Skip to contentSkip to conversation

riscv: support for svpbmt and D1 memory types

PATCH Superseded Heiko Stuebner 5 participants 21 messages Jan 21, 2022 – Feb 7, 2022

Subsystems (3)

v5 of 10 Superseded Latest is v10 →

lore
Share & tools
lore
#0 lore raw

v5 cover riscv: support for svpbmt and D1 memory types

So this is my try at implementing svpbmt (and the diverging D1 memory types using the alternatives framework).

This includes a number of changes to the alternatives mechanism itself. The biggest one being the move to a more central location, as I expect in the future, nearly every chip needing some sort of patching, be it either for erratas or for optional features (svpbmt or others).

The dt-binding for svpbmt itself is of course not finished and is still using the binding introduced in previous versions, as where to put a svpbmt-property in the devicetree is still under dicussion. Atish seems to be working on a framework for extensions [0],

The series also introduces support for the memory types of the D1 which are implemented differently to svpbmt. But when patching anyway it's pretty clean to add the D1 variant via ALTERNATIVE_2 to the same location.

The only slightly bigger difference is that the "normal" type is not 0 as with svpbmt, so kernel patches for this PMA type need to be applied even before the MMU is brought up, so the series introduces a separate stage for that.

In theory this series is 3 parts:
- sbi cache-flush / null-ptr
- alternatives improvements
- svpbmt+d1

So expecially patches from the first 2 areas could be applied when deemed ready, I just thought to keep it together to show-case where the end-goal is and not requiring jumping between different series.

The sbi cache-flush patch is based on Atish's sparse-hartid patch [1], as it touches a similar area in mm/cacheflush.c

I picked the recipient list from the previous version, hopefully I didn't forget anybody.

[0] https://lore.kernel.org/r/[email protected]
[1] https://lore.kernel.org/r/[email protected]

Heiko Stuebner (12):
riscv: only use IPIs to handle cache-flushes on remote cpus
riscv: integrate alternatives better into the main architecture
riscv: allow different stages with alternatives
riscv: implement module alternatives
riscv: implement ALTERNATIVE_2 macro
riscv: extend concatenated alternatives-lines to the same length
riscv: prevent compressed instructions in alternatives
riscv: move boot alternatives to a slightly earlier position
riscv: Fix accessing pfn bits in PTEs for non-32bit variants
riscv: add cpufeature handling via alternatives
riscv: remove FIXMAP_PAGE_IO and fall back to its default value
riscv: add memory-type errata for T-Head

Wei Fu (2):
dt-bindings: riscv: add MMU Standard Extensions support for Svpbmt
riscv: add RISC-V Svpbmt extension supports

 .../devicetree/bindings/riscv/cpus.yaml       |  10 ++
 arch/riscv/Kconfig.erratas                    |  29 ++--
 arch/riscv/Kconfig.socs                       |   1 -
 arch/riscv/Makefile                           |   2 +-
 arch/riscv/errata/Makefile                    |   2 +-
 arch/riscv/errata/sifive/errata.c             |  10 +-
 arch/riscv/errata/thead/Makefile              |   1 +
 arch/riscv/errata/thead/errata.c              |  85 +++++++++++
 arch/riscv/include/asm/alternative-macros.h   | 114 ++++++++-------
 arch/riscv/include/asm/alternative.h          |  16 ++-
 arch/riscv/include/asm/errata_list.h          |  52 +++++++
 arch/riscv/include/asm/fixmap.h               |   2 -
 arch/riscv/include/asm/pgtable-32.h           |  17 +++
 arch/riscv/include/asm/pgtable-64.h           |  79 +++++++++-
 arch/riscv/include/asm/pgtable-bits.h         |  10 --
 arch/riscv/include/asm/pgtable.h              |  53 +++++--
 arch/riscv/include/asm/vendorid_list.h        |   1 +
 arch/riscv/kernel/Makefile                    |   1 +
 arch/riscv/{errata => kernel}/alternative.c   |  47 +++++-
 arch/riscv/kernel/cpufeature.c                | 136 +++++++++++++++++-
 arch/riscv/kernel/head.S                      |   2 +
 arch/riscv/kernel/module.c                    |  29 ++++
 arch/riscv/kernel/smpboot.c                   |   4 -
 arch/riscv/kernel/traps.c                     |   2 +-
 arch/riscv/mm/cacheflush.c                    |   8 +-
 arch/riscv/mm/init.c                          |   2 +
 26 files changed, 599 insertions(+), 116 deletions(-)
 create mode 100644 arch/riscv/errata/thead/Makefile
 create mode 100644 arch/riscv/errata/thead/errata.c
 rename arch/riscv/{errata => kernel}/alternative.c (60%)
Signature · 1 line
2.30.2
#1 lore raw

PATCH v5 1/14 riscv: only use IPIs to handle cache-flushes on remote cpus

Right now, the flush_icache functions always use the SBI remote-fence when SBI is available, leaving using IPIs as a fallback mechanism.

IPIs on the other hand are more flexible, as the ipi_ops are initially set to go through SBI but later will be overwritten to go through the ACLINT/CLINT.

In a discussion we had, Nick was of the opinion that "In general we should prefer doing IPIs on S-mode through CLINT instead of going through SBI/M-mode, so IMHO we should only be using on_each_cpu_mask(ipi_remote_fence_i) on flush_icache_all()/ flush_icache_mm() and remove any explicit calls to sbi_remote_fence_i(), because this way we continue using SBI for doing remote fences even after CLINT/ACLINT driver is registered, instead of using direct IPIs through CLINT/ACLINT."

So follow this suggestion and just do ipi calls to have the proper kernel parts do them,

This also fixes the null-ptr dereference happening when flush_icache_all() is called before sbi_init().

---
 arch/riscv/mm/cacheflush.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)
arch/riscv/mm/cacheflush.c +1 -7
index 6cb7d96ad9c7..c35375cd52ec 100644
@@ -17,11 +17,7 @@ static void ipi_remote_fence_i(void *info)
 void flush_icache_all(void)
 {
 	local_flush_icache_all();
-
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
-		sbi_remote_fence_i(NULL);
-	else
-		on_each_cpu(ipi_remote_fence_i, NULL, 1);
+	on_each_cpu(ipi_remote_fence_i, NULL, 1);
 }
 EXPORT_SYMBOL(flush_icache_all);
 
@@ -66,8 +62,6 @@ void flush_icache_mm(struct mm_struct *mm, bool local)
 		 * with flush_icache_deferred().
 		 */
 		smp_mb();
-	} else if (IS_ENABLED(CONFIG_RISCV_SBI)) {
-		sbi_remote_fence_i(&others);
 	} else {
 		on_each_cpu_mask(&others, ipi_remote_fence_i, NULL, 1);
 	}
Signature · 1 line
2.30.2
#2 lore raw

Re: [PATCH v5 01/14] riscv: only use IPIs to handle cache-flushes on remote cpus

Quoted 11 lines · Heiko Stuebner

Right now, the flush_icache functions always use the SBI remote-fence when SBI is available, leaving using IPIs as a fallback mechanism.

IPIs on the other hand are more flexible, as the ipi_ops are initially set to go through SBI but later will be overwritten to go through the ACLINT/CLINT.

In a discussion we had, Nick was of the opinion that "In general we should prefer doing IPIs on S-mode through CLINT instead of going through SBI/M-mode,

Yes. Once Anup's ACLINT drivers are merged, that should be the preferred approach.

https://github.com/avpatel/linux/commit/416c667fd77d6f1fc310cbf727ec127aaf96cae2

Quoted 3 lines

so IMHO we should only be using on_each_cpu_mask(ipi_remote_fence_i) on flush_icache_all()/ flush_icache_mm() and remove any explicit calls to sbi_remote_fence_i(),

That's a bit confusing because we will be using SBI calls for all other fences while using IPIs for fence.i

Quoted 10 lines

because this way we continue using SBI for doing remote fences even after CLINT/ACLINT driver is registered, instead of using direct IPIs through CLINT/ACLINT."

So follow this suggestion and just do ipi calls to have the proper kernel parts do them,

This also fixes the null-ptr dereference happening when flush_icache_all() is called before sbi_init().

IMHO, this series should only fix the null-ptr dereference issue. The IPI based fence (for all) should only be disabled along with the ACLINT driver
that actually enables S-mode IPIs.

