stm32mp: handle ck_usbo_48m clock provided by USBPHYC
Subsystems (3)
cover stm32mp: handle ck_usbo_48m clock provided by USBPHYC
Update the RCC stm32mp1 clock driver to handle the USB_PHY_48 clock provided by USBPHYC and named "ck_usbo_48m".
With this series, the clock dependencies for USB PHYC, USBOTG (including USB detection) and USBHOST are correctly managed.
See Linux kernel commit "ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151" and "phy: stm32: register usbphyc as clock provider of ck_usbo_48m clock"
Patrick
Patrick Delaunay (3):
phy: stm32-usbphyc: add counter of PLL consumer
phy: stm32-usbphyc: usbphyc is a clock provider of ck_usbo_48m clock
clk: stm32mp: handle ck_usbo_48m clock provided by USBPHYC
drivers/clk/clk_stm32mp1.c | 35 ++++---- drivers/phy/phy-stm32-usbphyc.c | 155 ++++++++++++++++++++++++++------ 2 files changed, 147 insertions(+), 43 deletions(-)
Signature · 1 line
2.25.1
PATCH 1/3 phy: stm32-usbphyc: add counter of PLL consumer
Add the counter of the PLL user n_pll_cons managed by the 2 functions stm32_usbphyc_pll_enable / stm32_usbphyc_pll_disable.
This counter allow to remove the function stm32_usbphyc_is_init and it is a preliminary step for ck_usbo_48m introduction.
---
drivers/phy/phy-stm32-usbphyc.c | 76 +++++++++++++++++++++------------ 1 file changed, 48 insertions(+), 28 deletions(-)
drivers/phy/phy-stm32-usbphyc.c +48 -28
@@ -65,6 +65,7 @@ struct stm32_usbphyc {bool init;bool powered; } phys[MAX_PHYS ]; +int n_pll_cons; }; static void stm32_usbphyc_get_pll_params(u32 clk_rate,
@@ -124,18 +125,6 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)return 0 ; } -static bool stm32_usbphyc_is_init (struct stm32_usbphyc *usbphyc) -{ -int i; - -for (i =0 ; i <MAX_PHYS ; i++) { -if (usbphyc->phys[i].init) -return true; - } - -return false; -} -static bool stm32_usbphyc_is_powered (struct stm32_usbphyc *usbphyc) {int i;
@@ -148,18 +137,17 @@ static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc)return false; } -static int stm32_usbphyc_phy_init (struct phy *phy) +static int stm32_usbphyc_pll_enable (struct stm32_usbphyc *usbphyc) { -struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); -struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;bool pllen =readl (usbphyc->base +STM32_USBPHYC_PLL ) &PLLEN ? true : false;int ret; -dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); -/* Check if one phy port has already configured the pll */ -if (pllen &&stm32_usbphyc_is_init (usbphyc)) - goto initialized; +/* Check if one consumer has already configured the pll */ +if (pllen && usbphyc->n_pll_cons) { + usbphyc->n_pll_cons++; +return 0 ; + }if (usbphyc->vdda1v1) { ret =regulator_set_enable (usbphyc->vdda1v1, true);
@@ -190,23 +178,19 @@ static int stm32_usbphyc_phy_init(struct phy *phy)if (!(readl (usbphyc->base +STM32_USBPHYC_PLL ) &PLLEN ))return -EIO ; -initialized: - usbphyc_phy->init = true; + usbphyc->n_pll_cons++;return 0 ; } -static int stm32_usbphyc_phy_exit (struct phy *phy) +static int stm32_usbphyc_pll_disable (struct stm32_usbphyc *usbphyc) { -struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); -struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;int ret; -dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); - usbphyc_phy->init = false; + usbphyc->n_pll_cons--; -/* Check if other phy port requires pllen */ -if (stm32_usbphyc_is_init (usbphyc)) +/* Check if other consumer requires pllen */ +if (usbphyc->n_pll_cons)return 0 ;clrbits_le32 (usbphyc->base +STM32_USBPHYC_PLL ,PLLEN );
@@ -235,6 +219,42 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)return 0 ; } +static int stm32_usbphyc_phy_init (struct phy *phy) +{ +struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); +struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; +int ret; + +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); +if (usbphyc_phy->init) +return 0 ; + + ret =stm32_usbphyc_pll_enable (usbphyc); +if (ret) +return log_ret (ret); + + usbphyc_phy->init = true; + +return 0 ; +} + +static int stm32_usbphyc_phy_exit (struct phy *phy) +{ +struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); +struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; +int ret; + +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); +if (!usbphyc_phy->init) +return 0 ; + + ret =stm32_usbphyc_pll_disable (usbphyc); + + usbphyc_phy->init = false; + +return log_ret (ret); +} +static int stm32_usbphyc_phy_power_on (struct phy *phy) {struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev);
