-devices.patch
serialize access to ide devices
disable-atykb-warning.patch
disable atykb "too many keys pressed" warning
export-file_ra_state_init-again.patch
Export file_ra_state_init() again
cachefs-filesystem.patch
CacheFS filesystem
numa-policies-for-file-mappings-mpol_mf_move-cachefs.patch
numa-policies-for-file-mappings-mpol_mf_move for cachefs
cachefs-release-search-records-lest-they-return-to-haunt-us.patch
CacheFS: release search records lest they return to haunt us
fix-64-bit-problems-in-cachefs.patch
Fix 64-bit problems in cachefs
cachefs-fixed-typos-that-cause-wrong-pointer-to-be-kunmapped.patch
cachefs: fixed typos that cause wrong pointer to be kunmapped
cachefs-return-the-right-error-upon-invalid-mount.patch
CacheFS: return the right error upon invalid mount
fix-cachefs-barrier-handling-and-other-kernel-discrepancies.patch
Fix CacheFS barrier handling and other kernel discrepancies
remove-error-from-linux-cachefsh.patch
Remove #error from linux/cachefs.h
cachefs-warning-fix-2.patch
cachefs warning fix 2
cachefs-linkage-fix-2.patch
cachefs linkage fix
cachefs-build-fix.patch
cachefs build fix
cachefs-documentation.patch
CacheFS documentation
add-page-becoming-writable-notification.patch
Add page becoming writable notification
add-page-becoming-writable-notification-fix.patch
do_wp_page_mk_pte_writable() fix
provide-a-filesystem-specific-syncable-page-bit.patch
Provide a filesystem-specific sync'able page bit
provide-a-filesystem-specific-syncable-page-bit-fix.patch
provide-a-filesystem-specific-syncable-page-bit-fix
provide-a-filesystem-specific-syncable-page-bit-fix-2.patch
provide-a-filesystem-specific-syncable-page-bit-fix-2
make-afs-use-cachefs.patch
Make AFS use CacheFS
afs-cachefs-dependency-fix.patch
afs-cachefs-dependency-fix
split-general-cache-manager-from-cachefs.patch
Split general cache manager from CacheFS
turn-cachefs-into-a-cache-backend.patch
Turn CacheFS into a cache backend
rework-the-cachefs-documentation-to-reflect-fs-cache-split.patch
Rework the CacheFS documentation to reflect FS-Cache split
update-afs-client-to-reflect-cachefs-split.patch
Update AFS client to reflect CacheFS split
assign_irq_vector-section-fix.patch
assign_irq_vector __init section fix
kexec-i8259-shutdowni386.patch
kexec: i8259-shutdown.i386
kexec-i8259-shutdown-x86_64.patch
kexec: x86_64 i8259 shutdown
kexec-apic-virtwire-on-shutdowni386patch.patch
kexec: apic-virtwire-on-shutdown.i386.patch
kexec-apic-virtwire-on-shutdownx86_64.patch
kexec: apic-virtwire-on-shutdown.x86_64
kexec-ioapic-virtwire-on-shutdowni386.patch
kexec: ioapic-virtwire-on-shutdown.i386
kexec-apic-virt-wire-fix.patch
kexec: apic-virt-wire fix
kexec-ioapic-virtwire-on-shutdownx86_64.patch
kexec: ioapic-virtwire-on-shutdown.x86_64
kexec-e820-64bit.patch
kexec: e820-64bit
kexec-kexec-generic.patch
kexec: kexec-generic
kexec-ide-spindown-fix.patch
kexec-ide-spindown-fix
kexec-ifdef-cleanup.patch
kexec ifdef cleanup
kexec-machine_shutdownx86_64.patch
kexec: machine_shutdown.x86_64
kexec-kexecx86_64.patch
kexec: kexec.x86_64
kexec-kexecx86_64-4level-fix.patch
kexec-kexecx86_64-4level-fix
kexec-machine_shutdowni386.patch
kexec: machine_shutdown.i386
kexec-kexeci386.patch
kexec: kexec.i386
kexec-use_mm.patch
kexec: use_mm
kexec-loading-kernel-from-non-default-offset.patch
kexec: loading kernel from non-default offset
kexec-loading-kernel-from-non-default-offset-fix.patch
kdump: fix bss compile error
kexec-enabling-co-existence-of-normal-kexec-kernel-and-panic-kernel.patch
kexec: nabling co-existence of normal kexec kernel and panic kernel
kexec-ppc-support.patch
kexec: ppc support
crashdump-documentation.patch
crashdump: documentation
crashdump-memory-preserving-reboot-using-kexec.patch
crashdump: memory preserving reboot using kexec
crashdump-memory-preserving-reboot-using-kexec-fix.patch
kdump: Fix for boot problems on SMP
kdump-config_discontigmem-fix.patch
kdump: CONFIG_DISCONTIGMEM fix
crashdump-routines-for-copying-dump-pages.patch
crashdump: routines for copying dump pages
crashdump-routines-for-copying-dump-pages-kmap-fiddle.patch
crashdump-routines-for-copying-dump-pages-kmap-fiddle
crashdump-kmap-build-fix.patch
crashdump kmap build fix
crashdump-register-snapshotting-before-kexec-boot.patch
crashdump: register snapshotting before kexec boot
crashdump-elf-format-dump-file-access.patch
crashdump: ELF format dump file access
crashdump-linear-raw-format-dump-file-access.patch
crashdump: linear/raw format dump file access
crashdump-minor-bug-fixes-to-kexec-crashdump-code.patch
crashdump: minor bug fixes to kexec crashdump code
crashdump-cleanups-to-the-kexec-based-crashdump-code.patch
crashdump: cleanups to the kexec based crashdump code
x86-rename-apic_mode_exint.patch
x86: rename APIC_MODE_EXINT
x86-local-apic-fix.patch
x86: local apic fix
new-bitmap-list-format-for-cpusets.patch
new bitmap list format (for cpusets)
cpusets-big-numa-cpu-and-memory-placement.patch
cpusets - big numa cpu and memory placement
cpusets-fix-cpuset_get_dentry.patch
cpusets : fix cpuset_get_dentry()
cpusets-fix-race-in-cpuset_add_file.patch
cpusets: fix race in cpuset_add_file()
cpusets-remove-more-casts.patch
cpusets: remove more casts
cpusets-make-config_cpusets-the-default-in-sn2_defconfig.patch
cpusets: make CONFIG_CPUSETS the default in sn2_defconfig
cpusets-document-proc-status-allowed-fields.patch
cpusets: document proc status allowed fields
cpusets-dont-export-proc_cpuset_operations.patch
Cpusets - Dont export proc_cpuset_operations
cpusets-display-allowed-masks-in-proc-status.patch
cpusets: display allowed masks in proc status
cpusets-simplify-cpus_allowed-setting-in-attach.patch
cpusets: simplify cpus_allowed setting in attach
cpusets-remove-useless-validation-check.patch
cpusets: remove useless validation check
cpusets-config_cpusets-depends-on-smp.patch
Cpusets: CONFIG_CPUSETS depends on SMP
cpusets-tasks-file-simplify-format-fixes.patch
Cpusets tasks file: simplify format, fixes
cpusets-simplify-memory-generation.patch
Cpusets: simplify memory generation
cpusets-interoperate-with-hotplug-online-maps.patch
cpusets: interoperate with hotplug online maps
cpusets-alternative-fix-for-possible-race-in.patch
cpusets: alternative fix for possible race in cpuset_tasks_read()
cpusets-remove-casts.patch
cpusets: remove void* typecasts
reiser4-sb_sync_inodes.patch
reiser4: vfs: add super_operations.sync_inodes()
reiser4-allow-drop_inode-implementation.patch
reiser4: export vfs inode.c symbols
reiser4-truncate_inode_pages_range.patch
reiser4: vfs: add truncate_inode_pages_range()
reiser4-export-remove_from_page_cache.patch
reiser4: export pagecache add/remove functions to modules
reiser4-export-page_cache_readahead.patch
reiser4: export page_cache_readahead to modules
reiser4-reget-page-mapping.patch
reiser4: vfs: re-check page->mapping after calling try_to_release_page()
reiser4-rcu-barrier.patch
reiser4: add rcu_barrier() synchronization point
reiser4-export-inode_lock.patch
reiser4: export inode_lock to modules
reiser4-export-pagevec-funcs.patch
reiser4: export pagevec functions to modules
reiser4-export-radix_tree_preload.patch
reiser4: export radix_tree_preload() to modules
reiser4-export-find_get_pages.patch
reiser4-radix-tree-tag.patch
reiser4: add new radix tree tag
reiser4-radix_tree_lookup_slot.patch
reiser4: add radix_tree_lookup_slot()
reiser4-perthread-pages.patch
reiser4: per-thread page pools
reiser4-unstatic-kswapd.patch
reiser4: make kswapd() unstatic for debug
reiser4-include-reiser4.patch
reiser4: add to build system
reiser4-doc.patch
reiser4: documentation
reiser4-only.patch
reiser4: main fs
reiser4-recover-read-performance.patch
reiser4: recover read performance
reiser4-export-find_get_pages_tag.patch
reiser4-export-find_get_pages_tag
reiser4-add-missing-context.patch
add-acpi-based-floppy-controller-enumeration.patch
Add ACPI-based floppy controller enumeration.
possible-dcache-bug-debugging-patch.patch
Possible dcache BUG: debugging patch
3c59x-reload-eeprom-values-at-rmmod-for-needy-cards.patch
3c59x: reload EEPROM values at rmmod for needy cards
3c59x-remove-eeprom_reset-for-3c905b.patch
3c59x: remove EEPROM_RESET for 3c905B
3c59x-add-eeprom_reset-for-3c900-boomerang.patch
3c59x: Add EEPROM_RESET for 3c900 Boomerang
3c59x-pm-fix.patch
3c59x: enable power management unconditionally
3c59x-missing-pci_disable_device.patch
3c59x: missing pci_disable_device
3c59x-use-netdev_priv.patch
3c59x: use netdev_priv
3c59x-make-use-of-generic_mii_ioctl.patch
3c59x: Make use of generic_mii_ioctl
3c59x-vortex-select-mii.patch
3c59x: VORTEX select MII
3c59x-support-more-ethtool_ops.patch
3c59x: support more ethtool_ops
serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
serial: add support for non-standard XTALs to 16c950 driver
add-support-for-possio-gcc-aka-pcmcia-siemens-mc45.patch
Add support for Possio GCC AKA PCMCIA Siemens MC45
new-serial-flow-control.patch
new serial flow control
mpsc-driver-patch.patch
serial: MPSC driver
vm-pageout-throttling.patch
vm: pageout throttling
revert-allow-oem-written-modules-to-make-calls-to-ia64-oem-sal-functions.patch
revert "allow OEM written modules to make calls to ia64 OEM SAL functions"
md-improve-hash-code-in-linearc.patch
md: improve 'hash' code in linear.c
md-add-interface-for-userspace-monitoring-of-events.patch
md: add interface for userspace monitoring of events.
make-acpi_bus_register_driver-consistent-with-pci_register_driver-again.patch
make acpi_bus_register_driver() consistent with pci_register_driver()
enforce-a-gap-between-heap-and-stack.patch
Enforce a gap between heap and stack
remove-lock_section-from-x86_64-spin_lock-asm.patch
remove LOCK_SECTION from x86_64 spin_lock asm
kfree_skb-dump_stack.patch
kfree_skb-dump_stack
for-mm-only-remove-remap_page_range-completely.patch
vm: for -mm only: remove remap_page_range() completely
cancel_rearming_delayed_work.patch
cancel_rearming_delayed_work()
make cancel_rearming_delayed_workqueue static
ipvs-deadlock-fix.patch
ipvs deadlock fix
minimal-ide-disk-updates.patch
Minimal ide-disk updates
no-buddy-bitmap-patch-revist-intro-and-includes.patch
no buddy bitmap patch revist: intro and includes
no-buddy-bitmap-patch-revisit-for-mm-page_allocc.patch
no buddy bitmap patch revisit: for mm/page_alloc.c
no-buddy-bitmap-patch-revisit-for-mm-page_allocc-fix.patch
no-buddy-bitmap-patch-revisit-for-mm-page_allocc fix
no-buddy-bitmap-patch-revist-for-ia64.patch
no buddy bitmap patch revist: for ia64
no-buddy-bitmap-patch-revist-for-ia64-fix.patch
no-buddy-bitmap-patch-revist-for-ia64 fix
use-find_trylock_page-in-free_swap_and_cache-instead-of-hand-coding.patch
use find_trylock_page in free_swap_and_cache instead of hand coding
fbdev-sis-framebuffer-driver-update-1717.patch
fbdev: SiS framebuffer driver update 1.7.17
fbdev-sysfs-fix.patch
fbdev: sysfs fix
pm2fb-module-parameters-and-module-conditional-code.patch
pm2fb: module parameters and module-conditional code
pm2fb-save-restore-memory-config.patch
pm2fb: save/restore memory config
pm2fb-use-modedb-in-modules.patch
pm2fb: use modedb in modules
pm2fb-fix-big-endian-sparc-support.patch
pm2fb: fix big-endian (Sparc) support
pm2fb-fix-fbi-image-display-on-24-bit-depth-big-endian.patch
pm2fb: fix fbi image display on 24 bit depth big endian
fix-rom-enable-disable-in-r128-and-radeon-fb-drivers.patch
fix ROM enable/disable in r128 and radeon fb drivers
fbdev-cleanup-i2c-code-of-rivafb.patch
fbdev: Cleanup i2c code of rivafb
fbdev-revive-bios-less-booting-for-rage-xl-cards.patch
fbdev: Revive BIOS-less booting for Rage XL cards
fbdev-revive-global_mode_option.patch
fbdev: Revive global_mode_option
fbcon-fbdev-add-blanking-notification.patch
fbcon/fbdev: Add blanking notification
fbcon-fbdev-add-blanking-notification-fix.patch
fbcon-fbdev-add-blanking-notification-fix
fbdev-check-return-value-of-fb_add_videomode.patch
fbdev: Check return value of fb_add_videomode
fbdev-do-a-symbol_put-for-each-symbol_get-in-savagefb.patch
fbdev: Do a symbol_put for each symbol_get in savagefb
fbdev-add-viewsonic-pf775a-to-broken-display-database.patch
fbdev: Add Viewsonic PF775a to broken display database
fbdev-fix-default-timings-in-vga16fb.patch
fbdev: Fix default timings in vga16fb
fbdev-reduce-stack-usage-of-intelfb.patch
fbdev: Reduce stack usage of intelfb
zr36067-driver-correct-jpeg-app-com-markers.patch
zr36067 driver - correct jpeg app/com markers
zr36067-driver-ppc-be-port.patch
zr36067 driver - ppc/be port
zr36067-driver-reduce-stack-size-usage.patch
zr36067 driver - reduce stack size usage
raid6-altivec-support.patch
raid6: altivec support
remove-export_symbol_novers.patch
Remove EXPORT_SYMBOL_NOVERS
figure-out-who-is-inserting-bogus-modules.patch
Figure out who is inserting bogus modules
use-mmiowb-in-qla1280c.patch
use mmiowb in qla1280.c
readpage-vs-invalidate-fix.patch
readpage-vs-invalidate fix
invalidate_inode_pages-mmap-coherency-fix.patch
invalidate_inode_pages2() mmap coherency fix
cputime-introduce-cputime.patch
cputime: introduce cputime
cputime-fix-do_setitimer.patch
cputime: fix do_setitimer.
cputime-missing-pieces.patch
cputime: missing pieces.
mm-check_rlimit-oops-on-p-signal.patch
check_rlimit oops on p->signal
cputime-microsecond-based-cputime-for-s390.patch
cputime: microsecond based cputime for s390
detect-atomic-counter-underflows.patch
detect atomic counter underflows
lock-initializer-unifying-batch-2-alpha.patch
Lock initializer unifying: ALPHA
lock-initializer-unifying-batch-2-ia64.patch
Lock initializer unifying: IA64
lock-initializer-unifying-batch-2-m32r.patch
Lock initializer unifying: M32R
lock-initializer-unifying-batch-2-mips.patch
Lock initializer unifying: MIPS
lock-initializer-unifying-batch-2-misc-drivers.patch
Lock initializer unifying: Misc drivers
lock-initializer-unifying-batch-2-block-devices.patch
Lock initializer unifying: Block devices
lock-initializer-unifying-batch-2-drm.patch
Lock initializer unifying: DRM
lock-initializer-unifying-batch-2-character-devices.patch
Lock initializer unifying: character devices
lock-initializer-unifying-batch-2-rio.patch
Lock initializer unifying: RIO
lock-initializer-unifying-batch-2-firewire.patch
Lock initializer unifying: Firewire
lock-initializer-unifying-batch-2-isdn.patch
Lock initializer unifying: ISDN
lock-initializer-unifying-batch-2-raid.patch
Lock initializer unifying: Raid
lock-initializer-unifying-batch-2-media-drivers.patch
Lock initializer unifying: media drivers
lock-initializer-unifying-batch-2-drivers-serial.patch
Lock initializer unifying: drivers/serial
lock-initializer-unifying-batch-2-filesystems.patch
Lock initializer unifying: Filesystems
lock-initializer-unifying-batch-2-video.patch
Lock initializer unifying: Video
lock-initializer-unifying-batch-2-sound.patch
Lock initializer unifying: sound
lock-initializer-cleanup-common-headers.patch
Lock initializer cleanup (common headers)
lock-initializer-cleanup-character-devices.patch
Lock initializer cleanup (character devices)
lock-initializer-cleanup-core.patch
Lock initializer cleanup (Core)
moxa-update-status-of-moxa-smartio-driver.patch
moxa: Update status of Moxa Smartio driver
moxa-remove-ancient-changelog-readmemoxa.patch
moxa: Remove ancient changelog README.moxa
moxa-remove-readmemoxa-from-documentation-00-index.patch
moxa: Remove README.moxa from Documentation/00-INDEX
specialix-remove-bouncing-e-mail-address.patch
specialix: remove bouncing e-mail address
stallion-update-to-documentation-stalliontxt.patch
stallion: Update to Documentation/stallion.txt
riscom8-update-staus-and-documentation-of-driver.patch
riscom8: Update staus and documentation of driver
pm-remove-outdated-docs.patch
From: Pavel Machek <[email protected]>
Subject: pm: remove outdated docs
docs-add-sparse-howto.patch
From: Pavel Machek <[email protected]>
Subject: docs: add sparse howto
cciss-documentation-update.patch
cciss: Documentation update
cciss-correct-mailing-list-address-in-source-code.patch
cciss: Correct mailing list address in source code
cpqarray-correct-mailing-list-address-in-source-code.patch
cpqarray: Correct mailing list address in source code
sh-remove-x86-specific-help-in-kconfig.patch
sh: Remove x86-specific help in Kconfig
cyclades-put-readmecycladez-in-documentation-serial.patch
cyclades: Put README.cycladeZ in Documentation/serial
tipar-document-driver-options.patch
tipar: Document driver options
tipar-code-cleanup.patch
tipar: Code cleanup
eth1394-module_parm-conversion.patch
eth1394 MODULE_PARM conversion
isapnp-module_param-conversion.patch
isapnp module_param conversion
sr-module_param-conversion.patch
sr module_param conversion
media-video-module_param-conversion.patch
media/video module_param conversion
btaudio-module_param-conversion.patch
btaudio module_param conversion
small-drivers-char-rio-cleanups-fwd.patch
small drivers/char/rio/ cleanups
small-char-generic_serialc-cleanup-fwd.patch
small char/generic_serial.c cleanup
debug_bugverbose-for-i386-fwd.patch
DEBUG_BUGVERBOSE for i386
telephony-ixjc-cleanup-fwd.patch
telephony/ixj.c cleanup
char-cycladesc-remove-unused-code-fwd.patch
char/cyclades.c: remove unused code
oss-ac97-quirk-facility.patch
oss: AC97 quirk facility
oss-ac97-quirk-facility-fix.patch
oss-ac97-quirk-facility fix
ext3-use-generic_open_file-to-fix-possible-preemption-bugs.patch
ext3: use generic_open_file to fix possible preemption bugs
bttv-i2cc-make-two-functions-static.patch
bttv-i2c.c: make two functions static
bttv-riscc-make-some-functions-static.patch
bttv-risc.c: make some functions static
bttv-help-fix.patch
bttv help fix
zoran_driverc-make-zoran_num_formats-static.patch
zoran_driver.c: make zoran_num_formats static
media-video-msp3400c-remove-unused-struct-d1.patch
media/video/msp3400.c: remove unused struct d1
zoran_devicec-make-zr36057_init_vfe-static.patch
zoran_device.c: make zr36057_init_vfe static
drivers-media-video-the-easy-cleanups.patch
drivers/media/video: the easy cleanups
small-ftape-cleanups-fwd.patch
small ftape cleanups
reiser3-cleanups.patch
reiser3 cleanups
cdromc-make-several-functions-static.patch
cdrom.c: make several functions static (fwd)
fs-coda-psdevc-shouldnt-include-lph.patch
fs/coda/psdev.c shouldn't include lp.h
remove-early_param-tests.patch
remove early_param test code
MODULE_PARM-allmod.patch
MODULE_PARM conversions
MODULE_PARM-allyes.patch
MODULE_PARM conversions
lockd-fix-two-struct-definitions.patch
lockd: fix two struct definitions
small-mca-cleanups-fwd.patch
small MCA cleanups
small-drivers-media-radio-cleanups-fwd.patch
small drivers/media/radio/ cleanups
ifdef-typos-arch_ppc_platforms_prep_setupc.patch
ifdef typos: arch_ppc_platforms_prep_setup.c
ifdef-typos-arch_ppc_platforms_prep_setupc-another-one.patch
ifdef typos: arch_ppc_platforms_prep_setup.c -another one
ifdef-typos-arch_ppc_syslib_ppc4xx_dmac.patch
ifdef typos: arch_ppc_syslib_ppc4xx_dma.c
ifdef-typos-arch_sh_boards_renesas_hs7751rvoip_ioc.patch
ifdef typos: arch_sh_boards_renesas_hs7751rvoip_io.c
ifdef-typos-drivers_char_ipmi_ipmi_si_intfc.patch
ifdef typos: drivers_char_ipmi_ipmi_si_intf.c
ifdef-typos-drivers_net_wireless_wavelan_csc.patch
ifdef typos: drivers_net_wireless_wavelan_cs.c
ifdef-typos-drivers_usb_net_usbnetc.patch
ifdef typos: drivers_usb_net_usbnet.c
ifdef-typos-mips-au100_usb_device.patch
ifdef typos mips: AU1[0X]00_USB_DEVICE
ipmi-use-c99-struct-inits.patch
IPMI: use C99 struct inits.
drm-remove-unused-functions-fwd.patch
DRM: remove unused functions
floppyc-remove-an-unused-function-fwd.patch
floppy.c: remove an unused function
media-video-ir-kbd-i2cc-remove-an-unused-function-fwd.patch
media/video/ir-kbd-i2c.c: remove an unused function
nfs-remove-an-unused-function-fwd.patch
NFS: remove an unused function
watchdog-machzwdc-remove-unused-functions-fwd.patch
watchdog/machzwd.c: remove unused functions
video-drivers-remove-unused-functions-fwd.patch
video drivers: remove unused functions
isdn-b1pcmciac-remove-an-unused-variable-fwd.patch
ISDN b1pcmcia.c: remove an unused variable
binfmt_scriptc-make-struct-script_format-static-fwd.patch
binfmt_script.c: make struct script_format static
bioc-make-bio_destructor-static-fwd.patch
bio.c: make bio_destructor static
devpts-inodec-make-one-struct-static-fwd.patch
devpts/inode.c: make one struct static
small-proc_fs-cleanups-fwd.patch
small proc_fs cleanups
kernel-timerc-comment-typo.patch
Fix kernel/timer.c comment typo
mark-qnx4fs_rw-as-broken-fwd.patch
mark QNX4FS_RW as BROKEN
oss-remove-unused-functions-fwd.patch
OSS: remove unused functions
dvb-av7110_hwc-remove-unused-functions-fwd.patch
DVB av7110_hw.c: remove unused functions
schedc-remove-an-unused-macro-fwd.patch
sched.c: remove an unused macro
scsi-ahcic-remove-an-unused-function-fwd.patch
scsi/ahci.c: remove an unused function
scsi-aic7xxx-aic79xx_osmc-remove-an-unused-function-fwd.patch
scsi/aic7xxx/aic79xx_osm.c: remove an unused function
schedc-remove-an-unused-function-fwd.patch
sched.c: remove an unused function
prism54-small-prismcompat-cleanup-fwd.patch
prism54: small prismcompat cleanup
some-parport_pcc-cleanups-fwd.patch
some parport_pc.c cleanups
fix-typo-and-email-in-saktxt.patch
fix typo and email in SAK.txt
cris-remove-kernel-20-ifdefs-fwd.patch
cris: remove kernel 2.0 #ifdef's
afs-afs_voltypes-isnt-always-required-fwd.patch
AFS: afs_voltypes isn't always required
befs-if-0-two-unused-global-functions-fwd.patch
befs: #if 0 two unused global functions
binfmt_scriptc-make-em86_format-static.patch
binfmt_script.c: make em86_format static
remove-unused-include-asm-m68k-adb_mouseh.patch
remove unused include/asm-m68k/adb_mouse.h
scsi-aic7xxx-remove-two-useless-variables.patch
scsi/aic7xxx/: remove two useless variables
remove-in_string_c.patch
remove IN_STRING_C
remove-ct_to_secs-ct_to_usecs.patch
remove CT_TO_SECS()/CT_TO_USECS()
bttv-driverc-make-some-variables-static.patch
bttv-driver.c: make some variables static
arch-alpha-kconfig-kill-stale-reference-to-documentation-smptex.patch
arch/alpha/Kconfig: Kill stale reference to Documentation/smp.tex
init-initramfsc-make-unpack_to_rootfs-static.patch
init/initramfs.c: make unpack_to_rootfs static
oss-misc-cleanups.patch
OSS: misc cleanups
inux-269-fs-proc-basec-array-size.patch
fs/proc/base.c: array size
linux-269-fs-proc-proc_ttyc-avoid-array.patch
fs/proc/proc_tty.c: avoid array
optimize-prefetch-usage-in-list_for_each_xxx.patch
optimize prefetch() usage in list_for_each_xxx
signalc-convert-assertion-to-bug_on.patch
signal.c: convert assertion to BUG_ON()
right-severity-level-for-fatal-message.patch
Right severity level for fatal message
remove-unused-drivers-char-rio-cdprotoh.patch
remove unused drivers/char/rio/cdproto.h
remove-unused-drivers-char-rsf16fmih.patch
remove unused drivers/char/rsf16fmi.h
mtd-added-nec-upd29f064115-support.patch
mtd: added NEC uPD29F064115 support
waiting-10s-before-mounting-root-filesystem.patch
retry mounting the root filesystem at boot time
Re: 2.6.10-mm1
Quoted 2 lines
add-page-becoming-writable-notification.patch
Add page becoming writable notification
David, this still has the bogus address_space operation in addition to the vm_operation. page_mkwrite only fits into the vm_operations scheme, so please remove the address_space op. Also the code will be smaller and faster witout that indirection..
Re: 2.6.10-mm1
Quoted 7 lines · Christoph Hellwig
Quoted 2 lines
add-page-becoming-writable-notification.patch
Add page becoming writable notificationDavid, this still has the bogus
address_spaceoperation in addition to thevm_operation.page_mkwriteonly fits into thevm_operationsscheme, so please remove theaddress_spaceop. Also the code will be smaller and faster witout that indirection..
And apparently it's broken on NUMA. I couldn't find generic_file_get/set_policy in my tree, which builds with CONFIG_NUMA enabled.
Jesse
mm/filemap.c +0 -4
@@ -1542,10 +1542,6 @@ struct vm_operations_struct generic_file .nopage = filemap_nopage, .populate = filemap_populate, .page_mkwrite = filemap_page_mkwrite, -#ifdef CONFIG_NUMA - .set_policy = generic_file_set_policy, - .get_policy = generic_file_get_policy, -#endif };/* This is used for a general mmap of a disk file */
Re: 2.6.10-mm1 [failure on AMD64]
Quoted 4 lines · Jesse Barnes
Quoted 3 lines · Christoph Hellwig
Quoted 2 lines
add-page-becoming-writable-notification.patch
Add page becoming writable notification
Quoted 8 lines
Quoted 4 lines
David, this still has the bogus
address_spaceoperation in addition to thevm_operation.page_mkwriteonly fits into thevm_operationsscheme, so please remove theaddress_spaceop. Also the code will be smaller and faster witout that indirection..And apparently it's broken on NUMA. I couldn't find generic_file_get/set_policy in my tree, which builds with
CONFIG_NUMAenabled.
On a dual-Opteron w/ NUMA I had to apply the Jesse's patch to compile the kernel, but it does not boot. It only prints this to the serial console:
Bootdata ok (command line is root=/dev/sdb3 vga=792 earlyprintk=ttyS0,57600 console=ttyS0,57600 console=tty0)
Linux version 2.6.10-mm1 (rafael@chimera) (gcc version 3.3.4 (pre 3.3.5 20040809)) #1 SMP Mon Jan 3 23:09:30 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
kernel direct mapping tables upto ffff810100000000 @ 8000-c000 Scanning NUMA topology in Northbridge 24
Number of nodes 2 (10010)
Node 0 already present. Skipping
Node 1 already present. Skipping
No NUMA configuration found
Faking a node at 0000000000000000-000000003fff0000
Bootmem setup node 0 0000000000000000-000000003fff0000
No mptable found.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfc9fe000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 17, address 0xfc9fe000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfc9ff000] gsi_base[28]) IOAPIC[2]: apic_id 4, version 17, address 0xfc9ff000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @ f0000000 size 128 MB
CPU 1: aperture @ f0000000 size 128 MB
and then it goes into an infinite loop that writes some garbage to the framebuffer (yellow lines on top of the screen).
On a UP AMD64 it boots, but then it does not work appropriately (eg. at KDE startup the box hangs for a while and I get the message like "The process for the file protocol has terminated unexpectedly" and desktop icons are not displayed, and I get a "cpu overload" message from arts etc.).
Please let me know if you need more information.
Greets,
RJW
Signature · 3 lines
- Would you tell me, please, which way I ought to go from here? - That depends a good deal on where you want to get to. -- Lewis Carroll "Alice's Adventures in Wonderland"
Re: 2.6.10-mm1 [failure on AMD64]
Quoted 44 lines · Rafael J. Wysocki
On a dual-Opteron w/ NUMA I had to apply the Jesse's patch to compile the kernel, but it does not boot. It only prints this to the serial console:
Bootdata ok (command line is root=/dev/sdb3 vga=792 earlyprintk=ttyS0,57600 console=ttyS0,57600 console=tty0)
Linux version 2.6.10-mm1 (rafael@chimera) (gcc version 3.3.4 (pre 3.3.5 20040809)) #1 SMP Mon Jan 3 23:09:30 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 -000000000009fc00(usable)
BIOS-e820:000000000009fc00-00000000000a0000(reserved)
BIOS-e820:00000000000e0000- 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 -000000003fff0000(usable)
BIOS-e820:000000003fff0000-000000003ffff000(ACPI data)
BIOS-e820:000000003ffff000- 0000000040000000 (ACPI NVS)
BIOS-e820:00000000ff7c0000- 0000000100000000 (reserved)
kernel direct mapping tables uptoffff810100000000@ 8000-c000 Scanning NUMA topology in Northbridge 24
Number of nodes 2 (10010)
Node 0 already present. Skipping
Node 1 already present. Skipping
No NUMA configuration found
Faking a node at 0000000000000000-000000003fff0000
Bootmem setup node 0 0000000000000000-000000003fff0000
No mptable found.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]:apic_id2, version 17, address0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfc9fe000] gsi_base[24]) IOAPIC[1]:apic_id3, version 17, address0xfc9fe000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfc9ff000] gsi_base[28]) IOAPIC[2]:apic_id4, version 17, address0xfc9ff000, GSI 28-31
ACPI:INT_SRC_OVR(bus 0bus_irq0global_irq2 dfl dfl) Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @f0000000size 128 MB
CPU 1: aperture @f0000000size 128 MBand then it goes into an infinite loop that writes some garbage to the framebuffer (yellow lines on top of the screen).
Quoted 6 lines
On a UP AMD64 it boots, but then it does not work appropriately (eg. at KDE startup the box hangs for a while and I get the message like "The process for the file protocol has terminated unexpectedly" and desktop icons are not displayed, and I get a "cpu overload" message from arts etc.).
Please let me know if you need more information.
Try wli's patch, subject "[bootfix] pass used_node_mask by reference in 2.6.10-mm1".
Jesse
Re: 2.6.10-mm1 [failure on AMD64]
In reply to Rafael J. WysockiQuoted 4 lines · Rafael J. Wysocki
On a UP AMD64 it boots, but then it does not work appropriately (eg. at KDE startup the box hangs for a while and I get the message like "The process for the file protocol has terminated unexpectedly" and desktop icons are not displayed, and I get a "cpu overload" message from arts etc.).
I also tried it on an AMD64 system (3500+ on A8V Deluxe) and did not observe any anomalies, but I am using Gnome, not KDE.
I saw a message that latency tests were wanted, but I don't normally have a workload in which this can be observed. Perhaps someone could provide a suggestion? I did try some dvd-burning sessions. Subjectively speaking, there didn't seem to be any improvement over 2.6.10, and it may have been a bit worse.
Re: 2.6.10-mm1 [failure on AMD64]
Quoted 3 lines · Thomas Molina
Quoted 1 line · Rafael J. Wysocki
On a UP AMD64 it boots, but then it does not work appropriately (eg. at
KDE
Quoted 1 line
Quoted 1 line
startup the box hangs for a while and I get the message like "The process
for
Quoted 5 lines
Quoted 2 lines
the file protocol has terminated unexpectedly" and desktop icons are not displayed, and I get a "cpu overload" message from arts etc.).
I also tried it on an AMD64 system (3500+ on A8V Deluxe) and did not observe any anomalies, but I am using Gnome, not KDE.
Now I'm not seeing anything wrong either, so it must have been accidental. I suspect that the problem was with artsd.
Greets,
RJW
Signature · 3 lines
- Would you tell me, please, which way I ought to go from here? - That depends a good deal on where you want to get to. -- Lewis Carroll "Alice's Adventures in Wonderland"
Re: 2.6.10-mm1 [failure on AMD64]
In reply to Rafael J. WysockiQuoted 10 lines · Rafael J. Wysocki
Quoted 9 lines · Jesse Barnes
Quoted 7 lines · Christoph Hellwig
Quoted 2 lines
add-page-becoming-writable-notification.patch
Add page becoming writable notificationDavid, this still has the bogus
address_spaceoperation in addition to thevm_operation.page_mkwriteonly fits into thevm_operationsscheme, so please remove theaddress_spaceop. Also the code will be smaller and faster witout that indirection..
Quoted 6 lines
Quoted 3 lines
And apparently it's broken on NUMA. I couldn't find generic_file_get/set_policy in my tree, which builds with
CONFIG_NUMAenabled.On a dual-Opteron w/ NUMA I had to apply the Jesse's patch to compile the kernel, but it does not boot. It only prints this to the serial console:
I suspect it is fixed by Bill Irwin's patch from the "[bootfix] pass used_node_mask by reference .." thread. Can you test that?
-Andi
Re: 2.6.10-mm1 [failure on AMD64]
Quoted 9 lines · Andi Kleen
Quoted 7 lines · Rafael J. Wysocki
Quoted 6 lines · Jesse Barnes
Quoted 5 lines · Christoph Hellwig
Quoted 2 lines
add-page-becoming-writable-notification.patch
Add page becoming writable notificationDavid, this still has the bogus
address_spaceoperation in addition to thevm_operation.page_mkwriteonly fits into thevm_operations
scheme,
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Quoted 2 lines
so please remove the
address_spaceop. Also the code will be smaller and faster witout that indirection..And apparently it's broken on NUMA. I couldn't find generic_file_get/set_policy in my tree, which builds with
CONFIG_NUMAenabled.
Quoted 5 lines
Quoted 2 lines
On a dual-Opteron w/ NUMA I had to apply the Jesse's patch to compile the kernel, but it does not boot. It only prints this to the serial console:
I suspect it is fixed by Bill Irwin's patch from the "[bootfix] pass
used_node_maskby reference .." thread. Can you test that?
Sure. It fixes the problem.
Greets,
RJW
Signature · 3 lines
- Would you tell me, please, which way I ought to go from here? - That depends a good deal on where you want to get to. -- Lewis Carroll "Alice's Adventures in Wonderland"
Re: 2.6.10-mm1
In reply to Christoph HellwigQuoted 7 lines · Christoph Hellwig
Quoted 2 lines
add-page-becoming-writable-notification.patch
Add page becoming writable notificationDavid, this still has the bogus
address_spaceoperation in addition to thevm_operation.page_mkwriteonly fits into thevm_operationsscheme, so please remove theaddress_spaceop. Also the code will be smaller and faster witout that indirection..
Here's the fix:
fs/afs/file.c +17 -3
@@ -33,8 +33,10 @@ static int afs_file_releasepage(struct pstatic ssize_t afs_file_write (struct file *file,const char __user *buf,size_t size,loff_t *off); +static int afs_file_mmap (struct file * file,struct vm_area_struct * vma); +#ifdef CONFIG_AFS_FSCACHE -static int afs_file_page_mkwrite (struct page *page); +static int afs_file_page_mkwrite (struct vm_area_struct *vma,struct page *page);#endif struct inode_operations afs_file_inode_operations = {
@@ -44,7 +46,7 @@ struct inode_operations afs_file_inode_ostruct file_operations afs_file_file_operations = { .read = generic_file_read, .write = afs_file_write, - .mmap = generic_file_mmap, + .mmap = afs_file_mmap, #if 0 .open = afs_file_open, .release = afs_file_release,
@@ -58,6 +60,11 @@ struct address_space_operations afs_fs_a .set_page_dirty = __set_page_dirty_nobuffers, .releasepage = afs_file_releasepage, .invalidatepage = afs_file_invalidatepage, +}; + +struct vm_operations_struct afs_fs_vm_operations = { + .nopage = filemap_nopage, + .populate = filemap_populate, #ifdef CONFIG_AFS_FSCACHE .page_mkwrite = afs_file_page_mkwrite, #endif
@@ -79,6 +86,13 @@ static ssize_t afs_file_write(struct filreturn -EIO ; }/* end afs_file_write() */ +static int afs_file_mmap (struct file * file,struct vm_area_struct * vma) +{ +file_accessed (file); + vma->vm_ops = &afs_fs_vm_operations; +return 0 ; +} +/*****************************************************************************/ /* * deal with notification that a page was read from the cache
@@ -321,7 +335,7 @@ static int afs_file_releasepage(struct p* wait for the disc cache to finish writing before permitting */ #ifdef CONFIG_AFS_FSCACHE -static int afs_file_page_mkwrite (struct page *page) +static int afs_file_page_mkwrite (struct vm_area_struct *vma,struct page *page) {wait_on_page_fs_misc (page);return 0 ;
include/linux/fs.h +0 -3
@@ -330,9 +330,6 @@ struct address_space_operations {int (*releasepage) (struct page *,int );ssize_t (*direct_IO)(int ,struct kiocb *,const struct iovec *iov,loff_t offset,unsigned long nr_segs); - -/* notification that a page is about to become writable */ -int (*page_mkwrite)(struct page *page); };struct backing_dev_info ;
include/linux/mm.h +4 -1
@@ -762,7 +762,10 @@ extern void truncate_inode_pages_range(s loff_t lstart, loff_t lend);/* generic vm_area_ops exported for stackable file systems */ -struct page *filemap_nopage (struct vm_area_struct *,unsigned long ,int *); +extern struct page *filemap_nopage (struct vm_area_struct *, +unsigned long ,int *); +extern int filemap_populate (struct vm_area_struct *,unsigned long , +unsigned long ,pgprot_t ,unsigned long ,int );/* mm/page-writeback.c */ int write_one_page (struct page *page,int wait);
mm/filemap.c +3 -19
@@ -1477,7 +1477,7 @@ err:return NULL ; } -static int filemap_populate(struct vm_area_struct *vma, +int filemap_populate(struct vm_area_struct *vma, unsigned long addr, unsigned long len, pgprot_t prot,
@@ -1524,26 +1524,13 @@ repeat:return 0 ; } - -/* -* pass notification that a page is becoming writable up to the filesystem -*/ -static int filemap_page_mkwrite (struct vm_area_struct *vma,struct page *page) -{ -return page->mapping->a_ops->page_mkwrite (page); -} +EXPORT_SYMBOL (filemap_populate);struct vm_operations_struct generic_file_vm_ops = { .nopage = filemap_nopage, .populate = filemap_populate, }; -struct vm_operations_struct generic_file_vm_mkwr_ops = { - .nopage = filemap_nopage, - .populate = filemap_populate, - .page_mkwrite = filemap_page_mkwrite, -}; -/* This is used for a general mmap of a disk file */ int generic_file_mmap (struct file * file,struct vm_area_struct * vma)
@@ -1553,10 +1540,7 @@ int generic_file_mmap(struct file * fileif (!mapping->a_ops->readpage)return -ENOEXEC ;file_accessed (file); -if (!mapping->a_ops->page_mkwrite) - vma->vm_ops = &generic_file_vm_ops; -else - vma->vm_ops = &generic_file_vm_mkwr_ops; + vma->vm_ops = &generic_file_vm_ops;return 0 ; }
David Howells
maintainerRe: 2.6.10-mm1
Quoted 9 lines · Christoph Hellwig
Quoted 7 lines
Quoted 2 lines
add-page-becoming-writable-notification.patch
Add page becoming writable notificationDavid, this still has the bogus
address_spaceoperation in addition to thevm_operation.page_mkwriteonly fits into thevm_operationsscheme, so please remove theaddress_spaceop. Also the code will be smaller and faster witout that indirection..Here's the fix:
That's not right either. Filesystems really shouldn't be overloading the vm_ops on memory mappings (as has been made clear to me) and the VM low-level paging routines shouldn't be touching a_ops (as has also been made clear to me). I also have other reasons I don't want to have ordinary files with specialised vm_ops.
