Devicetree schema

index 97ba6b79834c..a20ac26aa2f5 100644
@@ -15,6 +15,7 @@
 *.bin
 *.bz2
 *.c.[012]*.*
+*.dt.yaml
 *.dtb
 *.dtb.S
 *.dwo

index 2ca77ad0f238..9786957c6a35 100644
@@ -2,7 +2,7 @@
 # Makefile for Sphinx documentation
 #
 
-subdir-y :=
+subdir-y := devicetree/bindings/
 
 # You can set these variables from the command line.
 SPHINXBUILD   = sphinx-build

new file mode 100644
index 000000000000..d9194c02dd08
@@ -0,0 +1 @@
+*.example.dts

new file mode 100644
index 000000000000..ee0110dd8131
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+DT_DOC_CHECKER ?= dt-doc-validate
+DT_EXTRACT_EX ?= dt-extract-example
+DT_MK_SCHEMA ?= dt-mk-schema
+DT_MK_SCHEMA_FLAGS := $(if $(DT_SCHEMA_FILES), -u)
+
+quiet_cmd_chk_binding = CHKDT   $<
+      cmd_chk_binding = (set -e; \
+                         $(DT_DOC_CHECKER) $< ; \
+                         mkdir -p $(dir $@) ; \
+                         $(DT_EXTRACT_EX) $< > $@ )
+
+$(obj)/%.example.dts: $(src)/%.yaml FORCE
+	$(call if_changed,chk_binding)
+
+DT_TMP_SCHEMA := .schema.yaml.tmp
+extra-y += $(DT_TMP_SCHEMA)
+
+quiet_cmd_mk_schema = SCHEMA  $@
+      cmd_mk_schema = mkdir -p $(obj); \
+                      rm -f $@; \
+                      $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $<
+
+DT_DOCS = $(shell cd $(srctree)/$(src) && find * -name '*.yaml')
+DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS))
+
+extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
+extra-y += $(patsubst $(src)/%.yaml,%.example.dtb, $(DT_SCHEMA_FILES))
+
+$(obj)/$(DT_TMP_SCHEMA): $(addprefix $(obj)/,$(patsubst $(src)/%.yaml,%.example.dtb, $(DT_SCHEMA_FILES)))
+
+$(obj)/$(DT_TMP_SCHEMA): $(addprefix $(srctree)/, $(DT_SCHEMA_FILES)) FORCE
+	$(call if_changed,mk_schema)

index 2f36db897895..ff59adf43300 100644
@@ -1232,10 +1232,13 @@ ifneq ($(dtstree),)
 %.dtb: prepare3 scripts_dtc
 	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
 
-PHONY += dtbs dtbs_install
+PHONY += dtbs dtbs_install dt_binding_check
 dtbs: prepare3 scripts_dtc
 	$(Q)$(MAKE) $(build)=$(dtstree)
 
+dtbs_check: prepare3 dt_binding_check
+	$(Q)$(MAKE) $(build)=$(dtstree) CHECK_DTBS=1
+
 dtbs_install:
 	$(Q)$(MAKE) $(dtbinst)=$(dtstree)
 

@@ -1249,6 +1252,9 @@ PHONY += scripts_dtc
 scripts_dtc: scripts_basic
 	$(Q)$(MAKE) $(build)=scripts/dtc
 
+dt_binding_check: scripts_dtc
+	$(Q)$(MAKE) $(build)=Documentation/devicetree/bindings
+
 # ---------------------------------------------------------------------------
 # Modules
 

@@ -1611,7 +1617,8 @@ clean: $(clean-dirs)
 	$(call cmd,rmfiles)
 	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
 		\( -name '*.[aios]' -o -name '*.ko' -o -name '.*.cmd' \
-		-o -name '*.ko.*' -o -name '*.dtb' -o -name '*.dtb.S' \
+		-o -name '*.ko.*' \
+		-o -name '*.dtb' -o -name '*.dtb.S' -o -name '*.dt.yaml' \
 		-o -name '*.dwo' -o -name '*.lst' \
 		-o -name '*.su'  \
 		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \

index 8fe4468f9bda..d1c5630ba24c 100644
@@ -61,6 +61,11 @@ real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))
 extra-y				+= $(dtb-y)
 extra-$(CONFIG_OF_ALL_DTBS)	+= $(dtb-)
 
+ifneq ($(CHECK_DTBS),)
+extra-y += $(patsubst %.dtb,%.dt.yaml, $(dtb-y))
+extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtb,%.dt.yaml, $(dtb-))
+endif
+
 # Add subdir path
 
 extra-y		:= $(addprefix $(obj)/,$(extra-y))

@@ -284,13 +289,28 @@ $(obj)/%.dtb.S: $(obj)/%.dtb FORCE
 quiet_cmd_dtc = DTC     $@
 cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
 	$(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
-	$(DTC) -O dtb -o $@ -b 0 \
+	$(DTC) -O $(2) -o $@ -b 0 \
 		$(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \
 		-d $(depfile).dtc.tmp $(dtc-tmp) ; \
 	cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
 
 $(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE
-	$(call if_changed_dep,dtc)
+	$(call if_changed_dep,dtc,dtb)
+
+DT_CHECKER ?= dt-validate
+DT_BINDING_DIR := Documentation/devicetree/bindings
+DT_TMP_SCHEMA := $(objtree)/$(DT_BINDING_DIR)/.schema.yaml.tmp
+
+quiet_cmd_dtb_check =	CHECK  $@
+      cmd_dtb_check =	$(DT_CHECKER) -p $(DT_TMP_SCHEMA) $@ ;
+
+define rule_dtc_dt_yaml
+	$(call cmd_and_fixdep,dtc,yaml)		\
+	$(call echo-cmd,dtb_check) $(cmd_dtb_check)
+endef
+
+$(obj)/%.dt.yaml: $(src)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE
+	$(call if_changed_rule,dtc_dt_yaml)
 
 dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
 

new file mode 100644
index 000000000000..593567f7c6f4
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+# All the top-level keys are standard json-schema keywords except for
+# 'maintainers' and 'select'
+
+# $id is a unique idenifier based on the filename. There may or may not be a
+# file present at the URL.
+$id: "http://devicetree.org/schemas/example-schema.yaml#"
+# $schema is the meta-schema this schema should be validated with.
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: An example schema annotated with jsonschema details
+
+maintainers:
+  - Rob Herring <[email protected]>
+
+description: |
+  A more detailed multi-line description of the binding.
+
+  Details about the hardware device and any links to datasheets can go here.
+
+  Literal blocks are marked with the '|' at the beginning. The end is marked by
+  indentation less than the first line of the literal block. Lines also cannot
+  begin with a tab character.
+
+select: false
+  # 'select' is a schema applied to a DT node to determine if this binding
+  # schema should be applied to the node. It is optional and by default the
+  # possible compatible strings are extracted and used to match.
+
+  # In this case, a 'false' schema will never match.
+
+properties:
+  # A dictionary of DT properties for this binding schema
+  compatible:
+    # More complicated schema can use oneOf (XOR), anyOf (OR), or allOf (AND)
+    # to handle different conditions.
+    # In this case, it's needed to handle a variable number of values as there
+    # isn't another way to express a constraint of the last string value.
+    # The boolean schema must be a list of schemas.
+    oneOf:
+      - items:
+          # items is a list of possible values for the property. The number of
+          # values is determined by the number of elements in the list.
+          # Order in lists is significant, order in dicts is not
+          # Must be one of the 1st enums followed by the 2nd enum
+          #
+          # Each element in items should be 'enum' or 'const'
+          - enum:
+              - vendor,soc4-ip
+              - vendor,soc3-ip
+              - vendor,soc2-ip
+          - enum:
+              - vendor,soc1-ip
+        # additionalItems being false is implied
+        # minItems/maxItems equal to 2 is implied
+      - items:
+          # 'const' is just a special case of an enum with a single possible value
+          - const: vendor,soc1-ip
+
+  reg:
+    # The core schema already checks that reg values are numbers, so device
+    # specific schema don't need to do those checks.
+    # The description of each element defines the order and implicitly defines
+    # the number of reg entries.
+    items:
+      - description: core registers
+      - description: aux registers
+    # minItems/maxItems equal to 2 is implied
+
+  reg-names:
+    # The core schema enforces this is a string array
+    items:
+      - const: core
+      - const: aux
+
+  clocks:
+    # Cases that have only a single entry just need to express that with maxItems
+    maxItems: 1
+    description: bus clock
+
+  clock-names:
+    items:
+      - const: bus
+
+  interrupts:
+    # Either 1 or 2 interrupts can be present
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: tx or combined interrupt
+      - description: rx interrupt
+    description:
+      A variable number of interrupts warrants a description of what conditions
+      affect the number of interrupts. Otherwise, descriptions on standard
+      properties are not necessary.
+
+  interrupt-names:
+    # minItems must be specified here because the default would be 2
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: tx irq
+      - const: rx irq
+
+  # Property names starting with '#' must be quoted
+  '#interrupt-cells':
+    # A simple case where the value must always be '2'.
+    # The core schema handles that this must be a single integer.
+    const: 2
+
+  interrupt-controller: true
+    # The core checks this is a boolean, so just have to list it here to be
+    # valid for this binding.
+
+  clock-frequency:
+    # The type is set in the core schema. Per device schema only need to set
+    # constraints on the possible values.
+    minimum: 100
+    maximum: 400000
+    # The value that should be used if the property is not present
+    default: 200
+
+  foo-gpios:
+    maxItems: 1
+    description: A connection of the 'foo' gpio line.
+
+  vendor,int-property:
+    description: Vendor specific properties must have a description
+    # 'allOf' is the json-schema way of subclassing a schema. Here the base
+    # type schema is referenced and then additional constraints on the values
+    # are added.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [2, 4, 6, 8, 10]
+
+  vendor,bool-property:
+    description: Vendor specific properties must have a description
+    # boolean properties is one case where the json-schema 'type' keyword
+    # can be used directly
+    type: boolean
+
+  vendor,string-array-property:
+    description: Vendor specific properties should reference a type in the
+      core schema.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/stringarray
+      - items:
+          - enum: [ foo, bar ]
+          - enum: [ baz, boo ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+
+examples:
+  # Examples are now compiled with dtc
+  - |
+    node@1000 {
+          compatible = "vendor,soc4-ip", "vendor,soc1-ip";
+          reg = <0x1000 0x80>,
+                <0x3000 0x80>;
+          reg-names = "core", "aux";
+          interrupts = <10>;
+          interrupt-controller;
+    };