Signature · 1 line
2.25.1
Re: [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer
Hi Patrick
Quoted 130 lines · Patrick Delaunay
Add the counter of the PLL user
n_pll_consmanaged by the 2 functionsstm32_usbphyc_pll_enable/stm32_usbphyc_pll_disable.This counter allow to remove the function
stm32_usbphyc_is_initand it is a preliminary step forck_usbo_48mintroduction.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/phy/phy-stm32-usbphyc.c | 76 +++++++++++++++++++++------------ 1 file changed, 48 insertions(+), 28 deletions(-)drivers/phy/phy-stm32-usbphyc.c +41
-28@@ -65,6 +65,7 @@ struct stm32_usbphyc {bool init;bool powered; } phys[MAX_PHYS ]; +int n_pll_cons; }; static void stm32_usbphyc_get_pll_params(u32 clk_rate,@@ -124,18 +125,6 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)return 0 ; } -static bool stm32_usbphyc_is_init (struct stm32_usbphyc *usbphyc) -{ -int i; - -for (i =0 ; i <MAX_PHYS ; i++) { -if (usbphyc->phys[i].init) -return true; - } - -return false; -} -static bool stm32_usbphyc_is_powered (struct stm32_usbphyc *usbphyc) {int i;@@ -148,18 +137,17 @@ static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc)return false; } -static int stm32_usbphyc_phy_init (struct phy *phy) +static int stm32_usbphyc_pll_enable (struct stm32_usbphyc *usbphyc) { -struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); -struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;bool pllen =readl (usbphyc->base +STM32_USBPHYC_PLL ) &PLLEN ? true : false;int ret; -dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); -/* Check if one phy port has already configured the pll */ -if (pllen &&stm32_usbphyc_is_init (usbphyc)) - goto initialized; +/* Check if one consumer has already configured the pll */ +if (pllen && usbphyc->n_pll_cons) { + usbphyc->n_pll_cons++; +return 0 ; + }if (usbphyc->vdda1v1) { ret =regulator_set_enable (usbphyc->vdda1v1, true);@@ -190,23 +178,19 @@ static int stm32_usbphyc_phy_init(struct phy *phy)if (!(readl (usbphyc->base +STM32_USBPHYC_PLL ) &PLLEN ))return -EIO ; -initialized: - usbphyc_phy->init = true; + usbphyc->n_pll_cons++;return 0 ; } -static int stm32_usbphyc_phy_exit (struct phy *phy) +static int stm32_usbphyc_pll_disable (struct stm32_usbphyc *usbphyc) { -struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); -struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;int ret; -dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); - usbphyc_phy->init = false; + usbphyc->n_pll_cons--; -/* Check if other phy port requires pllen */ -if (stm32_usbphyc_is_init (usbphyc)) +/* Check if other consumer requires pllen */ +if (usbphyc->n_pll_cons)return 0 ;clrbits_le32 (usbphyc->base +STM32_USBPHYC_PLL ,PLLEN );@@ -235,6 +219,42 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)return 0 ; } +static int stm32_usbphyc_phy_init (struct phy *phy) +{ +struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); +struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; +int ret; + +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); +if (usbphyc_phy->init) +return 0 ; + + ret =stm32_usbphyc_pll_enable (usbphyc); +if (ret) +return log_ret (ret); + + usbphyc_phy->init = true; + +return 0 ; +} + +static int stm32_usbphyc_phy_exit (struct phy *phy) +{ +struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); +struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; +int ret; + +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); +if (!usbphyc_phy->init) +return 0 ; +
drivers/phy/phy-stm32-usbphyc.c static int stm32_usbphyc_phy_exit(struct phy *phy) · line 260
Quoted 10 lines
drivers/phy/phy-stm32-usbphyc.c +7
-0+ ret =stm32_usbphyc_pll_disable (usbphyc); + + usbphyc_phy->init = false; + +return log_ret (ret); +} +static int stm32_usbphyc_phy_power_on (struct phy *phy) {struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev);
Thanks
Patrice
Re: [Uboot-stm32] [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer
Quoted 145 lines · Patrice CHOTARD
Hi Patrick
Quoted 130 lines · Patrick Delaunay
Add the counter of the PLL user
n_pll_consmanaged by the 2 functionsstm32_usbphyc_pll_enable/stm32_usbphyc_pll_disable.This counter allow to remove the function