I suppose I could try and build a little knowledge about fscache into the VM... that might be reasonable.
Remember also that your change is going to affect NFS too eventually, assuming NFS caching support ends up being done this way. It may also affect other filesystems, such as SMB/CIFS and Coda eventually should they partake of fscache services too.
David
Re: 2.6.10-mm1
Quoted 2 lines · David Howells
That's not right either. Filesystems really shouldn't be overloading the
vm_opson memory mappings (as has been made clear to me)
yes, they should. And various filesystems do.
Re: 2.6.10-mm1
In reply to Andrew MortonReview
Quoted 5 lines
(quoted diff) +1
-2-ioctl-cleanup.patch -unlocked_ioctl.patch +ioctl-rework.patch New version of the dont-hold-BKL-across-ioctl patch.
For the native case the new naming is stupid. The old ioctl_unlocked made perfect sense while ioctl_native doesn't - after all ->ioctl is native aswell. Also this still has the useless inode * paramater in the method signature.
Re: 2.6.10-mm1
Quoted 10 lines · Christoph Hellwig
Review
Quoted 5 lines
(quoted diff) +1
-2-ioctl-cleanup.patch -unlocked_ioctl.patch +ioctl-rework.patch New version of the dont-hold-BKL-across-ioctl patch.For the native case the new naming is stupid. The old
ioctl_unlockedmade perfect sense whileioctl_nativedoesn't - after all ->ioctl is native aswell. Also this still has the useless inode * paramater in the method signature.
Here's a better and much simpler patch:
- add ->unlocked_ioctl method and a do_ioctl wrapper in ioctl.c so all places calling ->ioctl get it.
- add ->compat_ioctl method and call it in compat_sys_ioctl before doing the hash lookup for registered handlers.
- streamline compat_sys_ioctl and move the complex error reporting into a function of it's own
Documentation/filesystems/Locking +7 -0
@@ -350,6 +350,8 @@ unsigned int (*poll) (struct file *, struct poll_table_struct *); int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long); + long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); + long (*compat_ioctl) (struct file *, unsigned int, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); int (*open) (struct inode *, struct file *); int (*flush) (struct file *);
@@ -383,6 +385,8 @@ readdir: no poll: no ioctl: yes (see below) +unlocked_ioctl: no (see below) +compat_ioctl: no mmap: no open: maybe (see below) flush: no
@@ -427,6 +431,9 @@ ->ioctl() or kill the latter completely. One of the problems is that for anything that resembles union-mount we won't have a struct file for all components. And there are other reasons why the current interface is a mess... + +->ioctl() on regular files is superceded by the ->unlocked_ioctl() that +doesn't take the BKL. ->read on directories probably must go away - we should just enforce -EISDIR in sys_read() and friends.
fs/compat.c +65 -55
142 lines not on this page · raw message
fs/ioctl.c +39 -17
103 lines not on this page · raw message
include/linux/fs.h +4 -2
@@ -902,8 +902,8 @@/* * NOTE: -* read, write, poll, fsync, readv, writev can be called -* without the big kernel lock held in all filesystems. +* read, write, poll, fsync, readv, writev, unlocked_ioctl and compat_ioctl +* can be called without the big kernel lock held in all filesystems. */ struct file_operations {struct module *owner;
@@ -915,6 +915,8 @@int (*readdir) (struct file *,void *,filldir_t );unsigned int (*poll) (struct file *,struct poll_table_struct *);int (*ioctl) (struct inode *,struct file *,unsigned int ,unsigned long ); +long (*unlocked_ioctl) (struct file *,unsigned int ,unsigned long ); +long (*compat_ioctl) (struct file *,unsigned int ,unsigned long );int (*mmap) (struct file *,struct vm_area_struct *);int (*open) (struct inode *,struct file *);int (*flush) (struct file *);
Re: 2.6.10-mm1
In reply to Christoph HellwigHello!
Quoting r. Christoph Hellwig ([email protected]) "Re: 2.6.10-mm1":
Quoted 10 lines
Review
Quoted 5 lines
(quoted diff) +1
-2-ioctl-cleanup.patch -unlocked_ioctl.patch +ioctl-rework.patch New version of the dont-hold-BKL-across-ioctl patch.For the native case the new naming is stupid. The old
ioctl_unlockedmade perfect sense whileioctl_nativedoesn't - after all ->ioctl is native aswell. Also this still has the useless inode * paramater in the method signature.
Regarding the inode* parameter, the change to remove it would be trivial, though I personally dont care and I didnt see anyone else comment on that. Anyone?
MST
Re: 2.6.10-mm1
In reply to Andrew MortonQuoted 1 line
reiser4-export-inode_lock.patch
Han,s how'as the work progressing on removing these and other fishy core changes?
Quoted 1 line
reiser4-unstatic-kswapd.patch
Andrew, could you please finally drop this one? It's not needed for reiser4 operation at all just for some of their stranger debugging features.
Quoted 2 lines
reiser4-include-reiser4.patch
What about moving fs/Kconfig.reiser4 to fs/reiser4/Kconfig? This is the logical place for it and makes dropping in a new version of the fs easier.
Quoted 1 line
reiser4-only.patch
Documentation shouldn't be in fs/FOO/doc but Documentation/filesystems/.
Re: 2.6.10-mm1
Quoted 8 lines · Christoph Hellwig
Quoted 3 lines
reiser4-export-inode_lock.patch
Han,s how'as the work progressing on removing these and other fishy core changes?
Vladimir is writing code to reduce the number of patches needed. This code is causing bugs that have not yet been fixed. His email is not working today, hopefully it will work tomorrow. This is the russian holiday season....
Quoted 11 lines
Quoted 5 lines
reiser4-unstatic-kswapd.patch
Andrew, could you please finally drop this one? It's not needed for reiser4 operation at all just for some of their stranger debugging features.
I'll let vs comment.
Quoted 12 lines
Quoted 6 lines
reiser4-include-reiser4.patch
What about moving
fs/Kconfig.reiser4tofs/reiser4/Kconfig? This is the logical place for it and makes dropping in a new version of the fs easier.
Ok.
Quoted 9 lines
Quoted 5 lines
reiser4-only.patch
Documentation shouldn't be in
fs/FOO/docbutDocumentation/filesystems/.
Ok.
Quoted 9 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
What are the other ones you object to?
Re: 2.6.10-mm1
Hello
Quoted 9 lines · Hans Reiser
Quoted 7 lines · Christoph Hellwig
Quoted 3 lines
reiser4-export-inode_lock.patch
Han,s how'as the work progressing on removing these and other fishy core changes?
The work is in progress. Here is list of patches.
reiser4-sb_sync_inodes.patch reiser4-allow-drop_inode-implementation.patch - will either try to do what Christoph suggested or find something else reiser4-truncate_inode_pages_range.patch reiser4-export-remove_from_page_cache.patch reiser4-export-page_cache_readahead.patch reiser4-reget-page-mapping.patch
reiser4-rcu-barrier.patch
reiser4-export-inode_lock.patch - trying to change to go
without this
reiser4-export-pagevec-funcs.patch reiser4-export-radix_tree_preload.patch reiser4-export-find_get_pages.patch
reiser4-radix-tree-tag.patch - not needed anymore
reiser4-radix_tree_lookup_slot.patch reiser4-perthread-pages.patch
reiser4-unstatic-kswapd.patch - not needed anymore
reiser4-include-reiser4.patch
reiser4-doc.patch
Christoph, what else do you especially object against?
Quoted 60 lines
Quoted 1 line
Vladimir is writing code to reduce the number of patches needed. This code is causing bugs that have not yet been fixed. His email is not working today, hopefully it will work tomorrow. This is the russian holiday season....
Quoted 11 lines
Quoted 5 lines
reiser4-unstatic-kswapd.patch
Andrew, could you please finally drop this one? It's not needed for reiser4 operation at all just for some of their stranger debugging features.
I'll let vs comment.
Quoted 12 lines
Quoted 6 lines
reiser4-include-reiser4.patch
What about moving
fs/Kconfig.reiser4tofs/reiser4/Kconfig? This is the logical place for it and makes dropping in a new version of the fs easier.Ok.
Quoted 9 lines
Quoted 5 lines
reiser4-only.patch
Documentation shouldn't be in
fs/FOO/docbutDocumentation/filesystems/.Ok.
Quoted 9 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/What are the other ones you object to?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: 2.6.10-mm1
Quoted 3 lines · Vladimir Saveliev
The work is in progress. Here is list of patches.
reiser4-perthread-pages.patch
this one I don't particularly object, but I'm not sure it's really the right thing to do. Can you post it with a detailed description to linux-mm so we can kick off discussion?
The other thing I'm totally oposed to was the per-sb kobject patch, but I can't find that in current -mm anymore.
RFC 1/1 per thread page reservation patch
Hello
Quoted 7 lines · Christoph Hellwig
Quoted 2 lines
reiser4-perthread-pages.patch
this one I don't particularly object, but I'm not sure it's really the right thing to do. Can you post it with a detailed description to linux-mm so we can kick off discussion?
This patch adds an API to reserve some number of pages for exclusive use of calling thread. This is necessary to support operations that cannot tolerate memory allocation failures in the middle (reiser4 uses this API to not have to undo complex uncompleted (due to ENOMEM) filesystem tree modifications).
Implementation is simple: reserved pages are stored in a list hanging off calling task_struct. Caller is to manually release unused pages.
This API is supposed to be used for small reservation (no more than few dozens of pages).
Looking forward for advices on how to do that better/properly Thanks
This patch adds an API to reserve some number of pages for exclusive use of calling thread. This is necessary to support operations that cannot tolerate memory allocation failures in the middle. Implementation is very simplistic and would only work efficiently for small reservations (no more than few dozens of pages).
Reserved pages are stored in a list hanging off calling task_struct. This list is only accessed by the current thread, hence, no locking is required. Note that this makes use of reservation from interrupt handlers impossible without some external synchronization. Caller is responsible for manually releasing unused pages by calling perthread_pages_release(int nrpages) with proper argument.
---
diff -puN include/linux/gfp.h~reiser4-perthread-pages include/linux/gfp.h
include/linux/gfp.h | 4 + include/linux/init_task.h | 4 - include/linux/sched.h | 3 + kernel/fork.c | 4 + mm/page_alloc.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 110 insertions(+), 2 deletions(-)
include/linux/gfp.h renamed from include/linux/gfp.h~reiser4-perthread-pages +4 -0
@@ -134,4 +134,8 @@ extern void FASTCALL(free_cold_page(struvoid page_alloc_init (void ); +int perthread_pages_reserve (int nrpages,int gfp); +void perthread_pages_release (int nrpages); +int perthread_pages_count (void ); +#endif /* __LINUX_GFP_H */
include/linux/init_task.h renamed from include/linux/init_task.h~reiser4-perthread-pages +2 -2
@@ -112,8 +112,8 @@ extern struct group_info init_groups; .proc_lock = SPIN_LOCK_UNLOCKED, \ .switch_lock = SPIN_LOCK_UNLOCKED, \ .journal_info = NULL, \ + .private_pages = LIST_HEAD_INIT(tsk.private_pages), \ + .private_pages_count = 0, \ } - -#endif
include/linux/sched.h renamed from include/linux/sched.h~reiser4-perthread-pages +3 -0
@@ -691,6 +691,9 @@ struct task_struct {nodemask_t mems_allowed;int cpuset_mems_generation;#endif + +struct list_head private_pages;/* per-process private pages */ +int private_pages_count; };static inline pid_t process_group (struct task_struct *tsk)
kernel/fork.c renamed from kernel/fork.c~reiser4-perthread-pages +4 -0
@@ -154,6 +154,10 @@ static struct task_struct *dup_task_stru tsk->thread_info = ti; ti->task = tsk; +/* initialize list of pages privately reserved by process */ +INIT_LIST_HEAD (&tsk->private_pages); + tsk->private_pages_count =0 ; +/* One for us, one for whoever does the "release_task()" (usually parent) */ atomic_set (&tsk->usage,2 );return tsk;
mm/page_alloc.c renamed from mm/page_alloc.c~reiser4-perthread-pages +97 -0
109 lines not on this page · raw message
_
Re: [RFC] per thread page reservation patch
Quoted 11 lines · Vladimir Saveliev
+int
perthread_pages_reserve(int nrpages, int gfp)
+{
+ int i;
+ structlist_headaccumulator;
+ structlist_head*per_thread;
+
+per_thread=get_per_thread_pages();
+INIT_LIST_HEAD(&accumulator);
+list_splice_init(per_thread, &accumulator);
+ for (i = 0; i < nrpages; ++i) {
This will end up reserving more pages than were asked for, if current->private_pages_count is non-zero. Deliberate? --
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Quoted 13 lines · Andrew Morton
Quoted 11 lines · Vladimir Saveliev
+int
perthread_pages_reserve(int nrpages, int gfp)
+{
+ int i;
+ structlist_headaccumulator;
+ structlist_head*per_thread;
+
+per_thread=get_per_thread_pages();
+INIT_LIST_HEAD(&accumulator);
+list_splice_init(per_thread, &accumulator);
+ for (i = 0; i < nrpages; ++i) {
Quoted 2 lines
This will end up reserving more pages than were asked for, if
current->private_pages_countis non-zero. Deliberate?
Yes. This is to make modular usage possible, so that
perthread_pages_reserve(nrpages, gfp_mask);
/* call some other code... */
perthread_pages_release(unused_pages);works correctly if "some other code" does per-thread reservations too.
Nikita.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
In reply to Vladimir SavelievQuoted 57 lines
diff -puN
include/linux/gfp.h~reiser4-perthread-pagesinclude/linux/gfp.hinclude/linux/gfp.h renamed from include/linux/gfp.h~reiser4-perthread-pages +4
-0@@ -134,4 +134,8 @@ extern void FASTCALL(free_cold_page(struvoid page_alloc_init (void ); +int perthread_pages_reserve (int nrpages,int gfp); +void perthread_pages_release (int nrpages); +int perthread_pages_count (void ); +#endif /* __LINUX_GFP_H */ diff -puN
include/linux/init_task.h~reiser4-perthread-pagesinclude/linux/init_task.hinclude/linux/init_task.h renamed from include/linux/init_task.h~reiser4-perthread-pages +2
-2@@ -112,8 +112,8 @@ extern struct group_info init_groups; .proc_lock = SPIN_LOCK_UNLOCKED, \ .switch_lock = SPIN_LOCK_UNLOCKED, \ .journal_info = NULL, \ + .private_pages = LIST_HEAD_INIT(tsk.private_pages), \ + .private_pages_count = 0, \ } - -#endif diff -puN
include/linux/sched.h~reiser4-perthread-pagesinclude/linux/sched.hinclude/linux/sched.h renamed from include/linux/sched.h~reiser4-perthread-pages +3
-0@@ -691,6 +691,9 @@ struct task_struct {nodemask_t mems_allowed;int cpuset_mems_generation;#endif + +struct list_head private_pages;/* per-process private pages */ +int private_pages_count; };static inline pid_t process_group (struct task_struct *tsk)diff -puN
kernel/fork.c~reiser4-perthread-pageskernel/fork.ckernel/fork.c renamed from kernel/fork.c~reiser4-perthread-pages +4
-0@@ -154,6 +154,10 @@ static struct task_struct *dup_task_stru tsk->thread_info = ti; ti->task = tsk; +/* initialize list of pages privately reserved by process */ +INIT_LIST_HEAD (&tsk->private_pages); + tsk->private_pages_count =0 ; +/* One for us, one for whoever does the "release_task()" (usually parent) */ atomic_set (&tsk->usage,2 );return tsk;diff -puN
mm/page_alloc.c~reiser4-perthread-pagesmm/page_alloc.c
mm/page_alloc.c void fastcall free_cold_page(struct page · line 557
Quoted 7 lines
mm/page_alloc.c renamed from mm/page_alloc.c~reiser4-perthread-pages +4
-0@@ -551,6 +551,97 @@ void fastcall free_cold_page(struct pagefree_hot_cold_page (page,1 ); } +static inline struct list_head *get_per_thread_pages (void ) +{ +return ¤t->private_pages; +}
this is a completely useless wrapper that doesn't buy anything.
mm/page_alloc.c void fastcall free_cold_page(struct page · line 567
Quoted 9 lines
mm/page_alloc.c renamed from mm/page_alloc.c~reiser4-perthread-pages +9
-0+int perthread_pages_reserve (int nrpages,int gfp) +{ +int i; +struct list_head accumulator; +struct list_head *per_thread; + + per_thread =get_per_thread_pages (); +INIT_LIST_HEAD (&accumulator); +list_splice_init (per_thread, &accumulator);
Can probably be written much simpler as:
int perthread_pages_reserve(int nrpages, int gfp)
{
LIST_HEAD(accumulator);
int i;
list_splice_init(¤t->private_pages, &accumulator);Now the big question is, what's synchronizing access to current->private_pages?
Quoted 5 lines
mm/page_alloc.c renamed from mm/page_alloc.c~reiser4-perthread-pages +5
-0+for (i =0 ; i < nrpages; ++i) { +struct page *page; + + page =alloc_page (gfp); +if (page !=NULL )
mm/page_alloc.c void fastcall free_cold_page(struct page · line 582
Quoted 10 lines
mm/page_alloc.c renamed from mm/page_alloc.c~reiser4-perthread-pages +10
-0+list_add (&page->lru, &accumulator); + else { +for (; i >0 ; --i) { + page = list_entry(accumulator.next, struct page, lru); +list_del (&page->lru); +page_cache_release (page); + } +return -ENOMEM ; + } + }
Would be much more readable with the error condition handling at the end of the function and a goto.
mm/page_alloc.c void fastcall free_cold_page(struct page · line 618
Quoted 5 lines
mm/page_alloc.c renamed from mm/page_alloc.c~reiser4-perthread-pages +5
-0+int perthread_pages_count (void ) +{ +return current->private_pages_count; +} +EXPORT_SYMBOL (perthread_pages_count);
Again a completely useless wrapper.
Quoted 14 lines
mm/page_alloc.c renamed from mm/page_alloc.c~reiser4-perthread-pages +14
-0+static inline struct page * +perthread_pages_alloc (void ) +{ +struct list_head *perthread_pages; + +/* +* try to allocate pages from the per-thread private_pages pool. No +* locking is needed: this list can only be modified by the thread +* itself, and not by interrupts or other threads. +*/ + perthread_pages =get_per_thread_pages (); +if (!in_interrupt () && !list_empty (perthread_pages)) { +struct page *page; +
mm/page_alloc.c void fastcall free_cold_page(struct page · line 643
Quoted 10 lines
mm/page_alloc.c renamed from mm/page_alloc.c~reiser4-perthread-pages +10
-0+ page = list_entry(perthread_pages->next, struct page, lru); +list_del (&page->lru); + current->private_pages_count--; +/* +* per-thread page is already initialized, just return it. +*/ +return page; + }else +return NULL ; +}
Would be written much cleaner with a single return statement and the comment above the function, ala:
/*
* try to allocate pages from the per-thread private_pages pool. No
* locking is needed: this list can only be modified by the thread
* itself, and not by interrupts or other threads.
*/
static inline struct page *perthread_pages_alloc(void)
{
struct list_head *perthread_pages = ¤t->private_pages;
struct page *page = NULL;
if (!in_interrupt() && !list_empty(perthread_pages)) {
page = list_entry(perthread_pages->next, struct page, lru);
list_del(&page->lru);
current->private_pages_count--;
}
return page;
}mm/page_alloc.c __alloc_pages(unsigned int gfp_mask, uns · line 766
Quoted 6 lines
mm/page_alloc.c renamed from mm/page_alloc.c~reiser4-perthread-pages +6
-0+if (order ==0 ) { + page =perthread_pages_alloc (); +if (page !=NULL ) +return page; + } +
You should at least move the !in_interrupt() condition out here.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Quoted 2 lines
Now the big question is, what's synchronizing access to
current->private_pages?
Umm, it's obviously correct as we're thread-local. Objection taken back :)
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
In reply to Christoph HellwigQuoted 9 lines · Christoph Hellwig
int
perthread_pages_reserve(int nrpages, int gfp){ LIST_HEAD(accumulator); int i; list_splice_init(¤t->private_pages, &accumulator);Now the big question is, what's synchronizing access to
current->private_pages?
Safe without locks so long as there is no other way to get at another process's private_pages. ;)
Best,
Robert Love
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
In reply to Christoph HellwigQuoted 2 lines · Christoph Hellwig
Quoted 2 lines
diff -puN
include/linux/gfp.h~reiser4-perthread-pagesinclude/linux/gfp.h
--- linux-2.6.10-rc3/include/linux/gfp.h~reiser4-perthread-pages 2004-12-22 20:09:44.153164276 +0300
[...]
Quoted 8 lines
mm/page_alloc.c void fastcall free_cold_page(struct page · line 618
Quoted 6 lines
mm/page_alloc.c renamed from mm/page_alloc.c~reiser4-perthread-pages +5
-0+int perthread_pages_count (void ) +{ +return current->private_pages_count; +} +EXPORT_SYMBOL (perthread_pages_count);Again a completely useless wrapper.
I disagree. Patch introduces explicit API
int perthread_pages_reserve(int nrpages, int gfp); void perthread_pages_release(int nrpages); int perthread_pages_count(void);
sufficient to create and use per-thread reservations. Using current->private_pages_count directly
- makes API less uniform, not contained within single namespace (perthread_pages_*), and worse,
- exhibits internal implementation detail to the user.
Quoted 1 line
[...]
Nikita.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Quoted 7 lines · Nikita Danilov
sufficient to create and use per-thread reservations. Using
current->private_pages_countdirectly- makes API less uniform, not contained within single namespace (perthread_pages_*), and worse,
- exhibits internal implementation detail to the user.
Completely disagreed, hiding all the details doesn't help for such trivial access, it's just obsfucating things.
But looking at it the API doesn't make sense at all. Number of pages in the thread-pool is an internal implementation detail and no caller must look at it - think about two callers, e.g. filesystem and iscsi initiator using it in the same thread.
Here's an updated patch with my suggestions implemented and other goodies such a kerneldoc comments (but completely untested so far):
include/linux/gfp.h +3 -0
@@ -130,6 +130,9 @@#define __free_page (page) __free_pages((page), 0)#define free_page (addr) free_pages((addr),0) +extern int perthread_pages_reserve (unsigned int nrpages,unsigned int gfp_mask); +extern void perthread_pages_release (unsigned int nrpages); +void page_alloc_init (void );#endif /* __LINUX_GFP_H */
include/linux/init_task.h +1 -0
@@ -112,6 +112,7 @@ .proc_lock = SPIN_LOCK_UNLOCKED, \ .switch_lock = SPIN_LOCK_UNLOCKED, \ .journal_info = NULL, \ + .private_pages = LIST_HEAD_INIT(tsk.private_pages), \ }
include/linux/sched.h +1 -0
@@ -658,6 +658,7 @@/* VM state */ struct reclaim_state *reclaim_state; +struct list_head private_pages;/* per-process private pages */ struct dentry *proc_dentry;struct backing_dev_info *backing_dev_info;
kernel/fork.c +3 -0
@@ -153,6 +153,9 @@ tsk->thread_info = ti; ti->task = tsk; +/* initialize list of pages privately reserved by process */ +INIT_LIST_HEAD (&tsk->private_pages); +/* One for us, one for whoever does the "release_task()" (usually parent) */ atomic_set (&tsk->usage,2 );return tsk;
mm/page_alloc.c +86 -0
98 lines not on this page · raw message
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Quoted 24 lines · Christoph Hellwig
Quoted 7 lines · Nikita Danilov
sufficient to create and use per-thread reservations. Using
current->private_pages_countdirectly- makes API less uniform, not contained within single namespace (perthread_pages_*), and worse,
- exhibits internal implementation detail to the user.
Completely disagreed, hiding all the details doesn't help for such trivial access, it's just obsfucating things.
But looking at it the API doesn't make sense at all. Number of pages in the thread-pool is an internal implementation detail and no caller must look at it - think about two callers, e.g. filesystem and iscsi initiator using it in the same thread.
Here's an updated patch with my suggestions implemented and other goodies such a kerneldoc comments (but completely untested so far):
include/linux/gfp.h line 134
Quoted 5 lines
include/linux/gfp.h +2
-0@@ -130,6 +130,9 @@#define __free_page (page) __free_pages((page), 0)#define free_page (addr) free_pages((addr),0) +extern int perthread_pages_reserve (unsigned int nrpages,unsigned int gfp_mask); +extern void perthread_pages_release (unsigned int nrpages);
I don't see how this can work.
/* make conservative estimation... */
perthread_pages_reserve(100, GFP_KERNEL);
/* actually, use only 10 pages during atomic operation */
/* want to release remaining 90 pages... */
perthread_pages_release(???);Can you elaborate how to calculate number of pages that has to be released?
Nikita.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Quoted 10 lines · Nikita Danilov
I don't see how this can work.
/* make conservative estimation... */ perthread_pages_reserve(100, GFP_KERNEL); /* actually, use only 10 pages during atomic operation */ /* want to release remaining 90 pages... */ perthread_pages_release(???);
Quoted 2 lines
Can you elaborate how to calculate number of pages that has to be released?
That's a good question actually, and it's true for the original version aswell if we want (and to make the API useful we must) make it useable for multiple callers in the same thread.
Assuming the callers strictly nest we can indeed just go back to the orininal count, maybe with an API like:
int perthread_pages_reserve(unsigned int nrpages, unsigned int gfp_mask); void perthread_pages_release(unsigned int nrpages_goal);
unsigned int old_nr_pages; ... old_nr_pages = perthread_pages_reserve(100, GFP_KERNEL); ... perthread_pages_release(old_nr_pages);
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
In reply to Vladimir Savelievmm/page_alloc.c __alloc_pages(unsigned int gfp_mask, uns · line 765
Quoted 6 lines · Vladimir Saveliev
[...]
mm/page_alloc.c renamed from mm/page_alloc.c~reiser4-perthread-pages +5
-0+if (order ==0 ) { + page =perthread_pages_alloc (); +if (page !=NULL ) +return page; + }
I hope this has not been extensively discussed yet, and I missed the thread but, does everybody think this is a good thing?
This seems like a very asymmetrical behavior. If the code explicitly reserves pages, it should explicitly use them, or it will become impossible to track down who is using what (not to mention that this will slow down every regular user of __alloc_pages, even if it is just for a quick test).
Why are there specialized functions to reserve the pages, but then they are used through the standard __alloc_pages interface?
At the very least this test should be moved to the very beginning of the function. It is of no use to calculate "can_try_harder" before running this code if it will use a reserved page.
Having a specialized function to get the reserved pages, would also make the logic in "perthread_pages_reserve" more clear (i.e., that comment would become unnecessary), and lose the test to "in_interrupt()" in "perthread_pages_alloc", if I'm reading this correctly.
Signature · 9 lines
Paulo Marques - www.grupopie.com "A journey of a thousand miles begins with a single step." Lao-tzu, The Way of Lao-tzu -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Quoted 8 lines · Paulo Marques
This seems like a very asymmetrical behavior. If the code explicitly reserves pages, it should explicitly use them, or it will become impossible to track down who is using what (not to mention that this will slow down every regular user of
__alloc_pages, even if it is just for a quick test).Why are there specialized functions to reserve the pages, but then they are used through the standard
__alloc_pagesinterface?
That seems to be the whole point of the patch, as that way it'll serve all sub-allocators or kernel function called by the user. Without this behaviour the caller could have simply used a mempool.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Quoted 7 lines · Christoph Hellwig
Quoted 6 lines · Paulo Marques
This seems like a very asymmetrical behavior. If the code explicitly reserves pages, it should explicitly use them, or it will become impossible to track down who is using what (not to mention that this will slow down every regular user of
__alloc_pages, even if it is just for a quick test).
Quoted 6 lines
Quoted 2 lines
Why are there specialized functions to reserve the pages, but then they are used through the standard
__alloc_pagesinterface?That seems to be the whole point of the patch, as that way it'll serve all sub-allocators or kernel function called by the user. Without this behaviour the caller could have simply used a mempool.
I still don't get it why reiserfs can't put the preallocated pool somewhere private like all other users who do similar things do too (and yes there are quite a lot of subsystems who do preallocation)
Why pollute task_struct for this?
-Andi
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
In reply to Paulo MarquesPaulo Marques <[email protected]> writes:
[...]
Quoted 9 lines
This seems like a very asymmetrical behavior. If the code explicitly reserves pages, it should explicitly use them, or it will become impossible to track down who is using what (not to mention that this will slow down every regular user of
__alloc_pages, even if it is just for a quick test).Why are there specialized functions to reserve the pages, but then they are used through the standard
__alloc_pagesinterface?
That's the whole idea behind this patch: at the beginning of "atomic" operation, some number of pages is reserved. As these pages are available through page allocator, _all_ allocations done by atomic operation will use reserved pages transparently. For example:
perthread_pages_reserve(nr, GFP_KERNEL);
foo()->
bar()->
page = find_or_create_page(some_mapping, ...);
perthread_pages_release(unused_pages);find_or_create() pages will use pages reserved for this thread and, hence, is guaranteed to succeed (given correct reservation).
Alternative is to pass some sort of handle all the way down to actual calls to allocator, and to modify all generic code to use reservations.
Nikita.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Quoted 16 lines · Nikita Danilov
That's the whole idea behind this patch: at the beginning of "atomic" operation, some number of pages is reserved. As these pages are available through page allocator, _all_ allocations done by atomic operation will use reserved pages transparently. For example:
perthread_pages_reserve(nr, GFP_KERNEL); foo()-> bar()-> page = find_or_create_page(some_mapping, ...); perthread_pages_release(unused_pages);
Quoted 5 lines
find_or_create()pages will use pages reserved for this thread and, hence, is guaranteed to succeed (given correct reservation).Alternative is to pass some sort of handle all the way down to actual calls to allocator, and to modify all generic code to use reservations.
Maybe I'm being thick, but I don't see how you can protect the reservation of an outer reserver in the above way:
perthread_pages_reserve(10); ... /* current->private_pages_count = 10 */ perthread_pages_reserve(10) /* private_pages_count = 20 */ use 5 pages /* private_pages_count = 15 */ perthread_pages_release(5);
But how does the caller come up with the final "5"?
Seems better to me if prethread_pages_reserve() were to return the initial value of private_pages_count, so the caller can do:
old = perthread_pages_reserve(10); use 5 pages perthread_pages_release(old);
or whatever.
That kinda stinks too in a way, because both the outer and the inner callers need to overallocate pages on behalf of the worst case user in some deep call stack.
And the whole idea is pretty flaky really - how can one precalculate how much memory an arbitrary md-on-dm-on-loop-on-md-on-NBD stack will want to use? It really would be better if we could drop the whole patch and make reiser4 behave more sanely when its writepage is called with for_reclaim=1. --
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Quoted 4 lines
And the whole idea is pretty flaky really - how can one precalculate how much memory an arbitrary md-on-dm-on-loop-on-md-on-NBD stack will want to use? It really would be better if we could drop the whole patch and make reiser4 behave more sanely when its writepage is called with for_reclaim=1.
Or just preallocate into a private array.
-Andi
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
In reply to Andrew MortonAndrew Morton <[email protected]> writes:
[...]
Quoted 11 lines
Maybe I'm being thick, but I don't see how you can protect the reservation of an outer reserver in the above way:
perthread_pages_reserve(10); ... /* current->private_pages_count = 10 */ perthread_pages_reserve(10) /* private_pages_count = 20 */ use 5 pages /* private_pages_count = 15 */ perthread_pages_release(5);But how does the caller come up with the final "5"?
wasreserved = perthread_pages_count();
result = perthread_pages_reserve(estimate_reserve(), GFP_KERNEL);
if (result != 0)
return result;
/* do something that consumes reservation */
perthread_pages_release(perthread_pages_count() - wasreserved);Quoted 10 lines
Seems better to me if
prethread_pages_reserve()were to return the initial value ofprivate_pages_count, so the caller can do:old = perthread_pages_reserve(10); use 5 pages perthread_pages_release(old);or whatever.
Quoted 8 lines
That kinda stinks too in a way, because both the outer and the inner callers need to overallocate pages on behalf of the worst case user in some deep call stack.
And the whole idea is pretty flaky really - how can one precalculate how much memory an arbitrary md-on-dm-on-loop-on-md-on-NBD stack will want to use? It really would be better if we could drop the whole patch and make reiser4 behave more sanely when its writepage is called with for_reclaim=1.
Reiser4 doesn't use this for ->writepage(), by the way. This is used by tree balancing code to assure that balancing cannot get -ENOMEM in the middle of tree modification, because undo is _so_ very complicated.
Nikita.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Quoted 9 lines · Nikita Danilov
Quoted 5 lines
And the whole idea is pretty flaky really - how can one precalculate how much memory an arbitrary md-on-dm-on-loop-on-md-on-NBD stack will want to use? It really would be better if we could drop the whole patch and make reiser4 behave more sanely when its writepage is called with for_reclaim=1.
Reiser4 doesn't use this for ->writepage(), by the way. This is used by tree balancing code to assure that balancing cannot get
-ENOMEMin the middle of tree modification, because undo is _so_ very complicated.
Oh. And that involves performing I/O, yes?
Why does the filesystem risk going oom during the rebalance anyway? Is it doing atomic allocations?
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Quoted 7 lines · Andrew Morton
Quoted 6 lines · Nikita Danilov
Quoted 5 lines
And the whole idea is pretty flaky really - how can one precalculate how much memory an arbitrary md-on-dm-on-loop-on-md-on-NBD stack will want to use? It really would be better if we could drop the whole patch and make reiser4 behave more sanely when its writepage is called with for_reclaim=1.
Quoted 5 lines
Quoted 3 lines
Reiser4 doesn't use this for ->writepage(), by the way. This is used by tree balancing code to assure that balancing cannot get
-ENOMEMin the middle of tree modification, because undo is _so_ very complicated.Oh. And that involves performing I/O, yes?
Yes, balancing may read tree or bitmap nodes from the disk.
Quoted 3 lines
Why does the filesystem risk going oom during the rebalance anyway? Is it doing atomic allocations?
No, just __alloc_pages(GFP_KERNEL, 0, ...) returns NULL. When this happens, the only thing balancing can do is to panic.
Nikita.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Quoted 7 lines · Nikita Danilov
Quoted 4 lines
Why does the filesystem risk going oom during the rebalance anyway? Is it doing atomic allocations?
No, just
__alloc_pages(GFP_KERNEL, 0, ...)returns NULL. When this happens, the only thing balancing can do is to panic.
__alloc_pages(GFP_KERNEL, ...) doesn't return NULL. It'll either succeed or never return ;) That behaviour may change at any time of course, but it does make me wonder why we're bothering with this at all. Maybe it's because of the possibility of a GFP_IO failure under your feet or something?
What happens if reiser4 simply doesn't use this code?
If we introduce this mechanism, people will end up using it all over the place. Probably we could remove radix_tree_preload(), which is the only similar code I can I can immediately think of.
Page reservation is not a bad thing per-se, but it does need serious thought.
How does reiser4 end up deciding how many pages to reserve? Gross overkill?
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Quoted 11 lines · Andrew Morton
Quoted 7 lines · Nikita Danilov
Quoted 4 lines
Why does the filesystem risk going oom during the rebalance anyway? Is it doing atomic allocations?
No, just
__alloc_pages(GFP_KERNEL, 0, ...)returns NULL. When this happens, the only thing balancing can do is to panic.
__alloc_pages(GFP_KERNEL, ...)doesn't return NULL. It'll either succeed or never return ;) That behaviour may change at any time of course, but it
Hmm... it used to, when I wrote that code.
Quoted 3 lines
does make me wonder why we're bothering with this at all. Maybe it's because of the possibility of a
GFP_IOfailure under your feet or something?
This is what happens:
- we start inserting new item into balanced tree,
- lock nodes on the leaf level and modify them
- go to the parent level
- lock nodes on the parent level and modify them. This may require allocating new nodes. If allocation fails---we have to panic, because tree is in inconsistent state and there is no roll-back; if allocation hangs forever---deadlock is on its way, because we are still keeping locks on nodes on the leaf level.
Quoted 2 lines
What happens if reiser4 simply doesn't use this code?
At the time I tested it, it panicked after getting NULL from __alloc_pages(). With current `do_retry' logic in __alloc_pages() it will deadlock, I guess.
Quoted 11 lines
If we introduce this mechanism, people will end up using it all over the place. Probably we could remove
radix_tree_preload(), which is the only similar code I can I can immediately think of.Page reservation is not a bad thing per-se, but it does need serious thought.
How does reiser4 end up deciding how many pages to reserve? Gross overkill?
Worst-case behavior of tree algorithms is well-known. Yes it's overkill.
Nikita.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Quoted 6 lines · Nikita Danilov
Quoted 3 lines · Andrew Morton
__alloc_pages(GFP_KERNEL, ...)doesn't return NULL. It'll either succeed or never return ;) That behaviour may change at any time of course, but itHmm... it used to, when I wrote that code.
And still does, if OOM decides to kill _your_ task: OOM sets PF_MEMDIE, and then you don't get to go the retry route at all:
/* This allocation should allow future memory freeing. */
if ((p->flags & (PF_MEMALLOC | PF_MEMDIE)) && !in_interrupt()) {
/* go through the zonelist yet again, ignoring mins */
for (i = 0; (z = zones[i]) != NULL; i++) {
page = buffered_rmqueue(z, order, gfp_mask);
if (page)
goto got_pg;
}
goto nopage;
}
....
nopage:
....
return NULL;--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
In reply to Andrew MortonQuoted 18 lines · Andrew Morton
Quoted 7 lines · Nikita Danilov
Quoted 4 lines
Why does the filesystem risk going oom during the rebalance anyway? Is it doing atomic allocations?
No, just
__alloc_pages(GFP_KERNEL, 0, ...)returns NULL. When this happens, the only thing balancing can do is to panic.
__alloc_pages(GFP_KERNEL, ...)doesn't return NULL. It'll either succeed or never return ;) That behaviour may change at any time of course, but it does make me wonder why we're bothering with this at all. Maybe it's because of the possibility of aGFP_IOfailure under your feet or something?What happens if reiser4 simply doesn't use this code?
Quoted 6 lines
If we introduce this mechanism, people will end up using it all over the place. Probably we could remove
radix_tree_preload(), which is the only similar code I can I can immediately think of.Page reservation is not a bad thing per-se, but it does need serious thought.
Whenever scheme comes up I dont think the current check in __alloc_pages() is any good:
if (order == 0) {
page = perthread_pages_alloc();
if (page != NULL)
return page;
}Two things:
- all instances of an allocator from the current thread will eat from the perthread reserves, you probably want only a few special allocations to eat from the reserves? Thing is its not really a reservation intended for emergency situations, rather a "generic per-thread pool" the way things are now.
- its a real fast path, we're adding quite some instructions there which are only used by reiserfs now.
I think in a "final" implementation emergency allocations should be explicitly stated as such by the callers ?
Quoted 7 lines
How does reiser4 end up deciding how many pages to reserve? Gross overkill?
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC] per thread page reservation patch
Marcelo Tosatti <[email protected]> writes:
[...]
Quoted 5 lines
- all instances of an allocator from the current thread will eat from the perthread reserves, you probably want only a few special allocations to eat from the reserves? Thing is its not really a reservation intended for emergency situations, rather a "generic per-thread pool" the way things are now.
Per-thread reservations are only useful when they are transparent. If users have to call special function, or to pass special flag to __alloc_pages() they might just use mempool as well. Idea is to reserve some number of pages before starting complex operation so that generic function (like find_get_page()) called as part of this operation are guaranteed to succeed.
Quoted 3 lines
- its a real fast path, we're adding quite some instructions there which are only used by reiserfs now.
Yes, this worries me too. Possibly we should move this check below in __alloc_pages(), so that per-thread reservation is only checked if fast-path allocation failed.
Nikita.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
reiser4 core patches: [Was: [RFC] per thread page reservation patch]
In reply to Andrew MortonHello
[per thread page reservation discussion is snipped]
Quoted 4 lines
And the whole idea is pretty flaky really - how can one precalculate how much memory an arbitrary md-on-dm-on-loop-on-md-on-NBD stack will want to use? It really would be better if we could drop the whole patch and make reiser4 behave more sanely when its writepage is called with for_reclaim=1.
ok, we will change reiser4 to keep its pool of preallocated pages privately as Andi suggested. This will require to have reiser4_find_or_create_page which will do what find_or_create_page does plus get a page from the list of preallocated pages if alloc_page returns NULL.