Quoted 40 lines
---
 arch/riscv/mm/cacheflush.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)
arch/riscv/mm/cacheflush.c +1 -8
index 6cb7d96ad9c7..c35375cd52ec 100644
@@ -17,11 +17,7 @@ static void ipi_remote_fence_i(void *info)
 void flush_icache_all(void)
 {
        local_flush_icache_all();
-
-       if (IS_ENABLED(CONFIG_RISCV_SBI))
-               sbi_remote_fence_i(NULL);
-       else
-               on_each_cpu(ipi_remote_fence_i, NULL, 1);
+       on_each_cpu(ipi_remote_fence_i, NULL, 1);
 }
 EXPORT_SYMBOL(flush_icache_all);
 
@@ -66,8 +62,6 @@ void flush_icache_mm(struct mm_struct *mm, bool local)
                 * with flush_icache_deferred().
                 */
                smp_mb();
-       } else if (IS_ENABLED(CONFIG_RISCV_SBI)) {
-               sbi_remote_fence_i(&others);
        } else {
                on_each_cpu_mask(&others, ipi_remote_fence_i, NULL, 1);
        }
--

2.30.2

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

Signature · 2 lines
Regards,
Atish
#3 lore raw

Re: [PATCH v5 01/14] riscv: only use IPIs to handle cache-flushes on remote cpus

Hi Atish,

Am Samstag, 22. Januar 2022, 04:45:52 CET schrieb Atish Patra:

Quoted 32 lines · Heiko Stuebner
Quoted 11 lines

Right now, the flush_icache functions always use the SBI remote-fence when SBI is available, leaving using IPIs as a fallback mechanism.

IPIs on the other hand are more flexible, as the ipi_ops are initially set to go through SBI but later will be overwritten to go through the ACLINT/CLINT.

In a discussion we had, Nick was of the opinion that "In general we should prefer doing IPIs on S-mode through CLINT instead of going through SBI/M-mode,

Yes. Once Anup's ACLINT drivers are merged, that should be the preferred approach.

https://github.com/avpatel/linux/commit/416c667fd77d6f1fc310cbf727ec127aaf96cae2

Quoted 3 lines

so IMHO we should only be using on_each_cpu_mask(ipi_remote_fence_i) on flush_icache_all()/ flush_icache_mm() and remove any explicit calls to sbi_remote_fence_i(),

That's a bit confusing because we will be using SBI calls for all other fences while using IPIs for fence.i

Quoted 7 lines

because this way we continue using SBI for doing remote fences even after CLINT/ACLINT driver is registered, instead of using direct IPIs through CLINT/ACLINT."

So follow this suggestion and just do ipi calls to have the proper kernel parts do them,

Quoted 8 lines
Quoted 3 lines

This also fixes the null-ptr dereference happening when flush_icache_all() is called before sbi_init().

IMHO, this series should only fix the null-ptr dereference issue. The IPI based fence (for all) should only be disabled along with the ACLINT driver
that actually enables S-mode IPIs.

ok, I'll roll this back to simply fixing the null-ptr issue.

Meanwhile I even found a nicer solution without actually touching the cachflush code.

Without sbi_init() we can assume that we're still before smp bringup, so the local_flush_icache_all() in flush_icache_all() will do the trick just fine and sbi_remote_fence_i() simply just needs to be an empty function until sbi is initialized.

Heiko

Quoted 45 lines
Quoted 41 lines
---
 arch/riscv/mm/cacheflush.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)
arch/riscv/mm/cacheflush.c +1 -8
index 6cb7d96ad9c7..c35375cd52ec 100644
@@ -17,11 +17,7 @@ static void ipi_remote_fence_i(void *info)
 void flush_icache_all(void)
 {
        local_flush_icache_all();
-
-       if (IS_ENABLED(CONFIG_RISCV_SBI))
-               sbi_remote_fence_i(NULL);
-       else
-               on_each_cpu(ipi_remote_fence_i, NULL, 1);
+       on_each_cpu(ipi_remote_fence_i, NULL, 1);
 }
 EXPORT_SYMBOL(flush_icache_all);
 
@@ -66,8 +62,6 @@ void flush_icache_mm(struct mm_struct *mm, bool local)
                 * with flush_icache_deferred().
                 */
                smp_mb();
-       } else if (IS_ENABLED(CONFIG_RISCV_SBI)) {
-               sbi_remote_fence_i(&others);
        } else {
                on_each_cpu_mask(&others, ipi_remote_fence_i, NULL, 1);
        }
--

2.30.2

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

#4 lore raw

Re: [PATCH v5 01/14] riscv: only use IPIs to handle cache-flushes on remote cpus

In reply to Heiko Stuebner
Quoted 17 lines · Heiko Stuebner

Right now, the flush_icache functions always use the SBI remote-fence when SBI is available, leaving using IPIs as a fallback mechanism.

IPIs on the other hand are more flexible, as the ipi_ops are initially set to go through SBI but later will be overwritten to go through the ACLINT/CLINT.

In a discussion we had, Nick was of the opinion that "In general we should prefer doing IPIs on S-mode through CLINT instead of going through SBI/M-mode, so IMHO we should only be using on_each_cpu_mask(ipi_remote_fence_i) on flush_icache_all()/ flush_icache_mm() and remove any explicit calls to sbi_remote_fence_i(), because this way we continue using SBI for doing remote fences even after CLINT/ACLINT driver is registered, instead of using direct IPIs through CLINT/ACLINT."

Quoted 8 lines

So follow this suggestion and just do ipi calls to have the proper kernel parts do them,

This also fixes the null-ptr dereference happening when flush_icache_all() is called before sbi_init().

For Guest/VM, only virtual IMSIC provides faster IPIs so in absence of virtual IMSIC, the SBI IPI based IPIs are the best approach.

Like Atish mentioned, please base this work on the ACLINT series because the ACLINT series adds required IPI infrastructure which helps us select SBI IPI versus direct S-mode IPI based on hardware capability.

Regards,
Anup

Quoted 33 lines
---
 arch/riscv/mm/cacheflush.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)
arch/riscv/mm/cacheflush.c +1 -8
index 6cb7d96ad9c7..c35375cd52ec 100644
@@ -17,11 +17,7 @@ static void ipi_remote_fence_i(void *info)
 void flush_icache_all(void)
 {
        local_flush_icache_all();
-
-       if (IS_ENABLED(CONFIG_RISCV_SBI))
-               sbi_remote_fence_i(NULL);
-       else
-               on_each_cpu(ipi_remote_fence_i, NULL, 1);
+       on_each_cpu(ipi_remote_fence_i, NULL, 1);
 }
 EXPORT_SYMBOL(flush_icache_all);
 
@@ -66,8 +62,6 @@ void flush_icache_mm(struct mm_struct *mm, bool local)
                 * with flush_icache_deferred().
                 */
                smp_mb();
-       } else if (IS_ENABLED(CONFIG_RISCV_SBI)) {
-               sbi_remote_fence_i(&others);
        } else {
                on_each_cpu_mask(&others, ipi_remote_fence_i, NULL, 1);
        }
--

2.30.2

#5 lore raw

PATCH v5 2/14 riscv: integrate alternatives better into the main architecture

In reply to Heiko Stuebner

Right now the alternatives need to be explicitly enabled and erratas are limited to SiFive ones.

Over time with more SoCs and additional RiscV extensions, many more erratas or other patch-worthy features will emerge, so it doesn't really make sense to have the core alternatives able to get deactivated.

So make it part of the core RiscV kernel and drop the main RISCV_ERRATA_ALTERNATIVES config symbol.

This also mimics how arm64 handles its alternatives implementation.

---
 arch/riscv/Kconfig.erratas                  | 10 ----------
 arch/riscv/Kconfig.socs                     |  1 -
 arch/riscv/Makefile                         |  2 +-
 arch/riscv/errata/Makefile                  |  1 -
 arch/riscv/include/asm/alternative-macros.h | 22 ---------------------
 arch/riscv/kernel/Makefile                  |  1 +
 arch/riscv/{errata => kernel}/alternative.c |  0
 arch/riscv/kernel/smpboot.c                 |  2 --
 arch/riscv/kernel/traps.c                   |  2 +-
 9 files changed, 3 insertions(+), 38 deletions(-)
 rename arch/riscv/{errata => kernel}/alternative.c (100%)
arch/riscv/Kconfig.erratas +0 -10
index b44d6ecdb46e..d18be8ff0245 100644
@@ -1,17 +1,7 @@
 menu "CPU errata selection"
 
-config RISCV_ERRATA_ALTERNATIVE
-	bool "RISC-V alternative scheme"
-	default y
-	help
-	  This Kconfig allows the kernel to automatically patch the
-	  errata required by the execution platform at run time. The
-	  code patching is performed once in the boot stages. It means
-	  that the overhead from this mechanism is just taken once.
-
 config ERRATA_SIFIVE
 	bool "SiFive errata"
-	depends on RISCV_ERRATA_ALTERNATIVE
 	help
 	  All SiFive errata Kconfig depend on this Kconfig. Disabling
 	  this Kconfig will disable all SiFive errata. Please say "Y"
arch/riscv/Kconfig.socs +0 -1
index 6ec44a22278a..3df7f7ed0d81 100644
@@ -14,7 +14,6 @@ config SOC_SIFIVE
 	select CLK_SIFIVE
 	select CLK_SIFIVE_PRCI
 	select SIFIVE_PLIC
-	select RISCV_ERRATA_ALTERNATIVE
 	select ERRATA_SIFIVE
 	help
 	  This enables support for SiFive SoC platform hardware.
arch/riscv/Makefile +1 -1
index 8a107ed18b0d..194220889969 100644
@@ -97,7 +97,7 @@ endif
 
 head-y := arch/riscv/kernel/head.o
 
-core-$(CONFIG_RISCV_ERRATA_ALTERNATIVE) += arch/riscv/errata/
+core-y += arch/riscv/errata/
 core-$(CONFIG_KVM) += arch/riscv/kvm/
 
 libs-y += arch/riscv/lib/
arch/riscv/errata/Makefile +0 -1
index b8f8740a3e44..0ca1c5281a2d 100644
@@ -1,2 +1 @@
-obj-y	+= alternative.o
 obj-$(CONFIG_ERRATA_SIFIVE) += sifive/
arch/riscv/include/asm/alternative-macros.h +0 -22
index 67406c376389..92da6b3920a3 100644
@@ -2,8 +2,6 @@
 #ifndef __ASM_ALTERNATIVE_MACROS_H
 #define __ASM_ALTERNATIVE_MACROS_H
 