stm32_usbphyc_is_initand it is a preliminary step forck_usbo_48mintroduction.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/phy/phy-stm32-usbphyc.c | 76 +++++++++++++++++++++------------ 1 file changed, 48 insertions(+), 28 deletions(-)drivers/phy/phy-stm32-usbphyc.c +41
-28@@ -65,6 +65,7 @@ struct stm32_usbphyc {bool init;bool powered; } phys[MAX_PHYS ]; +int n_pll_cons; }; static void stm32_usbphyc_get_pll_params(u32 clk_rate,@@ -124,18 +125,6 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)return 0 ; } -static bool stm32_usbphyc_is_init (struct stm32_usbphyc *usbphyc) -{ -int i; - -for (i =0 ; i <MAX_PHYS ; i++) { -if (usbphyc->phys[i].init) -return true; - } - -return false; -} -static bool stm32_usbphyc_is_powered (struct stm32_usbphyc *usbphyc) {int i;@@ -148,18 +137,17 @@ static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc)return false; } -static int stm32_usbphyc_phy_init (struct phy *phy) +static int stm32_usbphyc_pll_enable (struct stm32_usbphyc *usbphyc) { -struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); -struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;bool pllen =readl (usbphyc->base +STM32_USBPHYC_PLL ) &PLLEN ? true : false;int ret; -dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); -/* Check if one phy port has already configured the pll */ -if (pllen &&stm32_usbphyc_is_init (usbphyc)) - goto initialized; +/* Check if one consumer has already configured the pll */ +if (pllen && usbphyc->n_pll_cons) { + usbphyc->n_pll_cons++; +return 0 ; + }if (usbphyc->vdda1v1) { ret =regulator_set_enable (usbphyc->vdda1v1, true);@@ -190,23 +178,19 @@ static int stm32_usbphyc_phy_init(struct phy *phy)if (!(readl (usbphyc->base +STM32_USBPHYC_PLL ) &PLLEN ))return -EIO ; -initialized: - usbphyc_phy->init = true; + usbphyc->n_pll_cons++;return 0 ; } -static int stm32_usbphyc_phy_exit (struct phy *phy) +static int stm32_usbphyc_pll_disable (struct stm32_usbphyc *usbphyc) { -struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); -struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;int ret; -dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); - usbphyc_phy->init = false; + usbphyc->n_pll_cons--; -/* Check if other phy port requires pllen */ -if (stm32_usbphyc_is_init (usbphyc)) +/* Check if other consumer requires pllen */ +if (usbphyc->n_pll_cons)return 0 ;clrbits_le32 (usbphyc->base +STM32_USBPHYC_PLL ,PLLEN );@@ -235,6 +219,42 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)return 0 ; } +static int stm32_usbphyc_phy_init (struct phy *phy) +{ +struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); +struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; +int ret; + +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); +if (usbphyc_phy->init) +return 0 ; + + ret =stm32_usbphyc_pll_enable (usbphyc); +if (ret) +return log_ret (ret); + + usbphyc_phy->init = true; + +return 0 ; +} + +static int stm32_usbphyc_phy_exit (struct phy *phy) +{ +struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); +struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; +int ret; + +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); +if (!usbphyc_phy->init) +return 0 ; +drivers/phy/phy-stm32-usbphyc.c static int stm32_usbphyc_phy_exit(struct phy *phy) · line 260
Quoted 10 lines
drivers/phy/phy-stm32-usbphyc.c +7
-0+ ret =stm32_usbphyc_pll_disable (usbphyc); + + usbphyc_phy->init = false; + +return log_ret (ret); +} +static int stm32_usbphyc_phy_power_on (struct phy *phy) {struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev);Reviewed-by Patrice Chotard <[email protected]>
Quoted 6 lines
Thanks
Patrice
_______________________________________________
Uboot-stm32 mailing list
[email protected]
https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
Applied to u-boot-stm32
Thanks
Patrice
Re: [Uboot-stm32] [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer
Quoted 148 lines · Patrice CHOTARD
Quoted 145 lines · Patrice CHOTARD
Hi Patrick
Quoted 130 lines · Patrick Delaunay
Add the counter of the PLL user
n_pll_consmanaged by the 2 functionsstm32_usbphyc_pll_enable/stm32_usbphyc_pll_disable.This counter allow to remove the function
stm32_usbphyc_is_initand it is a preliminary step forck_usbo_48mintroduction.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/phy/phy-stm32-usbphyc.c | 76 +++++++++++++++++++++------------ 1 file changed, 48 insertions(+), 28 deletions(-)drivers/phy/phy-stm32-usbphyc.c +41
