Skip to contentSkip to conversation

perf: support enable and disable commands in stat and record modes

PATCH Superseded Alexey Budankov 2 participants 25 messages May 6, 2020 – May 7, 2020 perf events

v2 of 12 Superseded Latest is v12 →

lore
Share & tools
lore
#0 lore raw

v2 cover perf: support enable and disable commands in stat and record modes

Changes in v2:
- renamed resume and pause commands to enable and disable ones, renamed CTL_CMD_RESUME and CTL_CMD_PAUSE to CTL_CMD_ENABLE and CTL_CMD_DISABLE to fit to the appropriate ioctls and avoid mixing up with PAUSE_OUTPUT ioctl;
- factored out event handling loop into a handle_events() for stat mode;
- separated -D,--delay=-1 into separate patches for stat and record modes;

v1: https://lore.kernel.org/lkml/[email protected]/

repo: tip of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git perf/core

The patch set implements handling of 'start disabled', 'enable' and 'disable' external control commands which can be provided for stat and record modes of the tool from an external controlling process. 'start disabled' command can be used to postpone enabling of events in the beginning of a monitoring session. 'enable' and 'disable' commands can be used to enable and disable events correspondingly any time after the start of the session.

The 'start disabled', 'enable' and 'disable' external control commands can be used to focus measurement on specially selected time intervals of workload execution. Focused measurement reduces tool intrusion and influence on workload behavior, reduces distortion and amount of collected and stored data, mitigates data accuracy loss because measurement and data capturing happen only during intervals of interest.

A controlling process can be a bash shell script [1], native executable or any other language program that can directly work with file descriptors, e.g. pipes [2], and spawn a process, specially the tool one.

-D,--delay <val> option is extended with -1 value to skip events enabling in the beginning of a monitoring session ('start disabled' command). --ctl-fd and --ctl-fd-ack command line options are introduced to provide the tool with a pair of file descriptors to listen to control commands and reply to the controlling process on the completion of received commands.

The tool reads two byte control command message from ctl-fd descriptor, handles the command and optionally replies two bytes acknowledgement message to fd-ack descriptor, if it is specified on the command line. 'enable' command is recognized as 'e' character message and 'disable' command is recognized as 'd' character message both received from ctl-fd descriptor. Completion message is 'a''\n' and sent to fd-ack descriptor.

example bash script demonstrating simple use case:

#!/bin/bash

ctl_dir=/tmp/

ctl_fifo=${ctl_dir}perf_ctl.fifo
test -p ${ctl_fifo} && unlink ${ctl_fifo}
mkfifo ${ctl_fifo} && exec {ctl_fd}<>${ctl_fifo}

ctl_ack_fifo=${ctl_dir}perf_ctl_ack.fifo
test -p ${ctl_ack_fifo} && unlink ${ctl_ack_fifo} mkfifo ${ctl_ack_fifo} && exec {ctl_fd_ack}<>${ctl_ack_fifo}

perf stat -D -1 -e cpu-cycles -a -I 1000                \
          --ctl-fd ${ctl_fd} --ctl-fd-ack ${ctl_fd_ack} \
          -- sleep 40 &

perf_pid=$!

sleep 5 && echo 'e' >&${ctl_fd} && read -u ${ctl_fd_ack} e1 && echo "enabled(${e1})" sleep 10 && echo 'd' >&${ctl_fd} && read -u ${ctl_fd_ack} d1 && echo "disabled(${d1})" sleep 5 && echo 'e' >&${ctl_fd} && read -u ${ctl_fd_ack} e2 && echo "enabled(${e2})" sleep 10 && echo 'd' >&${ctl_fd} && read -u ${ctl_fd_ack} d2 && echo "disabled(${d2})"

exec {ctl_fd_ack}>&- && unlink ${ctl_ack_fifo}
exec {ctl_fd}>&- && unlink ${ctl_fifo}

wait -n ${perf_pid}
exit $?

Script output:

[root@host acme] example
Events disabled
# time counts unit events

     1.001101062      <not counted>      cpu-cycles                                                  
     2.002994944      <not counted>      cpu-cycles                                                  
     3.004864340      <not counted>      cpu-cycles                                                  
     4.006727177      <not counted>      cpu-cycles                                                  
Events enabled
enabled(a)
     4.993808464          3,124,246      cpu-cycles                                                  
     5.008597004          3,325,624      cpu-cycles                                                  
     6.010387483         83,472,992      cpu-cycles                                                  
     7.012266598         55,877,621      cpu-cycles                                                  
     8.014175695         97,892,729      cpu-cycles                                                  
     9.016056093         68,461,242      cpu-cycles                                                  
    10.017937507         55,449,643      cpu-cycles                                                  
    11.019830154         68,938,167      cpu-cycles                                                  
    12.021719952         55,164,101      cpu-cycles                                                  
    13.023627550         70,535,720      cpu-cycles                                                  
    14.025580995         53,240,125      cpu-cycles                                                  
disabled(a)
    14.997518260         53,558,068      cpu-cycles                                                  
Events disabled
    15.027216416      <not counted>      cpu-cycles                                                  
    16.029052729      <not counted>      cpu-cycles                                                  
    17.030904762      <not counted>      cpu-cycles                                                  
    18.032073424      <not counted>      cpu-cycles                                                  
    19.033805074      <not counted>      cpu-cycles                                                  
Events enabled
enabled(a)
    20.001279097          3,021,022      cpu-cycles                                                  
    20.035044381          6,434,367      cpu-cycles                                                  
    21.036923813         89,358,251      cpu-cycles                                                  
    22.038825169         72,516,351      cpu-cycles                                                  
#           time             counts unit events
    23.040715596         55,046,157      cpu-cycles                                                  
    24.042643757         78,128,649      cpu-cycles                                                  
    25.044558535         61,052,428      cpu-cycles                                                  
    26.046452785         62,142,806      cpu-cycles                                                  
    27.048353021         74,477,971      cpu-cycles                                                  
    28.050241286         61,001,623      cpu-cycles                                                  
    29.052149961         61,653,502      cpu-cycles                                                  
disabled(a)
    30.004980264         82,729,640      cpu-cycles                                                  
Events disabled
    30.053516176      <not counted>      cpu-cycles                                                  
    31.055348366      <not counted>      cpu-cycles                                                  
    32.057202097      <not counted>      cpu-cycles                                                  
    33.059040702      <not counted>      cpu-cycles                                                  
    34.060843288      <not counted>      cpu-cycles                                                  
    35.000888624      <not counted>      cpu-cycles                                                  

[root@host acme]#

[1] http://man7.org/linux/man-pages/man1/bash.1.html
[2] http://man7.org/linux/man-pages/man2/pipe.2.html

---
Alexey Budankov (11):
perf evlist: introduce control file descriptors
perf evlist: implement control command handling functions perf stat: factor out event handling loop into a function perf stat: extend -D,--delay option with -1 value
perf stat: implement control commands handling
perf stat: introduce --ctl-fd[-ack] options
perf docs: extend stat mode docs with info on --ctl-fd[-ack] options perf record: extend -D,--delay option with -1 value
perf record: implement control commands handling
perf record: introduce --ctl-fd[-ack] options
perf docs: extend record mode docs with info on --ctl-fd[-ack] options

 tools/perf/Documentation/perf-record.txt |  39 +++++++
 tools/perf/Documentation/perf-stat.txt   |  40 +++++++
 tools/perf/builtin-record.c              |  39 ++++++-
 tools/perf/builtin-stat.c                | 137 ++++++++++++++++-------
 tools/perf/builtin-trace.c               |   2 +-
 tools/perf/util/evlist.c                 | 103 +++++++++++++++++
 tools/perf/util/evlist.h                 |  18 +++
 tools/perf/util/record.h                 |   4 +-
 tools/perf/util/stat.h                   |   4 +-
 9 files changed, 339 insertions(+), 47 deletions(-)
Signature · 1 line
2.24.1
#1 lore raw

PATCH v2 1/11 perf evlist: introduce control file descriptors

Define and initialize control file descriptors.

---
 tools/perf/util/evlist.c | 3 +++
 tools/perf/util/evlist.h | 3 +++
 2 files changed, 6 insertions(+)
tools/perf/util/evlist.c +3 -0
index 0a0b760d6948..2db4bedc4f81 100644
@@ -63,6 +63,9 @@ void evlist__init(struct evlist *evlist, struct perf_cpu_map *cpus,
 	perf_evlist__set_maps(&evlist->core, cpus, threads);
 	evlist->workload.pid = -1;
 	evlist->bkw_mmap_state = BKW_MMAP_NOTREADY;
+	evlist->ctl_fd = -1;
+	evlist->ctl_fd_ack = -1;
+	evlist->ctl_fd_pos = -1;
 }
 
 struct evlist *evlist__new(void)
tools/perf/util/evlist.h +3 -0
index b6f325dfb4d2..62f259d89b41 100644
@@ -74,6 +74,9 @@ struct evlist {
 		pthread_t		th;
 		volatile int		done;
 	} thread;
+	int		ctl_fd;
+	int		ctl_fd_ack;
+	int		ctl_fd_pos;
 };
 
 struct evsel_str_handler {
Signature · 1 line
2.24.1
#2 lore raw

PATCH v2 2/11 perf evlist: implement control command handling functions

In reply to Alexey Budankov

Implement functions of initialization, finalization and processing of control commands coming from control file descriptors.

