PCI: pciehp: Do not disable interrupt twice on suspend
PATCH 1/2 PCI: pciehp: Do not disable interrupt twice on suspend
We try to keep PCIe hotplug ports runtime suspended when entering system suspend. Due to the fact that the PCIe portdrv sets NEVER_SKIP driver PM flag the PM core always calls system suspend/resume hooks even if the device is left runtime suspended. Since PCIe hotplug driver re-uses the same function for both it ends up disabling hotplug interrupt twice and the second time following is printed:
pciehp 0000:03:01.0:pcie204: pcie_do_write_cmd: no response from device
Prevent this from happening by checking whether the device is already runtime suspended when system suspend hook is called.
--- drivers/pci/hotplug/pciehp_core.c | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-)
drivers/pci/hotplug/pciehp_core.c +23 -2
@@ -248,7 +248,7 @@ static bool pme_is_native(struct pcie_device *dev)return pcie_ports_native || host->native_pme; } -static int pciehp_suspend (struct pcie_device *dev) +static void pciehp_disable_interrupt (struct pcie_device *dev) {/* * Disable hotplug interrupt so that it does not trigger
@@ -256,7 +256,19 @@ static int pciehp_suspend(struct pcie_device *dev)*/ if (pme_is_native (dev))pcie_disable_interrupt (get_service_data (dev)); +} +#ifdef CONFIG_PM_SLEEP +static int pciehp_suspend (struct pcie_device *dev) +{ +/* +* If the port is already runtime suspended we can keep it that +* way. +*/ +if (dev_pm_smart_suspend_and_suspended (&dev->port->dev)) +return 0 ; + +pciehp_disable_interrupt (dev);return 0 ; }
@@ -274,6 +286,7 @@ static int pciehp_resume_noirq(struct pcie_device *dev) return 0; } +#endif static int pciehp_resume (struct pcie_device *dev) {
@@ -287,6 +300,12 @@ static int pciehp_resume(struct pcie_device *dev)return 0 ; } +static int pciehp_runtime_suspend (struct pcie_device *dev) +{ +pciehp_disable_interrupt (dev); +return 0 ; +} +static int pciehp_runtime_resume (struct pcie_device *dev) {struct controller *ctrl =get_service_data (dev);
@@ -313,10 +332,12 @@ static struct pcie_port_service_driver hpdriver_portdrv = { .remove = pciehp_remove,#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP .suspend = pciehp_suspend, .resume_noirq = pciehp_resume_noirq, +#endif .resume = pciehp_resume, - .runtime_suspend = pciehp_suspend, + .runtime_suspend = pciehp_runtime_suspend, .runtime_resume = pciehp_runtime_resume, #endif /* PM */ };
Signature · 1 line
2.20.1
PATCH 2/2 PCI: pciehp: Prevent deadlock on disconnect
If there are more than one PCIe switch with hotplug downstream ports hot-removing them leads to a following deadlock:
INFO: task irq/126-pciehp:198 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. irq/126-pciehp D 0 198 2 0x80000000 Call Trace: __schedule+0x2a2/0x880 schedule+0x2c/0x80 schedule_timeout+0x246/0x350 ? ttwu_do_activate+0x67/0x90 wait_for_completion+0xb7/0x140 ? wake_up_q+0x80/0x80 kthread_stop+0x49/0x110 __free_irq+0x15c/0x2a0 free_irq+0x32/0x70 pcie_shutdown_notification+0x2f/0x50 pciehp_remove+0x27/0x50 pcie_port_remove_service+0x36/0x50 device_release_driver_internal+0x18c/0x250 device_release_driver+0x12/0x20 bus_remove_device+0xec/0x160 device_del+0x13b/0x350 ? pcie_port_find_device+0x60/0x60 device_unregister+0x1a/0x60 remove_iter+0x1e/0x30 device_for_each_child+0x56/0x90 pcie_port_device_remove+0x22/0x40 pcie_portdrv_remove+0x20/0x60 pci_device_remove+0x3e/0xc0 device_release_driver_internal+0x18c/0x250 device_release_driver+0x12/0x20 pci_stop_bus_device+0x6f/0x90 pci_stop_bus_device+0x31/0x90 pci_stop_and_remove_bus_device+0x12/0x20 pciehp_unconfigure_device+0x88/0x140 pciehp_disable_slot+0x6a/0x110 pciehp_handle_presence_or_link_change+0x263/0x400 