erofs: introduce xattr name bloom filter
v2 cover erofs: introduce xattr name bloom filter
changes since RFC:
- the number of hash functions is 1, and now it's implemented as:
xxh32(name, strlen(name), EROFS_XATTR_FILTER_SEED + index),
where the constant magic number EROFS_XATTR_FILTER_SEED [*] is used to give a better spread for the mapping. (Alexander Larsson) Refer to patch 1 for more details.
- fix the value of EROFS_FEATURE_COMPAT_XATTR_BLOOM; rename EROFS_XATTR_BLOOM_* to EROFS_XATTR_FILTER_* (Gao Xiang)
- pass all tests in erofs-utils (MKFS_OPTIONS="--xattr-filter" make check)
[*] https://lore.kernel.org/all/[email protected]/
RFC: https://lore.kernel.org/all/[email protected]/
Background
==========
Filesystems with ACL enabled generally need to read "system.posix_acl_access"/"system.posix_acl_default" xattr to get the access and default ACL. When filesystem is mounted with ACL enabled while files in the system have not set access/default ACL, the getattr() will run in vain while the round trip can decrease the performance in workload like "ls -lR".
For example, there's a 12% performance boost if erofs is mounted with "noacl" when running "ls -lR" workload on dataset [1] (given in [2]).
We'd better offer a fastpath to boost the above workload, as well as other negative xattr lookup.
Proposal
========
Introduce a per-inode bloom filter for xattrs to boost the negative xattr queries.
As following shows, a 32-bit bloom filter is introduced for each inode, describing if a xattr with specific name exists on this inode.
```
struct erofs_xattr_ibody_header {
- __le32 h_reserved;
+ __le32 h_map; /* bloom filter */
...
}
```Following are some implementation details for bloom filter.
1. Reverse bit value
--------------------
The bloom filter structure describes if a given data is inside the set. It will map the given data into several bits of the bloom filter map. The data must not exist inside the set if any mapped bit is 0, while the data may be not inside the set even if all mapped bits is 1.
While in our use case, as erofs_xattr_ibody_header.h_map is previously a (all zero) reserved field, the bit value for the bloom filter has a reverse semantics in consideration for compatibility. That is, for a given data, the mapped bits will be cleared to 0. Thus for a previously built image without support for bloom filter, the bloom filter is all zero and when it's mounted by the new kernel with support for bloom filter, it can not determine if the queried xattr exists on the inode and thus will fallback to the original routine of iterating all on-disk xattrs to determine if the queried xattr exists.
2. The number of hash functions
-------------------------------
The optimal value for the number of the hash functions (k) is (ln2 * m/n), where m stands the number of bits of the bloom filter map, while n stands the number of all candidates may be inside the set.
In our use case, the number of common used xattr (n) is approximately 8, including system.[posix_acl_access|posix_acl_default], security.[capability|selinux] and security.[SMACK64|SMACK64TRANSMUTE|SMACK64EXEC|SMACK64MMAP].
Given the number of bits of the bloom filter (m) is 32, the optimal value for the number of the hash functions (k) is 2 (ln2 * m/n = 2.7).
3. The hash function
--------------------xxh32() is chosen as the hash function.
Following are some tested statistics of several candidate hash functions. Listed are time (in millionsecond) consumed when these hash functions process input data in chunks of 24, 32, 64 and 4096 bytes.
| 24 B | 32 B | 64 B | 4 KB --------+-------+-------+-------+------ jhash | 1325 | 2041 | 4016 | 2294 jhash2 | 1323 | 2035 | 4011 | 2310 crc16 | 7918 | 1056 | 2110 | 13784 crc32 | 1824 | 2436 | 4873 | 3107 crc32c | 2120 | 2708 | 5142 | 3109 xxhash | 1320 | 1967 | 2131 | 429 xxh32 | 1458 | 1358 | 1848 | 836 xxh64 | 1321 | 2081 | 2128 | 429
3.1. multiple hash functions with various seeds
-----------------------------------------------
As previously described, the given data will be mapped into several bits of the bloom filter map with hash functions. There could be several hash functions (k), with each hash function mapping the given data into one bit of the bloom filter map. Thus given the number of hash functions (k), each xattr name will be mapped into k bits of the bloom filter map.
Here in our use case, k hash functions are all xxh32() but with different seeds. As following shows, the seed is (index + i), where i stands the index of the current hash function among all hash functions. In this way, each hash function is distinguishable with others.
``` for (i = 0; i < k; i++) bit = xxh32(name, strlen(name), index + i); ```
3.2. input of hash function
-------------------------
As previously described, each hash function will map the given data into one bit of the bloom filter map. In our use case, xattr name serves as the key of hash function.
When .getxattr() gets called, only index (e.g. EROFS_XATTR_INDEX_USER) and the remaining name apart from the prefix are handy. To avoid constructing the full xattr name, the above index and name are fed into the hash function directly in the following way:
``` bit = xxh32(name, strlen(name), index + i); ```
where index serves as part of seed, so that it gets involved in the calculation for the hash.
An alternative way is to calculate the hash from the full xattr name by feeding the prefix string and the remaining name string separately in the following way:
``` xxh32_reset() xxh32_update(prefix string, ...) xxh32_update(remaining name, ...) xxh32_digest() ```
But I doubt if it really deserves to call multiple APIs instead of one single xxh32().
Also be noted that for xattrs with long xattr name prefixes, the above "name" is the xattr name after stripping the corresponding short predefined xattr name prefix rather than the long xattr name prefix, as only the former is handy in the kernel routine.
