ABI: add it to the documentation build system
Subsystems (54)
PATCH v2 31/39 docs: ABI: cleanup several ABI documents
In reply to Mauro Carvalho ChehabThere are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result.
Address them, in order to provide a clean output.
--- Documentation/ABI/obsolete/sysfs-class-dax | 8 +- .../ABI/obsolete/sysfs-driver-hid-roccat-pyra | 3 + Documentation/ABI/removed/devfs | 1 + Documentation/ABI/removed/raw1394 | 1 + Documentation/ABI/removed/sysfs-class-rfkill | 2 +- Documentation/ABI/removed/video1394 | 1 + Documentation/ABI/stable/firewire-cdev | 63 ++--- Documentation/ABI/stable/sysfs-acpi-pmprofile | 4 +- Documentation/ABI/stable/sysfs-bus-w1 | 1 + Documentation/ABI/stable/sysfs-class-tpm | 4 +- Documentation/ABI/stable/sysfs-driver-speakup | 4 + Documentation/ABI/testing/configfs-most | 135 +++++++---- .../ABI/testing/configfs-usb-gadget-ecm | 12 +- .../ABI/testing/configfs-usb-gadget-eem | 10 +- .../ABI/testing/configfs-usb-gadget-loopback | 6 +- .../testing/configfs-usb-gadget-mass-storage | 18 +- .../ABI/testing/configfs-usb-gadget-midi | 14 +- .../ABI/testing/configfs-usb-gadget-printer | 6 +- .../testing/configfs-usb-gadget-sourcesink | 18 +- .../ABI/testing/configfs-usb-gadget-subset | 10 +- .../ABI/testing/configfs-usb-gadget-uac2 | 14 +- .../ABI/testing/configfs-usb-gadget-uvc | 2 +- .../ABI/testing/debugfs-cec-error-inj | 2 +- .../ABI/testing/debugfs-driver-habanalabs | 12 +- .../ABI/testing/debugfs-pfo-nx-crypto | 28 +-- Documentation/ABI/testing/debugfs-pktcdvd | 2 +- .../ABI/testing/debugfs-turris-mox-rwtm | 10 +- Documentation/ABI/testing/debugfs-wilco-ec | 21 +- Documentation/ABI/testing/dell-smbios-wmi | 32 +-- Documentation/ABI/testing/gpio-cdev | 13 +- Documentation/ABI/testing/procfs-diskstats | 6 +- Documentation/ABI/testing/procfs-smaps_rollup | 48 ++-- Documentation/ABI/testing/pstore | 19 +- Documentation/ABI/testing/sysfs-block-rnbd | 4 +- Documentation/ABI/testing/sysfs-bus-acpi | 1 + .../testing/sysfs-bus-coresight-devices-etb10 | 5 +- Documentation/ABI/testing/sysfs-bus-css | 3 + Documentation/ABI/testing/sysfs-bus-dfl | 2 + .../sysfs-bus-event_source-devices-hv_24x7 | 6 +- .../sysfs-bus-event_source-devices-hv_gpci | 7 +- Documentation/ABI/testing/sysfs-bus-fcoe | 68 ++++-- Documentation/ABI/testing/sysfs-bus-fsl-mc | 12 +- .../ABI/testing/sysfs-bus-i2c-devices-fsa9480 | 26 +- Documentation/ABI/testing/sysfs-bus-i3c | 2 + Documentation/ABI/testing/sysfs-bus-iio | 19 +- .../ABI/testing/sysfs-bus-iio-adc-hi8435 | 5 + .../ABI/testing/sysfs-bus-iio-adc-stm32 | 3 + .../ABI/testing/sysfs-bus-iio-distance-srf08 | 7 +- .../testing/sysfs-bus-iio-frequency-ad9523 | 2 + .../testing/sysfs-bus-iio-frequency-adf4371 | 10 +- .../ABI/testing/sysfs-bus-iio-health-afe440x | 12 +- .../ABI/testing/sysfs-bus-iio-light-isl29018 | 6 +- .../testing/sysfs-bus-intel_th-devices-gth | 11 +- Documentation/ABI/testing/sysfs-bus-papr-pmem | 23 +- Documentation/ABI/testing/sysfs-bus-pci | 22 +- .../ABI/testing/sysfs-bus-pci-devices-catpt | 1 + .../testing/sysfs-bus-pci-drivers-ehci_hcd | 4 +- Documentation/ABI/testing/sysfs-bus-rbd | 37 ++- Documentation/ABI/testing/sysfs-bus-siox | 3 + .../ABI/testing/sysfs-bus-thunderbolt | 18 +- Documentation/ABI/testing/sysfs-bus-usb | 2 + .../sysfs-class-backlight-driver-lm3533 | 26 +- Documentation/ABI/testing/sysfs-class-bdi | 1 - .../ABI/testing/sysfs-class-chromeos | 15 +- Documentation/ABI/testing/sysfs-class-cxl | 8 +- Documentation/ABI/testing/sysfs-class-devlink | 30 ++- Documentation/ABI/testing/sysfs-class-extcon | 34 +-- .../ABI/testing/sysfs-class-fpga-manager | 5 +- Documentation/ABI/testing/sysfs-class-gnss | 2 + Documentation/ABI/testing/sysfs-class-led | 1 + .../testing/sysfs-class-led-driver-el15203000 | 30 +-- .../ABI/testing/sysfs-class-led-driver-lm3533 | 44 ++-- .../ABI/testing/sysfs-class-led-flash | 27 ++- .../testing/sysfs-class-led-trigger-netdev | 7 + .../testing/sysfs-class-led-trigger-usbport | 1 + .../ABI/testing/sysfs-class-leds-gt683r | 8 +- Documentation/ABI/testing/sysfs-class-net | 61 +++-- .../ABI/testing/sysfs-class-net-cdc_ncm | 6 +- .../ABI/testing/sysfs-class-net-phydev | 2 + Documentation/ABI/testing/sysfs-class-pktcdvd | 36 +-- Documentation/ABI/testing/sysfs-class-power | 12 +- .../ABI/testing/sysfs-class-power-mp2629 | 1 + .../ABI/testing/sysfs-class-power-twl4030 | 4 +- Documentation/ABI/testing/sysfs-class-rapidio | 46 ++-- .../ABI/testing/sysfs-class-regulator | 36 +-- .../ABI/testing/sysfs-class-remoteproc | 14 +- ...ysfs-class-rtc-rtc0-device-rtc_calibration | 1 + Documentation/ABI/testing/sysfs-class-uwb_rc | 13 +- .../ABI/testing/sysfs-class-watchdog | 7 +- Documentation/ABI/testing/sysfs-dev | 7 +- .../ABI/testing/sysfs-devices-mapping | 41 ++-- .../ABI/testing/sysfs-devices-memory | 15 +- .../sysfs-devices-platform-_UDC_-gadget | 10 +- .../ABI/testing/sysfs-devices-platform-ipmi | 52 ++-- .../ABI/testing/sysfs-devices-system-cpu | 4 +- .../ABI/testing/sysfs-driver-hid-lenovo | 10 + .../ABI/testing/sysfs-driver-hid-ntrig | 13 +- .../ABI/testing/sysfs-driver-hid-roccat-kone | 19 ++ .../ABI/testing/sysfs-driver-hid-wiimote | 1 + .../ABI/testing/sysfs-driver-input-exc3000 | 2 + .../ABI/testing/sysfs-driver-jz4780-efuse | 6 +- .../ABI/testing/sysfs-driver-pciback | 6 +- Documentation/ABI/testing/sysfs-driver-ufs | 228 ++++++++++++++---- .../ABI/testing/sysfs-driver-w1_ds28e17 | 3 + Documentation/ABI/testing/sysfs-firmware-acpi | 16 +- .../ABI/testing/sysfs-firmware-efi-esrt | 28 ++- .../testing/sysfs-firmware-efi-runtime-map | 14 +- .../ABI/testing/sysfs-firmware-qemu_fw_cfg | 20 +- Documentation/ABI/testing/sysfs-firmware-sfi | 6 +- .../ABI/testing/sysfs-firmware-sgi_uv | 6 +- Documentation/ABI/testing/sysfs-fs-f2fs | 48 ++-- Documentation/ABI/testing/sysfs-kernel-mm-ksm | 5 +- Documentation/ABI/testing/sysfs-kernel-slab | 3 + Documentation/ABI/testing/sysfs-module | 17 +- .../ABI/testing/sysfs-platform-dell-laptop | 10 +- .../ABI/testing/sysfs-platform-dell-smbios | 4 +- .../testing/sysfs-platform-i2c-demux-pinctrl | 4 +- Documentation/ABI/testing/sysfs-platform-kim | 1 + .../testing/sysfs-platform-phy-rcar-gen3-usb2 | 10 +- .../ABI/testing/sysfs-platform-renesas_usb3 | 10 +- Documentation/ABI/testing/sysfs-power | 21 +- Documentation/ABI/testing/sysfs-profiling | 2 +- Documentation/ABI/testing/sysfs-wusb_cbaf | 3 +- Documentation/ABI/testing/usb-charger-uevent | 82 ++++--- Documentation/ABI/testing/usb-uevent | 32 +-- scripts/get_abi.pl | 2 - 126 files changed, 1323 insertions(+), 767 deletions(-)
Documentation/ABI/obsolete/sysfs-class-dax +4 -4
@@ -8,11 +8,11 @@ Description: Device DAX is the device-centric analogue of Filesystem system. Device DAX is strict, precise and predictable. Specifically this interface: - 1/ Guarantees fault granularity with respect to a given - page size (pte, pmd, or pud) set at configuration time. + 1. Guarantees fault granularity with respect to a given + page size (pte, pmd, or pud) set at configuration time. - 2/ Enforces deterministic behavior by being strict about - what fault scenarios are supported. + 2. Enforces deterministic behavior by being strict about + what fault scenarios are supported. The /sys/class/dax/ interface enumerates all the device-dax instances in the system. The ABI is
Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra +3 -0
@@ -7,10 +7,13 @@ Description: It is possible to switch the cpi setting of the mouse with the setting reported by the mouse. This number has to be further processed to receive the real dpi value: + ===== ==== VALUE DPI + ===== ==== 1 400 2 800 4 1600 + ===== ==== This file is readonly. Has never been used. If bookkeeping is done, it's done in userland tools.
Documentation/ABI/removed/devfs +1 -0
@@ -5,6 +5,7 @@ Description: devfs has been unmaintained for a number of years, has unfixable races, contains a naming policy within the kernel that is against the LSB, and can be replaced by using udev. + The files fs/devfs/*, include/linux/devfs_fs*.h were removed, along with the assorted devfs function calls throughout the kernel tree.
Documentation/ABI/removed/raw1394 +1 -0
@@ -7,6 +7,7 @@ Description: to implement sensible device security policies, and its low level of abstraction that required userspace clients to duplicate much of the kernel's ieee1394 core functionality. + Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of firewire-core.
Documentation/ABI/removed/sysfs-class-rfkill +1 -1
@@ -10,4 +10,4 @@ Description: This file was deprecated because there no longer was a way to claim just control over a single rfkill instance. This file was scheduled to be removed in 2012, and was removed in 2016. -Values: 0: Kernel handles events +Values: 0: Kernel handles events
Documentation/ABI/removed/video1394 +1 -0
@@ -8,6 +8,7 @@ Description: performance issues in its first generation. Any video1394 user had to use raw1394 + libraw1394 too because video1394 did not provide asynchronous I/O for device discovery and configuration. + Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of firewire-core.
Documentation/ABI/stable/firewire-cdev +33 -30
101 lines not on this page · raw message
Documentation/ABI/stable/sysfs-acpi-pmprofile +2 -2
@@ -1,8 +1,8 @@ -What: /sys/firmware/acpi/pm_profile +What: /sys/firmware/acpi/pm_profile Date: 03-Nov-2011 KernelVersion: v3.2 Contact: [email protected] -Description: The ACPI pm_profile sysfs interface exports the platform +Description: The ACPI pm_profile sysfs interface exports the platform power management (and performance) requirement expectations as provided by BIOS. The integer value is directly passed as retrieved from the FADT ACPI table.
Documentation/ABI/stable/sysfs-bus-w1 +1 -0
@@ -6,6 +6,7 @@ Description: Bus scanning interval, microseconds component. control systems are attached/generate presence for as short as 100 ms - hence the tens-to-hundreds milliseconds scan intervals are required. + see Documentation/w1/w1-generic.rst for detailed information. Users: any user space application which wants to know bus scanning interval
Documentation/ABI/stable/sysfs-class-tpm +2 -2
@@ -191,6 +191,6 @@ Contact: [email protected] Description: The "tpm_version_major" property shows the TCG spec major version implemented by the TPM device. - Example output: + Example output:: - 2 + 2
Documentation/ABI/stable/sysfs-driver-speakup +4 -0
@@ -69,6 +69,7 @@ Description: Controls if typing interrupts output from speakup. With speakup if for example the say screen command is used before the entire screen is read. + With no_interrupt set to one, if the say screen command is used, and one then types on the keyboard, speakup will continue to say the whole screen regardless until
@@ -215,8 +216,10 @@ Description: This file contains names for key states. Again, these are part of the help system. For instance, if you had pressed speakup + keypad 3, you would hear: "speakup keypad 3 is go to bottom edge." + The speakup key is depressed, so the name of the key state is speakup. + This part of the message comes from the states collection. What: /sys/accessibility/speakup/i18n/characters
@@ -297,6 +300,7 @@ KernelVersion: 2.6 Contact: [email protected] Description: Controls if punctuation is spoken by speakup, or by the synthesizer. + For example, speakup speaks ">" as "greater", while the espeak synthesizer used by the soft driver speaks "greater than". Zero lets speakup speak the punctuation. One lets the
Documentation/ABI/testing/configfs-most +90 -45
255 lines not on this page · raw message
Documentation/ABI/testing/configfs-usb-gadget-ecm +8 -4
@@ -4,13 +4,17 @@ KernelVersion: 3.11 Description: The attributes: - ifname - network device interface name associated with + ifname + - network device interface name associated with this function instance - qmult - queue length multiplier for high and + qmult + - queue length multiplier for high and super speed - host_addr - MAC address of host's end of this + host_addr + - MAC address of host's end of this Ethernet over USB link - dev_addr - MAC address of device's end of this + dev_addr + - MAC address of device's end of this Ethernet over USB link
Documentation/ABI/testing/configfs-usb-gadget-eem +6 -4
@@ -4,11 +4,13 @@ KernelVersion: 3.11 Description: The attributes: - ifname - network device interface name associated with + ========== ============================================= + ifname network device interface name associated with this function instance - qmult - queue length multiplier for high and + qmult queue length multiplier for high and super speed - host_addr - MAC address of host's end of this + host_addr MAC address of host's end of this Ethernet over USB link - dev_addr - MAC address of device's end of this + dev_addr MAC address of device's end of this Ethernet over USB link + ========== =============================================
Documentation/ABI/testing/configfs-usb-gadget-loopback +4 -2
@@ -4,5 +4,7 @@ KernelVersion: 3.13 Description: The attributes: - qlen - depth of loopback queue - buflen - buffer length + ======= ======================= + qlen depth of loopback queue + buflen buffer length + ======= =======================
Documentation/ABI/testing/configfs-usb-gadget-mass-storage +11 -7
@@ -4,12 +4,14 @@ KernelVersion: 3.13 Description: The attributes: - stall - Set to permit function to halt bulk endpoints. + =========== ============================================== + stall Set to permit function to halt bulk endpoints. Disabled on some USB devices known not to work correctly. You should set it to true. - num_buffers - Number of pipeline buffers. Valid numbers + num_buffers Number of pipeline buffers. Valid numbers are 2..4. Available only if CONFIG_USB_GADGET_DEBUG_FILES is set. + =========== ============================================== What: /config/usb-gadget/gadget/functions/mass_storage.name/lun.name Date: Oct 2013
@@ -17,15 +19,17 @@ KernelVersion: 3.13 Description: The attributes: - file - The path to the backing file for the LUN. + =========== ============================================== + file The path to the backing file for the LUN. Required if LUN is not marked as removable. - ro - Flag specifying access to the LUN shall be + ro Flag specifying access to the LUN shall be read-only. This is implied if CD-ROM emulation is enabled as well as when it was impossible to open "filename" in R/W mode. - removable - Flag specifying that LUN shall be indicated as + removable Flag specifying that LUN shall be indicated as being removable. - cdrom - Flag specifying that LUN shall be reported as + cdrom Flag specifying that LUN shall be reported as being a CD-ROM. - nofua - Flag specifying that FUA flag + nofua Flag specifying that FUA flag in SCSI WRITE(10,12) + =========== ==============================================
Documentation/ABI/testing/configfs-usb-gadget-midi +8 -6
@@ -4,9 +4,11 @@ KernelVersion: 3.19 Description: The attributes: - index - index value for the USB MIDI adapter - id - ID string for the USB MIDI adapter - buflen - MIDI buffer length - qlen - USB read request queue length - in_ports - number of MIDI input ports - out_ports - number of MIDI output ports + ========== ==================================== + index index value for the USB MIDI adapter + id ID string for the USB MIDI adapter + buflen MIDI buffer length + qlen USB read request queue length + in_ports number of MIDI input ports + out_ports number of MIDI output ports + ========== ====================================
Documentation/ABI/testing/configfs-usb-gadget-printer +4 -2
@@ -4,6 +4,8 @@ KernelVersion: 4.1 Description: The attributes: - pnp_string - Data to be passed to the host in pnp string - q_len - Number of requests per endpoint + ========== =========================================== + pnp_string Data to be passed to the host in pnp string + q_len Number of requests per endpoint + ========== ===========================================
Documentation/ABI/testing/configfs-usb-gadget-sourcesink +10 -8
@@ -4,11 +4,13 @@ KernelVersion: 3.13 Description: The attributes: - pattern - 0 (all zeros), 1 (mod63), 2 (none) - isoc_interval - 1..16 - isoc_maxpacket - 0 - 1023 (fs), 0 - 1024 (hs/ss) - isoc_mult - 0..2 (hs/ss only) - isoc_maxburst - 0..15 (ss only) - buflen - buffer length - bulk_qlen - depth of queue for bulk - iso_qlen - depth of queue for iso + ============== ================================== + pattern 0 (all zeros), 1 (mod63), 2 (none) + isoc_interval 1..16 + isoc_maxpacket 0 - 1023 (fs), 0 - 1024 (hs/ss) + isoc_mult 0..2 (hs/ss only) + isoc_maxburst 0..15 (ss only) + buflen buffer length + bulk_qlen depth of queue for bulk + iso_qlen depth of queue for iso + ============== ==================================
Documentation/ABI/testing/configfs-usb-gadget-subset +6 -4
@@ -4,11 +4,13 @@ KernelVersion: 3.11 Description: The attributes: - ifname - network device interface name associated with + ========== ============================================= + ifname network device interface name associated with this function instance - qmult - queue length multiplier for high and + qmult queue length multiplier for high and super speed - host_addr - MAC address of host's end of this + host_addr MAC address of host's end of this Ethernet over USB link - dev_addr - MAC address of device's end of this + dev_addr MAC address of device's end of this Ethernet over USB link + ========== =============================================
Documentation/ABI/testing/configfs-usb-gadget-uac2 +8 -6
@@ -4,9 +4,11 @@ KernelVersion: 3.18 Description: The attributes: - c_chmask - capture channel mask - c_srate - capture sampling rate - c_ssize - capture sample size (bytes) - p_chmask - playback channel mask - p_srate - playback sampling rate - p_ssize - playback sample size (bytes) + ========= ============================ + c_chmask capture channel mask + c_srate capture sampling rate + c_ssize capture sample size (bytes) + p_chmask playback channel mask + p_srate playback sampling rate + p_ssize playback sample size (bytes) + ========= ============================