pciehp_ist+0x1c9/0x1d0 ? irq_forced_thread_fn+0x80/0x80 irq_thread_fn+0x24/0x60 irq_thread+0xeb/0x190 ? irq_thread_fn+0x60/0x60 kthread+0x120/0x140 ? irq_thread_check_affinity+0xf0/0xf0 ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 INFO: task irq/190-pciehp:2288 blocked for more than 120 seconds. irq/190-pciehp D 0 2288 2 0x80000000 Call Trace: __schedule+0x2a2/0x880 schedule+0x2c/0x80 schedule_preempt_disabled+0xe/0x10 __mutex_lock.isra.9+0x2e0/0x4d0 ? __mutex_lock_slowpath+0x13/0x20 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x2c/0x30 pci_lock_rescan_remove+0x15/0x20 pciehp_unconfigure_device+0x4d/0x140 pciehp_disable_slot+0x6a/0x110 pciehp_handle_presence_or_link_change+0x263/0x400 pciehp_ist+0x1c9/0x1d0 ? irq_forced_thread_fn+0x80/0x80 irq_thread_fn+0x24/0x60 irq_thread+0xeb/0x190 ? irq_thread_fn+0x60/0x60 kthread+0x120/0x140 ? irq_thread_check_affinity+0xf0/0xf0 ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40
What happens here is that the whole hierarchy is runtime resumed and the parent PCIe downstream port, who got the hot-remove event, starts removing devices below it taking pci_lock_rescan_remove() lock. When the child PCIe port is runtime resumed it calls pciehp_check_presence() which ends up calling pciehp_card_present() and pciehp_check_link_active(). Both of these read their parts of PCIe config space by calling helper function pcie_capability_read_word(). Now, this function notices that the underlying device is already gone and returns PCIBIOS_DEVICE_NOT_FOUND with the capability value set to 0. When pciehp gets this value it thinks that its child device is also hot-removed and schedules its IRQ thread to handle the event.
The deadlock happens when the child's IRQ thread runs and tries to acquire pci_lock_rescan_remove() which is already taken by the parent and the parent waits for the child's IRQ thread to finish.
We can prevent this from happening by checking the return value of pcie_capability_read_word() and if it is PCIBIOS_DEVICE_NOT_FOUND stop performing any hot-removal activities.
---
Hi,
This is really annoying issue and triggers 100% if you have more than one Thunderbolt device connected in a daisy chain (each of them include PCIe switch with hotplug downstream ports). Previously there has been discussion around the issue but so it remains unfixed. Since more and more systems out there are relying on native PCIe hotplug, I think we need to do something about it so here's my attempt :)
drivers/pci/hotplug/pciehp.h | 6 +++--- drivers/pci/hotplug/pciehp_core.c | 11 ++++++++--- drivers/pci/hotplug/pciehp_ctrl.c | 4 ++-- drivers/pci/hotplug/pciehp_hpc.c | 32 +++++++++++++++++++++++-------- 4 files changed, 37 insertions(+), 16 deletions(-)
drivers/pci/hotplug/pciehp.h +3 -3
@@ -173,10 +173,10 @@ int pciehp_query_power_fault(struct controller *ctrl);void pciehp_green_led_on (struct controller *ctrl);void pciehp_green_led_off (struct controller *ctrl);void pciehp_green_led_blink (struct controller *ctrl); -bool pciehp_card_present (struct controller *ctrl); -bool pciehp_card_present_or_link_active (struct controller *ctrl); +int pciehp_card_present (struct controller *ctrl); +int pciehp_card_present_or_link_active (struct controller *ctrl);int pciehp_check_link_status (struct controller *ctrl); -bool pciehp_check_link_active (struct controller *ctrl); +int pciehp_check_link_active (struct controller *ctrl);void pciehp_release_ctrl (struct controller *ctrl);int pciehp_sysfs_enable_slot (struct hotplug_slot *hotplug_slot);
drivers/pci/hotplug/pciehp_core.c +8 -3
