Skip to contentSkip to conversation

arm64: dts: rockchip: Fix DWMMC clocks

PATCH New Robin Murphy 2 participants 4 messages Feb 15, 2018 – Feb 16, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 arm64: dts: rockchip: Fix DWMMC clocks

Trying to boot an RK3328 box with an HS200-capable eMMC, I see said eMMC fail to initialise as it can't run its tuning procedure, because the sample clock is missing. Upon closer inspection, whilst the clock is present in the DT, its name is subtly incorrect per the binding, so __of_clk_get_by_name() never finds it. By inspection, the drive clock suffers from a similar problem, so has never worked properly either.

Fix up all instances of the incorrect clock names across the 64-bit DTs.

---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 6 +++---
 arch/arm64/boot/dts/rockchip/rk3368.dtsi | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/rockchip/rk3328.dtsi +3 -3
index 822488bdf364..be2bfbc6b483 100644
@@ -730,7 +730,7 @@
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};
@@ -741,7 +741,7 @@
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};
@@ -752,7 +752,7 @@
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};
arch/arm64/boot/dts/rockchip/rk3368.dtsi +1 -1
index aa4d07046a7b..03458ac44201 100644
@@ -257,7 +257,7 @@
 		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
 			 <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		resets = <&cru SRST_SDIO0>;
Signature · 1 line
2.16.1.dirty
#1 lore raw

PATCH 2/2 ARM: dts: rockchip: Fix DWMMC clocks

Trying to boot an RK3328 box with an HS200-capable eMMC, I see said eMMC fail to initialise as it can't run its tuning procedure, because the sample clock is missing. Upon closer inspection, whilst the clock is present in the DT, its name is subtly incorrect per the binding, so __of_clk_get_by_name() never finds it. By inspection, the drive clock suffers from a similar problem, so has never worked properly either.

This error has propagated across the 32-bit DTs too, so fix those up.

---
 arch/arm/boot/dts/rk3036.dtsi | 4 ++--
 arch/arm/boot/dts/rk322x.dtsi | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)
arch/arm/boot/dts/rk3036.dtsi +2 -2
index 3b704cfed69a..a97458112ff6 100644
@@ -280,7 +280,7 @@
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		resets = <&cru SRST_SDIO>;
@@ -298,7 +298,7 @@
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		default-sample-phase = <158>;
 		disable-wp;
 		dmas = <&pdma 12>;
arch/arm/boot/dts/rk322x.dtsi +3 -3
index 780ec3a99b21..341deaf62ff6 100644
@@ -621,7 +621,7 @@
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
@@ -634,7 +634,7 @@
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
@@ -649,7 +649,7 @@
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		bus-width = <8>;
 		default-sample-phase = <158>;
 		fifo-depth = <0x100>;
Signature · 1 line
2.16.1.dirty
maintainer
#2 lore raw

PATCH 2/2 ARM: dts: rockchip: Fix DWMMC clocks

Am Donnerstag, 15. Februar 2018, 15:05:54 CET schrieb Robin Murphy:

Quoted 10 lines

Trying to boot an RK3328 box with an HS200-capable eMMC, I see said eMMC fail to initialise as it can't run its tuning procedure, because the sample clock is missing. Upon closer inspection, whilst the clock is present in the DT, its name is subtly incorrect per the binding, so __of_clk_get_by_name() never finds it. By inspection, the drive clock suffers from a similar problem, so has never worked properly either.

This error has propagated across the 32-bit DTs too, so fix those up.

added apropriate Fixes-tags and applied as fix for 4.16

Thanks
Heiko

maintainer
#3 lore raw

PATCH 1/2 arm64: dts: rockchip: Fix DWMMC clocks

In reply to Robin Murphy

Am Donnerstag, 15. Februar 2018, 15:05:53 CET schrieb Robin Murphy:

Quoted 10 lines

Trying to boot an RK3328 box with an HS200-capable eMMC, I see said eMMC fail to initialise as it can't run its tuning procedure, because the sample clock is missing. Upon closer inspection, whilst the clock is present in the DT, its name is subtly incorrect per the binding, so __of_clk_get_by_name() never finds it. By inspection, the drive clock suffers from a similar problem, so has never worked properly either.

Fix up all instances of the incorrect clock names across the 64-bit DTs.

added apropriate Fixes-tags and applied as fix for 4.16

Thanks
Heiko