-#ifdef CONFIG_RISCV_ERRATA_ALTERNATIVE
-
 #ifdef __ASSEMBLY__
 
 .macro ALT_ENTRY oldptr newptr vendor_id errata_id new_len
@@ -76,26 +74,6 @@
 
 #endif /* __ASSEMBLY__ */
 
-#else /* !CONFIG_RISCV_ERRATA_ALTERNATIVE*/
-#ifdef __ASSEMBLY__
-
-.macro __ALTERNATIVE_CFG old_c
-	\old_c
-.endm
-
-#define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k) \
-	__ALTERNATIVE_CFG old_c
-
-#else /* !__ASSEMBLY__ */
-
-#define __ALTERNATIVE_CFG(old_c)  \
-	old_c "\n"
-
-#define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k) \
-	__ALTERNATIVE_CFG(old_c)
-
-#endif /* __ASSEMBLY__ */
-#endif /* CONFIG_RISCV_ERRATA_ALTERNATIVE */
 /*
  * Usage:
  *   ALTERNATIVE(old_content, new_content, vendor_id, errata_id, CONFIG_k)
arch/riscv/kernel/Makefile +1 -0
index fb63b462ff85..62d6860af574 100644
@@ -18,6 +18,7 @@ extra-y += head.o
 extra-y += vmlinux.lds
 
 obj-y	+= soc.o
+obj-y	+= alternative.o
 obj-y	+= cpu.o
 obj-y	+= cpufeature.o
 obj-y	+= entry.o
arch/riscv/kernel/alternative.c renamed from arch/riscv/errata/alternative.c +0 -0
similarity index 100%
rename from arch/riscv/errata/alternative.c
rename to arch/riscv/kernel/alternative.c
arch/riscv/kernel/smpboot.c +0 -2
index 622f226454d5..a6d13dca1403 100644
@@ -41,9 +41,7 @@ static DECLARE_COMPLETION(cpu_running);
 void __init smp_prepare_boot_cpu(void)
 {
 	init_cpu_topology();
-#ifdef CONFIG_RISCV_ERRATA_ALTERNATIVE
 	apply_boot_alternatives();
-#endif
 }
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
arch/riscv/kernel/traps.c +1 -1
index 0daaa3e4630d..18869912d23d 100644
@@ -86,7 +86,7 @@ static void do_trap_error(struct pt_regs *regs, int signo, int code,
 	}
 }
 
-#if defined (CONFIG_XIP_KERNEL) && defined (CONFIG_RISCV_ERRATA_ALTERNATIVE)
+#if defined (CONFIG_XIP_KERNEL)
 #define __trap_section		__section(".xip.traps")
 #else
 #define __trap_section
Signature · 1 line
2.30.2
#6 lore raw

PATCH v5 3/14 riscv: allow different stages with alternatives

In reply to Heiko Stuebner

Future features may need to be applied at a different time during boot, so allow defining stages for alternatives and handling them differently depending on the stage.

Also make the alternatives-location more flexible so that future stages may provide their own location.

---
 arch/riscv/errata/sifive/errata.c    |  3 ++-
 arch/riscv/include/asm/alternative.h |  5 ++++-
 arch/riscv/kernel/alternative.c      | 25 +++++++++++++++++--------
 3 files changed, 23 insertions(+), 10 deletions(-)
arch/riscv/errata/sifive/errata.c +2 -1
index f5e5ae70e829..4fe03ac41fd7 100644
@@ -80,7 +80,8 @@ static void __init warn_miss_errata(u32 miss_errata)
 }
 
 void __init sifive_errata_patch_func(struct alt_entry *begin, struct alt_entry *end,
-				     unsigned long archid, unsigned long impid)
+				     unsigned long archid, unsigned long impid,
+				     unsigned int stage)
 {
 	struct alt_entry *alt;
 	u32 cpu_req_errata = sifive_errata_probe(archid, impid);
arch/riscv/include/asm/alternative.h +4 -1
index e625d3cafbed..811bdd8027db 100644
@@ -17,6 +17,8 @@
 #include <linux/stddef.h>
 #include <asm/hwcap.h>
 
+#define RISCV_ALTERNATIVES_BOOT		0 /* alternatives applied during regular boot */
+
 void __init apply_boot_alternatives(void);
 
 struct alt_entry {
@@ -33,7 +35,8 @@ struct errata_checkfunc_id {
 };
 
 void sifive_errata_patch_func(struct alt_entry *begin, struct alt_entry *end,
-			      unsigned long archid, unsigned long impid);
+			      unsigned long archid, unsigned long impid,
+			      unsigned int stage);
 
 #endif
 #endif
arch/riscv/kernel/alternative.c +17 -8
index 3b15885db70b..ead00c508266 100644
@@ -22,7 +22,8 @@ static struct cpu_manufacturer_info_t {
 } cpu_mfr_info;
 
 static void (*vendor_patch_func)(struct alt_entry *begin, struct alt_entry *end,
-				 unsigned long archid, unsigned long impid);
+				 unsigned long archid, unsigned long impid,
+				 unsigned int stage);
 
 static inline void __init riscv_fill_cpu_mfr_info(void)
 {
@@ -57,6 +58,18 @@ static void __init init_alternative(void)
  * a feature detect on the boot CPU). No need to worry about other CPUs
  * here.
  */
+static void __init _apply_alternatives(struct alt_entry *begin,
+				       struct alt_entry *end,
+				       unsigned int stage)
+{
+	if (!vendor_patch_func)
+		return;
+
+	vendor_patch_func(begin, end,
+			  cpu_mfr_info.arch_id, cpu_mfr_info.imp_id,
+			  stage);
+}
+
 void __init apply_boot_alternatives(void)
 {
 	/* If called on non-boot cpu things could go wrong */
@@ -64,11 +77,7 @@ void __init apply_boot_alternatives(void)
 
 	init_alternative();
 
-	if (!vendor_patch_func)
-		return;
-
-	vendor_patch_func((struct alt_entry *)__alt_start,
-			  (struct alt_entry *)__alt_end,
-			  cpu_mfr_info.arch_id, cpu_mfr_info.imp_id);
+	_apply_alternatives((struct alt_entry *)__alt_start,
+			    (struct alt_entry *)__alt_end,
+			    RISCV_ALTERNATIVES_BOOT);
 }
-
Signature · 1 line
2.30.2
#7 lore raw

PATCH v5 4/14 riscv: implement module alternatives

In reply to Heiko Stuebner

This allows alternatives to also be applied when loading modules and follows the implementation of other architectures (e.g. arm64).

---
 arch/riscv/include/asm/alternative.h |  3 ++-
 arch/riscv/kernel/alternative.c      | 16 ++++++++++++---
 arch/riscv/kernel/module.c           | 29 ++++++++++++++++++++++++++++
 3 files changed, 44 insertions(+), 4 deletions(-)
arch/riscv/include/asm/alternative.h +2 -1
index 811bdd8027db..f0657b1b3174 100644
@@ -18,8 +18,10 @@
 #include <asm/hwcap.h>
 