@@ -134,10 +134,15 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) {struct controller *ctrl =to_ctrl (hotplug_slot);struct pci_dev *pdev = ctrl->pcie->port; +int ret;pci_config_pm_runtime_get (pdev); - *value =pciehp_card_present_or_link_active (ctrl); + ret =pciehp_card_present_or_link_active (ctrl);pci_config_pm_runtime_put (pdev); +if (ret <0 ) +return ret; + + *value = ret;return 0 ; }
@@ -153,13 +158,13 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)*/ static void pciehp_check_presence (struct controller *ctrl) { -bool occupied; +int occupied;down_read (&ctrl->reset_lock);mutex_lock (&ctrl->state_lock); occupied =pciehp_card_present_or_link_active (ctrl); -if ((occupied && (ctrl->state ==OFF_STATE || +if ((occupied >0 && (ctrl->state ==OFF_STATE || ctrl->state ==BLINKINGON_STATE )) || (!occupied && (ctrl->state ==ON_STATE || ctrl->state ==BLINKINGOFF_STATE )))
drivers/pci/hotplug/pciehp_ctrl.c +2 -2
@@ -221,7 +221,7 @@ void pciehp_handle_disable_request(struct controller *ctrl)void pciehp_handle_presence_or_link_change (struct controller *ctrl,u32 events) { -bool present, link_active; +int present, link_active;/* * If the slot is on and presence or link has changed, turn it off.
@@ -252,7 +252,7 @@ void pciehp_handle_presence_or_link_change(struct controller *ctrl, u32 events)mutex_lock (&ctrl->state_lock); present =pciehp_card_present (ctrl); link_active =pciehp_check_link_active (ctrl); -if (!present && !link_active) { +if (present <=0 && link_active <=0 ) {mutex_unlock (&ctrl->state_lock);return ; }
drivers/pci/hotplug/pciehp_hpc.c +24 -8
@@ -201,13 +201,16 @@ static void pcie_write_cmd_nowait(struct controller *ctrl, u16 cmd, u16 mask)pcie_do_write_cmd (ctrl, cmd, mask, false); } -bool pciehp_check_link_active (struct controller *ctrl) +int pciehp_check_link_active (struct controller *ctrl) {struct pci_dev *pdev =ctrl_dev (ctrl);u16 lnk_status; -bool ret; +int ret; + + ret =pcie_capability_read_word (pdev,PCI_EXP_LNKSTA , &lnk_status); +if (ret ==PCIBIOS_DEVICE_NOT_FOUND ) +return -ENODEV ; -pcie_capability_read_word (pdev,PCI_EXP_LNKSTA , &lnk_status); ret = !!(lnk_status &PCI_EXP_LNKSTA_DLLLA );if (ret)
@@ -373,13 +376,17 @@ void pciehp_get_latch_status(struct controller *ctrl, u8 *status) *status = !!(slot_status &PCI_EXP_SLTSTA_MRLSS ); } -bool pciehp_card_present (struct controller *ctrl) +int pciehp_card_present (struct controller *ctrl) {struct pci_dev *pdev =ctrl_dev (ctrl);u16 slot_status; +int ret; -pcie_capability_read_word (pdev,PCI_EXP_SLTSTA , &slot_status); -return slot_status &PCI_EXP_SLTSTA_PDS ; + ret =pcie_capability_read_word (pdev,PCI_EXP_SLTSTA , &slot_status); +if (ret ==PCIBIOS_DEVICE_NOT_FOUND ) +return -ENODEV ; + +return !!(slot_status &PCI_EXP_SLTSTA_PDS ); }/**
@@ -390,10 +397,19 @@ bool pciehp_card_present(struct controller *ctrl)* Presence Detect State bit, this helper also returns true if the Link Active * bit is set. This is a concession to broken hotplug ports which hardwire * Presence Detect State to zero, such as Wilocity's [1ae9:0200]. +* +* Returns: %1 if the slot is occupied and %0 if it is not. If the hotplug +* port is not present anymore returns %-ENODEV. */ -bool pciehp_card_present_or_link_active (struct controller *ctrl) +int pciehp_card_present_or_link_active (struct controller *ctrl) { -return pciehp_card_present (ctrl) ||pciehp_check_link_active (ctrl); +int ret; + + ret =pciehp_card_present (ctrl); +if (ret) +return ret; + +return pciehp_check_link_active (ctrl); }int pciehp_query_power_fault (struct controller *ctrl)
Signature · 1 line
2.20.1
Re: [PATCH 2/2] PCI: pciehp: Prevent deadlock on disconnect
Quoted 2 lines · Mika Westerberg
If there are more than one PCIe switch with hotplug downstream ports hot-removing them leads to a following deadlock:
[...]
