Skip to contentSkip to conversation

ramdisk image for arm kernel 2.6.10

U-Boot-Users tharma at e-consystems.com 2 participants 2 messages Dec 11, 2005

lore
Share & tools
lore
#0 lore raw

I have ported the kernel image 2.6.10 amd ramdisk image . On booting the kernel i can't get the shell prompt .
bootargs = console=ttySA0 mem=64M root=/dev/mtdblock2 rw
how can i get the shell prompt ?

#1 lore raw
Quoted 4 lines · In message <[email protected]> you…

I have ported the kernel image 2.6.10 amd ramdisk image . On booting the kernel i can't get the shell prompt .
bootargs = console=ttySA0 mem=64M root=/dev/mtdblock2 rw
how can i get the shell prompt ?

Not by asking on the U-Boot mailing list, where you are 100% off topic.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There is a time in the tides of men, Which, taken at its flood, leads
on to success. On the other hand, don't count on it.   - T. K. Lawson