130 lines not on this page · raw message

deleted file mode 100644
index 6ab001fa1ed4..000000000000
@@ -1,190 +0,0 @@
-This is a list of trivial i2c devices that have simple device tree
-bindings, consisting only of a compatible field, an address and
-possibly an interrupt line.
-
-If a device needs more specific bindings, such as properties to
-describe some aspect of it, there needs to be a specific binding
-document for it just like any other devices.
-
-
-Compatible		Vendor / Chip
-==========		=============
-abracon,abb5zes3		AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface
-ad,ad7414		SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin
-ad,adm9240		ADM9240:  Complete System Hardware Monitor for uProcessor-Based Systems
-adi,adt7461		+/-1C TDM Extended Temp Range I.C
-adt7461			+/-1C TDM Extended Temp Range I.C
-adi,adt7473		+/-1C TDM Extended Temp Range I.C
-adi,adt7475		+/-1C TDM Extended Temp Range I.C
-adi,adt7476		+/-1C TDM Extended Temp Range I.C
-adi,adt7490		+/-1C TDM Extended Temp Range I.C
-adi,adxl345		Three-Axis Digital Accelerometer
-adi,adxl346		Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too)
-ams,iaq-core		AMS iAQ-Core VOC Sensor
-at,24c08		i2c serial eeprom  (24cxx)
-atmel,at97sc3204t	i2c trusted platform module (TPM)
-capella,cm32181		CM32181: Ambient Light Sensor
-capella,cm3232		CM3232: Ambient Light Sensor
-dallas,ds1374		I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
-dallas,ds1631		High-Precision Digital Thermometer
-dallas,ds1672		Dallas DS1672 Real-time Clock
-dallas,ds1682		Total-Elapsed-Time Recorder with Alarm
-dallas,ds1775		Tiny Digital Thermometer and Thermostat
-dallas,ds3232		Extremely Accurate I²C RTC with Integrated Crystal and SRAM
-dallas,ds4510		CPU Supervisor with Nonvolatile Memory and Programmable I/O
-dallas,ds75		Digital Thermometer and Thermostat
-devantech,srf02		Devantech SRF02 ultrasonic ranger in I2C mode
-devantech,srf08		Devantech SRF08 ultrasonic ranger
-devantech,srf10		Devantech SRF10 ultrasonic ranger
-dlg,da9053		DA9053: flexible system level PMIC with multicore support
-dlg,da9063		DA9063: system PMIC for quad-core application processors
-domintech,dmard09	DMARD09: 3-axis Accelerometer
-domintech,dmard10	DMARD10: 3-axis Accelerometer
-epson,rx8010		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
-epson,rx8581		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
-emmicro,em3027		EM Microelectronic EM3027 Real-time Clock
-fsl,mag3110		MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
-fsl,mma7660		MMA7660FC: 3-Axis Orientation/Motion Detection Sensor
-fsl,mma8450		MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
-fsl,mpl3115		MPL3115: Absolute Digital Pressure Sensor
-fsl,mpr121		MPR121: Proximity Capacitive Touch Sensor Controller
-fsl,sgtl5000		SGTL5000: Ultra Low-Power Audio Codec
-gmt,g751		G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
-infineon,slb9635tt	Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
-infineon,slb9645tt	Infineon SLB9645 I2C TPM (new protocol, max 400khz)
-infineon,tlv493d-a1b6	Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
-isil,isl1208		Intersil ISL1208 Low Power RTC with Battery Backed SRAM
-isil,isl1218		Intersil ISL1218 Low Power RTC with Battery Backed SRAM
-isil,isl12022		Intersil ISL12022 Real-time Clock
-isil,isl29028		Intersil ISL29028 Ambient Light and Proximity Sensor
-isil,isl29030		Intersil ISL29030 Ambient Light and Proximity Sensor
-maxim,ds1050		5 Bit Programmable, Pulse-Width Modulator
-maxim,max1237		Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
-maxim,max6621		PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion
-maxim,max6625		9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
-mcube,mc3230		mCube 3-axis 8-bit digital accelerometer
-memsic,mxc6225		MEMSIC 2-axis 8-bit digital accelerometer
-microchip,mcp4017-502	Microchip 7-bit Single I2C Digital POT (5k)
-microchip,mcp4017-103	Microchip 7-bit Single I2C Digital POT (10k)
-microchip,mcp4017-503	Microchip 7-bit Single I2C Digital POT (50k)
-microchip,mcp4017-104	Microchip 7-bit Single I2C Digital POT (100k)
-microchip,mcp4018-502	Microchip 7-bit Single I2C Digital POT (5k)
-microchip,mcp4018-103	Microchip 7-bit Single I2C Digital POT (10k)
-microchip,mcp4018-503	Microchip 7-bit Single I2C Digital POT (50k)
-microchip,mcp4018-104	Microchip 7-bit Single I2C Digital POT (100k)
-microchip,mcp4019-502	Microchip 7-bit Single I2C Digital POT (5k)
-microchip,mcp4019-103	Microchip 7-bit Single I2C Digital POT (10k)
-microchip,mcp4019-503	Microchip 7-bit Single I2C Digital POT (50k)
-microchip,mcp4019-104	Microchip 7-bit Single I2C Digital POT (100k)
-microchip,mcp4531-502	Microchip 7-bit Single I2C Digital Potentiometer (5k)
-microchip,mcp4531-103	Microchip 7-bit Single I2C Digital Potentiometer (10k)
-microchip,mcp4531-503	Microchip 7-bit Single I2C Digital Potentiometer (50k)
-microchip,mcp4531-104	Microchip 7-bit Single I2C Digital Potentiometer (100k)
-microchip,mcp4532-502	Microchip 7-bit Single I2C Digital Potentiometer (5k)
-microchip,mcp4532-103	Microchip 7-bit Single I2C Digital Potentiometer (10k)
-microchip,mcp4532-503	Microchip 7-bit Single I2C Digital Potentiometer (50k)
-microchip,mcp4532-104	Microchip 7-bit Single I2C Digital Potentiometer (100k)
-microchip,mcp4541-502	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k)
-microchip,mcp4541-103	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k)
-microchip,mcp4541-503	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k)
-microchip,mcp4541-104	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k)
-microchip,mcp4542-502	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k)
-microchip,mcp4542-103	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k)
-microchip,mcp4542-503	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k)
-microchip,mcp4542-104	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k)
-microchip,mcp4551-502	Microchip 8-bit Single I2C Digital Potentiometer (5k)
-microchip,mcp4551-103	Microchip 8-bit Single I2C Digital Potentiometer (10k)
-microchip,mcp4551-503	Microchip 8-bit Single I2C Digital Potentiometer (50k)
-microchip,mcp4551-104	Microchip 8-bit Single I2C Digital Potentiometer (100k)
-microchip,mcp4552-502	Microchip 8-bit Single I2C Digital Potentiometer (5k)
-microchip,mcp4552-103	Microchip 8-bit Single I2C Digital Potentiometer (10k)
-microchip,mcp4552-503	Microchip 8-bit Single I2C Digital Potentiometer (50k)
-microchip,mcp4552-104	Microchip 8-bit Single I2C Digital Potentiometer (100k)
-microchip,mcp4561-502	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k)
-microchip,mcp4561-103	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k)
-microchip,mcp4561-503	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k)
-microchip,mcp4561-104	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k)
-microchip,mcp4562-502	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k)
-microchip,mcp4562-103	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k)
-microchip,mcp4562-503	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k)
-microchip,mcp4562-104	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k)
-microchip,mcp4631-502	Microchip 7-bit Dual I2C Digital Potentiometer (5k)
-microchip,mcp4631-103	Microchip 7-bit Dual I2C Digital Potentiometer (10k)
-microchip,mcp4631-503	Microchip 7-bit Dual I2C Digital Potentiometer (50k)
-microchip,mcp4631-104	Microchip 7-bit Dual I2C Digital Potentiometer (100k)
-microchip,mcp4632-502	Microchip 7-bit Dual I2C Digital Potentiometer (5k)
-microchip,mcp4632-103	Microchip 7-bit Dual I2C Digital Potentiometer (10k)
-microchip,mcp4632-503	Microchip 7-bit Dual I2C Digital Potentiometer (50k)
-microchip,mcp4632-104	Microchip 7-bit Dual I2C Digital Potentiometer (100k)
-microchip,mcp4641-502	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k)
-microchip,mcp4641-103	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k)
-microchip,mcp4641-503	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k)
-microchip,mcp4641-104	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k)
-microchip,mcp4642-502	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k)
-microchip,mcp4642-103	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k)
-microchip,mcp4642-503	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k)
-microchip,mcp4642-104	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k)
-microchip,mcp4651-502	Microchip 8-bit Dual I2C Digital Potentiometer (5k)
-microchip,mcp4651-103	Microchip 8-bit Dual I2C Digital Potentiometer (10k)
-microchip,mcp4651-503	Microchip 8-bit Dual I2C Digital Potentiometer (50k)
-microchip,mcp4651-104	Microchip 8-bit Dual I2C Digital Potentiometer (100k)
-microchip,mcp4652-502	Microchip 8-bit Dual I2C Digital Potentiometer (5k)
-microchip,mcp4652-103	Microchip 8-bit Dual I2C Digital Potentiometer (10k)
-microchip,mcp4652-503	Microchip 8-bit Dual I2C Digital Potentiometer (50k)
-microchip,mcp4652-104	Microchip 8-bit Dual I2C Digital Potentiometer (100k)
-microchip,mcp4661-502	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k)
-microchip,mcp4661-103	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k)
-microchip,mcp4661-503	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k)
-microchip,mcp4661-104	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k)
-microchip,mcp4662-502	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k)
-microchip,mcp4662-103	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k)
-microchip,mcp4662-503	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k)
-microchip,mcp4662-104	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k)
-microchip,tc654		PWM Fan Speed Controller With Fan Fault Detection
-microchip,tc655		PWM Fan Speed Controller With Fan Fault Detection
-microcrystal,rv3029	Real Time Clock Module with I2C-Bus
-miramems,da226		MiraMEMS DA226 2-axis 14-bit digital accelerometer
-miramems,da280		MiraMEMS DA280 3-axis 14-bit digital accelerometer
-miramems,da311		MiraMEMS DA311 3-axis 12-bit digital accelerometer
-national,lm63		Temperature sensor with integrated fan control
-national,lm75		I2C TEMP SENSOR
-national,lm80		Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
-national,lm85		Temperature sensor with integrated fan control
-national,lm92		±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface
-nuvoton,npct501		i2c trusted platform module (TPM)
-nuvoton,npct601		i2c trusted platform module (TPM2)
-nuvoton,w83773g		Nuvoton Temperature Sensor
-nxp,pca9556		Octal SMBus and I2C registered interface
-nxp,pca9557		8-bit I2C-bus and SMBus I/O port with reset
-nxp,pcf2127		Real-time clock
-nxp,pcf2129		Real-time clock
-nxp,pcf8523		Real-time Clock
-nxp,pcf8563		Real-time clock/calendar
-nxp,pcf85063		Tiny Real-Time Clock
-oki,ml86v7667		OKI ML86V7667 video decoder
-ovti,ov5642		OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus
-pericom,pt7c4338	Real-time Clock Module
-plx,pex8648		48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
-pulsedlight,lidar-lite-v2	Pulsedlight LIDAR range-finding sensor
-ricoh,r2025sd		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
-ricoh,r2221tl		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
-ricoh,rs5c372a		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
-ricoh,rs5c372b		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
-ricoh,rv5c386		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
-ricoh,rv5c387a		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
-samsung,24ad0xd1	S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
-sgx,vz89x		SGX Sensortech VZ89X Sensors
-sii,s35390a		2-wire CMOS real-time clock
-silabs,si7020		Relative Humidity and Temperature Sensors
-skyworks,sky81452	Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
-st,24c256		i2c serial eeprom  (24cxx)
-taos,tsl2550		Ambient Light Sensor with SMBUS/Two Wire Serial Interface
-ti,ads7828		8-Channels, 12-bit ADC
-ti,ads7830		8-Channels, 8-bit ADC
-ti,amc6821		Temperature Monitoring and Fan Control
-ti,tsc2003		I2C Touch-Screen Controller
-ti,tmp102		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
-ti,tmp103		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
-ti,tmp275		Digital Temperature Sensor
-winbond,w83793		Winbond/Nuvoton H/W Monitor
-winbond,wpct301		i2c trusted platform module (TPM)