---
 tools/perf/util/evlist.c | 100 +++++++++++++++++++++++++++++++++++++++
 tools/perf/util/evlist.h |  12 +++++
 2 files changed, 112 insertions(+)
tools/perf/util/evlist.c +100 -0
index 2db4bedc4f81..e086c846ef3a 100644
@@ -1707,3 +1707,103 @@ struct evsel *perf_evlist__reset_weak_group(struct evlist *evsel_list,
 	}
 	return leader;
 }
+
+int perf_evlist__initialize_ctlfd(struct evlist *evlist, int ctl_fd, int ctl_fd_ack)
+{
+	if (ctl_fd == -1) {
+		pr_debug("Control descriptor is not initialized\n");
+		return 0;
+	}
+
+	evlist->ctl_fd_pos = perf_evlist__add_pollfd(&evlist->core, ctl_fd, NULL, POLLIN);
+	if (evlist->ctl_fd_pos < 0) {
+		evlist->ctl_fd_pos = -1;
+		pr_err("Failed to add ctl fd entry: %m\n");
+		return -1;
+	}
+
+	evlist->ctl_fd = ctl_fd;
+	evlist->ctl_fd_ack = ctl_fd_ack;
+
+	return 0;
+}
+
+int perf_evlist__finalize_ctlfd(struct evlist *evlist)
+{
+	if (evlist->ctl_fd_pos == -1)
+		return 0;
+
+	evlist->core.pollfd.entries[evlist->ctl_fd_pos].fd = -1;
+	evlist->ctl_fd_pos = -1;
+	evlist->ctl_fd_ack = -1;
+	evlist->ctl_fd = -1;
+
+	return 0;
+}
+
+static int perf_evlist__ctlfd_recv(struct evlist *evlist, enum evlist_ctl_cmd *cmd)
+{
+	int err;
+	char buf[2];
+
+	err = read(evlist->ctl_fd, &buf, sizeof(buf));
+	if (err > 0)
+		*cmd = buf[0];
+	else if (err == -1)
+		pr_err("Failed to read from ctlfd %d: %m\n", evlist->ctl_fd);
+
+	return err;
+}
+
+static int perf_evlist__ctlfd_ack(struct evlist *evlist)
+{
+	int err;
+	char buf[2] = {CTL_CMD_ACK, '\n'};
+
+	if (evlist->ctl_fd_ack == -1)
+		return 0;
+
+	err = write(evlist->ctl_fd_ack, buf, sizeof(buf));
+	if (err == -1)
+		pr_err("failed to write to ctl_ack_fd %d: %m\n", evlist->ctl_fd_ack);
+
+	return err;
+}
+
+int perf_evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd)
+{
+	int err = 0;
+	int ctlfd_pos = evlist->ctl_fd_pos;
+	struct pollfd *entries = evlist->core.pollfd.entries;
+
+	if (!entries[ctlfd_pos].revents)
+		return 0;
+
+	if (entries[ctlfd_pos].revents & POLLIN) {
+		err = perf_evlist__ctlfd_recv(evlist, cmd);
+		if (err > 0) {
+			switch (*cmd) {
+			case CTL_CMD_ENABLE:
+				evlist__enable(evlist);
+				break;
+			case CTL_CMD_DISABLE:
+				evlist__disable(evlist);
+				break;
+			case CTL_CMD_ACK:
+			case CTL_CMD_UNSUPPORTED:
+			default:
+				pr_debug("ctlfd: unsupported %d\n", *cmd);
+				break;
+			}
+			if (!(*cmd == CTL_CMD_ACK || *cmd == CTL_CMD_UNSUPPORTED))
+				perf_evlist__ctlfd_ack(evlist);
+		}
+	}
+
+	if (entries[ctlfd_pos].revents & (POLLHUP | POLLERR))
+		perf_evlist__finalize_ctlfd(evlist);
+	else
+		entries[ctlfd_pos].revents = 0;
+
+	return err;
+}
tools/perf/util/evlist.h +12 -0
index 62f259d89b41..84386850c290 100644
@@ -358,4 +358,16 @@ void perf_evlist__force_leader(struct evlist *evlist);
 struct evsel *perf_evlist__reset_weak_group(struct evlist *evlist,
 						 struct evsel *evsel,
 						bool close);
+
+enum evlist_ctl_cmd {
+	CTL_CMD_UNSUPPORTED = 0,
+	CTL_CMD_ENABLE = 'e',
+	CTL_CMD_DISABLE = 'd',
+	CTL_CMD_ACK = 'a'
+};
+
+int perf_evlist__initialize_ctlfd(struct evlist *evlist, int ctl_fd, int ctl_fd_ack);
+int perf_evlist__finalize_ctlfd(struct evlist *evlist);
+int perf_evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd);
+
 #endif /* __PERF_EVLIST_H */
Signature · 1 line
2.24.1
#3 lore raw

Re: [PATCH v2 02/11] perf evlist: implement control command handling functions

Em Wed, May 06, 2020 at 09:19:22PM +0300, Alexey Budankov escreveu:

Quoted 123 lines

Implement functions of initialization, finalization and processing of control commands coming from control file descriptors.

---
 tools/perf/util/evlist.c | 100 +++++++++++++++++++++++++++++++++++++++
 tools/perf/util/evlist.h |  12 +++++
 2 files changed, 112 insertions(+)
tools/perf/util/evlist.c +100 -0
index 2db4bedc4f81..e086c846ef3a 100644
@@ -1707,3 +1707,103 @@ struct evsel *perf_evlist__reset_weak_group(struct evlist *evsel_list,
 	}
 	return leader;
 }
+
+int perf_evlist__initialize_ctlfd(struct evlist *evlist, int ctl_fd, int ctl_fd_ack)
+{
+	if (ctl_fd == -1) {
+		pr_debug("Control descriptor is not initialized\n");
+		return 0;
+	}
+
+	evlist->ctl_fd_pos = perf_evlist__add_pollfd(&evlist->core, ctl_fd, NULL, POLLIN);
+	if (evlist->ctl_fd_pos < 0) {
+		evlist->ctl_fd_pos = -1;
+		pr_err("Failed to add ctl fd entry: %m\n");
+		return -1;
+	}
+
+	evlist->ctl_fd = ctl_fd;
+	evlist->ctl_fd_ack = ctl_fd_ack;
+
+	return 0;
+}
+
+int perf_evlist__finalize_ctlfd(struct evlist *evlist)
+{
+	if (evlist->ctl_fd_pos == -1)
+		return 0;
+
+	evlist->core.pollfd.entries[evlist->ctl_fd_pos].fd = -1;
+	evlist->ctl_fd_pos = -1;
+	evlist->ctl_fd_ack = -1;
+	evlist->ctl_fd = -1;
+
+	return 0;
+}
+
+static int perf_evlist__ctlfd_recv(struct evlist *evlist, enum evlist_ctl_cmd *cmd)
+{
+	int err;
+	char buf[2];
+
+	err = read(evlist->ctl_fd, &buf, sizeof(buf));
+	if (err > 0)
+		*cmd = buf[0];
+	else if (err == -1)
+		pr_err("Failed to read from ctlfd %d: %m\n", evlist->ctl_fd);
+
+	return err;
+}
+
+static int perf_evlist__ctlfd_ack(struct evlist *evlist)
+{
+	int err;
+	char buf[2] = {CTL_CMD_ACK, '\n'};
+
+	if (evlist->ctl_fd_ack == -1)
+		return 0;
+
+	err = write(evlist->ctl_fd_ack, buf, sizeof(buf));
+	if (err == -1)
+		pr_err("failed to write to ctl_ack_fd %d: %m\n", evlist->ctl_fd_ack);
+
+	return err;
+}
+
+int perf_evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd)
+{
+	int err = 0;
+	int ctlfd_pos = evlist->ctl_fd_pos;
+	struct pollfd *entries = evlist->core.pollfd.entries;
+
+	if (!entries[ctlfd_pos].revents)
+		return 0;
+
+	if (entries[ctlfd_pos].revents & POLLIN) {
+		err = perf_evlist__ctlfd_recv(evlist, cmd);
+		if (err > 0) {
+			switch (*cmd) {
+			case CTL_CMD_ENABLE:
+				evlist__enable(evlist);
+				break;
+			case CTL_CMD_DISABLE:
+				evlist__disable(evlist);
+				break;
+			case CTL_CMD_ACK:
+			case CTL_CMD_UNSUPPORTED:
+			default:
+				pr_debug("ctlfd: unsupported %d\n", *cmd);
+				break;
+			}
+			if (!(*cmd == CTL_CMD_ACK || *cmd == CTL_CMD_UNSUPPORTED))
+				perf_evlist__ctlfd_ack(evlist);
+		}
+	}
+
+	if (entries[ctlfd_pos].revents & (POLLHUP | POLLERR))
+		perf_evlist__finalize_ctlfd(evlist);
+	else
+		entries[ctlfd_pos].revents = 0;
+
+	return err;
+}
tools/perf/util/evlist.h +0 -0
index 62f259d89b41..84386850c290 100644

tools/perf/util/evlist.h void perf_evlist__force_leader(struct evlist *evlist); · line 367

Quoted 10 lines
tools/perf/util/evlist.h +7 -0
@@ -358,4 +358,16 @@ void perf_evlist__force_leader(struct evlist *evlist);
 struct evsel *perf_evlist__reset_weak_group(struct evlist *evlist,
 						 struct evsel *evsel,
 						bool close);
+
+enum evlist_ctl_cmd {
+	CTL_CMD_UNSUPPORTED = 0,
+	CTL_CMD_ENABLE = 'e',
+	CTL_CMD_DISABLE = 'd',
+	CTL_CMD_ACK = 'a'
+};

Can we make this a string, I think we'll eventually ask for lots more stuff, like asking for a --switch-output snapshot with --overwrite, reconfiguring events to increase/decrease frequency, etc, interfacing with PERF_EVENT_IOC_MODIFY_ATTRIBUTES, PERF_EVENT_IOC_SET_FILTER, etc.

