Skip to contentSkip to conversation

ath5k: AHB port. Use generic DMA instead of PCI API.

PATCH In review Wojciech Dubowik 4 participants 4 messages Nov 11, 2010 – Nov 24, 2010 1 message not in the archive Atheros ATH5K wireless driver

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): 17888045.991289487433290.JavaMail.wlan@CHBU500181

#1 lore raw

PATCH 1/9 ath5k: AHB port. Use generic DMA instead of PCI API.

General comments for AHB bus support in ath5k:
- most of the original patches came from Felix Fetikau. I have used them as a reference and ported to current git tree
- tried with access point functionality with WPA2 and without encryption
- tested on AR5312 for AHB and AR5414 and AR5212 for PCI
- compat wireless from openwrt was used for testing these patches
- last two patches have to be applied together because otherwise hardware will crash on reset if only number 9 is committed. I have kept them separated for better visibility

Generic DMA is needed for AHB support.

---
 drivers/net/wireless/ath/ath5k/base.c |   65 ++++++++++++++++++---------------
 drivers/net/wireless/ath/ath5k/base.h |    4 ++-
 2 files changed, 38 insertions(+), 31 deletions(-)
drivers/net/wireless/ath/ath5k/base.c +35 -30
index b9f93fb..7286b5c 100644
@@ -197,8 +197,8 @@ static inline void ath5k_txbuf_free_skb(struct ath5k_softc *sc,
 	BUG_ON(!bf);
 	if (!bf->skb)
 		return;
-	pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
-			PCI_DMA_TODEVICE);
+	dma_unmap_single(sc->dev, bf->skbaddr, bf->skb->len,
+			DMA_TO_DEVICE);
 	dev_kfree_skb_any(bf->skb);
 	bf->skb = NULL;
 	bf->skbaddr = 0;
@@ -214,8 +214,8 @@ static inline void ath5k_rxbuf_free_skb(struct ath5k_softc *sc,
 	BUG_ON(!bf);
 	if (!bf->skb)
 		return;
-	pci_unmap_single(sc->pdev, bf->skbaddr, common->rx_bufsize,
-			PCI_DMA_FROMDEVICE);
+	dma_unmap_single(sc->dev, bf->skbaddr, common->rx_bufsize,
+			DMA_FROM_DEVICE);
 	dev_kfree_skb_any(bf->skb);
 	bf->skb = NULL;
 	bf->skbaddr = 0;
@@ -659,10 +659,11 @@ struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr)
 		return NULL;
 	}
 
-	*skb_addr = pci_map_single(sc->pdev,
+	*skb_addr = dma_map_single(sc->dev,
 				   skb->data, common->rx_bufsize,
-				   PCI_DMA_FROMDEVICE);
-	if (unlikely(pci_dma_mapping_error(sc->pdev, *skb_addr))) {
+				   DMA_FROM_DEVICE);
+
+	if (unlikely(dma_mapping_error(sc->dev, *skb_addr))) {
 		ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
 		dev_kfree_skb(skb);
 		return NULL;
@@ -758,8 +759,8 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
 	flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
 
 	/* XXX endianness */
-	bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
-			PCI_DMA_TODEVICE);
+	bf->skbaddr = dma_map_single(sc->dev, skb->data, skb->len,
+			DMA_TO_DEVICE);
 
 	rate = ieee80211_get_tx_rate(sc->hw, info);
 	if (!rate) {
@@ -839,7 +840,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
 
 	return 0;
 err_unmap:
-	pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
+	dma_unmap_single(sc->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE);
 	return ret;
 }
 
@@ -848,7 +849,7 @@ err_unmap:
 \*******************/
 
 static int
-ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
+ath5k_desc_alloc(struct ath5k_softc *sc)
 {
 	struct ath5k_desc *ds;
 	struct ath5k_buf *bf;
@@ -859,7 +860,8 @@ ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
 	/* allocate descriptors */
 	sc->desc_len = sizeof(struct ath5k_desc) *
 			(ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
-	sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr);
+
+	sc->desc = dma_alloc_coherent(sc->dev, sc->desc_len, &sc->desc_daddr, GFP_KERNEL);
 	if (sc->desc == NULL) {
 		ATH5K_ERR(sc, "can't allocate descriptors\n");
 		ret = -ENOMEM;
@@ -905,14 +907,14 @@ ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
 
 	return 0;
 err_free:
-	pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
+	dma_free_coherent(sc->dev, sc->desc_len, sc->desc, sc->desc_daddr);
 err:
 	sc->desc = NULL;
 	return ret;
 }
 
 static void
-ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
+ath5k_desc_free(struct ath5k_softc *sc)
 {
 	struct ath5k_buf *bf;
 
