Skip to contentSkip to conversation

loads and copyright

U-Boot-Users Martin Winistörfer 2 participants 2 messages Mar 10, 2003

lore
Share & tools
lore
#0 lore raw

hi,

I'm currently trying to test the "loads" command. For this I use a Kermit version. Since "loadb" uses the kermit protocol this works fine. But how do I download the file with the loads command? As I found out not in kermit mode. In the u-boot manual I found this as an example:

=> loads
## Ready for S-Record download ...
~>examples/hello_world.srec
1 2 3 4 5 6 7 8 9 10 11 ...
[file transfer complete]
[connected]
## Start Addr = 0x00040004

But what means "~>"?

An other more generic question concerns copyright of new source files. For the MPC5xx port I took for instance the start.S from the MPC8xx directory and made some changes.

But what is the best in your opinion, to place all the copyright from the previous owners also in the top of the new file or only my name.

Or shall I mention somewhere, from where this file is based? What is the common practise?

Sure it's not important but only to be correct.

Thanks,
Martin

Signature · 2 lines
+++ GMX - Mail, Messaging & more  http://www.gmx.net +++
Bitte l?cheln! Fotogalerie online mit GMX ohne eigene Homepage!
#1 lore raw
Quoted 6 lines · In message <[email protected]> you wrote:

I'm currently trying to test the "loads" command. For this I use a Kermit version. Since "loadb" uses the kermit protocol this works fine. But how do I download the file with the loads command? As I found out not in kermit mode. In the u-boot manual I found this as an example:

I think the same document also mentions to use the "cu" command (from the UUCP package) for S-Record download, doesn't it?

Quoted 1 line

But what means "~>"?

It's the "file send" command in the "cu" command. See "man cu".

Quoted 8 lines

An other more generic question concerns copyright of new source files. For the MPC5xx port I took for instance the start.S from the MPC8xx directory and made some changes.

But what is the best in your opinion, to place all the copyright from the previous owners also in the top of the new file or only my name.

If you use existing code (i. e. more than 5 or 6 lines), the copyright of the previous authors still applies. Please keep these copyright messages.

Best regards,

Wolfgang Denk

Signature · 6 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Is not that the nature of men and women -- that the  pleasure  is  in
the learning of each other?
	-- Natira, the High Priestess of Yonada, "For the World is
	   Hollow and I Have Touched the Sky", stardate 5476.3.