This will also allow us to have parameters, etc, wdyt?

Also please since these are events that deal with 'struct evlist', name them with the evlist__ prefix, not the perf_evlist__ one, as those should be used with 'struct perf_evlist', i.e. the one in libperf (tools/lib/perf/).

Right now this is inconsistent, we did it that way to minimize disruption of the codebase when moving things from tools/perf/ to tools/lib/perf/, but this confuses things and I just did a s/perf_evsel__/evsel__) for things dealing with 'struct evsel', so lets not add new ones with the wrong prefix, eventually we'll have perf_ only for things in libperf.

Quoted 10 lines
tools/perf/util/evlist.h +5 -0
+
+int perf_evlist__initialize_ctlfd(struct evlist *evlist, int ctl_fd, int ctl_fd_ack);
+int perf_evlist__finalize_ctlfd(struct evlist *evlist);
+int perf_evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd);
+
 #endif /* __PERF_EVLIST_H */
Signature · 1 line
2.24.1
Signature · 1 line
- Arnaldo
#4 lore raw

Re: [PATCH v2 02/11] perf evlist: implement control command handling functions

Quoted 10 lines · Arnaldo Carvalho de Melo

Em Wed, May 06, 2020 at 09:19:22PM +0300, Alexey Budankov escreveu:

Quoted 9 lines

Implement functions of initialization, finalization and processing of control commands coming from control file descriptors.

---
 tools/perf/util/evlist.c | 100 +++++++++++++++++++++++++++++++++++++++
 tools/perf/util/evlist.h |  12 +++++
 2 files changed, 112 insertions(+)

<SNIP>

Quoted 9 lines
Quoted 9 lines
tools/perf/util/evlist.h +1 -0
index 62f259d89b41..84386850c290 100644
@@ -358,4 +358,16 @@ void perf_evlist__force_leader(struct evlist *evlist);
 struct evsel *perf_evlist__reset_weak_group(struct evlist *evlist,
 						 struct evsel *evsel,
 						bool close);
+
Quoted 8 lines

tools/perf/util/evlist.h void perf_evlist__force_leader(struct evlist *evlist); · line 367

Quoted 6 lines
tools/perf/util/evlist.h +6 -0
+enum evlist_ctl_cmd {
+	CTL_CMD_UNSUPPORTED = 0,
+	CTL_CMD_ENABLE = 'e',
+	CTL_CMD_DISABLE = 'd',
+	CTL_CMD_ACK = 'a'
+};

Can we make this a string, I think we'll eventually ask for lots more

Like this?

#define EVLIST__CTL_CMD_ENABLE "enable"
#define EVLIST__CTL_CMD_DISABLE "disable"
#define EVLIST__CTL_CMD_ACK "ack"

Quoted 5 lines

stuff, like asking for a --switch-output snapshot with --overwrite, reconfiguring events to increase/decrease frequency, etc, interfacing with PERF_EVENT_IOC_MODIFY_ATTRIBUTES, PERF_EVENT_IOC_SET_FILTER, etc.

This will also allow us to have parameters, etc, wdyt?

Being a part of this patch the extension will implement configurability that potentially could never be used.

Switch from int to string commands of variable length belongs to the patches also implementing usage of that string commands.

Quoted 5 lines

Also please since these are events that deal with 'struct evlist', name them with the evlist__ prefix, not the perf_evlist__ one, as those should be used with 'struct perf_evlist', i.e. the one in libperf (tools/lib/perf/).

Accepted in v3.

Quoted 19 lines

Right now this is inconsistent, we did it that way to minimize disruption of the codebase when moving things from tools/perf/ to tools/lib/perf/, but this confuses things and I just did a s/perf_evsel__/evsel__) for things dealing with 'struct evsel', so lets not add new ones with the wrong prefix, eventually we'll have perf_ only for things in libperf.

Quoted 10 lines
tools/perf/util/evlist.h +5 -0
+
+int perf_evlist__initialize_ctlfd(struct evlist *evlist, int ctl_fd, int ctl_fd_ack);
+int perf_evlist__finalize_ctlfd(struct evlist *evlist);
+int perf_evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd);
+
 #endif /* __PERF_EVLIST_H */
Signature · 1 line
2.24.1
#5 lore raw

Re: [PATCH v2 02/11] perf evlist: implement control command handling functions

Em Thu, May 07, 2020 at 11:32:53AM +0300, Alexey Budankov escreveu:

Quoted 33 lines · Arnaldo Carvalho de Melo
Quoted 10 lines

Em Wed, May 06, 2020 at 09:19:22PM +0300, Alexey Budankov escreveu:

Quoted 9 lines

Implement functions of initialization, finalization and processing of control commands coming from control file descriptors.

---
 tools/perf/util/evlist.c | 100 +++++++++++++++++++++++++++++++++++++++
 tools/perf/util/evlist.h |  12 +++++
 2 files changed, 112 insertions(+)

<SNIP>

Quoted 9 lines
Quoted 9 lines
tools/perf/util/evlist.h +1 -0
index 62f259d89b41..84386850c290 100644
@@ -358,4 +358,16 @@ void perf_evlist__force_leader(struct evlist *evlist);
 struct evsel *perf_evlist__reset_weak_group(struct evlist *evlist,
 						 struct evsel *evsel,
 						bool close);
+
Quoted 8 lines

tools/perf/util/evlist.h void perf_evlist__force_leader(struct evlist *evlist); · line 367

Quoted 6 lines
tools/perf/util/evlist.h +6 -0
+enum evlist_ctl_cmd {
+	CTL_CMD_UNSUPPORTED = 0,
+	CTL_CMD_ENABLE = 'e',
+	CTL_CMD_DISABLE = 'd',
+	CTL_CMD_ACK = 'a'
+};

Can we make this a string, I think we'll eventually ask for lots more

Quoted 5 lines

Like this?

#define EVLIST__CTL_CMD_ENABLE "enable"
#define EVLIST__CTL_CMD_DISABLE "disable"
#define EVLIST__CTL_CMD_ACK "ack"

Yeah

Quoted 11 lines
Quoted 5 lines

stuff, like asking for a --switch-output snapshot with --overwrite, reconfiguring events to increase/decrease frequency, etc, interfacing with PERF_EVENT_IOC_MODIFY_ATTRIBUTES, PERF_EVENT_IOC_SET_FILTER, etc.

This will also allow us to have parameters, etc, wdyt?

Being a part of this patch the extension will implement configurability that potentially could never be used.

Switch from int to string commands of variable length belongs to the patches also implementing usage of that string commands.

Well, at that point we would have to support both, i.e. the way you're doing now with integers, and as strings, otherwise 3rd party tooling (vtune? :)) using this interface would break.

I.e. this is like the syscall interface.

So if we have "enable" now we can go ahead and forever understand that as "please enable this evlist", but in the future we can extend it and pass parameters to it, to control how that enablement will take place, perhaps with a delay, etc.

Quoted 26 lines
Quoted 4 lines

Also please since these are events that deal with 'struct evlist', name them with the evlist__ prefix, not the perf_evlist__ one, as those should be used with 'struct perf_evlist', i.e. the one in libperf (tools/lib/perf/).

Accepted in v3.

Quoted 19 lines

Right now this is inconsistent, we did it that way to minimize disruption of the codebase when moving things from tools/perf/ to tools/lib/perf/, but this confuses things and I just did a s/perf_evsel__/evsel__) for things dealing with 'struct evsel', so lets not add new ones with the wrong prefix, eventually we'll have perf_ only for things in libperf.

Quoted 10 lines
tools/perf/util/evlist.h +5 -0
+
+int perf_evlist__initialize_ctlfd(struct evlist *evlist, int ctl_fd, int ctl_fd_ack);
+int perf_evlist__finalize_ctlfd(struct evlist *evlist);
+int perf_evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd);
+
 #endif /* __PERF_EVLIST_H */
Signature · 1 line
2.24.1
Signature · 1 line
- Arnaldo
#6 lore raw

Re: [PATCH v2 02/11] perf evlist: implement control command handling functions

Quoted 34 lines · Arnaldo Carvalho de Melo

Em Thu, May 07, 2020 at 11:32:53AM +0300, Alexey Budankov escreveu:

Quoted 33 lines · Arnaldo Carvalho de Melo
Quoted 10 lines

Em Wed, May 06, 2020 at 09:19:22PM +0300, Alexey Budankov escreveu:

Quoted 9 lines

Implement functions of initialization, finalization and processing of control commands coming from control file descriptors.