3.3. discussions
----------------
I think a wider discussion on the implementation details is needed, including the number of the hash functions, and all other implementation details mentioned above, as they are also part of the on-disk format.
Performance Improvement
=======================
The performance statistics are tested with 'ls -lR' workload upon the dataset [1].
| uncached(ms) | cached(ms)
------------------------+---------------+----------
erofs.share | 468 | 264
erofs.share.bloom | 370 | 254 erofs.share.noacl | 412 | 216
erofs.share.noacl.bloom | 318 | 206
The tested erofs image is built in shared xattr layout. It indicates ~20% performance improvement with bloom filter in uncached scenarios.
[1] https://my.owndrive.com/index.php/s/irHJXRpZHtT3a5i
[2] https://lore.kernel.org/all/[email protected]/
Jingbo Xu (2):
erofs: update on-disk format for xattr name filter
erofs: boost negative xattr lookup with bloom filter
fs/erofs/erofs_fs.h | 8 +++++++- fs/erofs/internal.h | 2 ++ fs/erofs/xattr.c | 12 ++++++++++++ 3 files changed, 21 insertions(+), 1 deletion(-)
Signature · 1 line
2.19.1.6.gb485710b
PATCH v2 1/2 erofs: update on-disk format for xattr name filter
The xattr name bloom filter feature is going to be introduced to speed up the negative xattr lookup, e.g. system.posix_acl_[access|default] lookup when running "ls -lR" workload.
The number of common used extended attributes (n) is approximately 30.
trusted.overlay.opaque
trusted.overlay.redirect
trusted.overlay.origin
trusted.overlay.impure
trusted.overlay.nlink
trusted.overlay.upper
trusted.overlay.metacopy
trusted.overlay.protattr
user.overlay.opaque
user.overlay.redirect
user.overlay.origin
user.overlay.impure
user.overlay.nlink
user.overlay.upper
user.overlay.metacopy
user.overlay.protattr
security.evm
security.ima
security.selinux
security.SMACK64
security.SMACK64IPIN
security.SMACK64IPOUT
security.SMACK64EXEC
security.SMACK64TRANSMUTE
security.SMACK64MMAP
security.apparmor
security.capability
system.posix_acl_access
system.posix_acl_default
user.mime_type
Given the number of bits of the bloom filter (m) is 32, the optimal value for the number of the hash functions (k) is 1 (ln2 * m/n = 0.74).
The single hash function is implemented as:
xxh32(name, strlen(name), EROFS_XATTR_FILTER_SEED + index)
where index represents the index of corresponding predefined short name prefix, while name represents the name string after stripping the above predefined name prefix.
The constant magic number EROFS_XATTR_FILTER_SEED, i.e. 0x25BBE08F, is used to give a better spread when mapping these 30 extended attributes into 32-bit bloom filter as:
bit 0: security.ima bit 1: bit 2: trusted.overlay.nlink bit 3: bit 4: user.overlay.nlink bit 5: trusted.overlay.upper bit 6: user.overlay.origin bit 7: trusted.overlay.protattr bit 8: security.apparmor bit 9: user.overlay.protattr
bit 10: user.overlay.opaque
bit 11: security.selinux
bit 12: security.SMACK64TRANSMUTE
bit 13: security.SMACK64
bit 14: security.SMACK64MMAP
bit 15: user.overlay.impure
bit 16: security.SMACK64IPIN
bit 17: trusted.overlay.redirect
bit 18: trusted.overlay.origin
bit 19: security.SMACK64IPOUT
bit 20: trusted.overlay.opaque
bit 21: system.posix_acl_default
bit 22:
bit 23: user.mime_type
bit 24: trusted.overlay.impure
bit 25: security.SMACK64EXEC
bit 26: user.overlay.redirect
bit 27: user.overlay.upper
bit 28: security.evm
bit 29: security.capability
bit 30: system.posix_acl_access
bit 31: trusted.overlay.metacopy, user.overlay.metacopy
The h_name_filter field is introduced to the on-disk per-inode xattr header to place the corresponding xattr name filter, where bit value 1 indicates non-existence for compatibility.
This feature is indicated by EROFS_FEATURE_COMPAT_XATTR_FILTER compatible feature bit.
--- fs/erofs/erofs_fs.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
fs/erofs/erofs_fs.h +7 -1
@@ -13,6 +13,7 @@#define EROFS_FEATURE_COMPAT_SB_CHKSUM 0x00000001#define EROFS_FEATURE_COMPAT_MTIME 0x00000002 +#define EROFS_FEATURE_COMPAT_XATTR_FILTER 0x00000004/* * Any bits that aren't in EROFS_ALL_FEATURE_INCOMPAT should
@@ -200,7 +201,7 @@ struct erofs_inode_extended {* for read-only fs, no need to introduce h_refcount */ struct erofs_xattr_ibody_header { -__le32 h_reserved; +__le32 h_name_filter;/* bit value 1 indicates not-present */ __u8 h_shared_count;__u8 h_reserved2[7 ];__le32 h_shared_xattrs[];/* shared xattr id array */
@@ -221,6 +222,11 @@ struct erofs_xattr_ibody_header {#define EROFS_XATTR_LONG_PREFIX 0x80#define EROFS_XATTR_LONG_PREFIX_MASK 0x7f +#define EROFS_XATTR_FILTER_BITS 32 +#define EROFS_XATTR_FILTER_MASK (EROFS_XATTR_FILTER_BITS - 1) +#define EROFS_XATTR_FILTER_DEFAULT UINT32_MAX +#define EROFS_XATTR_FILTER_SEED 0x25BBE08F +/* xattr entry (for both inline & shared xattrs) */ struct erofs_xattr_entry {__u8 e_name_len;/* length of name */
Signature · 1 line
2.19.1.6.gb485710b
Re: [PATCH v2 1/2] erofs: update on-disk format for xattr name filter
Quoted 5 lines · Jingbo Xu
The xattr name bloom filter feature is going to be introduced to speed up the negative xattr lookup, e.g. system.posix_acl_[access|default] lookup when running "ls -lR" workload.
