Skip to contentSkip to conversation

turbostat fixes for 7.0

PATCH New Len Brown 1 participant 10 messages Apr 10 Turbostat utility

lore
Share & tools
lore

Len Brown

author maintainer
#0 lore raw

cover turbostat fixes for 7.0

Please let me know if you seen any issues with these fixes.

thanks!
Len Brown, Intel Open Source Technology Center

Available here:
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux.git turbostat
----------------------------------------------------------------
Artem Bityutskiy (4):
tools/power turbostat: Consistently use print_float_value() tools/power turbostat: Fix incorrect format variable tools/power turbostat: Fix --show/--hide for individual cpuidle counters tools/power turbostat: Fix delimiter bug in print functions

David Arcari (1):
tools/power turbostat: Allow execution to continue after perf_l2_init() failure

Len Brown (1):
tools/power turbostat: Fix swidle header vs data display

Serhii Pievniev (1):
tools/power/turbostat: Fix microcode patch level output for AMD/Hygon

Zhang Rui (2):
tools/power turbostat: Fix illegal memory access when SMT is present and disabled tools/power turbostat: Eliminate unnecessary data structure allocation

 tools/power/x86/turbostat/turbostat.c | 100 ++++++++++++++++++----------------
 1 file changed, 54 insertions(+), 46 deletions(-)
author maintainer
#1 lore raw

PATCH 1/9 tools/power turbostat: Fix illegal memory access when SMT is present and disabled

From: Zhang Rui <[email protected]>

When SMT is present and disabled, turbostat may under-size the thread_data array. This can corrupt results or cause turbostat to exit with a segmentation fault.

[lenb: commit message]
Fixes a2b4d0f8bf07 ("tools/power turbostat: Favor cpu# over core#")
---
 tools/power/x86/turbostat/turbostat.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
tools/power/x86/turbostat/turbostat.c +2 -3
index 1a2671c28209..ae827485950d 100644
@@ -9702,13 +9702,12 @@ void allocate_counters(struct counters *counters)
 {
 	int i;
 	int num_cores = topo.cores_per_node * topo.nodes_per_pkg * topo.num_packages;
-	int num_threads = topo.threads_per_core * num_cores;
 
-	counters->threads = calloc(num_threads, sizeof(struct thread_data));
+	counters->threads = calloc(topo.max_cpu_num + 1, sizeof(struct thread_data));
 	if (counters->threads == NULL)
 		goto error;
 
-	for (i = 0; i < num_threads; i++)
+	for (i = 0; i < topo.max_cpu_num + 1; i++)
 		(counters->threads)[i].cpu_id = -1;
 
 	counters->cores = calloc(num_cores, sizeof(struct core_data));
Signature · 1 line
2.45.2
author maintainer
#2 lore raw

PATCH 2/9 tools/power turbostat: Fix swidle header vs data display

From: Len Brown <[email protected]>

I changed my mind about displaying swidle statistics, which are "added counters". Recently I reverted the column headers to 8-columns, but kept print_decimal_value() padding out to 16-columns for all 64-bit counters.

Simplify by keeping print_decimial_value() at %lld -- which will often fit into 8-columns, and live with the fact that it can overflow and shift the other columns, which continue to tab-delimited.

This is a better compromise than inserting a bunch of space characters that most users don't like.

Fixes 1a23ba6a1ba2 ("tools/power turbostat: Print wide names only for RAW 64-bit columns")
---
 tools/power/x86/turbostat/turbostat.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
tools/power/x86/turbostat/turbostat.c +3 -4
index ae827485950d..791b9154f662 100644
@@ -2852,10 +2852,9 @@ static inline int print_hex_value(int width, int *printed, char *delim, unsigned
 
 static inline int print_decimal_value(int width, int *printed, char *delim, unsigned long long value)
 {
-	if (width <= 32)
-		return (sprintf(outp, "%s%d", (*printed++ ? delim : ""), (unsigned int)value));
-	else
-		return (sprintf(outp, "%s%-8lld", (*printed++ ? delim : ""), value));
+	UNUSED(width);
+
+	return (sprintf(outp, "%s%lld", (*printed++ ? delim : ""), value));
 }
 
 static inline int print_float_value(int *printed, char *delim, double value)
Signature · 1 line
2.45.2
author maintainer
#3 lore raw

PATCH 3/9 tools/power turbostat: Eliminate unnecessary data structure allocation

In reply to Len Brown

From: Zhang Rui <[email protected]>

Linux core_id's are a per-package namespace, not a per-node namespace.

