Skip to contentSkip to conversation

Not able to read USB speed and descriptor

DISCUSSION Prabhu Chawandi 3 participants 4 messages Jun 23, 2009 – Jun 24, 2009

lore
Share & tools
lore
#0 lore raw

Hi all,

I ma not able to read the USB descriptor and speeed, while I can
read and write into the storage device..

What might be the reason for that ?

regards,
Prabhu

#1 lore raw
Quoted 6 lines · Prabhu Chawandi

Hi all,

  I ma not able to read the USB descriptor and speeed, while I can read and write into the storage device..

What might be the reason for that ?

Where is the code ?

Quoted 8 lines

regards,
Prabhu
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

#2 lore raw
In reply to Prabhu Chawandi

In the devio.c,

I have added a case to return the speed and other descriptors,

call :
ret = usb_control_msg(pRootHub, usb_sndctrlpipe(pRootHub, 0),
USB_REQ_CLEAR_FEATURE, USB_RT_PORT, USB_PORT_FEAT_POWER, port_num + 1, NULL, 0, HZ);

The above call is returning err : -32 EPIPE.

The above call is working file for the rear port while the same is not working for the fromt port.

Anythig am I missing ? I am testing it for mass stoage device...

Any inputs ? ,,,,,

Quoted 10 lines · Prabhu Chawandi

Hi all,

  I ma not able to read the USB descriptor and speeed, while I can read and write into the storage device..

What might be the reason for that ?

regards,
Prabhu

#3 lore raw
Quoted 9 lines · Prabhu Chawandi

In the devio.c,

I have added a case to return the speed and other descriptors,

call :
ret = usb_control_msg(pRootHub, usb_sndctrlpipe(pRootHub, 0),
USB_REQ_CLEAR_FEATURE, USB_RT_PORT, USB_PORT_FEAT_POWER, port_num + 1, NULL, 0, HZ);

Quoted 4 lines

The above call is returning err : -32 EPIPE.

The above call is working file for the rear port while the same is not working for the fromt port.

Is this question related to $SUBJECT? I don't see any connection...

Quoted 1 line

Anythig am I missing ? I am testing it for mass stoage device...

In most host controllers for personal computers, the hardware does not support turning off port power.

Alan Stern