Skip to contentSkip to conversation

board without bootloader

U-Boot keerti at mrt-communication.com 2 participants 2 messages Jan 30, 2009

lore
Share & tools
lore
#0 lore raw

Dear ALL,

I have marvell 88f5182 board.
I was having the bootloader image in the flash first.
But while experimenting that image got erased,so now i dont have a bootloader in the memory,so i cannot boot the board.Is there any way to send the uboot image to the board,so that i can boot the board.

I have u-boot.bin and u-boot.hex file.

Can anyone help me to get ride of the problem.

With Regards,
Keerti

#1 lore raw

2009/1/30 <[email protected]>

Quoted 2 lines

Dear ALL,

Hi Keerti,

Quoted 7 lines

I have marvell 88f5182 board.
I was having the bootloader image in the flash first.
But while experimenting that image got erased,so now i dont have a bootloader in the memory,so i cannot boot the board.Is there any way to send the uboot image to the board,so that i can boot the board.

You will not have any other choice than using a JTAG. You can find more information here:
http://www.denx.de/wiki/view/DULG/WhereCanIFindBDI2000ConfigurationFiles

Regards,
JM