Quoted 12 lines
What happens here is that the whole hierarchy is runtime resumed and the parent PCIe downstream port, who got the hot-remove event, starts removing devices below it taking
pci_lock_rescan_remove()lock. When the child PCIe port is runtime resumed it callspciehp_check_presence()which ends up callingpciehp_card_present()andpciehp_check_link_active(). Both of these read their parts of PCIe config space by calling helper functionpcie_capability_read_word(). Now, this function notices that the underlying device is already gone and returnsPCIBIOS_DEVICE_NOT_FOUNDwith the capability value set to 0. When pciehp gets this value it thinks that its child device is also hot-removed and schedules its IRQ thread to handle the event.
Quoted 7 lines
The deadlock happens when the child's IRQ thread runs and tries to acquire
pci_lock_rescan_remove()which is already taken by the parent and the parent waits for the child's IRQ thread to finish.We can prevent this from happening by checking the return value of
pcie_capability_read_word()and if it isPCIBIOS_DEVICE_NOT_FOUNDstop performing any hot-removal activities.
IIUC this patch only avoids the deadlock if the child hotplug port happens to be runtime suspended when it is surprise removed. The deadlock isn't avoided if is runtime resumed.
This patch I posted last year should cover both cases:
https://patchwork.kernel.org/patch/10468065/
However, as I've noted in this follow-up to the patch, I don't consider my solution a proper fix either:
https://patchwork.kernel.org/patch/10468065/#22206721
Rather, the problem should be addressed by unbinding PCI drivers without holding pci_lock_rescan_remove().
I'm truly sorry but I haven't been able to make much progress on this as I got caught up with other things. Part of the problem is that this is volunteer work. Maybe someone's interested in hiring me to work on it? Resume available on request. (But I'll get to it sooner or later whether paid or not, unless someone else beats me to it. :-) )
Thanks,
Lukas
Re: [PATCH 2/2] PCI: pciehp: Prevent deadlock on disconnect
Quoted 37 lines · Lukas Wunner
Quoted 2 lines · Mika Westerberg
If there are more than one PCIe switch with hotplug downstream ports hot-removing them leads to a following deadlock:
[...]
Quoted 12 lines
What happens here is that the whole hierarchy is runtime resumed and the parent PCIe downstream port, who got the hot-remove event, starts removing devices below it taking
pci_lock_rescan_remove()lock. When the child PCIe port is runtime resumed it callspciehp_check_presence()which ends up callingpciehp_card_present()andpciehp_check_link_active(). Both of these read their parts of PCIe config space by calling helper functionpcie_capability_read_word(). Now, this function notices that the underlying device is already gone and returnsPCIBIOS_DEVICE_NOT_FOUNDwith the capability value set to 0. When pciehp gets this value it thinks that its child device is also hot-removed and schedules its IRQ thread to handle the event.Quoted 7 lines
The deadlock happens when the child's IRQ thread runs and tries to acquire
pci_lock_rescan_remove()which is already taken by the parent and the parent waits for the child's IRQ thread to finish.We can prevent this from happening by checking the return value of
pcie_capability_read_word()and if it isPCIBIOS_DEVICE_NOT_FOUNDstop performing any hot-removal activities.IIUC this patch only avoids the deadlock if the child hotplug port happens to be runtime suspended when it is surprise removed. The deadlock isn't avoided if is runtime resumed.
