Skip to contentSkip to conversation

Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call

PATCH Superseded [email protected] 2 participants 2 messages Feb 19, 2010 1 message not in the archive

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): 8618245.137111266537413491.JavaMail.root@zimbra

#1 lore raw

PATCH 1/1 Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call

This new VT mode (VT_PROCESS_AUTO) does everything that VT_PROCESS does except that it doesn't wait for a VT_RELDISP ioctl before switching away from a VT with that mode.

If the X server eventually uses this new mode, debugging and crash recovery should become easier. This is because even when currently in the VT of a frozen X server it would still be possible to switch out by doing SysRq-r and then CTRL-<number of a text vt>, sshing in and doing chvt <number of a text vt>, or any other method of VT switching. The general concensus on #xorg-devel seems to be that it should be safe to use this with X now that we have KMS.

---
This should apply to Linus' tree. It has been compile tested only - I just want to see whether I'm on the right track/whether there's anything big I overlooked/whether there are any obvious mistakes here.

I was advised to CC Linus and akpm because of the subsystem that this touches. I hope that was appropriate.

Thanks!

 drivers/char/vt_ioctl.c |   39 ++++++++++++++++++++-------------------
 include/linux/vt.h      |    1 +
 2 files changed, 21 insertions(+), 19 deletions(-)
drivers/char/vt_ioctl.c +20 -19
index 6aa1028..87778dc 100644
@@ -888,7 +888,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 			ret = -EFAULT;
 			goto out;
 		}
-		if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS) {
+		if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS && tmp.mode != VT_PROCESS_AUTO) {
 			ret = -EINVAL;
 			goto out;
 		}
@@ -1622,7 +1622,7 @@ static void complete_change_console(struct vc_data *vc)
 	 * telling it that it has acquired. Also check if it has died and
 	 * clean up (similar to logic employed in change_console())
 	 */
-	if (vc->vt_mode.mode == VT_PROCESS) {
+	if (vc->vt_mode.mode == VT_PROCESS || vc->vt_mode.mode == VT_PROCESS_AUTO) {
 		/*
 		 * Send the signal as privileged - kill_pid() will
 		 * tell us if the process has gone or something else
@@ -1682,7 +1682,7 @@ void change_console(struct vc_data *new_vc)
 	 * vt to auto control.
 	 */
 	vc = vc_cons[fg_console].d;
-	if (vc->vt_mode.mode == VT_PROCESS) {
+	if (vc->vt_mode.mode == VT_PROCESS || vc->vt_mode.mode == VT_PROCESS_AUTO) {
 		/*
 		 * Send the signal as privileged - kill_pid() will
 		 * tell us if the process has gone or something else
@@ -1693,27 +1693,28 @@ void change_console(struct vc_data *new_vc)
 		 */
 		vc->vt_newvt = new_vc->vc_num;
 		if (kill_pid(vc->vt_pid, vc->vt_mode.relsig, 1) == 0) {
+			if(vc->vt_mode.mode == VT_PROCESS)
+				/*
+				 * It worked. Mark the vt to switch to and
+				 * return. The process needs to send us a
+				 * VT_RELDISP ioctl to complete the switch.
+				 */
+				return;
+		} else {
 			/*
-			 * It worked. Mark the vt to switch to and
-			 * return. The process needs to send us a
-			 * VT_RELDISP ioctl to complete the switch.
+			 * The controlling process has died, so we revert back to
+			 * normal operation. In this case, we'll also change back
+			 * to KD_TEXT mode. I'm not sure if this is strictly correct
+			 * but it saves the agony when the X server dies and the screen
+			 * remains blanked due to KD_GRAPHICS! It would be nice to do
+			 * this outside of VT_PROCESS but there is no single process
+			 * to account for and tracking tty count may be undesirable.
 			 */
-			return;
+			reset_vc(vc);
 		}
 
 		/*
-		 * The controlling process has died, so we revert back to
-		 * normal operation. In this case, we'll also change back
-		 * to KD_TEXT mode. I'm not sure if this is strictly correct
-		 * but it saves the agony when the X server dies and the screen
-		 * remains blanked due to KD_GRAPHICS! It would be nice to do
-		 * this outside of VT_PROCESS but there is no single process
-		 * to account for and tracking tty count may be undesirable.
-		 */
-		reset_vc(vc);
-
-		/*
-		 * Fall through to normal (VT_AUTO) handling of the switch...
+		 * Fall through to normal (VT_AUTO and VT_PROCESS_AUTO) handling of the switch...
 		 */
 	}
 
include/linux/vt.h +1 -0
index d5dd0bc..dedf419 100644
@@ -27,6 +27,7 @@ struct vt_mode {
 #define VT_SETMODE	0x5602	/* set mode of active vt */
 #define		VT_AUTO		0x00	/* auto vt switching */
 #define		VT_PROCESS	0x01	/* process controls switching */
+#define		VT_PROCESS_AUTO 0x02	/* process is notified of switching */
 #define		VT_ACKACQ	0x02	/* acknowledge switch */
 
 struct vt_stat {
Signature · 1 line
1.6.4.4
#2 lore raw
Quoted 9 lines

If the X server eventually uses this new mode, debugging and crash recovery should become easier. This is because even when currently in the VT of a frozen X server it would still be possible to switch out by doing SysRq-r and then CTRL-<number of a text vt>, sshing in and doing chvt <number of a text vt>, or any other method of VT switching. The general concensus on #xorg-devel seems to be that it should be safe to use this with X now that we have KMS.

If KMS doesn't need to mode switch then does it need any of this stuff - can it not just switch to a console and use it ? Otherwise please use a different value than ACKACQ (just for clarity) and conceptually it looks fine to me - I just question if it's really needed as KMS based X not having to play with magic locking stuff would be cleaner still.

Alan