 #define RISCV_ALTERNATIVES_BOOT		0 /* alternatives applied during regular boot */
+#define RISCV_ALTERNATIVES_MODULE	1 /* alternatives applied during module-init */
 
 void __init apply_boot_alternatives(void);
+void apply_module_alternatives(void *start, size_t length);
 
 struct alt_entry {
 	void *old_ptr;		 /* address of original instruciton or data  */
@@ -37,6 +39,5 @@ struct errata_checkfunc_id {
 void sifive_errata_patch_func(struct alt_entry *begin, struct alt_entry *end,
 			      unsigned long archid, unsigned long impid,
 			      unsigned int stage);
-
 #endif
 #endif
arch/riscv/kernel/alternative.c +13 -3
index ead00c508266..e1849faa2fa1 100644
@@ -7,6 +7,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/cpu.h>
 #include <linux/uaccess.h>
 #include <asm/alternative.h>
@@ -58,9 +59,9 @@ static void __init init_alternative(void)
  * a feature detect on the boot CPU). No need to worry about other CPUs
  * here.
  */
-static void __init _apply_alternatives(struct alt_entry *begin,
-				       struct alt_entry *end,
-				       unsigned int stage)
+static void __init_or_module _apply_alternatives(struct alt_entry *begin,
+						 struct alt_entry *end,
+						 unsigned int stage)
 {
 	if (!vendor_patch_func)
 		return;
@@ -81,3 +82,12 @@ void __init apply_boot_alternatives(void)
 			    (struct alt_entry *)__alt_end,
 			    RISCV_ALTERNATIVES_BOOT);
 }
+
+#ifdef CONFIG_MODULES
+void apply_module_alternatives(void *start, size_t length)
+{
+	_apply_alternatives((struct alt_entry *)start,
+			    (struct alt_entry *)(start + length),
+			    RISCV_ALTERNATIVES_MODULE);
+}
+#endif
arch/riscv/kernel/module.c +29 -0
index 68a9e3d1fe16..a778abd5b8b9 100644
@@ -11,6 +11,7 @@
 #include <linux/vmalloc.h>
 #include <linux/sizes.h>
 #include <linux/pgtable.h>
+#include <asm/alternative.h>
 #include <asm/sections.h>
 
 static int apply_r_riscv_32_rela(struct module *me, u32 *location, Elf_Addr v)
@@ -416,3 +417,31 @@ void *module_alloc(unsigned long size)
 				    __builtin_return_address(0));
 }
 #endif
+
+static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
+				    const Elf_Shdr *sechdrs,
+				    const char *name)
+{
+	const Elf_Shdr *s, *se;
+	const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+	for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) {
+		if (strcmp(name, secstrs + s->sh_name) == 0)
+			return s;
+	}
+
+	return NULL;
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+		    const Elf_Shdr *sechdrs,
+		    struct module *me)
+{
+	const Elf_Shdr *s;
+
+	s = find_section(hdr, sechdrs, ".alternative");
+	if (s)
+		apply_module_alternatives((void *)s->sh_addr, s->sh_size);
+
+	return 0;
+}
Signature · 1 line
2.30.2
#8 lore raw

PATCH v5 5/14 riscv: implement ALTERNATIVE_2 macro

In reply to Heiko Stuebner

When the alternatives were added the commit already provided a template on how to implement 2 different alternatives for one piece of code.

Make this usable.

---
 arch/riscv/include/asm/alternative-macros.h | 52 +++++++++++++--------
 1 file changed, 32 insertions(+), 20 deletions(-)
arch/riscv/include/asm/alternative-macros.h +32 -20
index 92da6b3920a3..baf649293288 100644
@@ -37,6 +37,20 @@
 #define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k) \
 	__ALTERNATIVE_CFG old_c, new_c, vendor_id, errata_id, IS_ENABLED(CONFIG_k)
 
+.macro __ALTERNATIVE_CFG_2 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
+				  new_c_2, vendor_id_2, errata_id_2, enable_2
+886 :
+	\old_c
+887 :
+	ALT_NEW_CONTENT \vendor_id_1, \errata_id_1, \enable_1, \new_c_1
+	ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2
+.endm
+
+#define _ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
+				  new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2) \
+	__ALTERNATIVE_CFG_2 old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
+				   new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2)
+
 #else /* !__ASSEMBLY__ */
 
 #include <asm/asm.h>
@@ -72,6 +86,19 @@
 #define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k)	\
 	__ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, IS_ENABLED(CONFIG_k))
 
+#define __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
+				  new_c_2, vendor_id_2, errata_id_2, enable_2) \
+	"886 :\n"	\
+	old_c "\n"	\
+	"887 :\n"	\
+	ALT_NEW_CONTENT(vendor_id_1, errata_id_1, enable_1, new_c_1) \
+	ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2)
+
+#define _ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1,		\
+				  new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2)		\
+	__ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1),	\
+				   new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2))
+
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -96,25 +123,10 @@
  * this case, this vendor can create a new macro ALTERNATIVE_2() based
  * on the following sample code and then replace ALTERNATIVE() with
  * ALTERNATIVE_2() to append its customized content.
- *
- * .macro __ALTERNATIVE_CFG_2 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
- *                                   new_c_2, vendor_id_2, errata_id_2, enable_2
- * 886 :
- *      \old_c
- * 887 :
- *      ALT_NEW_CONTENT \vendor_id_1, \errata_id_1, \enable_1, \new_c_1
- *      ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2
- * .endm
- *
- * #define _ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
- *                                   new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2) \
- *        __ALTERNATIVE_CFG_2 old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
- *                                   new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2) \
- *
- * #define ALTERNATIVE_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
- *                                    new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2) \
- *         _ALTERNATIVE_CFG_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
- *                                         new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2)
- *
  */
+#define ALTERNATIVE_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
+				   new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2) \
+	_ALTERNATIVE_CFG_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
+					new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2)
+
 #endif
Signature · 1 line
2.30.2
#9 lore raw

PATCH v5 6/14 riscv: extend concatenated alternatives-lines to the same length

In reply to Heiko Stuebner

ALT_NEW_CONTENT already uses same-length assembler lines, so extend this to the other elements as well.

This makes it more readable when these elements need to be extended in the future.

---
 arch/riscv/include/asm/alternative-macros.h | 30 ++++++++++-----------
 1 file changed, 15 insertions(+), 15 deletions(-)
arch/riscv/include/asm/alternative-macros.h +15 -15
index baf649293288..c0fb11fad631 100644
@@ -56,14 +56,14 @@
 #include <asm/asm.h>
 #include <linux/stringify.h>
 
-#define ALT_ENTRY(oldptr, newptr, vendor_id, errata_id, newlen) \
-	RISCV_PTR " " oldptr "\n" \
-	RISCV_PTR " " newptr "\n" \
-	REG_ASM " " vendor_id "\n" \
-	REG_ASM " " newlen "\n" \
+#define ALT_ENTRY(oldptr, newptr, vendor_id, errata_id, newlen)		\
+	RISCV_PTR " " oldptr "\n"					\
+	RISCV_PTR " " newptr "\n"					\
+	REG_ASM " " vendor_id "\n"					\
+	REG_ASM " " newlen "\n"						\
 	".word " errata_id "\n"
 
-#define ALT_NEW_CONTENT(vendor_id, errata_id, enable, new_c) \
+#define ALT_NEW_CONTENT(vendor_id, errata_id, enable, new_c)		\
 	".if " __stringify(enable) " == 1\n"				\
 	".pushsection .alternative, \"a\"\n"				\
 	ALT_ENTRY("886b", "888f", __stringify(vendor_id), __stringify(errata_id), "889f - 888f") \
@@ -77,21 +77,21 @@
 	".org	. - (889b - 888b) + (887b - 886b)\n"			\
 	".endif\n"
 
-#define __ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, enable) \
-	"886 :\n"	\
-	old_c "\n"	\
-	"887 :\n"	\
+#define __ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, enable)	\
+	"886 :\n"							\
+	old_c "\n"							\
+	"887 :\n"							\
 	ALT_NEW_CONTENT(vendor_id, errata_id, enable, new_c)
 
-#define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k)	\
+#define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k) \
 	__ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, IS_ENABLED(CONFIG_k))
 
 #define __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
 				  new_c_2, vendor_id_2, errata_id_2, enable_2) \
-	"886 :\n"	\
-	old_c "\n"	\
-	"887 :\n"	\
-	ALT_NEW_CONTENT(vendor_id_1, errata_id_1, enable_1, new_c_1) \
+	"886 :\n"							\
+	old_c "\n"							\
+	"887 :\n"							\
+	ALT_NEW_CONTENT(vendor_id_1, errata_id_1, enable_1, new_c_1)	\
 	ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2)
 
 #define _ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1,		\
Signature · 1 line
2.30.2
#10 lore raw

PATCH v5 7/14 riscv: prevent compressed instructions in alternatives

In reply to Heiko Stuebner

Instructions are opportunistically compressed by the RISC-V assembler when possible, but in alternatives-blocks both the old and new content need to be the same size, so having the toolchain do somewhat random optimizations will cause strange side-effects like
"attempt to move .org backwards" compile-time errors.

Already a simple "and" used in alternatives assembly will cause these mismatched code sizes.