392 lines not on this page · raw message

deleted file mode 100644
index 2c28f1d12f45..000000000000
@@ -1,11 +0,0 @@
-Altera SOCFPGA Clock Manager
-
-Required properties:
-- compatible : "altr,clk-mgr"
-- reg : Should contain base address and length for Clock Manager
-
-Example:
-	 clkmgr@ffd04000 {
-		compatible = "altr,clk-mgr";
-		reg = <0xffd04000 0x1000>;
-	};

new file mode 100644
index 000000000000..e4131fa42b26
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/altera/socfpga-clk-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera SOCFPGA Clock Manager
+
+maintainers:
+  - Dinh Nguyen <[email protected]>
+
+description: test
+
+properties:
+  compatible:
+    items:
+      - const: altr,clk-mgr
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+examples:
+  - |
+    clkmgr@ffd04000 {
+      compatible = "altr,clk-mgr";
+      reg = <0xffd04000 0x1000>;
+    };
+
+...

deleted file mode 100644
index 38a05562d1d2..000000000000
@@ -1,46 +0,0 @@
-Device-Tree bindings for i2c gpio driver
-
-Required properties:
-	- compatible = "i2c-gpio";
-	- sda-gpios: gpio used for the sda signal, this should be flagged as
-	  active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
-	  from <dt-bindings/gpio/gpio.h> since the signal is by definition
-	  open drain.
-	- scl-gpios: gpio used for the scl signal, this should be flagged as
-	  active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
-	  from <dt-bindings/gpio/gpio.h> since the signal is by definition
-	  open drain.
-
-Optional properties:
-	- i2c-gpio,scl-output-only: scl as output only
-	- i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform)
-	- i2c-gpio,timeout-ms: timeout to get data
-
-Deprecated properties, do not use in new device tree sources:
-	- gpios: sda and scl gpio, alternative for {sda,scl}-gpios
-	- i2c-gpio,sda-open-drain: this means that something outside of our
-	  control has put the GPIO line used for SDA into open drain mode, and
-	  that something is not the GPIO chip. It is essentially an
-	  inconsistency flag.
-	- i2c-gpio,scl-open-drain: this means that something outside of our
-	  control has put the GPIO line used for SCL into open drain mode, and
-	  that something is not the GPIO chip. It is essentially an
-	  inconsistency flag.
-
-Example nodes:
-
-#include <dt-bindings/gpio/gpio.h>
-
-i2c@0 {
-	compatible = "i2c-gpio";
-	sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	rv3029c2@56 {
-		compatible = "rv3029c2";
-		reg = <0x56>;
-	};
-};

73 lines not on this page · raw message

deleted file mode 100644
index 68301b77e854..000000000000
@@ -1,112 +0,0 @@
-* ARM architected timer
-
-ARM cores may have a per-core architected timer, which provides per-cpu timers,
-or a memory mapped architected timer, which provides up to 8 frames with a
-physical and optional virtual timer per frame.
-
-The per-core architected timer is attached to a GIC to deliver its
-per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC
-to deliver its interrupts via SPIs.
-
-** CP15 Timer node properties:
-
-- compatible : Should at least contain one of
-	"arm,armv7-timer"
-	"arm,armv8-timer"
-
-- interrupts : Interrupt list for secure, non-secure, virtual and
-  hypervisor timers, in that order.
-
-- clock-frequency : The frequency of the main counter, in Hz. Should be present
-  only where necessary to work around broken firmware which does not configure
-  CNTFRQ on all CPUs to a uniform correct value. Use of this property is
-  strongly discouraged; fix your firmware unless absolutely impossible.
-
-- always-on : a boolean property. If present, the timer is powered through an
-  always-on power domain, therefore it never loses context.
-
-- fsl,erratum-a008585 : A boolean property. Indicates the presence of
-  QorIQ erratum A-008585, which says that reading the counter is
-  unreliable unless the same value is returned by back-to-back reads.
-  This also affects writes to the tval register, due to the implicit
-  counter read.
-
-- hisilicon,erratum-161010101 : A boolean property. Indicates the
-  presence of Hisilicon erratum 161010101, which says that reading the
-  counters is unreliable in some cases, and reads may return a value 32
-  beyond the correct value. This also affects writes to the tval
-  registers, due to the implicit counter read.
-
-** Optional properties:
-
-- arm,cpu-registers-not-fw-configured : Firmware does not initialize
-  any of the generic timer CPU registers, which contain their
-  architecturally-defined reset values. Only supported for 32-bit
-  systems which follow the ARMv7 architected reset values.
-
-- arm,no-tick-in-suspend : The main counter does not tick when the system is in
-  low-power system suspend on some SoCs. This behavior does not match the
-  Architecture Reference Manual's specification that the system counter "must
-  be implemented in an always-on power domain."
-
-
-Example:
-
-	timer {
-		compatible = "arm,cortex-a15-timer",
-			     "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-		clock-frequency = <100000000>;
-	};
-
-** Memory mapped timer node properties:
-
-- compatible : Should at least contain "arm,armv7-timer-mem".
-
-- clock-frequency : The frequency of the main counter, in Hz. Should be present
-  only when firmware has not configured the MMIO CNTFRQ registers.
-
-- reg : The control frame base address.
-
-Note that #address-cells, #size-cells, and ranges shall be present to ensure
-the CPU can address a frame's registers.
-
-A timer node has up to 8 frame sub-nodes, each with the following properties:
-
-- frame-number: 0 to 7.
-
-- interrupts : Interrupt list for physical and virtual timers in that order.
-  The virtual timer interrupt is optional.
-
-- reg : The first and second view base addresses in that order. The second view
-  base address is optional.
-
-- status : "disabled" indicates the frame is not available for use. Optional.
-
-Example:
-
-	timer@f0000000 {
-		compatible = "arm,armv7-timer-mem";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		reg = <0xf0000000 0x1000>;
-		clock-frequency = <50000000>;
-
-		frame@f0001000 {
-			frame-number = <0>
-			interrupts = <0 13 0x8>,
-				     <0 14 0x8>;
-			reg = <0xf0001000 0x1000>,
-			      <0xf0002000 0x1000>;
-		};
-
-		frame@f0003000 {
-			frame-number = <1>
-			interrupts = <0 15 0x8>;
-			reg = <0xf0003000 0x1000>;
-		};
-	};

103 lines not on this page · raw message

120 lines not on this page · raw message

deleted file mode 100644
index bdae3a818793..000000000000
@@ -1,27 +0,0 @@
-
-* ARM Global Timer
-	Cortex-A9 are often associated with a per-core Global timer.
-
-** Timer node required properties:
-
-- compatible : should contain
-	     * "arm,cortex-a5-global-timer" for Cortex-A5 global timers.
-	     * "arm,cortex-a9-global-timer" for Cortex-A9 global
-	         timers or any compatible implementation. Note: driver
-	         supports versions r2p0 and above.
-
-- interrupts : One interrupt to each core
-
-- reg : Specify the base address and the size of the GT timer
-	register window.
-
-- clocks : Should be phandle to a clock.
-
-Example:
-
-	timer@2c000600 {
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0x2c000600 0x20>;
-		interrupts = <1 13 0xf01>;
-		clocks = <&arm_periph_clk>;
-	};