---
 tools/perf/util/evlist.c | 100 +++++++++++++++++++++++++++++++++++++++
 tools/perf/util/evlist.h |  12 +++++
 2 files changed, 112 insertions(+)

<SNIP>

Quoted 17 lines
Quoted 5 lines
tools/perf/util/evlist.h +0 -0
index 62f259d89b41..84386850c290 100644

tools/perf/util/evlist.h void perf_evlist__force_leader(struct evlist *evlist); · line 367

Quoted 10 lines
tools/perf/util/evlist.h +7 -0
@@ -358,4 +358,16 @@ void perf_evlist__force_leader(struct evlist *evlist);
 struct evsel *perf_evlist__reset_weak_group(struct evlist *evlist,
 						 struct evsel *evsel,
 						bool close);
+
+enum evlist_ctl_cmd {
+	CTL_CMD_UNSUPPORTED = 0,
+	CTL_CMD_ENABLE = 'e',
+	CTL_CMD_DISABLE = 'd',
+	CTL_CMD_ACK = 'a'
+};

Can we make this a string, I think we'll eventually ask for lots more

Quoted 7 lines
Quoted 5 lines

Like this?

#define EVLIST__CTL_CMD_ENABLE "enable"
#define EVLIST__CTL_CMD_DISABLE "disable"
#define EVLIST__CTL_CMD_ACK "ack"

Yeah

Well, ok. Accepted in v3.
Command becomes of variable length of chars + \n,
in comparison to current single char + \n.

Quoted 51 lines
Quoted 5 lines
Quoted 5 lines

stuff, like asking for a --switch-output snapshot with --overwrite, reconfiguring events to increase/decrease frequency, etc, interfacing with PERF_EVENT_IOC_MODIFY_ATTRIBUTES, PERF_EVENT_IOC_SET_FILTER, etc.

Quoted 7 lines
Quoted 1 line

This will also allow us to have parameters, etc, wdyt?

Being a part of this patch the extension will implement configurability that potentially could never be used.

Switch from int to string commands of variable length belongs to the patches also implementing usage of that string commands.

Well, at that point we would have to support both, i.e. the way you're doing now with integers, and as strings, otherwise 3rd party tooling (vtune? :)) using this interface would break.

I.e. this is like the syscall interface.

So if we have "enable" now we can go ahead and forever understand that as "please enable this evlist", but in the future we can extend it and pass parameters to it, to control how that enablement will take place, perhaps with a delay, etc.

Quoted 26 lines
Quoted 4 lines

Also please since these are events that deal with 'struct evlist', name them with the evlist__ prefix, not the perf_evlist__ one, as those should be used with 'struct perf_evlist', i.e. the one in libperf (tools/lib/perf/).

Accepted in v3.

Quoted 19 lines

Right now this is inconsistent, we did it that way to minimize disruption of the codebase when moving things from tools/perf/ to tools/lib/perf/, but this confuses things and I just did a s/perf_evsel__/evsel__) for things dealing with 'struct evsel', so lets not add new ones with the wrong prefix, eventually we'll have perf_ only for things in libperf.

Quoted 10 lines
tools/perf/util/evlist.h +5 -0
+
+int perf_evlist__initialize_ctlfd(struct evlist *evlist, int ctl_fd, int ctl_fd_ack);
+int perf_evlist__finalize_ctlfd(struct evlist *evlist);
+int perf_evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd);
+
 #endif /* __PERF_EVLIST_H */
Signature · 1 line
2.24.1
#7 lore raw

PATCH v2 3/11 perf stat: factor out event handling loop into a function

In reply to Alexey Budankov

Factor out event handling loop into handle_events() function.

---
 tools/perf/builtin-stat.c | 85 +++++++++++++++++++++++----------------
 1 file changed, 50 insertions(+), 35 deletions(-)
tools/perf/builtin-stat.c +50 -35
index e0c1ad23c768..9775b0905146 100644
@@ -371,6 +371,16 @@ static void process_interval(void)
 	print_counters(&rs, 0, NULL);
 }
 
+static bool print_interval_and_stop(struct perf_stat_config *config, int *times)
+{
+	if (config->interval) {
+		process_interval();
+		if (interval_count && !(--(*times)))
+			return true;
+	}
+	return false;
+}
+
 static void enable_counters(void)
 {
 	if (stat_config.initial_delay)
@@ -436,6 +446,42 @@ static bool is_target_alive(struct target *_target,
 	return false;
 }
 
+static int handle_events(pid_t pid, struct perf_stat_config *config)
+{
+	pid_t child = 0;
+	bool res, stop = false;
+	struct timespec time_to_sleep;
+	int sleep_time, status = 0, times = config->times;
+
+	if (config->interval)
+		sleep_time = config->interval;
+	else if (config->timeout)
+		sleep_time = config->timeout;
+	else
+		sleep_time = 1000;
+
+	time_to_sleep.tv_sec  = sleep_time / MSEC_PER_SEC;
+	time_to_sleep.tv_nsec = (sleep_time % MSEC_PER_SEC) * NSEC_PER_MSEC;
+
+	do {
+		if (pid != -1)
+			child = waitpid(pid, &status, WNOHANG);
+		if (child || stop || done)
+			break;
+		nanosleep(&time_to_sleep, NULL);
+		if (pid == -1)
+			stop = !is_target_alive(&target, evsel_list->core.threads);
+		if (config->timeout) {
+			stop = !stop ? true : stop;
+		} else {
+			res = print_interval_and_stop(config, &times);
+			stop = !stop ? res : stop;
+		}
+	} while (1);
+
+	return status;
+}
+
 enum counter_recovery {
 	COUNTER_SKIP,
 	COUNTER_RETRY,
@@ -494,12 +540,10 @@ static enum counter_recovery stat_handle_error(struct evsel *counter)
 static int __run_perf_stat(int argc, const char **argv, int run_idx)
 {
 	int interval = stat_config.interval;
-	int times = stat_config.times;
 	int timeout = stat_config.timeout;
 	char msg[BUFSIZ];
 	unsigned long long t0, t1;
 	struct evsel *counter;
-	struct timespec ts;
 	size_t l;
 	int status = 0;
 	const bool forks = (argc > 0);
@@ -508,17 +552,6 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 	int i, cpu;
 	bool second_pass = false;
 
-	if (interval) {
-		ts.tv_sec  = interval / USEC_PER_MSEC;
-		ts.tv_nsec = (interval % USEC_PER_MSEC) * NSEC_PER_MSEC;
-	} else if (timeout) {
-		ts.tv_sec  = timeout / USEC_PER_MSEC;
-		ts.tv_nsec = (timeout % USEC_PER_MSEC) * NSEC_PER_MSEC;
-	} else {
-		ts.tv_sec  = 1;
-		ts.tv_nsec = 0;
-	}
-
 	if (forks) {
 		if (perf_evlist__prepare_workload(evsel_list, &target, argv, is_pipe,
 						  workload_exec_failed_signal) < 0) {
@@ -675,16 +708,9 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 		perf_evlist__start_workload(evsel_list);
 		enable_counters();
 
-		if (interval || timeout) {
-			while (!waitpid(child_pid, &status, WNOHANG)) {
-				nanosleep(&ts, NULL);
-				if (timeout)
-					break;
-				process_interval();
-				if (interval_count && !(--times))
-					break;
-			}
-		}
+		if (interval || timeout)
+			handle_events(child_pid, &stat_config);
+
 		if (child_pid != -1) {
 			if (timeout)
 				kill(child_pid, SIGTERM);
@@ -701,18 +727,7 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 			psignal(WTERMSIG(status), argv[0]);
 	} else {
 		enable_counters();
-		while (!done) {
-			nanosleep(&ts, NULL);
-			if (!is_target_alive(&target, evsel_list->core.threads))
-				break;
-			if (timeout)
-				break;
-			if (interval) {
-				process_interval();
-				if (interval_count && !(--times))
-					break;
-			}
-		}
+		handle_events(-1, &stat_config);
 	}
 
 	disable_counters();
Signature · 1 line
2.24.1
#8 lore raw

PATCH v2 4/11 perf stat: extend -D,--delay option with -1 value

In reply to Alexey Budankov

Extend -D,--delay option with -1 value to start monitoring with events disabled to be enabled later by enable command provided via control file descriptor.

---
 tools/perf/builtin-stat.c | 18 ++++++++++++++----
 tools/perf/util/evlist.h  |  3 +++
 tools/perf/util/stat.h    |  2 +-
 3 files changed, 18 insertions(+), 5 deletions(-)
tools/perf/builtin-stat.c +14 -4
index 9775b0905146..bda777ca0420 100644
@@ -383,16 +383,26 @@ static bool print_interval_and_stop(struct perf_stat_config *config, int *times)
 
 static void enable_counters(void)
 {
-	if (stat_config.initial_delay)
+	if (stat_config.initial_delay < 0) {
+		pr_info(PERF_EVLIST__DISABLED_MSG);
+		return;
+	}
+
+	if (stat_config.initial_delay > 0) {
+		pr_info(PERF_EVLIST__DISABLED_MSG);
 		usleep(stat_config.initial_delay * USEC_PER_MSEC);
+	}
 
