Skip to contentSkip to conversation

Issue with SELinux Labeled NFS

DISCUSSION Anthony Messina 1 participant 2 messages Mar 11, 2014 – Mar 22, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

I've begun testing out the labeled NFSv4.2 features with good success with only one exception so far. I have several workstations that use NFSv4.2 mounted /home directories. I've been able to remove the SELinux boolean requirement for 'use_nfs_home_dirs', however, on *one* of these workstations, the /home directory is labeled 'unlabeled_t' after boot when it should be labeled with 'home_root_t'. This problem causes failures, as you can imagine.

I mount the filesystem on all of the workstations in the same manner:

# /etc/fstab
...
server.com:/home /home nfs rw,minorversion=2,sec=krb5p,x-systemd.automount 0 0

Yet the issue occurs on only *one* workstation. If I manually issue

chcon -t home_root_t /home

then I am able to login and use the system without issue.

All of the servers and workstations are using

kernel-3.13.6-200.fc20.x86_64
nfs-utils-1.2.9-3.0.fc20.x86_64

I realize this is not the SELinux mailing list, but I was wondering if anyone had any pointers on how to investigate this issue. The workstations are all nearly identical in configuration with the exception of a few user-based differences such as GnuCash on one, but not the other, etc.

Thanks for your guidance. -A

Signature · 2 lines
Anthony - http://messinet.com - http://messinet.com/~amessina/gallery
8F89 5E72 8DF0 BCF0 10BE 9967 92DC 35DC B001 4A4E
#1 lore raw
Quoted 22 lines · you

I've begun testing out the labeled NFSv4.2 features with good success with only one exception so far. I have several workstations that use NFSv4.2 mounted /home directories. I've been able to remove the SELinux boolean requirement for 'use_nfs_home_dirs', however, on *one* of these workstations, the /home directory is labeled 'unlabeled_t' after boot when it should be labeled with 'home_root_t'. This problem causes failures, as you can imagine.

I mount the filesystem on all of the workstations in the same manner:

# /etc/fstab
...
server.com:/home /home nfs rw,minorversion=2,sec=krb5p,x-systemd.automount 0
0

Yet the issue occurs on only *one* workstation. If I manually issue

chcon -t home_root_t /home

then I am able to login and use the system without issue.

All of the servers and workstations are using

Quoted 8 lines

kernel-3.13.6-200.fc20.x86_64
nfs-utils-1.2.9-3.0.fc20.x86_64

I realize this is not the SELinux mailing list, but I was wondering if anyone had any pointers on how to investigate this issue. The workstations are all nearly identical in configuration with the exception of a few user-based differences such as GnuCash on one, but not the other, etc.

While I haven't yet found a solution to this problem, I am able to confirm that I now see this other workstations and it appears that it may be some sort of race condition between the two mounts in the clients' fstab since it doesn't always occur on every workstation. Perhaps someone can help me spot a problem in the following server or client configuration.

My single NFS server has the following in /etc/exports:

/export 	2001:123:456:789::/64(fsid=0,crossmnt,sec=krb5p:krb5i) \
		10.1.1.0/24(fsid=0,crossmnt,sec=krb5p:krb5i)
/export/home	2001:123:456:789::/64(rw,sec=krb5p) \
		10.1.1.0/24(rw,sec=krb5p)
/export/media	2001:123:456:789::/64(rw,sec=krb5p:krb5i) \
		10.1.1.0/24(rw,sec=krb5p:krb5i)
/export/software	2001:123:456:789::/64(rw,sec=krb5p:krb5i) \
			10.1.1.0/24(rw,sec=krb5p:krb5i)

And the following bind mounts in /etc/fstab:

/home           /export/home            none    bind    0 0
/srv/media      /export/media           none    bind    0 0
/srv/software   /export/software        none    bind    0 0

And the following labels for the exported filesystems:

~]# ls -lZ /
drwxr-xr-x. root root system_u:object_r:home_root_t:s0 home

~]# ls -lZ /srv
drwxr-x---. auser agroup system_u:object_r:public_content_rw_t:s0 media drwxr-x---. auser family system_u:object_r:public_content_rw_t:s0 software

~]# ls -lZ /export

drwxr-xr-x. root  root    system_u:object_r:home_root_t:s0 home
drwxr-x---. auser agroup  system_u:object_r:public_content_rw_t:s0 media
drwxr-x---. auser family  system_u:object_r:public_content_rw_t:s0 software

The clients mount the exports via the following in /etc/fstab

server.com:/home /home nfs rw,minorversion=2,sec=krb5p,x-systemd.automount 0 0 server.com:/ /mnt/srv nfs rw,minorversion=2,sec=krb5i,x-systemd.automount 0 0

Again, the issue is that the /home mount on the clients tends to be mounted as "unlabeled_t" which causes failures with SELinux enabled.

Is there an issue in the way I'm exporting things that may cause this?

Thanks in advance for any pointers. -A

Signature · 2 lines
Anthony - http://messinet.com - http://messinet.com/~amessina/gallery
8F89 5E72 8DF0 BCF0 10BE 9967 92DC 35DC B001 4A4E