So prevent compressed instructions to be generated in alternatives- code and use option-push and -pop to limit this to the relevant code blocks

---
 arch/riscv/include/asm/alternative-macros.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
arch/riscv/include/asm/alternative-macros.h +18 -0
index c0fb11fad631..3a52884bf23d 100644
@@ -19,7 +19,10 @@
 	.popsection
 	.subsection 1
 888 :
+	.option push
+	.option norvc
 	\new_c
+	.option pop
 889 :
 	.previous
 	.org    . - (889b - 888b) + (887b - 886b)
@@ -29,7 +32,10 @@
 
 .macro __ALTERNATIVE_CFG old_c, new_c, vendor_id, errata_id, enable
 886 :
+	.option push
+	.option norvc
 	\old_c
+	.option pop
 887 :
 	ALT_NEW_CONTENT \vendor_id, \errata_id, \enable, \new_c
 .endm
@@ -40,7 +46,10 @@
 .macro __ALTERNATIVE_CFG_2 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
 				  new_c_2, vendor_id_2, errata_id_2, enable_2
 886 :
+	.option push
+	.option norvc
 	\old_c
+	.option pop
 887 :
 	ALT_NEW_CONTENT \vendor_id_1, \errata_id_1, \enable_1, \new_c_1
 	ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2
@@ -70,7 +79,10 @@
 	".popsection\n"							\
 	".subsection 1\n"						\
 	"888 :\n"							\
+	".option push\n"						\
+	".option norvc\n"						\
 	new_c "\n"							\
+	".option pop\n"							\
 	"889 :\n"							\
 	".previous\n"							\
 	".org	. - (887b - 886b) + (889b - 888b)\n"			\
@@ -79,7 +91,10 @@
 
 #define __ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, enable)	\
 	"886 :\n"							\
+	".option push\n"						\
+	".option norvc\n"						\
 	old_c "\n"							\
+	".option pop\n"							\
 	"887 :\n"							\
 	ALT_NEW_CONTENT(vendor_id, errata_id, enable, new_c)
 
@@ -89,7 +104,10 @@
 #define __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
 				  new_c_2, vendor_id_2, errata_id_2, enable_2) \
 	"886 :\n"							\
+	".option push\n"						\
+	".option norvc\n"						\
 	old_c "\n"							\
+	".option pop\n"							\
 	"887 :\n"							\
 	ALT_NEW_CONTENT(vendor_id_1, errata_id_1, enable_1, new_c_1)	\
 	ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2)
Signature · 1 line
2.30.2
#11 lore raw

PATCH v5 8/14 riscv: move boot alternatives to a slightly earlier position

In reply to Heiko Stuebner

Move the application of boot alternatives to soc_early_init(). This allows to catch more generic cases of code needing patches than doing it in smp_prepare_boot_cpu() and also makes it actually work if CONFIG_SMP is disabled for whatever reason.

The position is chosen mainly as it is before the actual soc early init runs but also already allows accessing the devicetree via fdt_* functions.

---
 arch/riscv/kernel/head.S    | 2 ++
 arch/riscv/kernel/smpboot.c | 2 --
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/riscv/kernel/head.S +2 -0
index db062279d9ed..432fe7b3f897 100644
@@ -10,6 +10,7 @@
 #include <asm/thread_info.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
+#include <asm/alternative.h>
 #include <asm/csr.h>
 #include <asm/cpu_ops_sbi.h>
 #include <asm/hwcap.h>
@@ -341,6 +342,7 @@ clear_bss_done:
 	call kasan_early_init
 #endif
 	/* Start the kernel */
+	call apply_boot_alternatives
 	call soc_early_init
 	tail start_kernel
 
arch/riscv/kernel/smpboot.c +0 -2
index a6d13dca1403..f1e4948a4b52 100644
@@ -32,7 +32,6 @@
 #include <asm/sections.h>
 #include <asm/sbi.h>
 #include <asm/smp.h>
-#include <asm/alternative.h>
 
 #include "head.h"
 
@@ -41,7 +40,6 @@ static DECLARE_COMPLETION(cpu_running);
 void __init smp_prepare_boot_cpu(void)
 {
 	init_cpu_topology();
-	apply_boot_alternatives();
 }
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
Signature · 1 line
2.30.2
#12 lore raw

PATCH v5 9/14 riscv: Fix accessing pfn bits in PTEs for non-32bit variants

In reply to Heiko Stuebner

On rv32 the PFN part of PTEs is defined to use bits [xlen-1:10] while on rv64 it is defined to use bits [53:10], leaving [63:54] as reserved.

With upcoming optional extensions like svpbmt these previously reserved bits will get used so simply right-shifting the PTE to get the PFN won't be enough.

So introduce a _PAGE_PFN_MASK constant to mask the correct bits for both rv32 and rv64 before shifting.

---
 arch/riscv/include/asm/pgtable-32.h   |  8 ++++++++
 arch/riscv/include/asm/pgtable-64.h   | 14 +++++++++++---
 arch/riscv/include/asm/pgtable-bits.h |  6 ------
 arch/riscv/include/asm/pgtable.h      |  6 +++---
 4 files changed, 22 insertions(+), 12 deletions(-)
arch/riscv/include/asm/pgtable-32.h +8 -0
index 5b2e79e5bfa5..e266a4fe7f43 100644
@@ -7,6 +7,7 @@
 #define _ASM_RISCV_PGTABLE_32_H
 
 #include <asm-generic/pgtable-nopmd.h>
+#include <linux/bits.h>
 #include <linux/const.h>
 
 /* Size of region mapped by a page global directory */
@@ -16,4 +17,11 @@
 
 #define MAX_POSSIBLE_PHYSMEM_BITS 34
 
+/*
+ * rv32 PTE format:
+ * | XLEN-1  10 | 9             8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
+ *       PFN      reserved for SW   D   A   G   U   X   W   R   V
+ */
+#define _PAGE_PFN_MASK  GENMASK(31, 10)
+
 #endif /* _ASM_RISCV_PGTABLE_32_H */
arch/riscv/include/asm/pgtable-64.h +11 -3
index 228261aa9628..706f0897437d 100644
@@ -6,6 +6,7 @@
 #ifndef _ASM_RISCV_PGTABLE_64_H
 #define _ASM_RISCV_PGTABLE_64_H
 
+#include <linux/bits.h>
 #include <linux/const.h>
 
 #define PGDIR_SHIFT     30
@@ -28,6 +29,13 @@ typedef struct {
 
 #define PTRS_PER_PMD    (PAGE_SIZE / sizeof(pmd_t))
 
+/*
+ * rv64 PTE format:
+ * | 63 | 62 61 | 60 54 | 53  10 | 9             8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
+ *   N      MT     RSV    PFN      reserved for SW   D   A   G   U   X   W   R   V
+ */
+#define _PAGE_PFN_MASK  GENMASK(53, 10)
+
 static inline int pud_present(pud_t pud)
 {
 	return (pud_val(pud) & _PAGE_PRESENT);
@@ -61,12 +69,12 @@ static inline void pud_clear(pud_t *pudp)
 
 static inline pmd_t *pud_pgtable(pud_t pud)
 {
-	return (pmd_t *)pfn_to_virt(pud_val(pud) >> _PAGE_PFN_SHIFT);
+	return (pmd_t *)pfn_to_virt((pud_val(pud) & _PAGE_PFN_MASK) >> _PAGE_PFN_SHIFT);
 }
 
 static inline struct page *pud_page(pud_t pud)
 {
-	return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
+	return pfn_to_page((pud_val(pud) & _PAGE_PFN_MASK) >> _PAGE_PFN_SHIFT);
 }
 
 static inline pmd_t pfn_pmd(unsigned long pfn, pgprot_t prot)
@@ -76,7 +84,7 @@ static inline pmd_t pfn_pmd(unsigned long pfn, pgprot_t prot)
 
 static inline unsigned long _pmd_pfn(pmd_t pmd)
 {
-	return pmd_val(pmd) >> _PAGE_PFN_SHIFT;
+	return (pmd_val(pmd) & _PAGE_PFN_MASK) >> _PAGE_PFN_SHIFT;
 }
 
 #define mk_pmd(page, prot)    pfn_pmd(page_to_pfn(page), prot)
arch/riscv/include/asm/pgtable-bits.h +0 -6
index 2ee413912926..4831122d559d 100644
@@ -6,12 +6,6 @@
 #ifndef _ASM_RISCV_PGTABLE_BITS_H
 #define _ASM_RISCV_PGTABLE_BITS_H
 
-/*
- * PTE format:
- * | XLEN-1  10 | 9             8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
- *       PFN      reserved for SW   D   A   G   U   X   W   R   V
- */
-
 #define _PAGE_ACCESSED_OFFSET 6
 
 #define _PAGE_PRESENT   (1 << 0)
arch/riscv/include/asm/pgtable.h +3 -3
index bf204e7c1f74..5cf7465a96c5 100644
@@ -232,12 +232,12 @@ static inline unsigned long _pgd_pfn(pgd_t pgd)
 
 static inline struct page *pmd_page(pmd_t pmd)
 {
-	return pfn_to_page(pmd_val(pmd) >> _PAGE_PFN_SHIFT);
+	return pfn_to_page((pmd_val(pmd) & _PAGE_PFN_MASK) >> _PAGE_PFN_SHIFT);
 }
 
 static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 {
-	return (unsigned long)pfn_to_virt(pmd_val(pmd) >> _PAGE_PFN_SHIFT);
+	return (unsigned long)pfn_to_virt((pmd_val(pmd) & _PAGE_PFN_MASK) >> _PAGE_PFN_SHIFT);
 }
 
 static inline pte_t pmd_pte(pmd_t pmd)
@@ -253,7 +253,7 @@ static inline pte_t pud_pte(pud_t pud)
 /* Yields the page frame number (PFN) of a page table entry */
 static inline unsigned long pte_pfn(pte_t pte)
 {
-	return (pte_val(pte) >> _PAGE_PFN_SHIFT);
+	return ((pte_val(pte) & _PAGE_PFN_MASK) >> _PAGE_PFN_SHIFT);
 }
 
 #define pte_page(x)     pfn_to_page(pte_pfn(x))
Signature · 1 line
2.30.2
#13 lore raw

PATCH v5 10/14 riscv: add cpufeature handling via alternatives

In reply to Heiko Stuebner

Some cpufeatures should be handled via the alternatives mechanism to not incur penalties on unsupporting variants.