 	/*
 	 * We need to enable counters only if:
 	 * - we don't have tracee (attaching to task or cpu)
 	 * - we have initial delay configured
 	 */
-	if (!target__none(&target) || stat_config.initial_delay)
+	if (!target__none(&target) || stat_config.initial_delay) {
 		evlist__enable(evsel_list);
+		if (stat_config.initial_delay > 0)
+			pr_info(PERF_EVLIST__ENABLED_MSG);
+	}
 }
 
 static void disable_counters(void)
@@ -929,8 +939,8 @@ static struct option stat_options[] = {
 		     "aggregate counts per thread", AGGR_THREAD),
 	OPT_SET_UINT(0, "per-node", &stat_config.aggr_mode,
 		     "aggregate counts per numa node", AGGR_NODE),
-	OPT_UINTEGER('D', "delay", &stat_config.initial_delay,
-		     "ms to wait before starting measurement after program start"),
+	OPT_INTEGER('D', "delay", &stat_config.initial_delay,
+		    "ms to wait before starting measurement after program start (-1: start with events disabled"),
 	OPT_CALLBACK_NOOPT(0, "metric-only", &stat_config.metric_only, NULL,
 			"Only print computed metrics. No raw values", enable_metric_only),
 	OPT_BOOLEAN(0, "topdown", &topdown_run,
tools/perf/util/evlist.h +3 -0
index 84386850c290..874ecf068ac9 100644
@@ -366,6 +366,9 @@ enum evlist_ctl_cmd {
 	CTL_CMD_ACK = 'a'
 };
 
+#define PERF_EVLIST__ENABLED_MSG "Events enabled\n"
+#define PERF_EVLIST__DISABLED_MSG "Events disabled\n"
+
 int perf_evlist__initialize_ctlfd(struct evlist *evlist, int ctl_fd, int ctl_fd_ack);
 int perf_evlist__finalize_ctlfd(struct evlist *evlist);
 int perf_evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd);
tools/perf/util/stat.h +1 -1
index b4fdfaa7f2c0..027b9dcd902f 100644
@@ -113,7 +113,7 @@ struct perf_stat_config {
 	FILE			*output;
 	unsigned int		 interval;
 	unsigned int		 timeout;
-	unsigned int		 initial_delay;
+	int			 initial_delay;
 	unsigned int		 unit_width;
 	unsigned int		 metric_only_len;
 	int			 times;
Signature · 1 line
2.24.1
#9 lore raw

Re: [PATCH v2 04/11] perf stat: extend -D,--delay option with -1 value

Em Wed, May 06, 2020 at 09:20:54PM +0300, Alexey Budankov escreveu:

Quoted 10 lines

Extend -D,--delay option with -1 value to start monitoring with events disabled to be enabled later by enable command provided via control file descriptor.

---
 tools/perf/builtin-stat.c | 18 ++++++++++++++----
 tools/perf/util/evlist.h  |  3 +++
 tools/perf/util/stat.h    |  2 +-

You forgot to update tools/perf/Documentation/perf-stat.h

Quoted 77 lines
 3 files changed, 18 insertions(+), 5 deletions(-)
tools/perf/builtin-stat.c +14 -4
index 9775b0905146..bda777ca0420 100644
@@ -383,16 +383,26 @@ static bool print_interval_and_stop(struct perf_stat_config *config, int *times)
 
 static void enable_counters(void)
 {
-	if (stat_config.initial_delay)
+	if (stat_config.initial_delay < 0) {
+		pr_info(PERF_EVLIST__DISABLED_MSG);
+		return;
+	}
+
+	if (stat_config.initial_delay > 0) {
+		pr_info(PERF_EVLIST__DISABLED_MSG);
 		usleep(stat_config.initial_delay * USEC_PER_MSEC);
+	}
 
 	/*
 	 * We need to enable counters only if:
 	 * - we don't have tracee (attaching to task or cpu)
 	 * - we have initial delay configured
 	 */
-	if (!target__none(&target) || stat_config.initial_delay)
+	if (!target__none(&target) || stat_config.initial_delay) {
 		evlist__enable(evsel_list);
+		if (stat_config.initial_delay > 0)
+			pr_info(PERF_EVLIST__ENABLED_MSG);
+	}
 }
 
 static void disable_counters(void)
@@ -929,8 +939,8 @@ static struct option stat_options[] = {
 		     "aggregate counts per thread", AGGR_THREAD),
 	OPT_SET_UINT(0, "per-node", &stat_config.aggr_mode,
 		     "aggregate counts per numa node", AGGR_NODE),
-	OPT_UINTEGER('D', "delay", &stat_config.initial_delay,
-		     "ms to wait before starting measurement after program start"),
+	OPT_INTEGER('D', "delay", &stat_config.initial_delay,
+		    "ms to wait before starting measurement after program start (-1: start with events disabled"),
 	OPT_CALLBACK_NOOPT(0, "metric-only", &stat_config.metric_only, NULL,
 			"Only print computed metrics. No raw values", enable_metric_only),
 	OPT_BOOLEAN(0, "topdown", &topdown_run,
tools/perf/util/evlist.h +3 -0
index 84386850c290..874ecf068ac9 100644
@@ -366,6 +366,9 @@ enum evlist_ctl_cmd {
 	CTL_CMD_ACK = 'a'
 };
 
+#define PERF_EVLIST__ENABLED_MSG "Events enabled\n"
+#define PERF_EVLIST__DISABLED_MSG "Events disabled\n"
+
 int perf_evlist__initialize_ctlfd(struct evlist *evlist, int ctl_fd, int ctl_fd_ack);
 int perf_evlist__finalize_ctlfd(struct evlist *evlist);
 int perf_evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd);
tools/perf/util/stat.h +1 -1
index b4fdfaa7f2c0..027b9dcd902f 100644
@@ -113,7 +113,7 @@ struct perf_stat_config {
 	FILE			*output;
 	unsigned int		 interval;
 	unsigned int		 timeout;
-	unsigned int		 initial_delay;
+	int			 initial_delay;
 	unsigned int		 unit_width;
 	unsigned int		 metric_only_len;
 	int			 times;
Signature · 1 line
2.24.1
Signature · 1 line
- Arnaldo
#10 lore raw

Re: [PATCH v2 04/11] perf stat: extend -D,--delay option with -1 value

Quoted 6 lines · Arnaldo Carvalho de Melo

Em Wed, May 06, 2020 at 09:20:54PM +0300, Alexey Budankov escreveu:

Quoted 4 lines

Extend -D,--delay option with -1 value to start monitoring with events disabled to be enabled later by enable command provided via control file descriptor.

Quoted 7 lines
Quoted 5 lines
---
 tools/perf/builtin-stat.c | 18 ++++++++++++++----
 tools/perf/util/evlist.h  |  3 +++
 tools/perf/util/stat.h    |  2 +-

You forgot to update tools/perf/Documentation/perf-stat.h

Good catch. Addressed in v3. Thanks!

~Alexey

#11 lore raw

PATCH v2 5/11 perf stat: implement control commands handling

In reply to Alexey Budankov

Implement handling of 'enable' and 'disable' control commands coming from control file descriptor.

---
 tools/perf/builtin-stat.c | 48 +++++++++++++++++++++++++++++----------
 1 file changed, 36 insertions(+), 12 deletions(-)
tools/perf/builtin-stat.c +36 -12
index bda777ca0420..5aab3ff1bbea 100644
@@ -460,8 +460,9 @@ static int handle_events(pid_t pid, struct perf_stat_config *config)
 {
 	pid_t child = 0;
 	bool res, stop = false;
-	struct timespec time_to_sleep;
-	int sleep_time, status = 0, times = config->times;
+	int time_to_sleep, sleep_time, status = 0, times = config->times;
+	enum evlist_ctl_cmd cmd = CTL_CMD_UNSUPPORTED;
+	struct timespec time_start, time_stop, time_diff;
 
 	if (config->interval)
 		sleep_time = config->interval;
@@ -470,22 +471,45 @@ static int handle_events(pid_t pid, struct perf_stat_config *config)
 	else
 		sleep_time = 1000;
 
-	time_to_sleep.tv_sec  = sleep_time / MSEC_PER_SEC;
-	time_to_sleep.tv_nsec = (sleep_time % MSEC_PER_SEC) * NSEC_PER_MSEC;
+	time_to_sleep = sleep_time;
 
 	do {
 		if (pid != -1)
 			child = waitpid(pid, &status, WNOHANG);
 		if (child || stop || done)
 			break;
-		nanosleep(&time_to_sleep, NULL);
-		if (pid == -1)
-			stop = !is_target_alive(&target, evsel_list->core.threads);
-		if (config->timeout) {
-			stop = !stop ? true : stop;
-		} else {
-			res = print_interval_and_stop(config, &times);
-			stop = !stop ? res : stop;
+		clock_gettime(CLOCK_MONOTONIC, &time_start);
+		if (!(evlist__poll(evsel_list, time_to_sleep) > 0)) { /* poll timeout or EINTR */
+			if (pid == -1)
+				stop = !is_target_alive(&target, evsel_list->core.threads);
+			if (config->timeout) {
+				stop = !stop ? true : stop;
+			} else {
+				res = print_interval_and_stop(config, &times);
+				stop = !stop ? res : stop;
+			}
+			time_to_sleep = sleep_time;
+		} else { /* fd revent */
+			if (perf_evlist__ctlfd_process(evsel_list, &cmd) > 0) {
+				switch (cmd) {
+				case CTL_CMD_ENABLE:
+					pr_info(PERF_EVLIST__ENABLED_MSG);
+					stop = print_interval_and_stop(config, &times);
+					break;
+				case CTL_CMD_DISABLE:
+					stop = print_interval_and_stop(config, &times);
+					pr_info(PERF_EVLIST__DISABLED_MSG);
+					break;
+				case CTL_CMD_ACK:
+				case CTL_CMD_UNSUPPORTED:
+				default:
+					break;
+				}
+			}
+			clock_gettime(CLOCK_MONOTONIC, &time_stop);
+			diff_timespec(&time_diff, &time_stop, &time_start);
+			time_to_sleep -= time_diff.tv_sec * MSEC_PER_SEC +
+					 time_diff.tv_nsec / NSEC_PER_MSEC;
 		}
 	} while (1);
 
Signature · 1 line
2.24.1
#12 lore raw

PATCH v2 6/11 perf stat: introduce --ctl-fd[-ack] options

In reply to Alexey Budankov

Introduce --ctl-fd[-ack] options to pass open file descriptors numbers from command line.