So, currently, reiser4 depends on the core patches listed below. Would you please look over them and let us know which look reasonable and which are to be eliminated.
reiser4-sb_sync_inodes.patch
This patch adds new operation (sync_inodes) to struct super_operations. This operation allows a filesystem to writeout dirty pages not necessarily on per-inode basis. Default implementation of this operation is sync_sb_inodes.
reiser4-allow-drop_inode-implementation.patch
This EXPORT_SYMBOL-s inodes_stat, generic_forget_inode, destroy_inode and wake_up_inode which are needed to implement drop_inode. reiser4 implements function similar to generic_delete_inode to be able to truncate inode pages together with metadata destroying in reiser4_delete_inode whereas generic_delete_inode first truncates pages and then calls foofs_delete_inode.
reiser4-truncate_inode_pages_range.patch
This patch makes truncate_inode_pages_range from truncate_inode_pages. truncate_inode_pages_range can truncate only pages which fall into specified range. truncate_inode_pages which trucates all pages starting from specified offset is made a one liner which calls truncate_inode_pages_range.
reiser4-rcu-barrier.patch
This patch introduces a new interface - rcu_barrier() which waits until all the RCUs queued until this call have been completed. This patch is by Dipankar Sarma <[email protected]>
reiser4-reget-page-mapping.patch
This patch allows to remove page from page cache in foofs_releasepage.
reiser4-radix_tree_lookup_slot.patch
This patch extents radxi tree API with a function which returns pointer to found item within the tree.
reiser4-export-remove_from_page_cache.patch reiser4-export-page_cache_readahead.patch reiser4-export-pagevec-funcs.patch reiser4-export-radix_tree_preload.patch reiser4-export-find_get_pages.patch reiser4-export-generic_sync_sb_inodes.patch
The above patches EXPORT_SYMBOL several functions. Others may find it useful if they were exported.
reiser4-export-inode_lock.patch
Reiser4 used to manipulate with super block inode lists so it needs inode_lock exported.
We are working now to not need this. But quite many things are based on it. Is there any chance to have it included?
Thanks
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: reiser4 core patches: [Was: [RFC] per thread page reservation patch]
Hi Vladimir,
a general request:
If you add new EXPORT_SYMBOL's, I'd strongly prefer them being EXPORT_SYMBOL_GPL's unless there's a very good reason for an EXPORT_SYMBOL.
cu
Adrian
Signature · 10 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>Re: reiser4 core patches: [Was: [RFC] per thread page reservation patch]
In reply to Vladimir SavelievQuoted 9 lines
So, currently, reiser4 depends on the core patches listed below. Would you please look over them and let us know which look reasonable and which are to be eliminated.
reiser4-sb_sync_inodes.patch
This patch adds new operation (sync_inodes) to structsuper_operations. This operation allows a filesystem to writeout dirty pages not necessarily on per-inode basis. Default implementation of this operation issync_sb_inodes.
ok.
Quoted 7 lines
reiser4-allow-drop_inode-implementation.patch
This EXPORT_SYMBOL-sinodes_stat,generic_forget_inode,destroy_inodeandwake_up_inodewhich are needed to implementdrop_inode. reiser4 implements function similar togeneric_delete_inodeto be able to truncate inode pages together with metadata destroying inreiser4_delete_inodewhereasgeneric_delete_inodefirst truncates pages and then callsfoofs_delete_inode.
Not okay. I though I explained you how to do it instead already?
Quoted 6 lines
reiser4-truncate_inode_pages_range.patch
This patch makestruncate_inode_pages_rangefromtruncate_inode_pages.truncate_inode_pages_rangecan truncate only pages which fall into specified range.truncate_inode_pageswhich trucates all pages starting from specified offset is made a one liner which callstruncate_inode_pages_range.
Ok.
Quoted 4 lines
reiser4-rcu-barrier.patch
This patch introduces a new interface -rcu_barrier()which waits until all the RCUs queued until this call have been completed. This patch is by Dipankar Sarma <[email protected]>
No idea, but if Dipankar things it's okay it probably is.
Quoted 2 lines
reiser4-reget-page-mapping.patch
This patch allows to remove page from page cache infoofs_releasepage.
probably ok, Andrew?
Quoted 3 lines
reiser4-radix_tree_lookup_slot.patch
This patch extents radxi tree API with a function which returns pointer to found item within the tree.
Idea is okay, implementation needs work:
__lookup_slot should be called radix_tree_lookup_slot and exported direcly.
radix_tree_lookup should be an inlined wrapper in the header, and kill the != NULL comparims, it's superflous:
static inline void *radix_tree_lookup(struct radix_tree_root *root,
unsigned long index)
{
void **slot = radix_tree_lookup_slot(root, index);
return slot ? *slot : NULL;
}Quoted 1 line
reiser4-export-remove_from_page_cache.patch
Probably okay, but why do you need both remove_from_page_cache and __remove_from_page_cache?
Quoted 1 line
reiser4-export-page_cache_readahead.patch
ok
Quoted 1 line
reiser4-export-pagevec-funcs.patch
ok
Quoted 1 line
reiser4-export-radix_tree_preload.patch
this one is nasty. not your fault though, but why do we even have global radix-tree preloads instead of pools. What do you need it for?
Quoted 1 line
reiser4-export-find_get_pages.patch
Why don't you use pagevecs instead?
Quoted 1 line
reiser4-export-generic_sync_sb_inodes.patch
Can't find this one in current -mm
Quoted 5 lines
reiser4-export-inode_lock.patch
Reiser4 used to manipulate with super block inode lists so it needsinode_lockexported.
We are working now to not need this. But quite many things are based on it. Is there any chance to have it included?
No. Modules must not look at inode_lock, it's far too much of an implementation detail.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: 2.6.10-mm1
In reply to Andrew MortonQuoted 2 lines
remove-the-bkl-by-turning-it-into-a-semaphore.patch
remove the BKL by turning it into a semaphore
This _smp_processor_id() mess is horribly ugly. Do you really need that debug check?
Re: 2.6.10-mm1
Quoted 5 lines · Christoph Hellwig
Quoted 2 lines
remove-the-bkl-by-turning-it-into-a-semaphore.patch
remove the BKL by turning it into a semaphoreThis
_smp_processor_id()mess is horribly ugly. Do you really need that debug check?
wrt. necessity, it's quite handy: check out the 2.6.10 changelog, almost all preemption bugs wrt. smp_processor_id() were found this way.
what precisely is the 'mess' you are referring to?
is it the way the include file falls back to the original smp_processor_id() definition if an arch doesnt define __smp_processor_id()? I could get rid of that and just require every arch to define __smp_processor_id().
or is it the addition of _smp_processor_id() as a way to signal 'this smp_processor_id() call in a preemptible region is fine, trust me'? We could do smp_processor_id_preempt() or some other name - any better suggestions?
Ingo
Re: 2.6.10-mm1
Quoted 2 lines · Ingo Molnar
or is it the addition of
_smp_processor_id()as a way to signal 'thissmp_processor_id()call in a preemptible region is fine, trust me'?
Yes.
Quoted 3 lines
We
could dosmp_processor_id_preempt()or some other name - any better suggestions?
I'd just kill the debug check and rely on the eye of the review to not let new users of smp_processor_id slip in.
Re: 2.6.10-mm1
Quoted 4 lines · Christoph Hellwig
Quoted 2 lines · Ingo Molnar
or is it the addition of
_smp_processor_id()as a way to signal 'thissmp_processor_id()call in a preemptible region is fine, trust me'?
Quoted 8 lines
Yes.
Quoted 3 lines
We
could dosmp_processor_id_preempt()or some other name - any better suggestions?I'd just kill the debug check and rely on the eye of the review to not let new users of
smp_processor_idslip in.
relying on that is quite futile. E.g. in the block IO code it needed 3-4 iterations even after the first instance was found to get all the cases right. There are functions that are always called from under a lock then some unlocked call happens and we've got trouble. Often the bug is some very rare and obscure corruption of a statistics value, nobody really notices that.
by today i think we've identified most of the places that can safely do smp_processor_id() in a preemptible section (in x86 and x64) - it's only around 3% of the total smp_processor_id() use. I'd rather allow these exceptions and flag new exceptions as they get added - they are added at least an order of magnitude more rarely than smp_processor_id() gets added.
Ingo
Re: 2.6.10-mm1
In reply to Andrew MortonQuoted 1 line · Andrew Morton
+m32r-fix-not-to-execute-noexec-pages-0-3.patch
This patch appears to be empty. Also, quilt barfs on such things. The patch as it appeared in broken-out/ is attached.
-- wli
From: Hirokazu Takata <[email protected]>
Hello,
Here is a patchset to fix a bug of m32r kernel 2.6.9 that a code on a noexec page can be executed incorrectly.
For good security, stack region should be non-executable. This fix is also needed to achieve non-executable stack.
Please apply this to 2.6.10 kernel if possible.
Thank you.
---
[PATCH 2.6.10-rc3-mm1] m32r: Cause SIGSEGV for nonexec page execution (1/3)
- Cause a segmentation fault for an illegal execution of a code on non-executable memory page.
[PATCH 2.6.10-rc3-mm1] m32r: Don't encode ACE_INSTRUCTION in address (2/3)
- To be more comprehensive, keep ACE_INSTRUCTION (access exception on instruction execution) information in thread_info->flags, instead of encoding it into address parameter.
[PATCH 2.6.10-rc3-mm1] m32r: Clean up arch/m32r/mm/fault.c (3/3)
- Fix a typo: ACE_USEMODE --> ACE_USERMODE.
- Update copyright statement, and so on.
--
Hirokazu Takata <[email protected]>
Linux/M32R Project: http://www.linux-m32r.org/
---
_
Re: 2.6.10-mm1
In reply to Andrew MortonQuoted 1 line · you
+replace-numnodes-with-node_online_map-ia64.patch
Here are some compile fixes for this patch. Looks like simple typos. Note that the kernel won't boot even with these fixes, I'm debugging that now (suspect nodemask related stuff is causing the hang too).
Jesse
arch/ia64/mm/discontig.c +1 -1
@@ -379,7 +379,7 @@ static void __init reserve_pernode_spacestruct bootmem_data *bdp;int node; -for_each_online (node) { +for_each_online_node (node) {pg_data_t *pdp = mem_data[node].pgdat; bdp = pdp->bdata;
arch/ia64/sn/kernel/sn2/prominfo_proc.c +1 -1
@@ -266,7 +266,7 @@ void __exit prominfo_exit(void)char name[NODE_NAME_LEN ]; entp = proc_entries; - for (cnodeid) { +for_each_online_node (cnodeid) {remove_proc_entry ("fit" , *entp);remove_proc_entry ("version" , *entp);sprintf (name,"node%d" , cnodeid);
Re: 2.6.10-mm1
Quoted 10 lines · Jesse Barnes
Quoted 1 line · you
+replace-numnodes-with-node_online_map-ia64.patch
Here are some compile fixes for this patch. Looks like simple typos. Note that the kernel won't boot even with these fixes, I'm debugging that now (suspect nodemask related stuff is causing the hang too).
Signed-off-by Jesse Barnes <[email protected]>Jesse
Those 2 fixes look good. Thanks for the catch, Jesse!
-Matt
PATCH 1/1 pktcdvd: make two functions static
In reply to Andrew MortonMake two needlessly global functions static.
---
linux-petero/drivers/block/pktcdvd.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/block/pktcdvd.c renamed from drivers/block/pktcdvd.c~pktcdvd-static +2 -2
@@ -2627,7 +2627,7 @@ static struct miscdevice pkt_misc = { .fops = &pkt_ctl_fops }; -int pkt_init (void ) +static int pkt_init (void ) {int ret;
@@ -2663,7 +2663,7 @@ out2:return ret; } -void pkt_exit (void ) +static void pkt_exit (void ) {remove_proc_entry ("pktcdvd" , proc_root_driver);misc_deregister (&pkt_misc);
_
Signature · 2 lines
Peter Osterlund - [email protected] http://web.telia.com/~u89404340
PATCH 1/1 pktcdvd: grep-friendly function prototypes
Put function prototypes on a single source line to make them more grep-friendly.
---
linux-petero/drivers/block/pktcdvd.c | 6 ++---- 1 files changed, 2 insertions(+), 4 deletions(-)
drivers/block/pktcdvd.c renamed from drivers/block/pktcdvd.c~pktcdvd-whitespace +2 -4
@@ -607,8 +607,7 @@ static int pkt_set_segment_merging(struc/* * Copy CD_FRAMESIZE bytes from src_bio into a destination page */ -static void pkt_copy_bio_data (struct bio *src_bio,int seg,int offs, -struct page *dst_page,int dst_offs) +static void pkt_copy_bio_data (struct bio *src_bio,int seg,int offs,struct page *dst_page,int dst_offs) {unsigned int copy_size =CD_FRAMESIZE ;
@@ -1301,8 +1300,7 @@ static void pkt_print_settings(struct pkprintk ("Mode-%c disc\n" , pd->settings.block_mode ==8 ?'1' :'2' ); } -static int pkt_mode_sense (struct pktcdvd_device *pd,struct packet_command *cgc, -int page_code,int page_control) +static int pkt_mode_sense (struct pktcdvd_device *pd,struct packet_command *cgc,int page_code,int page_control) {memset (cgc->cmd,0 ,sizeof (cgc->cmd));
_
Signature · 2 lines
Peter Osterlund - [email protected] http://web.telia.com/~u89404340
PATCH 1/1 pktcdvd: Small documentation update
Mention that a new DVD+RW disc has to be formatted before first use.
---
linux-petero/Documentation/cdrom/packet-writing.txt | 3 +++ 1 files changed, 3 insertions(+)
Documentation/cdrom/packet-writing.txt renamed from Documentation/cdrom/packet-writing.txt~packet-doc-fix +3 -0
@@ -43,6 +43,8 @@ shall implement "true random writes with that it should be possible to put any filesystem with a block size >= 2KB on such a disc. For example, it should be possible to do: + # dvd+rw-format /dev/hdc (only needed if the disc has never + been formatted) # mkudffs /dev/hdc # mount /dev/hdc /cdrom -t udf -o rw,noatime
@@ -54,6 +56,7 @@ writes are not 32KB aligned. Both problems can be solved by using the pktcdvd driver, which always generates aligned writes. + # dvd+rw-format /dev/hdc # pktsetup dev_name /dev/hdc # mkudffs /dev/pktcdvd/dev_name # mount /dev/pktcdvd/dev_name /cdrom -t udf -o rw,noatime
_
Signature · 2 lines
Peter Osterlund - [email protected] http://web.telia.com/~u89404340
PATCH 1/1 isofs: Remove useless include
When I was editing cdrom.h, I noticed that fs/isofs/compress.c was recompiled. This patch removes the useless #include that caused the unnecessary recompilation.
---
linux-petero/fs/isofs/compress.c | 1 - 1 files changed, 1 deletion(-)
fs/isofs/compress.c renamed from fs/isofs/compress.c~isofs-useless-include +0 -1
@@ -28,7 +28,6 @@#include <linux/string.h> #include <linux/slab.h> #include <linux/errno.h> -#include <linux/cdrom.h> #include <linux/init.h> #include <linux/nls.h> #include <linux/ctype.h>
_
Signature · 2 lines
Peter Osterlund - [email protected] http://web.telia.com/~u89404340
PATCH 1/1 synaptics: Remove unused struct member variable
This patch removes an unused variable in the synaptics_data struct and deletes a no longer helpful comment. I don't think this has been used since the very first synaptics kernel patch I submitted that did all processing in kernel space instead of delegating most of it to the X server.
---
linux-petero/drivers/input/mouse/synaptics.h | 2 -- 1 files changed, 2 deletions(-)
drivers/input/mouse/synaptics.h renamed from drivers/input/mouse/synaptics.h~synaptics-unused-var +0 -2
@@ -101,8 +101,6 @@ struct synaptics_data {unsigned long int ext_cap;/* Extended Capabilities */ unsigned long int identity;/* Identification */ -/* Data for normal processing */ -int old_w;/* Previous w value */ unsigned char pkt_type;/* packet type - old, new, etc */ unsigned char mode;/* current mode byte */ };
_
Signature · 2 lines
Peter Osterlund - [email protected] http://web.telia.com/~u89404340
Re: [PATCH] pktcdvd: make two functions static
In reply to Peter OsterlundHi,
While at it...
Quoted 13 lines · Peter Osterlund
Make two needlessly global functions static.
Signed-off-by Adrian Bunk <[email protected]>Signed-off-by Peter Osterlund <[email protected]>---
linux-petero/drivers/block/pktcdvd.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)diff -puN
drivers/block/pktcdvd.c~pktcdvd-staticdrivers/block/pktcdvd.c
drivers/block/pktcdvd.c 2005-01-03 21:39:56.985007024 +0100 static struct miscdevice pkt_misc = { · line 2633
Quoted 8 lines
drivers/block/pktcdvd.c 2005-01-03 21:39:56.985007024 +0100 renamed from drivers/block/pktcdvd.c~pktcdvd-static 2005-01-02 22:27:26.000000000 +0100 +1
-1@@ -2627,7 +2627,7 @@ static struct miscdevice pkt_misc = { .fops = &pkt_ctl_fops }; -int pkt_init(void) +static int pkt_init(void) { int ret;
__init
Quoted 10 lines
drivers/block/pktcdvd.c 2005-01-03 21:39:56.985007024 +0100 renamed from drivers/block/pktcdvd.c~pktcdvd-static 2005-01-02 22:27:26.000000000 +0100 +1
-1@@ -2663,7 +2663,7 @@ out2: return ret; } -void pkt_exit(void) +static void pkt_exit(void) { remove_proc_entry("pktcdvd", proc_root_driver); misc_deregister(&pkt_misc);_
__exit
Re: 2.6.10-mm1
In reply to Andrew Mortonbogus chunk generating a standalone ip_conntrack_proto_tcp.c.orig:
net/ipv4/netfilter/ip_conntrack_proto_tcp.c.orig 2004-12-24 17:10:34.000000000 -0800 renamed from dev/null 2003-09-15 06:40:47.000000000 -0700 +0 -0
@@ -0,0 +1,1091 @@
Ingo
PATCH 1/1 deprecate (un)register_ioctl32_conversion
In reply to Andrew MortonHello, Andrew, all!
Since in -mm1 we now have a race-free replacement (that being ioctl_compat), here is a patch to deprecate (un)register_ioctl32_conversion.
include/linux/ioctl32.h +5 -2
@@ -23,9 +23,12 @@*/ #ifdef CONFIG_COMPAT -extern int register_ioctl32_conversion (unsigned int cmd, + +/* The following two calls trigger an unfixable module unload race. */ +/* Deprecated in favor of ioctl_compat in struct file_operations. */ +extern int __deprecated register_ioctl32_conversion (unsigned int cmd,ioctl_trans_handler_t handler); -extern int unregister_ioctl32_conversion (unsigned int cmd); +extern int __deprecated unregister_ioctl32_conversion (unsigned int cmd);#else
Re: [PATCH] deprecate (un)register_ioctl32_conversion
Quoted 4 lines · Michael S. Tsirkin
Hello, Andrew, all!
Since in -mm1 we now have a race-free replacement (that being
ioctl_compat), here is a patch to deprecate (un)register_ioctl32_conversion.
Sorry, but this is a lot too early. Once there's a handfull users left in _mainline_ you can start deprecating it (or better remove it completely).
So far we have a non-final version of the replacement in -mm and no single user converted.
Re: [PATCH] deprecate (un)register_ioctl32_conversion
Hello!
Quoting r. Christoph Hellwig ([email protected]) "Re: [PATCH] deprecate (un)register_ioctl32_conversion":
Quoted 8 lines · Michael S. Tsirkin
Quoted 4 lines
Hello, Andrew, all!
Since in -mm1 we now have a race-free replacement (that being
ioctl_compat), here is a patch to deprecate (un)register_ioctl32_conversion.Sorry, but this is a lot too early. Once there's a handfull users left in _mainline_ you can start deprecating it (or better remove it completely).
I dont know. So how will people know they are supposed to convert then?
Quoted 2 lines
So far we have a non-final version of the replacement in -mm and no single user converted.
Christoph, I know you want to remove the inode parameter :)
Otherwise I think -mm1 has the final version of the replacement.
MST
Re: [PATCH] deprecate (un)register_ioctl32_conversion
Quoted 1 line · Michael S. Tsirkin
I dont know. So how will people know they are supposed to convert then?
Tell the janitors about it - or do it yourself. Except for taking care of the BKL going away it's a trivial conversion.
Andrew Morton
AppliedRe: [PATCH] deprecate (un)register_ioctl32_conversion
In reply to Michael S. TsirkinQuoted 11 lines · Michael S. Tsirkin
Quoting r. Christoph Hellwig ([email protected]) "Re: [PATCH] deprecate (un)register_ioctl32_conversion":
Quoted 8 lines · Michael S. Tsirkin
Quoted 4 lines
Hello, Andrew, all!
Since in -mm1 we now have a race-free replacement (that being
ioctl_compat), here is a patch to deprecate (un)register_ioctl32_conversion.Sorry, but this is a lot too early. Once there's a handfull users left in _mainline_ you can start deprecating it (or better remove it completely).
Quoted 8 lines
I dont know. So how will people know they are supposed to convert then?
Quoted 2 lines
So far we have a non-final version of the replacement in -mm and no single user converted.
Christoph, I know you want to remove the inode parameter :)
Otherwise I think -mm1 has the final version of the replacement.
I merged Christoph's verion of the patch into -mm.
Documentation/filesystems/Locking renamed from Documentation/filesystems/Locking~ioctl-rework-2 +7 -0
@@ -350,6 +350,8 @@ prototypes: unsigned int (*poll) (struct file *, struct poll_table_struct *); int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long); + long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); + long (*compat_ioctl) (struct file *, unsigned int, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); int (*open) (struct inode *, struct file *); int (*flush) (struct file *);
@@ -383,6 +385,8 @@ aio_write: no readdir: no poll: no ioctl: yes (see below) +unlocked_ioctl: no (see below) +compat_ioctl: no mmap: no open: maybe (see below) flush: no
@@ -428,6 +432,9 @@ move ->readdir() to inode_operations and anything that resembles union-mount we won't have a struct file for all components. And there are other reasons why the current interface is a mess... +->ioctl() on regular files is superceded by the ->unlocked_ioctl() that +doesn't take the BKL. + ->read on directories probably must go away - we should just enforce -EISDIR in sys_read() and friends.
fs/compat.c renamed from fs/compat.c~ioctl-rework-2 +65 -55
142 lines not on this page · raw message
fs/ioctl.c renamed from fs/ioctl.c~ioctl-rework-2 +39 -17
103 lines not on this page · raw message
include/linux/fs.h renamed from include/linux/fs.h~ioctl-rework-2 +4 -2
@@ -907,8 +907,8 @@ typedef int (*read_actor_t)(read_descrip/* * NOTE: -* read, write, poll, fsync, readv, writev can be called -* without the big kernel lock held in all filesystems. +* read, write, poll, fsync, readv, writev, unlocked_ioctl and compat_ioctl +* can be called without the big kernel lock held in all filesystems. */ struct file_operations {struct module *owner;
@@ -920,6 +920,8 @@ struct file_operations {int (*readdir) (struct file *,void *,filldir_t );unsigned int (*poll) (struct file *,struct poll_table_struct *);int (*ioctl) (struct inode *,struct file *,unsigned int ,unsigned long ); +long (*unlocked_ioctl) (struct file *,unsigned int ,unsigned long ); +long (*compat_ioctl) (struct file *,unsigned int ,unsigned long );int (*mmap) (struct file *,struct vm_area_struct *);int (*open) (struct inode *,struct file *);int (*flush) (struct file *);
_
Re: [PATCH] deprecate (un)register_ioctl32_conversion
Hello!
Quoting r. Andrew Morton ([email protected]) "Re: [PATCH] deprecate (un)register_ioctl32_conversion":
Quoted 5 lines
Quoted 3 lines
Christoph, I know you want to remove the inode parameter :)
Otherwise I think -mm1 has the final version of the replacement.
I merged Christoph's verion of the patch into -mm.
I see some more problems with this decision.
Quoted 16 lines
asmlinkage long compat_sys_ioctl(unsigned int fd, unsigned int cmd,
fs/compat.c renamed from fs/compat.c~ioctl-rework-2 +1
-6unsigned long arg) { -struct file * filp; +struct file *filp;int error = -EBADF ;struct ioctl_trans *t; filp =fget (fd); -if (!filp) - goto out2; - -if (!filp->f_op || !filp->f_op->ioctl) { - error =sys_ioctl (fd, cmd, arg);
fs/compat.c out: · line 445
Quoted 10 lines
fs/compat.c renamed from fs/compat.c~ioctl-rework-2 +8
-0+if (!filp) goto out; + +if (!filp->f_op) { +if (!filp->f_op->ioctl) + goto do_ioctl; + }else if (filp->f_op->compat_ioctl) { + error = filp->f_op->compat_ioctl (filp, cmd, arg); + goto out_fput; }
Stare at this as I might, I dont understand why does it make sence. So if filp->f_op is NULL, you are then checking filp->f_op->ioctl? Looks like an oops to me.
What should be there:
fs/compat.c out: · line 444
Quoted 5 lines
fs/compat.c renamed from fs/compat.c~ioctl-rework-2 +5
-0+if (!filp->f_op) { + goto do_ioctl; + }else if (filp->f_op->compat_ioctl) { + error = filp->f_op->compat_ioctl (filp, cmd, arg); + goto out_fput;
Look, was this patch even tested?
MST
Re: [PATCH] deprecate (un)register_ioctl32_conversion
Quoted 3 lines
Stare at this as I might, I dont understand why does it make sence. So if
filp->f_opis NULL, you are then checkingfilp->f_op->ioctl? Looks like an oops to me.
I doesn't make sense, but fortunately files with NULL filp->f_op don't happen in practice (need to research whether it can't happen in theory either so we could lose lots of checks)
Quoted 8 lines
What should be there:
Review
Quoted 5 lines
(quoted diff) +5
-0+ if (!filp->f_op) { + goto do_ioctl; + } else if (filp->f_op->compat_ioctl) { + error = filp->f_op->compat_ioctl(filp, cmd, arg); + goto out_fput;
not correct either, see the incremental patch below.
Quoted 1 line
Look, was this patch even tested?
Yes.
fs/compat.c +4 -4
@@ -436,10 +436,10 @@if (!filp) goto out; -if (!filp->f_op) { -if (!filp->f_op->ioctl) - goto do_ioctl; - }else if (filp->f_op->compat_ioctl) { +if (!filp->f_op || !filp->f_op->ioctl) + goto do_ioctl; + +if (filp->f_op || filp->f_op->compat_ioctl) { error = filp->f_op->compat_ioctl (filp, cmd, arg); goto out_fput; }
Re: [PATCH] deprecate (un)register_ioctl32_conversion
Hello!
Quoting r. Christoph Hellwig ([email protected]) "Re: [PATCH] deprecate (un)register_ioctl32_conversion":
Quoted 7 lines
Quoted 3 lines
Stare at this as I might, I dont understand why does it make sence. So if
filp->f_opis NULL, you are then checkingfilp->f_op->ioctl? Looks like an oops to me.I doesn't make sense, but fortunately files with NULL
filp->f_opdon't happen in practice (need to research whether it can't happen in theory either so we could lose lots of checks)
Interesting. At least for character devices coming out of modules I think you dont - you need at least fops->owner.
Quoted 7 lines
fs/compat.c +0
-1@@ -436,10 +436,10 @@if (!filp) goto out; -if (!filp->f_op) {
fs/compat.c line 445
Quoted 10 lines
fs/compat.c +4
-3-if (!filp->f_op->ioctl) - goto do_ioctl; - }else if (filp->f_op->compat_ioctl) { +if (!filp->f_op || !filp->f_op->ioctl) + goto do_ioctl; + +if (filp->f_op || filp->f_op->compat_ioctl) { error = filp->f_op->compat_ioctl (filp, cmd, arg); goto out_fput; }
So now if I dont have ->ioctl the ioctl_compat wont be called. What if I only have unlocked_ioctl?
MST
Re: [PATCH] deprecate (un)register_ioctl32_conversion
Quoted 10 lines · Michael S. Tsirkin
Review
Quoted 7 lines
(quoted diff) +4
-0+ if (!filp->f_op || !filp->f_op->ioctl) + goto do_ioctl; + + if (filp->f_op || filp->f_op->compat_ioctl) { error = filp->f_op->compat_ioctl(filp, cmd, arg); goto out_fput; }So now if I dont have ->ioctl the
ioctl_compatwont be called. What if I only haveunlocked_ioctl?
Indeed. In my test setup I didn't have a driver using both. So let's think a little more what checks we want.
The original intention (pre-patch) was that without an ioctl entry we'd skip the hash table lookup and skip right to trying the few standard ioctls.
So with ->compat_ioctl we should try that one first, then checking for either ->ioctl or ->unlocked_ioctl beeing there. Like the patch below (this time it's actually untested because all my 64bit machines are in use):
fs/compat.c +5 -4
@@ -436,14 +436,15 @@if (!filp) goto out; -if (!filp->f_op) { -if (!filp->f_op->ioctl) - goto do_ioctl; - }else if (filp->f_op->compat_ioctl) { +if (filp->f_op && filp->f_op->compat_ioctl) { error = filp->f_op->compat_ioctl (filp, cmd, arg); goto out_fput; } +if (!filp->f_op || + (!filp->f_op->ioctl && !filp->f_op->unlocked_ioctl)) + goto do_ioctl; +down_read (&ioctl32_sem);for (t = ioctl32_hash_table[ioctl32_hash (cmd)]; t; t = t->next) {if (t->cmd == cmd)
Quoted 3 lines
MST
---end quoted text---
Re: [PATCH] deprecate (un)register_ioctl32_conversion
Hello!
Quoting r. Christoph Hellwig ([email protected]) "Re: [PATCH] deprecate (un)register_ioctl32_conversion":
Quoted 50 lines · Michael S. Tsirkin
Quoted 10 lines
Review
Quoted 7 lines
(quoted diff) +4
-0+ if (!filp->f_op || !filp->f_op->ioctl) + goto do_ioctl; + + if (filp->f_op || filp->f_op->compat_ioctl) { error = filp->f_op->compat_ioctl(filp, cmd, arg); goto out_fput; }So now if I dont have ->ioctl the
ioctl_compatwont be called. What if I only haveunlocked_ioctl?Indeed. In my test setup I didn't have a driver using both. So let's think a little more what checks we want.
The original intention (pre-patch) was that without an ioctl entry we'd skip the hash table lookup and skip right to trying the few standard ioctls.
So with ->compat_ioctl we should try that one first, then checking for either ->ioctl or ->unlocked_ioctl beeing there. Like the patch below (this time it's actually untested because all my 64bit machines are in use):
fs/compat.c +5
-4@@ -436,14 +436,15 @@if (!filp) goto out; -if (!filp->f_op) { -if (!filp->f_op->ioctl) - goto do_ioctl; - }else if (filp->f_op->compat_ioctl) { +if (filp->f_op && filp->f_op->compat_ioctl) { error = filp->f_op->compat_ioctl (filp, cmd, arg); goto out_fput; } +if (!filp->f_op || + (!filp->f_op->ioctl && !filp->f_op->unlocked_ioctl)) + goto do_ioctl; +down_read (&ioctl32_sem);for (t = ioctl32_hash_table[ioctl32_hash (cmd)]; t; t = t->next) {if (t->cmd == cmd)Quoted 3 lines
Quoted 2 lines
Quoted 1 line
MST
---end quoted text---
Amen to that. Since it conflicts with this change, here again is my patch to make it possible for the compat_ioctl to drop back on the standard conversions.
Applied on top of Christoph's last patch (above).
fs/compat.c +2 -1
@@ -431,9 +431,10 @@ asmlinkage long compat_sys_ioctl(unsigneif (!filp) goto out;if (filp->f_op && filp->f_op->compat_ioctl) { error = filp->f_op->compat_ioctl (filp, cmd, arg); - goto out_fput; +if (error != -ENOIOCTLCMD ) + goto out_fput; } if (!filp->f_op ||
fs/ioctl.c +3 -0
@@ -26,6 +26,9 @@ static long do_ioctl(struct file *filp,if (filp->f_op->unlocked_ioctl) { error = filp->f_op->unlocked_ioctl (filp, cmd, arg); +if (error == -ENOIOCTLCMD ) + error = -EINVAL ; + goto out; }else if (filp->f_op->ioctl) {lock_kernel (); error = filp->f_op->ioctl(filp->f_dentry->d_inode,
Re: [PATCH] deprecate (un)register_ioctl32_conversion
In reply to Christoph HellwigQuoted 8 lines · Christoph Hellwig
Quoted 4 lines · Michael S. Tsirkin
Hello, Andrew, all!
Since in -mm1 we now have a race-free replacement (that being
ioctl_compat), here is a patch to deprecate (un)register_ioctl32_conversion.Sorry, but this is a lot too early. Once there's a handfull users left in _mainline_ you can start deprecating it (or better remove it completely).
There were never more than a handful users of it anyways. So I think Michael's suggestion to deprecate it early is very reasonable.
Quoted 2 lines
So far we have a non-final version of the replacement in -mm and no single user converted.
For me it looks quite final.
-Andi
Re: [PATCH] deprecate (un)register_ioctl32_conversion
Quoted 5 lines · Andi Kleen
Quoted 3 lines · Christoph Hellwig
Quoted 2 lines · Michael S. Tsirkin
Hello, Andrew, all!
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Since in -mm1 we now have a race-free replacement (that being
ioctl_compat), here is a patch to deprecate (un)register_ioctl32_conversion.Sorry, but this is a lot too early. Once there's a handfull users left in _mainline_ you can start deprecating it (or better remove it completely).
There were never more than a handful users of it anyways. So I think Michael's suggestion to deprecate it early is very reasonable.
It's 72 callers in mainline. Aka 72 new warnings for an allmodconfig build. This isn't reasonable just because the interface got out of fashion.
Re: [PATCH] deprecate (un)register_ioctl32_conversion
In reply to Michael S. TsirkinAt Wed, 5 Jan 2005 16:40:43 +0200,
Quoted 5 lines · Michael S. Tsirkin
Hello, Andrew, all!
Since in -mm1 we now have a race-free replacement (that being
ioctl_compat), here is a patch to deprecate (un)register_ioctl32_conversion.
Good to see that ioctl_native and ioctl_compat ops are already there!
Will it be merged to 2.6.11? If so, I'll prepare the patch to convert the ALSA compat32 stuff, too...
Takashi
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
Re: [PATCH] deprecate (un)register_ioctl32_conversion
Quoted 4 lines · Takashi Iwai
At Wed, 5 Jan 2005 16:40:43 +0200,
Quoted 1 line · Michael S. Tsirkin
Quoted 8 lines
Quoted 4 lines
Hello, Andrew, all!
Since in -mm1 we now have a race-free replacement (that being
ioctl_compat), here is a patch to deprecate (un)register_ioctl32_conversion.Good to see that
ioctl_nativeandioctl_compatops are already there!Will it be merged to 2.6.11?
It should be, unless there's some problem. In maybe a week or so.
PATCH 1/1 macros to detect existance of unlocked_ioctl and ioctl_compat
Hello!
Quoting r. Andrew Morton ([email protected]) "Re: [PATCH] deprecate (un)register_ioctl32_conversion":
Quoted 7 lines
Quoted 6 lines · Takashi Iwai
At Wed, 5 Jan 2005 16:40:43 +0200,
Quoted 3 lines · Michael S. Tsirkin
Hello, Andrew, all!
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
Since in -mm1 we now have a race-free replacement (that being
ioctl_compat), here is a patch to deprecate (un)register_ioctl32_conversion.Good to see that
ioctl_nativeandioctl_compatops are already there!Will it be merged to 2.6.11?
It should be, unless there's some problem. In maybe a week or so.
To make life bearable for out-of kernel modules, the following patch adds 2 macros so that existance of unlocked_ioctl and ioctl_compat can be easily detected.
include/linux/fs.h renamed from include/linux/fs.h~ioctl-rework +6 -0
@@ -907,6 +907,12 @@ typedef struct {typedef int (*read_actor_t )(read_descriptor_t *,struct page *,unsigned long ,unsigned long ); +/* These macros are for out of kernel modules to test that +* the kernel supports the unlocked_ioctl and ioctl_compat +* fields in struct file_operations. */ +#define HAVE_IOCTL_COMPAT 1 +#define HAVE_UNLOCKED_IOCTL 1 +/* * NOTE: * read, write, poll, fsync, readv, writev can be called
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 5 lines · Michael S. Tsirkin
Quoted 1 line
It should be, unless there's some problem. In maybe a week or so.
To make life bearable for out-of kernel modules, the following patch adds 2 macros so that existance of
unlocked_ioctlandioctl_compatcan be easily detected.
That's not the way we're making additions. Get your code merged and there won't be any need to detect the feature.
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 9 lines · Christoph Hellwig
Quoted 5 lines · Michael S. Tsirkin
Quoted 1 line
It should be, unless there's some problem. In maybe a week or so.
To make life bearable for out-of kernel modules, the following patch adds 2 macros so that existance of
unlocked_ioctlandioctl_compatcan be easily detected.That's not the way we're making additions. Get your code merged and there won't be any need to detect the feature.
I would agree that it shouldn't be used for in tree code, but for out of tree code it is rather useful. There are other such feature macros for major driver interface changes too (e.g. in the network stack).
-Andi
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 3 lines · Andi Kleen
I would agree that it shouldn't be used for in tree code, but for out of tree code it is rather useful. There are other such feature macros for major driver interface changes too (e.g. in the network stack).
Which is the only place doing it. We had this discussion in the past (lastone I revolve Greg vetoed it). We simply shouldn't clutter our headers for the sake of out of tree drivers - with LINUX_VERSION_CODE we've already implemented a mechanism for out of tree drivers.
p.s. droppe alsa-devel from Cc because of the braindead moderation policy.
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 5 lines · Christoph Hellwig
Quoted 3 lines · Andi Kleen
I would agree that it shouldn't be used for in tree code, but for out of tree code it is rather useful. There are other such feature macros for major driver interface changes too (e.g. in the network stack).
Quoted 7 lines
Which is the only place doing it. We had this discussion in the past (lastone I revolve Greg vetoed it). We simply shouldn't clutter our headers for the sake of out of tree drivers - with
LINUX_VERSION_CODEwe've already implemented a mechanism for out of tree drivers.p.s. droppe alsa-devel from Cc because of the braindead moderation policy.
Um, alsa-devel is not moderated, we accept posts from non subscribers. Where do you think all the spam in our archive comes from?
Lee
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 5 lines · Lee Revell
Quoted 2 lines
p.s. droppe alsa-devel from Cc because of the braindead moderation policy.
Um, alsa-devel is not moderated, we accept posts from non subscribers. Where do you think all the spam in our archive comes from?
See the attached mail I got. Btw, where are the current alsa-devel archives? I tried to look things up a few times lately, but all archives linked off the websiste are either dead or totally outdated.
Quoted 1 line
From [email protected] Thu Jan 06 14:56:18 2005
Return-path: <[email protected]>
Envelope-to: [email protected]
Delivery-date: Thu, 06 Jan 2005 14:56:18 +0000
Received: from mx-outbound.sourceforge.net ([66.35.250.223])
by pentafluge.infradead.org with esmtp (Exim 4.42 #1 (Red Hat Linux)) id 1CmZ3h-0004tZ-A6 for [email protected]; Thu, 06 Jan 2005 14:56:18 +0000 Received: from projects.sourceforge.net (sc8-sf-list2-b.sourceforge.net [10.3.1.8]) by sc8-sf-spam1.sourceforge.net (Postfix) with ESMTP id 553EB88F8E for <[email protected]>; Thu, 6 Jan 2005 06:56:06 -0800 (PST)
Date: Thu, 06 Jan 2005 06:56:06 -0800
Subject: Your message to Alsa-devel awaits moderator approval
From: [email protected]
To: [email protected]
X-Ack: no
Sender: [email protected]
Errors-To: [email protected]
X-BeenThere: [email protected]
X-Mailman-Version: 2.0.9-sf.net
Precedence: bulk
List-Unsubscribe: <https://lists.sourceforge.net/lists/listinfo/alsa-devel>,
<mailto:[email protected]?subject=unsubscribe>
List-Id: Advanced Linux Sound Architecture - Devel <alsa-devel.lists.sourceforge.net>
List-Post: <mailto:[email protected]>
List-Help: <mailto:[email protected]?subject=help>
List-Subscribe: <https://lists.sourceforge.net/lists/listinfo/alsa-devel>,
<mailto:[email protected]?subject=subscribe>
List-Archive: <http://sourceforge.net/mailarchive/forum.php?forum=alsa-devel>
Message-Id: <[email protected]>
X-Spam-Score: 0.3 (/)
X-Spam-Report: SpamAssassin version 2.63 on pentafluge.infradead.org summary:
Content analysis details: (0.3 points, 5.0 required)
pts rule name description
---- ---------------------- --------------------------------------------------
0.3 NO_REAL_NAME From: does not include a real name
Status: RO
Content-Length: 351
Lines: 12
Your mail to 'Alsa-devel' with the subject
Re: [PATCH] deprecate (un)register_ioctl32_conversion
Is being held until the list moderator can review it for approval.
