Skip to contentSkip to conversation

dma: pl330: Use the common of_dma_xlate_by_chan_id

PATCH RESEND PADMAVATHI VENNA 2 participants 2 messages May 14, 2013 dmaengine

lore
Share & tools
lore
#0 lore raw

Hi Lars,

As I remember Vinod had asked you to keep DMA_CYCLIC capability on both controller and client side. But I didn't see in this patch set. Otherwise your patches looks good to me.

Thanks
Padma
------- Original Message -------
Sender : Lars-Peter Clausen<[email protected]>
Date : May 13, 2013 01:02 (GMT+09:00)
Title : [PATCH resend 2/2] dma: pl330: Use the common of_dma_xlate_by_chan_id

Use the generic of_dma_xlate_by_chan_id xlate callback instead of a custom implementation.

There is one minor difference between the generic of_dma_xlate_by_chan_id function and the pl330 specific one. of_dma_xlate_by_chan_id only sets the DMA_SLAVE capability for the channel capability mask, while the pl330 driver additionally sets the DMA_CYCLIC capability. But since all pl330 channels which have the DMA_SLAVE capability set also have DMA_CYCLIC capability set both functions will have the same result.

Signed-off-by Lars-Peter Clausen

---
drivers/dma/pl330.c | 41 +----------------------------------------

1 file changed, 1 insertion(+), 40 deletions(-)
drivers/dma/pl330.c +0 -0
index a17553f..c831fae 100644
@@ -608,11 +608,6 @@ struct dma_pl330_desc {

struct dma_pl330_chan *pchan;
};

-struct dma_pl330_filter_args {
- struct dma_pl330_dmac *pdmac;
- unsigned int chan_id;
-};
-
static inline void _callback(struct pl330_req *r, enum pl330_op_err err) {
if (r && r->xfer_cb)
@@ -2358,16 +2353,6 @@ static void dma_pl330_rqcb(void *token, enum pl330_op_err err) tasklet_schedule(&pch->task);
}

-static bool pl330_dt_filter(struct dma_chan *chan, void *param) -{
- struct dma_pl330_filter_args *fargs = param;
-
- if (chan->device != &fargs->pdmac->ddma)
- return false;
-
- return (chan->chan_id == fargs->chan_id);
-}
-
bool pl330_filter(struct dma_chan *chan, void *param)
{
u8 *peri_id;
@@ -2380,30 +2365,6 @@ bool pl330_filter(struct dma_chan *chan, void *param) }
EXPORT_SYMBOL(pl330_filter);

-static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
- struct of_dma *ofdma)
-{
- int count = dma_spec->args_count;
- struct dma_pl330_dmac *pdmac = ofdma->of_dma_data;
- struct dma_pl330_filter_args fargs;
- dma_cap_mask_t cap;
-
- if (!pdmac)
- return NULL;
-
- if (count != 1)
- return NULL;
-
- fargs.pdmac = pdmac;
- fargs.chan_id = dma_spec->args[0];
-
- dma_cap_zero(cap);
- dma_cap_set(DMA_SLAVE, cap);
- dma_cap_set(DMA_CYCLIC, cap);
-
- return dma_request_channel(cap, pl330_dt_filter, &fargs);
-}
-
static int pl330_alloc_chan_resources(struct dma_chan *chan)
{
struct dma_pl330_chan *pch = to_pchan(chan);
@@ -2989,7 +2950,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)

if (adev->dev.of_node) {
ret = of_dma_controller_register(adev->dev.of_node,
- of_dma_pl330_xlate, pdmac);
+ of_dma_pl330_xlate, pd);
if (ret) {
dev_err(&adev->dev,
"unable to register DMA to the generic DT DMA helpers\n");

Signature · 1 line
1.8.0ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ¥Šwÿº{.nÇ+‰·¥Š{±þG«�éÿŠ{ayºʇڙë,j­¢f£¢·hš�ï�êÿ‘êçz_è®(­éšŽŠÝ¢j"�ú¶m§ÿÿ¾«þG«�éÿ¢¸?™¨è­Ú&£ø§~�á¶iO•æ¬z·švØ^¶m§ÿÿÃÿ¶ìÿ¢¸?–I¥
#1 lore raw
Quoted 3 lines · PADMAVATHI VENNA

Hi Lars,

As I remember Vinod had asked you to keep DMA_CYCLIC capability on both controller and client side. But I didn't see in this patch set.