---
 tools/perf/builtin-stat.c | 10 ++++++++++
 tools/perf/util/stat.h    |  2 ++
 2 files changed, 12 insertions(+)
tools/perf/builtin-stat.c +10 -0
index 5aab3ff1bbea..60c0d9521f74 100644
@@ -187,6 +187,8 @@ static struct perf_stat_config stat_config = {
 	.metric_only_len	= METRIC_ONLY_LEN,
 	.walltime_nsecs_stats	= &walltime_nsecs_stats,
 	.big_num		= true,
+	.ctl_fd			= -1,
+	.ctl_fd_ack		= -1
 };
 
 static inline void diff_timespec(struct timespec *r, struct timespec *a,
@@ -984,6 +986,10 @@ static struct option stat_options[] = {
 		    "Use with 'percore' event qualifier to show the event "
 		    "counts of one hardware thread by sum up total hardware "
 		    "threads of same physical core"),
+	OPT_INTEGER(0, "ctl-fd", &stat_config.ctl_fd,
+		    "Listen on fd descriptor for command to control measurement ('e': enable events, 'd': disable events)"),
+	OPT_INTEGER(0, "ctl-fd-ack", &stat_config.ctl_fd_ack,
+		    "Send control command completion ('a') to fd ack descriptor"),
 	OPT_END()
 };
 
@@ -2180,6 +2186,8 @@ int cmd_stat(int argc, const char **argv)
 	signal(SIGALRM, skip_signal);
 	signal(SIGABRT, skip_signal);
 
+	perf_evlist__initialize_ctlfd(evsel_list, stat_config.ctl_fd, stat_config.ctl_fd_ack);
+
 	status = 0;
 	for (run_idx = 0; forever || run_idx < stat_config.run_count; run_idx++) {
 		if (stat_config.run_count != 1 && verbose > 0)
@@ -2199,6 +2207,8 @@ int cmd_stat(int argc, const char **argv)
 	if (!forever && status != -1 && !interval)
 		print_counters(NULL, argc, argv);
 
+	perf_evlist__finalize_ctlfd(evsel_list);
+
 	if (STAT_RECORD) {
 		/*
 		 * We synthesize the kernel mmap record just so that older tools
tools/perf/util/stat.h +2 -0
index 027b9dcd902f..0b0fa3a2cde2 100644
@@ -130,6 +130,8 @@ struct perf_stat_config {
 	struct perf_cpu_map		*cpus_aggr_map;
 	u64			*walltime_run;
 	struct rblist		 metric_events;
+	int			 ctl_fd;
+	int			 ctl_fd_ack;
 };
 
 void update_stats(struct stats *stats, u64 val);
Signature · 1 line
2.24.1
#13 lore raw

PATCH v2 7/11 perf docs: extend stat mode docs with info on --ctl-fd[-ack] options

In reply to Alexey Budankov

Extend perf-stat.txt file with --ctl-fd[-ack] options description. Document possible usage model introduced by --ctl-fd[-ack] options by providing example bash shell script.

---
 tools/perf/Documentation/perf-stat.txt | 40 ++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
tools/perf/Documentation/perf-stat.txt +40 -0
index 3fb5028aef08..19ed53e08294 100644
@@ -164,6 +164,46 @@ with it.  --append may be used here.  Examples:
      3>results  perf stat --log-fd 3          -- $cmd
      3>>results perf stat --log-fd 3 --append -- $cmd
 
+--ctl-fd::
+--ctl-fd-ack::
+
+Listen on ctl-fd descriptor for command to control measurement ('e': enable events,
+'d': disable events). Optionally send control command completion ('a') to fd-ack
+descriptor to synchronize with the controlling process. Example of bash shell script
+to enable and disable events during measurements:
+
+#!/bin/bash
+
+ctl_dir=/tmp/
+
+ctl_fifo=${ctl_dir}perf_ctl.fifo
+test -p ${ctl_fifo} && unlink ${ctl_fifo}
+mkfifo ${ctl_fifo}
+exec {ctl_fd}<>${ctl_fifo}
+
+ctl_ack_fifo=${ctl_dir}perf_ctl_ack.fifo
+test -p ${ctl_ack_fifo} && unlink ${ctl_ack_fifo}
+mkfifo ${ctl_ack_fifo}
+exec {ctl_fd_ack}<>${ctl_ack_fifo}
+
+perf stat -D -1 -e cpu-cycles -a -I 1000                \
+          --ctl-fd ${ctl_fd} --ctl-fd-ack ${ctl_fd_ack} \
+          -- sleep 30 &
+perf_pid=$!
+
+sleep 5  && echo 'e' >&${ctl_fd} && read -u ${ctl_fd_ack} e1 && echo "enabled(${e1})"
+sleep 10 && echo 'd' >&${ctl_fd} && read -u ${ctl_fd_ack} d1 && echo "disabled(${d1})"
+
+exec {ctl_fd_ack}>&-
+unlink ${ctl_ack_fifo}
+
+exec {ctl_fd}>&-
+unlink ${ctl_fifo}
+
+wait -n ${perf_pid}
+exit $?
+
+
 --pre::
 --post::
 	Pre and post measurement hooks, e.g.:
Signature · 1 line
2.24.1
#14 lore raw

Re: [PATCH v2 07/11] perf docs: extend stat mode docs with info on --ctl-fd[-ack] options

Em Wed, May 06, 2020 at 09:22:55PM +0300, Alexey Budankov escreveu:

Quoted 4 lines

Extend perf-stat.txt file with --ctl-fd[-ack] options description. Document possible usage model introduced by --ctl-fd[-ack] options by providing example bash shell script.

Please update the docs in the same patch that introduces the options being documented.

- Arnaldo

Quoted 60 lines
---
 tools/perf/Documentation/perf-stat.txt | 40 ++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
tools/perf/Documentation/perf-stat.txt +40 -0
index 3fb5028aef08..19ed53e08294 100644
@@ -164,6 +164,46 @@ with it.  --append may be used here.  Examples:
      3>results  perf stat --log-fd 3          -- $cmd
      3>>results perf stat --log-fd 3 --append -- $cmd
 
+--ctl-fd::
+--ctl-fd-ack::
+
+Listen on ctl-fd descriptor for command to control measurement ('e': enable events,
+'d': disable events). Optionally send control command completion ('a') to fd-ack
+descriptor to synchronize with the controlling process. Example of bash shell script
+to enable and disable events during measurements:
+
+#!/bin/bash
+
+ctl_dir=/tmp/
+
+ctl_fifo=${ctl_dir}perf_ctl.fifo
+test -p ${ctl_fifo} && unlink ${ctl_fifo}
+mkfifo ${ctl_fifo}
+exec {ctl_fd}<>${ctl_fifo}
+
+ctl_ack_fifo=${ctl_dir}perf_ctl_ack.fifo
+test -p ${ctl_ack_fifo} && unlink ${ctl_ack_fifo}
+mkfifo ${ctl_ack_fifo}
+exec {ctl_fd_ack}<>${ctl_ack_fifo}
+
+perf stat -D -1 -e cpu-cycles -a -I 1000                \
+          --ctl-fd ${ctl_fd} --ctl-fd-ack ${ctl_fd_ack} \
+          -- sleep 30 &
+perf_pid=$!
+
+sleep 5  && echo 'e' >&${ctl_fd} && read -u ${ctl_fd_ack} e1 && echo "enabled(${e1})"
+sleep 10 && echo 'd' >&${ctl_fd} && read -u ${ctl_fd_ack} d1 && echo "disabled(${d1})"
+
+exec {ctl_fd_ack}>&-
+unlink ${ctl_ack_fifo}
+
+exec {ctl_fd}>&-
+unlink ${ctl_fifo}
+
+wait -n ${perf_pid}
+exit $?
+
+
 --pre::
 --post::
 	Pre and post measurement hooks, e.g.:
Signature · 1 line
2.24.1
Signature · 1 line
- Arnaldo
#15 lore raw

Re: [PATCH v2 07/11] perf docs: extend stat mode docs with info on --ctl-fd[-ack] options

Quoted 8 lines · Arnaldo Carvalho de Melo

Em Wed, May 06, 2020 at 09:22:55PM +0300, Alexey Budankov escreveu:

Quoted 4 lines

Extend perf-stat.txt file with --ctl-fd[-ack] options description. Document possible usage model introduced by --ctl-fd[-ack] options by providing example bash shell script.

Please update the docs in the same patch that introduces the options being documented.

Addressed in v3.

~Alexey

#16 lore raw

PATCH v2 8/11 perf record: extend -D,--delay option with -1 value

In reply to Alexey Budankov

Extend -D,--delay option with -1 to start collection with events disabled to be enbled later by enable command provided via control file descriptor.