The number of common used extended attributes (n) is approximately 30.
There are some commonly used extended attributes (n) and the total number of these is 31:
Quoted 32 lines
trusted.overlay.opaque
trusted.overlay.redirect
trusted.overlay.origin
trusted.overlay.impure
trusted.overlay.nlink
trusted.overlay.upper
trusted.overlay.metacopy
trusted.overlay.protattr
user.overlay.opaque
user.overlay.redirect
user.overlay.origin
user.overlay.impure
user.overlay.nlink
user.overlay.upper
user.overlay.metacopy
user.overlay.protattr
security.evm
security.ima
security.selinux
security.SMACK64
security.SMACK64IPIN
security.SMACK64IPOUT
security.SMACK64EXEC
security.SMACK64TRANSMUTE
security.SMACK64MMAP
security.apparmor
security.capability
system.posix_acl_access
system.posix_acl_default
user.mime_type
Quoted 8 lines
Given the number of bits of the bloom filter (m) is 32, the optimal value for the number of the hash functions (k) is 1 (ln2 * m/n = 0.74).
The single hash function is implemented as:
xxh32(name, strlen(name), EROFS_XATTR_FILTER_SEED + index)where index represents the index of corresponding predefined short name
where index...
Quoted 58 lines
prefix, while name represents the name string after stripping the above predefined name prefix.
The constant magic number
EROFS_XATTR_FILTER_SEED, i.e.0x25BBE08F, is used to give a better spread when mapping these 30 extended attributes into 32-bit bloom filter as:bit 0: security.ima bit 1: bit 2: trusted.overlay.nlink bit 3: bit 4: user.overlay.nlink bit 5: trusted.overlay.upper bit 6: user.overlay.origin bit 7: trusted.overlay.protattr bit 8: security.apparmor bit 9: user.overlay.protattrbit 10: user.overlay.opaque
bit 11: security.selinux
bit 12: security.SMACK64TRANSMUTE
bit 13: security.SMACK64
bit 14: security.SMACK64MMAP
bit 15: user.overlay.impure
bit 16: security.SMACK64IPIN
bit 17: trusted.overlay.redirect
bit 18: trusted.overlay.origin
bit 19: security.SMACK64IPOUT
bit 20: trusted.overlay.opaque
bit 21: system.posix_acl_default
bit 22:
bit 23: user.mime_type
bit 24: trusted.overlay.impure
bit 25: security.SMACK64EXEC
bit 26: user.overlay.redirect
bit 27: user.overlay.upper
bit 28: security.evm
bit 29: security.capability
bit 30: system.posix_acl_access
bit 31: trusted.overlay.metacopy, user.overlay.metacopyThe
h_name_filterfield is introduced to the on-disk per-inode xattr header to place the corresponding xattr name filter, where bit value 1 indicates non-existence for compatibility.This feature is indicated by
EROFS_FEATURE_COMPAT_XATTR_FILTERcompatible feature bit.Suggested-by Alexander Larsson <[email protected]>Signed-off-by Jingbo Xu <[email protected]>--- fs/erofs/erofs_fs.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)fs/erofs/erofs_fs.h +0
-0
fs/erofs/erofs_fs.h line 16
Quoted 4 lines
fs/erofs/erofs_fs.h +1
-0@@ -13,6 +13,7 @@#define EROFS_FEATURE_COMPAT_SB_CHKSUM 0x00000001#define EROFS_FEATURE_COMPAT_MTIME 0x00000002 +#define EROFS_FEATURE_COMPAT_XATTR_FILTER 0x00000004
I'd suggest that if we could leave one reserved byte in the superblock for now (and checking if it's 0) since
1) xattr filter feature is a compatible feature;
2) I'm not sure if the implementation could be changed.
so that later implementation changes won't bother compat bits again.
Quoted 13 lines
fs/erofs/erofs_fs.h +1
-1/* * Any bits that aren't in EROFS_ALL_FEATURE_INCOMPAT should @@ -200,7 +201,7 @@ struct erofs_inode_extended {* for read-only fs, no need to introduce h_refcount */ struct erofs_xattr_ibody_header { -__le32 h_reserved; +__le32 h_name_filter;/* bit value 1 indicates not-present */ __u8 h_shared_count;__u8 h_reserved2[7 ];__le32 h_shared_xattrs[];/* shared xattr id array */
fs/erofs/erofs_fs.h struct erofs_xattr_ibody_header { · line 226
Quoted 5 lines
fs/erofs/erofs_fs.h +2
-0@@ -221,6 +222,11 @@ struct erofs_xattr_ibody_header {#define EROFS_XATTR_LONG_PREFIX 0x80#define EROFS_XATTR_LONG_PREFIX_MASK 0x7f +#define EROFS_XATTR_FILTER_BITS 32 +#define EROFS_XATTR_FILTER_MASK (EROFS_XATTR_FILTER_BITS - 1)
Is this useful, we could just replace it to
(EROFS_XATTR_FILTER_BITS - 1) directly.