@@ -924,7 +926,7 @@ ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
 		ath5k_txbuf_free_skb(sc, bf);
 
 	/* Free memory associated with all descriptors */
-	pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
+	dma_free_coherent(sc->dev, sc->desc_len, sc->desc, sc->desc_daddr);
 	sc->desc = NULL;
 	sc->desc_daddr = 0;
 
@@ -1551,9 +1553,9 @@ ath5k_tasklet_rx(unsigned long data)
 			if (!next_skb)
 				goto next;
 
-			pci_unmap_single(sc->pdev, bf->skbaddr,
+			dma_unmap_single(sc->dev, bf->skbaddr,
 					 common->rx_bufsize,
-					 PCI_DMA_FROMDEVICE);
+					 DMA_FROM_DEVICE);
 
 			skb_put(skb, rs.rs_datalen);
 
@@ -1716,8 +1718,9 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
 
 			skb = bf->skb;
 			bf->skb = NULL;
-			pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
-					PCI_DMA_TODEVICE);
+
+			dma_unmap_single(sc->dev, bf->skbaddr, skb->len,
+					DMA_TO_DEVICE);
 			ath5k_tx_frame_completed(sc, skb, &ts);
 		}
 
@@ -1771,12 +1774,13 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	u32 flags;
 	const int padsize = 0;
 
-	bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
-			PCI_DMA_TODEVICE);
+	bf->skbaddr = dma_map_single(sc->dev, skb->data, skb->len,
+			DMA_TO_DEVICE);
 	ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
 			"skbaddr %llx\n", skb, skb->data, skb->len,
 			(unsigned long long)bf->skbaddr);
-	if (pci_dma_mapping_error(sc->pdev, bf->skbaddr)) {
+
+	if (dma_mapping_error(sc->dev, bf->skbaddr)) {
 		ATH5K_ERR(sc, "beacon DMA mapping failed\n");
 		return -EIO;
 	}
@@ -1828,7 +1832,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 
 	return 0;
 err_unmap:
-	pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
+	dma_unmap_single(sc->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE);
 	return ret;
 }
 
@@ -2389,7 +2393,7 @@ ath5k_stop_locked(struct ath5k_softc *sc)
 	if (!test_bit(ATH_STAT_INVALID, sc->status)) {
 		ath5k_led_off(sc);
 		ath5k_hw_set_imr(ah, 0);
-		synchronize_irq(sc->pdev->irq);
+		synchronize_irq(sc->irq);
 	}
 	ath5k_txq_cleanup(sc);
 	if (!test_bit(ATH_STAT_INVALID, sc->status)) {
@@ -2535,7 +2539,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
 	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
 
 	ath5k_hw_set_imr(ah, 0);
-	synchronize_irq(sc->pdev->irq);
+	synchronize_irq(sc->irq);
 	stop_tasklets(sc);
 
 	if (chan) {
@@ -2641,7 +2645,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	/*
 	 * Allocate tx+rx descriptors and populate the lists.
 	 */
-	ret = ath5k_desc_alloc(sc, pdev);
+	ret = ath5k_desc_alloc(sc);
 	if (ret) {
 		ATH5K_ERR(sc, "can't allocate descriptors\n");
 		goto err;
@@ -2705,8 +2709,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 
 	ret = ath5k_eeprom_read_mac(ah, mac);
 	if (ret) {
-		ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
-			sc->pdev->device);
+		ATH5K_ERR(sc, "unable to read address from EEPROM\n");
 		goto err_queues;
 	}
 