Documentation/ABI/testing/configfs-usb-gadget-uvc +1 -1
@@ -55,7 +55,7 @@ Description: Default output terminal descriptors ============== ============================================= iTerminal index of string descriptor - bSourceID id of the terminal to which this terminal + bSourceID id of the terminal to which this terminal is connected bAssocTerminal id of the input terminal to which this output terminal is associated
Documentation/ABI/testing/debugfs-cec-error-inj +1 -1
@@ -23,7 +23,7 @@ error injections without having to know the details of the driver-specific commands. Note that the output of 'error-inj' shall be valid as input to 'error-inj'. -So this must work: +So this must work:: $ cat error-inj >einj.txt $ cat einj.txt >error-inj
Documentation/ABI/testing/debugfs-driver-habanalabs +9 -3
@@ -20,9 +20,13 @@ Description: Allow the root user to disable/enable in runtime the clock The user can supply a bitmask value, each bit represents a different engine to disable/enable its clock gating feature. The bitmask is composed of 20 bits: - 0 - 7 : DMA channels - 8 - 11 : MME engines - 12 - 19 : TPC engines + + ======= ============ + 0 - 7 DMA channels + 8 - 11 MME engines + 12 - 19 TPC engines + ======= ============ + The bit's location of a specific engine can be determined using (1 << GAUDI_ENGINE_ID_*). GAUDI_ENGINE_ID_* values are defined in uapi habanalabs.h file in enum gaudi_engine_id
@@ -59,6 +63,7 @@ Description: Allows the root user to read or write directly through the the generic Linux user-space PCI mapping) because the DDR bar is very small compared to the DDR memory and only the driver can move the bar before and after the transaction. + If the IOMMU is disabled, it also allows the root user to read or write from the host a device VA of a host mapped memory
@@ -73,6 +78,7 @@ Description: Allows the root user to read or write 64 bit data directly the generic Linux user-space PCI mapping) because the DDR bar is very small compared to the DDR memory and only the driver can move the bar before and after the transaction. + If the IOMMU is disabled, it also allows the root user to read or write from the host a device VA of a host mapped memory
Documentation/ABI/testing/debugfs-pfo-nx-crypto +14 -14
@@ -4,42 +4,42 @@ KernelVersion: 3.4 Contact: Kent Yoder <[email protected]> Description: - These debugfs interfaces are built by the nx-crypto driver, built in +These debugfs interfaces are built by the nx-crypto driver, built in arch/powerpc/crypto/nx. Error Detection =============== errors: -- A u32 providing a total count of errors since the driver was loaded. The -only errors counted here are those returned from the hcall, H_COP_OP. + A u32 providing a total count of errors since the driver was loaded. The + only errors counted here are those returned from the hcall, H_COP_OP. last_error: -- The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not -recorded here (the hcall will retry until -EBUSY goes away). + The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not + recorded here (the hcall will retry until -EBUSY goes away). last_error_pid: -- The process ID of the process who received the most recent error from the -hcall. + The process ID of the process who received the most recent error from the + hcall. Device Use ========== aes_bytes: -- The total number of bytes encrypted using AES in any of the driver's -supported modes. + The total number of bytes encrypted using AES in any of the driver's + supported modes. aes_ops: -- The total number of AES operations submitted to the hardware. + The total number of AES operations submitted to the hardware. sha256_bytes: -- The total number of bytes hashed by the hardware using SHA-256. + The total number of bytes hashed by the hardware using SHA-256. sha256_ops: -- The total number of SHA-256 operations submitted to the hardware. + The total number of SHA-256 operations submitted to the hardware. sha512_bytes: -- The total number of bytes hashed by the hardware using SHA-512. + The total number of bytes hashed by the hardware using SHA-512. sha512_ops: -- The total number of SHA-512 operations submitted to the hardware. + The total number of SHA-512 operations submitted to the hardware.
Documentation/ABI/testing/debugfs-pktcdvd +1 -1
@@ -10,7 +10,7 @@ these files in debugfs: /sys/kernel/debug/pktcdvd/pktcdvd[0-7]/ ==== ====== ==================================== - info (0444) Lots of driver statistics and infos. + info 0444 Lots of driver statistics and infos. ==== ====== ==================================== Example::
Documentation/ABI/testing/debugfs-turris-mox-rwtm +6 -4
@@ -2,10 +2,12 @@ What: /sys/kernel/debug/turris-mox-rwtm/do_sign Date: Jun 2020 KernelVersion: 5.8 Contact: Marek Behún <[email protected]> -Description: (W) - Message to sign with the ECDSA private key stored in +Description: + + === =========================================================== + (W) Message to sign with the ECDSA private key stored in device's OTP. The message must be exactly 64 bytes (since this is intended for SHA-512 hashes). - (R) - The resulting signature, 136 bytes. This contains the R and + (R) The resulting signature, 136 bytes. This contains the R and S values of the ECDSA signature, both in big-endian format. + === ===========================================================
Documentation/ABI/testing/debugfs-wilco-ec +11 -10
@@ -27,16 +27,17 @@ Description: for writing, two for the type and at least a single byte of data. - Example: - // Request EC info type 3 (EC firmware build date) - // Corresponds with sending type 0x00f0 with - // MBOX = [38, 00, 03, 00] - $ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw - // View the result. The decoded ASCII result "12/21/18" is - // included after the raw hex. - // Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...] - $ cat /sys/kernel/debug/wilco_ec/raw - 00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 ..12/21/18.8... + Example:: + + // Request EC info type 3 (EC firmware build date) + // Corresponds with sending type 0x00f0 with + // MBOX = [38, 00, 03, 00] + $ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw + // View the result. The decoded ASCII result "12/21/18" is + // included after the raw hex. + // Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...] + $ cat /sys/kernel/debug/wilco_ec/raw + 00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 ..12/21/18.8... Note that the first 16 bytes of the received MBOX[] will be printed, even if some of the data is junk, and skipping bytes
Documentation/ABI/testing/dell-smbios-wmi +16 -16
@@ -10,29 +10,29 @@ Description: <uapi/linux/wmi.h> 1) To perform an SMBIOS call from userspace, you'll need to - first determine the minimum size of the calling interface - buffer for your machine. - Platforms that contain larger buffers can return larger - objects from the system firmware. - Commonly this size is either 4k or 32k. + first determine the minimum size of the calling interface + buffer for your machine. + Platforms that contain larger buffers can return larger + objects from the system firmware. + Commonly this size is either 4k or 32k. - To determine the size of the buffer read() a u64 dword from - the WMI character device /dev/wmi/dell-smbios. + To determine the size of the buffer read() a u64 dword from + the WMI character device /dev/wmi/dell-smbios. 2) After you've determined the minimum size of the calling - interface buffer, you can allocate a structure that represents - the structure documented above. + interface buffer, you can allocate a structure that represents + the structure documented above. 3) In the 'length' object store the size of the buffer you - determined above and allocated. + determined above and allocated. 4) In this buffer object, prepare as necessary for the SMBIOS - call you're interested in. Typically SMBIOS buffers have - "class", "select", and "input" defined to values that coincide - with the data you are interested in. - Documenting class/select/input values is outside of the scope - of this documentation. Check with the libsmbios project for - further documentation on these values. + call you're interested in. Typically SMBIOS buffers have + "class", "select", and "input" defined to values that coincide + with the data you are interested in. + Documenting class/select/input values is outside of the scope + of this documentation. Check with the libsmbios project for + further documentation on these values. 6) Run the call by using ioctl() as described in the header.
Documentation/ABI/testing/gpio-cdev +7 -6
@@ -12,15 +12,16 @@ Description: The following file operations are supported: open(2) - Currently the only useful flags are O_RDWR. + Currently the only useful flags are O_RDWR. ioctl(2) - Initiate various actions. - See the inline documentation in [include/uapi]<linux/gpio.h> - for descriptions of all ioctls. + Initiate various actions. + + See the inline documentation in [include/uapi]<linux/gpio.h> + for descriptions of all ioctls. close(2) - Stops and free up the I/O contexts that was associated - with the file descriptor. + Stops and free up the I/O contexts that was associated + with the file descriptor. Users: TBD
Documentation/ABI/testing/procfs-diskstats +4 -2
@@ -35,7 +35,9 @@ Description: Kernel 5.5+ appends two more fields for flush requests: - 19 - flush requests completed successfully - 20 - time spent flushing + == ===================================== + 19 flush requests completed successfully + 20 time spent flushing + == ===================================== For more details refer to Documentation/admin-guide/iostats.rst
Documentation/ABI/testing/procfs-smaps_rollup +24 -24
52 lines not on this page · raw message
Documentation/ABI/testing/pstore +9 -10
@@ -9,25 +9,25 @@ Description: Generic interface to platform dependent persistent storage. provide a generic interface to show records captured in the dying moments. In the case of a panic the last part of the console log is captured, but other interesting - data can also be saved. + data can also be saved:: - # mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore + # mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore - $ ls -l /sys/fs/pstore/ - total 0 - -r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1 + $ ls -l /sys/fs/pstore/ + total 0 + -r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1 Different users of this interface will result in different filename prefixes. Currently two are defined: - "dmesg" - saved console log - "mce" - architecture dependent data from fatal h/w error + - "dmesg" - saved console log + - "mce" - architecture dependent data from fatal h/w error Once the information in a file has been read, removing the file will signal to the underlying persistent storage - device that it can reclaim the space for later re-use. + device that it can reclaim the space for later re-use:: - $ rm /sys/fs/pstore/dmesg-erst-1 + $ rm /sys/fs/pstore/dmesg-erst-1 The expectation is that all files in /sys/fs/pstore/ will be saved elsewhere and erased from persistent store
@@ -44,4 +44,3 @@ Description: Generic interface to platform dependent persistent storage. backends are available, the preferred backend may be set by passing the pstore.backend= argument to the kernel at boot time. -
Documentation/ABI/testing/sysfs-block-rnbd +2 -2
@@ -9,9 +9,9 @@ Description: To unmap a volume, "normal" or "force" has to be written to: is using the device. When "force" is used, the device is also unmapped when device is in use. All I/Os that are in progress will fail. - Example: + Example:: - # echo "normal" > /sys/block/rnbd0/rnbd/unmap_device + # echo "normal" > /sys/block/rnbd0/rnbd/unmap_device What: /sys/block/rnbd<N>/rnbd/state Date: Feb 2020
Documentation/ABI/testing/sysfs-bus-acpi +1 -0
@@ -5,6 +5,7 @@ Description: This attribute indicates the full path of ACPI namespace object associated with the device object. For example, \_SB_.PCI0. + This file is not present for device objects representing fixed ACPI hardware features (like power and sleep buttons).
Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 +4 -1
@@ -4,7 +4,10 @@ KernelVersion: 3.19 Contact: Mathieu Poirier <[email protected]> Description: (RW) Add/remove a sink from a trace path. There can be multiple source for a single sink. - ex: echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink + + ex:: + + echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink What: /sys/bus/coresight/devices/<memory_map>.etb/trigger_cntr Date: November 2014
Documentation/ABI/testing/sysfs-bus-css +3 -0
@@ -20,6 +20,7 @@ Contact: Cornelia Huck <[email protected]> Description: Contains the ids of the channel paths used by this subchannel, as reported by the channel subsystem during subchannel recognition. + Note: This is an I/O-subchannel specific attribute. Users: s390-tools, HAL
@@ -31,6 +32,7 @@ Description: Contains the PIM/PAM/POM values, as reported by the channel subsystem when last queried by the common I/O layer (this implies that this attribute is not necessarily in sync with the values current in the channel subsystem). + Note: This is an I/O-subchannel specific attribute. Users: s390-tools, HAL
@@ -53,6 +55,7 @@ Description: This file allows the driver for a device to be specified. When opt-out of driver binding using a driver_override name such as "none". Only a single driver may be specified in the override, there is no support for parsing delimiters. + Note that unlike the mechanism of the same name for pci, this file does not allow to override basic matching rules. I.e., the driver must still match the subchannel type of the device.
Documentation/ABI/testing/sysfs-bus-dfl +2 -0
@@ -4,6 +4,7 @@ KernelVersion: 5.10 Contact: Xu Yilun <[email protected]> Description: Read-only. It returns type of DFL FIU of the device. Now DFL supports 2 FIU types, 0 for FME, 1 for PORT. + Format: 0x%x What: /sys/bus/dfl/devices/dfl_dev.X/feature_id
@@ -12,4 +13,5 @@ KernelVersion: 5.10 Contact: Xu Yilun <[email protected]> Description: Read-only. It returns feature identifier local to its DFL FIU type. + Format: 0x%x
Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 +3 -3
@@ -7,7 +7,7 @@ Description: Read-only. Attribute group to describe the magic bits Each attribute under this group defines a bit range of the perf_event_attr.config. All supported attributes are listed - below. + below:: chip = "config:16-31" core = "config:16-31"
@@ -16,9 +16,9 @@ Description: Read-only. Attribute group to describe the magic bits offset = "config:32-63" vcpu = "config:16-31" - For example, + For example:: - PM_PB_CYC = "domain=1,offset=0x80,chip=?,lpar=0x0" + PM_PB_CYC = "domain=1,offset=0x80,chip=?,lpar=0x0" In this event, '?' after chip specifies that this value will be provided by user while running this event.
Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci +4 -3
@@ -7,7 +7,7 @@ Description: Read-only. Attribute group to describe the magic bits Each attribute under this group defines a bit range of the perf_event_attr.config. All supported attributes are listed - below. + below:: counter_info_version = "config:16-23" length = "config:24-31"
@@ -20,9 +20,9 @@ Description: Read-only. Attribute group to describe the magic bits secondary_index = "config:0-15" starting_index = "config:32-63" - For example, + For example:: - processor_core_utilization_instructions_completed = "request=0x94, + processor_core_utilization_instructions_completed = "request=0x94, phys_processor_idx=?,counter_info_version=0x8, length=8,offset=0x18"
@@ -36,6 +36,7 @@ Description: '0' if the hypervisor is configured to forbid access to event counters being accumulated by other guests and to physical domain event counters. + '1' if that access is allowed. What: /sys/bus/event_source/devices/hv_gpci/interface/ga
Documentation/ABI/testing/sysfs-bus-fcoe +45 -23
126 lines not on this page · raw message
Documentation/ABI/testing/sysfs-bus-fsl-mc +8 -4
@@ -6,8 +6,10 @@ Description: the driver to attempt to bind to the device found at this location. The format for the location is Object.Id and is the same as found in /sys/bus/fsl-mc/devices/. - For example: - # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/bind + + For example:: + + # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/bind What: /sys/bus/fsl-mc/drivers/.../unbind Date: December 2016
@@ -17,5 +19,7 @@ Description: driver to attempt to unbind from the device found at this location. The format for the location is Object.Id and is the same as found in /sys/bus/fsl-mc/devices/. - For example: - # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind + + For example:: + + # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind
Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 +16 -10
@@ -3,19 +3,25 @@ Date: February 2011 Contact: Minkyu Kang <[email protected]> Description: show what device is attached - NONE - no device - USB - USB device is attached - UART - UART is attached - CHARGER - Charger is attaced - JIG - JIG is attached + + ======= ====================== + NONE no device + USB USB device is attached + UART UART is attached + CHARGER Charger is attaced + JIG JIG is attached + ======= ====================== What: /sys/bus/i2c/devices/.../switch Date: February 2011 Contact: Minkyu Kang <[email protected]> Description: show or set the state of manual switch - VAUDIO - switch to VAUDIO path - UART - switch to UART path - AUDIO - switch to AUDIO path - DHOST - switch to DHOST path - AUTO - switch automatically by device + + ======= ============================== + VAUDIO switch to VAUDIO path + UART switch to UART path + AUDIO switch to AUDIO path + DHOST switch to DHOST path + AUTO switch automatically by device + ======= ==============================
Documentation/ABI/testing/sysfs-bus-i3c +2 -0
@@ -84,6 +84,7 @@ Description: by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl". See the I3C specification for more details about these HDR modes. + This entry describes the HDRCAP of the master controller driving the bus.
