Skip to contentSkip to conversation

8250_early: Too early for ioremap

RFC PATCH In review Gyorgy Jeney 2 participants 2 messages Jan 1, 2006 – Jan 4, 2006 TTY layer and serial drivers

lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 8250_early: Too early for ioremap

From: Gyorgy Jeney

Let the individual architectures define the function to use to remap the mmio- range that will be used by the 8250_early driver. This is needed because, the default, ioremap() is non-functional when the 8250_early driver initialises.

---

The 8250_early driver gets used early in the boot process, when the full-blown ioremap() function is still unavailible. The logical looking solution would be to simply s/ioremap/bt_ioremap/, s/iounmap/bt_iounmap/ but the only port in the 2.6.14 kernel that has that function is i386. Those functions look pretty generic so perhaps they could be moved to mm/bootmem.c or something but they rely on fixmap to be availibe which is only availible on 9 out of 25 archs. The best I could come up with is the attached "hack".

Since the mmio code does appear in 8250_early I'm guessing that it works for someone out there, which means this change is wrong.. How do I get 8250_early to use MMIO cleanly?

nog.

--- drivers/serial/8250_early.c 2005-10-28 02:02:08.000000000 +0200
+++ ../../linux-2.6.14/drivers/serial/8250_early.c 2006-01-01
14:40:28.000000000 +0100
@@ -34,6 +34,7 @@
#include <linux/serial.h>
#include <asm/io.h>
#include <asm/serial.h>
+#include <linux/serial_8250.h>

struct early_uart_device {
struct uart_port port;
@@ -148,7 +149,7 @@ static int __init parse_options(struct e
if (!strncmp(options, "mmio,", 5)) {
port->iotype = UPIO_MEM;
port->mapbase = simple_strtoul(options + 5, &options, 0);
- port->membase = ioremap(port->mapbase, mapsize);
+ port->membase = early_8250_ioremap(port->mapbase, mapsize);
if (!port->membase) {
printk(KERN_ERR "%s: Couldn't ioremap 0x%lx\n",
__FUNCTION__, port->mapbase);
@@ -248,7 +249,7 @@ static int __init early_uart_console_swi

unregister_console(&early_uart_console);
if (mmio)
- iounmap(port->membase);
+ early_8250_iounmap(port->membase, 64);

return 0;
}
--- include/linux/serial_8250.h 2005-10-28 02:02:08.000000000 +0200
+++ ../../linux-2.6.14/include/linux/serial_8250.h 2006-01-01
14:42:39.000000000 +0100
@@ -57,4 +57,16 @@ void serial8250_unregister_port(int line
void serial8250_suspend_port(int line);
void serial8250_resume_port(int line);

+/*
+ * Default ioremapping functions to use in the 8250_early driver. Individual
+ * architechtures may override these in include/asm/serial.h (to something more
+ * sane like bt_io{re,un}map).
+ */
+#ifndef early_8250_ioremap
+#define early_8250_ioremap(addr, len) ioremap(addr, len)
+#endif
+#ifndef early_8250_iounmap
+#define early_8250_iounmap(addr, len) iounmap(addr)
+#endif
+
#endif

#1 lore raw
Quoted 4 lines · Gyorgy Jeney

Let the individual architectures define the function to use to remap the mmio-range that will be used by the 8250_early driver. This is needed because, the default, ioremap() is non-functional when the 8250_early driver initialises.

Isn't there some other way this can be handled? Can't this be hidden in the architectures ioremap where it's a problem?

Signature · 3 lines
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 Serial core