46 lines not on this page · raw message

deleted file mode 100644
index b0198a1cf403..000000000000
@@ -1,490 +0,0 @@
-=================
-ARM CPUs bindings
-=================
-
-The device tree allows to describe the layout of CPUs in a system through
-the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
-defining properties for every cpu.
-
-Bindings for CPU nodes follow the Devicetree Specification, available from:
-
-https://www.devicetree.org/specifications/
-
-with updates for 32-bit and 64-bit ARM systems provided in this document.
-
-================================
-Convention used in this document
-================================
-
-This document follows the conventions described in the Devicetree
-Specification, with the addition:
-
-- square brackets define bitfields, eg reg[7:0] value of the bitfield in
-  the reg property contained in bits 7 down to 0
-
-=====================================
-cpus and cpu node bindings definition
-=====================================
-
-The ARM architecture, in accordance with the Devicetree Specification,
-requires the cpus and cpu nodes to be present and contain the properties
-described below.
-
-- cpus node
-
-	Description: Container of cpu nodes
-
-	The node name must be "cpus".
-
-	A cpus node must define the following properties:
-
-	- #address-cells
-		Usage: required
-		Value type: <u32>
-
-		Definition depends on ARM architecture version and
-		configuration:
-
-			# On uniprocessor ARM architectures previous to v7
-			  value must be 1, to enable a simple enumeration
-			  scheme for processors that do not have a HW CPU
-			  identification register.
-			# On 32-bit ARM 11 MPcore, ARM v7 or later systems
-			  value must be 1, that corresponds to CPUID/MPIDR
-			  registers sizes.
-			# On ARM v8 64-bit systems value should be set to 2,
-			  that corresponds to the MPIDR_EL1 register size.
-			  If MPIDR_EL1[63:32] value is equal to 0 on all CPUs
-			  in the system, #address-cells can be set to 1, since
-			  MPIDR_EL1[63:32] bits are not used for CPUs
-			  identification.
-	- #size-cells
-		Usage: required
-		Value type: <u32>
-		Definition: must be set to 0
-
-- cpu node
-
-	Description: Describes a CPU in an ARM based system
-
-	PROPERTIES
-
-	- device_type
-		Usage: required
-		Value type: <string>
-		Definition: must be "cpu"
-	- reg
-		Usage and definition depend on ARM architecture version and
-		configuration:
-
-			# On uniprocessor ARM architectures previous to v7
-			  this property is required and must be set to 0.
-
-			# On ARM 11 MPcore based systems this property is
-			  required and matches the CPUID[11:0] register bits.
-
-			  Bits [11:0] in the reg cell must be set to
-			  bits [11:0] in CPU ID register.
-
-			  All other bits in the reg cell must be set to 0.
-
-			# On 32-bit ARM v7 or later systems this property is
-			  required and matches the CPU MPIDR[23:0] register
-			  bits.
-
-			  Bits [23:0] in the reg cell must be set to
-			  bits [23:0] in MPIDR.
-
-			  All other bits in the reg cell must be set to 0.
-
-			# On ARM v8 64-bit systems this property is required
-			  and matches the MPIDR_EL1 register affinity bits.
-
-			  * If cpus node's #address-cells property is set to 2
-
-			    The first reg cell bits [7:0] must be set to
-			    bits [39:32] of MPIDR_EL1.
-
-			    The second reg cell bits [23:0] must be set to
-			    bits [23:0] of MPIDR_EL1.
-
-			  * If cpus node's #address-cells property is set to 1
-
-			    The reg cell bits [23:0] must be set to bits [23:0]
-			    of MPIDR_EL1.
-
-			  All other bits in the reg cells must be set to 0.
-
-	- compatible:
-		Usage: required
-		Value type: <string>
-		Definition: should be one of:
-			    "arm,arm710t"
-			    "arm,arm720t"
-			    "arm,arm740t"
-			    "arm,arm7ej-s"
-			    "arm,arm7tdmi"
-			    "arm,arm7tdmi-s"
-			    "arm,arm9es"
-			    "arm,arm9ej-s"
-			    "arm,arm920t"
-			    "arm,arm922t"
-			    "arm,arm925"
-			    "arm,arm926e-s"
-			    "arm,arm926ej-s"
-			    "arm,arm940t"
-			    "arm,arm946e-s"
-			    "arm,arm966e-s"
-			    "arm,arm968e-s"
-			    "arm,arm9tdmi"
-			    "arm,arm1020e"
-			    "arm,arm1020t"
-			    "arm,arm1022e"
-			    "arm,arm1026ej-s"
-			    "arm,arm1136j-s"
-			    "arm,arm1136jf-s"
-			    "arm,arm1156t2-s"
-			    "arm,arm1156t2f-s"
-			    "arm,arm1176jzf"
-			    "arm,arm1176jz-s"
-			    "arm,arm1176jzf-s"
-			    "arm,arm11mpcore"
-			    "arm,cortex-a5"
-			    "arm,cortex-a7"
-			    "arm,cortex-a8"
-			    "arm,cortex-a9"
-			    "arm,cortex-a12"
-			    "arm,cortex-a15"
-			    "arm,cortex-a17"
-			    "arm,cortex-a53"
-			    "arm,cortex-a57"
-			    "arm,cortex-a72"
-			    "arm,cortex-a73"
-			    "arm,cortex-m0"
-			    "arm,cortex-m0+"
-			    "arm,cortex-m1"
-			    "arm,cortex-m3"
-			    "arm,cortex-m4"
-			    "arm,cortex-r4"
-			    "arm,cortex-r5"
-			    "arm,cortex-r7"
-			    "brcm,brahma-b15"
-			    "brcm,brahma-b53"
-			    "brcm,vulcan"
-			    "cavium,thunder"
-			    "cavium,thunder2"
-			    "faraday,fa526"
-			    "intel,sa110"
-			    "intel,sa1100"
-			    "marvell,feroceon"
-			    "marvell,mohawk"
-			    "marvell,pj4a"
-			    "marvell,pj4b"
-			    "marvell,sheeva-v5"
-			    "nvidia,tegra132-denver"
-			    "nvidia,tegra186-denver"
-			    "nvidia,tegra194-carmel"
-			    "qcom,krait"
-			    "qcom,kryo"
-			    "qcom,kryo385"
-			    "qcom,scorpion"
-	- enable-method
-		Value type: <stringlist>
-		Usage and definition depend on ARM architecture version.
-			# On ARM v8 64-bit this property is required and must
-			  be one of:
-			     "psci"
-			     "spin-table"
-			# On ARM 32-bit systems this property is optional and
-			  can be one of:
-			    "actions,s500-smp"
-			    "allwinner,sun6i-a31"
-			    "allwinner,sun8i-a23"
-			    "allwinner,sun9i-a80-smp"
-			    "amlogic,meson8-smp"
-			    "amlogic,meson8b-smp"
-			    "arm,realview-smp"
-			    "brcm,bcm11351-cpu-method"
-			    "brcm,bcm23550"
-			    "brcm,bcm2836-smp"
-			    "brcm,bcm-nsp-smp"
-			    "brcm,brahma-b15"
-			    "marvell,armada-375-smp"
-			    "marvell,armada-380-smp"
-			    "marvell,armada-390-smp"
-			    "marvell,armada-xp-smp"
-			    "marvell,98dx3236-smp"
-			    "mediatek,mt6589-smp"
-			    "mediatek,mt81xx-tz-smp"
-			    "qcom,gcc-msm8660"
-			    "qcom,kpss-acc-v1"
-			    "qcom,kpss-acc-v2"
-			    "renesas,apmu"
-			    "renesas,r9a06g032-smp"
-			    "rockchip,rk3036-smp"
-			    "rockchip,rk3066-smp"
-			    "ste,dbx500-smp"
-
-	- cpu-release-addr
-		Usage: required for systems that have an "enable-method"
-		       property value of "spin-table".
-		Value type: <prop-encoded-array>
-		Definition:
-			# On ARM v8 64-bit systems must be a two cell
-			  property identifying a 64-bit zero-initialised
-			  memory location.
-
-	- qcom,saw
-		Usage: required for systems that have an "enable-method"
-		       property value of "qcom,kpss-acc-v1" or
-		       "qcom,kpss-acc-v2"
-		Value type: <phandle>
-		Definition: Specifies the SAW[1] node associated with this CPU.
-
-	- qcom,acc
-		Usage: required for systems that have an "enable-method"
-		       property value of "qcom,kpss-acc-v1" or
-		       "qcom,kpss-acc-v2"
-		Value type: <phandle>
-		Definition: Specifies the ACC[2] node associated with this CPU.
-
-	- cpu-idle-states
-		Usage: Optional
-		Value type: <prop-encoded-array>
-		Definition:
-			# List of phandles to idle state nodes supported
-			  by this cpu [3].
-
-	- capacity-dmips-mhz
-		Usage: Optional
-		Value type: <u32>
-		Definition:
-			# u32 value representing CPU capacity [4] in
-			  DMIPS/MHz, relative to highest capacity-dmips-mhz
-			  in the system.
-
-	- rockchip,pmu
-		Usage: optional for systems that have an "enable-method"
-		       property value of "rockchip,rk3066-smp"
-		       While optional, it is the preferred way to get access to
-		       the cpu-core power-domains.
-		Value type: <phandle>
-		Definition: Specifies the syscon node controlling the cpu core
-			    power domains.
-
-	- dynamic-power-coefficient
-		Usage: optional
-		Value type: <prop-encoded-array>
-		Definition: A u32 value that represents the running time dynamic
-			    power coefficient in units of uW/MHz/V^2. The
-			    coefficient can either be calculated from power
-			    measurements or derived by analysis.
-
-			    The dynamic power consumption of the CPU  is
-			    proportional to the square of the Voltage (V) and
-			    the clock frequency (f). The coefficient is used to
-			    calculate the dynamic power as below -
-
-			    Pdyn = dynamic-power-coefficient * V^2 * f
-
-			    where voltage is in V, frequency is in MHz.
-
-Example 1 (dual-cluster big.LITTLE system 32-bit):
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-		};
-
-		cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-		};
-
-		cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-		};
-	};
-
-Example 2 (Cortex-A8 uniprocessor 32-bit system):
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0x0>;
-		};
-	};
-
-Example 3 (ARM 926EJ-S uniprocessor 32-bit system):
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-			reg = <0x0>;
-		};
-	};
-
-Example 4 (ARM Cortex-A57 64-bit system):
-
-cpus {
-	#size-cells = <0>;
-	#address-cells = <2>;
-
-	cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x0>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x1>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@10000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10000>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@10001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10001>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@10100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@10101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100000000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x0>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100000001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x1>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100000100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100000101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100010000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10000>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100010001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10001>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100010100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	cpu@100010101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-};
-
---
-[1] arm/msm/qcom,saw2.txt
-[2] arm/msm/qcom,kpss-acc.txt
-[3] ARM Linux kernel documentation - idle states bindings
-    Documentation/devicetree/bindings/arm/idle-states.txt
-[4] ARM Linux kernel documentation - cpu capacity bindings
-    Documentation/devicetree/bindings/arm/cpu-capacity.txt