-28@@ -65,6 +65,7 @@ struct stm32_usbphyc {bool init;bool powered; } phys[MAX_PHYS ]; +int n_pll_cons; }; static void stm32_usbphyc_get_pll_params(u32 clk_rate,@@ -124,18 +125,6 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)return 0 ; } -static bool stm32_usbphyc_is_init (struct stm32_usbphyc *usbphyc) -{ -int i; - -for (i =0 ; i <MAX_PHYS ; i++) { -if (usbphyc->phys[i].init) -return true; - } - -return false; -} -static bool stm32_usbphyc_is_powered (struct stm32_usbphyc *usbphyc) {int i;@@ -148,18 +137,17 @@ static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc)return false; } -static int stm32_usbphyc_phy_init (struct phy *phy) +static int stm32_usbphyc_pll_enable (struct stm32_usbphyc *usbphyc) { -struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); -struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;bool pllen =readl (usbphyc->base +STM32_USBPHYC_PLL ) &PLLEN ? true : false;int ret; -dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); -/* Check if one phy port has already configured the pll */ -if (pllen &&stm32_usbphyc_is_init (usbphyc)) - goto initialized; +/* Check if one consumer has already configured the pll */ +if (pllen && usbphyc->n_pll_cons) { + usbphyc->n_pll_cons++; +return 0 ; + }if (usbphyc->vdda1v1) { ret =regulator_set_enable (usbphyc->vdda1v1, true);@@ -190,23 +178,19 @@ static int stm32_usbphyc_phy_init(struct phy *phy)if (!(readl (usbphyc->base +STM32_USBPHYC_PLL ) &PLLEN ))return -EIO ; -initialized: - usbphyc_phy->init = true; + usbphyc->n_pll_cons++;return 0 ; } -static int stm32_usbphyc_phy_exit (struct phy *phy) +static int stm32_usbphyc_pll_disable (struct stm32_usbphyc *usbphyc) { -struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); -struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;int ret; -dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); - usbphyc_phy->init = false; + usbphyc->n_pll_cons--; -/* Check if other phy port requires pllen */ -if (stm32_usbphyc_is_init (usbphyc)) +/* Check if other consumer requires pllen */ +if (usbphyc->n_pll_cons)return 0 ;clrbits_le32 (usbphyc->base +STM32_USBPHYC_PLL ,PLLEN );@@ -235,6 +219,42 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)return 0 ; } +static int stm32_usbphyc_phy_init (struct phy *phy) +{ +struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); +struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; +int ret; + +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); +if (usbphyc_phy->init) +return 0 ; + + ret =stm32_usbphyc_pll_enable (usbphyc); +if (ret) +return log_ret (ret); + + usbphyc_phy->init = true; + +return 0 ; +} + +static int stm32_usbphyc_phy_exit (struct phy *phy) +{ +struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); +struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; +int ret; + +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); +if (!usbphyc_phy->init) +return 0 ; +drivers/phy/phy-stm32-usbphyc.c static int stm32_usbphyc_phy_exit(struct phy *phy) · line 260
Quoted 10 lines
drivers/phy/phy-stm32-usbphyc.c +7
-0+ ret =stm32_usbphyc_pll_disable (usbphyc); + + usbphyc_phy->init = false; + +return log_ret (ret); +} +static int stm32_usbphyc_phy_power_on (struct phy *phy) {struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev);Reviewed-by Patrice Chotard <[email protected]>
Quoted 2 lines
Quoted 2 lines
Thanks
Patrice
After discussion with Patrick, the whole series will not be merged in stm32 git custodian master branch
Patrice
Quoted 12 lines
Quoted 4 lines
_______________________________________________
Uboot-stm32 mailing list
[email protected]
https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32Applied to u-boot-stm32
Thanks
Patrice
_______________________________________________
Uboot-stm32 mailing list
[email protected]
https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
Re: [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer
In reply to Patrick DelaunayQuoted 5 lines · Patrick Delaunay
Add the counter of the PLL user
n_pll_consmanaged by the 2 functionsstm32_usbphyc_pll_enable/stm32_usbphyc_pll_disable.This counter allow to remove the function
stm32_usbphyc_is_initand it is a preliminary step forck_usbo_48mintroduction.
Is it necessary to disable this clock before booting to Linux? If it isn't, then perhaps it is simpler to just not disable the clock.