---
 tools/perf/builtin-record.c | 12 ++++++++----
 tools/perf/builtin-trace.c  |  2 +-
 tools/perf/util/record.h    |  2 +-
 3 files changed, 10 insertions(+), 6 deletions(-)
tools/perf/builtin-record.c +8 -4
index e4efdbf1a81e..8a14e68b86ad 100644
@@ -1704,8 +1704,12 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 	}
 
 	if (opts->initial_delay) {
-		usleep(opts->initial_delay * USEC_PER_MSEC);
-		evlist__enable(rec->evlist);
+		pr_info(PERF_EVLIST__DISABLED_MSG);
+		if (opts->initial_delay > 0) {
+			usleep(opts->initial_delay * USEC_PER_MSEC);
+			evlist__enable(rec->evlist);
+			pr_info(PERF_EVLIST__ENABLED_MSG);
+		}
 	}
 
 	trigger_ready(&auxtrace_snapshot_trigger);
@@ -2413,8 +2417,8 @@ static struct option __record_options[] = {
 	OPT_CALLBACK('G', "cgroup", &record.evlist, "name",
 		     "monitor event in cgroup name only",
 		     parse_cgroups),
-	OPT_UINTEGER('D', "delay", &record.opts.initial_delay,
-		  "ms to wait before starting measurement after program start"),
+	OPT_INTEGER('D', "delay", &record.opts.initial_delay,
+		  "ms to wait before starting measurement after program start (-1: start with events disabled )"),
 	OPT_BOOLEAN(0, "kcore", &record.opts.kcore, "copy /proc/kcore"),
 	OPT_STRING('u', "uid", &record.opts.target.uid_str, "user",
 		   "user to profile"),
tools/perf/builtin-trace.c +1 -1
index a46efb907bd4..63f69a927f3c 100644
@@ -4773,7 +4773,7 @@ int cmd_trace(int argc, const char **argv)
 			"per thread proc mmap processing timeout in ms"),
 	OPT_CALLBACK('G', "cgroup", &trace, "name", "monitor event in cgroup name only",
 		     trace__parse_cgroups),
-	OPT_UINTEGER('D', "delay", &trace.opts.initial_delay,
+	OPT_INTEGER('D', "delay", &trace.opts.initial_delay,
 		     "ms to wait before starting measurement after program "
 		     "start"),
 	OPTS_EVSWITCH(&trace.evswitch),
tools/perf/util/record.h +1 -1
index 923565c3b155..96a73bbd8cd4 100644
@@ -60,7 +60,7 @@ struct record_opts {
 	const char    *auxtrace_snapshot_opts;
 	const char    *auxtrace_sample_opts;
 	bool	      sample_transaction;
-	unsigned      initial_delay;
+	int	      initial_delay;
 	bool	      use_clockid;
 	clockid_t     clockid;
 	u64	      clockid_res_ns;
Signature · 1 line
2.24.1
#17 lore raw

PATCH v2 9/11 perf record: implement control commands handling

In reply to Alexey Budankov

Implement handling of 'enable' and 'disable' control commands coming from control file descriptor.

---
 tools/perf/builtin-record.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
tools/perf/builtin-record.c +17 -1
index 8a14e68b86ad..2278a3efc747 100644
@@ -1496,6 +1496,7 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 	bool disabled = false, draining = false;
 	int fd;
 	float ratio = 0;
+	enum evlist_ctl_cmd cmd = CTL_CMD_UNSUPPORTED;
 
 	atexit(record__sig_exit);
 	signal(SIGCHLD, sig_handler);
@@ -1793,8 +1794,23 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 			 * Propagate error, only if there's any. Ignore positive
 			 * number of returned events and interrupt error.
 			 */
-			if (err > 0 || (err < 0 && errno == EINTR))
+			if (err > 0 || (err < 0 && errno == EINTR)) {
 				err = 0;
+				if (perf_evlist__ctlfd_process(rec->evlist, &cmd) > 0) {
+					switch (cmd) {
+					case CTL_CMD_ENABLE:
+						pr_info(PERF_EVLIST__ENABLED_MSG);
+						break;
+					case CTL_CMD_DISABLE:
+						pr_info(PERF_EVLIST__DISABLED_MSG);
+						break;
+					case CTL_CMD_ACK:
+					case CTL_CMD_UNSUPPORTED:
+					default:
+						break;
+					}
+				}
+			}
 			waking++;
 
 			if (evlist__filter_pollfd(rec->evlist, POLLERR | POLLHUP) == 0)
Signature · 1 line
2.24.1
#18 lore raw

Re: [PATCH v2 09/11] perf record: implement control commands handling

Em Wed, May 06, 2020 at 09:29:05PM +0300, Alexey Budankov escreveu:

Quoted 28 lines

Implement handling of 'enable' and 'disable' control commands coming from control file descriptor.

---
 tools/perf/builtin-record.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
tools/perf/builtin-record.c +2 -1
index 8a14e68b86ad..2278a3efc747 100644
@@ -1496,6 +1496,7 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 	bool disabled = false, draining = false;
 	int fd;
 	float ratio = 0;
+	enum evlist_ctl_cmd cmd = CTL_CMD_UNSUPPORTED;
 
 	atexit(record__sig_exit);
 	signal(SIGCHLD, sig_handler);
@@ -1793,8 +1794,23 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 			 * Propagate error, only if there's any. Ignore positive
 			 * number of returned events and interrupt error.
 			 */
-			if (err > 0 || (err < 0 && errno == EINTR))
+			if (err > 0 || (err < 0 && errno == EINTR)) {
 				err = 0;

tools/perf/builtin-record.c static int __cmd_record(struct record *rec, int argc, const char **argv) · line 1808

Quoted 10 lines
tools/perf/builtin-record.c +10 -0
+				if (perf_evlist__ctlfd_process(rec->evlist, &cmd) > 0) {
+					switch (cmd) {
+					case CTL_CMD_ENABLE:
+						pr_info(PERF_EVLIST__ENABLED_MSG);
+						break;
+					case CTL_CMD_DISABLE:
+						pr_info(PERF_EVLIST__DISABLED_MSG);
+						break;
+					case CTL_CMD_ACK:
+					case CTL_CMD_UNSUPPORTED:

Shouldn't we have a pr_debug() or even pr_err() for the unsupported one?

Quoted 12 lines
tools/perf/builtin-record.c +5 -0
+					default:
+						break;
+					}
+				}
+			}
 			waking++;
 
 			if (evlist__filter_pollfd(rec->evlist, POLLERR | POLLHUP) == 0)
Signature · 1 line
2.24.1
Signature · 1 line
- Arnaldo
#19 lore raw

Re: [PATCH v2 09/11] perf record: implement control commands handling

Quoted 33 lines · Arnaldo Carvalho de Melo

Em Wed, May 06, 2020 at 09:29:05PM +0300, Alexey Budankov escreveu:

Quoted 32 lines

Implement handling of 'enable' and 'disable' control commands coming from control file descriptor.

---
 tools/perf/builtin-record.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
tools/perf/builtin-record.c +6 -1
index 8a14e68b86ad..2278a3efc747 100644
@@ -1496,6 +1496,7 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 	bool disabled = false, draining = false;
 	int fd;
 	float ratio = 0;
+	enum evlist_ctl_cmd cmd = CTL_CMD_UNSUPPORTED;
 
 	atexit(record__sig_exit);
 	signal(SIGCHLD, sig_handler);
@@ -1793,8 +1794,23 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 			 * Propagate error, only if there's any. Ignore positive
 			 * number of returned events and interrupt error.
 			 */
-			if (err > 0 || (err < 0 && errno == EINTR))
+			if (err > 0 || (err < 0 && errno == EINTR)) {
 				err = 0;
+				if (perf_evlist__ctlfd_process(rec->evlist, &cmd) > 0) {
+					switch (cmd) {
+					case CTL_CMD_ENABLE:
+						pr_info(PERF_EVLIST__ENABLED_MSG);
Quoted 8 lines

tools/perf/builtin-record.c static int __cmd_record(struct record *rec, int argc, const char **argv) · line 1808

Quoted 6 lines
tools/perf/builtin-record.c +6 -0
+						break;
+					case CTL_CMD_DISABLE:
+						pr_info(PERF_EVLIST__DISABLED_MSG);
+						break;
+					case CTL_CMD_ACK:
+					case CTL_CMD_UNSUPPORTED:

Shouldn't we have a pr_debug() or even pr_err() for the unsupported one?

It already exists on lower level, at perf_evlist__ctlfd_process() (see patch 02/11).

~Alexey

#20 lore raw

Re: [PATCH v2 09/11] perf record: implement control commands handling

Em Thu, May 07, 2020 at 11:58:45AM +0300, Alexey Budankov escreveu:

Quoted 44 lines · Arnaldo Carvalho de Melo
Quoted 33 lines

Em Wed, May 06, 2020 at 09:29:05PM +0300, Alexey Budankov escreveu:

Quoted 32 lines

Implement handling of 'enable' and 'disable' control commands coming from control file descriptor.