So add a mechanism to handle these similar to cpu erratas.

---
 arch/riscv/include/asm/alternative.h |  3 ++
 arch/riscv/include/asm/errata_list.h |  2 +
 arch/riscv/kernel/alternative.c      |  2 +
 arch/riscv/kernel/cpufeature.c       | 55 +++++++++++++++++++++++++++-
 4 files changed, 61 insertions(+), 1 deletion(-)
arch/riscv/include/asm/alternative.h +3 -0
index f0657b1b3174..cf3b22173834 100644
@@ -39,5 +39,8 @@ struct errata_checkfunc_id {
 void sifive_errata_patch_func(struct alt_entry *begin, struct alt_entry *end,
 			      unsigned long archid, unsigned long impid,
 			      unsigned int stage);
+
+void riscv_cpufeature_patch_func(struct alt_entry *begin, struct alt_entry *end,
+				 unsigned int stage);
 #endif
 #endif
arch/riscv/include/asm/errata_list.h +2 -0
index 5f1046e82d9f..6b95bd9aee82 100644
@@ -14,6 +14,8 @@
 #define	ERRATA_SIFIVE_NUMBER 2
 #endif
 
+#define	CPUFEATURE_NUMBER 0
+
 #ifdef __ASSEMBLY__
 
 #define ALT_INSN_FAULT(x)						\
arch/riscv/kernel/alternative.c +2 -0
index e1849faa2fa1..54913857b682 100644
@@ -63,6 +63,8 @@ static void __init_or_module _apply_alternatives(struct alt_entry *begin,
 						 struct alt_entry *end,
 						 unsigned int stage)
 {
+	riscv_cpufeature_patch_func(begin, end, stage);
+
 	if (!vendor_patch_func)
 		return;
 
arch/riscv/kernel/cpufeature.c +54 -1

65 lines not on this page · raw message

Signature · 1 line
2.30.2
#14 lore raw

PATCH v5 11/14 dt-bindings: riscv: add MMU Standard Extensions support for Svpbmt

In reply to Heiko Stuebner

From: Wei Fu <[email protected]>

Previous patch has added svpbmt in arch/riscv and add "riscv,svpmbt" in the DT mmu node. Update dt-bindings related property here.

---
 Documentation/devicetree/bindings/riscv/cpus.yaml | 10 ++++++++++
 1 file changed, 10 insertions(+)
Documentation/devicetree/bindings/riscv/cpus.yaml +10 -0
index aa5fb64d57eb..3ad2593f1400 100644
@@ -63,6 +63,16 @@ properties:
       - riscv,sv48
       - riscv,none
 
+  mmu:
+    description:
+      Describes the CPU's MMU Standard Extensions support.
+      These values originate from the RISC-V Privileged
+      Specification document, available from
+      https://riscv.org/specifications/
+    $ref: '/schemas/types.yaml#/definitions/string'
+    enum:
+      - riscv,svpbmt
+
   riscv,isa:
     description:
       Identifies the specific RISC-V instruction set architecture
Signature · 1 line
2.30.2
maintainer
#15 lore raw

Re: [PATCH v5 11/14] dt-bindings: riscv: add MMU Standard Extensions support for Svpbmt

Quoted 21 lines · Heiko Stuebner

From: Wei Fu <[email protected]>

Previous patch has added svpbmt in arch/riscv and add "riscv,svpmbt" in the DT mmu node. Update dt-bindings related property here.

---
 Documentation/devicetree/bindings/riscv/cpus.yaml | 10 ++++++++++
 1 file changed, 10 insertions(+)
Documentation/devicetree/bindings/riscv/cpus.yaml +0 -0
index aa5fb64d57eb..3ad2593f1400 100644

Documentation/devicetree/bindings/riscv/cpus.yaml properties: · line 66

Quoted 4 lines
Documentation/devicetree/bindings/riscv/cpus.yaml +1 -0
@@ -63,6 +63,16 @@ properties:
       - riscv,sv48
       - riscv,none
 
+  mmu:

riscv,mmu

Documentation/devicetree/bindings/riscv/cpus.yaml properties: · line 74

Quoted 8 lines
Documentation/devicetree/bindings/riscv/cpus.yaml +8 -0
+    description:
+      Describes the CPU's MMU Standard Extensions support.
+      These values originate from the RISC-V Privileged
+      Specification document, available from
+      https://riscv.org/specifications/
+    $ref: '/schemas/types.yaml#/definitions/string'
+    enum:
+      - riscv,svpbmt

Are there per vendor MMU extensions? If not, drop the 'riscv,' part.

Quoted 8 lines
Documentation/devicetree/bindings/riscv/cpus.yaml +1 -0
+
   riscv,isa:
     description:
       Identifies the specific RISC-V instruction set architecture
Signature · 1 line
2.30.2
#16 lore raw

Re: [PATCH v5 11/14] dt-bindings: riscv: add MMU Standard Extensions support for Svpbmt

Am Freitag, 4. Februar 2022, 23:33:42 CET schrieb Rob Herring:

Quoted 38 lines · Heiko Stuebner
Quoted 21 lines

From: Wei Fu <[email protected]>

Previous patch has added svpbmt in arch/riscv and add "riscv,svpmbt" in the DT mmu node. Update dt-bindings related property here.

---
 Documentation/devicetree/bindings/riscv/cpus.yaml | 10 ++++++++++
 1 file changed, 10 insertions(+)
Documentation/devicetree/bindings/riscv/cpus.yaml +0 -0
index aa5fb64d57eb..3ad2593f1400 100644

Documentation/devicetree/bindings/riscv/cpus.yaml properties: · line 66

Quoted 4 lines
Documentation/devicetree/bindings/riscv/cpus.yaml +1 -0
@@ -63,6 +63,16 @@ properties:
       - riscv,sv48
       - riscv,none
 
+  mmu:

riscv,mmu

Documentation/devicetree/bindings/riscv/cpus.yaml properties: · line 74

Quoted 8 lines
Documentation/devicetree/bindings/riscv/cpus.yaml +8 -0
+    description:
+      Describes the CPU's MMU Standard Extensions support.
+      These values originate from the RISC-V Privileged
+      Specification document, available from
+      https://riscv.org/specifications/
+    $ref: '/schemas/types.yaml#/definitions/string'
+    enum:
+      - riscv,svpbmt
Quoted 1 line

Are there per vendor MMU extensions? If not, drop the 'riscv,' part.

Judging by the somewhat wild-west nature, I guess there might already be non-riscv extensions existing somewhere, or at least the probability is quite high that there will be in the future ;-)

Quoted 6 lines

Documentation/devicetree/bindings/riscv/cpus.yaml properties: · line 78

Quoted 5 lines
Documentation/devicetree/bindings/riscv/cpus.yaml +1 -0
+
   riscv,isa:
     description:
       Identifies the specific RISC-V instruction set architecture

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

#17 lore raw

PATCH v5 12/14 riscv: add RISC-V Svpbmt extension supports

In reply to Heiko Stuebner

From: Wei Fu <[email protected]>

This patch follows the standard pure RISC-V Svpbmt extension in privilege spec to solve the non-coherent SOC dma synchronization issues.

Here is the svpbmt PTE format:

| 63 | 62-61 | 60-8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
  N     MT     RSW    D   A   G   U   X   W   R   V
        ^

Of the Reserved bits [63:54] in a leaf PTE, the high bit is already allocated (as the N bit), so bits [62:61] are used as the MT (aka MemType) field. This field specifies one of three memory types that are close equivalents (or equivalent in effect) to the three main x86 and ARMv8 memory types - as shown in the following table.

RISC-V
Encoding &

MemType     RISC-V Description
----------  ------------------------------------------------
00 - PMA    Normal Cacheable, No change to implied PMA memory type
01 - NC     Non-cacheable, idempotent, weakly-ordered Main Memory
10 - IO     Non-cacheable, non-idempotent, strongly-ordered I/O memory
11 - Rsvd   Reserved for future standard use

The standard protection_map[] needn't be modified because the "PMA" type keeps the highest bits zero. The implementation is limited to arch/riscv/* as it uses an inline function and the alternatives mechanism to generate the _PAGE_MTMASK/IO/NOCACHE values for pgprot_noncached (& writecombine) in pgtable.h on both svpbmt and non-svpbmt-capable chips.