507 lines not on this page · raw message

deleted file mode 100644
index 13611a8199bb..000000000000
@@ -1,70 +0,0 @@
-* ARM Performance Monitor Units
-
-ARM cores often have a PMU for counting cpu and cache events like cache misses
-and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU
-representation in the device tree should be done as under:-
-
-Required properties:
-
-- compatible : should be one of
-	"apm,potenza-pmu"
-	"arm,armv8-pmuv3"
-	"arm,cortex-a73-pmu"
-	"arm,cortex-a72-pmu"
-	"arm,cortex-a57-pmu"
-	"arm,cortex-a53-pmu"
-	"arm,cortex-a35-pmu"
-	"arm,cortex-a17-pmu"
-	"arm,cortex-a15-pmu"
-	"arm,cortex-a12-pmu"
-	"arm,cortex-a9-pmu"
-	"arm,cortex-a8-pmu"
-	"arm,cortex-a7-pmu"
-	"arm,cortex-a5-pmu"
-	"arm,arm11mpcore-pmu"
-	"arm,arm1176-pmu"
-	"arm,arm1136-pmu"
-	"brcm,vulcan-pmu"
-	"cavium,thunder-pmu"
-	"qcom,scorpion-pmu"
-	"qcom,scorpion-mp-pmu"
-	"qcom,krait-pmu"
-- interrupts : 1 combined interrupt or 1 per core. If the interrupt is a per-cpu
-               interrupt (PPI) then 1 interrupt should be specified.
-
-Optional properties:
-
-- interrupt-affinity : When using SPIs, specifies a list of phandles to CPU
-                       nodes corresponding directly to the affinity of
-		       the SPIs listed in the interrupts property.
-
-                       When using a PPI, specifies a list of phandles to CPU
-		       nodes corresponding to the set of CPUs which have
-		       a PMU of this type signalling the PPI listed in the
-		       interrupts property, unless this is already specified
-		       by the PPI interrupt specifier itself (in which case
-		       the interrupt-affinity property shouldn't be present).
-
-                       This property should be present when there is more than
-		       a single SPI.
-
-
-- qcom,no-pc-write : Indicates that this PMU doesn't support the 0xc and 0xd
-                     events.
-
-- secure-reg-access : Indicates that the ARMv7 Secure Debug Enable Register
-		      (SDER) is accessible. This will cause the driver to do
-		      any setup required that is only possible in ARMv7 secure
-		      state. If not present the ARMv7 SDER will not be touched,
-		      which means the PMU may fail to operate unless external
-		      code (bootloader or security monitor) has performed the
-		      appropriate initialisation. Note that this property is
-		      not valid for non-ARMv7 CPUs or ARMv7 CPUs booting Linux
-		      in Non-secure state.
-
-Example:
-
-pmu {
-        compatible = "arm,cortex-a9-pmu";
-        interrupts = <100 101>;
-};

91 lines not on this page · raw message

deleted file mode 100644
index 0df6acacfaea..000000000000
@@ -1,46 +0,0 @@
-* ARM Primecell Peripherals
-
-ARM, Ltd. Primecell peripherals have a standard id register that can be used to
-identify the peripheral type, vendor, and revision. This value can be used for
-driver matching.
-
-Required properties:
-
-- compatible : should be a specific name for the peripheral and
-               "arm,primecell".  The specific name will match the ARM
-               engineering name for the logic block in the form: "arm,pl???"
-
-Optional properties:
-
-- arm,primecell-periphid : Value to override the h/w value with
-- clocks : From common clock binding. First clock is phandle to clock for apb
-	pclk. Additional clocks are optional and specific to those peripherals.
-- clock-names : From common clock binding. Shall be "apb_pclk" for first clock.
-- dmas : From common DMA binding. If present, refers to one or more dma channels.
-- dma-names : From common DMA binding, needs to match the 'dmas' property.
-              Devices with exactly one receive and transmit channel shall name
-              these "rx" and "tx", respectively.
-- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
-- pinctrl-names : Names corresponding to the numbered pinctrl states
-- interrupts : one or more interrupt specifiers
-- interrupt-names : names corresponding to the interrupts properties
-
-Example:
-
-serial@fff36000 {
-	compatible = "arm,pl011", "arm,primecell";
-	arm,primecell-periphid = <0x00341011>;
-
-	clocks = <&pclk>;
-	clock-names = "apb_pclk";
-
-	dmas = <&dma-controller 4>, <&dma-controller 5>;
-	dma-names = "rx", "tx";	
-
-	pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
-	pinctrl-1 = <&uart0_sleep_mode>;
-	pinctrl-names = "default","sleep";
-
-	interrupts = <0 11 0x4>;
-};
-

new file mode 100644
index 000000000000..5aae37f1c563
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/primecell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Primecell Peripherals
+
+maintainers:
+  - Rob Herring <[email protected]>
+
+description: |+
+  ARM, Ltd. Primecell peripherals have a standard id register that can be used to
+  identify the peripheral type, vendor, and revision. This value can be used for
+  driver matching.
+
+properties:
+  compatible:
+    contains:
+      const: arm,primecell
+    description:
+      Should be a specific name for the peripheral followed by "arm,primecell".
+      The specific name will match the ARM engineering name for the logic block
+      in the form "arm,pl???"
+
+  arm,primecell-periphid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Value to override the h/w ID value
+  clocks:
+    minItems: 1
+    maxItems: 32
+  clock-names:
+    contains:
+      const: apb_pclk
+    additionalItems: true
+...

deleted file mode 100644
index d54f33c4e0da..000000000000
@@ -1,56 +0,0 @@
-Actions Semi platforms device tree bindings
--------------------------------------------
-
-
-S500 SoC
-========
-
-Required root node properties:
-
- - compatible :  must contain "actions,s500"
-
-
-Modules:
-
-Root node property compatible must contain, depending on module:
-
- - LeMaker Guitar: "lemaker,guitar"
-
-
-Boards:
-
-Root node property compatible must contain, depending on board:
-
- - Allo.com Sparky: "allo,sparky"
- - Cubietech CubieBoard6: "cubietech,cubieboard6"
- - LeMaker Guitar Base Board rev. B: "lemaker,guitar-bb-rev-b", "lemaker,guitar"
-
-
-S700 SoC
-========
-
-Required root node properties:
-
-- compatible :  must contain "actions,s700"
-
-
-Boards:
-
-Root node property compatible must contain, depending on board:
-
- - Cubietech CubieBoard7: "cubietech,cubieboard7"
-
-
-S900 SoC
-========
-
-Required root node properties:
-
-- compatible :  must contain "actions,s900"
-
-
-Boards:
-
-Root node property compatible must contain, depending on board:
-
- - uCRobotics Bubblegum-96: "ucrobotics,bubblegum-96"

new file mode 100644
index 000000000000..60abd371e474
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/actions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi platforms device tree bindings
+
+maintainers:
+  - Andreas Färber <[email protected]>
+  - Manivannan Sadhasivam <[email protected]>
+
+properties:
+  compatible:
+    oneOf:
+      # The Actions Semi S500 is a quad-core ARM Cortex-A9 SoC.
+      - items:
+          - enum:
+              - allo,sparky # Allo.com Sparky
+              - cubietech,cubieboard6 # Cubietech CubieBoard6
+          - const: actions,s500
+      - items:
+          - enum:
+              - lemaker,guitar-bb-rev-b # LeMaker Guitar Base Board rev. B
+          - const: lemaker,guitar
+          - const: actions,s500
+
+      # The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC.
+      - items:
+          - enum:
+              - cubietech,cubieboard7 # Cubietech CubieBoard7
+          - const: actions,s700
+
+      # The Actions Semi S900 is a quad-core ARM Cortex-A53 SoC.
+      - items:
+          - enum:
+              - ucrobotics,bubblegum-96 # uCRobotics Bubblegum-96
+          - const: actions,s900

deleted file mode 100644
index d00debe2e86f..000000000000
@@ -1,16 +0,0 @@
-Annapurna Labs Alpine Platform Device Tree Bindings
----------------------------------------------------------------
-
-Boards in the Alpine family shall have the following properties:
-
-* Required root node properties:
-compatible: must contain "al,alpine"
-
-* Example:
-
-/ {
-	model = "Annapurna Labs Alpine Dev Board";
-	compatible = "al,alpine";
-
-	...
-}

new file mode 100644
index 000000000000..82e2fafdfece
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/al,alpine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Annapurna Labs Alpine Platform Device Tree Bindings
+
+maintainers:
+  - Tsahee Zidenberg <[email protected]>
+description: test
+
+properties:
+  compatible:
+    items:
+      - const: al,alpine
+  model:
+    items:
+      - const: "Annapurna Labs Alpine Dev Board"
+
+...

