Antwort: Re: booting with systemd fails with poky 9.0.0 & meta-ivi 4.0 & meta-intel master
Quoted 6 lines · felix
Hello,
Quoted 1 line
What branch of meta-ivi are you using?
I tried the 3.0 (and poky 1.3), 4.0 branch (and poky 1.4) and 4.0 branch (with "git checkout
e33e0a0da6fd6f59e5e8244da9f23b590cf066e1" as stated
in
Quoted 7 lines
the genivi wiki), but no success.
Quoted 3 lines
As you have successfully build and tried qemux86 machine IVI images, did you try to create a pristine (non-IVI) Poky image that uses systemd as init system already? Did that work for a crownbay machine?
I built a core-image-sato image using MACHINE ?= "crownbay" and DISTRO
?=
Quoted 2 lines
"poky-ivi-systemd", but I had no luck.
Right now I'm btrying that again with DISTRO ?="poky"
The build is done. It won't boot either. The Error Message is the same except that the init and cat lines are gone.
The last two lines I get are
systemd-udev[48]: starting version 199 Waiting for removable media...
Quoted 23 lines
Regards,
FelixWhat branch of meta-ivi are you using?
-----Original Message-----
From: Andrei Gherzan [andrei at gherzan.ro<mailto:andrei at gherzan.ro>]
Sent: Thursday, May 02, 2013 04:27 AM Pacific Standard Time
To: Felix01 Fischer
Cc: yocto at yoctoproject.org; Sarbu, Florin-Ionut (Florin); Behrens, Holger
Subject: Re: [yocto] Antwort: Re: booting with systemd fails with poky 9.0.0 & meta-ivi 4.0 & meta-intel master
Quoted 5 lines
On Thu, May 2, 2013 at 10:08 AM, Felix01 Fischer <felix01.fischer at iav.de<mailto:felix01.fischer at iav.de>> wrote:
Hello,I've attached a file with the changes I made to local.conf,
bblayers.conf
Quoted 6 lines
& some output from bitbake. I can build working images for qemux86, too
The build process itself triggers no errors.
As im building with MACHINE ??= "crownbay" I was able to locate
tmp-eglibc-eglibc/work/crownbay-oe-linux/foton-image/4.0.0-r0/rootfs/bin/mount
Quoted 13 lines
which is a symlink to
/bin/mount.util-linux. This file exists, too.This is the output when trying to boot, beginning with the /init error
"/init: line 98: mount: not found
/init: line 98: mount: not found
/init: line 98: mount: not found systemd-udev[44]: starting version 199
cat: can't open '/proc/cmdline': No such file or directory Waiting for removable media..."
Quoted 1 line
So you are using crownbay. Most probably you miss some systemd configs
in
Quoted 13 lines
kernel. That would be my guess.
Adding Florin Sarbu and Holger Behrens to CC (meta-ivi maintainer).Cheers!
--
Andrei Gherzan
m: +40.744.478.414 | f: +40.31.816.28.12_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 4 lines · Felix Fischer
The last two lines I get are
systemd-udev[48]: starting version 199
Waiting for removable media...
It's possibly waiting for the automounter to run, but it's not installed. Check that udev-extraconf is installed in your rootfs/initramfs or whatever is booting. core-image-minimal-initramfs does, but I've no idea if the IVI images pull it in explicitly as we recently removed it as a universal recommendation in systemd/udev.
Ross
Antwort: Re: Antwort: Re: booting with systemd fails with poky 9.0.0 & meta-ivi 4.0 & meta-intel master
[email protected] schrieb am 07.05.2013 20:51:52:
Quoted 21 lines
"Burton, Ross" <[email protected]>
Gesendet von: [email protected]07.05.2013 20:51
An
Felix Fischer <[email protected]>,
Kopie
Thema
Re: [yocto] Antwort: Re: booting with systemd fails with poky 9.0.0 & meta-ivi 4.0 & meta-intel master
Quoted 2 lines · Felix Fischer
The last two lines I get are
Quoted 9 lines
Quoted 2 lines
systemd-udev[48]: starting version 199
Waiting for removable media...It's possibly waiting for the automounter to run, but it's not installed. Check that udev-extraconf is installed in your rootfs/initramfs or whatever is booting. core-image-minimal-initramfs does, but I've no idea if the IVI images pull it in explicitly as we recently removed it as a universal recommendation in systemd/udev.
I built an image with udev-extraconf and the following changed:
No change with genivi and crownbay layers enabled (distro = "poky-ivi-systemd")
"/init ....." errors disappeared but the boot process still hangs while
"waiting for removable media" for a build with only crownbay layers enabled (distro = "poky", systemd set as init manager)
Viele Grüße
Felix Fischer
Studentischer Mitarbeiter (VC-D1)
Vehicle Cockpit Electronics Devices
IAV GmbH
Carnotstr. 1
10587 BERLIN
GERMANY
Phone: +49 30 39978-9540 Fax: +49 30 39978-9411 E-Mail: <mailto:[email protected]> Internet: http://www.iav.com
Sitz/Registered Office: Berlin,
Registergericht/Registration Court: Amtsgericht Charlottenburg, Registernummer/Company Registration Number: HRB 21 280, Geschäftsführer/Managing Directors: Kurt Blumenröder, Michael Schubert, Dr. Rüdiger Goyk