The reason it is being held:
Too many recipients to the message
Either the message will get posted to the list, or you will receive notification of the moderator's decision.
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 11 lines · Christoph Hellwig
Quoted 5 lines · Lee Revell
Quoted 2 lines
p.s. droppe alsa-devel from Cc because of the braindead moderation policy.
Um, alsa-devel is not moderated, we accept posts from non subscribers. Where do you think all the spam in our archive comes from?
See the attached mail I got. Btw, where are the current alsa-devel archives? I tried to look things up a few times lately, but all archives linked off the websiste are either dead or totally outdated.
OK, right, that's a problem. There's no reason for that policy. Perex, can you fix it?
The only working up to date archive I know of is the sourceforge one, not my favorite interface:
http://sourceforge.net/mailarchive/forum.php?forum_id=1752
Lee
A message that is not in the archive (sent off-list or not yet received): [email protected]
new home for alsa-devel archive? (was Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat)
[re-added alsa-devel to cc:]
Quoted 10 lines · Christoph Hellwig
Quoted 4 lines · Lee Revell
The only working up to date archive I know of is the sourceforge one, not my favorite interface:
Indeed, I'd even say it's horrible. Maybe Alsa folks could ask whether
http://marc.theaimsgroup.com/ could host the new alsa lists? They only have the dead really old list currently.
This would be great. I guess the first step is to find someone with a local copy of the archive, in mbox format, preferably despammed. I only have back to June. Anyone?
Lee
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
Re: new home for alsa-devel archive?
Quoted 9 lines · Lee Revell
[re-added alsa-devel to cc:]
Quoted 6 lines · Christoph Hellwig
Quoted 4 lines · Lee Revell
The only working up to date archive I know of is the sourceforge one, not my favorite interface:
Quoted 8 lines
Quoted 4 lines
Indeed, I'd even say it's horrible. Maybe Alsa folks could ask whether
http://marc.theaimsgroup.com/ could host the new alsa lists? They only have the dead really old list currently.This would be great. I guess the first step is to find someone with a local copy of the archive, in mbox format, preferably despammed. I only have back to June. Anyone?
There are archives at gmane, too. Not perfect but infinitely better than sf.net.
Signature · 9 lines
Måns Rullgård [email protected] ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
Re: Re: new home for alsa-devel archive?
Quoted 7 lines · Måns Rullgård
Quoted 6 lines · Lee Revell
[re-added alsa-devel to cc:]
Quoted 4 lines · Christoph Hellwig
Quoted 3 lines · Lee Revell
The only working up to date archive I know of is the sourceforge one, not my favorite interface:
http://sourceforge.net/mailarchive/forum.php?forum_id=1752
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Indeed, I'd even say it's horrible. Maybe Alsa folks could ask whether
http://marc.theaimsgroup.com/ could host the new alsa lists? They only have the dead really old list currently.This would be great. I guess the first step is to find someone with a local copy of the archive, in mbox format, preferably despammed. I only have back to June. Anyone?
There are archives at gmane, too. Not perfect but infinitely better than sf.net.
Sorry for jumping in late on this thread. I missed the beginning of it.
I'm not sure if anyone has expressed an opinion about mailman, but if the community is open to it I can offer techweb.rfa.org as a host for the lists and archives. We already host the portaudio list.
http://techweb.rfa.org/mailman/listinfo
Please CC me on any reply. I rarely have time to read alsa lists lately and might miss it otherwise.
-Eric Rz.
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
In reply to Christoph HellwigQuoted 3 lines · Christoph Hellwig
See the attached mail I got. Btw, where are the current alsa-devel archives? I tried to look things up a few times lately, but all archives linked off the websiste are either dead or totally outdated.
http://news.gmane.org/gmane.linux.alsa.devel/ (also available via NNTP).
Catalin
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
In reply to Christoph HellwigQuoted 7 lines · Christoph Hellwig
Quoted 3 lines · Andi Kleen
I would agree that it shouldn't be used for in tree code, but for out of tree code it is rather useful. There are other such feature macros for major driver interface changes too (e.g. in the network stack).
Which is the only place doing it. We had this discussion in the past (lastone I revolve Greg vetoed it). We simply shouldn't clutter our
I don't know who had this discussion and did this "decision", but for record I disagree.
Quoted 2 lines
headers for the sake of out of tree drivers - with
LINUX_VERSION_CODEwe've already implemented a mechanism for out of tree drivers.
That's incredibly ugly. I always hate these checks in source code because it's never clear what exactly they are testing for. And requires unreasonable work to find out when exactly the feature was added. And it doesn't really work when there are backports in older trees. In short there are many drawbacks. HAVE_* is much nicer.
-Andi
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
In reply to Christoph HellwigQuoted 9 lines · Christoph Hellwig
Quoted 3 lines · Andi Kleen
I would agree that it shouldn't be used for in tree code, but for out of tree code it is rather useful. There are other such feature macros for major driver interface changes too (e.g. in the network stack).
Which is the only place doing it. We had this discussion in the past (lastone I revolve Greg vetoed it). We simply shouldn't clutter our headers for the sake of out of tree drivers - with
LINUX_VERSION_CODEwe've already implemented a mechanism for out of tree drivers.
LINUX_VERSION_CODE never worked in last ~4 years as definite key to make decision about supported API. Vendors are porting stuff across releases, there exists additional trees like -mm, -wolk, -ac, and even if you look at the current example with deprecating register_ioctl32_conversion you'll find that it does not work:
2.6.10 kernel which presents itself as 0x02060A does have this, but does not have {compat,native}_ioctl.
2.6.10-mm2 kernel, which presents itself as 0x02060A too, has {compat,native}_ioctl, and also has register_ioctl32_conversion.
And there is intention to apply patch to 2.6.10-mmX which will present itself as 0x02060A again, will have {compat,native}_ioctl, and will either not have register_ioctl32_conversion at all, or will produce unfortunate unwanted annoying warning when this function is used.
So you'll have two 2.6.10 kernels, one says that register_ioctl32_conversion is only way to do things, and at same time it will say that register_ioctl32_conversion is deprecated. Strange, isn't it? Unfortunate? Maybe. Can this work with LINUX_VERSION_CODE? Definitely not without an additional checks on other things.
Same situation exists with pml4/pgd/pud I described in previous mail. You have 2.6.10 with pgd only, 2.6.10-bkWhatever with pgd/pud, and 2.6.10-mmX with pml4/pgd. This cannot be checked by LINUX_VERSION_CODE too...
Other changes usually add some #define which can be checked (like PUD_MASK or pml4_offset), but sometime it happens that no useful macro is created and test-compile is only way how to discover things (from past let's name epoll change backported from 2.5.x to 2.4.x-wolk, SKAS's change to do_mmap_pgoff prototype living in SUSE tree for a bit, or nopage's change in prototype around 2.6.1).
Best regards,
Petr Vandrovec [email protected]
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
In reply to Christoph HellwigQuoted 9 lines · Christoph Hellwig
Quoted 5 lines · Michael S. Tsirkin
Quoted 1 line
It should be, unless there's some problem. In maybe a week or so.
To make life bearable for out-of kernel modules, the following patch adds 2 macros so that existance of
unlocked_ioctlandioctl_compatcan be easily detected.That's not the way we're making additions. Get your code merged and there won't be any need to detect the feature.
When Greg made sysfs GPL only, I've asked whether it is possible to merge vmmon/vmnet in (and changing its license, of course). Answer on LKML was quite clear: no, you are not interested in having vmmon/vmnet in Linux kernel as you do not believe that they are usable for anything else than VMware.
So please tell me what I can do to satisfy you? You do not want our modules in kernel tree, and you do not want to allow us to detect kernel interface easily. Of course we can use autoconf-like scripts we are using for example to detect pml4/pgd vs. pgd/pud vs. pgd/pmd/pte vs. pmd/pte only, but each time you can detect feature by looking at flags and not by trying to build one source after another detection is simpler and more reliable.
BTW, vmmon will still require register_ioctl32_conversion as we are using (abusing) it to be able to issue 64bit ioctls from 32bit application. I assume that there is no supported way how to issue 64bit ioctls from 32bit aplication anymore after you disallow system-wide translations to be registered by modules.
Best regards,
Petr Vandrovec
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 4 lines · Petr Vandrovec
When Greg made sysfs GPL only, I've asked whether it is possible to merge vmmon/vmnet in (and changing its license, of course). Answer on LKML was quite clear: no, you are not interested in having vmmon/vmnet in Linux kernel as you do not believe that they are usable for anything else than VMware.
While I think there could be users, these users would probably come only after the code was GPLed, so this is kinda chicken & egg.
Quoted 6 lines
So please tell me what I can do to satisfy you? You do not want our modules in kernel tree, and you do not want to allow us to detect kernel interface easily. Of course we can use autoconf-like scripts we are using for example to detect pml4/pgd vs. pgd/pud vs. pgd/pmd/pte vs. pmd/pte only, but each time you can detect feature by looking at flags and not by trying to build one source after another detection is simpler and more reliable.
I don't care at all for non-opensource users, or small opensource glue for a big propritary user.
Quoted 5 lines
BTW, vmmon will still require
register_ioctl32_conversionas we are using (abusing) it to be able to issue 64bit ioctls from 32bit application. I assume that there is no supported way how to issue 64bit ioctls from 32bit aplication anymore after you disallow system-wide translations to be registered by modules.
Well, bad luck. You'll have to stop using undocumented hacks.
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
In reply to Petr VandrovecQuoted 5 lines · Petr Vandrovec
BTW, vmmon will still require
register_ioctl32_conversionas we are using (abusing) it to be able to issue 64bit ioctls from 32bit application. I assume that there is no supported way how to issue 64bit ioctls from 32bit aplication anymore after you disallow system-wide translations to be registered by modules.
Why are you issuing 64bit ioctls from 32bit applications?
-Andi
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 8 lines · Andi Kleen
Quoted 5 lines · Petr Vandrovec
BTW, vmmon will still require
register_ioctl32_conversionas we are using (abusing) it to be able to issue 64bit ioctls from 32bit application. I assume that there is no supported way how to issue 64bit ioctls from 32bit aplication anymore after you disallow system-wide translations to be registered by modules.Why are you issuing 64bit ioctls from 32bit applications?
There are three reasons (main reason is that vmware is 32bit app, but it is how things are currently laid out; even if there will be 64bit app, 32bit versions are already in use and people wants to use them on 64bit kernels):
* USB. usbfs API is written in a way which does not allow you to safely wrap it in "generic" 32->64 layer, and attempts to do it in non-generic way in usbfs code itself did not look feasible year ago. Even on current 64bit kernels it is not possible to issue raw USB operations from 32bit apps, and I do not believe that it is going to change - after all, just issuing ioctl through 64bit path from application which is aware of 64bit kernel is quite simple, much simpler than any attempt to make kernel dual-interface.
* parport interface, serial port: not all APIs were implemented in kernel. Current kernels do wrap all APIs vmware needs, but older kernels do not, and so we had to find some solution for older kernels too. Not so surprisingly, solution we had in place for USB works for them too...
* floppy: it is actually different from examples above, as FDRAWCMD command is supported by 32->64 layer, but it is supported incorrectly. Due to this all above started, as we had to make application aware of kernel it runs on, as FDRAWCMD on 32bit kernel returns 80 byte structure, while 104 byte on 64bit kernel, and you do not now which one you'll get until you call this ioctl... And once we had code in place, it was reused for USB and later for ppdev & serial.
So we added simple wrapper to vmmon which just gets {64bit-ioctl-number, 64bit-arg-argument} and passes it down to 64bit sys_ioctl:
/* Use weak: not all kernels export sys_ioctl for use by modules */ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 5, 66) asmlinkage __attribute__((weak)) longsys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg); #else
asmlinkage __attribute__((weak)) intsys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg); #endif
...
static int
LinuxDriver_Ioctl3264Passthrough(unsigned int fd, unsigned int iocmd,
unsigned long ioarg, struct file * filp)
{
VMIoctl64 cmd;
if (copy_from_user(&cmd, (VMIoctl64*)ioarg, sizeof(cmd))) {
return -EFAULT;
}
if (sys_ioctl) {
int err;#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 26) || \
(LINUX_VERSION_CODE >= KERNEL_VERSION(2, 5, 0) && LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 3))
err = sys_ioctl(fd, cmd.iocmd, cmd.ioarg);
#else
unlock_kernel();
err = sys_ioctl(fd, cmd.iocmd, cmd.ioarg);
lock_kernel();
#endif
return err; }
return -ENOTTY;
}
We were thinking about creating 64bit thread, and issuing 64bit syscalls from it, but it looked more fragile than code above.
Best regards,
Petr Vandrovec
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
[cc list trimmed]
Quoted 6 lines · Petr Vandrovec
Quoted 1 line
Why are you issuing 64bit ioctls from 32bit applications?
There are three reasons (main reason is that vmware is 32bit app, but it is how things are currently laid out; even if there will be 64bit app, 32bit versions are already in use and people wants to use them on 64bit kernels):
Quoted 7 lines
* USB. usbfs API is written in a way which does not allow you to safely wrap it in "generic" 32->64 layer, and attempts to do it in non-generic way in usbfs code itself did not look feasible year ago. Even on current 64bit kernels it is not possible to issue raw USB operations from 32bit apps, and I do not believe that it is going to change - after all, just issuing ioctl through 64bit path from application which is aware of 64bit kernel is quite simple, much simpler than any attempt to make kernel dual-interface.
Agree that's a problem. We just need an alternative interface here or I try to come up with an x86-64 specific hack (I think it's possible to do the compatibility x86-64 specific, just not in compat code for all architectures who have truly separated user/kernel address spaces)
I hope the USB people will eventually add a better interface here. Greg?
Quoted 6 lines
* parport interface, serial port: not all APIs were implemented in kernel. Current kernels do wrap all APIs vmware needs, but older kernels do not, and so we had to find some solution for older kernels too. Not so surprisingly, solution we had in place for USB works for them too...
But that's a non issue for the new kernels affected by the new ioctl interface.
Quoted 7 lines
* floppy: it is actually different from examples above, as FDRAWCMD command is supported by 32->64 layer, but it is supported incorrectly. Due to this all above started, as we had to make application aware of kernel it runs on, as FDRAWCMD on 32bit kernel returns 80 byte structure, while 104 byte on 64bit kernel, and you do not now which one you'll get until you call this ioctl... And once we had code in place, it was reused for USB and later for ppdev & serial.
Did you submit a patch for that? If not you should.
Quoted 2 lines
So we added simple wrapper to vmmon which just gets {64bit-ioctl-number, 64bit-arg-argument} and passes it down to 64bit
sys_ioctl:
The magic 64bit interface isn't a very good interface, don't expect that to be supported in the future.
-Andi
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 10 lines · Andi Kleen
[cc list trimmed]
Quoted 7 lines
* floppy: it is actually different from examples above, as FDRAWCMD command is supported by 32->64 layer, but it is supported incorrectly. Due to this all above started, as we had to make application aware of kernel it runs on, as FDRAWCMD on 32bit kernel returns 80 byte structure, while 104 byte on 64bit kernel, and you do not now which one you'll get until you call this ioctl... And once we had code in place, it was reused for USB and later for ppdev & serial.
Did you submit a patch for that? If not you should.
I hoped that floppies will die before... FDRAWCMD receives array of floppy_raw_cmd structures, and to find how many of these structures you have to peek into every of them to find whether there is next one or not, and structures itself contain pointers to other memory... I'll code up something during weekend.
Quoted 5 lines
Quoted 2 lines
So we added simple wrapper to vmmon which just gets {64bit-ioctl-number, 64bit-arg-argument} and passes it down to 64bit
sys_ioctl:The magic 64bit interface isn't a very good interface, don't expect that to be supported in the future.
With per-file compat_ioctl ipx ioctls (using SIOCPRIVATE+X range) could be made to work too, so only thing left for me is USB.
Petr Vandrovec
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
In reply to Andi KleenQuoted 17 lines · Andi Kleen
[cc list trimmed]
Quoted 6 lines · Petr Vandrovec
Quoted 1 line
Why are you issuing 64bit ioctls from 32bit applications?
There are three reasons (main reason is that vmware is 32bit app, but it is how things are currently laid out; even if there will be 64bit app, 32bit versions are already in use and people wants to use them on 64bit kernels):
Quoted 7 lines
* USB. usbfs API is written in a way which does not allow you to safely wrap it in "generic" 32->64 layer, and attempts to do it in non-generic way in usbfs code itself did not look feasible year ago. Even on current 64bit kernels it is not possible to issue raw USB operations from 32bit apps, and I do not believe that it is going to change - after all, just issuing ioctl through 64bit path from application which is aware of 64bit kernel is quite simple, much simpler than any attempt to make kernel dual-interface.
Quoted 7 lines
Agree that's a problem. We just need an alternative interface here or I try to come up with an x86-64 specific hack (I think it's possible to do the compatibility x86-64 specific, just not in compat code for all architectures who have truly separated user/kernel address spaces)
I hope the USB people will eventually add a better interface here. Greg?
Yes, we've been talking about a usbfs2 for a long time now, but no one has stepped up and done the work. It would look a lot like gadgetfs, which only has a limited number of ioctls needed for its operation.
But I don't see where the problem is unique to usbfs here, don't we properly use the 32->64bit ioctl conversion code to solve this kind of issue? Are we using it incorrectly?
thanks,
greg k-h
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 8 lines
Quoted 7 lines
Agree that's a problem. We just need an alternative interface here or I try to come up with an x86-64 specific hack (I think it's possible to do the compatibility x86-64 specific, just not in compat code for all architectures who have truly separated user/kernel address spaces)
I hope the USB people will eventually add a better interface here. Greg?
Quoted 7 lines
Yes, we've been talking about a usbfs2 for a long time now, but no one has stepped up and done the work. It would look a lot like gadgetfs, which only has a limited number of ioctls needed for its operation.
But I don't see where the problem is unique to usbfs here, don't we properly use the 32->64bit ioctl conversion code to solve this kind of issue? Are we using it incorrectly?
DaveM can probably give you more details since he tried unsucessfully to make it work. I think the problem is that there is no enough information for the compat layer to convert everything.
Here's his comment from fs/compat_ioctl.c.
On x86-64 it can be a bit easier because you can get away with only partially converting a data structure because the 32bit space is still visible from the kernel. But that doesn't work on some other archs.
-Andi
/* This needs more work before we can enable it. Unfortunately
* because of the fancy asynchronous way URB status/error is written
* back to userspace, we'll need to fiddle with USB devio internals
* and/or reimplement entirely the frontend of it ourselves. -DaveM *
* The issue is:
*
* When an URB is submitted via usbdevicefs it is put onto an * asynchronous queue. When the URB completes, it may be reaped * via another ioctl. During this reaping the status is written * back to userspace along with the length of the transfer. * * We must translate into 64-bit kernel types so we pass in a kernel * space copy of the usbdevfs_urb structure. This would mean that we * must do something to deal with the async entry reaping. First we * have to deal somehow with this transitory memory we've allocated. * This is problematic since there are many call sites from which the * async entries can be destroyed (and thus when we'd need to free up * this kernel memory). One of which is the close() op of usbdevicefs. * To handle that we'd need to make our own file_operations struct which * overrides usbdevicefs's release op with our own which runs usbdevicefs's * real release op then frees up the kernel memory. * * But how to keep track of these kernel buffers? We'd need to either * keep track of them in some table _or_ know about usbdevicefs internals * (ie. the exact layout of its file private, which is actually defined * in linux/usbdevice_fs.h, the layout of the async queues are private to * devio.c) * * There is one possible other solution I considered, also involving knowledge * of usbdevicefs internals: * * After an URB is submitted, we "fix up" the address back to the user * space one. This would work if the status/length fields written back * by the async URB completion lines up perfectly in the 32-bit type with * the 64-bit kernel type. Unfortunately, it does not because the iso * frame descriptors, at the end of the struct, can be written back.
*
* I think we'll just need to simply duplicate the devio URB engine here. */
David S. Miller
maintainerRe: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 3 lines · On Thu, 6 Jan 2005 20:51:44 +0100 Andi Kleen <[email protected]> wrote:
DaveM can probably give you more details since he tried unsucessfully to make it work. I think the problem is that there is no enough information for the compat layer to convert everything.
When the usbfs async stuff writes back the status, we are no longer within the original syscall/ioctl execution any more, therefore we don't know if we're doing this for a compat task or not.
Technically we could create a "is_compat_task()" type thing to check but Andi has always been against that and he's given good reasons. I tend to agree with him, especially in that there are valid cases where a compat task might want to make 64-bit system calls (f.e. to support 64-bit process debugging from a 32-bit binary, and this is not fantasy as sparc64 could support this right now)
As mentioned in the code comment, there are also memory management issues. We can cons up a temporary kernel buffer in order to convert the 32-bit structs into 64-bit ones the usbfs code expects, but then we have the issue of whether we can keep that buffer around during the entirety of the async operation and if so who in the world will free it up and how will they know to do so?
Finally there are complications wrt. using a kernel buffer in that we have to thus use set_fs(KERNEL_DS) in order for kernel buffers to be passed into the usbfs routine translated. This means that user space accesses of the actual user buffers wouldn't work, and we thus need to use temporary kernel buffers for that as well. This is also incompatible with the async nature of how usbfs wants to work.
I would suggest something that had a fixed sized and fixed layout status block. Something that doesn't change layout or size on any platform.
It's the pointers all over the place in the usbfs ioctl commands that causes all of the problems. If you split things up into, say, user buffer pointer/len struct and status block struct, it might be a lot easier to support this stuff. But I'm even skeptical about this working.
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 11 lines · David S. Miller
Quoted 3 lines · On Thu, 6 Jan 2005 20:51:44 +0100 Andi Kleen <[email protected]> wrote:
DaveM can probably give you more details since he tried unsucessfully to make it work. I think the problem is that there is no enough information for the compat layer to convert everything.
When the usbfs async stuff writes back the status, we are no longer within the original syscall/ioctl execution any more, therefore we don't know if we're doing this for a compat task or not.
[...]
Thanks Dave for the update. I misremembered and I don't think I can fix this up for x86-64. We'll need a new interface of some sort.
-Andi
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 13 lines · Andi Kleen
Quoted 11 lines · David S. Miller
Quoted 3 lines · On Thu, 6 Jan 2005 20:51:44 +0100 Andi Kleen <[email protected]> wrote:
DaveM can probably give you more details since he tried unsucessfully to make it work. I think the problem is that there is no enough information for the compat layer to convert everything.
When the usbfs async stuff writes back the status, we are no longer within the original syscall/ioctl execution any more, therefore we don't know if we're doing this for a compat task or not.
Quoted 4 lines
[...]
Thanks Dave for the update. I misremembered and I don't think I can fix this up for x86-64. We'll need a new interface of some sort.
Poor man way of doing this is just ripping ioctl-related code from usb's devio.c to separate file, and build this file twice, once for native_ioctl and 64bit urb structure, and once for compat_ioctl and 32bit urb structure.
I see no reason why it should not work for apps which submit & reap URBs through 32bit or 64bit API exclusively, without mixing them (and when you mix them, you'll get reasonable error that you did not submit specified URB).
Only problem is that after that USB code "knows" about 32bit API. But it is intention of compat_ioctl, no?
Petr
P.S.: When designing new API, please do not make it unnecessary complicated. USB video needs rather large bandwidth and low latency, so please no ASCII strings, and scatter-gather aware API helps a bit...
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 5 lines · Petr Vandrovec
Quoted 4 lines · Andi Kleen
Quoted 3 lines · David S. Miller
On Thu, 6 Jan 2005 20:51:44 +0100
Andi Kleen <[email protected]> wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
DaveM can probably give you more details since he tried unsucessfully to make it work. I think the problem is that there is no enough information for the compat layer to convert everything.
When the usbfs async stuff writes back the status, we are no longer within the original syscall/ioctl execution any more, therefore we don't know if we're doing this for a compat task or not.
Ick, yeah, now I remember...
Quoted 3 lines
P.S.: When designing new API, please do not make it unnecessary complicated. USB video needs rather large bandwidth and low latency, so please no ASCII strings, and scatter-gather aware API helps a bit...
In measurements published on linux-usb-devel, pure userspace calls using the current usbfs code generated almost full bandwidth usage (within the hardware limits). So adding the scatter-gather api interface to usbfs wouldn't really provide that much benefit.
And, we can always use help in designing such an API, if you could find someone at your company to help us out in doing so... :)
thanks,
greg k-h
Re: [linux-usb-devel] Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 8 lines · Greg KH
Quoted 3 lines
P.S.: When designing new API, please do not make it unnecessary complicated. USB video needs rather large bandwidth and low latency, so please no ASCII strings, and scatter-gather aware API helps a bit...In measurements published on linux-usb-devel, pure userspace calls using the current usbfs code generated almost full bandwidth usage (within the hardware limits). So adding the scatter-gather api interface to usbfs wouldn't really provide that much benefit.
Actually, the measurements I recall were using that nasty usbfs-specific async API ... or using huge buffers with the synchronous/blocking calls, so the hiccups added by scheduling latencies didn't kick in very often.
Quoted 2 lines
And, we can always use help in designing such an API, if you could find someone at your company to help us out in doing so... :)
Or just doing something like gadgetfs, where the standard Linux "libaio" calls work just fine. I was certainly able to stream 24 Mbyte/sec isochronous transfers (that's the top speed possible with one high speed ISO endpoint).
The key point is that one userspace IOCB should map directly to one URB in the kernel; and one userspace file (descriptor) should map to one USB endpoint. For a host side API, it turns out that isochronous URBs already have limited scatter/gather style support -- each one maps to several packets.
I think it'd be best to use the existing AIO support rather than have usbfs2 create yet another USB-specific thing.
- Dave
Re: [linux-usb-devel] Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 10 lines · David Brownell
Quoted 8 lines · Greg KH
Quoted 3 lines
P.S.: ?When designing new API, please do not make it unnecessary complicated. USB video needs rather large bandwidth and low latency, so please no ASCII strings, and scatter-gather aware API helps a bit...In measurements published on linux-usb-devel, pure userspace calls using the current usbfs code generated almost full bandwidth usage (within the hardware limits). ?So adding the scatter-gather api interface to usbfs wouldn't really provide that much benefit.
Quoted 5 lines
Actually, the measurements I recall were using that nasty usbfs-specific async API ... or using huge buffers with the synchronous/blocking calls, so the hiccups added by scheduling latencies didn't kick in very often.
Ah, yeah, that's true.
Quoted 8 lines
Quoted 2 lines
And, we can always use help in designing such an API, if you could find someone at your company to help us out in doing so... :)
Or just doing something like gadgetfs, where the standard Linux "libaio" calls work just fine. I was certainly able to stream 24 Mbyte/sec isochronous transfers (that's the top speed possible with one high speed ISO endpoint).
Quoted 8 lines
The key point is that one userspace IOCB should map directly to one URB in the kernel; and one userspace file (descriptor) should map to one USB endpoint. For a host side API, it turns out that isochronous URBs already have limited scatter/gather style support -- each one maps to several packets.
I think it'd be best to use the existing AIO support rather than have usbfs2 create yet another USB-specific thing.
I completely agree.
greg k-h
Re: [discuss] Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
In reply to Andi KleenQuoted 8 lines · Andi Kleen
Quoted 7 lines
* USB. usbfs API is written in a way which does not allow you to safely wrap it in "generic" 32->64 layer, and attempts to do it in non-generic way in usbfs code itself did not look feasible year ago. Even on current 64bit kernels it is not possible to issue raw USB operations from 32bit apps, and I do not believe that it is going to change - after all, just issuing ioctl through 64bit path from application which is aware of 64bit kernel is quite simple, much simpler than any attempt to make kernel dual-interface.
Quoted 7 lines
Agree that's a problem. We just need an alternative interface here or I try to come up with an x86-64 specific hack (I think it's possible to do the compatibility x86-64 specific, just not in compat code for all architectures who have truly separated user/kernel address spaces)
I hope the USB people will eventually add a better interface here. Greg?
As a quick fix, wouldn't it be easy enough to just mark USBDEVFS_IOCTL as COMPATIBLE_IOCTL()? The number is actually different for 32 and 64 bit kernels, so a 32 bit application that knows about this could use 64 bit data structures and then just call ioctl(fd, USBDEVFS_IOCTL64, data) instead of using a weird hack to achieve exactly the same.
Applications trying to call the 32 bit USBDEVFS_IOCTL would still see -EINVAL because there is no wrapper for this.
Maybe the same can be done for some of the other ioctl calls. It effectively means moving part of the compat layer to user space from fs/compat_ioctl.c, but it appears that applications are already doing this.
Arnd <><
Re: [discuss] Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
Quoted 10 lines
As a quick fix, wouldn't it be easy enough to just mark
USBDEVFS_IOCTLasCOMPATIBLE_IOCTL()? The number is actually different for 32 and 64 bit kernels, so a 32 bit application that knows about this could use 64 bit data structures and then just callioctl(fd, USBDEVFS_IOCTL64, data)instead of using a weird hack to achieve exactly the same.
Applications trying to call the 32 bitUSBDEVFS_IOCTLwould still see-EINVALbecause there is no wrapper for this.
Maybe the same can be done for some of the other ioctl calls. It effectively means moving part of the compat layer to user space fromfs/compat_ioctl.c, but it appears that applications are already doing this.
That's too ugly. We would end up with different ABIs. I don't really want to do that, no.
-Andi
Re: [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat
In reply to Petr VandrovecHi!
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 1 line
It should be, unless there's some problem. In maybe a week or so.
To make life bearable for out-of kernel modules, the following patch adds 2 macros so that existance of
unlocked_ioctlandioctl_compatcan be easily detected.
Quoted 8 lines
Quoted 2 lines
That's not the way we're making additions. Get your code merged and there won't be any need to detect the feature.
When Greg made sysfs GPL only, I've asked whether it is possible to merge vmmon/vmnet in (and changing its license, of course). Answer on LKML was quite clear: no, you are not interested in having vmmon/vmnet in Linux kernel as you do not believe that they are usable for anything else than VMware.
What about
1) Put vmmon/vmnet under GPL
2) Find some GPL user of vmmon/vmnet
3) Merge should be doable now
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
PATCH 1/1 fix: macros to detect existance of unlocked_ioctl and compat_ioctl
In reply to Michael S. TsirkinHi!
I just noticed that my original patch says "ioctl_compat" all over the place while the actual field name in -mm2 is "compat_ioctl". Doh. Here's a replacement patch.
PS. Please dont flame me, I do not maintain out of kernel modules, myself :)
To make life bearable for out-of kernel modules, the following patch adds 2 macros so that existance of unlocked_ioctl and compat_ioctl can be easily detected.
include/linux/fs.h renamed from include/linux/fs.h~ioctl-rework +6 -0
@@ -907,6 +907,12 @@ typedef struct {typedef int (*read_actor_t )(read_descriptor_t *,struct page *,unsigned long ,unsigned long ); +/* These macros are for out of kernel modules to test that +* the kernel supports the unlocked_ioctl and compat_ioctl +* fields in struct file_operations. */ +#define HAVE_COMPAT_IOCTL 1 +#define HAVE_UNLOCKED_IOCTL 1 +/* * NOTE: * read, write, poll, fsync, readv, writev can be called
Re: [PATCH] fix: macros to detect existance of unlocked_ioctl and compat_ioctl
Quoted 10 lines · Michael S. Tsirkin
To make life bearable for out-of kernel modules, the following patch adds 2 macros so that existance of
unlocked_ioctlandcompat_ioctlcan be easily detected.Signed-off-by Michael S. Tsirkin <[email protected]>diff -puN
include/linux/fs.h~ioctl-reworkinclude/linux/fs.h
include/linux/fs.h typedef struct { · line 914
Quoted 8 lines
include/linux/fs.h renamed from include/linux/fs.h~ioctl-rework +5
-0@@ -907,6 +907,12 @@ typedef struct {typedef int (*read_actor_t )(read_descriptor_t *,struct page *,unsigned long ,unsigned long ); +/* These macros are for out of kernel modules to test that +* the kernel supports the unlocked_ioctl and compat_ioctl +* fields in struct file_operations. */ +#define HAVE_COMPAT_IOCTL 1 +#define HAVE_UNLOCKED_IOCTL 1
No, we do not do that in the kernel today, and I'm pretty sure we don't want to start doing it (it would get _huge_ very quickly...)
Please don't apply this. Remember, out-of-the-tree modules are on their own.
thanks,
greg k-h
Re: [PATCH] fix: macros to detect existance of unlocked_ioctl and compat_ioctl
Quoted 1 line
No, we do not do that in the kernel today, and I'm pretty sure we don't
Actually we do. e.g. take a look at skbuff.h HAVE_* There are other examples too.
Quoted 1 line
want to start doing it (it would get _huge_ very quickly...)
I disagree since the alternative is so ugly.
Quoted 2 lines
Please don't apply this. Remember, out-of-the-tree modules are on their own.
I don't know who made this "policy", but actively sabotating or denying useful facilities to free out of tree modules doesn't seem to be a very wise policy to me.
-Andi
Re: [PATCH] fix: macros to detect existance of unlocked_ioctl and compat_ioctl
Quoted 8 lines · Andi Kleen
Quoted 1 line
No, we do not do that in the kernel today, and I'm pretty sure we don't
Actually we do. e.g. take a look at
skbuff.hHAVE_* There are other examples too.Quoted 1 line
want to start doing it (it would get _huge_ very quickly...)
I disagree since the alternative is so ugly.
But the main problem with this is, when do we start deleting the HAVE_ symbols? After a relativly short period of time, they become useless, as all kernels of the past year or two have that feature, and why even test for it?
I agree, that for short term, vendor-patched kernels, it's nice to have something like that to try to build your out-of-the-tree module. But move to get that module into the tree, or provide your favorite vendor with the properly patched driver (hey, I can dream...)
And is the alternative (using autoconf to build tiny modules testing for different features) that ugly? Yeah, I hate autoconf too, but I thought that work (kernel feature testing in autoconf) has already been done, right?
Quoted 6 lines
Quoted 2 lines
Please don't apply this. Remember, out-of-the-tree modules are on their own.
I don't know who made this "policy", but actively sabotating or denying useful facilities to free out of tree modules doesn't seem to be a very wise policy to me.
I'm not trying to sabotage anything, I just don't want the maintaince of a zillion HAVE_ macros to slowly overrun us until we drown under the weight. All to support some looney, ill-informed vendor that can never get around to submitting their driver to mainline.
And as for that "policy", it's been stated in public by Andrew and Linus and me (if I count for anything, doubtful...) a number of documented times.
thanks,
greg k-h
Re: [PATCH] fix: macros to detect existance of unlocked_ioctl and compat_ioctl
Quoted 7 lines · Greg KH
Quoted 5 lines · Andi Kleen
Quoted 1 line
No, we do not do that in the kernel today, and I'm pretty sure we don't
Actually we do. e.g. take a look at
skbuff.hHAVE_* There are other examples too.
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
want to start doing it (it would get _huge_ very quickly...)
I disagree since the alternative is so ugly.
But the main problem with this is, when do we start deleting the
HAVE_symbols?
This is a self-correcting system. If the symbols are so offensive, someone will get offended and will submit a patch to delete them at the appropriate time. If they're not so offensive then we've nothing to care about.
Quoted 4 lines
...
And as for that "policy", it's been stated in public by Andrew and Linus and me (if I count for anything, doubtful...) a number of documented times.
not me ;) It's two lines of code and makes things much simpler for the users of our work. Seems a no-brainer.
And practically speaking, we don't make such fundamental driver-visible changes _that_ often - if we end up getting buried under a proliferation of HAVE_FOO macros, then the presence of the macros is the least of our problems, yes?
Re: [PATCH] fix: macros to detect existance of unlocked_ioctl and compat_ioctl
Quoted 8 lines · Andrew Morton
Quoted 4 lines · Greg KH
...
And as for that "policy", it's been stated in public by Andrew and Linus and me (if I count for anything, doubtful...) a number of documented times.not me ;) It's two lines of code and makes things much simpler for the users of our work. Seems a no-brainer.
Sorry, the "policy" I was referring to was the "out-of-the-tree drivers are on their own" statement. Not the use of the HAVE macros.
Quoted 4 lines
And practically speaking, we don't make such fundamental driver-visible changes _that_ often - if we end up getting buried under a proliferation of
HAVE_FOOmacros, then the presence of the macros is the least of our problems, yes?
Ok, but can someone add a section in the feature-removal-schedule.txt file about when these specific macros will be removed? They must be created with some specific use in mind, right?
thanks,
greg k-h
Re: [PATCH] fix: macros to detect existance of unlocked_ioctl and compat_ioctl
[ Cc:s trimmed a little ]
Quoted 2 lines · Greg KH
Sorry, the "policy" I was referring to was the "out-of-the-tree drivers are on their own" statement. Not the use of the HAVE macros.
Not all users of kernel code are in- or out-of-tree drivers and the like. E.g. tcsim (from tcng.sf.net) grabs substantial portions of the traffic control and netlink code and merges them with user space. It also tries to be compatible with most 2.4 kernels.
For feature tests, I use basically anything that doesn't run away quickly enough. And I'm sure you want none of *that* kind of code anywhere near mainline ;-)
Not that I currently have more troubles with it than usually. I just want to point out that there are other, strange but legitimate (at least in the "all shall eventually be GPL" sense) users of the kernel, who don't mind a friendly environment.
- Werner
Signature · 3 lines
_________________________________________________________________________ / Werner Almesberger, Buenos Aires, Argentina [email protected] / /_http://www.almesberger.net/____________________________________________/
Re: [PATCH] fix: macros to detect existance of unlocked_ioctl and compat_ioctl
In reply to Greg KHQuoted 23 lines · Greg KH
Quoted 10 lines · Michael S. Tsirkin
To make life bearable for out-of kernel modules, the following patch adds 2 macros so that existance of
unlocked_ioctlandcompat_ioctlcan be easily detected.Signed-off-by Michael S. Tsirkin <[email protected]>diff -puN
include/linux/fs.h~ioctl-reworkinclude/linux/fs.hinclude/linux/fs.h typedef struct { · line 914
Quoted 8 lines
include/linux/fs.h renamed from include/linux/fs.h~ioctl-rework +5
-0@@ -907,6 +907,12 @@ typedef struct {typedef int (*read_actor_t )(read_descriptor_t *,struct page *,unsigned long ,unsigned long ); +/* These macros are for out of kernel modules to test that +* the kernel supports the unlocked_ioctl and compat_ioctl +* fields in struct file_operations. */ +#define HAVE_COMPAT_IOCTL 1 +#define HAVE_UNLOCKED_IOCTL 1No, we do not do that in the kernel today, and I'm pretty sure we don't want to start doing it (it would get _huge_ very quickly...)
Quoted 2 lines
Please don't apply this. Remember, out-of-the-tree modules are on their own.
Gee, thanks. It's not like some out-of-tree code doesn't _want_ to go into the core kernel, but usually the time between some code being developed and when it is included is lengthy (i.e. "this feature won't be accepted until lots of people use it").
You can't claim that this has never been done (e.g. KERNEL_HAS_O_DIRECT, KERNEL_HAS_DIRECT_FILEIO in 2.4 kernels). For code that needs to handle multiple kernel versions this makes life far easier and doesn't actually hurt anything. It used to be that you could use LINUX_VERSION_CODE for this kind of check, but that breaks down quickly with vendor kernels and the long development cycle.
Cheers, Andreas
--
Andreas Dilger
http://sourceforge.net/projects/ext2resize/
http://members.shaw.ca/adilger/ http://members.shaw.ca/golinux/
Re: [PATCH] fix: macros to detect existance of unlocked_ioctl and compat_ioctl
Quoted 24 lines · Andreas Dilger
Quoted 23 lines · Greg KH
Quoted 10 lines · Michael S. Tsirkin
To make life bearable for out-of kernel modules, the following patch adds 2 macros so that existance of
unlocked_ioctlandcompat_ioctlcan be easily detected.Signed-off-by Michael S. Tsirkin <[email protected]>diff -puN
include/linux/fs.h~ioctl-reworkinclude/linux/fs.hinclude/linux/fs.h typedef struct { · line 914
Quoted 8 lines
include/linux/fs.h renamed from include/linux/fs.h~ioctl-rework +5
-0@@ -907,6 +907,12 @@ typedef struct {typedef int (*read_actor_t )(read_descriptor_t *,struct page *,unsigned long ,unsigned long ); +/* These macros are for out of kernel modules to test that +* the kernel supports the unlocked_ioctl and compat_ioctl +* fields in struct file_operations. */ +#define HAVE_COMPAT_IOCTL 1 +#define HAVE_UNLOCKED_IOCTL 1No, we do not do that in the kernel today, and I'm pretty sure we don't want to start doing it (it would get _huge_ very quickly...)
Quoted 7 lines
Quoted 2 lines
Please don't apply this. Remember, out-of-the-tree modules are on their own.
Gee, thanks. It's not like some out-of-tree code doesn't _want_ to go into the core kernel, but usually the time between some code being developed and when it is included is lengthy (i.e. "this feature won't be accepted until lots of people use it").