deleted file mode 100644
index 558735aacca8..000000000000
@@ -1,14 +0,0 @@
-Altera's SoCFPGA platform device tree bindings
----------------------------------------------
-
-Boards with Cyclone 5 SoC:
-Required root node properties:
-compatible = "altr,socfpga-cyclone5", "altr,socfpga";
-
-Boards with Arria 5 SoC:
-Required root node properties:
-compatible = "altr,socfpga-arria5", "altr,socfpga";
-
-Boards with Arria 10 SoC:
-Required root node properties:
-compatible = "altr,socfpga-arria10", "altr,socfpga";

new file mode 100644
index 000000000000..49e0362ddc11
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/altera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera's SoCFPGA platform device tree bindings
+
+maintainers:
+  - Dinh Nguyen <[email protected]>
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - altr,socfpga-cyclone5
+        - altr,socfpga-arria5
+        - altr,socfpga-arria10
+      - const: altr,socfpga
+...

index 4498292b833d..f5c8d50a3506 100644
@@ -107,32 +107,3 @@ Board compatible values (alphabetically, grouped by SoC):
   - "amlogic,s400" (Meson axg a113d)
 
   - "amlogic,u200" (Meson g12a s905d2)
-
-Amlogic Meson Firmware registers Interface
-------------------------------------------
-
-The Meson SoCs have a register bank with status and data shared with the
-secure firmware.
-
-Required properties:
- - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
-
-Properties should indentify components of this register interface :
-
-Meson GX SoC Information
-------------------------
-A firmware register encodes the SoC type, package and revision information on
-the Meson GX SoCs.
-If present, the following property should be added :
-
-Optional properties:
-  - amlogic,has-chip-id: If present, the interface gives the current SoC version.
-
-Example
--------
-
-ao-secure@140 {
-	compatible = "amlogic,meson-gx-ao-secure", "syscon";
-	reg = <0x0 0x140 0x0 0x140>;
-	amlogic,has-chip-id;
-};

new file mode 100644
index 000000000000..c67d9f48fb91
@@ -0,0 +1,28 @@
+Amlogic Meson Firmware registers Interface
+------------------------------------------
+
+The Meson SoCs have a register bank with status and data shared with the
+secure firmware.
+
+Required properties:
+ - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
+
+Properties should indentify components of this register interface :
+
+Meson GX SoC Information
+------------------------
+A firmware register encodes the SoC type, package and revision information on
+the Meson GX SoCs.
+If present, the following property should be added :
+
+Optional properties:
+  - amlogic,has-chip-id: If present, the interface gives the current SoC version.
+
+Example
+-------
+
+ao-secure@140 {
+	compatible = "amlogic,meson-gx-ao-secure", "syscon";
+	reg = <0x0 0x140 0x0 0x140>;
+	amlogic,has-chip-id;
+};

deleted file mode 100644
index f5c8d50a3506..000000000000
@@ -1,109 +0,0 @@
-Amlogic MesonX device tree bindings
--------------------------------------------
-
-Work in progress statement:
-
-Device tree files and bindings applying to Amlogic SoCs and boards are
-considered "unstable". Any Amlogic device tree binding may change at
-any time. Be sure to use a device tree binary and a kernel image
-generated from the same source tree.
-
-Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
-stable binding/ABI.
-
----------------------------------------------------------------
-
-Boards with the Amlogic Meson6 SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,meson6"
-
-Boards with the Amlogic Meson8 SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,meson8";
-
-Boards with the Amlogic Meson8b SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,meson8b";
-
-Boards with the Amlogic Meson8m2 SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,meson8m2";
-
-Boards with the Amlogic Meson GXBaby SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,meson-gxbb";
-
-Boards with the Amlogic Meson GXL S905X SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,s905x", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXL S905D SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,s905d", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXL S805X SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,s805x", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXL S905W SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,s905w", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,s912", "amlogic,meson-gxm";
-
-Boards with the Amlogic Meson AXG A113D SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,a113d", "amlogic,meson-axg";
-
-Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties:
-  Required root node property:
-    compatible: "amlogic,g12a";
-
-Board compatible values (alphabetically, grouped by SoC):
-
-  - "geniatech,atv1200" (Meson6)
-
-  - "minix,neo-x8" (Meson8)
-
-  - "endless,ec100" (Meson8b)
-  - "hardkernel,odroid-c1" (Meson8b)
-  - "tronfy,mxq" (Meson8b)
-
-  - "tronsmart,mxiii-plus" (Meson8m2)
-
-  - "amlogic,p200" (Meson gxbb)
-  - "amlogic,p201" (Meson gxbb)
-  - "friendlyarm,nanopi-k2" (Meson gxbb)
-  - "hardkernel,odroid-c2" (Meson gxbb)
-  - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
-  - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
-  - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
-  - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
-  - "wetek,hub" (Meson gxbb)
-  - "wetek,play2" (Meson gxbb)
-
-  - "amlogic,p212" (Meson gxl s905x)
-  - "hwacom,amazetv" (Meson gxl s905x)
-  - "khadas,vim" (Meson gxl s905x)
-  - "libretech,cc" (Meson gxl s905x)
-
-  - "amlogic,p230" (Meson gxl s905d)
-  - "amlogic,p231" (Meson gxl s905d)
-
-  - "amlogic,p241" (Meson gxl s805x)
-
-  - "amlogic,p281" (Meson gxl s905w)
-  - "oranth,tx3-mini" (Meson gxl s905w)
-
-  - "amlogic,q200" (Meson gxm s912)
-  - "amlogic,q201" (Meson gxm s912)
-  - "khadas,vim2" (Meson gxm s912)
-  - "kingnovel,r-box-pro" (Meson gxm S912)
-  - "nexbox,a1" (Meson gxm s912)
-  - "tronsmart,vega-s96" (Meson gxm s912)
-
-  - "amlogic,s400" (Meson axg a113d)
-
-  - "amlogic,u200" (Meson g12a s905d2)

109 lines not on this page · raw message

deleted file mode 100644
index 4bf1b4da7659..000000000000
@@ -1,72 +0,0 @@
-Atmel AT91 device tree bindings.
-================================
-
-Boards with a SoC of the Atmel AT91 or SMART family shall have the following
-properties:
-
-Required root node properties:
-compatible: must be one of:
- * "atmel,at91rm9200"
-
- * "atmel,at91sam9" for SoCs using an ARM926EJ-S core, shall be extended with
-   the specific SoC family or compatible:
-    o "atmel,at91sam9260"
-    o "atmel,at91sam9261"
-    o "atmel,at91sam9263"
-    o "atmel,at91sam9x5" for the 5 series, shall be extended with the specific
-      SoC compatible:
-       - "atmel,at91sam9g15"
-       - "atmel,at91sam9g25"
-       - "atmel,at91sam9g35"
-       - "atmel,at91sam9x25"
-       - "atmel,at91sam9x35"
-    o "atmel,at91sam9g20"
-    o "atmel,at91sam9g45"
-    o "atmel,at91sam9n12"
-    o "atmel,at91sam9rl"
-    o "atmel,at91sam9xe"
- * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
-   SoC family:
-    o "atmel,sama5d2" shall be extended with the specific SoC compatible:
-       - "atmel,sama5d27"
-    o "atmel,sama5d3" shall be extended with the specific SoC compatible:
-       - "atmel,sama5d31"
-       - "atmel,sama5d33"
-       - "atmel,sama5d34"
-       - "atmel,sama5d35"
-       - "atmel,sama5d36"
-    o "atmel,sama5d4" shall be extended with the specific SoC compatible:
-       - "atmel,sama5d41"
-       - "atmel,sama5d42"
-       - "atmel,sama5d43"
-       - "atmel,sama5d44"
-
- * "atmel,samv7" for MCUs using a Cortex-M7, shall be extended with the specific
-   SoC family:
-    o "atmel,sams70" shall be extended with the specific MCU compatible:
-       - "atmel,sams70j19"
-       - "atmel,sams70j20"
-       - "atmel,sams70j21"
-       - "atmel,sams70n19"
-       - "atmel,sams70n20"
-       - "atmel,sams70n21"
-       - "atmel,sams70q19"
-       - "atmel,sams70q20"
-       - "atmel,sams70q21"
-    o "atmel,samv70" shall be extended with the specific MCU compatible:
-       - "atmel,samv70j19"
-       - "atmel,samv70j20"
-       - "atmel,samv70n19"
-       - "atmel,samv70n20"
-       - "atmel,samv70q19"
-       - "atmel,samv70q20"
-    o "atmel,samv71" shall be extended with the specific MCU compatible:
-       - "atmel,samv71j19"
-       - "atmel,samv71j20"
-       - "atmel,samv71j21"
-       - "atmel,samv71n19"
-       - "atmel,samv71n20"
-       - "atmel,samv71n21"
-       - "atmel,samv71q19"
-       - "atmel,samv71q20"
-       - "atmel,samv71q21"

