hwmon: (pmbus/max34440): add support adpm12250
Subsystems (2)
PATCH 1/1 hwmon: (pmbus/max34440): add support adpm12250
ADPM12250 is a quarter brick DC/DC Power Module. It is a high power non-isolated converter capable of delivering regulated 12V with continuous power level of 2500W. Uses PMBus.
---
ADPM12250 is a quarter brick DC/DC Power Module. It is a high power non-isolated converter capable of delivering regulated 12V with continuous power level of 2500W. Uses PMBus.
--- Documentation/hwmon/max34440.rst | 27 ++++++++++++++++-------- drivers/hwmon/pmbus/max34440.c | 45 +++++++++++++++++++++++++++++++++++++--- 2 files changed, 60 insertions(+), 12 deletions(-)
Documentation/hwmon/max34440.rst +18 -9
@@ -19,6 +19,14 @@ Supported chips: Datasheet: - + * ADI ADPM12250 + + Prefixes: 'adpm12250' + + Addresses scanned: - + + Datasheet: - + * Maxim MAX34440 Prefixes: 'max34440'
@@ -87,11 +95,11 @@ This driver supports multiple devices: hardware monitoring for Maxim MAX34440 PMBus 6-Channel Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger; PMBus Voltage Monitor and Sequencers for MAX34451, MAX34460, and -MAX34461; PMBus DC/DC Power Module ADPM12160, and ADPM12200. The MAX34451 -supports monitoring voltage or current of 12 channels based on GIN pins. The -MAX34460 supports 12 voltage channels, and the MAX34461 supports 16 voltage -channels. The ADPM12160, and ADPM12200 also monitors both input and output -of voltage and current. +MAX34461; PMBus DC/DC Power Module ADPM12160, ADPM12200, and ADPM12250. The +MAX34451 supports monitoring voltage or current of 12 channels based on GIN +pins. The MAX34460 supports 12 voltage channels, and the MAX34461 supports 16 +voltage channels. The ADPM12160, ADPM12200, and ADPM12250 also monitors both +input and output of voltage and current. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
@@ -149,7 +157,7 @@ in[1-6]_reset_history Write any value to reset history. .. note:: - MAX34446 only supports in[1-4]. - - ADPM12160, and ADPM12200 only supports in[1-2]. Label is "vin1" + - ADPM12160, ADPM12200, and ADPM12250 only supports in[1-2]. Label is "vin1" and "vout1" respectively. Curr
@@ -172,8 +180,9 @@ curr[1-6]_reset_history Write any value to reset history. - in6 and curr6 attributes only exist for MAX34440. - MAX34446 only supports curr[1-4]. - - For ADPM12160, and ADPM12200, curr[1] is "iin1" and curr[2-6] - are "iout[1-5]". + - For ADPM12160, ADPM12200, and ADPM12250, curr[1] is "iin1" + - For ADPM12160, and ADPM12200 curr[2-6] are "iout[1-5]". + - For ADPM12250, curr[2-4] are "iout[1-3]". Power ~~~~~
@@ -209,7 +218,7 @@ temp[1-8]_reset_history Write any value to reset history. .. note:: - temp7 and temp8 attributes only exist for MAX34440. - MAX34446 only supports temp[1-3]. - - ADPM12160, and ADPM12200 only supports temp[1]. + - ADPM12160, ADPM12200, and ADPM12250 only supports temp[1]. .. note::
drivers/hwmon/pmbus/max34440.c +42 -3
81 lines not on this page · raw message
---
base-commit: 1723bc01ecc7ca2f30272685121314379ba5eb18
change-id: 20260610-dev-adpm12250-4ce6fc8c82ac
Best regards,
Signature · 1 line
Alexis Czezar Torreno <[email protected]>
[email protected]
AI reviewSashiko has reviewed this patch and found no issues. It looks great!
Quoted 5 lines
ADPM12250 is a quarter brick DC/DC Power Module. It is a high power non-isolated converter capable of delivering regulated 12V with continuous power level of 2500W. Uses PMBus.
Signed-off-by Alexis Czezar Torreno <[email protected]>
Sashiko has reviewed this patch and found no issues. It looks great!
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
Quoted 10 lines · Alexis Czezar Torreno
ADPM12250 is a quarter brick DC/DC Power Module. It is a high power non-isolated converter capable of delivering regulated 12V with continuous power level of 2500W. Uses PMBus.