I understand that, but for stuff like that, isn't it easier to just test for VERSION? Or use autoconf?
Quoted 2 lines
You can't claim that this has never been done (e.g.
KERNEL_HAS_O_DIRECT,KERNEL_HAS_DIRECT_FILEIOin 2.4 kernels).
That was because of the backport mess that 2.4 went through and vendor kernels, right?
Quoted 5 lines
For code that needs to handle
multiple kernel versions this makes life far easier and doesn't actually hurt anything. It used to be that you could useLINUX_VERSION_CODEfor this kind of check, but that breaks down quickly with vendor kernels and the long development cycle.
What long development cycle? The out-of-the-tree stuff? Or the kernel development stuff?
My main issue is when would we ever be able to remove such HAS macros?
And who specifically will be testing for these HAVE_COMPAT_IOCTL and HAVE_UNLOCKED_IOCTL macros? Will that code make it into the main tree ever? If not, why not?
thanks,
greg k-h
Re: [PATCH] fix: macros to detect existance of unlocked_ioctl and compat_ioctl
At Wed, 12 Jan 2005 14:58:19 -0800,
Quoted 37 lines · Greg KH
Quoted 24 lines · Andreas Dilger
Quoted 23 lines · Greg KH
Quoted 10 lines · Michael S. Tsirkin
To make life bearable for out-of kernel modules, the following patch adds 2 macros so that existance of
unlocked_ioctlandcompat_ioctlcan be easily detected.Signed-off-by Michael S. Tsirkin <[email protected]>diff -puN
include/linux/fs.h~ioctl-reworkinclude/linux/fs.hinclude/linux/fs.h typedef struct { · line 914
Quoted 8 lines
include/linux/fs.h renamed from include/linux/fs.h~ioctl-rework +5
-0@@ -907,6 +907,12 @@ typedef struct {typedef int (*read_actor_t )(read_descriptor_t *,struct page *,unsigned long ,unsigned long ); +/* These macros are for out of kernel modules to test that +* the kernel supports the unlocked_ioctl and compat_ioctl +* fields in struct file_operations. */ +#define HAVE_COMPAT_IOCTL 1 +#define HAVE_UNLOCKED_IOCTL 1No, we do not do that in the kernel today, and I'm pretty sure we don't want to start doing it (it would get _huge_ very quickly...)
Quoted 7 lines
Quoted 2 lines
Please don't apply this. Remember, out-of-the-tree modules are on their own.
Gee, thanks. It's not like some out-of-tree code doesn't _want_ to go into the core kernel, but usually the time between some code being developed and when it is included is lengthy (i.e. "this feature won't be accepted until lots of people use it").
I understand that, but for stuff like that, isn't it easier to just test for VERSION? Or use autoconf?
Quoted 8 lines
Quoted 5 lines
For code that needs to handle
multiple kernel versions this makes life far easier and doesn't actually hurt anything. It used to be that you could useLINUX_VERSION_CODEfor this kind of check, but that breaks down quickly with vendor kernels and the long development cycle.What long development cycle? The out-of-the-tree stuff? Or the kernel development stuff?
I guess the latter. Imagine that the stuff already exists in mm tree but the merge to the maintree is delayed. In this case, KERNEL_VERSION check doesn't work reliably. But, it's a rare case, AFAIK.
Quoted 1 line
My main issue is when would we ever be able to remove such HAS macros?
Here I agree with Greg. It'll be difficult to remove it once after added. Nobody knows whether the external stuff still refers to it or not...
Quoted 3 lines
And who specifically will be testing for these
HAVE_COMPAT_IOCTLandHAVE_UNLOCKED_IOCTLmacros? Will that code make it into the main tree ever? If not, why not?
ALSA, for example, still offers for 2.2, 2.4 and older 2.6 kernels. So it requires checks for such kernel API changes. I would do this via autoconf without problem if HAS_* isn't introduced, though.
Takashi
2.6.10-mm2
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10-mm2/
- Various minorish updates and fixes
Changes since 2.6.10-mm1:
linus.patch
bk-acpi.patch
bk-alsa.patch
bk-arm.patch
bk-cifs.patch
bk-cpufreq.patch
bk-drm-via.patch
bk-i2c.patch
bk-ia64.patch
bk-ide-dev.patch
bk-dtor-input.patch
bk-kconfig.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-scsi.patch
Latext versions of various bk trees.
-expose-reiserfs_sync_fs.patch
-fix-reiserfs-quota-debug-messages.patch
-fix-of-quota-deadlock-on-pagelock-quota-core.patch
-vfs_quota_off-oops-fix.patch
-quota-umount-race-fix.patch
-fix-of-quota-deadlock-on-pagelock-ext2.patch
-fix-of-quota-deadlock-on-pagelock-ext2-tweaks.patch
-fix-of-quota-deadlock-on-pagelock-ext3.patch
-fix-of-quota-deadlock-on-pagelock-ext3-tweaks.patch
-fix-of-quota-deadlock-on-pagelock-reiserfs.patch
-fix-of-quota-deadlock-on-pagelock-reiserfs-fix.patch -reiserfs-bug-fix-do-not-clear-ms_active-mount-flag.patch
-allow-disabling-quota-messages-to-console.patch
-vmscan-total_scanned-fix.patch
-cs461x-gameport-code-isnt-being-included-in-build.patch
-mm-keep-count-of-free-areas.patch
-mm-higher-order-watermarks.patch
-mm-higher-order-watermarks-fix.patch
-mm-teach-kswapd-about-higher-order-areas.patch
-simplified-readahead.patch
-simplified-readahead-fix.patch
-simplified-readahead-cleanups.patch
-readahead-congestion-control.patch
-mempolicy-optimization.patch
-mm-overcommit-updates.patch
-kill-off-highmem_start_page.patch
-make-sure-ioremap-only-tests-valid-addresses.patch
-mark_page_accessed-for-reads-on-non-page-boundaries.patch
-do_anonymous_page-use-setpagereferenced.patch
-slab-add-more-arch-overrides-to-control-object-alignment.patch -collect-page_states-only-from-online-cpus.patch
-collect-page_states-only-from-online-cpus-tidy.patch
-alloc_large_system_hash-numa-interleaving.patch
-filesystem-hashes-numa-interleaving.patch
-tcp-hashes-numa-interleaving.patch
-netfilter-fix-return-values-of-ipt_recent-checkentry.patch -netfilter-fix-ip_conntrack_proto_sctp-exit-on-sysctl.patch -netfilter-fix-ip_ct_selective_cleanup-and-rename.patch -netfilter-add-comment-above-remove_expectations-in.patch -netfilter-remove-ipchains-and-ipfwadm-compatibility.patch -netfilter-remove-copy_to_user-warnings-in-netfilter.patch -netfilter-fix-cleanup-in-ipt_recent-should-ipt_registrater_match-error.patch -fix-broken-rst-handling-in-ip_conntrack.patch
-ppc32-freescale-book-e-mmu-cleanup.patch
-ppc32-refactor-common-book-e-exception-code.patch
-ppc32-switch-to-kbuild_defconfig.patch
-ppc32-marvell-host-bridge-support-mv64x60.patch
-ppc32-marvell-host-bridge-support-mv64x60-review-fixes.patch -ppc32-support-for-marvell-ev-64260-bp-eval-platform.patch
-ppc32-support-for-force-cpci-690-board.patch
-ppc32-support-for-artesyn-katana-cpci-boards.patch -ppc32-add-support-for-ibm-750fx-and-750gx-eval-boards.patch
-ppc32-ppc4xx-pic-rewrite-cleanup.patch
-ppc32-performance-monitor-oprofile-support-for-e500.patch -ppc32-performance-monitor-oprofile-support-for-e500-review-fixes.patch
-ppc32-fix-ebonyc-warnings.patch
-ppc32-remove-bogus-sprn_cpc0_gpio-define.patch
-ppc32-debug-setcontext-syscall-implementation.patch
-ppc32-add-uimage-to-default-targets.patch
-ppc32-fix-io_remap_page_range-for-36-bit-phys-platforms.patch -ppc32-resurrect-documentation-powerpc-cpu_featurestxt.patch
-ppc64-kprobes-implementation.patch
-ppc64-tweaks-to-cpu-sysfs-information.patch
-kprobes-wrapper-to-define-jprobeentry.patch
-termio-userspace-access-error-handling.patch
-ide_arch_obsolete_init-fix.patch
-out-of-line-implementation-of-find_next_bit.patch
-gp-rel-data-support.patch
-gp-rel-data-support-vs-bk-kbuild-fix.patch
-vm-routine-fixes.patch
-vm-routine-fixes-CONFIG_SHMEM-fix.patch
-frv-fujitsu-fr-v-cpu-arch-maintainer-record.patch
-frv-fujitsu-fr-v-arch-documentation.patch
-frv-fujitsu-fr-v-cpu-arch-implementation-part-1.patch
-frv-fujitsu-fr-v-cpu-arch-implementation-part-2.patch
-frv-fujitsu-fr-v-cpu-arch-implementation-part-3.patch
-frv-fujitsu-fr-v-cpu-arch-implementation-part-4.patch
-frv-fujitsu-fr-v-cpu-arch-implementation-part-5.patch
-frv-fujitsu-fr-v-cpu-arch-implementation-part-6.patch
-frv-fujitsu-fr-v-cpu-arch-implementation-part-7.patch
-frv-fujitsu-fr-v-cpu-arch-implementation-part-8.patch
-frv-fujitsu-fr-v-cpu-arch-implementation-part-9.patch -put-memory-in-dma-zone-not-normal-zone-in-frv-arch.patch
-frv-kill-off-highmem_start_page.patch
-frv-first-batch-of-fujitsu-fr-v-arch-include-files.patch -frv-remove-obsolete-hardirq-stuff-from-includes.patch
-frv-pci-dma-fixes.patch
-fix-frv-pci-config-space-write.patch
-frv-more-fujitsu-fr-v-arch-include-files.patch
-convert-frv-to-use-remap_pfn_range.patch
-frv-yet-more-fujitsu-fr-v-arch-include-files.patch
-frv-remaining-fujitsu-fr-v-arch-include-files.patch
-frv-make-calibrate_delay-optional.patch
-frv-better-mmap-support-in-uclinux.patch
-frv-procfs-changes-for-nommu-changes.patch
-frv-change-setup_arg_pages-to-take-stack-pointer.patch -frv-change-setup_arg_pages-to-take-stack-pointer-fixes.patch
-frv-add-fdpic-elf-binary-format-driver.patch
-fix-some-elf-fdpic-binfmt-problems.patch
-further-nommu-changes.patch
-further-nommu-proc-changes.patch
-frv-arch-nommu-changes.patch
-make-more-syscalls-available-for-the-fr-v-arch.patch
-frv-debugging-fixes.patch
-frv-minix-ext2-bitops-fixes.patch
-frv-perfctr_info-syscall.patch
-frv-update-the-trap-tables-comment.patch
-frv-accidental-tlb-entry-write-protect-fix.patch
-frv-pagetable-handling-fixes.patch
-frv-fr55x-cpu-support-fixes.patch
-implement-nommu-find_vma.patch
-fix-nommu-map_shared-handling.patch
-permit-nommu-map_shared-of-memory-backed-files.patch
-cross-reference-nommu-vmas-with-mappings.patch
-assign-pkmap_base-dynamically.patch
-x86-remove-data-header-and-code-overlap-in-boot-setups.patch
-cyrix-mii-cpuid-returns-stale-%ecx.patch
-nx-fix-noexec-kernel-parameter.patch
-nx-triple-fault-with-4k-kernel-mappings-and-pae.patch
-trivial-cleanup-in-arch-i386-kernel-heads.patch
-remove-pfn_to_pgdat-on-x86.patch
-boot_ap_for_nondefault_kernel.patch
-i386-boot-loader-ids.patch
-proc-sys-kernel-bootloader_type.patch
-intel-thermal-monitor-for-x86_64.patch
-x86_64-do_general_protection-retval-check.patch
-x86_64-add-a-real-pfn_valid.patch
-x86_64-fix-bugs-in-the-amd-k8-cmp-support-code.patch -x86_64-fix-bugs-in-the-amd-k8-cmp-support-code-fix.patch
-x86_64-reenable-mga-dri-on-x86-64.patch
-x86_64-remove-duplicated-fake_stack_frame-macro.patch
-x86_64-remove-bios-reboot-code.patch
-x86_64-add-reboot=force.patch
-x86_64-collected-ioremap-fixes.patch
-x86_64-handle-nx-correctly-in-pageattr.patch
-x86_64-split-acpi-boot-table-parsing.patch
-x86_64-split-acpi-boot-table-parsing-fix.patch
-x86_64-add-srat-numa-discovery-to-x86-64.patch
-x86_64-update-uptime-after-suspend.patch
-x86_64-allow-a-kernel-debugger-to-hide-single-steps-in.patch -x86_64-remove-debug-information-for-vsyscalls.patch
-x86_64-rename-htvalid-to-cmp_legacy.patch
-x86_64-scheduler-support-for-amd-cmp.patch
-x86_64-add-a-missing-__iomem-pointed-out-by-linus.patch
-x86_64-add-a-missing-newline-in-proc-cpuinfo.patch
-x86_64-always-print-segfaults-for-init.patch
-x86_64-export-phys_proc_id.patch
-x86_64-allow-to-configure-more-cpus-and-nodes.patch
-x86_64-allow-to-configure-more-cpus-and-nodes-fix.patch -x86_64-fix-a-warning-in-the-cmp-support-code-for.patch -x86_64-fix-some-outdated-assumptions-that-cpu-numbers.patch
-x86_64-fix-em64t-config-description.patch
-x86_64-remove-unneeded-ifdef-in-hardirqh.patch
-x86_64-add-slit-inter-node-distance-information-to.patch -x86_64-add-x86_64-support-for-jack-steiners-slit-sysfs.patch -x86_64-eliminate-some-useless-printks-in-acpi-numac.patch
-h8-300-new-systemcall-support.patch
-arm26-remove-arm32-cruft.patch
-arm26-update-the-atomic-ops.patch
-arm26-build-system-updates.patch
-arm26-update-comments-headers-notes.patch
-arm26-necessary-compilation-fixes-for-2610.patch
-arm26cleanup-trap-handling-assembly.patch
-arm26-new-execve-code.patch
-arm26-move-some-files-to-better-locations.patch
-arm26-remove-shark-arm32-from-arm26.patch
-arm26-softirq-update.patch
-arm26-update-systemh-to-some-semblance-of-recentness.patch -arm26-replace-arm32-time-handling-code-with-smaller-version.patch
-arm26-tlb-update.patch
-arm26-better-put_user-macros.patch
-arm26-better-unistdh-reimplemented-based-on-arm32.patch
-ia64-remove-hcdp-support-for-early-printk.patch
-typeofdev-powersaved_state.patch
-fix-naming-in-swsusp.patch
-swsusp-kill-unused-variable.patch
-swsusp-kill-one-line-helpers-handle-read-errors.patch
-swsusp-small-cleanups.patch
-swsusp-kill-on2-algorithm-in-swsusp.patch
-swsusp-try_to_freeze-to-make-freezing-hooks-nicer.patch -swsusp-try_to_freeze-to-make-freezing-hooks-nicer-fix.patch
-m32r-add-new-relocation-types-to-elfh.patch
-m32r-support-pgprot_noncached.patch
-m32r-update-ptracec-for-multithread.patch
-m32r-fix-not-to-execute-noexec-pages-0-3.patch
-m32r-cause-sigsegv-for-nonexec-page.patch
-m32r-dont-encode-ace_instruction-in.patch
-m32r-clean-up-arch-m32r-mm-faultc-3-3.patch
-m32r-clean-up-include-asm-m32r-pgtableh.patch
-m32r-support-page_none-1-3.patch
-m32r-remove-page_user-2-3.patch
-m32r-clean-up.patch
-m32r-include-asm-m32r-thread_infoh-minor.patch
-m32r-use-kmalloc-for-m32r-stacks-2-2.patch
-m32r-make-kernel-headers-for-mutual.patch
-m32r-use-generic-hardirq-framework.patch
-m32r-update-include-asm-m32r-systemh.patch
-m32r-update-include-asm-m32r-mmu_contexth.patch
-uml-remove-most-devfs_mk_symlink-calls.patch
-uml-fix-__wrap_free-comment.patch
-uml-fix-some-ptrace-functions-returns-values.patch
-uml-redo-the-signal-delivery-mechanism.patch
-uml-make-restorer-match-i386.patch
-uml-unistdh-cleanup.patch
-uml-remove-a-quilt-induced-duplicity.patch
-uml-fix-sigreturn-to-not-copy_user-under-a-spinlock.patch
-uml-close-host-file-descriptors-properly.patch
-uml-free-host-resources-associated-with-freed-irqs.patch
-uml-unregister-signal-handlers-at-reboot.patch
-hostfs-uml-set-sendfile-to-generic_file_sendfile.patch
-hostfs-uml-add-some-other-pagecache-methods.patch
-uml-terminal-cleanup.patch
-uml-first-part-rework-of-run_helper-and-users.patch
-uml-finish-fixing-run_helper-failure-path.patch
-uml-add-elf-vsyscall-support.patch
-uml-make-vsyscall-page-into-process-page-tables.patch
-uml-include-vsyscall-page-in-core-dumps.patch
-uml-add-tracesysgood-support.patch
-uml-kill-host-processes-properly.patch
-uml-defconfig-update.patch
-uml-small-vsyscall-fixes.patch
-uml-export-end_iomem.patch
-uml-system-call-restart-fixes.patch
-uml-fix-setting-of-tif_sigpending.patch
-uml-allow-vsyscall-code-to-build-on-24.patch
-uml-sysemu-fixes.patch
-uml-correctly-restore-extramask-in-sigreturn.patch
-uml-fix-update_process_times-call.patch
-uml-detect-sysemu_singlestep.patch
-uml-use-sysemu_singlestep.patch
-uml-declare-ptrace_setfpregs.patch
-uml-remove-bogus-__nr_sigreturn-check.patch
-uml-fix-highmem-compilation.patch
-uml-symbol-export.patch
-uml-fix-umldir-init-order.patch
-uml-raise-tty-limit.patch
-uml-sysfs-support-for-uml-network-driver.patch
-uml-sysfs-support-for-the-uml-block-devices.patch
-s390-remove-compat-setup_arg_pages32.patch
-s390-core-patches.patch
-s390-common-i-o-layer.patch
-s390-network-device-driver-patches.patch
-s390-dasd-driver.patch
-s390-character-device-drivers.patch
-s390-dcss-driver-cleanup-fix.patch
-s390-sclp-device-driver-cleanup.patch
-enhanced-i-o-accounting-data-patch.patch
-enhanced-memory-accounting-data-collection.patch
-enhanced-memory-accounting-data-collection-tidy.patch
-4-4gb-incorrect-bound-check-in-do_getname.patch
-handle-quoted-module-parameters.patch
-move-irq_enter-and-irq_exit-to-common-code.patch
-remove-unused-irq_cpustat-fields.patch
-hold-bkl-for-shorter-period-in-generic_shutdown_super.patch
-cleanups-for-the-ipmi-driver.patch
-kill-blkh.patch
-ext3-cleanup-handling-of-aborted-transactions.patch
-ext3-handle-attempted-delete-of-bitmap-blocks.patch
-ext3-handle-attempted-double-delete-of-metadata.patch
-cpumask_t-initializers.patch
-time-run-too-fast-after-s3.patch
-fork-total_forks-not-counted-under-tasklist_lock.patch
-suppress-might_sleep-if-oopsing.patch
-file-sync-no-i_sem.patch
-ext3-support-for-ea-in-inode.patch
-ext3-support-for-ea-in-inode-warning-fix.patch
-off-by-one-in-drivers-parport-probec.patch
-compile-with-ffreestanding.patch
-sys_stime-needs-a-compat-function.patch
-sys_stime-needs-a-compat-function-update.patch
-sync-in-core-time-granuality-with-filesystems.patch -sync-in-core-time-granuality-with-filesystems-sonypi-fix.patch
-remove-ip2-programs.patch
-rcu-eliminate-rcu_ctrlblklock.patch
-rcu-make-two-internal-structs-static.patch
-rcu-simplify-quiescent-state-detection.patch
-smb_file_open-retval-fix.patch
-sys_sched_setaffinity-on-up-should-fail-for-non-zero.patch
-make-gconfig-work-with-gtk-24.patch
-edd-add-edd=off-and-edd=skipmbr-options.patch
-panic_timeout-move-to-kernelh.patch
-add-pr_get_name.patch
-fix-alt-sysrq-deadlock.patch
-cpumask-range-check-before-using-value.patch
-noop-iosched-make-code-static.patch
-noop-iosched-remove-unused-includes.patch
-loop-device-recursion-avoidance.patch
-noone-uses-have_arch_si_codes-or-have_arch_sigevent_t.patch
-get_blkdev_list-cleanup.patch
-ext-apply-umask-to-symlinks-with-acls-configured-out.patch
-fix-missing-wakeup-in-ipc-sem.patch
-irq-resource-deallocation-acpi.patch
-irq-resource-deallocation-ia64.patch
-__getblk_slow-can-loop-forever-when-pages-are-partially.patch
-remove-rcu-abuse-in-cpu_idle.patch
-remove-rcu-abuse-in-cpu_idle-warning-fix.patch
-udf-simplify-udf_iget-fix-race.patch
-udf-fix-reservation-discarding.patch
-remove-dead-ext3_put_inode-prototype.patch
-compat-sigtimedwait.patch
-compat-sigtimedwait-sparc64-fix.patch
-compat-sigtimedwait-ppc64-fix.patch
-msync-set-PF_SYNCWRITE.patch
-prio_tree-roll-call-to-prio_tree_first-into-prio_tree_next.patch
-prio_tree-generalization.patch
-prio_tree-move-general-code-from-mm-to-lib.patch
-lcd-fix-memory-leak-code-cleanup.patch
-fix-conflicting-cpu_idle-declarations.patch
-removes-redundant-sys_delete_module.patch
-fix-stop-signal-race.patch
-move-group_exit-flag-into-signal_structflags-word.patch
-fix-ptracer-death-race-yielding-bogus-bug_on.patch -move-waitchld_exit-from-task_struct-to-signal_struct.patch
-task_structexit_state-usage.patch
-trivial-uninline-kill-__exit_mm.patch
-#optimize-__make_request-a-little.patch
-selinux-scalability-add-spin_trylock_irq-and.patch
-selinux-scalability-convert-avc-to-rcu.patch
-selinux-scalability-convert-avc-to-rcu-fix.patch
-selinux-atomic_dec_and_test-bug.patch
-selinux-scalability-avc-statistics-and-tuning.patch
-selinux-regenerate-selinux-module-headers.patch
-selinux-update-selinux_task_setscheduler.patch
-selinux-audit-task-comm-if-exe-cannot-be-determined.patch -selinux-add-dynamic-context-transition-support-to-selinux.patch -selinux-enhance-selinux-control-of-executable-mappings.patch
-selinux-add-member-node-to-selinuxfs.patch
-selinux-eliminate-unaligned-accesses-by-policy-loading-code.patch -oprofile-add-check_user_page_readable.patch
-oprofile-arch-independent-code-for-stack-trace.patch -oprofile-arch-independent-code-for-stack-trace-rename-timer_init.patch
-oprofile-timer-backtrace-fix-2.patch
-oprofile-i386-support-for-stack-trace-sampling.patch -oprofile-i386-support-for-stack-trace-sampling-cleanup.patch -oprofile-i386-support-for-stack-trace-sampling-fix.patch -oprofile-ia64-support-for-oprofile-stack-trace.patch
-oprofile-update-alpha-for-api-changes.patch
-oprofile-update-arm-for-api-changes.patch
-oprofile-update-ppc-for-api-changes.patch
-oprofile-update-parisc-for-api-changes.patch
-oprofile-update-s390-for-api-changes.patch
-oprofile-update-sh-for-api-changes.patch
-oprofile-update-sparc64-for-api-changes.patch
-oprofile-minor-cleanups.patch
-knfsd-nfsd_translate_wouldblocks.patch
-knfsd-svcrpc-auth_null-fixes.patch
-knfsd-svcrpc-share-code-duplicated-between-auth_unix-and-auth_null.patch -knfsd-nfsd4-fix-open_downgrade-decode-error.patch -knfsd-rpcsec_gss-comparing-pointer-to-0-instead-of-null.patch -knfsd-nfsd4-fix-fileid-in-readdir-responses.patch -knfsd-nfsd4-use-the-fsid-export-option-when-returning-the-fsid-attribute.patch -knfsd-nfsd4-encode_dirent-cleanup.patch
-knfsd-nfsd4-encode_dirent-superfluous-assignment.patch -knfsd-nfsd4-encode_dirent-superfluous-local-variables.patch -knfsd-nfsd4-encode_dirent-more-readdir-attribute-encoding-to-new-function.patch -knfsd-nfsd4-encode_dirent-simplify-nfs4_encode_dirent_fattr.patch -knfsd-nfsd4-encode_dirent-move-rdattr_error-code-to-new-function.patch -knfsd-nfsd4-encode_dirent-simplify-error-handling.patch -knfsd-nfsd4-encode_dirent-simplify-control-flow.patch
-knfsd-nfsd4-encode_dirent-fix-dropit-return.patch
-knfsd-nfsd4-encode_dirent-trivial-cleanup.patch -knfsd-move-nfserr_openmode-checking-from-nfsd_read-write-into-nfs4_preprocess_stateid_op-in-preperation-for-delegation-state.patch -knfsd-check-the-callback-netid-in-gen_callback.patch
-knfsd-count-the-nfs4_client-structure-usage.patch -knfsd-preparation-for-delegation-client-callback-probe.patch -knfsd-preparation-for-delegation-client-callback-probe-warning-fixes.patch -knfsd-probe-the-callback-path-upon-a-successful-setclientid_confirm.patch -knfsd-check-for-existence-of-file_lock-parameter-inside-of-the-kernel-lock.patch -knfsd-get-rid-of-the-special-delegation_stateid_t-use-the-existing-stateid_t.patch -knfsd-add-structures-for-delegation-support.patch -knfsd-allocate-and-initialize-the-delegation-structure.patch -knfsd-find-a-delegation-for-a-file-given-a-stateid.patch -knfsd-add-the-delegation-release-and-free-functions.patch
-knfsd-changes-to-expire_client.patch
-knfsd-delay-nfsd_colse-for-delegations-until-reaping.patch
-knfsd-delegation-recall-callback-rpc.patch
-knfsd-kernel-thread-for-delegation-callback.patch -knfsd-helper-functions-for-deciding-to-grant-a-delegation.patch
-knfsd-attempt-to-hand-out-a-delegation.patch
-knfsd-remove-unnecessary-stateowner-existence-check.patch -knfsd-check-for-openmode-violations-given-a-delegation-stateid.patch -knfsd-add-checking-of-delegation-stateids-to-nfs4_preprocess_stateid_op.patch -knfsd-add-the-delegreturn-operation.patch
-knfsd-add-to-the-laundromat-service-for-delegations.patch -knfsd-clear-the-recall_lru-of-delegations-at-shutdown.patch
-invalidate_inodes-speedup.patch
-linux-2.6.8.1-49-rpc_workqueue.patch
-linux-2.6.8.1-50-rpc_queue_lock.patch
-fbdev-sis-framebuffer-driver-update-1717.patch
-fbdev-sysfs-fix.patch
-pm2fb-module-parameters-and-module-conditional-code.patch
-pm2fb-save-restore-memory-config.patch
-pm2fb-use-modedb-in-modules.patch
-pm2fb-fix-big-endian-sparc-support.patch
-pm2fb-fix-fbi-image-display-on-24-bit-depth-big-endian.patch -fix-rom-enable-disable-in-r128-and-radeon-fb-drivers.patch
-fbdev-cleanup-i2c-code-of-rivafb.patch
-fbdev-revive-bios-less-booting-for-rage-xl-cards.patch
-fbdev-revive-global_mode_option.patch
-fbcon-fbdev-add-blanking-notification.patch
-fbcon-fbdev-add-blanking-notification-fix.patch
-fbdev-check-return-value-of-fb_add_videomode.patch -fbdev-do-a-symbol_put-for-each-symbol_get-in-savagefb.patch -fbdev-add-viewsonic-pf775a-to-broken-display-database.patch
-fbdev-fix-default-timings-in-vga16fb.patch
-fbdev-reduce-stack-usage-of-intelfb.patch
-zr36067-driver-correct-jpeg-app-com-markers.patch
-zr36067-driver-ppc-be-port.patch
-zr36067-driver-reduce-stack-size-usage.patch
Merged
+gfp_zero-pktcdvd-fix.patch
Fix the __GFP_ZERO stuff
+s390-add-missing-pte_read-function.patch
s/390 build fix
+mmc-build-fix.patch
drivers/mmc build fix
+bk-acpi-revert-20041210.patch
Remove bad patch from bk-acpi.
+acpi-kfree-fix.patch
Might fix an acpi bug.
+agpgart-allow-multiple-backends-to-be-initialized.patch +drm-add-support-for-new-multiple-agp-bridge-agpgart-api.patch +fb-add-support-for-new-multiple-agp-bridge-agpgart-api.patch +agpgart-add-bridge-parameter-to-driver-functions.patch
Support for multiple AGP bridges.
+x86_64-agp-hack.patch
Hack it (badly) to make x86_64 compile.
+vmscan-count-writeback-pages-in-nr_scanned.patch
page reclaim fix
-xircom_tulip_cb-build-fix-warning-fix.patch
Folded into xircom_tulip_cb-build-fix.patch
+add-omap-support-to-smc91x-ethernet-driver.patch +restore-net-sched-iptc-after-iptables-kmod-cleanup.patch +netfilter-ipt-build-fix.patch
net fixes
+split-bprm_apply_creds-into-two-functions.patch +merge-_vm_enough_memorys-into-a-common-helper.patch
security work
+ppc64-add-performance-monitor-register-information-to-processorh.patch +ppc64-use-newer-rtas-call-when-available.patch +ppc64-clean-up-trap-handling.patch +ppc64-clean-up-trap-handling-in-heads.patch +ppc64-log-machine-check-errors-to-error-log-and-nvram.patch +ppc64-iommu-cleanups-rename-pci_dma_directc.patch +ppc64-iommu-cleanups-main-cleanup-patch.patch
ppc64 updates
+dmi_iterate-fix.patch
dmi oops fix
+arch-i386-kernel-cpu-mtrr-too-many-bits-are-masked-off-from-cr4.patch
x86 mtrr fix
+pm-introduce-pm_message_t.patch +mark-older-power-managment-as-deprecated.patch +swsusp-device-power-management-fix.patch +swsusp-properly-suspend-and-resume-all-devices.patch
swsusp updates
+request_irq-avoid-slash-in-proc-directory-entries.patch
Don't try to create /proc files which contain slashes
+prohibit-slash-in-proc-directory-entry-names.patch
Error out if someone tries to do it again.
+speedup-proc-pid-maps.patch
Optimise /proc/pid/maps
+fix-cdrom-autoclose.patch
cdrom fix
+move-accounting-function-calls-out-of-critical-vm-code-paths.patch
Speed up the new accounting code.
-ioctl-rework.patch
+ioctl-rework-2.patch
New version of the patch which permits bkl-less ioctl implementations.
+fix-__ptrace_unlink-task_traced-recovery-for-real-parent.patch +fix-coredump_wait-deadlock-with-ptracer-tracee-on-shared-mm.patch
More ptrace fixes from Roland.
+oprofile-fix-ia64-callgraph-bug-with-old-gcc.patch
oprofile fix
+nfsd4_setclientid_confirm-locking-fix.patch
Fix the new nfsd code.
+sched-remove-outdated-misleading-comments.patch
Fix CPU scheduler comments
+debug-sched-domains-before-attach.patch
CPU scheduler debugging
+replace-numnodes-with-node_online_map-ia64-fix.patch
Fix replace-numnodes-with-node_online_map-ia64.patch
+replace-numnodes-with-node_online_map-fix.patch
Fix replace-numnodes-with-node_online_map.patch
+block2mtd-avoid-touching-truncate_count.patch
Don't play with ->truncate_count - it is going away.
+cpu_idle-smp_processor_id-warning-fix.patch
Avoid an "smp_processor_id in preemptible code" warning.
+add-page-becoming-writable-notification-build-fix.patch
Fix add-page-becoming-writable-notification-fix.patch
+kexec-kexecx86_64-4level-fix-unfix.patch
Hack to make x86_64 compile. Will break kexec.
-reiser4-unstatic-kswapd.patch
Hopefully not needed.
+generic-serial-cli-conversion.patch
+specialix-io8-cli-conversion.patch
+rio-cli-conversion.patch
+rio_linux-64-bit-workaround.patch
+sx-cli-conversion.patch
De-cli()ify a few char drivers.
+fbdev-rivafb-should-recognize-nf2-igp.patch
New PCI ID.
+bug-on-error-handlings-in-ext3-under-i-o-failure.patch +bug-on-error-handlings-in-ext3-under-i-o-failure-fix.patch
Fix ext3 I/O error handling.
+cputime-introduce-cputime-vs-move-accounting-function-calls-out-of-critical-vm-code-paths.patch
Fix the cputime patches for the I/O accounting speedup patch.
+update-hugetlb-documentation.patch
Documentation update
+ide-cd-is-very-noisy.patch
Kill some printks
+signedness-fix-in-deadline-ioschedc.patch
deadline /sys fix
+cleanup-virtual-console-selectionc-interface.patch
Code cleanup
+warn-about-cli-sti-co-uses-even-on-up.patch
deprecate cli() and sti().
+remove-umsdos-from-tree.patch
Kill umsdos.