Rename topo.cores_per_node to topo.cores_per_pkg to reflect this.

Eliminate topo.nodes_per_pkg from the sizing for core data structures, since it has no role except to unnecessarily bloat the allocation.

Validated on multiple Intel platforms (ICX/SPR/SRF/EMR/GNR/CWF) with various CPU online/offline configurations and SMT enabled/disabled scenarios.

No functional changes.

[lenb: commit message]
---
 tools/power/x86/turbostat/turbostat.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
tools/power/x86/turbostat/turbostat.c +4 -4
index 791b9154f662..14021a6ed717 100644
@@ -2409,7 +2409,7 @@ struct topo_params {
 	int max_l3_id;
 	int max_node_num;
 	int nodes_per_pkg;
-	int cores_per_node;
+	int cores_per_pkg;
 	int threads_per_core;
 } topo;
 
@@ -9633,9 +9633,9 @@ void topology_probe(bool startup)
 	topo.max_core_id = max_core_id;	/* within a package */
 	topo.max_package_id = max_package_id;
 
-	topo.cores_per_node = max_core_id + 1;
+	topo.cores_per_pkg = max_core_id + 1;
 	if (debug > 1)
-		fprintf(outf, "max_core_id %d, sizing for %d cores per package\n", max_core_id, topo.cores_per_node);
+		fprintf(outf, "max_core_id %d, sizing for %d cores per package\n", max_core_id, topo.cores_per_pkg);
 	if (!summary_only)
 		BIC_PRESENT(BIC_Core);
 
@@ -9700,7 +9700,7 @@ void allocate_counters_1(struct counters *counters)
 void allocate_counters(struct counters *counters)
 {
 	int i;
-	int num_cores = topo.cores_per_node * topo.nodes_per_pkg * topo.num_packages;
+	int num_cores = topo.cores_per_pkg * topo.num_packages;
 
 	counters->threads = calloc(topo.max_cpu_num + 1, sizeof(struct thread_data));
 	if (counters->threads == NULL)
Signature · 1 line
2.45.2
author maintainer
#4 lore raw

PATCH 4/9 tools/power/turbostat: Fix microcode patch level output for AMD/Hygon

In reply to Len Brown

From: Serhii Pievniev <[email protected]>

turbostat always used the same logic to read the microcode patch level, which is correct for Intel but not for AMD/Hygon.
While Intel stores the patch level in the upper 32 bits of MSR, AMD stores it in the lower 32 bits, which causes turbostat to report the microcode version as 0x0 on AMD/Hygon.

Fix by shifting right by 32 for non-AMD/Hygon, preserving the existing behavior for Intel and unknown vendors.

Fixes 3e4048466c39 ("tools/power turbostat: Add --no-msr option")
---
 tools/power/x86/turbostat/turbostat.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
tools/power/x86/turbostat/turbostat.c +6 -3
index 14021a6ed717..b985bce69142 100644
@@ -9121,10 +9121,13 @@ void process_cpuid()
 	cpuid_has_hv = ecx_flags & (1 << 31);
 
 	if (!no_msr) {
-		if (get_msr(sched_getcpu(), MSR_IA32_UCODE_REV, &ucode_patch))
+		if (get_msr(sched_getcpu(), MSR_IA32_UCODE_REV, &ucode_patch)) {
 			warnx("get_msr(UCODE)");
-		else
+		} else {
 			ucode_patch_valid = true;
+			if (!authentic_amd && !hygon_genuine)
+				ucode_patch >>= 32;
+		}
 	}
 
 	/*
@@ -9138,7 +9141,7 @@ void process_cpuid()
 	if (!quiet) {
 		fprintf(outf, "CPUID(1): family:model:stepping 0x%x:%x:%x (%d:%d:%d)", family, model, stepping, family, model, stepping);
 		if (ucode_patch_valid)
-			fprintf(outf, " microcode 0x%x", (unsigned int)((ucode_patch >> 32) & 0xFFFFFFFF));
+			fprintf(outf, " microcode 0x%x", (unsigned int)ucode_patch);
 		fputc('\n', outf);
 
 		fprintf(outf, "CPUID(0x80000000): max_extended_levels: 0x%x\n", max_extended_level);
Signature · 1 line
2.45.2
author maintainer
#5 lore raw

PATCH 5/9 tools/power turbostat: Consistently use print_float_value()

In reply to Len Brown

From: Artem Bityutskiy <[email protected]>

Fix the PMT thread code to use print_float_value(), to be consistent with the PMT core and package code.