[moved to use the alternatives mechanism]
Cc Palmer Dabbelt <[email protected]>
Cc Christoph Hellwig <[email protected]>
Cc Anup Patel <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc Atish Patra <[email protected]>
Cc Drew Fustini <[email protected]>
Cc Wei Fu <[email protected]>
Cc Wei Wu <[email protected]>
Cc Chen-Yu Tsai <[email protected]>
Cc Maxime Ripard <[email protected]>
Cc Daniel Lustig <[email protected]>
Cc Greg Favor <[email protected]>
Cc Andrea Mondelli <[email protected]>
Cc Jonathan Behrens <[email protected]>
Cc Xinhaoqu (Freddie) <[email protected]>
Cc Bill Huffman <[email protected]>
Cc Nick Kossifidis <[email protected]>
Cc Allen Baum <[email protected]>
Cc Josh Scheid <[email protected]>
Cc Richard Trauben <[email protected]>
---
 arch/riscv/include/asm/errata_list.h  | 13 ++++-
 arch/riscv/include/asm/pgtable-32.h   |  9 +++
 arch/riscv/include/asm/pgtable-64.h   | 47 ++++++++++++++++
 arch/riscv/include/asm/pgtable-bits.h |  4 --
 arch/riscv/include/asm/pgtable.h      | 29 ++++++++--
 arch/riscv/kernel/cpufeature.c        | 79 +++++++++++++++++++++++++++
 6 files changed, 171 insertions(+), 10 deletions(-)
arch/riscv/include/asm/errata_list.h +12 -1
index 6b95bd9aee82..a4a9b0842922 100644
@@ -14,7 +14,8 @@
 #define	ERRATA_SIFIVE_NUMBER 2
 #endif
 
-#define	CPUFEATURE_NUMBER 0
+#define	CPUFEATURE_SVPBMT 0
+#define	CPUFEATURE_NUMBER 1
 
 #ifdef __ASSEMBLY__
 
@@ -36,6 +37,16 @@ asm(ALTERNATIVE("sfence.vma %0", "sfence.vma", SIFIVE_VENDOR_ID,	\
 		ERRATA_SIFIVE_CIP_1200, CONFIG_ERRATA_SIFIVE_CIP_1200)	\
 		: : "r" (addr) : "memory")
 
+/*
+ * _val is marked as "will be overwritten", so need to set it to 0
+ * in the default case.
+ */
+#define ALT_SVPBMT_SHIFT 61
+#define ALT_SVPBMT(_val, prot)						\
+asm(ALTERNATIVE("li %0, 0\t\nnop", "li %0, %1\t\nslli %0,%0,%2", 0,	\
+		CPUFEATURE_SVPBMT, CONFIG_64BIT)			\
+		: "=r"(_val) : "I"(prot##_SVPBMT >> ALT_SVPBMT_SHIFT), "I"(ALT_SVPBMT_SHIFT))
+
 #endif /* __ASSEMBLY__ */
 
 #endif
arch/riscv/include/asm/pgtable-32.h +9 -0
index e266a4fe7f43..59ba1fbaf784 100644
@@ -24,4 +24,13 @@
  */
 #define _PAGE_PFN_MASK  GENMASK(31, 10)
 
+#define _PAGE_NOCACHE		0
+#define _PAGE_IO		0
+#define _PAGE_MTMASK		0
+
+/* Set of bits to preserve across pte_modify() */
+#define _PAGE_CHG_MASK  (~(unsigned long)(_PAGE_PRESENT | _PAGE_READ |	\
+					  _PAGE_WRITE | _PAGE_EXEC |	\
+					  _PAGE_USER | _PAGE_GLOBAL))
+
 #endif /* _ASM_RISCV_PGTABLE_32_H */
arch/riscv/include/asm/pgtable-64.h +47 -0

59 lines not on this page · raw message

arch/riscv/include/asm/pgtable-bits.h +0 -4
index 4831122d559d..ee908a142f3c 100644
@@ -29,10 +29,6 @@
 
 #define _PAGE_PFN_SHIFT 10
 
-/* Set of bits to preserve across pte_modify() */
-#define _PAGE_CHG_MASK  (~(unsigned long)(_PAGE_PRESENT | _PAGE_READ |	\
-					  _PAGE_WRITE | _PAGE_EXEC |	\
-					  _PAGE_USER | _PAGE_GLOBAL))
 /*
  * when all of R/W/X are zero, the PTE is a pointer to the next level
  * of the page table; otherwise, it is a leaf PTE.
arch/riscv/include/asm/pgtable.h +24 -5
index 5cf7465a96c5..a189a21a7c8a 100644
@@ -148,11 +148,8 @@
 
 #define PAGE_TABLE		__pgprot(_PAGE_TABLE)
 
-/*
- * The RISC-V ISA doesn't yet specify how to query or modify PMAs, so we can't
- * change the properties of memory regions.
- */
-#define _PAGE_IOREMAP _PAGE_KERNEL
+#define _PAGE_IOREMAP	((_PAGE_KERNEL & ~_PAGE_MTMASK) | _PAGE_IO)
+#define PAGE_KERNEL_IO		__pgprot(_PAGE_IOREMAP)
 
 extern pgd_t swapper_pg_dir[];
 
@@ -492,6 +489,28 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
 	return ptep_test_and_clear_young(vma, address, ptep);
 }
 
+#define pgprot_noncached pgprot_noncached
+static inline pgprot_t pgprot_noncached(pgprot_t _prot)
+{
+	unsigned long prot = pgprot_val(_prot);
+
+	prot &= ~_PAGE_MTMASK;
+	prot |= _PAGE_IO;
+
+	return __pgprot(prot);
+}
+
+#define pgprot_writecombine pgprot_writecombine
+static inline pgprot_t pgprot_writecombine(pgprot_t _prot)
+{
+	unsigned long prot = pgprot_val(_prot);
+
+	prot &= ~_PAGE_MTMASK;
+	prot |= _PAGE_NOCACHE;
+
+	return __pgprot(prot);
+}
+
 /*
  * THP functions
  */
arch/riscv/kernel/cpufeature.c +79 -0

92 lines not on this page · raw message

Signature · 1 line
2.30.2
#18 lore raw

PATCH v5 13/14 riscv: remove FIXMAP_PAGE_IO and fall back to its default value

In reply to Heiko Stuebner

If not defined in the arch, FIXMAP_PAGE_IO defaults to PAGE_KERNEL_IO, which we defined when adding the svpbmt implementation.

So drop the FIXMAP_PAGE_IO riscv define.

---
 arch/riscv/include/asm/fixmap.h | 2 --
 1 file changed, 2 deletions(-)
arch/riscv/include/asm/fixmap.h +0 -2
index 54cbf07fb4e9..899b59bdb9eb 100644
@@ -43,8 +43,6 @@ enum fixed_addresses {
 	__end_of_fixed_addresses
 };
 
-#define FIXMAP_PAGE_IO		PAGE_KERNEL
-
 #define __early_set_fixmap	__set_fixmap
 
 #define __late_set_fixmap	__set_fixmap
Signature · 7 lines
2.30.2


_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
#19 lore raw

PATCH v5 14/14 riscv: add memory-type errata for T-Head

In reply to Heiko Stuebner

Some current cpus based on T-Head cores implement memory-types way different than described in the svpbmt spec even going so far as using PTE bits marked as reserved.

Add the T-Head vendor-id and necessary errata code to replace the affected instructions.

---
 arch/riscv/Kconfig.erratas             | 19 ++++++
 arch/riscv/errata/Makefile             |  1 +
 arch/riscv/errata/sifive/errata.c      |  7 ++-
 arch/riscv/errata/thead/Makefile       |  1 +
 arch/riscv/errata/thead/errata.c       | 85 ++++++++++++++++++++++++++
 arch/riscv/include/asm/alternative.h   |  5 ++
 arch/riscv/include/asm/errata_list.h   | 47 ++++++++++++--
 arch/riscv/include/asm/pgtable-64.h    | 18 +++++-
 arch/riscv/include/asm/pgtable.h       | 18 +++++-
 arch/riscv/include/asm/vendorid_list.h |  1 +
 arch/riscv/kernel/alternative.c        | 14 +++++
 arch/riscv/kernel/cpufeature.c         |  2 +
 arch/riscv/mm/init.c                   |  2 +
 13 files changed, 211 insertions(+), 9 deletions(-)
 create mode 100644 arch/riscv/errata/thead/Makefile
 create mode 100644 arch/riscv/errata/thead/errata.c
arch/riscv/Kconfig.erratas +19 -0
index d18be8ff0245..380ec039c3dc 100644
@@ -31,4 +31,23 @@ config ERRATA_SIFIVE_CIP_1200
 
 	  If you don't know what to do here, say "Y".
 