---
 tools/perf/builtin-record.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
tools/perf/builtin-record.c +6 -1
index 8a14e68b86ad..2278a3efc747 100644
@@ -1496,6 +1496,7 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 	bool disabled = false, draining = false;
 	int fd;
 	float ratio = 0;
+	enum evlist_ctl_cmd cmd = CTL_CMD_UNSUPPORTED;
 
 	atexit(record__sig_exit);
 	signal(SIGCHLD, sig_handler);
@@ -1793,8 +1794,23 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 			 * Propagate error, only if there's any. Ignore positive
 			 * number of returned events and interrupt error.
 			 */
-			if (err > 0 || (err < 0 && errno == EINTR))
+			if (err > 0 || (err < 0 && errno == EINTR)) {
 				err = 0;
+				if (perf_evlist__ctlfd_process(rec->evlist, &cmd) > 0) {
+					switch (cmd) {
+					case CTL_CMD_ENABLE:
+						pr_info(PERF_EVLIST__ENABLED_MSG);
Quoted 8 lines

tools/perf/builtin-record.c static int __cmd_record(struct record *rec, int argc, const char **argv) · line 1808

Quoted 6 lines
tools/perf/builtin-record.c +6 -0
+						break;
+					case CTL_CMD_DISABLE:
+						pr_info(PERF_EVLIST__DISABLED_MSG);
+						break;
+					case CTL_CMD_ACK:
+					case CTL_CMD_UNSUPPORTED:

Shouldn't we have a pr_debug() or even pr_err() for the unsupported one?

Quoted 1 line

It already exists on lower level, at perf_evlist__ctlfd_process() (see patch 02/11).

oic

Quoted 1 line

~Alexey

Signature · 1 line
- Arnaldo
#21 lore raw

PATCH v2 10/11 perf record: introduce --ctl-fd[-ack] options

In reply to Alexey Budankov

Introduce --ctl-fd[-ack] options to pass open file descriptors numbers from command line.

---
 tools/perf/builtin-record.c | 9 +++++++++
 tools/perf/util/record.h    | 2 ++
 2 files changed, 11 insertions(+)
tools/perf/builtin-record.c +9 -0
index 2278a3efc747..9cf738ff1cae 100644
@@ -1704,6 +1704,8 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 		perf_evlist__start_workload(rec->evlist);
 	}
 
+	perf_evlist__initialize_ctlfd(rec->evlist, opts->ctl_fd, opts->ctl_fd_ack);
+
 	if (opts->initial_delay) {
 		pr_info(PERF_EVLIST__DISABLED_MSG);
 		if (opts->initial_delay > 0) {
@@ -1850,6 +1852,7 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 		record__synthesize_workload(rec, true);
 
 out_child:
+	perf_evlist__finalize_ctlfd(rec->evlist);
 	record__mmap_read_all(rec, true);
 	record__aio_mmap_read_sync(rec);
 
@@ -2331,6 +2334,8 @@ static struct record record = {
 		},
 		.mmap_flush          = MMAP_FLUSH_DEFAULT,
 		.nr_threads_synthesize = 1,
+		.ctl_fd              = -1,
+		.ctl_fd_ack          = -1,
 	},
 	.tool = {
 		.sample		= process_sample_event,
@@ -2526,6 +2531,10 @@ static struct option __record_options[] = {
 	OPT_UINTEGER(0, "num-thread-synthesize",
 		     &record.opts.nr_threads_synthesize,
 		     "number of threads to run for event synthesis"),
+	OPT_INTEGER(0, "ctl-fd", &record.opts.ctl_fd,
+		    "Listen on fd descriptor for command to control measurement ('e': enable events, 'd': disable events)"),
+	OPT_INTEGER(0, "ctl-fd-ack", &record.opts.ctl_fd_ack,
+		    "Send control command completion ('a') to fd ack descriptor"),
 	OPT_END()
 };
 
tools/perf/util/record.h +2 -0
index 96a73bbd8cd4..da18aeca3623 100644
@@ -69,6 +69,8 @@ struct record_opts {
 	int	      mmap_flush;
 	unsigned int  comp_level;
 	unsigned int  nr_threads_synthesize;
+	int	      ctl_fd;
+	int	      ctl_fd_ack;
 };
 
 extern const char * const *record_usage;
Signature · 1 line
2.24.1
#22 lore raw

PATCH v2 11/11 perf docs: extend record mode docs with info on --ctl-fd[-ack] options

In reply to Alexey Budankov

Extend perf-record.txt file with --ctl-fd[-ack] options description. Document possible usage model introduced by --ctl-fd[-ack] options by providing example bash shell script.

---
 tools/perf/Documentation/perf-record.txt | 39 ++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
tools/perf/Documentation/perf-record.txt +39 -0
index 561ef55743e2..eabb00ed2f5d 100644
@@ -613,6 +613,45 @@ appended unit character - B/K/M/G
 	The number of threads to run when synthesizing events for existing processes.
 	By default, the number of threads equals 1.
 
+--ctl-fd::
+--ctl-fd-ack::
+Listen on ctl-fd descriptor for command to control measurement ('e': enable events,
+'d': disable events. Optionally send control command completion ('a') to fd-ack
+descriptor to synchronize with the controlling process. Example of bash shell script
+to enable and disable events during measurements:
+
+#!/bin/bash
+
+ctl_dir=/tmp/
+
+ctl_fifo=${ctl_dir}perf_ctl.fifo
+test -p ${ctl_fifo} && unlink ${ctl_fifo}
+mkfifo ${ctl_fifo}
+exec {ctl_fd}<>${ctl_fifo}
+
+ctl_ack_fifo=${ctl_dir}perf_ctl_ack.fifo
+test -p ${ctl_ack_fifo} && unlink ${ctl_ack_fifo}
+mkfifo ${ctl_ack_fifo}
+exec {ctl_fd_ack}<>${ctl_ack_fifo}
+
+perf record -D -1 -e cpu-cycles -a                        \
+            --ctl-fd ${ctl_fd} --ctl-fd-ack ${ctl_fd_ack} \
+            -- sleep 30 &
+perf_pid=$!
+
+sleep 5  && echo 'e' >&${ctl_fd} && read -u ${ctl_fd_ack} e1 && echo "resumed(${e1})"
+sleep 10 && echo 'd' >&${ctl_fd} && read -u ${ctl_fd_ack} d1 && echo "paused(${d1})"
+
+exec {ctl_fd_ack}>&-
+unlink ${ctl_ack_fifo}
+
+exec {ctl_fd}>&-
+unlink ${ctl_fifo}
+
+wait -n ${perf_pid}
+exit $?
+
+
 SEE ALSO
 --------
 linkperf:perf-stat[1], linkperf:perf-list[1], linkperf:perf-intel-pt[1]
Signature · 1 line
2.24.1
#23 lore raw

Re: [PATCH v2 11/11] perf docs: extend record mode docs with info on --ctl-fd[-ack] options

Em Wed, May 06, 2020 at 09:30:50PM +0300, Alexey Budankov escreveu:

Quoted 4 lines

Extend perf-record.txt file with --ctl-fd[-ack] options description. Document possible usage model introduced by --ctl-fd[-ack] options by providing example bash shell script.

Ditto, combine this patch with the one that introduces these options.

Quoted 59 lines
---
 tools/perf/Documentation/perf-record.txt | 39 ++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
tools/perf/Documentation/perf-record.txt +39 -0
index 561ef55743e2..eabb00ed2f5d 100644
@@ -613,6 +613,45 @@ appended unit character - B/K/M/G
 	The number of threads to run when synthesizing events for existing processes.
 	By default, the number of threads equals 1.
 
+--ctl-fd::
+--ctl-fd-ack::
+Listen on ctl-fd descriptor for command to control measurement ('e': enable events,
+'d': disable events. Optionally send control command completion ('a') to fd-ack
+descriptor to synchronize with the controlling process. Example of bash shell script
+to enable and disable events during measurements:
+
+#!/bin/bash
+
+ctl_dir=/tmp/
+
+ctl_fifo=${ctl_dir}perf_ctl.fifo
+test -p ${ctl_fifo} && unlink ${ctl_fifo}
+mkfifo ${ctl_fifo}
+exec {ctl_fd}<>${ctl_fifo}
+
+ctl_ack_fifo=${ctl_dir}perf_ctl_ack.fifo
+test -p ${ctl_ack_fifo} && unlink ${ctl_ack_fifo}
+mkfifo ${ctl_ack_fifo}
+exec {ctl_fd_ack}<>${ctl_ack_fifo}
+
+perf record -D -1 -e cpu-cycles -a                        \
+            --ctl-fd ${ctl_fd} --ctl-fd-ack ${ctl_fd_ack} \
+            -- sleep 30 &
+perf_pid=$!
+
+sleep 5  && echo 'e' >&${ctl_fd} && read -u ${ctl_fd_ack} e1 && echo "resumed(${e1})"
+sleep 10 && echo 'd' >&${ctl_fd} && read -u ${ctl_fd_ack} d1 && echo "paused(${d1})"
+
+exec {ctl_fd_ack}>&-
+unlink ${ctl_ack_fifo}
+
+exec {ctl_fd}>&-
+unlink ${ctl_fifo}
+
+wait -n ${perf_pid}
+exit $?
+
+
 SEE ALSO
 --------
 linkperf:perf-stat[1], linkperf:perf-list[1], linkperf:perf-intel-pt[1]
Signature · 1 line
2.24.1
Signature · 1 line
- Arnaldo
#24 lore raw

Re: [PATCH v2 11/11] perf docs: extend record mode docs with info on --ctl-fd[-ack] options

Quoted 7 lines · Arnaldo Carvalho de Melo

Em Wed, May 06, 2020 at 09:30:50PM +0300, Alexey Budankov escreveu:

Quoted 4 lines

Extend perf-record.txt file with --ctl-fd[-ack] options description. Document possible usage model introduced by --ctl-fd[-ack] options by providing example bash shell script.

Ditto, combine this patch with the one that introduces these options.

Addressed in v3.

~Alexey