[lenb: commit message]
---
 tools/power/x86/turbostat/turbostat.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
tools/power/x86/turbostat/turbostat.c +2 -2
index b985bce69142..9744f9caac9a 100644
@@ -3489,12 +3489,12 @@ int format_counters(PER_THREAD_PARAMS)
 
 		case PMT_TYPE_XTAL_TIME:
 			value_converted = pct(value_raw / crystal_hz, interval_float);
-			outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), value_converted);
+			outp += print_float_value(&printed, delim, value_converted);
 			break;
 
 		case PMT_TYPE_TCORE_CLOCK:
 			value_converted = pct(value_raw / tcore_clock_freq_hz, interval_float);
-			outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), value_converted);
+			outp += print_float_value(&printed, delim, value_converted);
 		}
 	}
 
Signature · 1 line
2.45.2
author maintainer
#6 lore raw

PATCH 6/9 tools/power turbostat: Fix incorrect format variable

In reply to Len Brown

From: Artem Bityutskiy <[email protected]>

In the perf thread, core, and package counter loops, an incorrect 'mp->format' variable is used instead of 'pp->format'.

[lenb: edit commit message]
Fixes 696d15cbd8c2 ("tools/power turbostat: Refactor floating point printout code")
---
 tools/power/x86/turbostat/turbostat.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
tools/power/x86/turbostat/turbostat.c +3 -3
index 9744f9caac9a..4d954533c71d 100644
@@ -3468,7 +3468,7 @@ int format_counters(PER_THREAD_PARAMS)
 	for (i = 0, pp = sys.perf_tp; pp; ++i, pp = pp->next) {
 		if (pp->format == FORMAT_RAW)
 			outp += print_hex_value(pp->width, &printed, delim, t->perf_counter[i]);
-		else if (pp->format == FORMAT_DELTA || mp->format == FORMAT_AVERAGE)
+		else if (pp->format == FORMAT_DELTA || pp->format == FORMAT_AVERAGE)
 			outp += print_decimal_value(pp->width, &printed, delim, t->perf_counter[i]);
 		else if (pp->format == FORMAT_PERCENT) {
 			if (pp->type == COUNTER_USEC)
@@ -3538,7 +3538,7 @@ int format_counters(PER_THREAD_PARAMS)
 	for (i = 0, pp = sys.perf_cp; pp; i++, pp = pp->next) {
 		if (pp->format == FORMAT_RAW)
 			outp += print_hex_value(pp->width, &printed, delim, c->perf_counter[i]);
-		else if (pp->format == FORMAT_DELTA || mp->format == FORMAT_AVERAGE)
+		else if (pp->format == FORMAT_DELTA || pp->format == FORMAT_AVERAGE)
 			outp += print_decimal_value(pp->width, &printed, delim, c->perf_counter[i]);
 		else if (pp->format == FORMAT_PERCENT)
 			outp += print_float_value(&printed, delim, pct(c->perf_counter[i], tsc));
@@ -3694,7 +3694,7 @@ int format_counters(PER_THREAD_PARAMS)
 			outp += print_hex_value(pp->width, &printed, delim, p->perf_counter[i]);
 		else if (pp->type == COUNTER_K2M)
 			outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), (unsigned int)p->perf_counter[i] / 1000);
-		else if (pp->format == FORMAT_DELTA || mp->format == FORMAT_AVERAGE)
+		else if (pp->format == FORMAT_DELTA || pp->format == FORMAT_AVERAGE)
 			outp += print_decimal_value(pp->width, &printed, delim, p->perf_counter[i]);
 		else if (pp->format == FORMAT_PERCENT)
 			outp += print_float_value(&printed, delim, pct(p->perf_counter[i], tsc));
Signature · 1 line
2.45.2
author maintainer
#7 lore raw

PATCH 7/9 tools/power turbostat: Fix --show/--hide for individual cpuidle counters

In reply to Len Brown

From: Artem Bityutskiy <[email protected]>

Problem: individual swidle counter names (C1, C1+, C1-, etc.) cannot be selected via --show/--hide due to two bugs in probe_cpuidle_counts():
1. The function returns immediately when BIC_cpuidle is not enabled, without checking deferred_add_index.
2. The deferred name check runs against name_buf before the trailing newline is stripped, so is_deferred_add("C1\n") never matches "C1".