Otherwise it looks good to me,
Thanks,
Gao Xiang
Re: [PATCH v2 1/2] erofs: update on-disk format for xattr name filter
Quoted 126 lines · Gao Xiang
Quoted 5 lines · Jingbo Xu
The xattr name bloom filter feature is going to be introduced to speed up the negative xattr lookup, e.g. system.posix_acl_[access|default] lookup when running "ls -lR" workload.
The number of common used extended attributes (n) is approximately 30.
There are some commonly used extended attributes (n) and the total number of these is 31:
Quoted 32 lines
trusted.overlay.opaque
trusted.overlay.redirect
trusted.overlay.origin
trusted.overlay.impure
trusted.overlay.nlink
trusted.overlay.upper
trusted.overlay.metacopy
trusted.overlay.protattr
user.overlay.opaque
user.overlay.redirect
user.overlay.origin
user.overlay.impure
user.overlay.nlink
user.overlay.upper
user.overlay.metacopy
user.overlay.protattr
security.evm
security.ima
security.selinux
security.SMACK64
security.SMACK64IPIN
security.SMACK64IPOUT
security.SMACK64EXEC
security.SMACK64TRANSMUTE
security.SMACK64MMAP
security.apparmor
security.capability
system.posix_acl_access
system.posix_acl_default
user.mime_typeQuoted 8 lines
Given the number of bits of the bloom filter (m) is 32, the optimal value for the number of the hash functions (k) is 1 (ln2 * m/n = 0.74).
The single hash function is implemented as:
xxh32(name, strlen(name), EROFS_XATTR_FILTER_SEED + index)where index represents the index of corresponding predefined short name
where
index...Quoted 58 lines
prefix, while name represents the name string after stripping the above predefined name prefix.
The constant magic number
EROFS_XATTR_FILTER_SEED, i.e.0x25BBE08F, is used to give a better spread when mapping these 30 extended attributes into 32-bit bloom filter as:bit 0: security.ima bit 1: bit 2: trusted.overlay.nlink bit 3: bit 4: user.overlay.nlink bit 5: trusted.overlay.upper bit 6: user.overlay.origin bit 7: trusted.overlay.protattr bit 8: security.apparmor bit 9: user.overlay.protattrbit 10: user.overlay.opaque
bit 11: security.selinux
bit 12: security.SMACK64TRANSMUTE
bit 13: security.SMACK64
bit 14: security.SMACK64MMAP
bit 15: user.overlay.impure
bit 16: security.SMACK64IPIN
bit 17: trusted.overlay.redirect
bit 18: trusted.overlay.origin
bit 19: security.SMACK64IPOUT
bit 20: trusted.overlay.opaque
bit 21: system.posix_acl_default
bit 22:
bit 23: user.mime_type
bit 24: trusted.overlay.impure
bit 25: security.SMACK64EXEC
bit 26: user.overlay.redirect
bit 27: user.overlay.upper
bit 28: security.evm
bit 29: security.capability
bit 30: system.posix_acl_access
bit 31: trusted.overlay.metacopy, user.overlay.metacopyThe
h_name_filterfield is introduced to the on-disk per-inode xattr header to place the corresponding xattr name filter, where bit value 1 indicates non-existence for compatibility.This feature is indicated by
EROFS_FEATURE_COMPAT_XATTR_FILTERcompatible feature bit.Suggested-by Alexander Larsson <[email protected]>Signed-off-by Jingbo Xu <[email protected]>--- fs/erofs/erofs_fs.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)fs/erofs/erofs_fs.h +0
-0fs/erofs/erofs_fs.h line 16
Quoted 4 lines
fs/erofs/erofs_fs.h +1
-0@@ -13,6 +13,7 @@#define EROFS_FEATURE_COMPAT_SB_CHKSUM 0x00000001#define EROFS_FEATURE_COMPAT_MTIME 0x00000002 +#define EROFS_FEATURE_COMPAT_XATTR_FILTER 0x00000004I'd suggest that if we could leave one reserved byte in the superblock for now (and checking if it's 0) since
1) xattr filter feature is a compatible feature;
2) I'm not sure if the implementation could be changed.
Quoted 2 lines
so that later implementation changes won't bother compat bits again.
I would very much like to generate these bloom filters in composefs right now, before the composefs v1 format is completely locked down, and this should be fully possible given that this is a backwards compat change. But this is only possible if it doesn't require a feature flag like this that makes old erofs versions not mount the image.
Signature · 3 lines
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Alexander Larsson Red Hat, Inc
[email protected] [email protected]Re: [PATCH v2 1/2] erofs: update on-disk format for xattr name filter
Quoted 130 lines · Alexander Larsson
Quoted 126 lines · Gao Xiang
Quoted 5 lines · Jingbo Xu
The xattr name bloom filter feature is going to be introduced to speed up the negative xattr lookup, e.g. system.posix_acl_[access|default] lookup when running "ls -lR" workload.
The number of common used extended attributes (n) is approximately 30.
