arm64: dts: rockchip: add power button support for Firefly-RK3399

index 8ac29824923c..2fe443511d21 100644
@@ -42,6 +42,7 @@
 
 /dts-v1/;
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/linux-event-codes.h>
 #include "rk3399.dtsi"
 #include "rk3399-opp.dtsi"
 

@@ -132,6 +133,25 @@
 		};
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		button at 0 {
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			gpio-key,wakeup = <1>;
+			debounce-interval = <100>;
+		};
+	};
+
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rk808 1>;

index 2fe443511d21..69851757584d 100644
@@ -233,6 +233,26 @@
 		regulator-max-microvolt = <1400000>;
 		vin-supply = <&vcc_sys>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		work-led {
+			label = "work";
+			default-state = "on";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&work_led_gpio>;
+		};
+
+		diy-led {
+			label = "diy";
+			default-state = "off";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&diy_led_gpio>;
+		};
+	};
 };
 
 &cpu_l0 {

@@ -647,6 +667,16 @@
 			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	leds {
+		work_led_gpio: work_led-gpio {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_gpio: diy_led-gpio {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pwm0 {