PPC8247 booting error

i want to mapping FIFO memory to bank 3 by configure br3 and or3 the boot info as following.

in my code, i have mapped FIFO to 0xD0000000, then i red the value from this address.

the prompts as following

there is some wrong with BRx and ORx set? or something others?

please give me some suggestion, thanks everyone.

## Booting image at 00400000 ...

   Image Name:   Linux-2.6.11
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    818473 Bytes = 799.3 kB

Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
OK
Linux version 2.6.11 ([email protected]) (gcc version 4.0.0 (DENX ELDK 4.0 4.0.0))

#108 Mon May 4 22:54:23 EDT 2009

Motorola PQ2 ADS PowerPC port

Built 1 zonelists

Kernel command line: mem=32M console=ttyCPM0,9600 root=/dev/nfs/ rw

nfsroot=192.168.0.131:/root/chengmo/fs_folder/rootfs

ip=192.168.0.100:192.168.0.131:#:255.0.0.0:::off

PID hash table entries: 256 (order: 8, 4096 bytes)

Warning: real time clock seems stuck!

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 30632k available (1420k kernel code, 272k data, 88k init, 0k highmem)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

scheduling while atomic: swapper/0x00000002/0

Call trace: [c015fe20]  [c0003fe0]  [c01a09b4]  [c0194614]  [000035fc] 

NET: Registered protocol family 16

Sauce : fifo mapping to bank3 ! // here, indicate has enter fifo_init
function, but after

this...

Oops: kernel access of bad area, sig: 11 [#1]

PREEMPT

NIP: C01A2108 LR: C01A2104 SP: C0227FC0 REGS: c0227f10 TRAP: 0300 Not
tainted

MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11

DAR: D0000000, DSISR: 20000000

TASK = c0220ab0[1] 'swapper' THREAD: c0226000

Last syscall: 120

GPR00: C01A2104 C0227FC0 C0220AB0 00000025 00000467 FFFFFFFF F00000A0 00000022

GPR08: 001FF1A0 D0000000 F00000A8 C0227ED0 00000001 7FBDFFFF 02000000 00000000

GPR16: 00800000 01FFF9E8 FFFFFFFF 00000000 007FFF00 01FFA4DC 01BD92B8 00000001

GPR24: 00000000 00400000 C01B0000 C0160000 C01A0000 00000001 C0226000 C01A86A8

Call trace: [c0003a40]  [c0006504] 

Kernel panic - not syncing: Attempted to kill init!

here, i have other questions about these information.

what dose mean by "NIP : C01A2108" ? i supposed "C01A2108" may be a address of user space,

what about NIP ?
and what the expression "DAR, DSISR, TASK, and GPR00-24" represent.

i hope some will let me know those or recommand some book for me. thanks

View this message in context: http://www.nabble.com/PPC8247-booting-error-tp23381214p23381214.html
Sent from the linuxppc-dev mailing list archive at Nabble.com.

You need to pass your physical address (0xd0000000) to ioremap() to obtain a virtual address that you can dereference.

You've got another problem here that you'll want to look into.

-Scott

thanks for Scott's following

actually, i have done that like you said. pass my phy addr to a virtual addr, but i suppose it is a kernel virtual addr. i wanna get data from phy in my application of user space. i try it by copy_to_user transfer a kernel virtual addr to a use virtual addr for using by user. but copy_to_user failed...

i do it like this

ssize_t read(....,char *buf,....,....)

{
     ....
      kernel_buf = (void *)ioremap(0xD0000000, 4096);
      copy_to_user(buf, kernel_buf, 4096); 
     ....
}

View this message in context: http://www.nabble.com/PPC8247-booting-error-tp23381214p23438722.html
Sent from the linuxppc-dev mailing list archive at Nabble.com.