There are some commonly used extended attributes (n) and the total number of these is 31:
Quoted 32 lines
trusted.overlay.opaque
trusted.overlay.redirect
trusted.overlay.origin
trusted.overlay.impure
trusted.overlay.nlink
trusted.overlay.upper
trusted.overlay.metacopy
trusted.overlay.protattr
user.overlay.opaque
user.overlay.redirect
user.overlay.origin
user.overlay.impure
user.overlay.nlink
user.overlay.upper
user.overlay.metacopy
user.overlay.protattr
security.evm
security.ima
security.selinux
security.SMACK64
security.SMACK64IPIN
security.SMACK64IPOUT
security.SMACK64EXEC
security.SMACK64TRANSMUTE
security.SMACK64MMAP
security.apparmor
security.capability
system.posix_acl_access
system.posix_acl_default
user.mime_typeQuoted 8 lines
Given the number of bits of the bloom filter (m) is 32, the optimal value for the number of the hash functions (k) is 1 (ln2 * m/n = 0.74).
The single hash function is implemented as:
xxh32(name, strlen(name), EROFS_XATTR_FILTER_SEED + index)where index represents the index of corresponding predefined short name
where
index...Quoted 58 lines
prefix, while name represents the name string after stripping the above predefined name prefix.
The constant magic number
EROFS_XATTR_FILTER_SEED, i.e.0x25BBE08F, is used to give a better spread when mapping these 30 extended attributes into 32-bit bloom filter as:bit 0: security.ima bit 1: bit 2: trusted.overlay.nlink bit 3: bit 4: user.overlay.nlink bit 5: trusted.overlay.upper bit 6: user.overlay.origin bit 7: trusted.overlay.protattr bit 8: security.apparmor bit 9: user.overlay.protattrbit 10: user.overlay.opaque
bit 11: security.selinux
bit 12: security.SMACK64TRANSMUTE
bit 13: security.SMACK64
bit 14: security.SMACK64MMAP
bit 15: user.overlay.impure
bit 16: security.SMACK64IPIN
bit 17: trusted.overlay.redirect
bit 18: trusted.overlay.origin
bit 19: security.SMACK64IPOUT
bit 20: trusted.overlay.opaque
bit 21: system.posix_acl_default
bit 22:
bit 23: user.mime_type
bit 24: trusted.overlay.impure
bit 25: security.SMACK64EXEC
bit 26: user.overlay.redirect
bit 27: user.overlay.upper
bit 28: security.evm
bit 29: security.capability
bit 30: system.posix_acl_access
bit 31: trusted.overlay.metacopy, user.overlay.metacopyThe
h_name_filterfield is introduced to the on-disk per-inode xattr header to place the corresponding xattr name filter, where bit value 1 indicates non-existence for compatibility.This feature is indicated by
EROFS_FEATURE_COMPAT_XATTR_FILTERcompatible feature bit.Suggested-by Alexander Larsson <[email protected]>Signed-off-by Jingbo Xu <[email protected]>--- fs/erofs/erofs_fs.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)fs/erofs/erofs_fs.h +0
-0fs/erofs/erofs_fs.h line 16
Quoted 4 lines
fs/erofs/erofs_fs.h +1
-0@@ -13,6 +13,7 @@#define EROFS_FEATURE_COMPAT_SB_CHKSUM 0x00000001#define EROFS_FEATURE_COMPAT_MTIME 0x00000002 +#define EROFS_FEATURE_COMPAT_XATTR_FILTER 0x00000004I'd suggest that if we could leave one reserved byte in the superblock for now (and checking if it's 0) since
1) xattr filter feature is a compatible feature;
2) I'm not sure if the implementation could be changed.Quoted 2 lines
so that later implementation changes won't bother compat bits again.
Quoted 6 lines
I would very much like to generate these bloom filters in composefs right now, before the composefs v1 format is completely locked down, and this should be fully possible given that this is a backwards compat change. But this is only possible if it doesn't require a feature flag like this that makes old erofs versions not mount the image.
EROFS has two types of feature bits:
1) compat flags, which doesn't block mounting on old kernels;
2) incompat flags, which will block mounting on old kernels.
here bloom filter use a new compat flag, so old kernels will just ignore this and mount. compat flags just indicates that "an image with a feature, and you could use it or not".
Here I just meant the bloom filter internals are fixed for now, so that we might reserve a byte in the on-disk super block for later potential changes (if any). And don't need to bother another new compat flag.
Thanks,
Gao Xiang
Re: [PATCH v2 1/2] erofs: update on-disk format for xattr name filter
Quoted 146 lines · Gao Xiang
Quoted 130 lines · Alexander Larsson
Quoted 126 lines · Gao Xiang
Quoted 5 lines · Jingbo Xu
The xattr name bloom filter feature is going to be introduced to speed up the negative xattr lookup, e.g. system.posix_acl_[access|default] lookup when running "ls -lR" workload.
The number of common used extended attributes (n) is approximately 30.
There are some commonly used extended attributes (n) and the total number of these is 31:
Quoted 32 lines
trusted.overlay.opaque
trusted.overlay.redirect
trusted.overlay.origin
trusted.overlay.impure
trusted.overlay.nlink
trusted.overlay.upper
trusted.overlay.metacopy
trusted.overlay.protattr
user.overlay.opaque
user.overlay.redirect
user.overlay.origin
user.overlay.impure
user.overlay.nlink
user.overlay.upper
user.overlay.metacopy
user.overlay.protattr
security.evm
security.ima
security.selinux
security.SMACK64
security.SMACK64IPIN
security.SMACK64IPOUT
security.SMACK64EXEC
security.SMACK64TRANSMUTE
security.SMACK64MMAP
security.apparmor
security.capability
system.posix_acl_access
system.posix_acl_default
user.mime_typeQuoted 8 lines
Given the number of bits of the bloom filter (m) is 32, the optimal value for the number of the hash functions (k) is 1 (ln2 * m/n = 0.74).