@@ -135,6 +136,7 @@ Description: Expose the HDR (High Data Rate) capabilities of a device. Returns a list of supported HDR mode, each element is separated by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl". + See the I3C specification for more details about these HDR modes.
Documentation/ABI/testing/sysfs-bus-iio +18 -1
@@ -15,6 +15,7 @@ Description: based on hardware generated events (e.g. data ready) or provided by a separate driver for other hardware (e.g. periodic timer, GPIO or high resolution timer). + Contains trigger type specific elements. These do not generalize well and hence are not documented in this file. X is the IIO index of the trigger.
@@ -666,6 +667,7 @@ Description: <type>[Y][_name]_<raw|input>_thresh_falling_value may take different values, but the device can only enable both thresholds or neither. + Note the driver will assume the last p events requested are to be enabled where p is how many it supports (which may vary depending on the exact set requested. So if you want to be
@@ -720,6 +722,7 @@ Description: <type>[Y][_name]_<raw|input>_roc_falling_value may take different values, but the device can only enable both rate of change thresholds or neither. + Note the driver will assume the last p events requested are to be enabled where p is however many it supports (which may vary depending on the exact set requested. So if you want to be
@@ -775,9 +778,11 @@ Description: Specifies the value of threshold that the device is comparing against for the events enabled by <type>Y[_name]_thresh[_rising|falling]_en. + If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single threshold value applies to both directions. + The raw or input element of the name indicates whether the value is in raw device units or in processed units (as _raw and _input do on sysfs direct channel read attributes).
@@ -860,6 +865,7 @@ Description: If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single hysteresis value applies to both directions. + For falling events the hysteresis is added to the _value attribute for this event to get the upper threshold for when the event goes back to normal, for rising events the hysteresis is subtracted from the _value
@@ -906,6 +912,7 @@ Description: Specifies the value of rate of change threshold that the device is comparing against for the events enabled by <type>[Y][_name]_roc[_rising|falling]_en. + If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single threshold value applies to both directions.
@@ -1305,6 +1312,7 @@ Description: Proximity measurement indicating that some object is near the sensor, usually by observing reflectivity of infrared or ultrasound emitted. + Often these sensors are unit less and as such conversion to SI units is not possible. Higher proximity measurements indicate closer objects, and vice versa. Units after
@@ -1450,9 +1458,12 @@ Contact: [email protected] Description: A single positive integer specifying the maximum number of scan elements to wait for. + Poll will block until the watermark is reached. + Blocking read will wait until the minimum between the requested read amount or the low water mark is available. + Non-blocking read will retrieve the available samples from the buffer even if there are less samples then watermark level. This allows the application to block on poll with a timeout and read
@@ -1481,11 +1492,13 @@ Description: device settings allows it (e.g. if a trigger is set that samples data differently that the hardware fifo does then hardware fifo will not enabled). + If the hardware fifo is enabled and the level of the hardware fifo reaches the hardware fifo watermark level the device will flush its hardware fifo to the device buffer. Doing a non blocking read on the device when no samples are present in the device buffer will also force a flush. + When the hardware fifo is enabled there is no need to use a trigger to use buffer mode since the watermark settings guarantees that the hardware fifo is flushed to the device
@@ -1523,6 +1536,7 @@ Description: A single positive integer specifying the minimum watermark level for the hardware fifo of this device. If the device does not have a hardware fifo this entry is not present. + If the user sets buffer/watermark to a value less than this one, then the hardware watermark will remain unset.
@@ -1533,6 +1547,7 @@ Description: A single positive integer specifying the maximum watermark level for the hardware fifo of this device. If the device does not have a hardware fifo this entry is not present. + If the user sets buffer/watermark to a value greater than this one, then the hardware watermark will be capped at this value.
@@ -1544,6 +1559,7 @@ Description: levels for the hardware fifo. This entry is optional and if it is not present it means that all the values between hwfifo_watermark_min and hwfifo_watermark_max are supported. + If the user sets buffer/watermark to a value greater than hwfifo_watermak_min but not equal to any of the values in this list, the driver will chose an appropriate value for the
@@ -1605,7 +1621,8 @@ KernelVersion: 4.1.0 Contact: [email protected] Description: '1' (enable) or '0' (disable) specifying the enable - of heater function. Same reading values apply + of heater function. Same reading values apply. + This ABI is especially applicable for humidity sensors to heatup the device and get rid of any condensation in some humidity environment
Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 +5 -0
@@ -19,9 +19,11 @@ Description: is separately set for "GND-Open" and "Supply-Open" modes. Channels 0..31 have common low threshold values, but could have different sensing_modes. + The low voltage threshold range is between 2..21V. Hysteresis between low and high thresholds can not be lower then 2 and can not be odd. + If falling threshold results hysteresis to odd value then rising threshold is automatically subtracted by one.
@@ -34,10 +36,13 @@ Description: this value then the threshold rising event is pushed. Depending on in_voltageY_sensing_mode the high voltage threshold is separately set for "GND-Open" and "Supply-Open" modes. + Channels 0..31 have common high threshold values, but could have different sensing_modes. + The high voltage threshold range is between 3..22V. Hysteresis between low and high thresholds can not be lower then 2 and can not be odd. + If rising threshold results hysteresis to odd value then falling threshold is automatically appended by one.
Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 +3 -0
@@ -5,10 +5,13 @@ Description: The STM32 ADC can be configured to use external trigger sources (e.g. timers, pwm or exti gpio). Then, it can be tuned to start conversions on external trigger by either: + - "rising-edge" - "falling-edge" - "both-edges". + Reading returns current trigger polarity. + Writing value before enabling conversions sets trigger polarity. What: /sys/bus/iio/devices/triggerX/trigger_polarity_available
Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 +5 -2
@@ -15,8 +15,11 @@ Description: first object echoed in meters. Default value is 6.020. This setting limits the time the driver is waiting for a echo. + Showing the range of available values is represented as the minimum value, the step and the maximum value, all enclosed in square brackets. - Example: - [0.043 0.043 11.008] + + Example:: + + [0.043 0.043 11.008]
Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 +2 -0
@@ -8,7 +8,9 @@ KernelVersion: 3.4.0 Contact: [email protected] Description: Reading returns either '1' or '0'. + '1' means that the clock in question is present. + '0' means that the clock is missing. What: /sys/bus/iio/devices/iio:deviceX/pllY_locked
Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 +5 -5
@@ -27,12 +27,12 @@ What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_name KernelVersion: Contact: [email protected] Description: - Reading returns the datasheet name for channel Y: + Reading returns the datasheet name for channel Y:: - out_altvoltage0_name: RF8x - out_altvoltage1_name: RFAUX8x - out_altvoltage2_name: RF16x - out_altvoltage3_name: RF32x + out_altvoltage0_name: RF8x + out_altvoltage1_name: RFAUX8x + out_altvoltage2_name: RF16x + out_altvoltage3_name: RF32x What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown KernelVersion:
Documentation/ABI/testing/sysfs-bus-iio-health-afe440x +8 -4
@@ -6,10 +6,14 @@ Description: Get measured values from the ADC for these stages. Y is the specific stage number corresponding to datasheet stage names as follows: - 1 -> LED2 - 2 -> ALED2/LED3 - 3 -> LED1 - 4 -> ALED1/LED4 + + == ========== + 1 LED2 + 2 ALED2/LED3 + 3 LED1 + 4 ALED1/LED4 + == ========== + Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1 respectively which simply helper channels containing the calculated difference in the value of stage 1 - 2 and 3 - 4.
Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 +4 -2
@@ -15,5 +15,7 @@ Description: Scheme 0 has wider dynamic range, Scheme 1 proximity detection is less affected by the ambient IR noise variation. - 0 Sensing IR from LED and ambient - 1 Sensing IR from LED with ambient IR rejection + == ============================================= + 0 Sensing IR from LED and ambient + 1 Sensing IR from LED with ambient IR rejection + == =============================================
Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth +7 -4
@@ -10,10 +10,13 @@ Date: June 2015 KernelVersion: 4.3 Contact: Alexander Shishkin <[email protected]> Description: (RO) Output port type: - 0: not present, - 1: MSU (Memory Storage Unit) - 2: CTP (Common Trace Port) - 4: PTI (MIPI PTI). + + == ========================= + 0 not present, + 1 MSU (Memory Storage Unit) + 2 CTP (Common Trace Port) + 4 PTI (MIPI PTI). + == ========================= What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_drop Date: June 2015
Documentation/ABI/testing/sysfs-bus-papr-pmem +15 -8
@@ -11,19 +11,26 @@ Description: at 'Documentation/powerpc/papr_hcalls.rst' . Below are the flags reported in this sysfs file: - * "not_armed" : Indicates that NVDIMM contents will not + * "not_armed" + Indicates that NVDIMM contents will not survive a power cycle. - * "flush_fail" : Indicates that NVDIMM contents + * "flush_fail" + Indicates that NVDIMM contents couldn't be flushed during last shut-down event. - * "restore_fail": Indicates that NVDIMM contents + * "restore_fail" + Indicates that NVDIMM contents couldn't be restored during NVDIMM initialization. - * "encrypted" : NVDIMM contents are encrypted. - * "smart_notify": There is health event for the NVDIMM. - * "scrubbed" : Indicating that contents of the + * "encrypted" + NVDIMM contents are encrypted. + * "smart_notify" + There is health event for the NVDIMM. + * "scrubbed" + Indicating that contents of the NVDIMM have been scrubbed. - * "locked" : Indicating that NVDIMM contents cant + * "locked" + Indicating that NVDIMM contents cant be modified until next power cycle. What: /sys/bus/nd/devices/nmemX/papr/perf_stats
@@ -51,4 +58,4 @@ Description: * "MedWDur " : Media Write Duration * "CchRHCnt" : Cache Read Hit Count * "CchWHCnt" : Cache Write Hit Count - * "FastWCnt" : Fast Write Count + * "FastWCnt" : Fast Write Count
Documentation/ABI/testing/sysfs-bus-pci +14 -8
@@ -7,8 +7,10 @@ Description: this location. This is useful for overriding default bindings. The format for the location is: DDDD:BB:DD.F. That is Domain:Bus:Device.Function and is the same as - found in /sys/bus/pci/devices/. For example: - # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind + found in /sys/bus/pci/devices/. For example:: + + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind + (Note: kernels before 2.6.28 may require echo -n). What: /sys/bus/pci/drivers/.../unbind
@@ -20,8 +22,10 @@ Description: this location. This may be useful when overriding default bindings. The format for the location is: DDDD:BB:DD.F. That is Domain:Bus:Device.Function and is the same as - found in /sys/bus/pci/devices/. For example: - # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind + found in /sys/bus/pci/devices/. For example:: + + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind + (Note: kernels before 2.6.28 may require echo -n). What: /sys/bus/pci/drivers/.../new_id
@@ -38,8 +42,9 @@ Description: Class, Class Mask, and Private Driver Data. The Vendor ID and Device ID fields are required, the rest are optional. Upon successfully adding an ID, the driver will probe - for the device and attempt to bind to it. For example: - # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id + for the device and attempt to bind to it. For example:: + + # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id What: /sys/bus/pci/drivers/.../remove_id Date: February 2009
@@ -54,8 +59,9 @@ Description: required, the rest are optional. After successfully removing an ID, the driver will no longer support the device. This is useful to ensure auto probing won't - match the driver to the device. For example: - # echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id + match the driver to the device. For example:: + + # echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id What: /sys/bus/pci/rescan Date: January 2009
Documentation/ABI/testing/sysfs-bus-pci-devices-catpt +1 -0
@@ -4,6 +4,7 @@ Contact: Cezary Rojewski <[email protected]> Description: Version of AudioDSP firmware ASoC catpt driver is communicating with. + Format: %d.%d.%d.%d, type:major:minor:build. What: /sys/devices/pci0000:00/<dev>/fw_info
Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd +2 -2
@@ -21,11 +21,11 @@ Description: number returns the port to normal operation. For example: To force the high-speed device attached to - port 4 on bus 2 to run at full speed: + port 4 on bus 2 to run at full speed:: echo 4 >/sys/bus/usb/devices/usb2/../companion - To return the port to high-speed operation: + To return the port to high-speed operation:: echo -4 >/sys/bus/usb/devices/usb2/../companion
Documentation/ABI/testing/sysfs-bus-rbd +24 -13
@@ -7,6 +7,8 @@ Description: Usage: <mon ip addr> <options> <pool name> <rbd image name> [<snap name>] + Example:: + $ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add The snapshot name can be "-" or omitted to map the image
@@ -23,6 +25,8 @@ Description: Usage: <dev-id> [force] + Example:: + $ echo 2 > /sys/bus/rbd/remove Optional "force" argument which when passed will wait for
@@ -80,26 +84,29 @@ Date: Oct, 2010 KernelVersion: v2.6.37 Contact: Sage Weil <[email protected]> Description: - size: (RO) The size (in bytes) of the mapped block + + ============== ================================================ + size (RO) The size (in bytes) of the mapped block device. - major: (RO) The block device major number. + major (RO) The block device major number. - client_id: (RO) The ceph unique client id that was assigned + client_id (RO) The ceph unique client id that was assigned for this specific session. - pool: (RO) The name of the storage pool where this rbd + pool (RO) The name of the storage pool where this rbd image resides. An rbd image name is unique within its pool. - name: (RO) The name of the rbd image. + name (RO) The name of the rbd image. - refresh: (WO) Writing to this file will reread the image + refresh (WO) Writing to this file will reread the image header data and set all relevant data structures accordingly. - current_snap: (RO) The current snapshot for which the device + current_snap (RO) The current snapshot for which the device is mapped. + ============== ================================================ What: /sys/bus/rbd/devices/<dev-id>/pool_id
@@ -117,11 +124,13 @@ Date: Oct, 2012 KernelVersion: v3.7 Contact: Sage Weil <[email protected]> Description: - image_id: (RO) The unique id for the rbd image. (For rbd + ========= =============================================== + image_id (RO) The unique id for the rbd image. (For rbd image format 1 this is empty.) - features: (RO) A hexadecimal encoding of the feature bits + features (RO) A hexadecimal encoding of the feature bits for this image. + ========= =============================================== What: /sys/bus/rbd/devices/<dev-id>/parent
@@ -149,14 +158,16 @@ Date: Aug, 2016 KernelVersion: v4.9 Contact: Sage Weil <[email protected]> Description: - snap_id: (RO) The current snapshot's id. + ============ ================================================ + snap_id (RO) The current snapshot's id. - config_info: (RO) The string written into + config_info (RO) The string written into /sys/bus/rbd/add{,_single_major}. - cluster_fsid: (RO) The ceph cluster UUID. + cluster_fsid (RO) The ceph cluster UUID. - client_addr: (RO) The ceph unique client + client_addr (RO) The ceph unique client entity_addr_t (address + nonce). The format is <address>:<port>/<nonce>: '1.2.3.4:1234/5678' or '[1:2:3:4:5:6:7:8]:1234/5678'. + ============ ================================================
Documentation/ABI/testing/sysfs-bus-siox +3 -0
@@ -8,6 +8,7 @@ Description: When the file contains a "1" the bus is operated and periodically does a push-pull cycle to write and read data from the connected devices. + When writing a "0" or "1" the bus moves to the described state. What: /sys/bus/siox/devices/siox-X/device_add
@@ -21,8 +22,10 @@ Description: to add a new device dynamically. <type> is the name that is used to match to a driver (similar to the platform bus). <inbytes> and <outbytes> define the length of the input and output shift register in bytes respectively. + <statustype> defines the 4 bit device type that is check to identify connection problems. + The new device is added to the end of the existing chain. What: /sys/bus/siox/devices/siox-X/device_remove
Documentation/ABI/testing/sysfs-bus-thunderbolt +11 -7
@@ -193,10 +193,11 @@ Description: When new NVM image is written to the non-active NVM verification fails an error code is returned instead. This file will accept writing values "1" or "2" + - Writing "1" will flush the image to the storage - area and authenticate the image in one action. + area and authenticate the image in one action. - Writing "2" will run some basic validation on the image - and flush it to the storage area. + and flush it to the storage area. When read holds status of the last authentication operation if an error occurred during the process. This
@@ -213,9 +214,11 @@ Description: This contains name of the property directory the XDomain question. Following directories are already reserved by the Apple XDomain specification: - network: IP/ethernet over Thunderbolt - targetdm: Target disk mode protocol over Thunderbolt - extdisp: External display mode protocol over Thunderbolt + ======== =============================================== + network IP/ethernet over Thunderbolt + targetdm Target disk mode protocol over Thunderbolt + extdisp External display mode protocol over Thunderbolt + ======== =============================================== What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/modalias Date: Jan 2018
@@ -293,7 +296,8 @@ Description: For supported devices, automatically authenticate the new Thunderbo image when the device is disconnected from the host system. This file will accept writing values "1" or "2" + - Writing "1" will flush the image to the storage - area and prepare the device for authentication on disconnect. + area and prepare the device for authentication on disconnect. - Writing "2" will run some basic validation on the image - and flush it to the storage area. + and flush it to the storage area.