133 lines not on this page · raw message

deleted file mode 100644
index 25fcf96795ca..000000000000
@@ -1,15 +0,0 @@
-Calxeda Platforms Device Tree Bindings
------------------------------------------------
-
-Boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC shall have the
-following properties.
-
-Required root node properties:
-    - compatible = "calxeda,highbank";
-
-
-Boards with Calxeda Cortex-A15 based ECX-2000 SOC shall have the following
-properties.
-
-Required root node properties:
-    - compatible = "calxeda,ecx-2000";

new file mode 100644
index 000000000000..aa5571d23c39
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/calxeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Platforms Device Tree Bindings
+
+maintainers:
+  - Rob Herring <[email protected]>
+description: |+
+  Bindings for boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC
+  or Cortex-A15 based ECX-2000 SOCs
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - calxeda,highbank
+          - calxeda,ecx-2000

deleted file mode 100644
index 715622c36260..000000000000
@@ -1,25 +0,0 @@
-Texas Instruments DaVinci Platforms Device Tree Bindings
---------------------------------------------------------
-
-DA850/OMAP-L138/AM18x Evaluation Module (EVM) board
-Required root node properties:
-    - compatible = "ti,da850-evm", "ti,da850";
-
-DA850/OMAP-L138/AM18x L138/C6748 Development Kit (LCDK) board
-Required root node properties:
-    - compatible = "ti,da850-lcdk", "ti,da850";
-
-EnBW AM1808 based CMC board
-Required root node properties:
-    - compatible = "enbw,cmc", "ti,da850;
-
-LEGO MINDSTORMS EV3 (AM1808 based)
-Required root node properties:
-    - compatible = "lego,ev3", "ti,da850";
-
-Generic DaVinci Boards
-----------------------
-
-DA850/OMAP-L138/AM18x generic board
-Required root node properties:
-    - compatible = "ti,da850";

new file mode 100644
index 000000000000..4326d2cfa15d
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ti/davinci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DaVinci Platforms Device Tree Bindings
+
+maintainers:
+  - Sekhar Nori <[email protected]>
+
+description:
+  DA850/OMAP-L138/AM18x based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - ti,da850-evm    # DA850/OMAP-L138/AM18x Evaluation Module (EVM) board
+          - ti,da850-lcdk   # DA850/OMAP-L138/AM18x L138/C6748 Development Kit (LCDK) board
+          - enbw,cmc        # EnBW AM1808 based CMC board
+          - lego,ev3        # LEGO MINDSTORMS EV3 (AM1808 based)
+      - const: ti,da850
+...

deleted file mode 100644
index 9821283ff516..000000000000
@@ -1,6 +0,0 @@
-Armadeus i.MX Platforms Device Tree Bindings
------------------------------------------------
-
-APF51: i.MX51 based module.
-Required root node properties:
-    - compatible = "armadeus,imx51-apf51", "fsl,imx51";

deleted file mode 100644
index 886b503caf9c..000000000000
@@ -1,6 +0,0 @@
-Beckhoff Automation Platforms Device Tree Bindings
---------------------------------------------------
-
-CX9020 Embedded PC
-Required root node properties:
-    - compatible = "bhf,cx9020", "fsl,imx53";

deleted file mode 100644
index 42a10285af9c..000000000000
@@ -1,25 +0,0 @@
-CompuLab SB-SOM is a multi-module baseboard capable of carrying:
- - CM-T43
- - CM-T54
- - CM-QS600
- - CL-SOM-AM57x
- - CL-SOM-iMX7
-modules with minor modifications to the SB-SOM assembly.
-
-Required root node properties:
-    - compatible = should be "compulab,sb-som"
-
-Compulab CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on
-Freescale i.MX7 ARM Cortex-A7 System-on-Chip.
-
-Required root node properties:
-    - compatible = "compulab,cl-som-imx7", "fsl,imx7d";
-
-Compulab SBC-iMX7 is a single board computer based on the
-Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with
-the CL-SOM-iMX7 System-on-Module providing most of the functions,
-and SB-SOM-iMX7 carrier board providing additional peripheral
-functions and connectors.
-
-Required root node properties:
-    - compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";

229 lines not on this page · raw message

214 lines not on this page · raw message

deleted file mode 100644
index dbd54a3aa07d..000000000000
@@ -1,22 +0,0 @@
-I2SE Device Tree Bindings
--------------------------
-
-Duckbill Board
-Required root node properties:
-    - compatible = "i2se,duckbill", "fsl,imx28";
-
-Duckbill 2 Board
-Required root node properties:
-    - compatible = "i2se,duckbill-2", "fsl,imx28";
-
-Duckbill 2 485 Board
-Required root node properties:
-    - compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
-
-Duckbill 2 EnOcean Board
-Required root node properties:
-    - compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
-
-Duckbill 2 SPI Board
-Required root node properties:
-    - compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";

deleted file mode 100644
index d726aeca56be..000000000000
@@ -1,10 +0,0 @@
-Olimex Device Tree Bindings
----------------------------
-
-SAM9-L9260 Board
-Required root node properties:
-    - compatible = "olimex,sam9-l9260", "atmel,at91sam9260";
-
-i.MX23 Olinuxino Low Cost Board
-Required root node properties:
-    - compatible = "olimex,imx23-olinuxino", "fsl,imx23";

deleted file mode 100644
index f1cedc00dcab..000000000000
@@ -1,23 +0,0 @@
-Technologic Systems Platforms Device Tree Bindings
---------------------------------------------------
-
-TS-4600 is a System-on-Module based on the Freescale i.MX28 System-on-Chip.
-It can be mounted on a carrier board providing additional peripheral connectors.
-Required root node properties:
-	- compatible = "technologic,imx28-ts4600", "fsl,imx28"
-
-TS-4800 board
-Required root node properties:
-	- compatible = "technologic,imx51-ts4800", "fsl,imx51";
-
-TS-4900 is a System-on-Module based on the Freescale i.MX6 System-on-Chip.
-It can be mounted on a carrier board providing additional peripheral connectors.
-Required root node properties:
-	- compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl"
-	- compatible = "technologic,imx6q-ts4900", "fsl,imx6q"
-
-TS-7970 is a System-on-Module based on the Freescale i.MX6 System-on-Chip.
-It can be mounted on a carrier board providing additional peripheral connectors.
-Required root node properties:
-	- compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl"
-	- compatible = "technologic,imx6q-ts7970", "fsl,imx6q"

deleted file mode 100644
index 8f260e5cfd16..000000000000
@@ -1,79 +0,0 @@
-MediaTek SoC based Platforms Device Tree Bindings
-
-Boards with a MediaTek SoC shall have the following property:
-
-Required root node property:
-
-compatible: Must contain one of
-   "mediatek,mt2701"
-   "mediatek,mt2712"
-   "mediatek,mt6580"
-   "mediatek,mt6589"
-   "mediatek,mt6592"
-   "mediatek,mt6755"
-   "mediatek,mt6765"
-   "mediatek,mt6795"
-   "mediatek,mt6797"
-   "mediatek,mt7622"
-   "mediatek,mt7623" which is referred to MT7623N SoC
-   "mediatek,mt7623a"
-   "mediatek,mt8127"
-   "mediatek,mt8135"
-   "mediatek,mt8173"
-
-
-Supported boards:
-
-- Evaluation board for MT2701:
-    Required root node properties:
-      - compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
-- Evaluation board for MT2712:
-    Required root node properties:
-      - compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
-- Evaluation board for MT6580:
-    Required root node properties:
-      - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
-- bq Aquaris5 smart phone:
-    Required root node properties:
-      - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
-- Evaluation board for MT6592:
-    Required root node properties:
-      - compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
-- Evaluation phone for MT6755(Helio P10):
-    Required root node properties:
-      - compatible = "mediatek,mt6755-evb", "mediatek,mt6755";
-- Evaluation board for MT6765(Helio P22):
-    Required root node properties:
-      - compatible = "mediatek,mt6765-evb", "mediatek,mt6765";
-- Evaluation board for MT6795(Helio X10):
-    Required root node properties:
-      - compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
-- Evaluation board for MT6797(Helio X20):
-    Required root node properties:
-      - compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
-- Mediatek X20 Development Board:
-    Required root node properties:
-      - compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797";
-- Reference board variant 1 for MT7622:
-    Required root node properties:
-      - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
-- Reference board for MT7623a with eMMC:
-    Required root node properties:
-      - compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623";
-- Reference board for MT7623a with NAND:
-    Required root node properties:
-      - compatible = "mediatek,mt7623a-rfb-nand", "mediatek,mt7623";
-- Reference board for MT7623n with eMMC:
-    Required root node properties:
-      - compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
-- Bananapi BPI-R2 board:
-      - compatible = "bananapi,bpi-r2", "mediatek,mt7623";
-- MTK mt8127 tablet moose EVB:
-    Required root node properties:
-      - compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
-- MTK mt8135 tablet EVB:
-    Required root node properties:
-      - compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135";
-- MTK mt8173 tablet EVB:
-    Required root node properties:
-      - compatible = "mediatek,mt8173-evb", "mediatek,mt8173";

85 lines not on this page · raw message

deleted file mode 100644
index 4d08518bd176..000000000000
@@ -1,14 +0,0 @@
-TI-NSPIRE calculators
-
-Required properties:
-- compatible: Compatible property value should contain "ti,nspire".
-	CX models should have "ti,nspire-cx"
-	Touchpad models should have "ti,nspire-tp"
-	Clickpad models should have "ti,nspire-clp"
-
-Example:
-
-/ {
-	model = "TI-NSPIRE CX";
-	compatible = "ti,nspire-cx";
-	...

new file mode 100644
index 000000000000..e372b43da62f
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ti/nspire.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-NSPIRE calculators
+
+maintainers:
+  - Daniel Tang <[email protected]>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          # CX models
+          - ti,nspire-cx
+          # Touchpad models
+          - ti,nspire-tp
+          # Clickpad models
+          - ti,nspire-clp
+...

deleted file mode 100644
index ac64e60f99f1..000000000000
@@ -1,14 +0,0 @@
-Oxford Semiconductor OXNAS SoCs Family device tree bindings
--------------------------------------------
-
-Boards with the OX810SE SoC shall have the following properties:
-  Required root node property:
-    compatible: "oxsemi,ox810se"
-
-Boards with the OX820 SoC shall have the following properties:
-  Required root node property:
-    compatible: "oxsemi,ox820"
-
-Board compatible values:
-  - "wd,mbwe" (OX810SE)
-  - "cloudengines,pogoplugv3" (OX820)

new file mode 100644
index 000000000000..6ae51ef513be
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/oxnas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Oxford Semiconductor OXNAS SoCs Family device tree bindings
+
+maintainers:
+  - Neil Armstrong <[email protected]>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+            - wd,mbwe
+        - const: oxsemi,ox810se
+
+      - items:
+        - enum:
+            - cloudengines,pogoplugv3
+        - const: oxsemi,ox820

deleted file mode 100644
index ee532e705d6c..000000000000
@@ -1,57 +0,0 @@
-QCOM device tree bindings
--------------------------
-
-Some qcom based bootloaders identify the dtb blob based on a set of
-device properties like SoC and platform and revisions of those components.
-To support this scheme, we encode this information into the board compatible
-string.
-
-Each board must specify a top-level board compatible string with the following
-format:
-
-	compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]"
-
-The 'SoC' and 'board' elements are required. All other elements are optional.
-
-The 'SoC' element must be one of the following strings:
-
-	apq8016
-	apq8074
-	apq8084
-	apq8096
-	msm8916
-	msm8974
-	msm8992
-	msm8994
-	msm8996
-	mdm9615
-	ipq8074
-	sdm845
-
-The 'board' element must be one of the following strings:
-
-	cdp
-	liquid
-	dragonboard
-	mtp
-	sbc
-	hk01
-
-The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
-where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
-as v1. If all versions of the 'board_version' elements match, then a
-wildcard '*' should be used, e.g. 'v*'.
-
-The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9.
-
-Examples:
-
-	"qcom,msm8916-v1-cdp-pm8916-v2.1"
-
-A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version
-2.1.
-
-	"qcom,apq8074-v2.0-2-dragonboard/1-v0.1"
-
-A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in
-foundry 2.