The single hash function is implemented as:
xxh32(name, strlen(name), EROFS_XATTR_FILTER_SEED + index)where index represents the index of corresponding predefined short name
where
index...Quoted 58 lines
prefix, while name represents the name string after stripping the above predefined name prefix.
The constant magic number
EROFS_XATTR_FILTER_SEED, i.e.0x25BBE08F, is used to give a better spread when mapping these 30 extended attributes into 32-bit bloom filter as:bit 0: security.ima bit 1: bit 2: trusted.overlay.nlink bit 3: bit 4: user.overlay.nlink bit 5: trusted.overlay.upper bit 6: user.overlay.origin bit 7: trusted.overlay.protattr bit 8: security.apparmor bit 9: user.overlay.protattrbit 10: user.overlay.opaque
bit 11: security.selinux
bit 12: security.SMACK64TRANSMUTE
bit 13: security.SMACK64
bit 14: security.SMACK64MMAP
bit 15: user.overlay.impure
bit 16: security.SMACK64IPIN
bit 17: trusted.overlay.redirect
bit 18: trusted.overlay.origin
bit 19: security.SMACK64IPOUT
bit 20: trusted.overlay.opaque
bit 21: system.posix_acl_default
bit 22:
bit 23: user.mime_type
bit 24: trusted.overlay.impure
bit 25: security.SMACK64EXEC
bit 26: user.overlay.redirect
bit 27: user.overlay.upper
bit 28: security.evm
bit 29: security.capability
bit 30: system.posix_acl_access
bit 31: trusted.overlay.metacopy, user.overlay.metacopyThe
h_name_filterfield is introduced to the on-disk per-inode xattr header to place the corresponding xattr name filter, where bit value 1 indicates non-existence for compatibility.This feature is indicated by
EROFS_FEATURE_COMPAT_XATTR_FILTERcompatible feature bit.Suggested-by Alexander Larsson <[email protected]>Signed-off-by Jingbo Xu <[email protected]>--- fs/erofs/erofs_fs.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)fs/erofs/erofs_fs.h +0
-0fs/erofs/erofs_fs.h line 16
Quoted 4 lines
fs/erofs/erofs_fs.h +1
-0@@ -13,6 +13,7 @@#define EROFS_FEATURE_COMPAT_SB_CHKSUM 0x00000001#define EROFS_FEATURE_COMPAT_MTIME 0x00000002 +#define EROFS_FEATURE_COMPAT_XATTR_FILTER 0x00000004I'd suggest that if we could leave one reserved byte in the superblock for now (and checking if it's 0) since
1) xattr filter feature is a compatible feature;
2) I'm not sure if the implementation could be changed.Quoted 2 lines
so that later implementation changes won't bother compat bits again.
Quoted 6 lines
I would very much like to generate these bloom filters in composefs right now, before the composefs v1 format is completely locked down, and this should be fully possible given that this is a backwards compat change. But this is only possible if it doesn't require a feature flag like this that makes old erofs versions not mount the image.
EROFS has two types of feature bits:
1) compat flags, which doesn't block mounting on old kernels;
2) incompat flags, which will block mounting on old kernels.
Quoted 8 lines
here bloom filter use a new compat flag, so old kernels will just ignore this and mount. compat flags just indicates that "an image with a feature, and you could use it or not".
Here I just meant the bloom filter internals are fixed for now, so that we might reserve a byte in the on-disk super block for later potential changes (if any). And don't need to bother another new compat flag.
Cool. Then we're all good!
Signature · 3 lines
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Alexander Larsson Red Hat, Inc
[email protected] [email protected]Re: [PATCH v2 1/2] erofs: update on-disk format for xattr name filter
Quoted 151 lines · Alexander Larsson
Quoted 150 lines · Gao Xiang
Quoted 130 lines · Alexander Larsson
Quoted 126 lines · Gao Xiang
Quoted 5 lines · Jingbo Xu
The xattr name bloom filter feature is going to be introduced to speed up the negative xattr lookup, e.g. system.posix_acl_[access|default] lookup when running "ls -lR" workload.
The number of common used extended attributes (n) is approximately 30.
There are some commonly used extended attributes (n) and the total number of these is 31:
Quoted 32 lines
trusted.overlay.opaque
trusted.overlay.redirect
trusted.overlay.origin
trusted.overlay.impure
trusted.overlay.nlink
trusted.overlay.upper
trusted.overlay.metacopy
trusted.overlay.protattr
user.overlay.opaque
user.overlay.redirect
user.overlay.origin
user.overlay.impure
user.overlay.nlink
user.overlay.upper
user.overlay.metacopy
user.overlay.protattr
security.evm
security.ima
security.selinux
security.SMACK64
security.SMACK64IPIN
security.SMACK64IPOUT
security.SMACK64EXEC
security.SMACK64TRANSMUTE
security.SMACK64MMAP
security.apparmor
security.capability
system.posix_acl_access
system.posix_acl_default
user.mime_typeQuoted 8 lines
Given the number of bits of the bloom filter (m) is 32, the optimal value for the number of the hash functions (k) is 1 (ln2 * m/n = 0.74).
The single hash function is implemented as:
xxh32(name, strlen(name), EROFS_XATTR_FILTER_SEED + index)where index represents the index of corresponding predefined short name
where
index...Quoted 58 lines
prefix, while name represents the name string after stripping the above predefined name prefix.
