dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX
Subsystems (2)
PATCH 1/1 dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX
The CSI2RX subsystem uses PSI-L DMA to transfer frames to memory. It can have up to 32 threads per instance. J721S2 has two instances of the subsystem, so there are 64 threads total, Add them to the endpoint map.
---
Tested on J721S2 EVM on 6.8.0-rc1-next-20240124 for CSI2RX capture with
OV5640: https://gist.github.com/vaishnavachath/e6918ae4dadeb34c4cbad515bffcc558
drivers/dma/ti/k3-psil-j721s2.c | 73 +++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+)
drivers/dma/ti/k3-psil-j721s2.c +73 -0
@@ -57,6 +57,14 @@ }, \ } +#define PSIL_CSI2RX (x) \ + { \ + .thread_id = x, \ + .ep_config = { \ + .ep_type = PSIL_EP_NATIVE, \ + }, \ + } +/* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */ static struct psil_ep j721s2_src_ep_map[] = {/* PDMA_MCASP - McASP0-4 */
@@ -114,6 +122,71 @@ static struct psil_ep j721s2_src_ep_map[] = {PSIL_PDMA_XY_PKT (0x4707 ),PSIL_PDMA_XY_PKT (0x4708 ),PSIL_PDMA_XY_PKT (0x4709 ), +/* CSI2RX */ +PSIL_CSI2RX (0x4940 ), +PSIL_CSI2RX (0x4941 ), +PSIL_CSI2RX (0x4942 ), +PSIL_CSI2RX (0x4943 ), +PSIL_CSI2RX (0x4944 ), +PSIL_CSI2RX (0x4945 ), +PSIL_CSI2RX (0x4946 ), +PSIL_CSI2RX (0x4947 ), +PSIL_CSI2RX (0x4948 ), +PSIL_CSI2RX (0x4949 ), +PSIL_CSI2RX (0x494a ), +PSIL_CSI2RX (0x494b ), +PSIL_CSI2RX (0x494c ), +PSIL_CSI2RX (0x494d ), +PSIL_CSI2RX (0x494e ), +PSIL_CSI2RX (0x494f ), +PSIL_CSI2RX (0x4950 ), +PSIL_CSI2RX (0x4951 ), +PSIL_CSI2RX (0x4952 ), +PSIL_CSI2RX (0x4953 ), +PSIL_CSI2RX (0x4954 ), +PSIL_CSI2RX (0x4955 ), +PSIL_CSI2RX (0x4956 ), +PSIL_CSI2RX (0x4957 ), +PSIL_CSI2RX (0x4958 ), +PSIL_CSI2RX (0x4959 ), +PSIL_CSI2RX (0x495a ), +PSIL_CSI2RX (0x495b ), +PSIL_CSI2RX (0x495c ), +PSIL_CSI2RX (0x495d ), +PSIL_CSI2RX (0x495e ), +PSIL_CSI2RX (0x495f ), +PSIL_CSI2RX (0x4960 ), +PSIL_CSI2RX (0x4961 ), +PSIL_CSI2RX (0x4962 ), +PSIL_CSI2RX (0x4963 ), +PSIL_CSI2RX (0x4964 ), +PSIL_CSI2RX (0x4965 ), +PSIL_CSI2RX (0x4966 ), +PSIL_CSI2RX (0x4967 ), +PSIL_CSI2RX (0x4968 ), +PSIL_CSI2RX (0x4969 ), +PSIL_CSI2RX (0x496a ), +PSIL_CSI2RX (0x496b ), +PSIL_CSI2RX (0x496c ), +PSIL_CSI2RX (0x496d ), +PSIL_CSI2RX (0x496e ), +PSIL_CSI2RX (0x496f ), +PSIL_CSI2RX (0x4970 ), +PSIL_CSI2RX (0x4971 ), +PSIL_CSI2RX (0x4972 ), +PSIL_CSI2RX (0x4973 ), +PSIL_CSI2RX (0x4974 ), +PSIL_CSI2RX (0x4975 ), +PSIL_CSI2RX (0x4976 ), +PSIL_CSI2RX (0x4977 ), +PSIL_CSI2RX (0x4978 ), +PSIL_CSI2RX (0x4979 ), +PSIL_CSI2RX (0x497a ), +PSIL_CSI2RX (0x497b ), +PSIL_CSI2RX (0x497c ), +PSIL_CSI2RX (0x497d ), +PSIL_CSI2RX (0x497e ), +PSIL_CSI2RX (0x497f ),/* MAIN SA2UL */ PSIL_SA2UL (0x4a40 ,0 ), PSIL_SA2UL(0x4a41, 0),
Signature · 1 line
2.34.1
Thanks Vaishnav
Quoted 36 lines · Vaishnav Achath
The CSI2RX subsystem uses PSI-L DMA to transfer frames to memory. It can have up to 32 threads per instance. J721S2 has two instances of the subsystem, so there are 64 threads total, Add them to the endpoint map.
Signed-off-by Vaishnav Achath <[email protected]>---
Tested on J721S2 EVM on 6.8.0-rc1-next-20240124 for CSI2RX capture with
OV5640: https://gist.github.com/vaishnavachath/e6918ae4dadeb34c4cbad515bffcc558drivers/dma/ti/k3-psil-j721s2.c | 73 +++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+)drivers/dma/ti/k3-psil-j721s2.c +9
-0@@ -57,6 +57,14 @@ }, \ } +#define PSIL_CSI2RX (x) \ + { \ + .thread_id = x, \ + .ep_config = { \ + .ep_type = PSIL_EP_NATIVE, \ + }, \ + } +/* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */ static struct psil_ep j721s2_src_ep_map[] = {/* PDMA_MCASP - McASP0-4 */ @@ -114,6 +122,71 @@ static struct psil_ep j721s2_src_ep_map[] = {PSIL_PDMA_XY_PKT (0x4707 ),PSIL_PDMA_XY_PKT (0x4708 ), PSIL_PDMA_XY_PKT(0x4709), +/* CSI2RX */
drivers/dma/ti/k3-psil-j721s2.c static struct psil_ep j721s2_src_ep_map[] = { · line 135
Quoted 10 lines
drivers/dma/ti/k3-psil-j721s2.c +10
-0+PSIL_CSI2RX (0x4940 ), +PSIL_CSI2RX (0x4941 ), +PSIL_CSI2RX (0x4942 ), +PSIL_CSI2RX (0x4943 ), +PSIL_CSI2RX (0x4944 ), +PSIL_CSI2RX (0x4945 ), +PSIL_CSI2RX (0x4946 ), +PSIL_CSI2RX (0x4947 ), +PSIL_CSI2RX (0x4948 ), + PSIL_CSI2RX(0x4949),
Quoted 3 lines
drivers/dma/ti/k3-psil-j721s2.c +2
-0+PSIL_CSI2RX (0x494a ), + PSIL_CSI2RX(0x494b),
Quoted 5 lines · Vaishnav Achath
The CSI2RX subsystem uses PSI-L DMA to transfer frames to memory. It can have up to 32 threads per instance. J721S2 has two instances of the subsystem, so there are 64 threads total, Add them to the endpoint map.
Applied, thanks!
[1/1] dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX
commit: 93bdff7bb83a9ea79f41d4e48e1711fd5f4ec4ed
Best regards,
Signature · 1 line
~Vinod