Signed-off-by Alexis Czezar Torreno <[email protected]>---
ADPM12250 is a quarter brick DC/DC Power Module. It is a high power non-isolated converter capable of delivering regulated 12V with continuous power level of 2500W. Uses PMBus.
---
Quoted 174 lines
Documentation/hwmon/max34440.rst | 27 ++++++++++++++++-------- drivers/hwmon/pmbus/max34440.c | 45 +++++++++++++++++++++++++++++++++++++---
2 files changed, 60 insertions(+), 12 deletions(-)Documentation/hwmon/max34440.rst +0
-0index
d6d4fbc863d96c1008a1971d3e3245d9ce1ef688..e7421f4dbf38fc1436bbaeba71d4461a00f8cefb100644Documentation/hwmon/max34440.rst +0
-0@@ -19,6 +19,14 @@ Supported chips:
Datasheet: -
+ * ADI ADPM12250Documentation/hwmon/max34440.rst +7
-0+ + Prefixes: 'adpm12250' + + Addresses scanned: - + + Datasheet: - +* Maxim MAX34440
Prefixes: 'max34440'Documentation/hwmon/max34440.rst +0
-0@@ -87,11 +95,11 @@ This driver supports multiple devices: hardware monitoring forMaxim MAX34440
PMBus 6-Channel Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger; PMBus Voltage Monitor and Sequencers for MAX34451, MAX34460, andDocumentation/hwmon/max34440.rst +5
-5-MAX34461; PMBus DC/DC Power Module ADPM12160, and ADPM12200. The MAX34451 -supports monitoring voltage or current of 12 channels based on GIN pins. The -MAX34460 supports 12 voltage channels, and the MAX34461 supports 16 voltage -channels. The ADPM12160, and ADPM12200 also monitors both input and output -of voltage and current. +MAX34461; PMBus DC/DC Power Module ADPM12160, ADPM12200, and ADPM12250. The +MAX34451 supports monitoring voltage or current of 12 channels based on GIN +pins. The MAX34460 supports 12 voltage channels, and the MAX34461 supports 16 +voltage channels. The ADPM12160, ADPM12200, and ADPM12250 also monitors both +input and output of voltage and current.
The driver is a client driver to the core PMBus driver. Please seeDocumentation/hwmon/pmbus.rstfor details on PMBus client drivers.Documentation/hwmon/max34440.rst +0
-0@@ -149,7 +157,7 @@ in[1-6]_reset_history Write any value to reset history... note::
- MAX34446 only supports in[1-4].
- - ADPM12160, and ADPM12200 only supports in[1-2]. Label is "vin1" + - ADPM12160, ADPM12200, and ADPM12250 only supports in[1-2]. Label is "vin1" and "vout1" respectively.
CurrDocumentation/hwmon/max34440.rst +0
-0@@ -172,8 +180,9 @@ curr[1-6]_reset_history Write any value to reset history.
- in6 and curr6 attributes only exist for MAX34440.
- MAX34446 only supports curr[1-4].
- - For ADPM12160, and ADPM12200, curr[1] is "iin1" and curr[2-6] - are "iout[1-5]".
+ - For ADPM12160, ADPM12200, and ADPM12250, curr[1] is "iin1" + - For ADPM12160, and ADPM12200 curr[2-6] are "iout[1-5]". + - For ADPM12250, curr[2-4] are "iout[1-3]".
Power
~~~~~Documentation/hwmon/max34440.rst +0
-0@@ -209,7 +218,7 @@ temp[1-8]_reset_history Write any value to reset history... note::
- temp7 and temp8 attributes only exist for MAX34440.
- MAX34446 only supports temp[1-3].
- - ADPM12160, and ADPM12200 only supports temp[1]. + - ADPM12160, ADPM12200, and ADPM12250 only supports temp[1].