The constant magic number
EROFS_XATTR_FILTER_SEED, i.e.0x25BBE08F, is used to give a better spread when mapping these 30 extended attributes into 32-bit bloom filter as:bit 0: security.ima bit 1: bit 2: trusted.overlay.nlink bit 3: bit 4: user.overlay.nlink bit 5: trusted.overlay.upper bit 6: user.overlay.origin bit 7: trusted.overlay.protattr bit 8: security.apparmor bit 9: user.overlay.protattrbit 10: user.overlay.opaque
bit 11: security.selinux
bit 12: security.SMACK64TRANSMUTE
bit 13: security.SMACK64
bit 14: security.SMACK64MMAP
bit 15: user.overlay.impure
bit 16: security.SMACK64IPIN
bit 17: trusted.overlay.redirect
bit 18: trusted.overlay.origin
bit 19: security.SMACK64IPOUT
bit 20: trusted.overlay.opaque
bit 21: system.posix_acl_default
bit 22:
bit 23: user.mime_type
bit 24: trusted.overlay.impure
bit 25: security.SMACK64EXEC
bit 26: user.overlay.redirect
bit 27: user.overlay.upper
bit 28: security.evm
bit 29: security.capability
bit 30: system.posix_acl_access
bit 31: trusted.overlay.metacopy, user.overlay.metacopyThe
h_name_filterfield is introduced to the on-disk per-inode xattr header to place the corresponding xattr name filter, where bit value 1 indicates non-existence for compatibility.This feature is indicated by
EROFS_FEATURE_COMPAT_XATTR_FILTERcompatible feature bit.Suggested-by Alexander Larsson <[email protected]>Signed-off-by Jingbo Xu <[email protected]>--- fs/erofs/erofs_fs.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)fs/erofs/erofs_fs.h +0
-0fs/erofs/erofs_fs.h line 16
Quoted 4 lines
fs/erofs/erofs_fs.h +1
-0@@ -13,6 +13,7 @@#define EROFS_FEATURE_COMPAT_SB_CHKSUM 0x00000001#define EROFS_FEATURE_COMPAT_MTIME 0x00000002 +#define EROFS_FEATURE_COMPAT_XATTR_FILTER 0x00000004I'd suggest that if we could leave one reserved byte in the superblock for now (and checking if it's 0) since
1) xattr filter feature is a compatible feature;
2) I'm not sure if the implementation could be changed.Quoted 2 lines
so that later implementation changes won't bother compat bits again.
Quoted 6 lines
I would very much like to generate these bloom filters in composefs right now, before the composefs v1 format is completely locked down, and this should be fully possible given that this is a backwards compat change. But this is only possible if it doesn't require a feature flag like this that makes old erofs versions not mount the image.
EROFS has two types of feature bits:
1) compat flags, which doesn't block mounting on old kernels;
2) incompat flags, which will block mounting on old kernels.here bloom filter use a new compat flag, so old kernels will just ignore this and mount. compat flags just indicates that "an image with a feature, and you could use it or not".
Quoted 6 lines
Quoted 4 lines
Here I just meant the bloom filter internals are fixed for now, so that we might reserve a byte in the on-disk super block for later potential changes (if any). And don't need to bother another new compat flag.
Cool. Then we're all good!
:)
Quoted 1 line
PATCH v2 2/2 erofs: boost negative xattr lookup with bloom filter
In reply to Jingbo XuThe bit value for the bloom filter map has a reverse semantics for compatibility. That is, the bit value of 0 indicates existence, while the bit value of 1 indicates the absence of corresponding xattr.
--- fs/erofs/internal.h | 2 ++ fs/erofs/xattr.c | 12 ++++++++++++ 2 files changed, 14 insertions(+)
fs/erofs/internal.h +2 -0
@@ -251,6 +251,7 @@ EROFS_FEATURE_FUNCS(fragments, incompat, INCOMPAT_FRAGMENTS) EROFS_FEATURE_FUNCS(dedupe, incompat, INCOMPAT_DEDUPE) EROFS_FEATURE_FUNCS(xattr_prefixes, incompat, INCOMPAT_XATTR_PREFIXES) EROFS_FEATURE_FUNCS(sb_chksum, compat, COMPAT_SB_CHKSUM) +EROFS_FEATURE_FUNCS (xattr_filter, compat,COMPAT_XATTR_FILTER ) /* atomic flag definitions */#define EROFS_I_EA_INITED_BIT 0
@@ -270,6 +271,7 @@ struct erofs_inode {unsigned char inode_isize;unsigned int xattr_isize; +unsigned long xattr_name_filter;unsigned int xattr_shared_count;unsigned int *xattr_shared_xattrs;
fs/erofs/xattr.c +12 -0
@@ -5,6 +5,7 @@* Copyright (C) 2021-2022, Alibaba Cloud */ #include <linux/security.h> +#include <linux/xxhash.h> #include "xattr.h" struct erofs_xattr_iter {
@@ -87,6 +88,7 @@ static int erofs_init_inode_xattrs(struct inode *inode) } ih = it.kaddr +erofs_blkoff (sb, it.pos); + vi->xattr_name_filter =le32_to_cpu (ih->h_name_filter); vi->xattr_shared_count = ih->h_shared_count; vi->xattr_shared_xattrs =kmalloc_array (vi->xattr_shared_count,sizeof (uint),GFP_KERNEL );
@@ -392,7 +394,10 @@ int erofs_getxattr(struct inode *inode, int index, const char *name, void *buffer, size_t buffer_size) { int ret; +uint32_t bit;struct erofs_xattr_iter it; +struct erofs_inode *vi =EROFS_I (inode); +struct erofs_sb_info *sbi =EROFS_SB (inode->i_sb);if (!name)return -EINVAL ;
@@ -401,6 +406,13 @@ int erofs_getxattr(struct inode *inode, int index, const char *name,if (ret)return ret; +if (erofs_sb_has_xattr_filter (sbi)) { + bit =xxh32 (name,strlen (name),EROFS_XATTR_FILTER_SEED + index); + bit &=EROFS_XATTR_FILTER_MASK ; +if (test_bit (bit, &vi->xattr_name_filter)) +return -ENOATTR ; + } + it.index = index; it.name = (struct qstr )QSTR_INIT (name,strlen (name));if (it.name.len >EROFS_NAME_LEN )
Signature · 1 line
2.19.1.6.gb485710b
Re: [PATCH v2 2/2] erofs: boost negative xattr lookup with bloom filter
Quoted 63 lines · Jingbo Xu
The bit value for the bloom filter map has a reverse semantics for compatibility. That is, the bit value of 0 indicates existence, while the bit value of 1 indicates the absence of corresponding xattr.