Fix:
1. Relax the early return to pass through when deferred names are queued.
2. Strip the trailing newline from name_buf before performing deferred name checks.
3. Check each suffixed variant (C1+, C1, C1-) individually so that e.g. "--show C1+" enables only the requested metric.

In addition, introduce a helper function to avoid repeating the condition (readability cleanup).

Fixes ec4acd3166d8 ("tools/power turbostat: disable "cpuidle" invocation counters, by default")
---
 tools/power/x86/turbostat/turbostat.c | 35 ++++++++++++++++-----------
 1 file changed, 21 insertions(+), 14 deletions(-)
tools/power/x86/turbostat/turbostat.c +21 -14
index 4d954533c71d..3487548841e1 100644
@@ -11285,6 +11285,14 @@ void probe_cpuidle_residency(void)
 	}
 }
 
+static bool cpuidle_counter_wanted(char *name)
+{
+	if (is_deferred_skip(name))
+		return false;
+
+	return DO_BIC(BIC_cpuidle) || is_deferred_add(name);
+}
+
 void probe_cpuidle_counts(void)
 {
 	char path[64];
@@ -11294,7 +11302,7 @@ void probe_cpuidle_counts(void)
 	int min_state = 1024, max_state = 0;
 	char *sp;
 
-	if (!DO_BIC(BIC_cpuidle))
+	if (!DO_BIC(BIC_cpuidle) && !deferred_add_index)
 		return;
 
 	for (state = 10; state >= 0; --state) {
@@ -11309,12 +11317,6 @@ void probe_cpuidle_counts(void)
 
 		remove_underbar(name_buf);
 
-		if (!DO_BIC(BIC_cpuidle) && !is_deferred_add(name_buf))
-			continue;
-
-		if (is_deferred_skip(name_buf))
-			continue;
-
 		/* truncate "C1-HSW\n" to "C1", or truncate "C1\n" to "C1" */
 		sp = strchr(name_buf, '-');
 		if (!sp)
@@ -11329,16 +11331,19 @@ void probe_cpuidle_counts(void)
 			 * Add 'C1+' for C1, and so on. The 'below' sysfs file always contains 0 for
 			 * the last state, so do not add it.
 			 */
-
 			*sp = '+';
 			*(sp + 1) = '\0';
-			sprintf(path, "cpuidle/state%d/below", state);
-			add_counter(0, path, name_buf, 64, SCOPE_CPU, COUNTER_ITEMS, FORMAT_DELTA, SYSFS_PERCPU, 0);
+			if (cpuidle_counter_wanted(name_buf)) {
+				sprintf(path, "cpuidle/state%d/below", state);
+				add_counter(0, path, name_buf, 64, SCOPE_CPU, COUNTER_ITEMS, FORMAT_DELTA, SYSFS_PERCPU, 0);
+			}
 		}
 
 		*sp = '\0';
-		sprintf(path, "cpuidle/state%d/usage", state);
-		add_counter(0, path, name_buf, 64, SCOPE_CPU, COUNTER_ITEMS, FORMAT_DELTA, SYSFS_PERCPU, 0);
+		if (cpuidle_counter_wanted(name_buf)) {
+			sprintf(path, "cpuidle/state%d/usage", state);
+			add_counter(0, path, name_buf, 64, SCOPE_CPU, COUNTER_ITEMS, FORMAT_DELTA, SYSFS_PERCPU, 0);
+		}
 
 		/*
 		 * The 'above' sysfs file always contains 0 for the shallowest state (smallest
@@ -11347,8 +11352,10 @@ void probe_cpuidle_counts(void)
 		if (state != min_state) {
 			*sp = '-';
 			*(sp + 1) = '\0';
-			sprintf(path, "cpuidle/state%d/above", state);
-			add_counter(0, path, name_buf, 64, SCOPE_CPU, COUNTER_ITEMS, FORMAT_DELTA, SYSFS_PERCPU, 0);
+			if (cpuidle_counter_wanted(name_buf)) {
+				sprintf(path, "cpuidle/state%d/above", state);
+				add_counter(0, path, name_buf, 64, SCOPE_CPU, COUNTER_ITEMS, FORMAT_DELTA, SYSFS_PERCPU, 0);
+			}
 		}
 	}
 }
Signature · 1 line
2.45.2
author maintainer
#8 lore raw

PATCH 8/9 tools/power turbostat: Fix delimiter bug in print functions

In reply to Len Brown

From: Artem Bityutskiy <[email protected]>

Commands that add counters, such as 'turbostat --show C1,C1+' display merged columns without a delimiter.