This patch I posted last year should cover both cases:
https://patchwork.kernel.org/patch/10468065/
However, as I've noted in this follow-up to the patch, I don't consider my solution a proper fix either:
Quoted 8 lines
Rather, the problem should be addressed by unbinding PCI drivers without holding
pci_lock_rescan_remove().I'm truly sorry but I haven't been able to make much progress on this as I got caught up with other things. Part of the problem is that this is volunteer work. Maybe someone's interested in hiring me to work on it? Resume available on request. (But I'll get to it sooner or later whether paid or not, unless someone else beats me to it. :-) )
In any case we should do something about this sooner rather than later as this is really annoying issue and starts to affect more and more people.
This patch avoids touching the hardware as soon as we detect it is gone already preventing the issue so I think it is the right thing to do regardless. Having "perfect" fix sounds good but in the meantime I think we should have a fix that at least prevents the most common case from happening which here means unplugging 2 or more devices.
Up to Bjorn of course :)
Quoted 7 lines · Mika Westerberg
We try to keep PCIe hotplug ports runtime suspended when entering system suspend. Due to the fact that the PCIe portdrv sets
NEVER_SKIPdriver PM flag the PM core always calls system suspend/resume hooks even if the device is left runtime suspended. Since PCIe hotplug driver re-uses the same function for both it ends up disabling hotplug interrupt twice and the second time following is printed:
Quoted 8 lines
pciehp 0000:03:01.0:pcie204:
pcie_do_write_cmd: no response from devicePrevent this from happening by checking whether the device is already runtime suspended when system suspend hook is called.
Fixes 9c62f0bfb832 ("PCI: pciehp: Implement runtime PM callbacks")Reported-by Kai Heng Feng <[email protected]>Signed-off-by Mika Westerberg <[email protected]>
Quoted 75 lines
--- drivers/pci/hotplug/pciehp_core.c | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-)drivers/pci/hotplug/pciehp_core.c +23
-2@@ -248,7 +248,7 @@ static bool pme_is_native(struct pcie_device *dev)return pcie_ports_native || host->native_pme; } -static int pciehp_suspend (struct pcie_device *dev) +static void pciehp_disable_interrupt (struct pcie_device *dev) {/* * Disable hotplug interrupt so that it does not trigger @@ -256,7 +256,19 @@ static int pciehp_suspend(struct pcie_device *dev)*/ if (pme_is_native (dev))pcie_disable_interrupt (get_service_data (dev)); +} +#ifdef CONFIG_PM_SLEEP +static int pciehp_suspend (struct pcie_device *dev) +{ +/* +* If the port is already runtime suspended we can keep it that +* way. +*/ +if (dev_pm_smart_suspend_and_suspended (&dev->port->dev)) +return 0 ; + +pciehp_disable_interrupt (dev);return 0 ; }@@ -274,6 +286,7 @@ static int pciehp_resume_noirq(struct pcie_device *dev) return 0; } +#endif static int pciehp_resume (struct pcie_device *dev) {@@ -287,6 +300,12 @@ static int pciehp_resume(struct pcie_device *dev)return 0 ; } +static int pciehp_runtime_suspend (struct pcie_device *dev) +{ +pciehp_disable_interrupt (dev); +return 0 ; +} +static int pciehp_runtime_resume (struct pcie_device *dev) {struct controller *ctrl =get_service_data (dev);@@ -313,10 +332,12 @@ static struct pcie_port_service_driver hpdriver_portdrv = { .remove = pciehp_remove, #ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP .suspend = pciehp_suspend, .resume_noirq = pciehp_resume_noirq, +#endif .resume = pciehp_resume, - .runtime_suspend = pciehp_suspend, + .runtime_suspend = pciehp_runtime_suspend, .runtime_resume = pciehp_runtime_resume, #endif /* PM */};
Signature · 1 line
2.20.1
Quoted 7 lines · CEST Mika Westerberg
We try to keep PCIe hotplug ports runtime suspended when entering system suspend. Due to the fact that the PCIe portdrv sets
NEVER_SKIPdriver PM flag the PM core always calls system suspend/resume hooks even if the device is left runtime suspended. Since PCIe hotplug driver re-uses the same function for both it ends up disabling hotplug interrupt twice and the second time following is printed:
Quoted 8 lines
pciehp 0000:03:01.0:pcie204:
pcie_do_write_cmd: no response from devicePrevent this from happening by checking whether the device is already runtime suspended when system suspend hook is called.
