Skip to contentSkip to conversation

matroxfb problems with dualhead G400

DISCUSSION Petr Vandrovec 3 participants 3 messages Sep 3, 2001 – Sep 4, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 8 lines · Benjamin Gilbert

I've been trying to set up dualhead text console with matroxfb and a 16MB G400, with mixed success. What I think I'm seeing is that the scrollback from the primary head, when it gets long enough (i.e., cat /boot/System.map), intrudes on the secondary head. If the secondary head is set to the same resolution and bit depth as the primary, I

Kernel is vanilla 2.4.9. Let me know what other information you need from me.

You must boot your kernel with 'video=scrollback:0'. Otherwise your kernel die sooner or later... JJ's scrollback code does not cope with more than one visible console, so you must disable it if you have more than one display in the box.
Best regards,
Petr Vandrovec [email protected]

#1 lore raw
Quoted 8 lines · You w
Quoted 1 line · Benjamin Gilbert

[ software scroll back kills on dualhead ]

You must boot your kernel with 'video=scrollback:0'. Otherwise your kernel die sooner or later... JJ's scrollback code does not cope with more than one visible console, so you must disable it if you have more than one display in the box.
Petr Vandrovec

could we somehow detect in register_framebuffer that whe're going multihead and disable software scrolling ?

I didn't look at the code so i don't know if it's feasible , just a suggestion ..

ghoz

#2 lore raw
In reply to Petr Vandrovec
Quoted 4 lines · Petr Vandrovec

You must boot your kernel with 'video=scrollback:0'. Otherwise your kernel die sooner or later... JJ's scrollback code does not cope with more than one visible console, so you must disable it if you have more than one display in the box.

That doesn't fix it. Shift-PgUp no longer works (of course), and it's not immediately oopsing on me, but I still have the same type of intrusion onto the secondary display.

--Benjamin Gilbert