This is caused by the bad syntax: '(*printed++ ? delim : "")', shared by print_name()/print_hex_value()/print_decimal_value()/print_float_value()

Use '((*printed)++ ? delim : "")' to correctly increment the value at *printed.

[lenb: fix code and commit message typo, re-word]
Fixes 56dbb878507b ("tools/power turbostat: Refactor added column header printing")
---
 tools/power/x86/turbostat/turbostat.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
tools/power/x86/turbostat/turbostat.c +6 -6
index 3487548841e1..34e2143cd4b3 100644
@@ -2837,29 +2837,29 @@ static inline int print_name(int width, int *printed, char *delim, char *name, e
 	UNUSED(type);
 
 	if (format == FORMAT_RAW && width >= 64)
-		return (sprintf(outp, "%s%-8s", (*printed++ ? delim : ""), name));
+		return (sprintf(outp, "%s%-8s", ((*printed)++ ? delim : ""), name));
 	else
-		return (sprintf(outp, "%s%s", (*printed++ ? delim : ""), name));
+		return (sprintf(outp, "%s%s", ((*printed)++ ? delim : ""), name));
 }
 
 static inline int print_hex_value(int width, int *printed, char *delim, unsigned long long value)
 {
 	if (width <= 32)
-		return (sprintf(outp, "%s%08x", (*printed++ ? delim : ""), (unsigned int)value));
+		return (sprintf(outp, "%s%08x", ((*printed)++ ? delim : ""), (unsigned int)value));
 	else
-		return (sprintf(outp, "%s%016llx", (*printed++ ? delim : ""), value));
+		return (sprintf(outp, "%s%016llx", ((*printed)++ ? delim : ""), value));
 }
 
 static inline int print_decimal_value(int width, int *printed, char *delim, unsigned long long value)
 {
 	UNUSED(width);
 
-	return (sprintf(outp, "%s%lld", (*printed++ ? delim : ""), value));
+	return (sprintf(outp, "%s%lld", ((*printed)++ ? delim : ""), value));
 }
 
 static inline int print_float_value(int *printed, char *delim, double value)
 {
-	return (sprintf(outp, "%s%0.2f", (*printed++ ? delim : ""), value));
+	return (sprintf(outp, "%s%0.2f", ((*printed)++ ? delim : ""), value));
 }
 
 void print_header(char *delim)
Signature · 1 line
2.45.2
author maintainer
#9 lore raw

PATCH 9/9 tools/power turbostat: Allow execution to continue after perf_l2_init() failure

In reply to Len Brown

From: David Arcari <[email protected]>

Currently, if perf_l2_init() fails turbostat exits after issuing the following error (which was encountered on AlderLake):

turbostat: perf_l2_init(cpu0, 0x0, 0xff24) REFS: Invalid argument

This occurs because perf_l2_init() calls err(). However, the code has been written in such a manner that it is able to perform cleanup and continue. Therefore, this issue can be addressed by changing the appropriate calls to err() to warnx().

Additionally, correct the PMU type arguments passed to the warning strings in the ecore and lcore blocks so the logs accurately reflect the failing counter type.