Fixes 9c62f0bfb832 ("PCI: pciehp: Implement runtime PM callbacks")Reported-by Kai Heng Feng <[email protected]>Signed-off-by Mika Westerberg <[email protected]>
Quoted 73 lines
--- drivers/pci/hotplug/pciehp_core.c | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-)drivers/pci/hotplug/pciehp_core.c +23
-2@@ -248,7 +248,7 @@ static bool pme_is_native(struct pcie_device *dev)return pcie_ports_native || host->native_pme; } -static int pciehp_suspend (struct pcie_device *dev) +static void pciehp_disable_interrupt (struct pcie_device *dev) {/* * Disable hotplug interrupt so that it does not trigger @@ -256,7 +256,19 @@ static int pciehp_suspend(struct pcie_device *dev)*/ if (pme_is_native (dev))pcie_disable_interrupt (get_service_data (dev)); +} +#ifdef CONFIG_PM_SLEEP +static int pciehp_suspend (struct pcie_device *dev) +{ +/* +* If the port is already runtime suspended we can keep it that +* way. +*/ +if (dev_pm_smart_suspend_and_suspended (&dev->port->dev)) +return 0 ; + +pciehp_disable_interrupt (dev);return 0 ; }@@ -274,6 +286,7 @@ static int pciehp_resume_noirq(struct pcie_device *dev) return 0; } +#endif static int pciehp_resume (struct pcie_device *dev) {@@ -287,6 +300,12 @@ static int pciehp_resume(struct pcie_device *dev)return 0 ; } +static int pciehp_runtime_suspend (struct pcie_device *dev) +{ +pciehp_disable_interrupt (dev); +return 0 ; +} +static int pciehp_runtime_resume (struct pcie_device *dev) {struct controller *ctrl =get_service_data (dev);@@ -313,10 +332,12 @@ static struct pcie_port_service_driver hpdriver_portdrv = { .remove = pciehp_remove,#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP .suspend = pciehp_suspend, .resume_noirq = pciehp_resume_noirq, +#endif .resume = pciehp_resume, - .runtime_suspend = pciehp_suspend, + .runtime_suspend = pciehp_runtime_suspend, .runtime_resume = pciehp_runtime_resume, #endif /* PM */ };
Quoted 4 lines · Mika Westerberg
drivers/pci/hotplug/pciehp_core.c +0
-0@@ -313,10 +332,12 @@ static struct pcie_port_service_driver hpdriver_portdrv = { .remove = pciehp_remove,#ifdef CONFIG_PM
drivers/pci/hotplug/pciehp_core.c static struct pcie_port_service_driver hpdriver_portdrv = { · line 343
Quoted 10 lines
drivers/pci/hotplug/pciehp_core.c +3
-1+#ifdef CONFIG_PM_SLEEP .suspend = pciehp_suspend, .resume_noirq = pciehp_resume_noirq, +#endif .resume = pciehp_resume, - .runtime_suspend = pciehp_suspend, + .runtime_suspend = pciehp_runtime_suspend, .runtime_resume = pciehp_runtime_resume, #endif /* PM */ };
Hm, why isn't ".resume" part of the "#ifdef CONFIG_PM_SLEEP" section?
Otherwise LGTM.
Thanks,
Lukas
Quoted 4 lines · Lukas Wunner
Quoted 3 lines · Mika Westerberg
drivers/pci/hotplug/pciehp_core.c +0
-0@@ -313,10 +332,12 @@ static struct pcie_port_service_driver hpdriver_portdrv = { .remove = pciehp_remove,
Quoted 13 lines
drivers/pci/hotplug/pciehp_core.c static struct pcie_port_service_driver hpdriver_portdrv = { · line 343
Quoted 11 lines
drivers/pci/hotplug/pciehp_core.c +3
-1#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP .suspend = pciehp_suspend, .resume_noirq = pciehp_resume_noirq, +#endif .resume = pciehp_resume, - .runtime_suspend = pciehp_suspend, + .runtime_suspend = pciehp_runtime_suspend, .runtime_resume = pciehp_runtime_resume, #endif /* PM */ };Hm, why isn't ".resume" part of the "#ifdef
CONFIG_PM_SLEEP" section?
Good point. I'll move it there.