Documentation/ABI/testing/sysfs-bus-usb +2 -0
@@ -9,6 +9,7 @@ Description: by writing INTERFACE to /sys/bus/usb/drivers_probe This allows to avoid side-effects with drivers that need multiple interfaces. + A deauthorized interface cannot be probed or claimed. What: /sys/bus/usb/devices/usbX/interface_authorized_default
@@ -216,6 +217,7 @@ Description: - Bit 0 of this field selects the "old" enumeration scheme, as it is considerably faster (it only causes one USB reset instead of 2). + The old enumeration scheme can also be selected globally using /sys/module/usbcore/parameters/old_scheme_first, but it is often not desirable as the new scheme was introduced to
Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 +16 -10
@@ -6,8 +6,10 @@ Description: Get the ALS output channel used as input in ALS-current-control mode (0, 1), where: - 0 - out_current0 (backlight 0) - 1 - out_current1 (backlight 1) + == ========================== + 0 out_current0 (backlight 0) + 1 out_current1 (backlight 1) + == ========================== What: /sys/class/backlight/<backlight>/als_en Date: May 2012
@@ -30,8 +32,10 @@ Contact: Johan Hovold <[email protected]> Description: Set the brightness-mapping mode (0, 1), where: - 0 - exponential mode - 1 - linear mode + == ================ + 0 exponential mode + 1 linear mode + == ================ What: /sys/class/backlight/<backlight>/pwm Date: April 2012
@@ -40,9 +44,11 @@ Contact: Johan Hovold <[email protected]> Description: Set the PWM-input control mask (5 bits), where: - bit 5 - PWM-input enabled in Zone 4 - bit 4 - PWM-input enabled in Zone 3 - bit 3 - PWM-input enabled in Zone 2 - bit 2 - PWM-input enabled in Zone 1 - bit 1 - PWM-input enabled in Zone 0 - bit 0 - PWM-input enabled + ===== =========================== + bit 5 PWM-input enabled in Zone 4 + bit 4 PWM-input enabled in Zone 3 + bit 3 PWM-input enabled in Zone 2 + bit 2 PWM-input enabled in Zone 1 + bit 1 PWM-input enabled in Zone 0 + bit 0 PWM-input enabled + ===== ===========================
Documentation/ABI/testing/sysfs-class-bdi +0 -1
@@ -24,7 +24,6 @@ default filesystems which do not provide their own BDI. Files under /sys/class/bdi/<bdi>/ ---------------------------------- read_ahead_kb (read-write)
Documentation/ABI/testing/sysfs-class-chromeos +8 -7
@@ -17,13 +17,14 @@ Date: August 2015 KernelVersion: 4.2 Description: Tell the EC to reboot in various ways. Options are: - "cancel": Cancel a pending reboot. - "ro": Jump to RO without rebooting. - "rw": Jump to RW without rebooting. - "cold": Cold reboot. - "disable-jump": Disable jump until next reboot. - "hibernate": Hibernate the EC. - "at-shutdown": Reboot after an AP shutdown. + + - "cancel": Cancel a pending reboot. + - "ro": Jump to RO without rebooting. + - "rw": Jump to RW without rebooting. + - "cold": Cold reboot. + - "disable-jump": Disable jump until next reboot. + - "hibernate": Hibernate the EC. + - "at-shutdown": Reboot after an AP shutdown. What: /sys/class/chromeos/<ec-device-name>/version Date: August 2015
Documentation/ABI/testing/sysfs-class-cxl +6 -2
@@ -217,6 +217,7 @@ Description: read/write card. A power cycle is required to load the image. "none" could be useful for debugging because the trace arrays are preserved. + "user" and "factory" means PERST will cause either the user or user or factory image to be loaded. Default is to reload on PERST whichever image the card has
@@ -240,8 +241,11 @@ Contact: [email protected] Description: read/write Trust that when an image is reloaded via PERST, it will not have changed. - 0 = don't trust, the image may be different (default) - 1 = trust that the image will not change. + + == ================================================= + 0 don't trust, the image may be different (default) + 1 trust that the image will not change. + == ================================================= Users: https://github.com/ibm-capi/libcxl What: /sys/class/cxl/<card>/psl_timebase_synced
Documentation/ABI/testing/sysfs-class-devlink +17 -13
@@ -18,9 +18,9 @@ Description: This will be one of the following strings: - 'consumer unbind' - 'supplier unbind' - 'never' + - 'consumer unbind' + - 'supplier unbind' + - 'never' 'consumer unbind' means the device link will be removed when the consumer's driver is unbound from the consumer device.
@@ -49,8 +49,10 @@ Description: This will be one of the following strings: - '0' - Does not affect runtime power management - '1' - Affects runtime power management + === ======================================== + '0' Does not affect runtime power management + '1' Affects runtime power management + === ======================================== What: /sys/class/devlink/.../status Date: May 2020
@@ -68,13 +70,13 @@ Description: This will be one of the following strings: - 'not tracked' - 'dormant' - 'available' - 'consumer probing' - 'active' - 'supplier unbinding' - 'unknown' + - 'not tracked' + - 'dormant' + - 'available' + - 'consumer probing' + - 'active' + - 'supplier unbinding' + - 'unknown' 'not tracked' means this device link does not track the status and has no impact on the binding, unbinding and syncing the
@@ -114,8 +116,10 @@ Description: This will be one of the following strings: + === ================================ '0' - '1' - Affects runtime power management + '1' Affects runtime power management + === ================================ '0' means the device link can affect other device behaviors like binding/unbinding, suspend/resume, runtime power
Documentation/ABI/testing/sysfs-class-extcon +19 -15
@@ -39,19 +39,22 @@ Description: callback. If the default callback for showing function is used, the - format is like this: - # cat state - USB_OTG=1 - HDMI=0 - TA=1 - EAR_JACK=0 - # + format is like this:: + + # cat state + USB_OTG=1 + HDMI=0 + TA=1 + EAR_JACK=0 + # + In this example, the extcon device has USB_OTG and TA cables attached and HDMI and EAR_JACK cables detached. In order to update the state of an extcon device, enter a hex - state number starting with 0x: - # echo 0xHEX > state + state number starting with 0x:: + + # echo 0xHEX > state This updates the whole state of the extcon device. Inputs of all the methods are required to meet the
@@ -84,12 +87,13 @@ Contact: MyungJoo Ham <[email protected]> Description: Shows the relations of mutually exclusiveness. For example, if the mutually_exclusive array of extcon device is - {0x3, 0x5, 0xC, 0x0}, then the output is: - # ls mutually_exclusive/ - 0x3 - 0x5 - 0xc - # + {0x3, 0x5, 0xC, 0x0}, then the output is:: + + # ls mutually_exclusive/ + 0x3 + 0x5 + 0xc + # Note that mutually_exclusive is a sub-directory of the extcon device and the file names under the mutually_exclusive
Documentation/ABI/testing/sysfs-class-fpga-manager +2 -3
@@ -28,8 +28,7 @@ Description: Read fpga manager state as a string. * firmware request = firmware class request in progress * firmware request error = firmware request failed * write init = preparing FPGA for programming - * write init error = Error while preparing FPGA for - programming + * write init error = Error while preparing FPGA for programming * write = FPGA ready to receive image data * write error = Error while programming * write complete = Doing post programming steps
@@ -47,7 +46,7 @@ Description: Read fpga manager status as a string. programming errors to userspace. This is a list of strings for the supported status. - * reconfig operation error - invalid operations detected by + * reconfig operation error - invalid operations detected by reconfiguration hardware. e.g. start reconfiguration with errors not cleared
Documentation/ABI/testing/sysfs-class-gnss +2 -0
@@ -6,9 +6,11 @@ Description: The GNSS receiver type. The currently identified types reflect the protocol(s) supported by the receiver: + ====== =========== "NMEA" NMEA 0183 "SiRF" SiRF Binary "UBX" UBX + ====== =========== Note that also non-"NMEA" type receivers typically support a subset of NMEA 0183 with vendor extensions (e.g. to allow
Documentation/ABI/testing/sysfs-class-led +1 -0
@@ -47,6 +47,7 @@ Contact: Richard Purdie <[email protected]> Description: Set the trigger for this LED. A trigger is a kernel based source of LED events. + You can change triggers in a similar manner to the way an IO scheduler is chosen. Trigger specific parameters can appear in /sys/class/leds/<led> once a given trigger is selected. For
Documentation/ABI/testing/sysfs-class-led-driver-el15203000 +15 -15
@@ -27,23 +27,23 @@ Description: ^ | - 0 On -|----+ +----+ +--- + 0 On -|----+ +----+ +--- | | | | | Off-| +-------------------+ +-------------------+ | - 1 On -| +----+ +----+ + 1 On -| +----+ +----+ | | | | | Off |----+ +-------------------+ +------------------ | - 2 On -| +----+ +----+ + 2 On -| +----+ +----+ | | | | | Off-|---------+ +-------------------+ +------------- | - 3 On -| +----+ +----+ + 3 On -| +----+ +----+ | | | | | Off-|--------------+ +-------------------+ +-------- | - 4 On -| +----+ +----+ + 4 On -| +----+ +----+ | | | | | Off-|-------------------+ +-------------------+ +--- |
@@ -55,23 +55,23 @@ Description: ^ | - 0 On -| +-------------------+ +-------------------+ + 0 On -| +-------------------+ +-------------------+ | | | | | Off-|----+ +----+ +--- | - 1 On -|----+ +-------------------+ +------------------ + 1 On -|----+ +-------------------+ +------------------ | | | | | Off | +----+ +----+ | - 2 On -|---------+ +-------------------+ +------------- + 2 On -|---------+ +-------------------+ +------------- | | | | | Off-| +----+ +----+ | - 3 On -|--------------+ +-------------------+ +-------- + 3 On -|--------------+ +-------------------+ +-------- | | | | | Off-| +----+ +----+ | - 4 On -|-------------------+ +-------------------+ +--- + 4 On -|-------------------+ +-------------------+ +--- | | | | | Off-| +----+ +----+ |
@@ -83,23 +83,23 @@ Description: ^ | - 0 On -|----+ +-------- + 0 On -|----+ +-------- | | | Off-| +---------------------------------------+ | - 1 On -| +----+ +----+ + 1 On -| +----+ +----+ | | | | | Off |----+ +-----------------------------+ +-------- | - 2 On -| +----+ +----+ + 2 On -| +----+ +----+ | | | | | Off-|---------+ +-------------------+ +------------- | - 3 On -| +----+ +----+ + 3 On -| +----+ +----+ | | | | | Off-|--------------+ +---------+ +------------------ | - 4 On -| +---------+ + 4 On -| +---------+ | | | Off-|-------------------+ +----------------------- |
Documentation/ABI/testing/sysfs-class-led-driver-lm3533 +26 -18
65 lines not on this page · raw message
Documentation/ABI/testing/sysfs-class-led-flash +18 -9
@@ -55,26 +55,35 @@ Description: read only Flash faults are re-read after strobing the flash. Possible flash faults: - * led-over-voltage - flash controller voltage to the flash LED + * led-over-voltage + flash controller voltage to the flash LED has exceeded the limit specific to the flash controller - * flash-timeout-exceeded - the flash strobe was still on when + * flash-timeout-exceeded + the flash strobe was still on when the timeout set by the user has expired; not all flash controllers may set this in all such conditions - * controller-over-temperature - the flash controller has + * controller-over-temperature + the flash controller has overheated - * controller-short-circuit - the short circuit protection + * controller-short-circuit + the short circuit protection of the flash controller has been triggered - * led-power-supply-over-current - current in the LED power + * led-power-supply-over-current + current in the LED power supply has exceeded the limit specific to the flash controller - * indicator-led-fault - the flash controller has detected + * indicator-led-fault + the flash controller has detected a short or open circuit condition on the indicator LED - * led-under-voltage - flash controller voltage to the flash + * led-under-voltage + flash controller voltage to the flash LED has been below the minimum limit specific to the flash - * controller-under-voltage - the input voltage of the flash + * controller-under-voltage + the input voltage of the flash controller is below the limit under which strobing the flash at full current will not be possible; the condition persists until this flag is no longer set - * led-over-temperature - the temperature of the LED has exceeded + * led-over-temperature + the temperature of the LED has exceeded its allowed upper limit
Documentation/ABI/testing/sysfs-class-led-trigger-netdev +7 -0
@@ -19,18 +19,23 @@ KernelVersion: 4.16 Contact: [email protected] Description: Signal the link state of the named network device. + If set to 0 (default), the LED's normal state is off. + If set to 1, the LED's normal state reflects the link state of the named network device. Setting this value also immediately changes the LED state. + What: /sys/class/leds/<led>/tx Date: Dec 2017 KernelVersion: 4.16 Contact: [email protected] Description: Signal transmission of data on the named network device. + If set to 0 (default), the LED will not blink on transmission. + If set to 1, the LED will blink for the milliseconds specified in interval to signal transmission.
@@ -40,6 +45,8 @@ KernelVersion: 4.16 Contact: [email protected] Description: Signal reception of data on the named network device. + If set to 0 (default), the LED will not blink on reception. + If set to 1, the LED will blink for the milliseconds specified in interval to signal reception.
Documentation/ABI/testing/sysfs-class-led-trigger-usbport +1 -0
@@ -8,5 +8,6 @@ Description: selected for the USB port trigger. Selecting ports makes trigger observing them for any connected devices and lighting on LED if there are any. + Echoing "1" value selects USB port. Echoing "0" unselects it. Current state can be also read.
Documentation/ABI/testing/sysfs-class-leds-gt683r +5 -3
@@ -7,9 +7,11 @@ Description: of one LED will update the mode of its two sibling devices as well. Possible values are: - 0 - normal - 1 - audio - 2 - breathing + == ========= + 0 normal + 1 audio + 2 breathing + == ========= Normal: LEDs are fully on when enabled Audio: LEDs brightness depends on sound level
Documentation/ABI/testing/sysfs-class-net +42 -19
110 lines not on this page · raw message
Documentation/ABI/testing/sysfs-class-net-cdc_ncm +3 -3
@@ -91,9 +91,9 @@ Date: May 2014 KernelVersion: 3.16 Contact: Bjørn Mork <[email protected]> Description: - Bit 0: 16-bit NTB supported (set to 1) - Bit 1: 32-bit NTB supported - Bits 2 – 15: reserved (reset to zero; must be ignored by host) + - Bit 0: 16-bit NTB supported (set to 1) + - Bit 1: 32-bit NTB supported + - Bits 2 – 15: reserved (reset to zero; must be ignored by host) What: /sys/class/net/<iface>/cdc_ncm/dwNtbInMaxSize Date: May 2014
Documentation/ABI/testing/sysfs-class-net-phydev +2 -0
@@ -35,7 +35,9 @@ Description: Ethernet driver during bus enumeration, encoded in string. This interface mode is used to configure the Ethernet MAC with the appropriate mode for its data lines to the PHY hardware. + Possible values are: + <empty> (not available), mii, gmii, sgmii, tbi, rev-mii, rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
Documentation/ABI/testing/sysfs-class-pktcdvd +20 -16
@@ -11,15 +11,17 @@ KernelVersion: 2.6.20 Contact: Thomas Maier <[email protected]> Description: - add: (WO) Write a block device id (major:minor) to + ========== ============================================== + add (WO) Write a block device id (major:minor) to create a new pktcdvd device and map it to the block device. - remove: (WO) Write the pktcdvd device id (major:minor) + remove (WO) Write the pktcdvd device id (major:minor) to remove the pktcdvd device. - device_map: (RO) Shows the device mapping in format: + device_map (RO) Shows the device mapping in format: pktcdvd[0-7] <pktdevid> <blkdevid> + ========== ============================================== What: /sys/class/pktcdvd/pktcdvd[0-7]/dev
@@ -65,29 +67,31 @@ Date: Oct. 2006 KernelVersion: 2.6.20 Contact: Thomas Maier <[email protected]> Description: - size: (RO) Contains the size of the bio write queue. + ============== ================================================ + size (RO) Contains the size of the bio write queue. - congestion_off: (RW) If bio write queue size is below this mark, + congestion_off (RW) If bio write queue size is below this mark, accept new bio requests from the block layer. - congestion_on: (RW) If bio write queue size is higher as this + congestion_on (RW) If bio write queue size is higher as this mark, do no longer accept bio write requests from the block layer and wait till the pktcdvd device has processed enough bio's so that bio write queue size is below congestion off mark. A value of <= 0 disables congestion control. + ============== ================================================ Example: -------- -To use the pktcdvd sysfs interface directly, you can do: +To use the pktcdvd sysfs interface directly, you can do:: -# create a new pktcdvd device mapped to /dev/hdc -echo "22:0" >/sys/class/pktcdvd/add -cat /sys/class/pktcdvd/device_map -# assuming device pktcdvd0 was created, look at stat's -cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written -# print the device id of the mapped block device -fgrep pktcdvd0 /sys/class/pktcdvd/device_map -# remove device, using pktcdvd0 device id 253:0 -echo "253:0" >/sys/class/pktcdvd/remove + # create a new pktcdvd device mapped to /dev/hdc + echo "22:0" >/sys/class/pktcdvd/add + cat /sys/class/pktcdvd/device_map + # assuming device pktcdvd0 was created, look at stat's + cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written + # print the device id of the mapped block device + fgrep pktcdvd0 /sys/class/pktcdvd/device_map + # remove device, using pktcdvd0 device id 253:0 + echo "253:0" >/sys/class/pktcdvd/remove
Documentation/ABI/testing/sysfs-class-power +11 -1
@@ -43,7 +43,9 @@ Date: May 2007 Contact: [email protected] Description: Fine grain representation of battery capacity. + Access: Read + Valid values: 0 - 100 (percent) What: /sys/class/power_supply/<supply_name>/capacity_alert_max
@@ -58,6 +60,7 @@ Description: low). Access: Read, Write + Valid values: 0 - 100 (percent) What: /sys/class/power_supply/<supply_name>/capacity_alert_min
@@ -88,6 +91,7 @@ Description: completely useless. Access: Read + Valid values: 0 - 100 (percent) What: /sys/class/power_supply/<supply_name>/capacity_level
@@ -111,6 +115,7 @@ Description: which they average readings to smooth out the reported value. Access: Read + Valid values: Represented in microamps. Negative values are used for discharging batteries, positive values for charging batteries.
