Skip to contentSkip to conversation

2.2.19 boot failure

DISCUSSION Jorge Boncompte [DTI2] 1 participant 1 message Sep 12, 2001

lore
Share & tools
lore
#0 lore raw

Alan,

My machine is an IBM PC3xx, I don't remember what model number because
I
only have the motherboard. The machine have 128Mb Kingston memory modules, Adaptec 2940UW, Intel EtherExpress 100, Sound Blaster 64.

Do you need any more info?

-Jorge

==============================================================
Jorge Boncompte - Técnico de sistemas
DTI2 - Desarrollo de la Tecnología de las Comunicaciones
--------------------------------------------------------------
C/ Abogado Enriquez Barrios, 5 14004 CORDOBA (SPAIN)
Tlf: +34 957 761395 / FAX: +34 957 450380
--------------------------------------------------------------
[email protected] _-_-_-_-_-_-_-_-_-_-_-_-_-_ http://www.dti2.net
==============================================================
- Sin pistachos no hay Rock & Roll...
- Without wicker a basket cannot be done.
==============================================================

----- Original Message -----
From: "Alan Cox" <[email protected]>
To: "Jorge Boncompte [DTI2]" <[email protected]>
Cc: "Jens Hoefkens" <[email protected]>; "Alan Cox" <[email protected]>; <[email protected]>
Sent: Wednesday, September 12, 2001 9:21 PM
Subject: Re: 2.2.19 boot failure

Quoted 1 line
Quoted 1 line

I have recently upgraded a server, from 2.4.4 to 2.4.9, with a

M54p-=

Quoted 3 lines
Quoted 3 lines

09N
motherboard (Dual Pentium 133) and I've got the same result, with two differences, mine boots in SMP with "nomce", and I don't get any oops,

=

Quoted 10 lines
Quoted 4 lines

the
server just hangs after all that MCE reports.

Is there something that I could do to debug it?

Is your machine a compaq ?

Alan