+kill-quota_v2c-printk-of-size_t-warning.patch +kill-gen_init_cpioc-printk-of-size_t-warning.patch +silence-numerous-size_t-warnings-in-drivers-acpi-processor_idlec.patch
size_t warning fixes
+make-irda-string-tables-conditional-on-config_irda_debug.patch
Dead code fix
+fix-unresolved-mtd-symbols-in-scx200_docflashc.patch +fix-module_param-type-mismatch-in-drivers-char-n_hdlcc.patch
Build fixes
+drivers-char-misc-cleanups.patch +pktcdvd-make-two-functions-static.patch +pktcdvd-grep-friendly-function-prototypes.patch +pktcdvd-small-documentation-update.patch +isofs-remove-useless-include.patch +synaptics-remove-unused-struct-member-variable.patch +kill-one-if-x-vfreex-usage.patch +smbfs-make-some-functions-static.patch
Various small cleanups and fixes
+periodically-scan-redzone-entries-and-slab-control-structures.patch
Additional slab sanity checking
number of patches in -mm: 560
number of changesets in external trees: 479
number of patches in -mm only: 544
total patches: 1023
All 560 patches:
linus.patch
gfp_zero-pktcdvd-fix.patch
__GFP_ZERO pktcdvd fix
s390-add-missing-pte_read-function.patch
s390: add missing pte_read function
mmc-build-fix.patch
mmc build fix
bk-acpi.patch
bk-acpi-revert-20041210.patch
bk-acpi-revert-20041210
acpi-report-errors-in-fanc.patch
ACPI: report errors in fan.c
acpi-flush-tlb-when-pagetable-changed.patch
acpi: flush TLB when pagetable changed
acpi-kfree-fix.patch
a
bk-alsa.patch
bk-arm.patch
bk-cifs.patch
bk-cpufreq.patch
bk-drm-via.patch
bk-i2c.patch
bk-ia64.patch
bk-ide-dev.patch
ide-dev-build-fix.patch
ide-dev-build-fix
bk-dtor-input.patch
bk-kconfig.patch
bk-netdev.patch
via-rhine-warning-fix.patch
via-rhine warning fix
hostap-fix-kconfig-typos-and-missing-select-crypto.patch
hostap: fix Kconfig typos and missing select CRYPTO
ixgb-lr-card-support.patch
ixgb LR card support
bk-ntfs.patch
bk-pci.patch
bk-scsi.patch
mm.patch
add -mmN to EXTRAVERSION
fix-smm-failures-on-e750x-systems.patch
fix SMM failures on E750x systems
agpgart-allow-multiple-backends-to-be-initialized.patch
agpgart: allow multiple backends to be initialized
drm-add-support-for-new-multiple-agp-bridge-agpgart-api.patch
drm: add support for new multiple agp bridge agpgart api
fb-add-support-for-new-multiple-agp-bridge-agpgart-api.patch
fb: add support for new multiple agp bridge agpgart api
agpgart-add-bridge-parameter-to-driver-functions.patch
agpgart: add bridge parameter to driver functions
x86_64-agp-hack.patch
x86_64 agp hack
vmscan-count-writeback-pages-in-nr_scanned.patch
vmscan: count writeback pages in nr_scanned
vm-pageout-throttling.patch
vm: pageout throttling
make-tree_lock-an-rwlock.patch
make mapping->tree_lock an rwlock
must-fix.patch
must fix lists update
must fix list update
mustfix update
must-fix update
mustfix lists
xircom_tulip_cb-build-fix.patch
xircom_tulip_cb.c build fix
net-netconsole-poll-support-for-3c509.patch
net: Netconsole poll support for 3c509
pcnet32-79c976-with-fiber-optic.patch
pcnet32: 79c976 with fiber optic fix
multicast-filtering-for-tunc.patch
Multicast filtering for tun.c
r8169-missing-netif_poll_enable-and-irq-ack.patch
r8169: missing netif_poll_enable and irq ack
r8169-c-101.patch
r8169: C 101
r8169-large-send-enablement.patch
r8169: Large Send enablement
r8169-reduce-max-mtu-for-large-frames.patch
r8169: reduce max MTU for large frames
r8169-oversized-driver-field-for-ethtool.patch
r8169: oversized driver field for ethtool
fix-ibm_emac-autonegotiation-result-parsing.patch
EMAC: fix ibm_emac autonegotiation result parsing
add-omap-support-to-smc91x-ethernet-driver.patch
Add OMAP support to smc91x Ethernet driver
restore-net-sched-iptc-after-iptables-kmod-cleanup.patch
Restore net/sched/ipt.c After iptables Kmod Cleanup
netfilter-ipt-build-fix.patch
netfilter: ipt build fix
split-bprm_apply_creds-into-two-functions.patch
split bprm_apply_creds into two functions
merge-_vm_enough_memorys-into-a-common-helper.patch
merge *_vm_enough_memory()s into a common helper
ppc64-add-performance-monitor-register-information-to-processorh.patch
ppc64: add performance monitor register information to processor.h
ppc64-use-newer-rtas-call-when-available.patch
ppc64: use newer RTAS call when available
ppc64-clean-up-trap-handling.patch
ppc64: clean up trap handling
ppc64-clean-up-trap-handling-in-heads.patch
ppc64: clean up trap handling in head.S
ppc64-log-machine-check-errors-to-error-log-and-nvram.patch
ppc64: Log machine check errors to error log and NVRAM
ppc64-iommu-cleanups-rename-pci_dma_directc.patch
ppc64: IOMMU cleanups: rename pci_dma_direct.c
ppc64-iommu-cleanups-main-cleanup-patch.patch
ppc64: IOMMU cleanups: Main cleanup patch
ppc64-reloc_hide.patch
superhyway-bus-support.patch
SuperHyway bus support
dmi_iterate-fix.patch
dmi_iterate() fix
arch-i386-kernel-cpu-mtrr-too-many-bits-are-masked-off-from-cr4.patch
arch/i386/kernel/cpu/mtrr: too many bits are masked off from CR4
xen-vmm-4-add-ptep_establish_new-to-make-va-available.patch
Xen VMM #4: add ptep_establish_new to make va available
xen-vmm-4-return-code-for-arch_free_page.patch
Xen VMM #4: return code for arch_free_page
xen-vmm-4-return-code-for-arch_free_page-fix.patch
Get rid of arch_free_page() warning
xen-vmm-4-runtime-disable-of-vt-console.patch
Xen VMM #4: runtime disable of VT console
xen-vmm-4-has_arch_dev_mem.patch
Xen VMM #4: HAS_ARCH_DEV_MEM
xen-vmm-4-split-free_irq-into-teardown_irq.patch
Xen VMM #4: split free_irq into teardown_irq
pm-introduce-pm_message_t.patch
pm: introduce pm_message_t
mark-older-power-managment-as-deprecated.patch
mark older power managment as deprecated
swsusp-device-power-management-fix.patch
swsusp: device power management fix
swsusp-properly-suspend-and-resume-all-devices.patch
swsusp: properly suspend and resume all devices
wacom-tablet-driver.patch
wacom tablet driver
force-feedback-support-for-uinput.patch
Force feedback support for uinput
kmap_atomic-takes-char.patch
kmap_atomic takes char*
kmap_atomic-takes-char-fix.patch
kmap_atomic-takes-char-fix
kmap_atomic-fallout.patch
kmap_atomic fallout
kunmap-fallout-more-fixes.patch
kunmap-fallout-more-fixes
CONFIG_SOUND_VIA82CXXX_PROCFS.patch
Add CONFIG_SOUND_VIA82CXXX_PROCFS
make-sysrq-f-call-oom_kill.patch
make sysrq-F call oom_kill()
allow-admin-to-enable-only-some-of-the-magic-sysrq-functions.patch
Allow admin to enable only some of the Magic-Sysrq functions
request_irq-avoid-slash-in-proc-directory-entries.patch
request_irq: avoid slash in proc directory entries
prohibit-slash-in-proc-directory-entry-names.patch
prohibit slash in proc directory entry names
speedup-proc-pid-maps.patch
Speed up /proc/pid/maps
fix-cdrom-autoclose.patch
fix cdrom autoclose
move-accounting-function-calls-out-of-critical-vm-code-paths.patch
Move accounting function calls out of critical vm code paths
gen_init_cpio-symlink-pipe-socket-support.patch
gen_init_cpio symlink, pipe and socket support
gen_init_cpio-slink_pipe_sock_2.patch
gen_init_cpio-slink_pipe_sock_2
initramfs-allow-no-trailer.patch
INITRAMFS: allow no trailer
htree-telldir-fix.patch
ext3 htree telldir() fix
ioctl-rework-2.patch
ioctl rework #2
initramfs-unprivileged-image-creation.patch
initramfs: unprivileged image creation
fix-__ptrace_unlink-task_traced-recovery-for-real-parent.patch
fix __ptrace_unlink TASK_TRACED recovery for real parent
fix-coredump_wait-deadlock-with-ptracer-tracee-on-shared-mm.patch
fix coredump_wait deadlock with ptracer & tracee on shared mm
oprofile-fix-ia64-callgraph-bug-with-old-gcc.patch
oprofile: fix ia64 callgraph bug with old gcc
pcmcia-new-ds-cs-interface.patch
pcmcia: new ds - cs interface
pcmcia-call-device-drivers-from-ds-not-from-cs.patch
pcmcia: call device drivers from ds, not from cs
pcmcia-unify-bind_mtd-and-pcmcia_bind_mtd.patch
pcmcia: unify bind_mtd and pcmcia_bind_mtd
pcmcia-unfiy-bind_device-and-pcmcia_bind_device.patch
pcmcia: unfiy bind_device and pcmcia_bind_device
pcmcia-device-model-integration-can-only-be-submitted-under-gpl.patch
pcmcia: device model integration can only be submitted under GPL
pcmcia-add-pcmcia_devices.patch
pcmcia: add pcmcia_device(s)
pcmcia-remove-socket_bind_t-use-pcmcia_devices-instead.patch
pcmcia: remove socket_bind_t, use pcmcia_devices instead
pcmcia-remove-internal-module-use-count-use-module_refcount-instead.patch
pcmcia: remove internal module use count, use module_refcount instead
pcmcia-set-drivers-owner-field.patch
pcmcia: set driver's .owner field
pcmcia-move-pcmcia_unregister_client-to-ds.patch
pcmcia: move pcmcia_(un,)register_client to ds
pcmcia-device-model-integration-can-only-be-submitted-under-gpl-part-2.patch
pcmcia: device model integration can only be submitted under GPL, part 2
pcmcia-use-kref-instead-of-native-atomic-counter.patch
pcmcia: use kref instead of native atomic counter
pcmcia-add-pcmcia_putget_socket.patch
pcmcia: add pcmcia_(put,get)_socket
pcmcia-grab-a-reference-to-the-cs-socket-in-ds.patch
pcmcia: grab a reference to the cs-socket in ds
pcmcia-get-a-reference-to-ds-socket-for-each-pcmcia_device.patch
pcmcia: get a reference to ds-socket for each pcmcia_device
pcmcia-add-a-pointer-to-client-in-struct-pcmcia_device.patch
pcmcia: add a pointer to client in struct pcmcia_device
pcmcia-use-pcmcia_device-in-send_event.patch
pcmcia: use pcmcia_device in send_event
pcmcia-use-pcmcia_device-to-mark-clients-as-stale.patch
pcmcia: use pcmcia_device to mark clients as stale
pcmcia-code-moving-in-ds.patch
pcmcia: code moving in ds
pcmcia-use-pcmcia_device-in-register_client.patch
pcmcia: use pcmcia_device in register_client
pcmcia-direct-ordered-unbind-of-devices.patch
pcmcia: direct-ordered unbind of devices
pcmcia-bug-on-dev_list-=-null.patch
pcmcia: BUG on dev_list != NULL
pcmcia-bug-if-clients-are-kept-too-long.patch
pcmcia: BUG() if clients are kept too long
pcmcia-move-struct-client_t-inside-struct-pcmcia_device.patch
pcmcia: move struct client_t inside struct pcmcia_device
pcmcia-use-driver_find-in-ds.patch
pcmcia: use driver_find in ds
pcmcia-set_netdev-for-network-devices.patch
pcmcia: SET_NETDEV for network devices
pcmcia-set_netdev-for-wireless-network-devices.patch
pcmcia: SET_NETDEV for wireless network devices
pcmcia-reduce-stack-usage-in-ds_ioctl-randy-dunlap.patch
pcmcia: reduce stack usage in ds_ioctl (Randy Dunlap)
pcmcia-add-disable_clkrun-option.patch
pcmcia: Add disable_clkrun option
pcmcia-rename-pcmcia-devices.patch
pcmcia: rename PCMCIA devices
pcmcia-pd6729-e-mail-update.patch
pcmcia: pd6729: e-mail update
pcmcia-pd6729-cleanups.patch
pcmcia: pd6729: cleanups
pcmcia-pd6729-isa_irq-handling.patch
pcmcia: pd6729: isa_irq handling
pcmcia-remove-obsolete-code.patch
pcmcia: remove obsolete code
pcmcia-remove-pending_events.patch
pcmcia: remove pending_events
pcmcia-remove-client_attributes.patch
pcmcia: remove client_attributes
pcmcia-remove-unneeded-parameter-from-rsrc_mgr.patch
pcmcia: remove unneeded parameter from rsrc_mgr
pcmcia-remove-dev_info-from-client.patch
pcmcia: remove dev_info from client
pcmcia-remove-mtd-and-bulkmem-replaced-by-pcmciamtd.patch
pcmcia: remove mtd and bulkmem (replaced by pcmciamtd)
pcmcia-per-socket-resource-database.patch
pcmcia: per-socket resource database
pcmcia-validate_mem-only-for-non-statically-mapped-sockets.patch
pcmcia: validate_mem only for non-statically mapped sockets
pcmcia-adjust_io_region-only-for-non-statically-mapped-sockets.patch
pcmcia: adjust_io_region only for non-statically mapped sockets
pcmcia-find_io_region-only-for-non-statically-mapped-sockets.patch
pcmcia: find_io_region only for non-statically mapped sockets
pcmcia-find_mem_region-only-for-non-statically-mapped-sockets.patch
pcmcia: find_mem_region only for non-statically mapped sockets
pcmcia-adjust_-and-release_resources-only-for-non-statically-mapped-sockets.patch
pcmcia: adjust_ and release_resources only for non-statically mapped sockets
pcmcia-move-resource-handling-code-only-for-non-statically-mapped-sockets-to-other-file.patch
pcmcia: move resource handling code only for non-statically mapped sockets to other file
pcmcia-make-rsrc_nonstatic-an-independend-module.patch
pcmcia: make rsrc_nonstatic an independend module
pcmcia-allocate-resource-database-per-socket.patch
pcmcia: allocate resource database per-socket
pcmcia-remove-typedef.patch
pcmcia: remove typedef
pcmcia-grab-lock-in-resource_release.patch
pcmcia: grab lock in resource_release
nfsd4_setclientid_confirm-locking-fix.patch
nfsd4_setclientid_confirm locking fix
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
Fix stack overflow test for non-8k stacks kgdb-ga.patch fix for i386 single-step into sysenter fix TRAP_BAD_SYSCALL_EXITS on i386
add TRAP_BAD_SYSCALL_EXITS config for i386 kgdb-is-incompatible-with-kprobes kgdb-ga-build-fix
kgdb-ga-fixes
kgdb-kill-off-highmem_start_page.patch
kgdb: kill off highmem_start_page
kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address
kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-x86_64-fix
kgdb-x86_64-serial-fix
kprobes exception notifier fix
dev-mem-restriction-patch.patch
/dev/mem restriction patch
dev-mem-restriction-patch-allow-reads.patch
dev-mem-restriction-patch: allow reads
jbd-remove-livelock-avoidance.patch
JBD: remove livelock avoidance code in journal_dirty_data()
journal_add_journal_head-debug.patch
journal_add_journal_head-debug
list_del-debug.patch
list_del debug check
unplug-can-sleep.patch
unplug functions can sleep
firestream-warnings.patch
firestream warnings
perfctr-core.patch
perfctr: core
perfctr-i386.patch
perfctr: i386
perfctr-x86-core-updates.patch
perfctr x86 core updates
perfctr-x86-driver-updates.patch
perfctr x86 driver updates
perfctr-x86-driver-cleanup.patch
perfctr: x86 driver cleanup
perfctr-prescott-fix.patch
Prescott fix for perfctr
perfctr-x86-update-2.patch
perfctr x86 update 2
perfctr-x86_64.patch
perfctr: x86_64
perfctr-x86_64-core-updates.patch
perfctr x86_64 core updates
perfctr-ppc.patch
perfctr: PowerPC
perfctr-ppc32-driver-update.patch
perfctr: ppc32 driver update
perfctr-ppc32-mmcr0-handling-fixes.patch
perfctr ppc32 MMCR0 handling fixes
perfctr-ppc32-update.patch
perfctr ppc32 update
perfctr-ppc32-update-2.patch
perfctr ppc32 update
perfctr-virtualised-counters.patch
perfctr: virtualised counters
perfctr-remap_page_range-fix.patch
virtual-perfctr-illegal-sleep.patch
virtual perfctr illegal sleep
make-perfctr_virtual-default-in-kconfig-match-recommendation.patch
Make PERFCTR_VIRTUAL default in Kconfig match recommendation in help text
perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup
perfctr-update-2-6-kconfig-related-updates.patch
perfctr: Kconfig-related updates
perfctr-virtual-updates.patch
perfctr virtual updates
perfctr-virtual-cleanup.patch
perfctr: virtual cleanup
perfctr-ppc32-preliminary-interrupt-support.patch
perfctr ppc32 preliminary interrupt support
perfctr-update-5-6-reduce-stack-usage.patch
perfctr: reduce stack usage
perfctr-interrupt-support-kconfig-fix.patch
perfctr interrupt_support Kconfig fix
perfctr-low-level-documentation.patch
perfctr low-level documentation
perfctr-inheritance-1-3-driver-updates.patch
perfctr inheritance: driver updates
perfctr-inheritance-2-3-kernel-updates.patch
perfctr inheritance: kernel updates
perfctr-inheritance-3-3-documentation-updates.patch
perfctr inheritance: documentation updates
perfctr-inheritance-locking-fix.patch
perfctr inheritance locking fix
perfctr-api-changes-first-step.patch
perfctr API changes: first step
perfctr-virtual-update.patch
perfctr virtual update
perfctr-x86-64-ia32-emulation-fix.patch
perfctr x86-64 ia32 emulation fix
perfctr-sysfs-update-1-4-core.patch
perfctr sysfs update: core
perfctr-sysfs-update.patch
Perfctr sysfs update
perfctr-sysfs-update-2-4-x86.patch
perfctr sysfs update: x86
perfctr-sysfs-update-3-4-x86-64.patch
perfctr sysfs update: x86-64
perfctr-sysfs-update-4-4-ppc32.patch
perfctr sysfs update: ppc32
sched-more-agressive-wake_idle.patch
sched: more agressive wake_idle()
sched-can_migrate-exception-for-idle-cpus.patch
sched: can_migrate exception for idle cpus
sched-newidle-fix.patch
sched: newidle fix
sched-active_load_balance-fixlet.patch
sched: active_load_balance() fixlet
sched-reset-cache_hot_time.patch
sched: reset cache_hot_time
schedc-whitespace-mangler.patch
sched.c whitespace mangler
sched-alter_kthread_prio.patch
sched: alter_kthread_prio
sched-adjust_timeslice_granularity.patch
sched: adjust_timeslice_granularity
sched-add_requeue_task.patch
sched: add_requeue_task
requeue_granularity.patch
sched: requeue_granularity
sched-remove_interactive_credit.patch
sched: remove_interactive_credit
sched-use-cached-current-value.patch
sched: use cached current value
dont-hide-thread_group_leader-from-grep.patch
don't hide thread_group_leader() from grep
sched-no-need-to-recalculate-rq.patch
sched: no need to recalculate rq
export-sched_setscheduler-for-kernel-module-use.patch
export sched_setscheduler() for kernel module use
sched-remove-outdated-misleading-comments.patch
sched: remove outdated/misleading comments
add-do_proc_doulonglongvec_minmax-to-sysctl-functions.patch
Add do_proc_doulonglongvec_minmax to sysctl functions add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix add-do_proc_doulonglongvec_minmax-to-sysctl-functions fix 2
add-sysctl-interface-to-sched_domain-parameters.patch
Add sysctl interface to sched_domain parameters
preempt-smp.patch
improve preemption on SMP
preempt-smp-_raw_read_trylock-bias-fix.patch
preempt-smp _raw_read_trylock bias fix
preempt-cleanup.patch
preempt cleanup
preempt-cleanup-fix.patch
preempt-cleanup-fix
add-lock_need_resched.patch
add lock_need_resched()
sched-add-cond_resched_softirq.patch
sched: add cond_resched_softirq()
sched-ext3-fix-scheduling-latencies-in-ext3.patch
sched: ext3: fix scheduling latencies in ext3
break-latency-in-invalidate_list.patch
break latency in invalidate_list()
sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent.patch
sched: vfs: fix scheduling latencies in prune_dcache() and select_parent()
sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent-fix.patch
sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent fix
sched-net-fix-scheduling-latencies-in-netstat.patch
sched: net: fix scheduling latencies in netstat
sched-net-fix-scheduling-latencies-in-__release_sock.patch
sched: net: fix scheduling latencies in __release_sock
sched-mm-fix-scheduling-latencies-in-unmap_vmas.patch
sched: mm: fix scheduling latencies in unmap_vmas()
sched-mm-fix-scheduling-latencies-in-get_user_pages.patch
sched: mm: fix scheduling latencies in get_user_pages()
sched-mm-fix-scheduling-latencies-in-filemap_sync.patch
sched: mm: fix scheduling latencies in filemap_sync()
fix-keventd-execution-dependency.patch
fix keventd execution dependency
sched-fix-scheduling-latencies-in-mttrc.patch
sched: fix scheduling latencies in mttr.c
sched-fix-scheduling-latencies-in-mttrc-reenables-interrupts.patch
sched-fix-scheduling-latencies-in-mttrc reenables interrupts
sched-fix-scheduling-latencies-in-vgaconc.patch
sched: fix scheduling latencies in vgacon.c
sched-fix-scheduling-latencies-for-preempt-kernels.patch
sched: fix scheduling latencies for !PREEMPT kernels
idle-thread-preemption-fix.patch
idle thread preemption fix
oprofile-smp_processor_id-fixes.patch
oprofile smp_processor_id() fixes
fix-smp_processor_id-warning-in-numa_node_id.patch
Fix smp_processor_id() warning in numa_node_id()
debug-sched-domains-before-attach.patch
debug sched domains before attach
replace-numnodes-with-node_online_map-alpha.patch
Subject: [RFC PATCH 1/10] Replace 'numnodes' with 'node_online_map' - alpha
replace-numnodes-with-node_online_map-arm.patch
Subject: [RFC PATCH 2/10] Replace 'numnodes' with 'node_online_map' - arm
replace-numnodes-with-node_online_map-i386.patch
Subject: [RFC PATCH 3/10] Replace 'numnodes' with 'node_online_map' - i386
replace-numnodes-with-node_online_map-ia64.patch
Subject: [RFC PATCH 4/10] Replace 'numnodes' with 'node_online_map' - ia64
replace-numnodes-with-node_online_map-ia64-fix.patch
replace-numnodes-with-node_online_map-ia64 fix
replace-numnodes-with-node_online_map-m32r.patch
Subject: [RFC PATCH 5/10] Replace 'numnodes' with 'node_online_map' - m32r
replace-numnodes-with-node_online_map-mips.patch
Subject: [RFC PATCH 6/10] Replace 'numnodes' with 'node_online_map' - mips
replace-numnodes-with-node_online_map-parisc.patch
Subject: [RFC PATCH 7/10] Replace 'numnodes' with 'node_online_map' - parisc
replace-numnodes-with-node_online_map-ppc64.patch
Subject: [RFC PATCH 8/10] Replace 'numnodes' with 'node_online_map' - ppc64
replace-numnodes-with-node_online_map-x86_64.patch
Subject: [RFC PATCH 9/10] Replace 'numnodes' with 'node_online_map' - x86_64
replace-numnodes-with-node_online_map.patch
Subject: [RFC PATCH 10/10] Replace 'numnodes' with 'node_online_map' - arch-independent
replace-numnodes-with-node_online_map-fix.patch
replace-numnodes-with-node_online_map fix
block2mtd-avoid-touching-truncate_count.patch
block2mtd: avoid touching truncate_count
vmtrunc-truncate_count-not-atomic.patch
vmtrunc: truncate_count not atomic
vmtrunc-restore-unmap_vmas-zap_bytes.patch
vmtrunc: restore unmap_vmas zap_bytes
vmtrunc-unmap_mapping_range_tree.patch
vmtrunc: unmap_mapping_range_tree
vmtrunc-unmap_mapping-dropping-i_mmap_lock.patch
vmtrunc: unmap_mapping dropping i_mmap_lock
vmtrunc-vm_truncate_count-race-caution.patch
vmtrunc: vm_truncate_count race caution
vmtrunc-bug-if-page_mapped.patch
vmtrunc: bug if page_mapped
vmtrunc-restart_addr-in-truncate_count.patch
vmtrunc: restart_addr in truncate_count
remove-the-bkl-by-turning-it-into-a-semaphore.patch
remove the BKL by turning it into a semaphore
cpu_idle-smp_processor_id-warning-fix.patch
cpu_idle-smp_processor_id-warning-fix
oprofile-preempt-warning-fixes.patch
oprofile preempt warning fixes
smp_processor_id-commentary.patch
smp_processor_id() commentary
cpu_down-warning-fix.patch
cpu_down() warning fix
allow-modular-ide-pnp.patch
allow modular ide-pnp
allow-x86_64-to-reenable-interrupts-on-contention.patch
Allow x86_64 to reenable interrupts on contention
i386-cpu-hotplug-updated-for-mm.patch
i386 CPU hotplug updated for -mm
ppc64-fix-cpu-hotplug.patch
ppc64: fix hotplug cpu
serialize-access-to-ide-devices.patch
serialize access to ide devices
disable-atykb-warning.patch
disable atykb "too many keys pressed" warning
export-file_ra_state_init-again.patch
Export file_ra_state_init() again
cachefs-filesystem.patch
CacheFS filesystem
numa-policies-for-file-mappings-mpol_mf_move-cachefs.patch
numa-policies-for-file-mappings-mpol_mf_move for cachefs
cachefs-release-search-records-lest-they-return-to-haunt-us.patch
CacheFS: release search records lest they return to haunt us
fix-64-bit-problems-in-cachefs.patch
Fix 64-bit problems in cachefs
cachefs-fixed-typos-that-cause-wrong-pointer-to-be-kunmapped.patch
cachefs: fixed typos that cause wrong pointer to be kunmapped
cachefs-return-the-right-error-upon-invalid-mount.patch
CacheFS: return the right error upon invalid mount
fix-cachefs-barrier-handling-and-other-kernel-discrepancies.patch
Fix CacheFS barrier handling and other kernel discrepancies
remove-error-from-linux-cachefsh.patch
Remove #error from linux/cachefs.h
cachefs-warning-fix-2.patch
cachefs warning fix 2
cachefs-linkage-fix-2.patch
cachefs linkage fix
cachefs-build-fix.patch
cachefs build fix
cachefs-documentation.patch
CacheFS documentation
add-page-becoming-writable-notification.patch
Add page becoming writable notification
add-page-becoming-writable-notification-fix.patch
do_wp_page_mk_pte_writable() fix
add-page-becoming-writable-notification-build-fix.patch
add-page-becoming-writable-notification build fix
provide-a-filesystem-specific-syncable-page-bit.patch
Provide a filesystem-specific sync'able page bit
provide-a-filesystem-specific-syncable-page-bit-fix.patch
provide-a-filesystem-specific-syncable-page-bit-fix
provide-a-filesystem-specific-syncable-page-bit-fix-2.patch
provide-a-filesystem-specific-syncable-page-bit-fix-2
make-afs-use-cachefs.patch
Make AFS use CacheFS
afs-cachefs-dependency-fix.patch
afs-cachefs-dependency-fix
split-general-cache-manager-from-cachefs.patch
Split general cache manager from CacheFS
turn-cachefs-into-a-cache-backend.patch
Turn CacheFS into a cache backend
rework-the-cachefs-documentation-to-reflect-fs-cache-split.patch
Rework the CacheFS documentation to reflect FS-Cache split
update-afs-client-to-reflect-cachefs-split.patch
Update AFS client to reflect CacheFS split
assign_irq_vector-section-fix.patch
assign_irq_vector __init section fix
kexec-i8259-shutdowni386.patch
kexec: i8259-shutdown.i386
kexec-i8259-shutdown-x86_64.patch
kexec: x86_64 i8259 shutdown
kexec-apic-virtwire-on-shutdowni386patch.patch
kexec: apic-virtwire-on-shutdown.i386.patch
kexec-apic-virtwire-on-shutdownx86_64.patch
kexec: apic-virtwire-on-shutdown.x86_64
kexec-ioapic-virtwire-on-shutdowni386.patch
kexec: ioapic-virtwire-on-shutdown.i386
kexec-apic-virt-wire-fix.patch
kexec: apic-virt-wire fix
kexec-ioapic-virtwire-on-shutdownx86_64.patch
kexec: ioapic-virtwire-on-shutdown.x86_64
kexec-e820-64bit.patch
kexec: e820-64bit
kexec-kexec-generic.patch
kexec: kexec-generic
kexec-ide-spindown-fix.patch
kexec-ide-spindown-fix
kexec-ifdef-cleanup.patch
kexec ifdef cleanup
kexec-machine_shutdownx86_64.patch
kexec: machine_shutdown.x86_64
kexec-kexecx86_64.patch
kexec: kexec.x86_64
kexec-kexecx86_64-4level-fix.patch
kexec-kexecx86_64-4level-fix
kexec-kexecx86_64-4level-fix-unfix.patch
kexec-kexecx86_64-4level-fix unfix
kexec-machine_shutdowni386.patch
kexec: machine_shutdown.i386
kexec-kexeci386.patch
kexec: kexec.i386
kexec-use_mm.patch
kexec: use_mm
kexec-loading-kernel-from-non-default-offset.patch
kexec: loading kernel from non-default offset
kexec-loading-kernel-from-non-default-offset-fix.patch
kdump: fix bss compile error
kexec-enabling-co-existence-of-normal-kexec-kernel-and-panic-kernel.patch
kexec: nabling co-existence of normal kexec kernel and panic kernel
kexec-ppc-support.patch
kexec: ppc support
crashdump-documentation.patch
crashdump: documentation
crashdump-memory-preserving-reboot-using-kexec.patch
crashdump: memory preserving reboot using kexec
crashdump-memory-preserving-reboot-using-kexec-fix.patch
kdump: Fix for boot problems on SMP
kdump-config_discontigmem-fix.patch
kdump: CONFIG_DISCONTIGMEM fix
crashdump-routines-for-copying-dump-pages.patch
crashdump: routines for copying dump pages
crashdump-routines-for-copying-dump-pages-kmap-fiddle.patch
crashdump-routines-for-copying-dump-pages-kmap-fiddle
crashdump-kmap-build-fix.patch
crashdump kmap build fix
crashdump-register-snapshotting-before-kexec-boot.patch
crashdump: register snapshotting before kexec boot
crashdump-elf-format-dump-file-access.patch
crashdump: ELF format dump file access
crashdump-linear-raw-format-dump-file-access.patch
crashdump: linear/raw format dump file access
crashdump-minor-bug-fixes-to-kexec-crashdump-code.patch
crashdump: minor bug fixes to kexec crashdump code
crashdump-cleanups-to-the-kexec-based-crashdump-code.patch
crashdump: cleanups to the kexec based crashdump code
x86-rename-apic_mode_exint.patch
x86: rename APIC_MODE_EXINT
x86-local-apic-fix.patch
x86: local apic fix
new-bitmap-list-format-for-cpusets.patch
new bitmap list format (for cpusets)
cpusets-big-numa-cpu-and-memory-placement.patch
cpusets - big numa cpu and memory placement
cpusets-fix-cpuset_get_dentry.patch
cpusets : fix cpuset_get_dentry()
cpusets-fix-race-in-cpuset_add_file.patch
cpusets: fix race in cpuset_add_file()
cpusets-remove-more-casts.patch
cpusets: remove more casts
cpusets-make-config_cpusets-the-default-in-sn2_defconfig.patch
cpusets: make CONFIG_CPUSETS the default in sn2_defconfig
cpusets-document-proc-status-allowed-fields.patch
cpusets: document proc status allowed fields
cpusets-dont-export-proc_cpuset_operations.patch
Cpusets - Dont export proc_cpuset_operations
cpusets-display-allowed-masks-in-proc-status.patch
cpusets: display allowed masks in proc status
cpusets-simplify-cpus_allowed-setting-in-attach.patch
cpusets: simplify cpus_allowed setting in attach
cpusets-remove-useless-validation-check.patch
cpusets: remove useless validation check
cpusets-config_cpusets-depends-on-smp.patch
Cpusets: CONFIG_CPUSETS depends on SMP
cpusets-tasks-file-simplify-format-fixes.patch
Cpusets tasks file: simplify format, fixes
cpusets-simplify-memory-generation.patch
Cpusets: simplify memory generation
cpusets-interoperate-with-hotplug-online-maps.patch
cpusets: interoperate with hotplug online maps
cpusets-alternative-fix-for-possible-race-in.patch
cpusets: alternative fix for possible race in cpuset_tasks_read()
cpusets-remove-casts.patch
cpusets: remove void* typecasts
reiser4-sb_sync_inodes.patch
reiser4: vfs: add super_operations.sync_inodes()
reiser4-allow-drop_inode-implementation.patch
reiser4: export vfs inode.c symbols
reiser4-truncate_inode_pages_range.patch
reiser4: vfs: add truncate_inode_pages_range()
reiser4-export-remove_from_page_cache.patch
reiser4: export pagecache add/remove functions to modules
reiser4-export-page_cache_readahead.patch
reiser4: export page_cache_readahead to modules
reiser4-reget-page-mapping.patch
reiser4: vfs: re-check page->mapping after calling try_to_release_page()
reiser4-rcu-barrier.patch
reiser4: add rcu_barrier() synchronization point
reiser4-export-inode_lock.patch
reiser4: export inode_lock to modules
reiser4-export-pagevec-funcs.patch
reiser4: export pagevec functions to modules
reiser4-export-radix_tree_preload.patch
reiser4: export radix_tree_preload() to modules
reiser4-export-find_get_pages.patch
reiser4-radix-tree-tag.patch
reiser4: add new radix tree tag
reiser4-radix_tree_lookup_slot.patch
reiser4: add radix_tree_lookup_slot()
reiser4-perthread-pages.patch
reiser4: per-thread page pools
reiser4-include-reiser4.patch
reiser4: add to build system
reiser4-doc.patch
reiser4: documentation
reiser4-only.patch
reiser4: main fs
reiser4-recover-read-performance.patch
reiser4: recover read performance
reiser4-export-find_get_pages_tag.patch
reiser4-export-find_get_pages_tag
reiser4-add-missing-context.patch
add-acpi-based-floppy-controller-enumeration.patch
Add ACPI-based floppy controller enumeration.
possible-dcache-bug-debugging-patch.patch
Possible dcache BUG: debugging patch
3c59x-reload-eeprom-values-at-rmmod-for-needy-cards.patch
3c59x: reload EEPROM values at rmmod for needy cards
3c59x-remove-eeprom_reset-for-3c905b.patch
3c59x: remove EEPROM_RESET for 3c905B
3c59x-add-eeprom_reset-for-3c900-boomerang.patch
3c59x: Add EEPROM_RESET for 3c900 Boomerang
3c59x-pm-fix.patch
3c59x: enable power management unconditionally
3c59x-missing-pci_disable_device.patch
3c59x: missing pci_disable_device
3c59x-use-netdev_priv.patch
3c59x: use netdev_priv
3c59x-make-use-of-generic_mii_ioctl.patch
3c59x: Make use of generic_mii_ioctl
3c59x-vortex-select-mii.patch
3c59x: VORTEX select MII
3c59x-support-more-ethtool_ops.patch
3c59x: support more ethtool_ops
serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
serial: add support for non-standard XTALs to 16c950 driver
add-support-for-possio-gcc-aka-pcmcia-siemens-mc45.patch
Add support for Possio GCC AKA PCMCIA Siemens MC45
new-serial-flow-control.patch
new serial flow control
mpsc-driver-patch.patch
serial: MPSC driver
generic-serial-cli-conversion.patch
generic-serial cli() conversion
specialix-io8-cli-conversion.patch
Specialix/IO8 cli() conversion
rio-cli-conversion.patch
RIO cli() conversion
rio_linux-64-bit-workaround.patch
rio_linux 64 bit workaround
sx-cli-conversion.patch
SX cli() conversion
revert-allow-oem-written-modules-to-make-calls-to-ia64-oem-sal-functions.patch
revert "allow OEM written modules to make calls to ia64 OEM SAL functions"
md-improve-hash-code-in-linearc.patch
md: improve 'hash' code in linear.c
md-add-interface-for-userspace-monitoring-of-events.patch
md: add interface for userspace monitoring of events.
make-acpi_bus_register_driver-consistent-with-pci_register_driver-again.patch
make acpi_bus_register_driver() consistent with pci_register_driver()
enforce-a-gap-between-heap-and-stack.patch
Enforce a gap between heap and stack
remove-lock_section-from-x86_64-spin_lock-asm.patch
remove LOCK_SECTION from x86_64 spin_lock asm
kfree_skb-dump_stack.patch
kfree_skb-dump_stack
for-mm-only-remove-remap_page_range-completely.patch
vm: for -mm only: remove remap_page_range() completely
cancel_rearming_delayed_work.patch
cancel_rearming_delayed_work()
make cancel_rearming_delayed_workqueue static
ipvs-deadlock-fix.patch
ipvs deadlock fix
minimal-ide-disk-updates.patch
Minimal ide-disk updates
no-buddy-bitmap-patch-revist-intro-and-includes.patch
no buddy bitmap patch revist: intro and includes
no-buddy-bitmap-patch-revisit-for-mm-page_allocc.patch
no buddy bitmap patch revisit: for mm/page_alloc.c
no-buddy-bitmap-patch-revisit-for-mm-page_allocc-fix.patch
no-buddy-bitmap-patch-revisit-for-mm-page_allocc fix
no-buddy-bitmap-patch-revist-for-ia64.patch
no buddy bitmap patch revist: for ia64
no-buddy-bitmap-patch-revist-for-ia64-fix.patch
no-buddy-bitmap-patch-revist-for-ia64 fix
use-find_trylock_page-in-free_swap_and_cache-instead-of-hand-coding.patch
use find_trylock_page in free_swap_and_cache instead of hand coding
fbdev-rivafb-should-recognize-nf2-igp.patch
fbdev: rivafb should recognize NF2/IGP
raid6-altivec-support.patch
raid6: altivec support
remove-export_symbol_novers.patch
Remove EXPORT_SYMBOL_NOVERS
figure-out-who-is-inserting-bogus-modules.patch
Figure out who is inserting bogus modules
use-mmiowb-in-qla1280c.patch
use mmiowb in qla1280.c
readpage-vs-invalidate-fix.patch
readpage-vs-invalidate fix
invalidate_inode_pages-mmap-coherency-fix.patch
invalidate_inode_pages2() mmap coherency fix
bug-on-error-handlings-in-ext3-under-i-o-failure.patch
BUG on error handlings in Ext3 under I/O failure condition
bug-on-error-handlings-in-ext3-under-i-o-failure-fix.patch
bug-on-error-handlings-in-ext3-under-i-o-failure fix
cputime-introduce-cputime.patch
cputime: introduce cputime
cputime-introduce-cputime-vs-move-accounting-function-calls-out-of-critical-vm-code-paths.patch
cputime-introduce-cputime-vs-move-accounting-function-calls-out-of-critical-vm-code-paths
cputime-fix-do_setitimer.patch
cputime: fix do_setitimer.
cputime-missing-pieces.patch
cputime: missing pieces.
mm-check_rlimit-oops-on-p-signal.patch
check_rlimit oops on p->signal
cputime-microsecond-based-cputime-for-s390.patch
cputime: microsecond based cputime for s390
detect-atomic-counter-underflows.patch
detect atomic counter underflows
lock-initializer-unifying-batch-2-alpha.patch
Lock initializer unifying: ALPHA
lock-initializer-unifying-batch-2-ia64.patch
Lock initializer unifying: IA64
lock-initializer-unifying-batch-2-m32r.patch
Lock initializer unifying: M32R
lock-initializer-unifying-batch-2-mips.patch
Lock initializer unifying: MIPS
lock-initializer-unifying-batch-2-misc-drivers.patch
Lock initializer unifying: Misc drivers
lock-initializer-unifying-batch-2-block-devices.patch
Lock initializer unifying: Block devices
lock-initializer-unifying-batch-2-drm.patch
Lock initializer unifying: DRM
lock-initializer-unifying-batch-2-character-devices.patch
Lock initializer unifying: character devices
lock-initializer-unifying-batch-2-rio.patch
Lock initializer unifying: RIO
lock-initializer-unifying-batch-2-firewire.patch
Lock initializer unifying: Firewire
lock-initializer-unifying-batch-2-isdn.patch
Lock initializer unifying: ISDN
lock-initializer-unifying-batch-2-raid.patch
Lock initializer unifying: Raid
lock-initializer-unifying-batch-2-media-drivers.patch
Lock initializer unifying: media drivers
lock-initializer-unifying-batch-2-drivers-serial.patch
Lock initializer unifying: drivers/serial
lock-initializer-unifying-batch-2-filesystems.patch
Lock initializer unifying: Filesystems
lock-initializer-unifying-batch-2-video.patch
Lock initializer unifying: Video
lock-initializer-unifying-batch-2-sound.patch
Lock initializer unifying: sound
lock-initializer-cleanup-common-headers.patch
Lock initializer cleanup (common headers)
lock-initializer-cleanup-character-devices.patch
Lock initializer cleanup (character devices)
lock-initializer-cleanup-core.patch
Lock initializer cleanup (Core)
moxa-update-status-of-moxa-smartio-driver.patch
moxa: Update status of Moxa Smartio driver
moxa-remove-ancient-changelog-readmemoxa.patch
moxa: Remove ancient changelog README.moxa
moxa-remove-readmemoxa-from-documentation-00-index.patch
moxa: Remove README.moxa from Documentation/00-INDEX
specialix-remove-bouncing-e-mail-address.patch
specialix: remove bouncing e-mail address
stallion-update-to-documentation-stalliontxt.patch
stallion: Update to Documentation/stallion.txt
riscom8-update-staus-and-documentation-of-driver.patch
riscom8: Update staus and documentation of driver
pm-remove-outdated-docs.patch
From: Pavel Machek <[email protected]>
Subject: pm: remove outdated docs
docs-add-sparse-howto.patch
From: Pavel Machek <[email protected]>
Subject: docs: add sparse howto
cciss-documentation-update.patch
cciss: Documentation update
cciss-correct-mailing-list-address-in-source-code.patch
cciss: Correct mailing list address in source code
cpqarray-correct-mailing-list-address-in-source-code.patch
cpqarray: Correct mailing list address in source code
sh-remove-x86-specific-help-in-kconfig.patch
sh: Remove x86-specific help in Kconfig
cyclades-put-readmecycladez-in-documentation-serial.patch
cyclades: Put README.cycladeZ in Documentation/serial
tipar-document-driver-options.patch
tipar: Document driver options
tipar-code-cleanup.patch
tipar: Code cleanup
update-hugetlb-documentation.patch
update hugetlb documentation
eth1394-module_parm-conversion.patch
eth1394 MODULE_PARM conversion
isapnp-module_param-conversion.patch
isapnp module_param conversion
sr-module_param-conversion.patch
sr module_param conversion
media-video-module_param-conversion.patch
media/video module_param conversion
btaudio-module_param-conversion.patch
btaudio module_param conversion
small-drivers-char-rio-cleanups-fwd.patch
small drivers/char/rio/ cleanups
small-char-generic_serialc-cleanup-fwd.patch
small char/generic_serial.c cleanup
debug_bugverbose-for-i386-fwd.patch
DEBUG_BUGVERBOSE for i386
telephony-ixjc-cleanup-fwd.patch
telephony/ixj.c cleanup
char-cycladesc-remove-unused-code-fwd.patch
char/cyclades.c: remove unused code
oss-ac97-quirk-facility.patch
oss: AC97 quirk facility
oss-ac97-quirk-facility-fix.patch
oss-ac97-quirk-facility fix
ext3-use-generic_open_file-to-fix-possible-preemption-bugs.patch
ext3: use generic_open_file to fix possible preemption bugs
bttv-i2cc-make-two-functions-static.patch
bttv-i2c.c: make two functions static
bttv-riscc-make-some-functions-static.patch
bttv-risc.c: make some functions static
bttv-help-fix.patch
bttv help fix
zoran_driverc-make-zoran_num_formats-static.patch
zoran_driver.c: make zoran_num_formats static
media-video-msp3400c-remove-unused-struct-d1.patch
media/video/msp3400.c: remove unused struct d1
zoran_devicec-make-zr36057_init_vfe-static.patch
zoran_device.c: make zr36057_init_vfe static
drivers-media-video-the-easy-cleanups.patch
drivers/media/video: the easy cleanups
small-ftape-cleanups-fwd.patch
small ftape cleanups
reiser3-cleanups.patch
reiser3 cleanups
cdromc-make-several-functions-static.patch
cdrom.c: make several functions static (fwd)
fs-coda-psdevc-shouldnt-include-lph.patch
fs/coda/psdev.c shouldn't include lp.h
remove-early_param-tests.patch
remove early_param test code
MODULE_PARM-allmod.patch
MODULE_PARM conversions
MODULE_PARM-allyes.patch
MODULE_PARM conversions
lockd-fix-two-struct-definitions.patch
lockd: fix two struct definitions
small-mca-cleanups-fwd.patch
small MCA cleanups
small-drivers-media-radio-cleanups-fwd.patch
small drivers/media/radio/ cleanups
ifdef-typos-arch_ppc_platforms_prep_setupc.patch
ifdef typos: arch_ppc_platforms_prep_setup.c
ifdef-typos-arch_ppc_platforms_prep_setupc-another-one.patch
ifdef typos: arch_ppc_platforms_prep_setup.c -another one
ifdef-typos-arch_ppc_syslib_ppc4xx_dmac.patch
ifdef typos: arch_ppc_syslib_ppc4xx_dma.c
ifdef-typos-arch_sh_boards_renesas_hs7751rvoip_ioc.patch
ifdef typos: arch_sh_boards_renesas_hs7751rvoip_io.c
ifdef-typos-drivers_char_ipmi_ipmi_si_intfc.patch
ifdef typos: drivers_char_ipmi_ipmi_si_intf.c
ifdef-typos-drivers_net_wireless_wavelan_csc.patch
ifdef typos: drivers_net_wireless_wavelan_cs.c
ifdef-typos-drivers_usb_net_usbnetc.patch
ifdef typos: drivers_usb_net_usbnet.c
ifdef-typos-mips-au100_usb_device.patch
ifdef typos mips: AU1[0X]00_USB_DEVICE
ipmi-use-c99-struct-inits.patch
IPMI: use C99 struct inits.
drm-remove-unused-functions-fwd.patch
DRM: remove unused functions
floppyc-remove-an-unused-function-fwd.patch
floppy.c: remove an unused function
media-video-ir-kbd-i2cc-remove-an-unused-function-fwd.patch
media/video/ir-kbd-i2c.c: remove an unused function
nfs-remove-an-unused-function-fwd.patch
NFS: remove an unused function
watchdog-machzwdc-remove-unused-functions-fwd.patch
watchdog/machzwd.c: remove unused functions
video-drivers-remove-unused-functions-fwd.patch
video drivers: remove unused functions
isdn-b1pcmciac-remove-an-unused-variable-fwd.patch
ISDN b1pcmcia.c: remove an unused variable
binfmt_scriptc-make-struct-script_format-static-fwd.patch
binfmt_script.c: make struct script_format static
bioc-make-bio_destructor-static-fwd.patch
bio.c: make bio_destructor static
devpts-inodec-make-one-struct-static-fwd.patch
devpts/inode.c: make one struct static
small-proc_fs-cleanups-fwd.patch
small proc_fs cleanups
kernel-timerc-comment-typo.patch
Fix kernel/timer.c comment typo
mark-qnx4fs_rw-as-broken-fwd.patch
mark QNX4FS_RW as BROKEN
oss-remove-unused-functions-fwd.patch
OSS: remove unused functions
dvb-av7110_hwc-remove-unused-functions-fwd.patch
DVB av7110_hw.c: remove unused functions
schedc-remove-an-unused-macro-fwd.patch
sched.c: remove an unused macro
scsi-ahcic-remove-an-unused-function-fwd.patch
scsi/ahci.c: remove an unused function
scsi-aic7xxx-aic79xx_osmc-remove-an-unused-function-fwd.patch
scsi/aic7xxx/aic79xx_osm.c: remove an unused function
schedc-remove-an-unused-function-fwd.patch
sched.c: remove an unused function
prism54-small-prismcompat-cleanup-fwd.patch
prism54: small prismcompat cleanup
some-parport_pcc-cleanups-fwd.patch
some parport_pc.c cleanups
fix-typo-and-email-in-saktxt.patch
fix typo and email in SAK.txt
cris-remove-kernel-20-ifdefs-fwd.patch
cris: remove kernel 2.0 #ifdef's
afs-afs_voltypes-isnt-always-required-fwd.patch
AFS: afs_voltypes isn't always required
befs-if-0-two-unused-global-functions-fwd.patch
befs: #if 0 two unused global functions
binfmt_scriptc-make-em86_format-static.patch
binfmt_script.c: make em86_format static
remove-unused-include-asm-m68k-adb_mouseh.patch
remove unused include/asm-m68k/adb_mouse.h
scsi-aic7xxx-remove-two-useless-variables.patch
scsi/aic7xxx/: remove two useless variables
remove-in_string_c.patch
remove IN_STRING_C
remove-ct_to_secs-ct_to_usecs.patch
remove CT_TO_SECS()/CT_TO_USECS()
bttv-driverc-make-some-variables-static.patch
bttv-driver.c: make some variables static
arch-alpha-kconfig-kill-stale-reference-to-documentation-smptex.patch
arch/alpha/Kconfig: Kill stale reference to Documentation/smp.tex
init-initramfsc-make-unpack_to_rootfs-static.patch
init/initramfs.c: make unpack_to_rootfs static
oss-misc-cleanups.patch
OSS: misc cleanups
inux-269-fs-proc-basec-array-size.patch
fs/proc/base.c: array size
linux-269-fs-proc-proc_ttyc-avoid-array.patch
fs/proc/proc_tty.c: avoid array
optimize-prefetch-usage-in-list_for_each_xxx.patch
optimize prefetch() usage in list_for_each_xxx
signalc-convert-assertion-to-bug_on.patch
signal.c: convert assertion to BUG_ON()
right-severity-level-for-fatal-message.patch
Right severity level for fatal message
remove-unused-drivers-char-rio-cdprotoh.patch
remove unused drivers/char/rio/cdproto.h
remove-unused-drivers-char-rsf16fmih.patch
remove unused drivers/char/rsf16fmi.h
mtd-added-nec-upd29f064115-support.patch
mtd: added NEC uPD29F064115 support
waiting-10s-before-mounting-root-filesystem.patch
retry mounting the root filesystem at boot time
ide-cd-is-very-noisy.patch
IDE CD is very noisy
signedness-fix-in-deadline-ioschedc.patch
signedness fix in deadline-iosched.c
cleanup-virtual-console-selectionc-interface.patch
cleanup virtual console <-> selection.c interface
warn-about-cli-sti-co-uses-even-on-up.patch
warn about cli, sti & co uses even on UP
remove-umsdos-from-tree.patch
remove umsdos from tree
kill-quota_v2c-printk-of-size_t-warning.patch
kill quota_v2.c printk() of size_t warning
kill-gen_init_cpioc-printk-of-size_t-warning.patch
kill gen_init_cpio.c printk() of size_t warning
silence-numerous-size_t-warnings-in-drivers-acpi-processor_idlec.patch
silence numerous size_t warnings in drivers/acpi/processor_idle.c
make-irda-string-tables-conditional-on-config_irda_debug.patch
make IRDA string tables conditional on CONFIG_IRDA_DEBUG
fix-unresolved-mtd-symbols-in-scx200_docflashc.patch
fix unresolved MTD symbols in scx200_docflash.c
fix-module_param-type-mismatch-in-drivers-char-n_hdlcc.patch
fix module_param() type mismatch in drivers/char/n_hdlc.c
drivers-char-misc-cleanups.patch
drivers/char/: misc cleanups
pktcdvd-make-two-functions-static.patch
pktcdvd: make two functions static
pktcdvd-grep-friendly-function-prototypes.patch
pktcdvd: grep-friendly function prototypes
pktcdvd-small-documentation-update.patch
pktcdvd: Small documentation update
isofs-remove-useless-include.patch
isofs: Remove useless include
synaptics-remove-unused-struct-member-variable.patch
synaptics: Remove unused struct member variable
periodically-scan-redzone-entries-and-slab-control-structures.patch
periodically scan redzone entries and slab control structures
kill-one-if-x-vfreex-usage.patch
kill one "if (X) vfree(X)" usage
smbfs-make-some-functions-static.patch
smbfs: make some functions static
Re: 2.6.10-mm2
Quoted 2 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10-mm2/
...