+config ERRATA_THEAD
+	bool "T-HEAD errata"
+	help
+	  All T-HEAD errata Kconfig depend on this Kconfig. Disabling
+	  this Kconfig will disable all T-HEAD errata. Please say "Y"
+	  here if your platform uses T-HEAD CPU cores.
+
+	  If you don't know what to do here, say "Y".
+
+config ERRATA_THEAD_PBMT
+	bool "Apply T-Head memory type errata"
+	depends on ERRATA_THEAD && 64BIT
+	default y
+	help
+	  This will apply the memory type errata to handle the non-standard
+	  memory type bits in page-table-entries on T-Head SoCs.
+
+	  If you don't know what to do here, say "Y".
+
 endmenu
arch/riscv/errata/Makefile +1 -0
index 0ca1c5281a2d..a1055965fbee 100644
@@ -1 +1,2 @@
 obj-$(CONFIG_ERRATA_SIFIVE) += sifive/
+obj-$(CONFIG_ERRATA_THEAD) += thead/
arch/riscv/errata/sifive/errata.c +6 -1
index 4fe03ac41fd7..f933d6cdf304 100644
@@ -84,10 +84,15 @@ void __init sifive_errata_patch_func(struct alt_entry *begin, struct alt_entry *
 				     unsigned int stage)
 {
 	struct alt_entry *alt;
-	u32 cpu_req_errata = sifive_errata_probe(archid, impid);
+	u32 cpu_req_errata;
 	u32 cpu_apply_errata = 0;
 	u32 tmp;
 
+	if (stage == RISCV_ALTERNATIVES_EARLY_BOOT)
+		return;
+
+	cpu_req_errata = sifive_errata_probe(archid, impid);
+
 	for (alt = begin; alt < end; alt++) {
 		if (alt->vendor_id != SIFIVE_VENDOR_ID)
 			continue;
arch/riscv/errata/thead/Makefile new file +1 -0
new file mode 100644
index 000000000000..2d644e19caef
@@ -0,0 +1 @@
+obj-y += errata.o
arch/riscv/errata/thead/errata.c new file +85 -0

85 lines not on this page · raw message

arch/riscv/include/asm/alternative.h +5 -0
index cf3b22173834..d1154c91ab03 100644
@@ -19,8 +19,10 @@
 
 #define RISCV_ALTERNATIVES_BOOT		0 /* alternatives applied during regular boot */
 #define RISCV_ALTERNATIVES_MODULE	1 /* alternatives applied during module-init */
+#define RISCV_ALTERNATIVES_EARLY_BOOT	2 /* alternatives applied before mmu start */
 
 void __init apply_boot_alternatives(void);
+void __init apply_early_boot_alternatives(void);
 void apply_module_alternatives(void *start, size_t length);
 
 struct alt_entry {
@@ -39,6 +41,9 @@ struct errata_checkfunc_id {
 void sifive_errata_patch_func(struct alt_entry *begin, struct alt_entry *end,
 			      unsigned long archid, unsigned long impid,
 			      unsigned int stage);
+void thead_errata_patch_func(struct alt_entry *begin, struct alt_entry *end,
+			     unsigned long archid, unsigned long impid,
+			     unsigned int stage);
 
 void riscv_cpufeature_patch_func(struct alt_entry *begin, struct alt_entry *end,
 				 unsigned int stage);
arch/riscv/include/asm/errata_list.h +43 -4

59 lines not on this page · raw message

arch/riscv/include/asm/pgtable-64.h +17 -1
index 58b34ef74acb..e7ce01cdc235 100644
@@ -49,6 +49,18 @@ typedef struct {
 #define _PAGE_IO_SVPBMT		(1UL << 62)
 #define _PAGE_MTMASK_SVPBMT	(_PAGE_NOCACHE_SVPBMT | _PAGE_IO_SVPBMT)
 
+/*
+ * [63:59] T-Head Memory Type definitions:
+ *
+ * 00000 - NC   Weakly-ordered, Non-cacheable, Non-bufferable, Non-shareable, Non-trustable
+ * 01110 - PMA  Weakly-ordered, Cacheable, Bufferable, Shareable, Non-trustable
+ * 10000 - IO   Strongly-ordered, Non-cacheable, Non-bufferable, Non-shareable, Non-trustable
+ */
+#define _PAGE_PMA_THEAD		((1UL << 62) | (1UL << 61) | (1UL << 60))
+#define _PAGE_NOCACHE_THEAD	0UL
+#define _PAGE_IO_THEAD		(1UL << 63)
+#define _PAGE_MTMASK_THEAD	(_PAGE_PMA_THEAD | _PAGE_IO_THEAD | (1UL << 59))
+
 static inline u64 riscv_page_mtmask(void)
 {
 	u64 val;
@@ -126,7 +138,11 @@ static inline struct page *pud_page(pud_t pud)
 
 static inline pmd_t pfn_pmd(unsigned long pfn, pgprot_t prot)
 {
-	return __pmd((pfn << _PAGE_PFN_SHIFT) | pgprot_val(prot));
+	unsigned long prot_val = pgprot_val(prot);
+
+	ALT_THEAD_PMA(prot_val);
+
+	return __pmd((pfn << _PAGE_PFN_SHIFT) | prot_val);
 }
 
 static inline unsigned long _pmd_pfn(pmd_t pmd)
arch/riscv/include/asm/pgtable.h +15 -3
index a189a21a7c8a..c3b9220b2523 100644
@@ -219,7 +219,11 @@ static inline void pmd_clear(pmd_t *pmdp)
 
 static inline pgd_t pfn_pgd(unsigned long pfn, pgprot_t prot)
 {
-	return __pgd((pfn << _PAGE_PFN_SHIFT) | pgprot_val(prot));
+	unsigned long prot_val = pgprot_val(prot);
+
+	ALT_THEAD_PMA(prot_val);
+
+	return __pgd((pfn << _PAGE_PFN_SHIFT) | prot_val);
 }
 
 static inline unsigned long _pgd_pfn(pgd_t pgd)
@@ -258,7 +262,11 @@ static inline unsigned long pte_pfn(pte_t pte)
 /* Constructs a page table entry */
 static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
 {
-	return __pte((pfn << _PAGE_PFN_SHIFT) | pgprot_val(prot));
+	unsigned long prot_val = pgprot_val(prot);
+
+	ALT_THEAD_PMA(prot_val);
+
+	return __pte((pfn << _PAGE_PFN_SHIFT) | prot_val);
 }
 
 #define mk_pte(page, prot)       pfn_pte(page_to_pfn(page), prot)
@@ -367,7 +375,11 @@ static inline int pmd_protnone(pmd_t pmd)
 /* Modify page protection bits */
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
-	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+	unsigned long newprot_val = pgprot_val(newprot);
+
+	ALT_THEAD_PMA(newprot_val);
+
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | newprot_val);
 }
 
 #define pgd_ERROR(e) \
arch/riscv/include/asm/vendorid_list.h +1 -0
index 9d934215b3c8..cb89af3f0704 100644
@@ -6,5 +6,6 @@
 #define ASM_VENDOR_LIST_H
 
 #define SIFIVE_VENDOR_ID	0x489
+#define THEAD_VENDOR_ID		0x5b7
 
 #endif
arch/riscv/kernel/alternative.c +14 -0
index 54913857b682..e272599f96ef 100644
@@ -48,6 +48,11 @@ static void __init init_alternative(void)
 	case SIFIVE_VENDOR_ID:
 		vendor_patch_func = sifive_errata_patch_func;
 		break;
+#endif
+#ifdef CONFIG_ERRATA_THEAD
+	case THEAD_VENDOR_ID:
+		vendor_patch_func = thead_errata_patch_func;
+		break;
 #endif
 	default:
 		vendor_patch_func = NULL;
@@ -85,6 +90,15 @@ void __init apply_boot_alternatives(void)
 			    RISCV_ALTERNATIVES_BOOT);
 }
 
+void __init apply_early_boot_alternatives(void)
+{
+	init_alternative();
+
+	_apply_alternatives((struct alt_entry *)__alt_start,
+			    (struct alt_entry *)__alt_end,
+			    RISCV_ALTERNATIVES_EARLY_BOOT);
+}
+
 #ifdef CONFIG_MODULES
 void apply_module_alternatives(void *start, size_t length)
 {
arch/riscv/kernel/cpufeature.c +2 -0
index d14289fba055..4ed18981d94d 100644
@@ -224,6 +224,8 @@ static bool cpufeature_svpbmt_check_func(unsigned int stage)
 
 #if defined(CONFIG_MMU) && defined(CONFIG_64BIT)
 	switch (stage) {
+	case RISCV_ALTERNATIVES_EARLY_BOOT:
+		return false;
 	case RISCV_ALTERNATIVES_BOOT:
 		return cpufeature_svpbmt_check_fdt();
 	default:
arch/riscv/mm/init.c +2 -0
index 24b2b8044602..063d5f022a05 100644
@@ -624,6 +624,8 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 	BUG_ON((kernel_map.virt_addr + kernel_map.size) > ADDRESS_SPACE_END - SZ_4K);
 #endif
 
+	apply_early_boot_alternatives();
+
 	pt_ops.alloc_pte = alloc_pte_early;
 	pt_ops.get_pte_virt = get_pte_virt_early;
 #ifndef __PAGETABLE_PMD_FOLDED
Signature · 1 line
2.30.2
#20 lore raw
In reply to Heiko Stuebner
Quoted 2 lines · Heiko Stuebner

So this is my try at implementing svpbmt (and the diverging D1 memory types using the alternatives framework).

Please spell out what it does. While I can remember the original single letter extensions very well, the new priviliged extension naming is just letter salad.

You might also want to explain in more detail what it does and why you want to support it.