@@ -131,6 +136,7 @@ Description: This value is not averaged/smoothed. Access: Read + Valid values: Represented in microamps. Negative values are used for discharging batteries, positive values for charging batteries.
@@ -383,7 +389,7 @@ Description: **USB Properties** -What: /sys/class/power_supply/<supply_name>/current_avg +What: /sys/class/power_supply/<supply_name>/current_avg Date: May 2007 Contact: [email protected] Description:
@@ -449,6 +455,7 @@ Description: solved using power limit use input_voltage_limit. Access: Read, Write + Valid values: Represented in microvolts What: /sys/class/power_supply/<supply_name>/input_power_limit
@@ -462,6 +469,7 @@ Description: limit only for problems that can be solved using power limit. Access: Read, Write + Valid values: Represented in microwatts What: /sys/class/power_supply/<supply_name>/online,
@@ -747,6 +755,7 @@ Description: manufactured. Access: Read + Valid values: Reported as integer What: /sys/class/power_supply/<supply_name>/manufacture_month
@@ -756,6 +765,7 @@ Description: Reports the month when the device has been manufactured. Access: Read + Valid values: 1-12 What: /sys/class/power_supply/<supply_name>/manufacture_day
Documentation/ABI/testing/sysfs-class-power-mp2629 +1 -0
@@ -5,4 +5,5 @@ Description: Represents a battery impedance compensation to accelerate charging. Access: Read, Write + Valid values: Represented in milli-ohms. Valid range is [0, 140].
Documentation/ABI/testing/sysfs-class-power-twl4030 +2 -2
@@ -6,9 +6,9 @@ Description: Possible values are: ============= =========================================== - "auto" draw power as appropriate for detected + "auto" draw power as appropriate for detected power source and battery status. - "off" do not draw any power. + "off" do not draw any power. "continuous" activate mode described as "linear" in TWL data sheets. This uses whatever current is available and doesn't switch off
Documentation/ABI/testing/sysfs-class-rapidio +25 -21
69 lines not on this page · raw message
Documentation/ABI/testing/sysfs-class-regulator +18 -18
@@ -35,13 +35,13 @@ Description: This will be one of the following strings: - off - on - error - fast - normal - idle - standby + - off + - on + - error + - fast + - normal + - idle + - standby "off" means the regulator is not supplying power to the system.
@@ -74,9 +74,9 @@ Description: This will be one of the following strings: - 'voltage' - 'current' - 'unknown' + - 'voltage' + - 'current' + - 'unknown' 'voltage' means the regulator output voltage can be controlled by software.
@@ -129,11 +129,11 @@ Description: The opmode value can be one of the following strings: - 'fast' - 'normal' - 'idle' - 'standby' - 'unknown' + - 'fast' + - 'normal' + - 'idle' + - 'standby' + - 'unknown' The modes are described in include/linux/regulator/consumer.h
@@ -360,9 +360,9 @@ Description: This will be one of the following strings: - 'enabled' - 'disabled' - 'unknown' + - 'enabled' + - 'disabled' + - 'unknown' 'enabled' means the regulator is in bypass mode.
Documentation/ABI/testing/sysfs-class-remoteproc +7 -7
@@ -16,11 +16,11 @@ Description: Remote processor state Reports the state of the remote processor, which will be one of: - "offline" - "suspended" - "running" - "crashed" - "invalid" + - "offline" + - "suspended" + - "running" + - "crashed" + - "invalid" "offline" means the remote processor is powered off.
@@ -38,8 +38,8 @@ Description: Remote processor state Writing this file controls the state of the remote processor. The following states can be written: - "start" - "stop" + - "start" + - "stop" Writing "start" will attempt to start the processor running the firmware indicated by, or written to,
Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration +1 -0
@@ -7,6 +7,7 @@ Description: Attribute for calibrating ST-Ericsson AB8500 Real Time Clock calibrate the AB8500.s 32KHz Real Time Clock. Every 60 seconds the AB8500 will correct the RTC's value by adding to it the value of this attribute. + The range of the attribute is -127 to +127 in units of 30.5 micro-seconds (half-parts-per-million of the 32KHz clock) Users: The /vendor/st-ericsson/base_utilities/core/rtc_calibration
Documentation/ABI/testing/sysfs-class-uwb_rc +8 -5
@@ -66,11 +66,14 @@ Description: <channel> <type> [<bpst offset>] to start (or stop) scanning on a channel. <type> is one of: - 0 - scan - 1 - scan outside BP - 2 - scan while inactive - 3 - scanning disabled - 4 - scan (with start time of <bpst offset>) + + == ======================================= + 0 scan + 1 scan outside BP + 2 scan while inactive + 3 scanning disabled + 4 scan (with start time of <bpst offset>) + == ======================================= What: /sys/class/uwb_rc/uwbN/mac_address Date: July 2008
Documentation/ABI/testing/sysfs-class-watchdog +5 -2
@@ -91,10 +91,13 @@ Description: h/w strapping (for WDT2 only). At alternate flash the 'access_cs0' sysfs node provides: - ast2400: a way to get access to the primary SPI flash + + ast2400: + a way to get access to the primary SPI flash chip at CS0 after booting from the alternate chip at CS1. - ast2500: a way to restore the normal address mapping + ast2500: + a way to restore the normal address mapping from (CS0->CS1, CS1->CS0) to (CS0->CS0, CS1->CS1).
Documentation/ABI/testing/sysfs-dev +4 -3
@@ -9,9 +9,10 @@ Description: The /sys/dev tree provides a method to look up the sysfs the form "<major>:<minor>". These links point to the corresponding sysfs path for the given device. - Example: - $ readlink /sys/dev/block/8:32 - ../../block/sdc + Example:: + + $ readlink /sys/dev/block/8:32 + ../../block/sdc Entries in /sys/dev/char and /sys/dev/block will be dynamically created and destroyed as devices enter and
Documentation/ABI/testing/sysfs-devices-mapping +21 -20
47 lines not on this page · raw message
Documentation/ABI/testing/sysfs-devices-memory +10 -5
@@ -47,16 +47,19 @@ Description: online/offline state of the memory section. When written, root can toggle the the online/offline state of a removable memory section (see removable file description above) - using the following commands. - # echo online > /sys/devices/system/memory/memoryX/state - # echo offline > /sys/devices/system/memory/memoryX/state + using the following commands:: + + # echo online > /sys/devices/system/memory/memoryX/state + # echo offline > /sys/devices/system/memory/memoryX/state For example, if /sys/devices/system/memory/memory22/removable contains a value of 1 and /sys/devices/system/memory/memory22/state contains the string "online" the following command can be executed by - by root to offline that section. - # echo offline > /sys/devices/system/memory/memory22/state + by root to offline that section:: + + # echo offline > /sys/devices/system/memory/memory22/state + Users: hotplug memory remove tools http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
@@ -78,6 +81,7 @@ Description: For example, the following symbolic link is created for memory section 9 on node0: + /sys/devices/system/memory/memory9/node0 -> ../../node/node0
@@ -90,4 +94,5 @@ Description: points to the corresponding /sys/devices/system/memory/memoryY memory section directory. For example, the following symbolic link is created for memory section 9 on node0. + /sys/devices/system/node/node0/memory9 -> ../../memory/memory9
Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget +6 -4
@@ -3,8 +3,9 @@ Date: April 2010 Contact: Fabien Chouteau <[email protected]> Description: Show the suspend state of an USB composite gadget. - 1 -> suspended - 0 -> resumed + + - 1 -> suspended + - 0 -> resumed (_UDC_ is the name of the USB Device Controller driver)
@@ -17,5 +18,6 @@ Description: Storage mode. Possible values are: - 1 -> ignore the FUA flag - 0 -> obey the FUA flag + + - 1 -> ignore the FUA flag + - 0 -> obey the FUA flag
Documentation/ABI/testing/sysfs-devices-platform-ipmi +28 -24
104 lines not on this page · raw message
Documentation/ABI/testing/sysfs-devices-system-cpu +2 -2
@@ -169,7 +169,7 @@ Description: observed CPU idle duration was too short for it (a count). - below: (RO) Number of times this state was entered, but the + below: (RO) Number of times this state was entered, but the observed CPU idle duration was too long for it (a count). ======== ==== =================================================
@@ -601,7 +601,7 @@ Description: Secure Virtual Machine Facility in POWER9 and newer processors. i.e., it is a Secure Virtual Machine. -What: /sys/devices/system/cpu/cpuX/purr +What: /sys/devices/system/cpu/cpuX/purr Date: Apr 2005 Contact: Linux for PowerPC mailing list <[email protected]> Description: PURR ticks for this CPU since the system boot.
Documentation/ABI/testing/sysfs-driver-hid-lenovo +10 -0
@@ -3,14 +3,18 @@ Date: July 2011 Contact: [email protected] Description: This controls if mouse clicks should be generated if the trackpoint is quickly pressed. How fast this press has to be is being controlled by press_speed. + Values are 0 or 1. + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/dragging Date: July 2011 Contact: [email protected] Description: If this setting is enabled, it is possible to do dragging by pressing the trackpoint. This requires press_to_select to be enabled. + Values are 0 or 1. + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/release_to_select
@@ -25,7 +29,9 @@ Date: July 2011 Contact: [email protected] Description: This setting controls if the mouse click events generated by pressing the trackpoint (if press_to_select is enabled) generate a left or right mouse button click. + Values are 0 or 1. + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/sensitivity
@@ -39,12 +45,16 @@ What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid- Date: July 2011 Contact: [email protected] Description: This setting controls how fast the trackpoint needs to be pressed to generate a mouse click if press_to_select is enabled. + Values are decimal integers from 1 (slowest) to 255 (fastest). + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fn_lock Date: July 2014 Contact: [email protected] Description: This setting controls whether Fn Lock is enabled on the keyboard (i.e. if F1 is Mute or F1) + Values are 0 or 1 + Applies to ThinkPad Compact (USB|Bluetooth) Keyboard with TrackPoint.
Documentation/ABI/testing/sysfs-driver-hid-ntrig +8 -5
@@ -29,12 +29,13 @@ Contact: [email protected] Description: Threholds to override activation slack. - activation_width: (RW) Width threshold to immediately + ================= ===================================== + activation_width (RW) Width threshold to immediately start processing touch events. - activation_height: (RW) Height threshold to immediately + activation_height (RW) Height threshold to immediately start processing touch events. - + ================= ===================================== What: /sys/bus/hid/drivers/ntrig/<dev>/min_width What: /sys/bus/hid/drivers/ntrig/<dev>/min_height
@@ -44,11 +45,13 @@ Contact: [email protected] Description: Minimum size contact accepted. - min_width: (RW) Minimum touch contact width to decide + ========== =========================================== + min_width (RW) Minimum touch contact width to decide activation and activity. - min_height: (RW) Minimum touch contact height to decide + min_height (RW) Minimum touch contact height to decide activation and activity. + ========== =========================================== What: /sys/bus/hid/drivers/ntrig/<dev>/sensor_physical_width
Documentation/ABI/testing/sysfs-driver-hid-roccat-kone +19 -0
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-driver-hid-wiimote +1 -0
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-driver-input-exc3000 +2 -0
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-driver-jz4780-efuse +5 -1
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-driver-pciback +4 -2
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-driver-ufs +181 -47
228 lines not on this page · raw message
Documentation/ABI/testing/sysfs-driver-w1_ds28e17 +3 -0
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-firmware-acpi +8 -8
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-firmware-efi-esrt +17 -11
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-firmware-efi-runtime-map +8 -6
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg +11 -9
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-firmware-sfi +3 -3
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-firmware-sgi_uv +3 -3
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-fs-f2fs +34 -14
48 lines not on this page · raw message
Documentation/ABI/testing/sysfs-kernel-mm-ksm +3 -2
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-kernel-slab +3 -0
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-module +10 -7
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-platform-dell-laptop +7 -3
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-platform-dell-smbios +2 -2
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl +2 -2
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-platform-kim +1 -0
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2 +6 -4
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-platform-renesas_usb3 +6 -4
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-profiling +1 -1
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/sysfs-wusb_cbaf +2 -1
Lines of this file are not shown. View the raw message.
Documentation/ABI/testing/usb-charger-uevent +45 -37
82 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.26.2
Part of the diff is not shown here. View the raw message.
RE: [PATCH v2 31/39] docs: ABI: cleanup several ABI documents
Quoted 6 lines · Mauro Carvalho Chehab
There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result.
Address them, in order to provide a clean output.
Quoted 7 lines
Reviewed-by Tom Rix <[email protected]> # for fpga-managerSigned-off-by Mauro Carvalho Chehab <[email protected]>---
sysfs-bus-pci-devices-catpt changes LGTM, thanks.
