dt-bindings: power: reset: add yaml bindings for LinkStation power off
Subsystems (2)
PATCH 2/2 dt-bindings: power: reset: add yaml bindings for LinkStation power off
Add Linkstation poweroff bindings documentation.
Signed-off-by Daniel González Cabanelas <[email protected]>
--- .../power/reset/linkstation-poweroff.yaml | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/reset/linkstation-poweroff.yaml
Documentation/devicetree/bindings/power/reset/linkstation-poweroff.yaml new file +42 -0
@@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/linkstation-poweroff.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Buffalo Linkstation poweroff driver + +maintainers: + - Daniel González Cabanelas <[email protected]> + +description: | + This driver is used to add the power off function to some Buffalo + LinkStations (ARM MVEBU boards). They use a LED output pin at the + ethernet PHY to inform the board if the power off operation must be + performed after restarting. + + When the power-off handler is called, the ethernet PHY LED2 ouptut is + set to OFF. If the restart command is executed then the PHY LED2 output + is asserted to ON. + +properties: + compatible: + const: linkstation,power-off + + phy-handle,led: + description: Phandle to a node of the ethernet PHY used for the power + function. If this optional property is not specified, then the first + PHY found in the MDIO bus will be used. + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + +additionalProperties: false + +examples: + - | + poweroff { + compatible = "linkstation,power-off"; + phy-handle,led = <ðphy0>; + };
Signature · 1 line
2.26.2
Hi,
Quoted 4 lines · Daniel González Cabanelas
Add Linkstation poweroff bindings documentation.
Signed-off-by Daniel González Cabanelas <[email protected]>---
Thanks for the patch.
DT bindings need to be CC'd to [email protected] and to Rob Herring. Also please Cc me ([email protected]). I will not merge this without an explicit Acked-by from Rob.
-- Sebastian
Quoted 58 lines
.../power/reset/linkstation-poweroff.yaml | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/reset/linkstation-poweroff.yamlDocumentation/devicetree/bindings/power/reset/linkstation-poweroff.yaml new file +42
-0@@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/linkstation-poweroff.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Buffalo Linkstation poweroff driver + +maintainers: + - Daniel González Cabanelas <[email protected]> + +description: | + This driver is used to add the power off function to some Buffalo + LinkStations (ARM MVEBU boards). They use a LED output pin at the + ethernet PHY to inform the board if the power off operation must be + performed after restarting. + + When the power-off handler is called, the ethernet PHY LED2 ouptut is + set to OFF. If the restart command is executed then the PHY LED2 output + is asserted to ON. + +properties: + compatible: + const: linkstation,power-off + + phy-handle,led: + description: Phandle to a node of the ethernet PHY used for the power + function. If this optional property is not specified, then the first + PHY found in the MDIO bus will be used. + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + +additionalProperties: false + +examples: + - | + poweroff { + compatible = "linkstation,power-off"; + phy-handle,led = <ðphy0>; + };Signature · 1 line
2.26.2