Quoted 4 lines
+kexec-kexecx86_64-4level-fix-unfix.patch
Hack to make
x86_64compile. Will break kexec.
It should be enough to just change the ->pml4 to ->pgd. Assuming that it worked with the original 4level patches.
Re: 2.6.10-mm2
In reply to Andrew MortonSurprisingly, this is what I get for 'make distclean':
scripts/Makefile.clean:10: fs/umsdos/Makefile: No such file or directory make[2]: *** No rule to make target `fs/umsdos/Makefile'. Stop. make[1]: *** [fs/umsdos] Error 2
make: *** [_clean_fs] Error 2
fs/umsdos is practically empty.
Signature · 2 lines
Eyal Lebedinsky ([email protected]) <http://samba.org/eyal/> If attaching .zip rename to .dat
Re: 2.6.10-mm2
Quoted 3 lines · Eyal Lebedinsky
scripts/Makefile.clean:10:fs/umsdos/Makefile: No such file or directory
make[2]: *** No rule to make target `fs/umsdos/Makefile'. Stop.
fs/Makefile renamed from fs/Makefile~remove-umsdos-from-tree-fix +0 -1
@@ -59,7 +59,6 @@ obj-$(CONFIG_HUGETLBFS) += hugetlbfs/ obj-$(CONFIG_CODA_FS) += coda/ obj-$(CONFIG_MINIX_FS) += minix/ obj-$(CONFIG_FAT_FS) += fat/ -obj-$(CONFIG_UMSDOS_FS) += umsdos/ obj-$(CONFIG_MSDOS_FS) += msdos/ obj-$(CONFIG_VFAT_FS) += vfat/ obj-$(CONFIG_BFS_FS) += bfs/
_
Re: 2.6.10-mm2
In reply to Eyal LebedinskyQuoted 8 lines · Eyal Lebedinsky
Surprisingly, this is what I get for 'make distclean':
scripts/Makefile.clean:10:fs/umsdos/Makefile: No such file or directory make[2]: *** No rule to make target `fs/umsdos/Makefile'. Stop. make[1]: *** [fs/umsdos] Error 2
make: *** [_clean_fs] Error 2fs/umsdos is practically empty.
I forgot to remove umsdos from fs/Makefile. Here's a patch:
fs/Makefile +0 -1
@@ -57,7 +57,6 @@ obj-$(CONFIG_CODA_FS) += coda/ obj-$(CONFIG_MINIX_FS) += minix/ obj-$(CONFIG_FAT_FS) += fat/ -obj-$(CONFIG_UMSDOS_FS) += umsdos/ obj-$(CONFIG_MSDOS_FS) += msdos/ obj-$(CONFIG_VFAT_FS) += vfat/ obj-$(CONFIG_BFS_FS) += bfs/
Re: 2.6.10-mm2
In reply to Andrew MortonOn Thu, 6 Jan 2005, Andrew Morton wrote:
..
Quoted 2 lines
drm-add-support-for-new-multiple-agp-bridge-agpgart-api.patch
drm: add support for new multiple agp bridge agpgart api
..
During compilation some missing files were found.
..
gcc -Wp,-MD,drivers/char/drm/.gamma_drv.o.d -nostdinc -isystem/usr/lib/gcc-lib/i486-linux/3.3.4/include -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -pipe -msoft-float -mpreferred-stack-boundary=2 -march=i686 -Iinclude/asm-i386/mach-default -DMODULE -DKBUILD_BASENAME=gamma_drv -DKBUILD_MODNAME=gamma -c -o drivers/char/drm/.tmp_gamma_drv.o drivers/char/drm/gamma_drv.cdrivers/char/drm/gamma_drv.c:39:22: drm_auth.h: No such file or directory drivers/char/drm/gamma_drv.c:40:28: drm_agpsupport.h: No such file or directory drivers/char/drm/gamma_drv.c:41:22: drm_bufs.h: No such file or directory In file included from drivers/char/drm/gamma_drv.c:42:drivers/char/drm/gamma_context.h: In function `gamma_context_switch_complete':
...drivers/char/drm/gamma_drv.c:43:21: drm_dma.h: No such file or directory In file included from drivers/char/drm/gamma_drv.c:44:drivers/char/drm/gamma_old_dma.h: In function `gamma_clear_next_buffer':
..drivers/char/drm/gamma_drv.c:45:26: drm_drawable.h: No such file or directory drivers/char/drm/gamma_drv.c:46:21: drm_drv.h: No such file or directory drivers/char/drm/gamma_drv.c:48:22: drm_fops.h: No such file or directory drivers/char/drm/gamma_drv.c:49:22: drm_init.h: No such file or directory drivers/char/drm/gamma_drv.c:50:23: drm_ioctl.h: No such file or directory drivers/char/drm/gamma_drv.c:51:21: drm_irq.h: No such file or directory
...drivers/char/drm/gamma_drv.c:53:22: drm_lock.h: No such file or directory
...
Re: 2.6.10-mm2
Quoted 14 lines
drivers/char/drm/gamma_drv.c:39:22:drm_auth.h: No such file or directorydrivers/char/drm/gamma_drv.c:40:28:drm_agpsupport.h: No such file or directorydrivers/char/drm/gamma_drv.c:41:22:drm_bufs.h: No such file or directory In file included fromdrivers/char/drm/gamma_drv.c:42:drivers/char/drm/gamma_context.h: In function `gamma_context_switch_complete':
...drivers/char/drm/gamma_drv.c:43:21:drm_dma.h: No such file or directory
In file included fromdrivers/char/drm/gamma_drv.c:44:drivers/char/drm/gamma_old_dma.h: In function `gamma_clear_next_buffer':
..drivers/char/drm/gamma_drv.c:45:26:drm_drawable.h: No such file or
Quoted 8 lines
directory
drivers/char/drm/gamma_drv.c:46:21:drm_drv.h: No such file or directorydrivers/char/drm/gamma_drv.c:48:22:drm_fops.h: No such file or directorydrivers/char/drm/gamma_drv.c:49:22:drm_init.h: No such file or directorydrivers/char/drm/gamma_drv.c:50:23:drm_ioctl.h: No such file or directorydrivers/char/drm/gamma_drv.c:51:21:drm_irq.h: No such file or directory
...drivers/char/drm/gamma_drv.c:53:22:drm_lock.h: No such file or directory
gamma drm is marked as broken with good reason..
Dave.
PATCH 1/1 m32r: build fix
In reply to Andrew MortonHi,
This patch is required to fix compile errors of 2.6.10-bk8 and 2.6.10-mm2 for m32r. Please apply.
This was originally given by the following patch:
[PATCH] move irq_enter and irq_exit to common code
http://www.ussg.iu.edu/hypermail/linux/kernel/0411.1/1738.html
I think it was maybe accidentally dropped only for the m32r arch due to a patching conflict with the other patches or something like that...
Thanks,
---
include/asm-m32r/hardirq.h +0 -12
@@ -27,18 +27,6 @@ typedef struct {# error HARDIRQ_BITS is too low!#endif -#define irq_enter () (preempt_count() += HARDIRQ_OFFSET) -#define nmi_enter () (irq_enter()) -#define nmi_exit () (preempt_count() -= HARDIRQ_OFFSET) - -#define irq_exit () \ -do { \ - preempt_count() -= IRQ_EXIT_OFFSET; \ - if (!in_interrupt() && softirq_pending(smp_processor_id())) \ - do_softirq(); \ - preempt_enable_no_resched(); \ -} while (0) -static inline void ack_bad_irq (int irq) {printk (KERN_CRIT "unexpected IRQ trap at vector %02x\n" , irq);
--
Hirokazu Takata <[email protected]>
Linux/M32R Project: http://www.linux-m32r.org/
Re: 2.6.10-mm2
In reply to Andrew MortonReview
Quoted 2 lines
(quoted diff) +2
-0+rio-cli-conversion.patch +rio_linux-64-bit-workaround.patch
RIO is totally broken on all plattforms, and rio-cli-conversion.patch makes it even more broken with things like:
-#define disable(oldspl) save_flags (oldspl) -#define restore(oldspl) restore_flags (oldspl) +#define disable(oldspl) local_irq_save(oldspl); +#define restore(oldspl) local_irq_restore(oldspl) ;
or
+ if (PortP->gs.flags & ASYNC_CLOSING){
+ interruptible_sleep_on(&PortP->gs.close_wait);
+ }
please drop rio-cli-conversion.patch and mark the driver BROKEN to wait a little before finally removing it unless it'll get a major rewrite.
Re: 2.6.10-mm2 error: redefinition of `struct cfq_io_context'
In reply to Andrew MortonQuoted 6 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10-mm2/
- Various minorish updates and fixes
CC init/do_mounts_md.o
In file included from include/linux/raid/md.h:21,
from init/do_mounts_md.c:2:
include/linux/blkdev.h:71: error: redefinition of `struct cfq_io_context' make[1]: *** [init/do_mounts_md.o] Error 1
make: *** [init] Error 2
Re: 2.6.10-mm2 error: redefinition of `struct cfq_io_context'
Quoted 9 lines · Helge Hafting
Quoted 7 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10-mm2/
- Various minorish updates and fixes
Quoted 6 lines
CC
init/do_mounts_md.o
In file included frominclude/linux/raid/md.h:21,from init/do_mounts_md.c:2:
include/linux/blkdev.h:71: error: redefinition of `structcfq_io_context' make[1]: *** [init/do_mounts_md.o] Error 1
make: *** [init] Error 2
Never mind, it was a patching error.
Helge Hafting
Re: 2.6.10-mm2
In reply to Andrew Morton-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10-mm2/
- Various minorish updates and fixes
The acpi_power_off issue (acpi_power_off is called but the laptop doesn't shut down) is back (in -mm1 already). I suspect it has never disappear completely:
maybe it only happens in some cenarios (like "only when AC is plugged in" or something like that). The report is done, I'll try to get more info soon (when does this happen and when it doesn't) and will report it by then.
Mind Booster Noori
- -- /* *************************************************************** */
Marcos Daniel Marado Torres AKA Mind Booster Noori
http://student.dei.uc.pt/~marado - [email protected]
() Join the ASCII ribbon campaign against html email, Microsoft
/\ attachments and Software patents. They endanger the World.
Sign a petition against patents: http://petition.eurolinux.org
/* *************************************************************** */ -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
Comment: Made with pgp4pine 1.76
iD8DBQFB3SnFmNlq8m+oD34RAk0+AJ97ZQZI0a+JuGT3uXG+w/sSjtcP6ACfVbCJ dP7EcQYa+xXN4OyuQpO4cvU=
=13Cu
-----END PGP SIGNATURE-----
acpi_power_off on 2.6.10-mm3 WAS: Re: 2.6.10-mm2
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 11 lines · Marcos D. Marado Torres
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10-mm2/
- Various minorish updates and fixes
The
acpi_power_offissue (acpi_power_offis called but the laptop doesn't shut down) is back (in -mm1 already). I suspect it has never disappear completely:
maybe it only happens in some cenarios (like "only when AC is plugged in" or something like that). The report is done, I'll try to get more info soon (when does this happen and when it doesn't) and will report it by then.
This still happens in -mm3.
I'll try to see which patch is breaking it...
Mind Booster Noori
- -- /* *************************************************************** */
Marcos Daniel Marado Torres AKA Mind Booster Noori
http://student.dei.uc.pt/~marado - [email protected]
() Join the ASCII ribbon campaign against html email, Microsoft
/\ attachments and Software patents. They endanger the World.
Sign a petition against patents: http://petition.eurolinux.org
/* *************************************************************** */ -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
Comment: Made with pgp4pine 1.76
iD8DBQFB493XmNlq8m+oD34RAjSXAJ0UeQfsEeBCje8GX9MJCJNw4RnUFwCg10yi zFdcErqu1E3CVYgvFZa3Thg=
=stjp
-----END PGP SIGNATURE-----
Re: 2.6.10-mm2
In reply to Andrew MortonQuoted 1 line · Andrew Morton
bk-kconfig.patch
Improves the search function in menuconfig - better display of what a symbol depends on / selects.
Also display the same information when getting help on a symbol.
Try it out next time you start up menuconfig.
Kudos to Roman Zippel for implementing the core functionality.
Sam
Re: 2.6.10-mm2
Quoted 10 lines · Sam Ravnborg
Quoted 1 line · Andrew Morton
bk-kconfig.patch
Improves the search function in menuconfig - better display of what a symbol depends on / selects.
Also display the same information when getting help on a symbol.Try it out next time you start up menuconfig.
Kudos to Roman Zippel for implementing the core functionality.
Very nice :-)
Thanks!
PATCH 1/1 fget_light/fput_light for ioctls
In reply to Andrew MortonHello!
With new unlocked_ioctl and ioctl_compat, ioctls can now be as fast as read/write.
So lets use fget_light/fput_light there, to get some speedup in common case on SMP.
mst
fs/compat.c +3 -2
@@ -431,8 +431,9 @@ asmlinkage long compat_sys_ioctl(unsignestruct file *filp;int error = -EBADF ;struct ioctl_trans *t; +int fput_needed; - filp =fget (fd); + filp =fget_light (fd, &fput_needed);if (!filp) goto out;
@@ -476,7 +479,7 @@ asmlinkage long compat_sys_ioctl(unsigne do_ioctl: error =sys_ioctl (fd, cmd, arg); out_fput: -fput (filp); +fput_light (file, fput_needed); out:return error; }
fs/ioctl.c +3 -2
@@ -80,8 +83,9 @@ asmlinkage long sys_ioctl(unsigned int fstruct file * filp;unsigned int flag;int on, error = -EBADF ; +int fput_needed; - filp =fget (fd); + filp =fget_light (fd, &fput_needed);if (!filp) goto out;
@@ -154,7 +158,7 @@ asmlinkage long sys_ioctl(unsigned int fbreak ; } out_fput: -fput (filp); +fput_light (filp, fput_needed); out:return error; }
PATCH 1/1 fget_light/fput_light for ioctls (fixed)
Hello!
Sorry, that patch had a typo. Here's an updated version.
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoting r. Michael S. Tsirkin ([email protected])
With new unlocked_ioctl and ioctl_compat, ioctls can now be as fast as read/write. So lets use fget_light/fput_light there, to get some speedup in common case on SMP.
mst
fs/compat.c +3 -2
@@ -431,8 +431,9 @@ asmlinkage long compat_sys_ioctl(unsignestruct file *filp;int error = -EBADF ;struct ioctl_trans *t; +int fput_needed; - filp =fget (fd); + filp =fget_light (fd, &fput_needed);if (!filp) goto out;
@@ -476,7 +479,7 @@ asmlinkage long compat_sys_ioctl(unsigne do_ioctl: error =sys_ioctl (fd, cmd, arg); out_fput: -fput (filp); +fput_light (filp, fput_needed); out:return error; }
fs/ioctl.c +3 -2
@@ -80,8 +83,9 @@ asmlinkage long sys_ioctl(unsigned int fstruct file * filp;unsigned int flag;int on, error = -EBADF ; +int fput_needed; - filp =fget (fd); + filp =fget_light (fd, &fput_needed);if (!filp) goto out;
@@ -154,7 +158,7 @@ asmlinkage long sys_ioctl(unsigned int fbreak ; } out_fput: -fput (filp); +fput_light (filp, fput_needed); out:return error; }
PATCH 1/1 2.6.10-mm2: remove umsdos MAINTAINERS entry
In reply to Andrew MortonWith umsdos gone, there's no longer a MAINTAINERS entry required.
MAINTAINERS renamed from MAINTAINERS.old +0 -7
@@ -2266,13 +2266,6 @@ W: http://linux-udf.sourceforge.net S: Maintained -UMSDOS FILESYSTEM -P: Matija Nalis -M: Matija Nalis <[email protected]> -L: [email protected] -W: http://linux.voyager.hr/umsdos/ -S: Maintained - UNIFORM CDROM DRIVER P: Jens Axboe M: [email protected]
PATCH 1/1 2.6.10-mm2: fix MTD_BLOCK2MTD dependency
In reply to Andrew MortonThe patch below fixes an obviously wrong dependency coming from Linus' tree.
drivers/mtd/devices/Kconfig renamed from drivers/mtd/devices/Kconfig.old +1 -1
@@ -127,7 +127,7 @@ config MTD_BLOCK2MTD tristate "MTD using block device (rewrite)" - depends on MTD || EXPERIMENTAL + depends on MTD && EXPERIMENTAL help This driver is basically the same at MTD_BLKMTD above, but experienced some interface changes plus serious speedups. In
Re: [patch] 2.6.10-mm2: fix MTD_BLOCK2MTD dependency
Quoted 3 lines · Adrian Bunk
The patch below fixes an obviously wrong dependency coming from Linus' tree.
Acked.
Thanks!
drivers/mtd/devices/Kconfig line 133
Quoted 13 lines
Signed-off-by Adrian Bunk <[email protected]>drivers/mtd/devices/Kconfig renamed from drivers/mtd/devices/Kconfig.old +1
-1@@ -127,7 +127,7 @@ config MTD_BLOCK2MTD tristate "MTD using block device (rewrite)" - depends on MTD || EXPERIMENTAL + depends on MTD && EXPERIMENTAL help This driver is basically the same at MTD_BLKMTD above, but experienced some interface changes plus serious speedups. In
Jörn
Signature · 3 lines
Fancy algorithms are buggier than simple ones, and they're much harder to implement. Use simple algorithms as well as simple data structures. -- Rob Pike
Re: 2.6.10-mm2
In reply to Andrew MortonAm Donnerstag, 6. Januar 2005 09:22 schrieben Sie:
Quoted 4 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10 -mm2/
- Various minorish updates and fixes
Booting with 2.6.10-mm2 results in:
Jan 6 18:05:39 t40 kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode Jan 6 18:05:39 t40 kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000004 Jan 6 18:05:39 t40 kernel: printing eip: Jan 6 18:05:39 t40 kernel: c02ae588 Jan 6 18:05:39 t40 kernel: *pde = 1dd40067 Jan 6 18:05:39 t40 kernel: *pte = 00000000 Jan 6 18:05:39 t40 kernel: Oops: 0000 [#1] Jan 6 18:05:39 t40 kernel: PREEMPT Jan 6 18:05:39 t40 kernel: Modules linked in: uhci_hcd irtty_sir sir_dev Jan 6 18:05:39 t40 kernel: CPU: 0 Jan 6 18:05:39 t40 kernel: EIP: 0060:[<c02ae588>] Not tainted VLI Jan 6 18:05:39 t40 kernel: EFLAGS: 00013246 (2.6.10-mm2-orig) Jan 6 18:05:39 t40 kernel: EIP is at agp_bind_memory+0x58/0x80 Jan 6 18:05:39 t40 kernel: eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000 Jan 6 18:05:39 t40 kernel: esi: dd8f5ac0 edi: 00000000 ebp: dd8f5b40 esp: df2d3f0c Jan 6 18:05:39 t40 kernel: ds: 007b es: 007b ss: 0068 Jan 6 18:05:39 t40 kernel: Process X (pid: 2357, threadinfo=df2d2000 task=df9ae060) Jan 6 18:05:39 t40 kernel: Stack: bffffa50 c0246fd4 00000000 c14fb800 df474ce0 c02ba20f df2d3f24 df2d3f24 Jan 6 18:05:39 t40 kernel: 00000000 00000004 00000001 00000000 c14fb800 00000036 c02ba180 c02b5ce5 Jan 6 18:05:39 t40 kernel: bffffa50 00000000 df2d3ef0 df2d3f58 df2d3f58 00000008 00000000 40086436 Jan 6 18:05:39 t40 kernel: Call Trace: Jan 6 18:05:39 t40 kernel: [<c0246fd4>] copy_from_user+0x34/0x70 Jan 6 18:05:39 t40 kernel: [<c02ba20f>] drm_agp_bind+0x8f/0xe0 Jan 6 18:05:39 t40 kernel: [<c02ba180>] drm_agp_bind+0x0/0xe0 Jan 6 18:05:39 t40 kernel: [<c02b5ce5>] drm_ioctl+0xe5/0x1bc Jan 6 18:05:39 t40 kernel: [<c0162a9a>] do_ioctl+0x6a/0x80 Jan 6 18:05:39 t40 kernel: [<c0162cb4>] sys_ioctl+0x74/0x1f0 Jan 6 18:05:39 t40 kernel: [<c0151c07>] sys_write+0x47/0x80 Jan 6 18:05:39 t40 kernel: [<c0102f11>] sysenter_past_esp+0x52/0x75 Jan 6 18:05:39 t40 kernel: Code: 8b 4e 20 8b 58 04 89 f0 ff 53 40 85 c0 75 09
c6 46 28 01 31 c0 89 7e 1c 8b 5c 24 08 8b 74 24 0c 8b 7c 24 10 83 c4 14 c3 8b 46 08 <8b> 40 04 ff 50 34 c6 46 29 01 eb c4 89 74 24 04 c7 04 24 80 6a
Y stays black, I need sysrq to reboot. mm1 works fine. 0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev
03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] (rev 02)
kernel config at
http://zodiac.dnsalias.org/misc/config-2.6.10-mm2
regards
Alex
Signature · 2 lines
Encrypted Mails welcome. PGP-Key at http://zodiac.dnsalias.org/misc/pgpkey.asc | Key-ID: 0x6D7DD291
Re: 2.6.10-mm2
Quoted 5 lines · El Thu, 6 Jan 2005 18:11:51 +0100 Alexander Gran <[email protected]>…
Y stays black, I need sysrq to reboot. mm1 works fine. 0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev
03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] (rev 02)
I was going to report that bug, too. Mine is a p3 with:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) 0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
and using x.org
Re: 2.6.10-mm2
Quoted 21 lines · On Thu, 6 Jan 2005 18:55:29 +0100 Diego Calleja <[email protected]> wrote:
Quoted 5 lines · El Thu, 6 Jan 2005 18:11:51 +0100 Alexander Gran <[email protected]>…
Y stays black, I need sysrq to reboot. mm1 works fine. 0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev
03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] (rev 02)I was going to report that bug, too. Mine is a p3 with:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) 0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
Quoted 1 line
and using x.org
You use via-agp. That's fine, since I get the same oops on nvidia-agp. So the common piece seems to be radeon drm.
The oops can be avoided by reverting agpgart-add-bridge-parameter-to-driver-functions.patch agpgart-allow-multiple-backends-to-be-initialized.patch drm-add-support-for-new-multiple-agp-bridge-agpgart-api.patch
Regards
(For some reason, ksymoops does't like my /proc/kallsyms)
ksymoops 2.4.9 on i686 2.6.10-mm2. Options used
-v /home/marc/source/kernel/tmp/linux-2.6.10-mm2/vmlinux (specified)
-k /home/marc/KALLSYMS (specified)
-l /home/marc/MODULES (specified)
-o /lib/modules/2.6.10-mm2 (specified)
-m /home/marc/source/kernel/tmp/linux-2.6.10-mm2/System.map (specified)Warning (read_ksyms): no kernel symbols in ksyms, is /home/marc/KALLSYMS a valid ksyms file? No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Unable to handle kernel NULL pointer dereference at virtual address 00000004 f88e68a8 *pde = 34401067 Oops: 0000 [#1] CPU: 0 EIP: 0060:[<f88e68a8>] Not tainted VLI
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00013246 (2.6.10-mm2)
eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: f5c154a0 edi: 00000000 ebp: f58a2320 esp: f6e43f1c
ds: 007b es: 007b ss: 0068
Stack: bffff2c0 c01c3df4 00000000 f7c16800 f7591ea0 f8948eac f8948d2f 00800000
00000001 00000000 00000001 00000000 f7c16800 00000036 f8948e20 f8944c15
bffff2c0 00000003 f6e42000 c01549cb 000002d0 f7fea880 c0308ac0 40086436
Call Trace:
[<c01c3df4>] copy_from_user+0x34/0x80
[<f8948eac>] drm_agp_bind+0x8c/0xe0 [drm]
[<f8948d2f>] drm_agp_alloc+0x10f/0x160 [drm]
[<f8948e20>] drm_agp_bind+0x0/0xe0 [drm]
[<f8944c15>] drm_ioctl+0xe5/0x1ab [drm]
[<c01549cb>] sys_fstat64+0x2b/0x30
[<f8944b30>] drm_ioctl+0x0/0x1ab [drm]
[<c015bad0>] do_ioctl+0x50/0x60
[<c015bc8e>] sys_ioctl+0x6e/0x1e0
[<c0102d99>] sysenter_past_esp+0x52/0x75
Code: 20 89 fa 8b 58 04 89 f0 ff 53 40 85 c0 75 09 c6 46 28 01 89 7e 1c 31 c0 8b 5c 24 08 8b 74 24 0c 8b 7c 24 10 83 c4 14 c3 8b 46 08 <8b> 40 04 ff 50 34 c6 46 29 01 eb c4 89 74 24 04 c7 04 24 5c 86 Quoted 5 lines
Quoted 5 lines
EIP;
f88e68a8<pg0+3851b8a8/3fc33400> <=====esi;
f5c154a0<pg0+3584a4a0/3fc33400>
ebp;f58a2320<pg0+354d7320/3fc33400>
esp;f6e43f1c<pg0+36a78f1c/3fc33400>
Trace; c01c3df4 <copy_from_user+34/80>
Trace; f8948eac <pg0+3857deac/3fc33400>
Trace; f8948d2f <pg0+3857dd2f/3fc33400>
Trace; f8948e20 <pg0+3857de20/3fc33400>
Trace; f8944c15 <pg0+38579c15/3fc33400>
Trace; c01549cb <sys_fstat64+2b/30>
Trace; f8944b30 <pg0+38579b30/3fc33400>
Trace; c015bad0 <do_ioctl+50/60>
Trace; c015bc8e <sys_ioctl+6e/1e0>
Trace; c0102d99 <sysenter_past_esp+52/75>
This architecture has variable length instructions, decoding before eip is unreliable, take these instructions with a pinch of salt.
Code; f88e687d <pg0+3851b87d/3fc33400>
00000000 <_EIP>:
Code; f88e687d <pg0+3851b87d/3fc33400>
0: 20 89 fa 8b 58 04 and %cl,0x4588bfa(%ecx)
Code; f88e6883 <pg0+3851b883/3fc33400>
6: 89 f0 mov %esi,%eax
Code; f88e6885 <pg0+3851b885/3fc33400>
8: ff 53 40 call *0x40(%ebx)
Code; f88e6888 <pg0+3851b888/3fc33400>
b: 85 c0 test %eax,%eax
Code; f88e688a <pg0+3851b88a/3fc33400>
d: 75 09 jne 18 <_EIP+0x18>
Code; f88e688c <pg0+3851b88c/3fc33400>
f: c6 46 28 01 movb $0x1,0x28(%esi)
Code; f88e6890 <pg0+3851b890/3fc33400>
13: 89 7e 1c mov %edi,0x1c(%esi)
Code; f88e6893 <pg0+3851b893/3fc33400>
16: 31 c0 xor %eax,%eax
Code; f88e6895 <pg0+3851b895/3fc33400>
18: 8b 5c 24 08 mov 0x8(%esp),%ebx
Code; f88e6899 <pg0+3851b899/3fc33400>
1c: 8b 74 24 0c mov 0xc(%esp),%esi
Code; f88e689d <pg0+3851b89d/3fc33400>
20: 8b 7c 24 10 mov 0x10(%esp),%edi
Code; f88e68a1 <pg0+3851b8a1/3fc33400>
24: 83 c4 14 add $0x14,%esp
Code; f88e68a4 <pg0+3851b8a4/3fc33400>
27: c3 ret
Code; f88e68a5 <pg0+3851b8a5/3fc33400>
28: 8b 46 08 mov 0x8(%esi),%eax
This decode from eip onwards should be reliable
Code; f88e68a8 <pg0+3851b8a8/3fc33400>
00000000 <_EIP>:
Code; f88e68a8 <pg0+3851b8a8/3fc33400> <=====
0: 8b 40 04 mov 0x4(%eax),%eax <=====
Code; f88e68ab <pg0+3851b8ab/3fc33400>
3: ff 50 34 call *0x34(%eax)
Code; f88e68ae <pg0+3851b8ae/3fc33400>
6: c6 46 29 01 movb $0x1,0x29(%esi)
Code; f88e68b2 <pg0+3851b8b2/3fc33400>
a: eb c4 jmp ffffffd0 <_EIP+0xffffffd0>
Code; f88e68b4 <pg0+3851b8b4/3fc33400>
c: 89 74 24 04 mov %esi,0x4(%esp)
Code; f88e68b8 <pg0+3851b8b8/3fc33400>
10: c7 .byte 0xc7
Code; f88e68b9 <pg0+3851b8b9/3fc33400>
11: 04 24 add $0x24,%al
Code; f88e68bb <pg0+3851b8bb/3fc33400>
13: 5c pop %esp
Code; f88e68bc <pg0+3851b8bc/3fc33400>
14: 86 .byte 0x86
1 warning issued. Results may not be reliable.
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1) 0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1) 0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) 0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) 0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) 0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) 0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) 0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) 0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) 0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1) 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) 0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) 0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
0000:01:07.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
0000:01:0a.0 Unknown mass storage controller: Promise Technology, Inc. 20268 (rev 02) 0000:01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:01:0d.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 61)
0000:02:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE]
Re: 2.6.10-mm2: swsusp regression
In reply to Andrew MortonQuoted 2 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10-mm2/
Quoted 2 lines
- Various minorish updates and fixes
There's an swsusp regression on my box (AMD64) wrt -mm1. Namely, 2.6.10-mm2 does not suspend, but hangs solid right after the critical section, 100% of the time.
Greets,
RJW
Signature · 3 lines
- Would you tell me, please, which way I ought to go from here? - That depends a good deal on where you want to get to. -- Lewis Carroll "Alice's Adventures in Wonderland"
Re: 2.6.10-mm2: swsusp regression
Hi!
Quoted 7 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10-mm2/
Quoted 2 lines
- Various minorish updates and fixes
There's an swsusp regression on my box (AMD64) wrt -mm1. Namely, 2.6.10-mm2 does not suspend, but hangs solid right after the critical section, 100% of the time.
can you comment out device_power_{down,up} from swsusp_{suspend,resume} and see what happens?
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Re: 2.6.10-mm2: swsusp regression
Quoted 3 lines · Pavel Machek
Hi!
Quoted 1 line
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10-mm2/
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
- Various minorish updates and fixes
There's an swsusp regression on my box (AMD64) wrt -mm1. Namely,
2.6.10-mm2
Quoted 1 line
Quoted 1 line
does not suspend, but hangs solid right after the critical section, 100%
of
Quoted 4 lines
Quoted 1 line
the time.
can you comment out device_power_{down,up} from
swsusp_{suspend,resume} and see what happens?
It works just fine.
Greets,
RJW
Signature · 3 lines
- Would you tell me, please, which way I ought to go from here? - That depends a good deal on where you want to get to. -- Lewis Carroll "Alice's Adventures in Wonderland"
Re: 2.6.10-mm2: swsusp regression
Hi!
Quoted 6 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10-mm2/
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
- Various minorish updates and fixes
There's an swsusp regression on my box (AMD64) wrt -mm1. Namely,
2.6.10-mm2
Quoted 8 lines
Quoted 1 line
Quoted 1 line
does not suspend, but hangs solid right after the critical section, 100%
of
Quoted 4 lines
Quoted 1 line
the time.
can you comment out device_power_{down,up} from
swsusp_{suspend,resume} and see what happens?It works just fine.
Ok, problem is that device_power_{down,up} is right thing, and neccessary for many machines to work...
...so... could you go through sysdev_register()s, one by one, commenting them to see which one causes the regression? That driver then needs to be fixed.
Go after mtrr and time in first places.
Pavel
PS: Probably drop andrew from reply; he probably gets enough mail anyway. I want this one to go to him so that he does not back up the patch, through.
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Re: 2.6.10-mm2: swsusp regression
Hi.
AMD64 doesn't have MTRRs, does it? If it does, I'd bet on an SMP hang.
Nigel
Quoted 29 lines · Pavel Machek
Hi!
Quoted 6 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10-mm2/
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
- Various minorish updates and fixes
There's an swsusp regression on my box (AMD64) wrt -mm1. Namely,
2.6.10-mm2
Quoted 8 lines
Quoted 1 line
Quoted 1 line
does not suspend, but hangs solid right after the critical section, 100%
of
Quoted 4 lines
Quoted 1 line
the time.
can you comment out device_power_{down,up} from
swsusp_{suspend,resume} and see what happens?It works just fine.
Ok, problem is that device_power_{down,up} is right thing, and neccessary for many machines to work...
...so... could you go through sysdev_register()s, one by one, commenting them to see which one causes the regression? That driver then needs to be fixed.
Go after mtrr and time in first places.
Pavel
PS: Probably drop andrew from reply; he probably gets enough mail anyway. I want this one to go to him so that he does not back up the patch, through.
Signature · 5 lines
Nigel Cunningham Software Engineer, Canberra, Australia http://www.cyclades.com Ph: +61 (2) 6292 8028 Mob: +61 (417) 100 574
Re: 2.6.10-mm2: swsusp regression
Hi!
Quoted 2 lines
AMD64 doesn't have MTRRs, does it? If it does, I'd bet on an SMP hang.
I bet AMD64 does have MTRRs. It is backward compatible to i386, remember?
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Re: 2.6.10-mm2: swsusp regression
Hi.
Quoted 7 lines · Pavel Machek
Hi!
Quoted 2 lines
AMD64 doesn't have MTRRs, does it? If it does, I'd bet on an SMP hang.
I bet AMD64 does have MTRRs. It is backward compatible to i386, remember?
Makes sense. I just have this idea that I was told it doesn't :> *shrug*
Nigel
Signature · 5 lines
Nigel Cunningham Software Engineer, Canberra, Australia http://www.cyclades.com Ph: +61 (2) 6292 8028 Mob: +61 (417) 100 574
Re: 2.6.10-mm2: swsusp regression
In reply to Pavel MachekQuoted 3 lines · Pavel Machek
Hi!
Quoted 1 line
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10-mm2/
Quoted 6 lines
Quoted 6 lines
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
- Various minorish updates and fixes
There's an swsusp regression on my box (AMD64) wrt -mm1. Namely,
2.6.10-mm2
Quoted 1 line
Quoted 1 line
does not suspend, but hangs solid right after the critical section,
100%
Quoted 10 lines
Quoted 7 lines
of
Quoted 4 lines
Quoted 1 line
the time.
can you comment out device_power_{down,up} from
swsusp_{suspend,resume} and see what happens?It works just fine.
Ok, problem is that device_power_{down,up} is right thing, and neccessary for many machines to work...
It's OK, as long as I know what to comment out. ;-)
Quoted 5 lines
..so... could you go through sysdev_register()s, one by one, commenting them to see which one causes the regression? That driver then needs to be fixed.
Go after mtrr and time in first places.
OK, but it'll take some time.
Quoted 4 lines
Pavel
PS: Probably drop andrew from reply; he probably gets enough mail anyway. I want this one to go to him so that he does not back up the patch, through.
OK
Greets,
RJW
Signature · 3 lines
- Would you tell me, please, which way I ought to go from here? - That depends a good deal on where you want to get to. -- Lewis Carroll "Alice's Adventures in Wonderland"
Re: 2.6.10-mm2: swsusp regression
Hi.
Quoted 7 lines · Rafael J. Wysocki
Quoted 5 lines
..so... could you go through sysdev_register()s, one by one, commenting them to see which one causes the regression? That driver then needs to be fixed.
Go after mtrr and time in first places.
OK, but it'll take some time.
There's an MTRR fix in the -overloaded ck patches. Perhaps it is what you're after. (Or perhaps it's already included :>)
http://kem.p.lodz.pl/~peter/cko/fixes/2.6.10-cko1-swsusp_fix.patch
Regards,
Nigel
Signature · 5 lines
Nigel Cunningham Software Engineer, Canberra, Australia http://www.cyclades.com Ph: +61 (2) 6292 8028 Mob: +61 (417) 100 574
Re: 2.6.10-mm2: swsusp regression
Quoted 7 lines · Nigel Cunningham
Hi.
Quoted 4 lines · Rafael J. Wysocki
Quoted 4 lines
..so... could you go through sysdev_register()s, one by one, commenting them to see which one causes the regression? That driver then needs to be fixed.
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
Go after mtrr and time in first places.
OK, but it'll take some time.