Regards,
Czarek
Quoted 128 lines
Documentation/ABI/obsolete/sysfs-class-dax | 8 +- .../ABI/obsolete/sysfs-driver-hid-roccat-pyra | 3 + Documentation/ABI/removed/devfs | 1 + Documentation/ABI/removed/raw1394 | 1 + Documentation/ABI/removed/sysfs-class-rfkill | 2 +- Documentation/ABI/removed/video1394 | 1 + Documentation/ABI/stable/firewire-cdev | 63 ++--- Documentation/ABI/stable/sysfs-acpi-pmprofile | 4 +- Documentation/ABI/stable/sysfs-bus-w1 | 1 + Documentation/ABI/stable/sysfs-class-tpm | 4 +- Documentation/ABI/stable/sysfs-driver-speakup | 4 + Documentation/ABI/testing/configfs-most | 135 +++++++---- .../ABI/testing/configfs-usb-gadget-ecm | 12 +- .../ABI/testing/configfs-usb-gadget-eem | 10 +- .../ABI/testing/configfs-usb-gadget-loopback | 6 +- .../testing/configfs-usb-gadget-mass-storage | 18 +- .../ABI/testing/configfs-usb-gadget-midi | 14 +- .../ABI/testing/configfs-usb-gadget-printer | 6 +- .../testing/configfs-usb-gadget-sourcesink | 18 +- .../ABI/testing/configfs-usb-gadget-subset | 10 +- .../ABI/testing/configfs-usb-gadget-uac2 | 14 +- .../ABI/testing/configfs-usb-gadget-uvc | 2 +- .../ABI/testing/debugfs-cec-error-inj | 2 +- .../ABI/testing/debugfs-driver-habanalabs | 12 +- .../ABI/testing/debugfs-pfo-nx-crypto | 28 +-- Documentation/ABI/testing/debugfs-pktcdvd | 2 +- .../ABI/testing/debugfs-turris-mox-rwtm | 10 +- Documentation/ABI/testing/debugfs-wilco-ec | 21 +- Documentation/ABI/testing/dell-smbios-wmi | 32 +-- Documentation/ABI/testing/gpio-cdev | 13 +- Documentation/ABI/testing/procfs-diskstats | 6 +- Documentation/ABI/testing/procfs-smaps_rollup | 48 ++-- Documentation/ABI/testing/pstore | 19 +- Documentation/ABI/testing/sysfs-block-rnbd | 4 +- Documentation/ABI/testing/sysfs-bus-acpi | 1 + .../testing/sysfs-bus-coresight-devices-etb10 | 5 +- Documentation/ABI/testing/sysfs-bus-css | 3 + Documentation/ABI/testing/sysfs-bus-dfl | 2 + .../sysfs-bus-event_source-devices-hv_24x7 | 6 +- .../sysfs-bus-event_source-devices-hv_gpci | 7 +- Documentation/ABI/testing/sysfs-bus-fcoe | 68 ++++-- Documentation/ABI/testing/sysfs-bus-fsl-mc | 12 +- .../ABI/testing/sysfs-bus-i2c-devices-fsa9480 | 26 +- Documentation/ABI/testing/sysfs-bus-i3c | 2 + Documentation/ABI/testing/sysfs-bus-iio | 19 +- .../ABI/testing/sysfs-bus-iio-adc-hi8435 | 5 + .../ABI/testing/sysfs-bus-iio-adc-stm32 | 3 + .../ABI/testing/sysfs-bus-iio-distance-srf08 | 7 +- .../testing/sysfs-bus-iio-frequency-ad9523 | 2 + .../testing/sysfs-bus-iio-frequency-adf4371 | 10 +- .../ABI/testing/sysfs-bus-iio-health-afe440x | 12 +- .../ABI/testing/sysfs-bus-iio-light-isl29018 | 6 +- .../testing/sysfs-bus-intel_th-devices-gth | 11 +- Documentation/ABI/testing/sysfs-bus-papr-pmem | 23 +- Documentation/ABI/testing/sysfs-bus-pci | 22 +- .../ABI/testing/sysfs-bus-pci-devices-catpt | 1 + .../testing/sysfs-bus-pci-drivers-ehci_hcd | 4 +- Documentation/ABI/testing/sysfs-bus-rbd | 37 ++- Documentation/ABI/testing/sysfs-bus-siox | 3 + .../ABI/testing/sysfs-bus-thunderbolt | 18 +- Documentation/ABI/testing/sysfs-bus-usb | 2 + .../sysfs-class-backlight-driver-lm3533 | 26 +- Documentation/ABI/testing/sysfs-class-bdi | 1 - .../ABI/testing/sysfs-class-chromeos | 15 +- Documentation/ABI/testing/sysfs-class-cxl | 8 +- Documentation/ABI/testing/sysfs-class-devlink | 30 ++- Documentation/ABI/testing/sysfs-class-extcon | 34 +-- .../ABI/testing/sysfs-class-fpga-manager | 5 +- Documentation/ABI/testing/sysfs-class-gnss | 2 + Documentation/ABI/testing/sysfs-class-led | 1 + .../testing/sysfs-class-led-driver-el15203000 | 30 +-- .../ABI/testing/sysfs-class-led-driver-lm3533 | 44 ++-- .../ABI/testing/sysfs-class-led-flash | 27 ++- .../testing/sysfs-class-led-trigger-netdev | 7 + .../testing/sysfs-class-led-trigger-usbport | 1 + .../ABI/testing/sysfs-class-leds-gt683r | 8 +- Documentation/ABI/testing/sysfs-class-net | 61 +++-- .../ABI/testing/sysfs-class-net-cdc_ncm | 6 +- .../ABI/testing/sysfs-class-net-phydev | 2 + Documentation/ABI/testing/sysfs-class-pktcdvd | 36 +-- Documentation/ABI/testing/sysfs-class-power | 12 +- .../ABI/testing/sysfs-class-power-mp2629 | 1 + .../ABI/testing/sysfs-class-power-twl4030 | 4 +- Documentation/ABI/testing/sysfs-class-rapidio | 46 ++-- .../ABI/testing/sysfs-class-regulator | 36 +-- .../ABI/testing/sysfs-class-remoteproc | 14 +- ...ysfs-class-rtc-rtc0-device-rtc_calibration | 1 + Documentation/ABI/testing/sysfs-class-uwb_rc | 13 +- .../ABI/testing/sysfs-class-watchdog | 7 +- Documentation/ABI/testing/sysfs-dev | 7 +- .../ABI/testing/sysfs-devices-mapping | 41 ++-- .../ABI/testing/sysfs-devices-memory | 15 +- .../sysfs-devices-platform-_UDC_-gadget | 10 +- .../ABI/testing/sysfs-devices-platform-ipmi | 52 ++-- .../ABI/testing/sysfs-devices-system-cpu | 4 +- .../ABI/testing/sysfs-driver-hid-lenovo | 10 + .../ABI/testing/sysfs-driver-hid-ntrig | 13 +- .../ABI/testing/sysfs-driver-hid-roccat-kone | 19 ++ .../ABI/testing/sysfs-driver-hid-wiimote | 1 + .../ABI/testing/sysfs-driver-input-exc3000 | 2 + .../ABI/testing/sysfs-driver-jz4780-efuse | 6 +- .../ABI/testing/sysfs-driver-pciback | 6 +- Documentation/ABI/testing/sysfs-driver-ufs | 228 ++++++++++++++---- .../ABI/testing/sysfs-driver-w1_ds28e17 | 3 + Documentation/ABI/testing/sysfs-firmware-acpi | 16 +- .../ABI/testing/sysfs-firmware-efi-esrt | 28 ++- .../testing/sysfs-firmware-efi-runtime-map | 14 +- .../ABI/testing/sysfs-firmware-qemu_fw_cfg | 20 +- Documentation/ABI/testing/sysfs-firmware-sfi | 6 +- .../ABI/testing/sysfs-firmware-sgi_uv | 6 +- Documentation/ABI/testing/sysfs-fs-f2fs | 48 ++-- Documentation/ABI/testing/sysfs-kernel-mm-ksm | 5 +- Documentation/ABI/testing/sysfs-kernel-slab | 3 + Documentation/ABI/testing/sysfs-module | 17 +- .../ABI/testing/sysfs-platform-dell-laptop | 10 +- .../ABI/testing/sysfs-platform-dell-smbios | 4 +- .../testing/sysfs-platform-i2c-demux-pinctrl | 4 +- Documentation/ABI/testing/sysfs-platform-kim | 1 + .../testing/sysfs-platform-phy-rcar-gen3-usb2 | 10 +- .../ABI/testing/sysfs-platform-renesas_usb3 | 10 +- Documentation/ABI/testing/sysfs-power | 21 +- Documentation/ABI/testing/sysfs-profiling | 2 +- Documentation/ABI/testing/sysfs-wusb_cbaf | 3 +- Documentation/ABI/testing/usb-charger-uevent | 82 ++++--- Documentation/ABI/testing/usb-uevent | 32 +-- scripts/get_abi.pl | 2 - 126 files changed, 1323 insertions(+), 767 deletions(-)
Re: [PATCH v2 31/39] docs: ABI: cleanup several ABI documents
In reply to Mauro Carvalho ChehabQuoted 15 lines · Mauro Carvalho Chehab
There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result.
Address them, in order to provide a clean output.
Reviewed-by Tom Rix <[email protected]> # for fpga-managerSigned-off-by Mauro Carvalho Chehab <[email protected]>
Quoted 1 line
.../testing/sysfs-bus-coresight-devices-etb10 | 5 +-
For the above,
Re: [PATCH v2 31/39] docs: ABI: cleanup several ABI documents
In reply to Mauro Carvalho ChehabQuoted 14 lines · Mauro Carvalho Chehab
There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result.
Address them, in order to provide a clean output.
Reviewed-by Tom Rix <[email protected]> # for fpga-managerSigned-off-by Mauro Carvalho Chehab <[email protected]>
Quoted 3 lines
[...]
Documentation/ABI/testing/sysfs-bus-rbd | 37 ++-
Thanks,
Ilya
_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
Re: [PATCH v2 31/39] docs: ABI: cleanup several ABI documents
In reply to Mauro Carvalho ChehabQuoted 13 lines · Mauro Carvalho Chehab
There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result.
Address them, in order to provide a clean output.
Reviewed-by Tom Rix <[email protected]> # for fpga-managerSigned-off-by Mauro Carvalho Chehab <[email protected]>
Quoted 3 lines
---
.../testing/sysfs-bus-coresight-devices-etb10 | 5 +-
For the CoreSight part:
RE: [PATCH v2 31/39] docs: ABI: cleanup several ABI documents
In reply to Mauro Carvalho ChehabRe: [PATCH v2 31/39] docs: ABI: cleanup several ABI documents
In reply to Mauro Carvalho ChehabQuoted 6 lines · Mauro Carvalho Chehab
There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result.
Address them, in order to provide a clean output.
...
Quoted 1 line
.../ABI/testing/sysfs-driver-input-exc3000 | 2 +
Thanks.
Signature · 1 line
Dmitry
PATCH v2 32/39 docs: ABI: change read/write attributes
In reply to Mauro Carvalho ChehabUnfortunately, (R) and (W) are valid markups for enumerated lists, as described at:
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#enumerated-lists
So, we ned to replace them by:
(R) -> (Read) (W) -> (Write)
As otherwise, (R) will be displayed as R., with is not what it is desired.
There's no need to touch (RO) and (RW).
--- Documentation/ABI/testing/debugfs-moxtet | 2 +- .../ABI/testing/debugfs-turris-mox-rwtm | 15 ++-- .../testing/sysfs-bus-coresight-devices-cti | 60 +++++++-------- .../testing/sysfs-bus-coresight-devices-etb10 | 16 ++-- .../testing/sysfs-bus-coresight-devices-etm3x | 10 +-- .../testing/sysfs-bus-coresight-devices-etm4x | 76 +++++++++---------- .../testing/sysfs-bus-coresight-devices-stm | 2 +- .../testing/sysfs-bus-coresight-devices-tmc | 20 ++--- .../ABI/testing/sysfs-bus-moxtet-devices | 6 +- .../testing/sysfs-firmware-turris-mox-rwtm | 10 +-- 10 files changed, 109 insertions(+), 108 deletions(-)
Documentation/ABI/testing/debugfs-moxtet +1 -1
@@ -2,7 +2,7 @@ What: /sys/kernel/debug/moxtet/input Date: March 2019 KernelVersion: 5.3 Contact: Marek Behún <[email protected]> -Description: (R) Read input from the shift registers, in hexadecimal. +Description: (Read) Read input from the shift registers, in hexadecimal. Returns N+1 bytes, where N is the number of Moxtet connected modules. The first byte is from the CPU board itself.
Documentation/ABI/testing/debugfs-turris-mox-rwtm +8 -7
@@ -4,10 +4,11 @@ KernelVersion: 5.8 Contact: Marek Behún <[email protected]> Description: - === =========================================================== - (W) Message to sign with the ECDSA private key stored in - device's OTP. The message must be exactly 64 bytes (since - this is intended for SHA-512 hashes). - (R) The resulting signature, 136 bytes. This contains the R and - S values of the ECDSA signature, both in big-endian format. - === =========================================================== + ======= =========================================================== + (Write) Message to sign with the ECDSA private key stored in + device's OTP. The message must be exactly 64 bytes + (since this is intended for SHA-512 hashes). + (Read) The resulting signature, 136 bytes. This contains the + R and S values of the ECDSA signature, both in + big-endian format. + ======= ===========================================================
Documentation/ABI/testing/sysfs-bus-coresight-devices-cti +30 -30
217 lines not on this page · raw message
Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 +8 -8
@@ -23,21 +23,21 @@ What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/rdp Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Defines the depth, in words, of the trace RAM in powers of +Description: (Read) Defines the depth, in words, of the trace RAM in powers of 2. The value is read directly from HW register RDP, 0x004. What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/sts Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Shows the value held by the ETB status register. The value +Description: (Read) Shows the value held by the ETB status register. The value is read directly from HW register STS, 0x00C. What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/rrp Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Shows the value held by the ETB RAM Read Pointer register +Description: (Read) Shows the value held by the ETB RAM Read Pointer register that is used to read entries from the Trace RAM over the APB interface. The value is read directly from HW register RRP, 0x014.
@@ -46,7 +46,7 @@ What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/rwp Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Shows the value held by the ETB RAM Write Pointer register +Description: (Read) Shows the value held by the ETB RAM Write Pointer register that is used to sets the write pointer to write entries from the CoreSight bus into the Trace RAM. The value is read directly from HW register RWP, 0x018.
@@ -55,21 +55,21 @@ What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/trg Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Similar to "trigger_cntr" above except that this value is +Description: (Read) Similar to "trigger_cntr" above except that this value is read directly from HW register TRG, 0x01C. What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/ctl Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Shows the value held by the ETB Control register. The value +Description: (Read) Shows the value held by the ETB Control register. The value is read directly from HW register CTL, 0x020. What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffsr Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Shows the value held by the ETB Formatter and Flush Status +Description: (Read) Shows the value held by the ETB Formatter and Flush Status register. The value is read directly from HW register FFSR, 0x300.
@@ -77,6 +77,6 @@ What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffcr Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Shows the value held by the ETB Formatter and Flush Control +Description: (Read) Shows the value held by the ETB Formatter and Flush Control register. The value is read directly from HW register FFCR, 0x304.
Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x +5 -5
@@ -146,28 +146,28 @@ What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_addr_cmp Date: November 2014 KernelVersion: 3.19 Contact: Mathieu Poirier <[email protected]> -Description: (R) Provides the number of address comparators pairs accessible +Description: (Read) Provides the number of address comparators pairs accessible on a trace unit, as specified by bit 3:0 of register ETMCCR. What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_cntr Date: November 2014 KernelVersion: 3.19 Contact: Mathieu Poirier <[email protected]> -Description: (R) Provides the number of counters accessible on a trace unit, +Description: (Read) Provides the number of counters accessible on a trace unit, as specified by bit 15:13 of register ETMCCR. What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_ctxid_cmp Date: November 2014 KernelVersion: 3.19 Contact: Mathieu Poirier <[email protected]> -Description: (R) Provides the number of context ID comparator available on a +Description: (Read) Provides the number of context ID comparator available on a trace unit, as specified by bit 25:24 of register ETMCCR. What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/reset Date: November 2014 KernelVersion: 3.19 Contact: Mathieu Poirier <[email protected]> -Description: (W) Cancels all configuration on a trace unit and set it back +Description: (Write) Cancels all configuration on a trace unit and set it back to its boot configuration. What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/seq_12_event
@@ -216,7 +216,7 @@ What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/curr_seq_state Date: November 2014 KernelVersion: 3.19 Contact: Mathieu Poirier <[email protected]> -Description: (R) Holds the current state of the sequencer. +Description: (Read) Holds the current state of the sequencer. What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/sync_freq Date: November 2014
Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +38 -38
300 lines not on this page · raw message
Documentation/ABI/testing/sysfs-bus-coresight-devices-stm +1 -1
@@ -42,7 +42,7 @@ What: /sys/bus/coresight/devices/<memory_map>.stm/status Date: April 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) List various control and status registers. The specific +Description: (Read) List various control and status registers. The specific layout and content is driver specific. What: /sys/bus/coresight/devices/<memory_map>.stm/traceid
Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc +10 -10
@@ -11,21 +11,21 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rsz Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Defines the size, in 32-bit words, of the local RAM buffer. +Description: (Read) Defines the size, in 32-bit words, of the local RAM buffer. The value is read directly from HW register RSZ, 0x004. What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/sts Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Shows the value held by the TMC status register. The value +Description: (Read) Shows the value held by the TMC status register. The value is read directly from HW register STS, 0x00C. What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rrp Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Shows the value held by the TMC RAM Read Pointer register +Description: (Read) Shows the value held by the TMC RAM Read Pointer register that is used to read entries from the Trace RAM over the APB interface. The value is read directly from HW register RRP, 0x014.
@@ -34,7 +34,7 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rwp Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Shows the value held by the TMC RAM Write Pointer register +Description: (Read) Shows the value held by the TMC RAM Write Pointer register that is used to sets the write pointer to write entries from the CoreSight bus into the Trace RAM. The value is read directly from HW register RWP, 0x018.
@@ -43,21 +43,21 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/trg Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Similar to "trigger_cntr" above except that this value is +Description: (Read) Similar to "trigger_cntr" above except that this value is read directly from HW register TRG, 0x01C. What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ctl Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Shows the value held by the TMC Control register. The value +Description: (Read) Shows the value held by the TMC Control register. The value is read directly from HW register CTL, 0x020. What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffsr Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Shows the value held by the TMC Formatter and Flush Status +Description: (Read) Shows the value held by the TMC Formatter and Flush Status register. The value is read directly from HW register FFSR, 0x300.
@@ -65,7 +65,7 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffcr Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Shows the value held by the TMC Formatter and Flush Control +Description: (Read) Shows the value held by the TMC Formatter and Flush Control register. The value is read directly from HW register FFCR, 0x304.
@@ -73,7 +73,7 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/mode Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Shows the value held by the TMC Mode register, which +Description: (Read) Shows the value held by the TMC Mode register, which indicate the mode the device has been configured to enact. The The value is read directly from the MODE register, 0x028.