125 lines not on this page · raw message

deleted file mode 100644
index 95839e19ae92..000000000000
@@ -1,22 +0,0 @@
-Realtek platforms device tree bindings
---------------------------------------
-
-
-RTD1295 SoC
-===========
-
-Required root node properties:
-
- - compatible :  must contain "realtek,rtd1295"
-
-
-Root node property compatible must contain, depending on board:
-
- - MeLE V9: "mele,v9"
- - ProBox2 AVA: "probox2,ava"
- - Zidoo X9S: "zidoo,x9s"
-
-
-Example:
-
-    compatible = "zidoo,x9s", "realtek,rtd1295";

new file mode 100644
index 000000000000..84ee9b22ef7a
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/realtek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek platforms device tree bindings
+
+maintainers:
+  - Andreas Färber <[email protected]>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    # RTD1295 SoC based boards
+    items:
+      - enum:
+          - mele,v9
+          - probox2,ava
+          - zidoo,x9s
+      - const: realtek,rtd1295
+...

deleted file mode 100644
index 0cc71236d639..000000000000
@@ -1,240 +0,0 @@
-Rockchip platforms device tree bindings
----------------------------------------
-
-- 96boards RK3399 Ficus (ROCK960 Enterprise Edition)
-    Required root node properties:
-      - compatible = "vamrs,ficus", "rockchip,rk3399";
-
-- 96boards RK3399 Rock960 (ROCK960 Consumer Edition)
-    Required root node properties:
-      - compatible = "vamrs,rock960", "rockchip,rk3399";
-
-- Amarula Vyasa RK3288 board
-    Required root node properties:
-      - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288";
-
-- Asus Tinker board
-    Required root node properties:
-      - compatible = "asus,rk3288-tinker", "rockchip,rk3288";
-
-- Asus Tinker board S
-    Required root node properties:
-      - compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
-
-- Kylin RK3036 board:
-    Required root node properties:
-      - compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
-
-- MarsBoard RK3066 board:
-    Required root node properties:
-      - compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
-
-- bq Curie 2 tablet:
-    Required root node properties:
-      - compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
-
-- ChipSPARK Rayeager PX2 board:
-    Required root node properties:
-      - compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
-
-- Radxa Rock board:
-    Required root node properties:
-      - compatible = "radxa,rock", "rockchip,rk3188";
-
-- Radxa Rock2 Square board:
-    Required root node properties:
-      - compatible = "radxa,rock2-square", "rockchip,rk3288";
-
-- Rikomagic MK808 v1 board:
-    Required root node properties:
-      - compatible = "rikomagic,mk808", "rockchip,rk3066a";
-
-- Firefly Firefly-RK3288 board:
-    Required root node properties:
-      - compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
-    or
-      - compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288";
-
-- Firefly Firefly-RK3288 Reload board:
-    Required root node properties:
-      - compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288";
-
-- Firefly Firefly-RK3399 board:
-    Required root node properties:
-      - compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
-
-- Firefly roc-rk3328-cc board:
-    Required root node properties:
-      - compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
-
-- Firefly ROC-RK3399-PC board:
-    Required root node properties:
-      - compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
-
-- ChipSPARK PopMetal-RK3288 board:
-    Required root node properties:
-      - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
-
-- Netxeon R89 board:
-    Required root node properties:
-      - compatible = "netxeon,r89", "rockchip,rk3288";
-
-- GeekBuying GeekBox:
-    Required root node properties:
-      - compatible = "geekbuying,geekbox", "rockchip,rk3368";
-
-- Google Bob (Asus Chromebook Flip C101PA):
-    Required root node properties:
-	compatible = "google,bob-rev13", "google,bob-rev12",
-		     "google,bob-rev11", "google,bob-rev10",
-		     "google,bob-rev9", "google,bob-rev8",
-		     "google,bob-rev7", "google,bob-rev6",
-		     "google,bob-rev5", "google,bob-rev4",
-		     "google,bob", "google,gru", "rockchip,rk3399";
-
-- Google Brain (dev-board):
-    Required root node properties:
-      - compatible = "google,veyron-brain-rev0", "google,veyron-brain",
-		     "google,veyron", "rockchip,rk3288";
-
-- Google Gru (dev-board):
-    Required root node properties:
-      - compatible = "google,gru-rev15", "google,gru-rev14",
-		     "google,gru-rev13", "google,gru-rev12",
-		     "google,gru-rev11", "google,gru-rev10",
-		     "google,gru-rev9", "google,gru-rev8",
-		     "google,gru-rev7", "google,gru-rev6",
-		     "google,gru-rev5", "google,gru-rev4",
-		     "google,gru-rev3", "google,gru-rev2",
-		     "google,gru", "rockchip,rk3399";
-
-- Google Jaq (Haier Chromebook 11 and more):
-    Required root node properties:
-      - compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
-		     "google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
-		     "google,veyron-jaq-rev1", "google,veyron-jaq",
-		     "google,veyron", "rockchip,rk3288";
-
-- Google Jerry (Hisense Chromebook C11 and more):
-    Required root node properties:
-      - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
-		     "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
-		     "google,veyron-jerry-rev3", "google,veyron-jerry",
-		     "google,veyron", "rockchip,rk3288";
-
-- Google Kevin (Samsung Chromebook Plus):
-    Required root node properties:
-      - compatible = "google,kevin-rev15", "google,kevin-rev14",
-		     "google,kevin-rev13", "google,kevin-rev12",
-		     "google,kevin-rev11", "google,kevin-rev10",
-		     "google,kevin-rev9", "google,kevin-rev8",
-		     "google,kevin-rev7", "google,kevin-rev6",
-		     "google,kevin", "google,gru", "rockchip,rk3399";
-
-- Google Mickey (Asus Chromebit CS10):
-    Required root node properties:
-      - compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
-		     "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
-		     "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
-		     "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
-		     "google,veyron-mickey-rev0", "google,veyron-mickey",
-		     "google,veyron", "rockchip,rk3288";
-
-- Google Minnie (Asus Chromebook Flip C100P):
-    Required root node properties:
-      - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
-		     "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
-		     "google,veyron-minnie-rev0", "google,veyron-minnie",
-		     "google,veyron", "rockchip,rk3288";
-
-- Google Pinky (dev-board):
-    Required root node properties:
-      - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
-		     "google,veyron", "rockchip,rk3288";
-
-- Google Speedy (Asus C201 Chromebook):
-    Required root node properties:
-      - compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
-		     "google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
-		     "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
-		     "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
-		     "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
-
-- mqmaker MiQi:
-    Required root node properties:
-      - compatible = "mqmaker,miqi", "rockchip,rk3288";
-
-- Phytec phyCORE-RK3288: Rapid Development Kit
-    Required root node properties:
-     - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288";
-
-- Pine64 Rock64 board:
-    Required root node properties:
-    - compatible = "pine64,rock64", "rockchip,rk3328";
-
-- Pine64 RockPro64 board:
-    Required root node properties:
-    - compatible = "pine64,rockpro64", "rockchip,rk3399";
-
-- Rockchip PX3 Evaluation board:
-    Required root node properties:
-      - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
-
-- Rockchip PX5 Evaluation board:
-    Required root node properties:
-      - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
-
-- Rockchip PX30 Evaluation board:
-    Required root node properties:
-      - compatible = "rockchip,px30-evb", "rockchip,px30";
-
-- Rockchip RV1108 Evaluation board
-    Required root node properties:
-      - compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
-
-- Rockchip RK3368 evb:
-    Required root node properties:
-      - compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";
-
-- Rockchip R88 board:
-    Required root node properties:
-      - compatible = "rockchip,r88", "rockchip,rk3368";
-
-- Rockchip RK3228 Evaluation board:
-    Required root node properties:
-     - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
-
-- Rockchip RK3229 Evaluation board:
-     - compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
-
-- Rockchip RK3288 Fennec board:
-    Required root node properties:
-     - compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
-
-- Rockchip RK3328 evb:
-    Required root node properties:
-      - compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
-
-- Rockchip RK3399 evb:
-    Required root node properties:
-      - compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
-
-- Rockchip RK3399 Sapphire board standalone:
-    Required root node properties:
-      - compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
-
-- Rockchip RK3399 Sapphire Excavator board:
-    Required root node properties:
-      - compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399";
-
-- Theobroma Systems RK3368-uQ7 Haikou Baseboard:
-    Required root node properties:
-      - compatible = "tsd,rk3368-uq7-haikou", "rockchip,rk3368";
-
-- Theobroma Systems RK3399-Q7 Haikou Baseboard:
-    Required root node properties:
-      - compatible = "tsd,rk3399-q7-haikou", "rockchip,rk3399";
-
-- Tronsmart Orion R68 Meta
-    Required root node properties:
-      - compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";

251 lines not on this page · raw message