There's an MTRR fix in the -overloaded ck patches. Perhaps it is what you're after. (Or perhaps it's already included :>)
http://kem.p.lodz.pl/~peter/cko/fixes/2.6.10-cko1-swsusp_fix.patch
Thanks for pointing it out. I have adapted this patch to -mm2, but unfortunately it does not fix the issue. Still searching. ;-)
Greets,
RJW
Signature · 3 lines
- Would you tell me, please, which way I ought to go from here? - That depends a good deal on where you want to get to. -- Lewis Carroll "Alice's Adventures in Wonderland"
Re: 2.6.10-mm2: swsusp regression [update]
Quoted 12 lines · Rafael J. Wysocki
Quoted 11 lines · Nigel Cunningham
Hi.
Quoted 7 lines · Rafael J. Wysocki
Quoted 5 lines
..so... could you go through sysdev_register()s, one by one, commenting them to see which one causes the regression? That driver then needs to be fixed.
Go after mtrr and time in first places.
OK, but it'll take some time.
Quoted 7 lines
Quoted 4 lines
There's an MTRR fix in the -overloaded ck patches. Perhaps it is what you're after. (Or perhaps it's already included :>)
http://kem.p.lodz.pl/~peter/cko/fixes/2.6.10-cko1-swsusp_fix.patch
Thanks for pointing it out. I have adapted this patch to -mm2, but unfortunately it does not fix the issue. Still searching. ;-)
The regression is caused by the timer driver. Obviously, turning timer_resume() in arch/x86_64/kernel/time.c into a NOOP makes it go away.
It looks like a locking problem to me. I'll try to find a fix, although someone who knows more about these things would probably do it faster. :-)
Greets,
RJW
Signature · 3 lines
- Would you tell me, please, which way I ought to go from here? - That depends a good deal on where you want to get to. -- Lewis Carroll "Alice's Adventures in Wonderland"
Re: 2.6.10-mm2: swsusp regression [update]
Hi.
Quoted 5 lines · Rafael J. Wysocki
The regression is caused by the timer driver. Obviously, turning
timer_resume()inarch/x86_64/kernel/time.cinto a NOOP makes it go away.It looks like a locking problem to me. I'll try to find a fix, although someone who knows more about these things would probably do it faster. :-)
Can I get you to take a look at the patches I just posted; they might need some more work for x86_64, but may be helpful.
Regards,
Nigel
Signature · 5 lines
Nigel Cunningham Software Engineer, Canberra, Australia http://www.cyclades.com Ph: +61 (2) 6292 8028 Mob: +61 (417) 100 574
Re: 2.6.10-mm2: swsusp regression [update]
In reply to Rafael J. WysockiHi!
Quoted 8 lines
Quoted 2 lines
Thanks for pointing it out. I have adapted this patch to -mm2, but unfortunately it does not fix the issue. Still searching. ;-)
The regression is caused by the timer driver. Obviously, turning
timer_resume()inarch/x86_64/kernel/time.cinto a NOOP makes it go away.It looks like a locking problem to me. I'll try to find a fix, although someone who knows more about these things would probably do it faster. :-)
(I do not have time right now, but...)
...you might want to look at i386 time code, they have common ancestor, and i386 one seems to work.
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Re: 2.6.10-mm2: swsusp regression [update]
Quoted 8 lines · Pavel Machek
Hi!
Quoted 6 lines
Quoted 2 lines
Thanks for pointing it out. I have adapted this patch to -mm2, but unfortunately it does not fix the issue. Still searching. ;-)
The regression is caused by the timer driver. Obviously, turning
timer_resume()inarch/x86_64/kernel/time.cinto a NOOP makes it go away.
Quoted 7 lines
Quoted 2 lines
It looks like a locking problem to me. I'll try to find a fix, although someone who knows more about these things would probably do it faster. :-)
(I do not have time right now, but...)
..you might want to look at i386 time code, they have common ancestor, and i386 one seems to work.
Well, I need the help of The Wise. :-)
If I comment out only the modification of jiffies in timer_resume() in arch/x86_64/kernel/time.c (ie line 986), everything seems to work, but I get "APIC error on CPU0: 00(00)" after device_power_up(), which seems strange to me, because I boot with "noapic". On the other hand, if it's not commented out (ie jiffies _is_ modified in timer_resume()), the machine hangs solid after executing device_power_up() in swsusp_suspend().
Right now I have no idea of what happens there, and it seems strange because in 2.6.10-mm1 the code in time.c is the same.
Greets,
RJW
Signature · 3 lines
- Would you tell me, please, which way I ought to go from here? - That depends a good deal on where you want to get to. -- Lewis Carroll "Alice's Adventures in Wonderland"
Re: 2.6.10-mm2: swsusp regression [update]
Hi!
Quoted 14 lines
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
Thanks for pointing it out. I have adapted this patch to -mm2, but unfortunately it does not fix the issue. Still searching. ;-)
The regression is caused by the timer driver. Obviously, turning
timer_resume()inarch/x86_64/kernel/time.cinto a NOOP makes it go away.Quoted 7 lines
Quoted 2 lines
It looks like a locking problem to me. I'll try to find a fix, although someone who knows more about these things would probably do it faster. :-)
(I do not have time right now, but...)
..you might want to look at i386 time code, they have common ancestor, and i386 one seems to work.
Quoted 8 lines
Well, I need the help of The Wise. :-)
If I comment out only the modification of jiffies in
timer_resume()inarch/x86_64/kernel/time.c(ie line 986), everything seems to work, but I get "APIC error on CPU0: 00(00)" afterdevice_power_up(), which seems strange to me, because I boot with "noapic". On the other hand, if it's not commented out (ie jiffies _is_ modified intimer_resume()), the machine hangs solid after executingdevice_power_up()inswsusp_suspend().
Perhaps calling handle_lost_ticks() like timer_interrupt does is right thing to do?
Quoted 2 lines
Right now I have no idea of what happens there, and it seems strange because in 2.6.10-mm1 the code in
time.cis the same.
Well, but in -mm1, the code is not actually called, right?
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Re: 2.6.10-mm2: swsusp regression [update]
H,
On Saturday, 8 of January 2005 16:44, Pavel Machek wrote:
[-- snip --]
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
The regression is caused by the timer driver. Obviously, turning
timer_resume()inarch/x86_64/kernel/time.cinto a NOOP makes it go away.
[-- snip --]
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
..you might want to look at i386 time code, they have common ancestor, and i386 one seems to work.
Well, I've changed timer_resume() in arch/x86_64/kernel/time.c into the following function:
static int timer_resume(struct sys_device *dev)
{
unsigned long flags;
unsigned long sec;
unsigned long ctime = get_cmos_time();
long sleep_length = (ctime - sleep_start) * HZ;
if (vxtime.hpet_address)
hpet_reenable();
sec = ctime + clock_cmos_diff;
write_seqlock_irqsave(&xtime_lock,flags);
xtime.tv_sec = sec;
xtime.tv_nsec = 0;
write_sequnlock_irqrestore(&xtime_lock,flags);
printk ("jiffies = %lu, sleep_length = %ld\n", jiffies, sleep_length);
return 0;
}and that's what I get from the log:
Jan 12 19:43:42 albercik kernel: jiffies = 4294847120, sleep_length =
-3189288131000
(for example - the second number is always negative and huge). Would it mean that get_cmos_time() needs fixing?
Greets,
RJW
Signature · 3 lines
- Would you tell me, please, which way I ought to go from here? - That depends a good deal on where you want to get to. -- Lewis Carroll "Alice's Adventures in Wonderland"
Re: 2.6.10-mm2: swsusp regression [update]
Hi!
Quoted 11 lines
[-- snip --]
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
The regression is caused by the timer driver. Obviously, turning
timer_resume()inarch/x86_64/kernel/time.cinto a NOOP makes it go away.[-- snip --]
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
..you might want to look at i386 time code, they have common ancestor, and i386 one seems to work.
Well, I've changed
timer_resume()inarch/x86_64/kernel/time.cinto the following function:
Ugh, looking at arch/i386/kernel/time.c... "This could have never worked".
It does something like get_cmos_time() - get_cmos_time()*HZ. It looks seriously wrong.
Quoted 2 lines
(for example - the second number is always negative and huge). Would it mean that
get_cmos_time()needs fixing?
get_cmos_time() looks okay, but timer){suspend,resume} looks hopelessly broken.
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Re: 2.6.10-mm2: swsusp regression [update]
Quoted 5 lines · Pavel Machek
Hi!
Quoted 3 lines
[-- snip --]
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
The regression is caused by the timer driver. Obviously, turning
timer_resume()inarch/x86_64/kernel/time.cinto a NOOP makes it
go
Quoted 6 lines
Quoted 6 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
away.
[-- snip --]
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
..you might want to look at i386 time code, they have common ancestor, and i386 one seems to work.
Quoted 10 lines
Quoted 2 lines
Well, I've changed
timer_resume()inarch/x86_64/kernel/time.cinto the following function:Ugh, looking at
arch/i386/kernel/time.c... "This could have never worked".It does something like
get_cmos_time()- get_cmos_time()*HZ. It looks seriously wrong.Quoted 1 line
(for example - the second number is always negative and huge). Would it
mean
Quoted 4 lines
Quoted 1 line
that
get_cmos_time()needs fixing?
get_cmos_time()looks okay, but timer){suspend,resume} looks hopelessly broken.
Well, why don't we convert them to noops, then, at least temporarily?
RJW
Signature · 3 lines
- Would you tell me, please, which way I ought to go from here? - That depends a good deal on where you want to get to. -- Lewis Carroll "Alice's Adventures in Wonderland"
Re: 2.6.10-mm2: swsusp regression [update]
Hi!
Quoted 8 lines
Quoted 1 line
Quoted 1 line
(for example - the second number is always negative and huge). Would it
mean
Quoted 4 lines
Quoted 1 line
that
get_cmos_time()needs fixing?
get_cmos_time()looks okay, but timer){suspend,resume} looks hopelessly broken.Well, why don't we convert them to noops, then, at least temporarily?
Actually, it was my analysis that was wrong. Did you try Nigel's trick with updating wall_jiffies?
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Re: 2.6.10-mm2: swsusp regression [update]
Hi.
Quoted 6 lines · Pavel Machek
Hi!
Quoted 4 lines
Quoted 1 line
Quoted 1 line
(for example - the second number is always negative and huge). Would it
mean
Quoted 2 lines
Quoted 1 line
that
get_cmos_time()needs fixing?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
get_cmos_time()looks okay, but timer){suspend,resume} looks hopelessly broken.Well, why don't we convert them to noops, then, at least temporarily?
Actually, it was my analysis that was wrong. Did you try Nigel's trick with updating
wall_jiffies?
That bit's not mine.
Regards,
Nigel
Signature · 5 lines
Nigel Cunningham Software Engineer, Canberra, Australia http://www.cyclades.com Ph: +61 (2) 6292 8028 Mob: +61 (417) 100 574
Re: 2.6.10-mm2: swsusp regression [update]
In reply to Pavel MachekHi,
Quoted 3 lines · Pavel Machek
Hi!
Quoted 1 line
Quoted 1 line
Quoted 1 line
(for example - the second number is always negative and huge). Would
it
Quoted 10 lines
Quoted 7 lines
mean
Quoted 4 lines
Quoted 1 line
that
get_cmos_time()needs fixing?
get_cmos_time()looks okay, but timer){suspend,resume} looks hopelessly broken.Well, why don't we convert them to noops, then, at least temporarily?
Actually, it was my analysis that was wrong. Did you try Nigel's trick with updating
wall_jiffies?
Do you mean to add
wall_jiffies += (ctime - sleep_start) * HZ;
or an equivalent at the end of timer_resume()? I did and it helped a little. With it, the box hangs while executing device_resume() in swsusp_write(). Without it, the box hangs earlier.
Still, it's sleep_start that has a wrong value, apparently (it shouldn't be negative, at least), and I see that Nigel has a patch that changes __get_cmos_time() on x86_64. I'm going to try it in a couple of minutes.
Greets,
RJW
Signature · 3 lines
- Would you tell me, please, which way I ought to go from here? - That depends a good deal on where you want to get to. -- Lewis Carroll "Alice's Adventures in Wonderland"
Re: 2.6.10-mm2: swsusp regression [update]
Hi.
Quoted 3 lines · Rafael J. Wysocki
Still, it's
sleep_startthat has a wrong value, apparently (it shouldn't be negative, at least), and I see that Nigel has a patch that changes__get_cmos_time()onx86_64. I'm going to try it in a couple of minutes.
I sent a group of four patches, I think on Saturday. The first one is the one Pavel wrongly attributed to me. The other three are mine. I think you might need all four to get it working right.
Nigel
Signature · 5 lines
Nigel Cunningham Software Engineer, Canberra, Australia http://www.cyclades.com Ph: +61 (2) 6292 8028 Mob: +61 (417) 100 574
PATCH 1/1 Fix a bug in timer_suspend() on x86_64
Hi,
This patch is intended to fix a bug in timer_suspend() on x86_64 that causes hard lockups on suspend with swsusp and provide some optimizations. It is based on the Nigel Cunningham's patches to to reduce delay in arch/kernel/time.c. The patch is against 2.6.10-mm3 and 2.6.11-rc1. Please consider for applying.
--- linux-2.6.10-mm3-orig/arch/x86_64/kernel/time.c 2005-01-13
01:46:10.000000000 +0100
+++ linux-2.6.10-mm3/arch/x86_64/kernel/time.c 2005-01-13 01:32:05.000000000
+0100
@@ -955,16 +955,19 @@
__setup("report_lost_ticks", time_setup);
-static long clock_cmos_diff, sleep_start;
+static long clock_cmos_diff;
+static unsigned long sleep_start;
static int timer_suspend(struct sys_device *dev, u32 state) {
/*
* Estimate time zone so that set_time can update the clock */
- clock_cmos_diff = -get_cmos_time();
+ long cmos_time = get_cmos_time();
+
+ clock_cmos_diff = -cmos_time;
clock_cmos_diff += get_seconds();
- sleep_start = jiffies;
+ sleep_start = cmos_time;
return 0;
}
@@ -973,7 +976,7 @@
unsigned long flags;
unsigned long sec;
unsigned long ctime = get_cmos_time();
- unsigned long sleep_length = ctime - sleep_start;
+ unsigned long sleep_length = (ctime - sleep_start) * HZ;
if (vxtime.hpet_address)
hpet_reenable();
@@ -983,7 +986,8 @@
xtime.tv_sec = sec;
xtime.tv_nsec = 0; write_sequnlock_irqrestore(&xtime_lock,flags);
- jiffies += sleep_length * HZ;
+ jiffies += sleep_length;
+ wall_jiffies += sleep_length;
return 0;
}
Signature · 3 lines
- Would you tell me, please, which way I ought to go from here? - That depends a good deal on where you want to get to. -- Lewis Carroll "Alice's Adventures in Wonderland"
Re: [PATCH] Fix a bug in timer_suspend() on x86_64
Hi!
Quoted 7 lines
This patch is intended to fix a bug in
timer_suspend()onx86_64that causes hard lockups on suspend with swsusp and provide some optimizations. It is based on the Nigel Cunningham's patches to to reduce delay inarch/kernel/time.c. The patch is against 2.6.10-mm3 and 2.6.11-rc1. Please consider for applying.Signed-off-by Rafael J. Wysocki <[email protected]>
Acked-by: Pavel Machek.
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Nigel Cunningham
Acked-byRe: [PATCH] Fix a bug in timer_suspend() on x86_64
Quoted 11 lines · Pavel Machek
Hi!
Quoted 7 lines
This patch is intended to fix a bug in
timer_suspend()onx86_64that causes hard lockups on suspend with swsusp and provide some optimizations. It is based on the Nigel Cunningham's patches to to reduce delay inarch/kernel/time.c. The patch is against 2.6.10-mm3 and 2.6.11-rc1. Please consider for applying.Signed-off-by Rafael J. Wysocki <[email protected]>Acked-by Pavel Machek.
(If that's worth anything :>)
Signature · 5 lines
Nigel Cunningham Software Engineer, Canberra, Australia http://www.cyclades.com Ph: +61 (2) 6292 8028 Mob: +61 (417) 100 574
Re: [PATCH] Fix a bug in timer_suspend() on x86_64
In reply to Rafael J. WysockiQuoted 9 lines · Rafael J. Wysocki
Hi,
This patch is intended to fix a bug in
timer_suspend()onx86_64that causes hard lockups on suspend with swsusp and provide some optimizations. It is based on the Nigel Cunningham's patches to to reduce delay inarch/kernel/time.c. The patch is against 2.6.10-mm3 and 2.6.11-rc1. Please consider for applying.Signed-off-by Rafael J. Wysocki <[email protected]>
Thanks, Added to my tree.
-Andi
Re: 2.6.10-mm2: swsusp regression [update]
In reply to Rafael J. WysockiQuoted 4 lines · Rafael J. Wysocki
If I comment out only the modification of jiffies in
timer_resume()inarch/x86_64/kernel/time.c(ie line 986), everything seems to work, but I get "APIC error on CPU0: 00(00)" afterdevice_power_up(), which seems strange to me, because I boot with "noapic". On the other hand, if it's not commented
Actually, I saw this APIC error too (on i386, with "noapic"), but I ignored it because, aside from that message, all of my interrupt problems were gone and I had fully working swsusp for the first time in recorded history.
I should see what happens if I recompile with APIC support. Hopefully I'll be able to get to that today.
-Barry K. Nathan <[email protected]>
PATCH 1/1 2.6.10-mm2: move CPUSETS above EMBEDDED
In reply to Andrew MortonThe placement of CPUSETS somewhere in the middle of the EMBEDDED options breaks the EMBEDDED submenu (at least in menuconfig).
The patch below fixes this by simply moving CPUSETS above EMBEDDED.
diffstat output:
init/Kconfig | 21 ++++++++++----------- 1 files changed, 10 insertions(+), 11 deletions(-)
init/Kconfig renamed from init/Kconfig.old +10 -11
@@ -248,6 +248,16 @@ This option enables access to the kernel configuration file through /proc/config.gz. +config CPUSETS + bool "Cpuset support" + depends on SMP + help + This options will let you create and manage CPUSET's which + allow dynamically partitioning a system into sets of CPUs and + Memory Nodes and assigning tasks to run only within those sets. + This is primarily useful on large SMP or NUMA systems. + + Say N if unsure. menuconfig EMBEDDED bool "Configure standard kernel features (for small systems)"
@@ -302,17 +312,6 @@ Disabling this option will cause the kernel to be built without support for epoll family of system calls. -config CPUSETS - bool "Cpuset support" - depends on SMP - help - This options will let you create and manage CPUSET's which - allow dynamically partitioning a system into sets of CPUs and - Memory Nodes and assigning tasks to run only within those sets. - This is primarily useful on large SMP or NUMA systems. - - Say N if unsure. - config CC_OPTIMIZE_FOR_SIZE bool "Optimize for size" if EMBEDDED default y if ARM || H8300
Re: [patch] 2.6.10-mm2: move CPUSETS above EMBEDDED
Quoted 2 lines · Adrian
The placement of CPUSETS somewhere in the middle of the EMBEDDED options breaks the EMBEDDED submenu (at least in menuconfig).
Thanks for fixing this, Adrian. I was ignorant of this config ordering.
Signature · 3 lines
I won't rest till it's the best ...
Programmer, Linux Scalability
Paul Jackson <[email protected]> 1.650.933.1373, 1.925.600.0401PATCH 1/1 2.6.10-mm2: let I2C_ALGO_SGI depend on MIPS
In reply to Andrew MortonQuoted 5 lines · Andrew Morton
...
All 560 patches:
...
bk-i2c.patch
...
There's no reason for offering a MIPS-only driver on other architectures (even though it does compile).
Even better dependencies on specific MIPS variables might be possible that obsolete this patch, but this patch fixes at least the !MIPS case.
drivers/i2c/algos/Kconfig renamed from drivers/i2c/algos/Kconfig.old +1 -1
@@ -61,7 +61,7 @@ config I2C_ALGO_SGI tristate "I2C SGI interfaces" - depends on I2C + depends on I2C && MIPS help Supports the SGI interfaces like the ones found on SGI Indy VINO or SGI O2 MACE.
Re: [2.6 patch] 2.6.10-mm2: let I2C_ALGO_SGI depend on MIPS
Quoted 5 lines · Adrian Bunk
There's no reason for offering a MIPS-only driver on other architectures (even though it does compile).
Even better dependencies on specific MIPS variables might be possible that obsolete this patch, but this patch fixes at least the !MIPS case.
Please make that depend on SGI_IP22 || SGI_IP32 instead; the only machines actually using it.
Ladis, is VisWS using this algo also?
Ralf
Re: [2.6 patch] 2.6.10-mm2: let I2C_ALGO_SGI depend on MIPS
Quoted 6 lines · Ralf Baechle
Quoted 2 lines · Adrian Bunk
There's no reason for offering a MIPS-only driver on other architectures (even though it does compile).
Quoted 10 lines
Quoted 3 lines
Even better dependencies on specific MIPS variables might be possible that obsolete this patch, but this patch fixes at least the !MIPS case.
Please make that depend on
SGI_IP22||SGI_IP32instead; the only machines actually using it.Ladis, is VisWS using this algo also?
Since MACE is common part, it most likely does.
Quoted 4 lines
Ralf
Re: [2.6 patch] 2.6.10-mm2: let I2C_ALGO_SGI depend on MIPS
Quoted 14 lines · Ilya A. Volynets-Evenbakh
Quoted 12 lines · Ralf Baechle
Quoted 7 lines · Adrian Bunk
There's no reason for offering a MIPS-only driver on other architectures (even though it does compile).
Even better dependencies on specific MIPS variables might be possible that obsolete this patch, but this patch fixes at least the !MIPS case.
Quoted 7 lines
Quoted 6 lines
Please make that depend on
SGI_IP22||SGI_IP32instead; the only machines actually using it.Ladis, is VisWS using this algo also?
Since MACE is common part, it most likely does.
Ok, can someone send me the proper patch then?
thanks,
greg k-h
Re: [2.6 patch] 2.6.10-mm2: let I2C_ALGO_SGI depend on MIPS
Quoted 1 line · Greg KH
Ok, can someone send me the proper patch then?
Index: drivers/i2c/algos/Kconfig
===================================================================
RCS file: /home/cvs/linux/drivers/i2c/algos/Kconfig,v retrieving revision 1.3
i2c/algos/Kconfig +1 -1
@@ -61,7 +61,7 @@ config I2C_ALGO_SGI tristate "I2C SGI interfaces" - depends on I2C + depends on I2C && (SGI_IP22 || SGI_IP32 || X86_VISWS) help Supports the SGI interfaces like the ones found on SGI Indy VINO or SGI O2 MACE.
Greg KH
AppliedRe: [2.6 patch] 2.6.10-mm2: let I2C_ALGO_SGI depend on MIPS
Quoted 4 lines · Ladislav Michl
Quoted 1 line · Greg KH
Ok, can someone send me the proper patch then?
Index:
drivers/i2c/algos/Kconfig
Applied, thanks.
greg k-h
Re: 2.6.10-mm2
In reply to Andrew Morton-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi!
I get this ...
Unable to handle kernel NULL pointer dereference at virtual address 00000004
~ printing eip:c01c8e83
*pde = 0bfc6067
*pte = 00000000
Oops: 0000 [#1] Modules linked in: r128 iptable_nat ipt_state ip_conntrack iptable_filter ip_tables 8139too mii crc32 snd_ens1371 snd_rawmidi snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd snd_page_alloc gameport uhci_hcd via_agp floppy ide_cd cdrom CPU: 0 EIP: 0060:[<c01c8e83>] Not tainted VLI EFLAGS: 00013246 (2.6.10-mm2)
EIP is at agp_bind_memory+0x43/0x80
eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: cb0b0d20 edi: 00000000 ebp: 00000001 esp: cfb81f48
ds: 007b es: 007b ss: 0068
Process Xorg (pid: 4524, threadinfo=cfb81000 task=cd7215b0)
Stack: 00000000 cd4e2800 cc9f9440 c01d1f16 00000001 00000000 cd4e2800
00000036
~ c01d1ea0 c01cdf32 bffffb30 40086436 cd49d7e0 cbbd6e28 cd49d7e0c01cde60
~ 40086436 00000007 c01548d4 bffffb30 40086436 cd49d7e0 00000000c0154a8a
Call Trace: ~ [<c01d1f16>] drm_agp_bind+0x76/0xc0 ~ [<c01d1ea0>] drm_agp_bind+0x0/0xc0 ~ [<c01cdf32>] drm_ioctl+0xd2/0x189 ~ [<c01cde60>] drm_ioctl+0x0/0x189 ~ [<c01548d4>] do_ioctl+0x34/0x60 ~ [<c0154a8a>] sys_ioctl+0x6a/0x1c0 ~ [<c01022d7>] syscall_call+0x7/0xb Code: 29 00 74 24 8b 46 08 89 fa 8b 4e 20 8b 58 04 89 f0 ff 53 40 85 c0
75 0c c6 46 28 01 b8 00 00 00 00 89 7e 1c 5b 5e 5f c3 8b 46 08 <8b> 40 04 ff 50 34 c6 46 29 01 eb cd 56 68 40 30 27 c0 e8 66 99
- --
Ramón Rey Vicente <ramon.rey en hispalinux.es>
JID [email protected] - GPG public key id 0x9F28E377 GPG Fingerprint 0BC2 8014 2445 51E8 DE87 C888 C385 A9D3 9F28 E377 Planet AUGCyL - http://augcyl.org/planet/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFB3Z/Rw4Wp058o43cRAuUiAJ4hpg0dZHVSbZT2bdp87zdwB27ZPACgxQHO Rfo1bCjwIlMXd9P6yMhCdWY=
=sMmy
-----END PGP SIGNATURE-----
Re: 2.6.10-mm2
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10/2.6.10-mm2/
- Various minorish updates and fixes
Changes since 2.6.10-mm1:
When i launch neverball (3d games), X get killed and I have the following error in dmesg (3d card 9200SE, xserver : Xorg) :
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:drm_unlock] *ERROR* Process 10657 using kernel context 0
reverting the following patches solve the problem:
agpgart-add-bridge-parameter-to-driver-functions.patch agpgart-allow-multiple-backends-to-be-initialized.patch drm-add-support-for-new-multiple-agp-bridge-agpgart-api.patch
I tried the fix from Mike Werner, but it doesn't work in my case.
I can provide more information if needed.
regards,
Benoit
Re: 2.6.10-mm2
Quoted 6 lines · Benoit Boissinot
When i launch neverball (3d games), X get killed and I have the following error in dmesg (3d card 9200SE, xserver : Xorg) :
[drm:radeon_cp_init] *ERROR*
radeon_cp_initcalled without lock held[drm:drm_unlock] *ERROR* Process 10657 using kernel context 0
Same *ERROR* here on my Compaq Evo N600c (Radeon Mobility M6 LY). Xfree 4.3 from debian sarge doesn't crash but it's way too slow. Vanilla 2.6.10 works fine.
Regards,
Brice
Re: 2.6.10-mm2
Quoted 4 lines
Same *ERROR* here on my Compaq Evo N600c (Radeon Mobility M6 LY). Xfree 4.3 from debian sarge doesn't crash but it's way too slow. Vanilla 2.6.10 works fine.
Can you post a dmesg, config and lspci for -mm2? I'm having trouble figuring exactly the combination to mess it up..
Dave.
Re: 2.6.10-mm2
Quoted 9 lines · Dave Airlie
Quoted 3 lines
Same *ERROR* here on my Compaq Evo N600c (Radeon Mobility M6 LY). Xfree 4.3 from debian sarge doesn't crash but it's way too slow. Vanilla 2.6.10 works fine.
Can you post a dmesg, config and lspci for -mm2? I'm having trouble figuring exactly the combination to mess it up..
Dave.
Everything is attached.
I passed drm_debug=1 to the kernel. All the drm debug messages appear when I start X. Neverball is very slow (as if DRM was not enabled) but does not show any new debug.
Regards
Brice
Re: 2.6.10-mm2
In reply to Benoit BoissinotQuoted 7 lines
When i launch neverball (3d games), X get killed and I have the following error in dmesg (3d card 9200SE, xserver : Xorg) :
[drm:radeon_cp_init] *ERROR*
radeon_cp_initcalled without lock held[drm:drm_unlock] *ERROR* Process 10657 using kernel context 0
this looks like the agp backend isn't loading, Mike sent me parts of your .config but I lost the mail (don't drink and read e-mail...)
make sure that the correct backend for your chipset is loaded (throw a complete dmesg my way if you could.... I broke with tradition and actually tested -mm2 on my own machine there now and I have a Radeon 9200 on an intel agp ...
Dave.
Re: 2.6.10-mm2
Quoted 11 lines · Dave Airlie
Quoted 7 lines
When i launch neverball (3d games), X get killed and I have the following error in dmesg (3d card 9200SE, xserver : Xorg) :
[drm:radeon_cp_init] *ERROR*
radeon_cp_initcalled without lock held[drm:drm_unlock] *ERROR* Process 10657 using kernel context 0
this looks like the agp backend isn't loading, Mike sent me parts of your .config but I lost the mail (don't drink and read e-mail...)
if you look at the .config, agp and agp_via are not build as modules.
Quoted 5 lines
make sure that the correct backend for your chipset is loaded (throw a complete dmesg my way if you could.... I broke with tradition and actually tested -mm2 on my own machine there now and I have a Radeon 9200 on an intel agp ...
from dmesg, it looks like agp is correctly loaded.
Quoted 2 lines
Dave.
Actually the error I reported first occurs when X starts, it happens a second time when I launch neverball (and X get killed).
I attached a dmesg from right after X started, another after neverball was launched.
output of lsmod and .config are attached to.
Module Size Used by radeon 67008 0 drm 54548 1 radeon snd_seq 44688 0 snd_via82xx 20960 0 snd_ac97_codec 67936 1 snd_via82xx snd_pcm 75400 2 snd_via82xx,snd_ac97_codec snd_timer 19524 2 snd_seq,snd_pcm snd_page_alloc 7556 2 snd_via82xx,snd_pcm snd_mpu401_uart 5760 1 snd_via82xx snd_rawmidi 17344 1 snd_mpu401_uart snd_seq_device 6988 2 snd_seq,snd_rawmidi snd 40056 8 snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 6880 1 snd ide_cd 36164 0 cdrom 35424 1 ide_cd sk98lin 157088 0
Re: 2.6.10-mm2
Quoted 10 lines
Quoted 9 lines
Quoted 5 lines
[drm:radeon_cp_init] *ERROR*
radeon_cp_initcalled without lock held[drm:drm_unlock] *ERROR* Process 10657 using kernel context 0
this looks like the agp backend isn't loading, Mike sent me parts of your .config but I lost the mail (don't drink and read e-mail...)
it looks like agp_backend_acquire is returning NULL in this case, [drm:drm_ioctl] pid=10587, cmd=0x6430, nr=0x30, dev 0xe200, auth=1 [drm:drm_ioctl] ret = ffffffed
is the agp acquire ioctl and the return is -ENODEV
Any ideas Mike why that might happen?
Dave.
Re: 2.6.10-mm2
Quoted 6 lines · On Sun, 9 Jan 2005 00:42:03 +1100 Dave Airlie <[email protected]> wrote:
it looks like
agp_backend_acquireis returning NULL in this case, [drm:drm_ioctl] pid=10587, cmd=0x6430, nr=0x30, dev0xe200, auth=1 [drm:drm_ioctl] ret = ffffffed
is the agp acquire ioctl and the return is-ENODEVAny ideas Mike why that might happen?
Could this be the same issue discussed and fixed in another thread?
http://marc.theaimsgroup.com/?l=linux-kernel&m=110504486230527&w=2
Regards
Re: 2.6.10-mm2
Quoted 6 lines
Quoted 1 line
Any ideas Mike why that might happen?
Could this be the same issue discussed and fixed in another thread?
http://marc.theaimsgroup.com/?l=linux-kernel&m=110504486230527&w=2
that fix is needed anyways, but this happens before that...
Dave.
Re: 2.6.10-mm2
In reply to Dave AirlieQuoted 12 lines · Dave Airlie
Quoted 11 lines
Quoted 10 lines
Quoted 6 lines
[drm:radeon_cp_init] *ERROR*
radeon_cp_initcalled without lock held[drm:drm_unlock] *ERROR* Process 10657 using kernel context 0
this looks like the agp backend isn't loading, Mike sent me parts of your .config but I lost the mail (don't drink and read e-mail...)
Quoted 8 lines
it looks like
agp_backend_acquireis returning NULL in this case, [drm:drm_ioctl] pid=10587, cmd=0x6430, nr=0x30, dev0xe200, auth=1 [drm:drm_ioctl] ret = ffffffed
is the agp acquire ioctl and the return is-ENODEVAny ideas Mike why that might happen?
Dave.
If the bridge->agp_in_use is non-zero then drm_agp_acquire would return -ENODEV.
Previously it would return -EBUSY in this case but agp_backend_acquire now returns
a pointer to a bridge so there is no distinction made between existence and busy.
Re: 2.6.10-mm2
In reply to Benoit BoissinotQuoted 3 lines
if you look at the .config, agp and
agp_viaare not build as modules.
can you also try a build with vesafb turned off? I'm just wondering is there maybe a resource conflict or something like that going on ...
Dave.
Re: 2.6.10-mm2
Quoted 9 lines · Dave Airlie
Quoted 3 lines
if you look at the .config, agp and
agp_viaare not build as modules.can you also try a build with vesafb turned off? I'm just wondering is there maybe a resource conflict or something like that going on ...
Dave.
Removing the framebuffer from the boot command line solved it... (with the patch that Mike Werner posted ; without it, it oopsed).
Benoit.
Re: 2.6.10-mm2
Quoted 4 lines
Removing the framebuffer from the boot command line solved it... (with the patch that Mike Werner posted ; without it, it oopsed).
That's a bit weird as nothing should be different, I've just built vesafb into my kernel and booted and it works fine.. (with the oops patch...)
vesafb: framebuffer at 0xe0000000, mapped to 0xe0880000, using 3072k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=84
vesafb: protected mode interface info at c000:56cd
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: Processor [CPU1] (supports 8 throttling states) Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: AGP aperture is 128M @ 0x28000000
....
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.11.0 20020828 on minor 0:
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [drm] Loading R200 Microcode
all good here... I'm trying to see if this could be a via only issue, or something even more tricky....
If you could apply the patch I've attached (just adds some debug...) it'll narrow it down a small bit where it is failing for me...
Thanks,
Dave.
Re: 2.6.10-mm2
Quoted 10 lines · Dave Airlie
Quoted 4 lines
Removing the framebuffer from the boot command line solved it... (with the patch that Mike Werner posted ; without it, it oopsed).
That's a bit weird as nothing should be different, I've just built vesafb into my kernel and booted and it works fine.. (with the oops patch...)
Quoted 6 lines
all good here... I'm trying to see if this could be a via only issue, or something even more tricky....
If you could apply the patch I've attached (just adds some debug...) it'll narrow it down a small bit where it is failing for me...
A dmesg from a boot with the patch applied is attached.
just in case it matters, i use the following boot command line options :
video=vesa:mtrr vga=0x317
Benoit
Re: 2.6.10-mm2
Quoted 8 lines
Quoted 3 lines
If you could apply the patch I've attached (just adds some debug...) it'll narrow it down a small bit where it is failing for me...
A dmesg from a boot with the patch applied is attached.
just in case it matters, i use the following boot command line options :
video=vesa:mtrr vga=0x317
I'm seeing "agp_backend_acquire failed on atomic read" too. No command line options here.
Regards
Brice
Re: 2.6.10-mm2
Quoted 3 lines · Brice Goglin
Quoted 3 lines
Quoted 3 lines
If you could apply the patch I've attached (just adds some debug...) it'll narrow it down a small bit where it is failing for me...
I've another patch on top of -mm2 anyone wanna try this.. i'm interested in finding out when the atomic_inc actually is happening...
Dave.
Re: 2.6.10-mm2
Quoted 4 lines
I've another patch on top of -mm2 anyone wanna try this.. i'm interested in finding out when the
atomic_incactually is happening...Dave.
Hi,
I still only see "agp_backend_acquire failed on atomic read".
Regards
Brice
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: 2.6.10-mm2 solved
Quoted 7 lines · Dave Airlie
Quoted 1 line
I still only see "
agp_backend_acquirefailed on atomic read".do you see how many atomic inc and atomic decs there is?
send me the full dmesg...
thanks,
Dave.
The agp_in_use field of the bridge structure is never initialized. That's the reason why atomic_read fails to read 0.
In vanilla, the bridge is allocated as a static global variable, and thus initialized to 0 at init. In -mm, the bridge is kmalloc'ed, and thus not initialized.
The attached patch fixes it and solves my problem (when combined with
http://lkml.org/lkml/2005/1/7/377). DRM is back with good performance.
Regards
Brice
drivers/char/agp/backend.c renamed from drivers/char/agp/backend.c.orig +2 -0
@@ -235,6 +235,8 @@if (!bridge)return NULL ; +atomic_set (&bridge->agp_in_use,0 ); +if (list_empty (&agp_bridges)) agp_bridge = bridge;
Re: 2.6.10-mm2 solved
Quoted 2 lines
The attached patch fixes it and solves my problem (when combined with
http://lkml.org/lkml/2005/1/7/377). DRM is back with good performance.
Actually, this doesn't fix Benoit's problem (even if we were initially having the same errors (radeon_cp_init called without lock held)).
It seems that memsetting the whole bridge structure to 0 (instead of juste the agp_in_use field) fixes Benoit's problem too. No idea which field was responsible for this. New patch attached.
Regards,
Brice
drivers/char/agp/backend.c renamed from drivers/char/agp/backend.c.orig +2 -0
@@ -235,6 +235,8 @@if (!bridge)return NULL ; +memset (bridge,0 ,sizeof (*bridge)); +if (list_empty (&agp_bridges)) agp_bridge = bridge;
AGP Oops (was Re: 2.6.10-mm2)
In reply to Andrew MortonGot the following upon starting X (Debian sid's 4.3.0.dfsg.1-10). Was fine with 2.6.10-mm1. Radeon card, VIA AGP.
Unable to handle kernel NULL pointer dereference at virtual address 00000004 printing eip: c025a386 *pde = 78f84067 Oops: 0000 [#1] SMP CPU: 1 EIP: 0060:[<c025a386>] Not tainted VLI EFLAGS: 00013246 (2.6.10-mm2)
EIP is at agp_bind_memory+0x56/0x80
eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: f027c0e0 edi: 00000000 ebp: f027c3a0 esp: f6c83f10
ds: 007b es: 007b ss: 0068
Process XFree86 (pid: 2160, threadinfo=f6c83000 task=efc3aaa0)
Stack: bffffab0 c0214a04 00000000 c23ed000 f7d6ff40 c02645df 00000000 0000a1b6
00000000 00000000 00000001 00000000 00000036 c23ed000 c0264550 c025ffe5
bffffab0 f6c83f50 00000005 bffff95c f6c83000 efc3aaa0 086de8c0 40086436
Call Trace:
[<c0214a04>] copy_from_user+0x34/0x70
[<c02645df>] drm_agp_bind+0x8f/0xf0
[<c0264550>] drm_agp_bind+0x0/0xf0
[<c025ffe5>] drm_ioctl+0x105/0x201
[<c0163c1a>] do_ioctl+0x8a/0xb0
[<c0163e5a>] sys_ioctl+0x7a/0x200
[<c01025ad>] sysenter_past_esp+0x52/0x75
Code: 89 fa 8b 4e 20 8b 58 04 89 f0 ff 53 40 85 c0 75 07 c6 46 28 01 89 7e 1c 8b 5c 24 08 8b 74 24 0c 8b 7c 24 10 83 c4 14 c3 8b 46 08 <8b> 40 04 ff 50 34 c6 46 29 01 eb c6 89 74 24 04 c7 04 24 f4 d4Re: AGP Oops (was Re: 2.6.10-mm2)
Quoted 4 lines · Sean Neakums
Got the following upon starting X (Debian sid's 4.3.0.dfsg.1-10). Was fine with 2.6.10-mm1. Radeon card, VIA AGP.
Did you have this?
drivers/char/agp/generic.c renamed from drivers/char/agp/generic.c~agpgart-add-bridge-assignment-missed-in-agp_allocate_memory +1 -0
@@ -211,6 +211,7 @@ struct agp_memory *agp_allocate_memory(s new->memory[i] =virt_to_phys (addr); new->page_count++; } + new->bridge = bridge;flush_agp_mappings ();
_
Re: AGP Oops (was Re: 2.6.10-mm2)
Quoted 7 lines · Andrew Morton
Quoted 4 lines · Sean Neakums
Got the following upon starting X (Debian sid's 4.3.0.dfsg.1-10). Was fine with 2.6.10-mm1. Radeon card, VIA AGP.
Did you have this?
That fixes it. Thanks!
Quoted 11 lines
drivers/char/agp/generic.c renamed from drivers/char/agp/generic.c~agpgart-add-bridge-assignment-missed-in-agp_allocate_memory +1
-0@@ -211,6 +211,7 @@ struct agp_memory *agp_allocate_memory(s new->memory[i] =virt_to_phys (addr); new->page_count++; } + new->bridge = bridge;flush_agp_mappings ();_