@@ -81,7 +81,7 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/devid Date: March 2016 KernelVersion: 4.7 Contact: Mathieu Poirier <[email protected]> -Description: (R) Indicates the capabilities of the Coresight TMC. +Description: (Read) Indicates the capabilities of the Coresight TMC. The value is read directly from the DEVID register, 0xFC8, What: /sys/bus/coresight/devices/<memory_map>.tmc/buffer_size
Documentation/ABI/testing/sysfs-bus-moxtet-devices +3 -3
@@ -2,16 +2,16 @@ What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_description Date: March 2019 KernelVersion: 5.3 Contact: Marek Behún <[email protected]> -Description: (R) Moxtet module description. Format: string +Description: (Read) Moxtet module description. Format: string What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_id Date: March 2019 KernelVersion: 5.3 Contact: Marek Behún <[email protected]> -Description: (R) Moxtet module ID. Format: %x +Description: (Read) Moxtet module ID. Format: %x What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_name Date: March 2019 KernelVersion: 5.3 Contact: Marek Behún <[email protected]> -Description: (R) Moxtet module name. Format: string +Description: (Read) Moxtet module name. Format: string
Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm +5 -5
@@ -2,21 +2,21 @@ What: /sys/firmware/turris-mox-rwtm/board_version Date: August 2019 KernelVersion: 5.4 Contact: Marek Behún <[email protected]> -Description: (R) Board version burned into eFuses of this Turris Mox board. +Description: (Read) Board version burned into eFuses of this Turris Mox board. Format: %i What: /sys/firmware/turris-mox-rwtm/mac_address* Date: August 2019 KernelVersion: 5.4 Contact: Marek Behún <[email protected]> -Description: (R) MAC addresses burned into eFuses of this Turris Mox board. +Description: (Read) MAC addresses burned into eFuses of this Turris Mox board. Format: %pM What: /sys/firmware/turris-mox-rwtm/pubkey Date: August 2019 KernelVersion: 5.4 Contact: Marek Behún <[email protected]> -Description: (R) ECDSA public key (in pubkey hex compressed form) computed +Description: (Read) ECDSA public key (in pubkey hex compressed form) computed as pair to the ECDSA private key burned into eFuses of this Turris Mox Board. Format: string
@@ -25,7 +25,7 @@ What: /sys/firmware/turris-mox-rwtm/ram_size Date: August 2019 KernelVersion: 5.4 Contact: Marek Behún <[email protected]> -Description: (R) RAM size in MiB of this Turris Mox board as was detected +Description: (Read) RAM size in MiB of this Turris Mox board as was detected during manufacturing and burned into eFuses. Can be 512 or 1024. Format: %i
@@ -33,5 +33,5 @@ What: /sys/firmware/turris-mox-rwtm/serial_number Date: August 2019 KernelVersion: 5.4 Contact: Marek Behún <[email protected]> -Description: (R) Serial number burned into eFuses of this Turris Mox device. +Description: (Read) Serial number burned into eFuses of this Turris Mox device. Format: %016X
Signature · 1 line
2.26.2
PATCH v2 33/39 docs: ABI: stable: remove a duplicated documentation
In reply to Mauro Carvalho ChehabPerhaps due to a wrong cut-and-paste, this entry:
What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/cpu
was added twice by the same patch, one following the other.
Remove the duplication.
--- Documentation/ABI/stable/sysfs-bus-vmbus | 7 ------- 1 file changed, 7 deletions(-)
Documentation/ABI/stable/sysfs-bus-vmbus +0 -7
@@ -63,13 +63,6 @@ Contact: Stephen Hemminger <[email protected]> Description: VCPU (sub)channel is affinitized to Users: tools/hv/lsvmbus and other debugging tools -What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/cpu -Date: September. 2017 -KernelVersion: 4.14 -Contact: Stephen Hemminger <[email protected]> -Description: VCPU (sub)channel is affinitized to -Users: tools/hv/lsvmbus and other debugging tools - What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/in_mask Date: September. 2017 KernelVersion: 4.14
Signature · 1 line
2.26.2
PATCH v2 34/39 docs: ABI: unify /sys/class/leds/<led>/brightness documentation
In reply to Mauro Carvalho ChehabThis ABI is defined twice, one for normal leds and another one for multicolor ones.
Ensure that just one definition is there at ABI.
--- Documentation/ABI/testing/sysfs-class-led | 25 ++++++++++++++++--- .../ABI/testing/sysfs-class-led-multicolor | 23 +++++------------ 2 files changed, 28 insertions(+), 20 deletions(-)
Documentation/ABI/testing/sysfs-class-led +22 -3
@@ -3,9 +3,26 @@ Date: March 2006 KernelVersion: 2.6.17 Contact: Richard Purdie <[email protected]> Description: - Set the brightness of the LED. Most LEDs don't - have hardware brightness support, so will just be turned on for - non-zero brightness settings. The value is between 0 and + Set the brightness of the LED. + + Most LEDs don't have hardware brightness support, so will + just be turned on for non-zero brightness settings. + + .. Note:: + + For multicolor LEDs, writing to this file will update all + LEDs within the group to a calculated percentage of what + each color LED intensity is set to. + + The percentage is calculated for each grouped LED via + the equation below:: + + led_brightness = brightness * multi_intensity/max_brightness + + For additional details please refer to + Documentation/leds/leds-class-multicolor.rst. + + The value is between 0 and /sys/class/leds/<led>/max_brightness. Writing 0 to this file clears active trigger.
@@ -13,6 +30,8 @@ Description: Writing non-zero to this file while trigger is active changes the top brightness trigger is going to use. + + What: /sys/class/leds/<led>/max_brightness Date: March 2006 KernelVersion: 2.6.17
Documentation/ABI/testing/sysfs-class-led-multicolor +6 -17
@@ -1,20 +1,3 @@ -What: /sys/class/leds/<led>/brightness -Date: March 2020 -KernelVersion: 5.9 -Contact: Dan Murphy <[email protected]> -Description: read/write - Writing to this file will update all LEDs within the group to a - calculated percentage of what each color LED intensity is set - to. The percentage is calculated for each grouped LED via the - equation below: - - led_brightness = brightness * multi_intensity/max_brightness - - For additional details please refer to - Documentation/leds/leds-class-multicolor.rst. - - The value of the LED is from 0 to - /sys/class/leds/<led>/max_brightness. What: /sys/class/leds/<led>/multi_index Date: March 2020
@@ -25,6 +8,9 @@ Description: read as an array of strings as they are indexed in the multi_intensity file. + For additional details please refer to + Documentation/leds/leds-class-multicolor.rst. + What: /sys/class/leds/<led>/multi_intensity Date: March 2020 KernelVersion: 5.9
@@ -33,3 +19,6 @@ Description: read/write This file contains array of integers. Order of components is described by the multi_index array. The maximum intensity should not exceed /sys/class/leds/<led>/max_brightness. + + For additional details please refer to + Documentation/leds/leds-class-multicolor.rst.
Signature · 1 line
2.26.2
PATCH v2 35/39 docs: ABI: sysfs-class-power: unify duplicated properties
In reply to Mauro Carvalho ChehabThe ABI is not supposed to have duplicated entries, as warned by get_abi.pl:
$ ./scripts/get_abi.pl validate 2>&1|grep sysfs-class-power Warning: /sys/class/power_supply/<supply_name>/current_avg is defined 2 times: Documentation/ABI/testing/sysfs-class-power:108 Documentation/ABI/testing/sysfs-class-power:391 Warning: /sys/class/power_supply/<supply_name>/current_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:121 Documentation/ABI/testing/sysfs-class-power:404 Warning: /sys/class/power_supply/<supply_name>/current_now is defined 2 times: Documentation/ABI/testing/sysfs-class-power:130 Documentation/ABI/testing/sysfs-class-power:414 Warning: /sys/class/power_supply/<supply_name>/temp is defined 2 times: Documentation/ABI/testing/sysfs-class-power:281 Documentation/ABI/testing/sysfs-class-power:493 Warning: /sys/class/power_supply/<supply_name>/temp_alert_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:291 Documentation/ABI/testing/sysfs-class-power:505 Warning: /sys/class/power_supply/<supply_name>/temp_alert_min is defined 2 times: Documentation/ABI/testing/sysfs-class-power:306 Documentation/ABI/testing/sysfs-class-power:521 Warning: /sys/class/power_supply/<supply_name>/temp_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:322 Documentation/ABI/testing/sysfs-class-power:537 Warning: /sys/class/power_supply/<supply_name>/temp_min is defined 2 times: Documentation/ABI/testing/sysfs-class-power:333 Documentation/ABI/testing/sysfs-class-power:547 Warning: /sys/class/power_supply/<supply_name>/voltage_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:356 Documentation/ABI/testing/sysfs-class-power:571 Warning: /sys/class/power_supply/<supply_name>/voltage_min is defined 2 times: Documentation/ABI/testing/sysfs-class-power:367 Documentation/ABI/testing/sysfs-class-power:581 Warning: /sys/class/power_supply/<supply_name>/voltage_now is defined 2 times: Documentation/ABI/testing/sysfs-class-power:378 Documentation/ABI/testing/sysfs-class-power:591
Yet, both USB and Battery share a common set of charging-related properties.
Unify the entries for such properties in order to avoid duplication, while preserving the battery and USB-specific data properly documented.
--- Documentation/ABI/testing/sysfs-class-power | 486 +++++++++----------- 1 file changed, 223 insertions(+), 263 deletions(-)
Documentation/ABI/testing/sysfs-class-power +223 -263
@@ -36,7 +36,229 @@ Description: Access: Read Valid values: "Battery", "UPS", "Mains", "USB", "Wireless" -===== Battery Properties ===== +**Battery and USB properties** + +What: /sys/class/power_supply/<supply_name>/current_avg +Date: May 2007 +Contact: [email protected] +Description: + Battery: + + Reports an average IBAT current reading for the battery, over + a fixed period. Normally devices will provide a fixed interval + in which they average readings to smooth out the reported + value. + + USB: + + Reports an average IBUS current reading over a fixed period. + Normally devices will provide a fixed interval in which they + average readings to smooth out the reported value. + + Access: Read + + Valid values: Represented in microamps. Negative values are + used for discharging batteries, positive values for charging + batteries and for USB IBUS current. + +What: /sys/class/power_supply/<supply_name>/current_max +Date: October 2010 +Contact: [email protected] +Description: + Battery: + + Reports the maximum IBAT current allowed into the battery. + + USB: + + Reports the maximum IBUS current the supply can support. + + Access: Read + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/current_now +Date: May 2007 +Contact: [email protected] +Description: + + Battery: + + Reports an instant, single IBAT current reading for the + battery. This value is not averaged/smoothed. + + Access: Read + + USB: + + Reports the IBUS current supplied now. This value is generally + read-only reporting, unless the 'online' state of the supply + is set to be programmable, in which case this value can be set + within the reported min/max range. + + Access: Read, Write + + Valid values: Represented in microamps. Negative values are + used for discharging batteries, positive values for charging + batteries and for USB IBUS current. + +What: /sys/class/power_supply/<supply_name>/temp +Date: May 2007 +Contact: [email protected] +Description: + Battery: + + Reports the current TBAT battery temperature reading. + + USB: + + Reports the current supply temperature reading. This would + normally be the internal temperature of the device itself + (e.g TJUNC temperature of an IC) + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_alert_max +Date: July 2012 +Contact: [email protected] +Description: + Battery: + + Maximum TBAT temperature trip-wire value where the supply will + notify user-space of the event. + + USB: + + Maximum supply temperature trip-wire value where the supply + will notify user-space of the event. + + This is normally used for the charging scenario where + user-space needs to know if the temperature has crossed an + upper threshold so it can take appropriate action (e.g. warning + user that the temperature is critically high, and charging has + stopped). + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_alert_min +Date: July 2012 +Contact: [email protected] +Description: + + Battery: + + Minimum TBAT temperature trip-wire value where the supply will + notify user-space of the event. + + USB: + + Minimum supply temperature trip-wire value where the supply + will notify user-space of the event. + + This is normally used for the charging scenario where user-space + needs to know if the temperature has crossed a lower threshold + so it can take appropriate action (e.g. warning user that + temperature level is high, and charging current has been + reduced accordingly to remedy the situation). + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_max +Date: July 2014 +Contact: [email protected] +Description: + Battery: + + Reports the maximum allowed TBAT battery temperature for + charging. + + USB: + + Reports the maximum allowed supply temperature for operation. + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_min +Date: July 2014 +Contact: [email protected] +Description: + Battery: + + Reports the minimum allowed TBAT battery temperature for + charging. + + USB: + + Reports the minimum allowed supply temperature for operation. + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/voltage_max, +Date: January 2008 +Contact: [email protected] +Description: + Battery: + + Reports the maximum safe VBAT voltage permitted for the + battery, during charging. + + USB: + + Reports the maximum VBUS voltage the supply can support. + + Access: Read + + Valid values: Represented in microvolts + +What: /sys/class/power_supply/<supply_name>/voltage_min, +Date: January 2008 +Contact: [email protected] +Description: + Battery: + + Reports the minimum safe VBAT voltage permitted for the + battery, during discharging. + + USB: + + Reports the minimum VBUS voltage the supply can support. + + Access: Read + + Valid values: Represented in microvolts + +What: /sys/class/power_supply/<supply_name>/voltage_now, +Date: May 2007 +Contact: [email protected] +Description: + Battery: + + Reports an instant, single VBAT voltage reading for the + battery. This value is not averaged/smoothed. + + Access: Read + + USB: + + Reports the VBUS voltage supplied now. This value is generally + read-only reporting, unless the 'online' state of the supply + is set to be programmable, in which case this value can be set + within the reported min/max range. + + Access: Read, Write + + Valid values: Represented in microvolts + +**Battery Properties** What: /sys/class/power_supply/<supply_name>/capacity Date: May 2007
@@ -106,40 +328,6 @@ Description: "Unknown", "Critical", "Low", "Normal", "High", "Full" -What: /sys/class/power_supply/<supply_name>/current_avg -Date: May 2007 -Contact: [email protected] -Description: - Reports an average IBAT current reading for the battery, over a - fixed period. Normally devices will provide a fixed interval in - which they average readings to smooth out the reported value. - - Access: Read - - Valid values: Represented in microamps. Negative values are used - for discharging batteries, positive values for charging batteries. - -What: /sys/class/power_supply/<supply_name>/current_max -Date: October 2010 -Contact: [email protected] -Description: - Reports the maximum IBAT current allowed into the battery. - - Access: Read - Valid values: Represented in microamps - -What: /sys/class/power_supply/<supply_name>/current_now -Date: May 2007 -Contact: [email protected] -Description: - Reports an instant, single IBAT current reading for the battery. - This value is not averaged/smoothed. - - Access: Read - - Valid values: Represented in microamps. Negative values are used - for discharging batteries, positive values for charging batteries. - What: /sys/class/power_supply/<supply_name>/charge_control_limit Date: Oct 2012 Contact: [email protected]
@@ -279,68 +467,6 @@ Description: "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd", "LiMn" -What: /sys/class/power_supply/<supply_name>/temp -Date: May 2007 -Contact: [email protected] -Description: - Reports the current TBAT battery temperature reading. - - Access: Read - - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_alert_max -Date: July 2012 -Contact: [email protected] -Description: - Maximum TBAT temperature trip-wire value where the supply will - notify user-space of the event. This is normally used for the - battery charging scenario where user-space needs to know the - battery temperature has crossed an upper threshold so it can - take appropriate action (e.g. warning user that battery level is - critically high, and charging has stopped). - - Access: Read - - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_alert_min -Date: July 2012 -Contact: [email protected] -Description: - Minimum TBAT temperature trip-wire value where the supply will - notify user-space of the event. This is normally used for the - battery charging scenario where user-space needs to know the - battery temperature has crossed a lower threshold so it can take - appropriate action (e.g. warning user that battery level is - high, and charging current has been reduced accordingly to - remedy the situation). - - Access: Read - - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_max -Date: July 2014 -Contact: [email protected] -Description: - Reports the maximum allowed TBAT battery temperature for - charging. - - Access: Read - - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_min -Date: July 2014 -Contact: [email protected] -Description: - Reports the minimum allowed TBAT battery temperature for - charging. - - Access: Read - - Valid values: Represented in 1/10 Degrees Celsius What: /sys/class/power_supply/<supply_name>/voltage_avg, Date: May 2007
@@ -354,77 +480,8 @@ Description: Valid values: Represented in microvolts -What: /sys/class/power_supply/<supply_name>/voltage_max, -Date: January 2008 -Contact: [email protected] -Description: - Reports the maximum safe VBAT voltage permitted for the battery, - during charging. - - Access: Read - - Valid values: Represented in microvolts - -What: /sys/class/power_supply/<supply_name>/voltage_min, -Date: January 2008 -Contact: [email protected] -Description: - Reports the minimum safe VBAT voltage permitted for the battery, - during discharging. - - Access: Read - - Valid values: Represented in microvolts - -What: /sys/class/power_supply/<supply_name>/voltage_now, -Date: May 2007 -Contact: [email protected] -Description: - Reports an instant, single VBAT voltage reading for the battery. - This value is not averaged/smoothed. - - Access: Read - - Valid values: Represented in microvolts - **USB Properties** -What: /sys/class/power_supply/<supply_name>/current_avg -Date: May 2007 -Contact: [email protected] -Description: - Reports an average IBUS current reading over a fixed period. - Normally devices will provide a fixed interval in which they - average readings to smooth out the reported value. - - Access: Read - - Valid values: Represented in microamps - - -What: /sys/class/power_supply/<supply_name>/current_max -Date: October 2010 -Contact: [email protected] -Description: - Reports the maximum IBUS current the supply can support. - - Access: Read - - Valid values: Represented in microamps - -What: /sys/class/power_supply/<supply_name>/current_now -Date: May 2007 -Contact: [email protected] -Description: - Reports the IBUS current supplied now. This value is generally - read-only reporting, unless the 'online' state of the supply - is set to be programmable, in which case this value can be set - within the reported min/max range. - - Access: Read, Write - - Valid values: Represented in microamps - What: /sys/class/power_supply/<supply_name>/input_current_limit Date: July 2014 Contact: [email protected]
@@ -491,70 +548,6 @@ Description: 2: Online Programmable - Programmable Voltage Supply == ================================================== -What: /sys/class/power_supply/<supply_name>/temp -Date: May 2007 -Contact: [email protected] -Description: - Reports the current supply temperature reading. This would - normally be the internal temperature of the device itself (e.g - TJUNC temperature of an IC) - - Access: Read - - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_alert_max -Date: July 2012 -Contact: [email protected] -Description: - Maximum supply temperature trip-wire value where the supply will - notify user-space of the event. This is normally used for the - charging scenario where user-space needs to know the supply - temperature has crossed an upper threshold so it can take - appropriate action (e.g. warning user that the supply - temperature is critically high, and charging has stopped to - remedy the situation). - - Access: Read - - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_alert_min -Date: July 2012 -Contact: [email protected] -Description: - Minimum supply temperature trip-wire value where the supply will - notify user-space of the event. This is normally used for the - charging scenario where user-space needs to know the supply - temperature has crossed a lower threshold so it can take - appropriate action (e.g. warning user that the supply - temperature is high, and charging current has been reduced - accordingly to remedy the situation). - - Access: Read - - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_max -Date: July 2014 -Contact: [email protected] -Description: - Reports the maximum allowed supply temperature for operation. - - Access: Read - - Valid values: Represented in 1/10 Degrees Celsius - -What: /sys/class/power_supply/<supply_name>/temp_min -Date: July 2014 -Contact: [email protected] -Description: - Reports the mainimum allowed supply temperature for operation. - - Access: Read - - Valid values: Represented in 1/10 Degrees Celsius - What: /sys/class/power_supply/<supply_name>/usb_type Date: March 2018 Contact: [email protected]
@@ -569,39 +562,6 @@ Description: "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD", "PD_DRP", "PD_PPS", "BrickID" -What: /sys/class/power_supply/<supply_name>/voltage_max -Date: January 2008 -Contact: [email protected] -Description: - Reports the maximum VBUS voltage the supply can support. - - Access: Read - - Valid values: Represented in microvolts - -What: /sys/class/power_supply/<supply_name>/voltage_min -Date: January 2008 -Contact: [email protected] -Description: - Reports the minimum VBUS voltage the supply can support. - - Access: Read - - Valid values: Represented in microvolts - -What: /sys/class/power_supply/<supply_name>/voltage_now -Date: May 2007 -Contact: [email protected] -Description: - Reports the VBUS voltage supplied now. This value is generally - read-only reporting, unless the 'online' state of the supply - is set to be programmable, in which case this value can be set - within the reported min/max range. - - Access: Read, Write - - Valid values: Represented in microvolts - **Device Specific Properties** What: /sys/class/power/ds2760-battery.*/charge_now
Signature · 1 line
2.26.2
PATCH v2 36/39 docs: ABI: sysfs-c2port: remove a duplicated entry
In reply to Mauro Carvalho ChehabAs warned by scripts/get_abi.pl:
Warning: /sys/class/c2port/c2portX/flash_erase is defined 2 times: Documentation/ABI/testing/sysfs-c2port:60 Documentation/ABI/testing/sysfs-c2port:68
This entry was added twice at the same patch. Probalby a cut-and paste issue.