---
 tools/power/x86/turbostat/turbostat.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
tools/power/x86/turbostat/turbostat.c +8 -8
index 34e2143cd4b3..e9e8ef72395a 100644
@@ -9405,13 +9405,13 @@ void perf_l2_init(void)
 		if (!is_hybrid) {
 			fd_l2_percpu[cpu] = open_perf_counter(cpu, perf_pmu_types.uniform, perf_model_support->first.refs, -1, PERF_FORMAT_GROUP);
 			if (fd_l2_percpu[cpu] == -1) {
-				err(-1, "%s(cpu%d, 0x%x, 0x%llx) REFS", __func__, cpu, perf_pmu_types.uniform, perf_model_support->first.refs);
+				warnx("%s(cpu%d, 0x%x, 0x%llx) REFS", __func__, cpu, perf_pmu_types.uniform, perf_model_support->first.refs);
 				free_fd_l2_percpu();
 				return;
 			}
 			retval = open_perf_counter(cpu, perf_pmu_types.uniform, perf_model_support->first.hits, fd_l2_percpu[cpu], PERF_FORMAT_GROUP);
 			if (retval == -1) {
-				err(-1, "%s(cpu%d, 0x%x, 0x%llx) HITS", __func__, cpu, perf_pmu_types.uniform, perf_model_support->first.hits);
+				warnx("%s(cpu%d, 0x%x, 0x%llx) HITS", __func__, cpu, perf_pmu_types.uniform, perf_model_support->first.hits);
 				free_fd_l2_percpu();
 				return;
 			}
@@ -9420,39 +9420,39 @@ void perf_l2_init(void)
 		if (perf_pcore_set && CPU_ISSET_S(cpu, cpu_possible_setsize, perf_pcore_set)) {
 			fd_l2_percpu[cpu] = open_perf_counter(cpu, perf_pmu_types.pcore, perf_model_support->first.refs, -1, PERF_FORMAT_GROUP);
 			if (fd_l2_percpu[cpu] == -1) {
-				err(-1, "%s(cpu%d, 0x%x, 0x%llx) REFS", __func__, cpu, perf_pmu_types.pcore, perf_model_support->first.refs);
+				warnx("%s(cpu%d, 0x%x, 0x%llx) REFS", __func__, cpu, perf_pmu_types.pcore, perf_model_support->first.refs);
 				free_fd_l2_percpu();
 				return;
 			}
 			retval = open_perf_counter(cpu, perf_pmu_types.pcore, perf_model_support->first.hits, fd_l2_percpu[cpu], PERF_FORMAT_GROUP);
 			if (retval == -1) {
-				err(-1, "%s(cpu%d, 0x%x, 0x%llx) HITS", __func__, cpu, perf_pmu_types.pcore, perf_model_support->first.hits);
+				warnx("%s(cpu%d, 0x%x, 0x%llx) HITS", __func__, cpu, perf_pmu_types.pcore, perf_model_support->first.hits);
 				free_fd_l2_percpu();
 				return;
 			}
 		} else if (perf_ecore_set && CPU_ISSET_S(cpu, cpu_possible_setsize, perf_ecore_set)) {
 			fd_l2_percpu[cpu] = open_perf_counter(cpu, perf_pmu_types.ecore, perf_model_support->second.refs, -1, PERF_FORMAT_GROUP);
 			if (fd_l2_percpu[cpu] == -1) {
-				err(-1, "%s(cpu%d, 0x%x, 0x%llx) REFS", __func__, cpu, perf_pmu_types.pcore, perf_model_support->second.refs);
+				warnx("%s(cpu%d, 0x%x, 0x%llx) REFS", __func__, cpu, perf_pmu_types.ecore, perf_model_support->second.refs);
 				free_fd_l2_percpu();
 				return;
 			}
 			retval = open_perf_counter(cpu, perf_pmu_types.ecore, perf_model_support->second.hits, fd_l2_percpu[cpu], PERF_FORMAT_GROUP);
 			if (retval == -1) {
-				err(-1, "%s(cpu%d, 0x%x, 0x%llx) HITS", __func__, cpu, perf_pmu_types.pcore, perf_model_support->second.hits);
+				warnx("%s(cpu%d, 0x%x, 0x%llx) HITS", __func__, cpu, perf_pmu_types.ecore, perf_model_support->second.hits);
 				free_fd_l2_percpu();
 				return;
 			}
 		} else if (perf_lcore_set && CPU_ISSET_S(cpu, cpu_possible_setsize, perf_lcore_set)) {
 			fd_l2_percpu[cpu] = open_perf_counter(cpu, perf_pmu_types.lcore, perf_model_support->third.refs, -1, PERF_FORMAT_GROUP);
 			if (fd_l2_percpu[cpu] == -1) {
-				err(-1, "%s(cpu%d, 0x%x, 0x%llx) REFS", __func__, cpu, perf_pmu_types.pcore, perf_model_support->third.refs);
+				warnx("%s(cpu%d, 0x%x, 0x%llx) REFS", __func__, cpu, perf_pmu_types.lcore, perf_model_support->third.refs);
 				free_fd_l2_percpu();
 				return;
 			}
 			retval = open_perf_counter(cpu, perf_pmu_types.lcore, perf_model_support->third.hits, fd_l2_percpu[cpu], PERF_FORMAT_GROUP);
 			if (retval == -1) {
-				err(-1, "%s(cpu%d, 0x%x, 0x%llx) HITS", __func__, cpu, perf_pmu_types.pcore, perf_model_support->third.hits);
+				warnx("%s(cpu%d, 0x%x, 0x%llx) HITS", __func__, cpu, perf_pmu_types.lcore, perf_model_support->third.hits);
 				free_fd_l2_percpu();
 				return;
 			}
Signature · 1 line
2.45.2