@@ -2741,7 +2744,7 @@ err_queues:
 err_bhal:
 	ath5k_hw_release_tx_queue(ah, sc->bhalq);
 err_desc:
-	ath5k_desc_free(sc, pdev);
+	ath5k_desc_free(sc);
 err:
 	return ret;
 }
@@ -2765,7 +2768,7 @@ ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	 * Other than that, it's straightforward...
 	 */
 	ieee80211_unregister_hw(hw);
-	ath5k_desc_free(sc, pdev);
+	ath5k_desc_free(sc);
 	ath5k_txq_release(sc);
 	ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
 	ath5k_unregister_leds(sc);
@@ -3558,6 +3561,8 @@ ath5k_pci_probe(struct pci_dev *pdev,
 	sc = hw->priv;
 	sc->hw = hw;
 	sc->pdev = pdev;
+	sc->dev = &pdev->dev;
+	sc->irq = pdev->irq;
 
 	/*
 	 * Mark the device as detached to avoid processing
drivers/net/wireless/ath/ath5k/base.h +3 -1
index 9a79773..0362f8e 100644
@@ -169,7 +169,9 @@ struct ath5k_vif {
 /* Software Carrier, keeps track of the driver state
  * associated with an instance of a device */
 struct ath5k_softc {
-	struct pci_dev		*pdev;		/* for dma mapping */
+	struct pci_dev		*pdev;
+	struct device		*dev;		/* for dma mapping */
+	int irq;
 	void __iomem		*iobase;	/* address of the device */
 	struct mutex		lock;		/* dev-level lock */
 	struct ieee80211_hw	*hw;		/* IEEE 802.11 common */
Signature · 1 line
1.7.1
#2 lore raw
Quoted 10 lines · Wojciech Dubowik

General comments for AHB bus support in ath5k:
 - most of the original patches came from Felix Fetikau. I have used them as a reference and ported to current git tree
 - tried with access point functionality with WPA2 and without encryption
 - tested on AR5312 for AHB and AR5414 and AR5212 for PCI
 - compat wireless from openwrt was used for testing these patches
 - last two patches have to be applied together because otherwise hardware will crash on reset if only number 9 is committed. I have kept them separated for better visibility

Quoted 3 lines

Generic DMA is needed for AHB support.

Nice! You want to send these patches in a series as you have but use a cover letter to introduce and explain the series. This patch's commit log should only note that this uses the Generic DMA APIs in order to later support AHB. You can get yourself a cover letter using git format-patch --cover-letter. For more elaborate examples check out:

http://wireless.kernel.org/en/developers/Documentation/git-guide

Luis

#3 lore raw
Quoted 11 lines · Luis R. Rodriguez
Quoted 7 lines · Wojciech Dubowik

General comments for AHB bus support in ath5k:
 - most of the original patches came from Felix Fetikau. I have used them as a reference and ported to current git tree
 - tried with access point functionality with WPA2 and without encryption
 - tested on AR5312 for AHB and AR5414 and AR5212 for PCI
 - compat wireless from openwrt was used for testing these patches
 - last two patches have to be applied together because otherwise hardware will crash on reset if only number 9 is committed. I have kept them separated for better visibility

Nice! You want to send these patches in a series as you have but use a cover letter to introduce and explain the series.

akpm would disagree :)

Quoted 4 lines

This patch's commit
log should only note that this uses the Generic DMA APIs in order to later support AHB. You can get yourself a cover letter using git format-patch --cover-letter. For more elaborate examples check out:

ACK, the comments at the top should be in a cover letter or after the "---", or rewritten to be worth storing in the kernel history.

Could you also cc [email protected]?

Thanks for doing this work!

Signature · 1 line
Bob Copeland %% www.bobcopeland.com
#4 lore raw
In reply to Wojciech Dubowik
Quoted 7 lines · Wojciech Dubowik

General comments for AHB bus support in ath5k:
- most of the original patches came from Felix Fetikau. I have used them as a reference and ported to current git tree
- tried with access point functionality with WPA2 and without encryption
- tested on AR5312 for AHB and AR5414 and AR5212 for PCI
- compat wireless from openwrt was used for testing these patches
- last two patches have to be applied together because otherwise hardware will crash on reset if only number 9 is committed. I have kept them separated for better visibility

Are we going to see a repost of this series?

John

Signature · 2 lines
John W. Linville		Someday the world will need a hero, and you
[email protected]			might be all we have.  Be ready.