--- Documentation/ABI/testing/sysfs-c2port | 7 ------- 1 file changed, 7 deletions(-)
Documentation/ABI/testing/sysfs-c2port +0 -7
@@ -66,13 +66,6 @@ Description: the "erase" command on the on-board flash of the connected micro. -What: /sys/class/c2port/c2portX/flash_erase -Date: October 2008 -Contact: Rodolfo Giometti <[email protected]> -Description: - The /sys/class/c2port/c2portX/flash_erase file show the - on-board flash size of the connected micro. - What: /sys/class/c2port/c2portX/reset Date: October 2008 Contact: Rodolfo Giometti <[email protected]>
Signature · 1 line
2.26.2
PATCH v2 37/39 docs: ABI: sysfs-class-backlight: unify ABI documentation
In reply to Mauro Carvalho ChehabBoth adp8860 and adp8870 define some extensions to the backlight class. This causes warnings:
Warning: /sys/class/backlight/<backlight>/ambient_light_level is defined 2 times: /sys/class/backlight/<backlight>/ambient_light_level:8 /sys/class/backlight/<backlight>/ambient_light_level:30
Warning: /sys/class/backlight/<backlight>/ambient_light_zone is defined 2 times: /sys/class/backlight/<backlight>/ambient_light_zone:18 /sys/class/backlight/<backlight>/ambient_light_zone:40
As ABI definitions shouldn't be duplicated.
Unfortunately, the ABI is dependent on the specific device features. As such, ambient_light_level range is somewhat different among the supported devices.
The ambient_light_zone is even worse: the meanings of each preset are different, and there's no ABI to retrieve the supported types nor their meanins. Unfortunately, it is too late to fix it without causing regressions, as this has been used since Kernel v2.6.35.
Rewrite those ABI documentation using the current documentation as a reference, and double-checking at the datasheets:
https://www.analog.com/media/en/technical-documentation/data-sheets/ADP8870.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/ADP8860.pdf
in order to properly document the differences between those two drivers.
--- .../ABI/testing/sysfs-class-backlight | 60 +++++++++++++++++++ .../ABI/testing/sysfs-class-backlight-adp8860 | 21 +------ .../sysfs-class-backlight-driver-adp8870 | 30 +--------- 3 files changed, 65 insertions(+), 46 deletions(-)
Documentation/ABI/testing/sysfs-class-backlight +60 -0
@@ -24,3 +24,63 @@ Description: non-linear The brightness changes non-linearly with each step. Brightness controls should use a linear mapping for a linear perception. + +What: /sys/class/backlight/<backlight>/ambient_light_level +Date: Apr, 2010 +KernelVersion: v2.6.35 +Contact: Michael Hennerich <[email protected]> +Description: + (RO) Get conversion value of the light sensor. + + The value is automatically updated every 80 ms when the + light sensor is enabled. + + The value range is device-driver specific: + + For ADP8870: + + It returns integer between 0 (dark) and 8000 (max ambient + brightness). + + For ADP8860: + + It returns a 13-bits integer. + +What: /sys/class/backlight/<backlight>/ambient_light_zone +Date: Apr, 2010 +KernelVersion: v2.6.35 +Contact: Michael Hennerich <[email protected]>, + [email protected] + +Description: + (RW) Read or write the specific brightness level at which the + backlight operates. + + The value meaning is device-driver specific: + + For ADP8860: + + == ========================== + 0 Off: Backlight set to 0 mA + 1 Level 1: daylight + 2 Level 2: bright + 3 Level 3: dark + == ========================== + + For ADP8870: + + == ========================== + 0 Off: Backlight set to 0 mA + 1 Level 1: daylight + 2 Level 2: bright + 3 Level 3: office + 4 Level 4: indoor + 5 Level 5: dark + == ========================== + + Writing 0 returns to normal/automatic ambient light level + operation. + + It can be enabled by writing the value stored in + /sys/class/backlight/<backlight>/max_brightness to + /sys/class/backlight/<backlight>/brightness.
Documentation/ABI/testing/sysfs-class-backlight-adp8860 +2 -19
@@ -6,25 +6,8 @@ adp8860, adp8861 and adp8863 devices: daylight (level 1), office (level 2) and dark (level 3). By default the brightness operates at the daylight brightness level. -What: /sys/class/backlight/<backlight>/ambient_light_level -Date: Apr, 2010 -KernelVersion: v2.6.35 -Contact: Michael Hennerich <[email protected]> -Description: - (RO) 13-bit conversion value for the first light sensor—high - byte (Bit 12 to Bit 8). The value is updated every 80 ms (when - the light sensor is enabled). - - -What: /sys/class/backlight/<backlight>/ambient_light_zone -Date: Apr, 2010 -KernelVersion: v2.6.35 -Contact: Michael Hennerich <[email protected]> -Description: - (RW) Read or write the specific level at which the backlight - operates. Value "0" enables automatic ambient light sensing, and - values "1", "2" or "3" set the control to daylight, office or - dark respectively. +See also /sys/class/backlight/<backlight>/ambient_light_level and +/sys/class/backlight/<backlight>/ambient_light_zone. What: /sys/class/backlight/<backlight>/l1_daylight_max
Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 +3 -27
@@ -1,3 +1,6 @@ +See also /sys/class/backlight/<backlight>/ambient_light_level and +/sys/class/backlight/<backlight>/ambient_light_zone. + What: /sys/class/backlight/<backlight>/<ambient light zone>_max What: /sys/class/backlight/<backlight>/l1_daylight_max What: /sys/class/backlight/<backlight>/l2_bright_max
@@ -27,30 +30,3 @@ Description: set to 0. Full off when the backlight is disabled. This file will also show the dim brightness level stored for this <ambient light zone>. - -What: /sys/class/backlight/<backlight>/ambient_light_level -Date: May 2011 -KernelVersion: 3.0 -Contact: [email protected] -Description: - Get conversion value of the light sensor. - This value is updated every 80 ms (when the light sensor - is enabled). Returns integer between 0 (dark) and - 8000 (max ambient brightness) - -What: /sys/class/backlight/<backlight>/ambient_light_zone -Date: May 2011 -KernelVersion: 3.0 -Contact: [email protected] -Description: - Get/Set current ambient light zone. Reading returns - integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark). - Writing a value between 1..5 forces the backlight controller - to enter the corresponding ambient light zone. - Writing 0 returns to normal/automatic ambient light level - operation. The ambient light sensing feature on these devices - is an extension to the API documented in - Documentation/ABI/stable/sysfs-class-backlight. - It can be enabled by writing the value stored in - /sys/class/backlight/<backlight>/max_brightness to - /sys/class/backlight/<backlight>/brightness.
Signature · 6 lines
2.26.2 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 38/39 docs: ABI: sysfs-class-led-trigger-pattern: remove hw_pattern duplication
In reply to Mauro Carvalho ChehabThe ABI files are supposed to be unique. Yet,
in the specific case of hw_pattern, there are some duplicated entries as warned by scripts/get_abi.pl:
Warning: /sys/class/leds/<led>/hw_pattern is defined 3 times: Documentation/ABI/testing/sysfs-class-led-trigger-pattern:14 Documentation/ABI/testing/sysfs-class-led-driver-sc27xx:0 Documentation/ABI/testing/sysfs-class-led-driver-el15203000:0
Drop the duplication from the ABI files, moving the specific definitions to files inside Documentation/leds.
--- .../testing/sysfs-class-led-driver-el15203000 | 135 ----------------- .../ABI/testing/sysfs-class-led-driver-sc27xx | 22 --- .../testing/sysfs-class-led-trigger-pattern | 4 +- Documentation/leds/index.rst | 1 + Documentation/leds/leds-el15203000.rst | 140 ++++++++++++++++++ Documentation/leds/leds-sc27xx.rst | 27 ++++ 6 files changed, 170 insertions(+), 159 deletions(-) delete mode 100644 Documentation/ABI/testing/sysfs-class-led-driver-sc27xx create mode 100644 Documentation/leds/leds-el15203000.rst create mode 100644 Documentation/leds/leds-sc27xx.rst
Documentation/ABI/testing/sysfs-class-led-driver-el15203000 +0 -135
@@ -1,138 +1,3 @@ -What: /sys/class/leds/<led>/hw_pattern -Date: September 2019 -KernelVersion: 5.5 -Description: - Specify a hardware pattern for the EL15203000 LED. - The LEDs board supports only predefined patterns by firmware - for specific LEDs. - - Breathing mode for Screen frame light tube:: - - "0 4000 1 4000" - - ^ - | - Max-| --- - | / \ - | / \ - | / \ / - | / \ / - Min-|- --- - | - 0------4------8--> time (sec) - - Cascade mode for Pipe LED:: - - "1 800 2 800 4 800 8 800 16 800" - - ^ - | - 0 On -|----+ +----+ +--- - | | | | | - Off-| +-------------------+ +-------------------+ - | - 1 On -| +----+ +----+ - | | | | | - Off |----+ +-------------------+ +------------------ - | - 2 On -| +----+ +----+ - | | | | | - Off-|---------+ +-------------------+ +------------- - | - 3 On -| +----+ +----+ - | | | | | - Off-|--------------+ +-------------------+ +-------- - | - 4 On -| +----+ +----+ - | | | | | - Off-|-------------------+ +-------------------+ +--- - | - 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec) - - Inverted cascade mode for Pipe LED:: - - "30 800 29 800 27 800 23 800 15 800" - - ^ - | - 0 On -| +-------------------+ +-------------------+ - | | | | | - Off-|----+ +----+ +--- - | - 1 On -|----+ +-------------------+ +------------------ - | | | | | - Off | +----+ +----+ - | - 2 On -|---------+ +-------------------+ +------------- - | | | | | - Off-| +----+ +----+ - | - 3 On -|--------------+ +-------------------+ +-------- - | | | | | - Off-| +----+ +----+ - | - 4 On -|-------------------+ +-------------------+ +--- - | | | | | - Off-| +----+ +----+ - | - 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec) - - Bounce mode for Pipe LED:: - - "1 800 2 800 4 800 8 800 16 800 16 800 8 800 4 800 2 800 1 800" - - ^ - | - 0 On -|----+ +-------- - | | | - Off-| +---------------------------------------+ - | - 1 On -| +----+ +----+ - | | | | | - Off |----+ +-----------------------------+ +-------- - | - 2 On -| +----+ +----+ - | | | | | - Off-|---------+ +-------------------+ +------------- - | - 3 On -| +----+ +----+ - | | | | | - Off-|--------------+ +---------+ +------------------ - | - 4 On -| +---------+ - | | | - Off-|-------------------+ +----------------------- - | - 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec) - - Inverted bounce mode for Pipe LED:: - - "30 800 29 800 27 800 23 800 15 800 15 800 23 800 27 800 29 800 30 800" - - ^ - | - 0 On -| +---------------------------------------+ - | | | - Off-|----+ +-------- - | - 1 On -|----+ +-----------------------------+ +-------- - | | | | | - Off | +----+ +----+ - | - 2 On -|---------+ +-------------------+ +------------- - | | | | | - Off-| +----+ +----+ - | - 3 On -|--------------+ +---------+ +------------------ - | | | | | - Off-| +----+ +----+ - | - 4 On -|-------------------+ +----------------------- - | | | - Off-| +---------+ - | - 0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec) - What: /sys/class/leds/<led>/repeat Date: September 2019 KernelVersion: 5.5
Documentation/ABI/testing/sysfs-class-led-driver-sc27xx deleted +0 -22
@@ -1,22 +0,0 @@ -What: /sys/class/leds/<led>/hw_pattern -Date: September 2018 -KernelVersion: 4.20 -Description: - Specify a hardware pattern for the SC27XX LED. For the SC27XX - LED controller, it only supports 4 stages to make a single - hardware pattern, which is used to configure the rise time, - high time, fall time and low time for the breathing mode. - - For the breathing mode, the SC27XX LED only expects one brightness - for the high stage. To be compatible with the hardware pattern - format, we should set brightness as 0 for rise stage, fall - stage and low stage. - - - Min stage duration: 125 ms - - Max stage duration: 31875 ms - - Since the stage duration step is 125 ms, the duration should be - a multiplier of 125, like 125ms, 250ms, 375ms, 500ms ... 31875ms. - - Thus the format of the hardware pattern values should be: - "0 rise_duration brightness high_duration 0 fall_duration 0 low_duration".
Documentation/ABI/testing/sysfs-class-led-trigger-pattern +2 -2
@@ -23,8 +23,8 @@ Description: Since different LED hardware can have different semantics of hardware patterns, each driver is expected to provide its own - description for the hardware patterns in their ABI documentation - file. + description for the hardware patterns in their documentation + file at Documentation/leds/. What: /sys/class/leds/<led>/repeat Date: September 2018
Documentation/leds/index.rst +1 -0
@@ -17,6 +17,7 @@ LEDs uleds leds-blinkm + leds-el15203000 leds-lm3556 leds-lp3944 leds-lp5521
Documentation/leds/leds-el15203000.rst new file +140 -0
140 lines not on this page · raw message
Documentation/leds/leds-sc27xx.rst new file +27 -0
@@ -0,0 +1,27 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================== +Kernel driver for Spreadtrum SC27XX +=================================== + +/sys/class/leds/<led>/hw_pattern +-------------------------------- + +Specify a hardware pattern for the SC27XX LED. For the SC27XX +LED controller, it only supports 4 stages to make a single +hardware pattern, which is used to configure the rise time, +high time, fall time and low time for the breathing mode. + +For the breathing mode, the SC27XX LED only expects one brightness +for the high stage. To be compatible with the hardware pattern +format, we should set brightness as 0 for rise stage, fall +stage and low stage. + +- Min stage duration: 125 ms +- Max stage duration: 31875 ms + +Since the stage duration step is 125 ms, the duration should be +a multiplier of 125, like 125ms, 250ms, 375ms, 500ms ... 31875ms. + +Thus the format of the hardware pattern values should be: +"0 rise_duration brightness high_duration 0 fall_duration 0 low_duration".
Signature · 1 line
2.26.2
PATCH v2 39/39 scripts: get_abi.pl: assume ReST format by default
In reply to Mauro Carvalho ChehabAll ABI files are now compatible with ReST format. So, change the script default to assume that the ABI source files are compatible with ReST.
--- scripts/get_abi.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/get_abi.pl +1 -1
@@ -18,7 +18,7 @@ my $prefix="Documentation/ABI"; # # If true, assumes that the description is formatted with ReST # -my $description_is_rst = 0; +my $description_is_rst = 1; GetOptions( "debug|d+" => \$debug,
Signature · 1 line
2.26.2