sata io freeze, 2.6.18 and also 2.6.24 [POSSIBLE SOLUTION]
hi luis,
glad that it worked - but let us better call this a possible workaround, not a solution.
mind that you loose lots of performance with this, because all i/o is handled by the cpu now.
Quoted 2 lines
If everything goes well, I'll reduce the command line in order to narrow the problem further down.
yes, please!
regards
roland
Quoted 104 lines
-----Ursprüngliche Nachricht-----
Von: "Luis Sousa" <[email protected]>
Gesendet: 12.04.08 17:34:39
An: [email protected]
CC: [email protected]
Betreff: Re: sata io freeze, 2.6.18 and also 2.6.24 [POSSIBLE SOLUTION]Hello all,
Thanks to valuable help from roland, I was able to boot with the following options:
``nosmp ide=nodma libata.dma=0''
after what I ran an agressive stability test for a while, with no problem whatsoever. Maybe it's too soon to say, but I have a good feeling this time. It seems roland figured it out.
If everything goes well, I'll reduce the command line in order to narrow the problem further down.
(and indeed, this is a hyper-threading single core CPU)
Sincerely,
--
Luis Sousa--- [email protected] escreveu:
Quoted 59 lines
did you try UP-kernel or tried booting with "nosmp" and does that make any difference ?
Quoted 7 lines
This is a 2-processor CPU:
# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) 4 CPU 3.00GHzmost likely this just "appears" as 2-way processor , but iŽm quite sure this is just a single-core CPU, but with HyperThreading enabled.
regards
rolandList: linux-kernel Subject: sata io freeze, 2.6.18 and also 2.6.24 From: Luis Sousa <ls.luis_sousa () yahoo ! com ! br> Date: 2008-03-28 22:24:48 Message-ID: 739784.81690.qm () web46009 ! mail ! sp1 ! yahoo ! com[Download message RAW]
Hello,
I've been having consistent hard system freezes for a long time, every 2 days or so, and finally decided to move to the most recent stable kernel. Unfortunatelly that didn't fix it. The freezes seem to be io-related; they started since I moved my drive to sata. They seem to happen mostly when there's an io-intensive operation, like extracting a big archive; a reboot is needed.
Nothing ever shows up in the logs.
I'm using the following drive:
ATA device, with non-removable media
Model Number: MAXTOR STM3160215AS Serial Number: 6RA2TMJ4 Firmware Revision: 3.AADLinux localhost 2.6.24.4 #4 SMP Fri Mar 28 14:51:50 BRT 2008 i686 GNU/Linux
This is a 2-processor CPU:
# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) 4 CPU 3.00GHz stepping : 9 cpu MHz : 3013.697 cache size : 1024 KBQuoted 10 lines
(same goes for processor : 1)
Sincerely,
--
Luis Sousa
_____________________________________________________________________
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071&distributionid=000000000066
Quoted 4 lines
Abra sua conta no Yahoo! Mail, o único sem limite de espaço para armazenamento!
http://br.mail.yahoo.com/
_________________________________________________________________________
Mit der Gruppen-SMS von WEB.DE FreeMail können Sie eine SMS an alle Freunde gleichzeitig schicken: http://freemail.web.de/features/?mc=021179
Re: sata io freeze, 2.6.18 and also 2.6.24 [the real culprit]
Hello,
I did as planned, and I dare to say now, with relative certainty, that the reason I have had all these instabilities, including application crashes, sneaky corrupt backups, and the dreaded freezes every other day was SMP and HyperThreading not working properly. Booting with nosmp gives me a stable system. Booting only with the sata-related arguments had the system freeze overnight.
Sincerely,
--
Luis Sousa
--- [email protected] escreveu:
Quoted 59 lines
hi luis,
glad that it worked - but let us better call this a possible workaround, not a solution.
mind that you loose lots of performance with this, because all i/o is handled by the cpu now.
Quoted 2 lines
If everything goes well, I'll reduce the command line in order to narrow the problem further down.
yes, please!
regards
rolandQuoted 24 lines
-----Ursprüngliche Nachricht-----
Von: "Luis Sousa" <[email protected]>
Gesendet: 12.04.08 17:34:39
An: [email protected]
CC: [email protected]
Betreff: Re: sata io freeze, 2.6.18 and also 2.6.24 [POSSIBLE SOLUTION]Hello all,
Thanks to valuable help from roland, I was able to boot with the following options:
``nosmp ide=nodma libata.dma=0''
after what I ran an agressive stability test for a while, with no problem whatsoever. Maybe it's too soon to say, but I have a good feeling this time. It seems roland figured it out.
If everything goes well, I'll reduce the command line in order to narrow the problem further down.
Quoted 9 lines
(and indeed, this is a hyper-threading single core CPU)
Sincerely,
--
Luis Sousa--- [email protected] escreveu:
Quoted 1 line
did you try UP-kernel or tried booting with "nosmp" and does that make any difference
?
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines
This is a 2-processor CPU:
# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
Quoted 55 lines
Quoted 1 line
Quoted 1 line
most likely this just "appears" as 2-way processor , but i´m quite sure this is just
a
Quoted 53 lines
Quoted 53 lines
single-core CPU, but with HyperThreading enabled.
regards
rolandList: linux-kernel Subject: sata io freeze, 2.6.18 and also 2.6.24 From: Luis Sousa <ls.luis_sousa () yahoo ! com ! br> Date: 2008-03-28 22:24:48 Message-ID: 739784.81690.qm () web46009 ! mail ! sp1 ! yahoo ! com[Download message RAW]
Hello,
I've been having consistent hard system freezes for a long time, every 2 days or so, and finally decided to move to the most recent stable kernel. Unfortunatelly that didn't fix it. The freezes seem to be io-related; they started since I moved my drive to sata. They seem to happen mostly when there's an io-intensive operation, like extracting a big archive; a reboot is needed.
Nothing ever shows up in the logs.
I'm using the following drive:
ATA device, with non-removable media
Model Number: MAXTOR STM3160215AS Serial Number: 6RA2TMJ4 Firmware Revision: 3.AADLinux localhost 2.6.24.4 #4 SMP Fri Mar 28 14:51:50 BRT 2008 i686 GNU/Linux
This is a 2-processor CPU:
# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) 4 CPU 3.00GHz stepping : 9 cpu MHz : 3013.697 cache size : 1024 KB(same goes for processor : 1)
Sincerely,
--
Luis Sousa
Abra sua conta no Yahoo! Mail, o único sem limite de espaço para armazenamento!
http://br.mail.yahoo.com/