.. note::drivers/hwmon/pmbus/max34440.c +0
-0index
4525b9fc56267479534251a1444aa09181615ac6..74876d2207fbe4014b8b54a9fd9682370fc3bbed100644drivers/hwmon/pmbus/max34440.c +1
-0@@ -18,6 +18,7 @@ enum chips { adpm12160, adpm12200, + adpm12250, max34440, max34441, max34446,@@ -97,7 +98,8 @@ static int max34440_read_word_data(struct i2c_client *client, int page, break;case
PMBUS_VIRT_READ_IOUT_AVG:
if (data->id!= max34446 &&data->id!= max34451 &&drivers/hwmon/pmbus/max34440.c +2
-1- data->id != adpm12160 && data->id != adpm12200) + data->id != adpm12160 && data->id != adpm12200 && + data->id != adpm12250)return
-ENXIO;
ret =pmbus_read_word_data(client, page, phase, MAX34446_MFR_IOUT_AVG);drivers/hwmon/pmbus/max34440.c +0
-0@@ -182,7 +184,8 @@ static int max34440_write_word_data(struct i2c_client *client,int page, ret = pmbus_write_word_data(client, page, MAX34440_MFR_IOUT_PEAK, 0);if (!ret && (
data->id== max34446 ||data->id== max34451 ||drivers/hwmon/pmbus/max34440.c +2
-1- data->id == adpm12160 || data->id == adpm12200)) + data->id == adpm12160 || data->id == adpm12200 || + data->id == adpm12250))ret =
pmbus_write_word_data(client, page, MAX34446_MFR_IOUT_AVG, 0);drivers/hwmon/pmbus/max34440.c +37
-2@@ -399,6 +402,40 @@ static struct pmbus_driver_info max34440_info[] = { .read_word_data = max34440_read_word_data, .write_word_data = max34440_write_word_data, }, + [adpm12250] = { + .pages = 19, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_CURRENT_IN] = direct, + .format[PSC_CURRENT_OUT] = direct, + .format[PSC_TEMPERATURE] = direct, + .m[PSC_VOLTAGE_IN] = 125, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = 0, + .m[PSC_VOLTAGE_OUT] = 125, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = 0, + .m[PSC_CURRENT_IN] = 250, + .b[PSC_CURRENT_IN] = 0, + .R[PSC_CURRENT_IN] = -1, + .m[PSC_CURRENT_OUT] = 250, + .b[PSC_CURRENT_OUT] = 0, + .R[PSC_CURRENT_OUT] = -1, + .m[PSC_TEMPERATURE] = 1, + .b[PSC_TEMPERATURE] = 0, + .R[PSC_TEMPERATURE] = 2, +/* absent func below [18] are not for monitoring */ + .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT, + .func[4] = PMBUS_HAVE_STATUS_IOUT, + .func[5] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[6] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[9] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT, + .func[10] = PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT, + .func[14] = PMBUS_HAVE_IOUT, + .func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .read_word_data = max34440_read_word_data, + .write_word_data = max34440_write_word_data, + }, [max34440] = { .pages = 14, .format[PSC_VOLTAGE_IN] = direct,@@ -635,7 +672,8 @@ static int max34440_probe(struct i2c_client *client) rv = max34451_set_supported_funcs(client, data); if (rv) return rv; - }else if (data->id == adpm12160 || data->id == adpm12200) { + }else if (data->id == adpm12160 || data->id == adpm12200 || + data->id == adpm12250) { data->iout_oc_fault_limit = PMBUS_IOUT_OC_FAULT_LIMIT; data->iout_oc_warn_limit = PMBUS_IOUT_OC_WARN_LIMIT; }@@ -646,6 +684,7 @@ static int max34440_probe(struct i2c_client *client) static const struct i2c_device_id max34440_id[] = { { .name = "adpm12160", .driver_data = adpm12160 }, { .name = "adpm12200", .driver_data = adpm12200 }, + { .name ="adpm12250" , .driver_data = adpm12250 }, { .name = "max34440", .driver_data = max34440 }, { .name = "max34441", .driver_data = max34441 }, { .name = "max34446", .driver_data = max34446 }, ---base-commit:
1723bc01ecc7ca2f30272685121314379ba5eb18
change-id: 20260610-dev-adpm12250-4ce6fc8c82acBest regards,
Quoted 6 lines · Alexis Czezar Torreno
ADPM12250 is a quarter brick DC/DC Power Module. It is a high power non-isolated converter capable of delivering regulated 12V with continuous power level of 2500W. Uses PMBus.
Signed-off-by Alexis Czezar Torreno <[email protected]>Reviewed-by Nuno Sá <[email protected]>
Applied.
Thanks,
Guenter