Signed-off-by Jingbo Xu <[email protected]>--- fs/erofs/internal.h | 2 ++ fs/erofs/xattr.c | 12 ++++++++++++ 2 files changed, 14 insertions(+)fs/erofs/internal.h +2
-0@@ -251,6 +251,7 @@ EROFS_FEATURE_FUNCS(fragments, incompat, INCOMPAT_FRAGMENTS) EROFS_FEATURE_FUNCS(dedupe, incompat, INCOMPAT_DEDUPE) EROFS_FEATURE_FUNCS(xattr_prefixes, incompat, INCOMPAT_XATTR_PREFIXES) EROFS_FEATURE_FUNCS(sb_chksum, compat, COMPAT_SB_CHKSUM) +EROFS_FEATURE_FUNCS (xattr_filter, compat,COMPAT_XATTR_FILTER ) /* atomic flag definitions */#define EROFS_I_EA_INITED_BIT 0@@ -270,6 +271,7 @@ struct erofs_inode {unsigned char inode_isize;unsigned int xattr_isize; +unsigned long xattr_name_filter;unsigned int xattr_shared_count;unsigned int *xattr_shared_xattrs;fs/erofs/xattr.c +5
-0@@ -5,6 +5,7 @@* Copyright (C) 2021-2022, Alibaba Cloud */ #include <linux/security.h> +#include <linux/xxhash.h> #include "xattr.h" struct erofs_xattr_iter {@@ -87,6 +88,7 @@ static int erofs_init_inode_xattrs(struct inode *inode) } ih = it.kaddr +erofs_blkoff (sb, it.pos); + vi->xattr_name_filter =le32_to_cpu (ih->h_name_filter); vi->xattr_shared_count = ih->h_shared_count; vi->xattr_shared_xattrs =kmalloc_array (vi->xattr_shared_count,sizeof (uint),GFP_KERNEL );@@ -392,7 +394,10 @@ int erofs_getxattr(struct inode *inode, int index, const char *name, void *buffer, size_t buffer_size) { int ret; +uint32_t bit;struct erofs_xattr_iter it; +struct erofs_inode *vi =EROFS_I (inode); +struct erofs_sb_info *sbi =EROFS_SB (inode->i_sb);if (!name)return -EINVAL ;
fs/erofs/xattr.c int erofs_getxattr(struct inode *inode, int index, const char *name, · line 409
Quoted 4 lines
fs/erofs/xattr.c +1
-0@@ -401,6 +406,13 @@ int erofs_getxattr(struct inode *inode, int index, const char *name,if (ret)return ret; +if (erofs_sb_has_xattr_filter (sbi)) {
As I said in my other mail. I would really like this to just always do the filter check. It should be safe as older fs:es have zero in place here, and doing this allows me to create composefs images with the bloom filters that also work with older kernels.
Quoted 12 lines
fs/erofs/xattr.c +6
-1+ bit =xxh32 (name,strlen (name),EROFS_XATTR_FILTER_SEED + index); + bit &=EROFS_XATTR_FILTER_MASK ; +if (test_bit (bit, &vi->xattr_name_filter)) +return -ENOATTR ; + } + it.index = index; it.name = (struct qstr )QSTR_INIT (name,strlen (name));if (it.name.len >EROFS_NAME_LEN ) --2.19.1.6.gb485710b
Signature · 3 lines
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Alexander Larsson Red Hat, Inc
[email protected] [email protected]Re: [PATCH v2 2/2] erofs: boost negative xattr lookup with bloom filter
Quoted 1 line · Alexander Larsson
On Wed, Jul 5, 2023 at 9:04 AM Jingbo Xu <[email protected]> wrote:
...
Quoted 6 lines
Quoted 1 line
+ if (
erofs_sb_has_xattr_filter(sbi)) {As I said in my other mail. I would really like this to just always do the filter check. It should be safe as older fs:es have zero in place here, and doing this allows me to create composefs images with the bloom filters that also work with older kernels.
As my previous email, this flag is on-disk compatible which means old unsupported kernels will just ignore this and go on mounting.
But this flag indicates a new on-disk feature in the image anyway, users could know if an image uses the new feature rather than seek to individual inodes.
Does it sound reasonable or some other consideration?
Thanks,
Gao Xiang