That doesn't make too much sense, since it means you'd only be able to request channels for controllers which support cyclic transfers.

Quoted 97 lines

Otherwise your patches looks good to me.

Thanks
Padma
------- Original Message -------
Sender : Lars-Peter Clausen<[email protected]>
Date : May 13, 2013 01:02 (GMT+09:00)
Title : [PATCH resend 2/2] dma: pl330: Use the common of_dma_xlate_by_chan_id

Use the generic of_dma_xlate_by_chan_id xlate callback instead of a custom implementation.

There is one minor difference between the generic of_dma_xlate_by_chan_id function and the pl330 specific one. of_dma_xlate_by_chan_id only sets the DMA_SLAVE capability for the channel capability mask, while the pl330 driver additionally sets the DMA_CYCLIC capability. But since all pl330 channels which have the DMA_SLAVE capability set also have DMA_CYCLIC capability set both functions will have the same result.

Signed-off-by Lars-Peter Clausen

---
drivers/dma/pl330.c | 41 +----------------------------------------

1 file changed, 1 insertion(+), 40 deletions(-)
drivers/dma/pl330.c +1 -40
index a17553f..c831fae 100644
@@ -608,11 +608,6 @@ struct dma_pl330_desc {
 struct dma_pl330_chan *pchan;
 };
 
-struct dma_pl330_filter_args {
- struct dma_pl330_dmac *pdmac;
- unsigned int chan_id;
-};
-
 static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
 {
 if (r && r->xfer_cb)
@@ -2358,16 +2353,6 @@ static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
 tasklet_schedule(&pch->task);
 }
 
-static bool pl330_dt_filter(struct dma_chan *chan, void *param)
-{
- struct dma_pl330_filter_args *fargs = param;
-
- if (chan->device != &fargs->pdmac->ddma)
- return false;
-
- return (chan->chan_id == fargs->chan_id);
-}
-
 bool pl330_filter(struct dma_chan *chan, void *param)
 {
 u8 *peri_id;
@@ -2380,30 +2365,6 @@ bool pl330_filter(struct dma_chan *chan, void *param)
 }
 EXPORT_SYMBOL(pl330_filter);
 
-static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
- struct of_dma *ofdma)
-{
- int count = dma_spec->args_count;
- struct dma_pl330_dmac *pdmac = ofdma->of_dma_data;
- struct dma_pl330_filter_args fargs;
- dma_cap_mask_t cap;
-
- if (!pdmac)
- return NULL;
-
- if (count != 1)
- return NULL;
-
- fargs.pdmac = pdmac;
- fargs.chan_id = dma_spec->args[0];
-
- dma_cap_zero(cap);
- dma_cap_set(DMA_SLAVE, cap);
- dma_cap_set(DMA_CYCLIC, cap);
-
- return dma_request_channel(cap, pl330_dt_filter, &fargs);
-}
-
 static int pl330_alloc_chan_resources(struct dma_chan *chan)
 {
 struct dma_pl330_chan *pch = to_pchan(chan);
@@ -2989,7 +2950,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 
 if (adev->dev.of_node) {
 ret = of_dma_controller_register(adev->dev.of_node,
- of_dma_pl330_xlate, pdmac);
+ of_dma_pl330_xlate, pd);
 if (ret) {
 dev_err(&adev->dev,
 "unable to register DMA to the generic DT DMA helpers\n");