--Sean
Quoted 135 lines
Signed-off-by Patrick Delaunay <[email protected]>---
drivers/phy/phy-stm32-usbphyc.c | 76 +++++++++++++++++++++------------ 1 file changed, 48 insertions(+), 28 deletions(-)drivers/phy/phy-stm32-usbphyc.c +48
-28@@ -65,6 +65,7 @@ struct stm32_usbphyc {bool init;bool powered; } phys[MAX_PHYS ]; +int n_pll_cons; }; static void stm32_usbphyc_get_pll_params(u32 clk_rate,@@ -124,18 +125,6 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)return 0 ; } -static bool stm32_usbphyc_is_init (struct stm32_usbphyc *usbphyc) -{ -int i; - -for (i =0 ; i <MAX_PHYS ; i++) { -if (usbphyc->phys[i].init) -return true; - } - -return false; -} -static bool stm32_usbphyc_is_powered (struct stm32_usbphyc *usbphyc) {int i;@@ -148,18 +137,17 @@ static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc)return false; } -static int stm32_usbphyc_phy_init (struct phy *phy) +static int stm32_usbphyc_pll_enable (struct stm32_usbphyc *usbphyc) { -struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); -struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;bool pllen =readl (usbphyc->base +STM32_USBPHYC_PLL ) &PLLEN ? true : false;int ret; -dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); -/* Check if one phy port has already configured the pll */ -if (pllen &&stm32_usbphyc_is_init (usbphyc)) - goto initialized; +/* Check if one consumer has already configured the pll */ +if (pllen && usbphyc->n_pll_cons) { + usbphyc->n_pll_cons++; +return 0 ; + }if (usbphyc->vdda1v1) { ret =regulator_set_enable (usbphyc->vdda1v1, true);@@ -190,23 +178,19 @@ static int stm32_usbphyc_phy_init(struct phy *phy)if (!(readl (usbphyc->base +STM32_USBPHYC_PLL ) &PLLEN ))return -EIO ; -initialized: - usbphyc_phy->init = true; + usbphyc->n_pll_cons++;return 0 ; } -static int stm32_usbphyc_phy_exit (struct phy *phy) +static int stm32_usbphyc_pll_disable (struct stm32_usbphyc *usbphyc) { -struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); -struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;int ret; -dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); - usbphyc_phy->init = false; + usbphyc->n_pll_cons--; -/* Check if other phy port requires pllen */ -if (stm32_usbphyc_is_init (usbphyc)) +/* Check if other consumer requires pllen */ +if (usbphyc->n_pll_cons)return 0 ;clrbits_le32 (usbphyc->base +STM32_USBPHYC_PLL ,PLLEN );@@ -235,6 +219,42 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)return 0 ; } +static int stm32_usbphyc_phy_init (struct phy *phy) +{ +struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); +struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; +int ret; + +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); +if (usbphyc_phy->init) +return 0 ; + + ret =stm32_usbphyc_pll_enable (usbphyc); +if (ret) +return log_ret (ret); + + usbphyc_phy->init = true; + +return 0 ; +} + +static int stm32_usbphyc_phy_exit (struct phy *phy) +{ +struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev); +struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; +int ret; + +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); +if (!usbphyc_phy->init) +return 0 ; + + ret =stm32_usbphyc_pll_disable (usbphyc); + + usbphyc_phy->init = false; + +return log_ret (ret); +} +static int stm32_usbphyc_phy_power_on (struct phy *phy) {struct stm32_usbphyc *usbphyc =dev_get_priv (phy->dev);
Re: [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer
Hi Sean,
Quoted 11 lines · Sean Anderson
Quoted 5 lines · Patrick Delaunay
Add the counter of the PLL user
n_pll_consmanaged by the 2 functionsstm32_usbphyc_pll_enable/stm32_usbphyc_pll_disable.This counter allow to remove the function
stm32_usbphyc_is_initand it is a preliminary step forck_usbo_48mintroduction.Is it necessary to disable this clock before booting to Linux? If it isn't, then perhaps it is simpler to just not disable the clock.
--Sean
No, it is not necessary, we only need to enable the clock for the first user.
I copy the clock behavior from kernel,
but I agree that can be simpler.
Amelie any notice about this point ?
Do you prefer that I kept the behavior - same as kernel driver - or I simplify the U-Boot driver ?
Patrick
Quoted 127 lines
Quoted 126 lines
Signed-off-by Patrick Delaunay <[email protected]>---
drivers/phy/phy-stm32-usbphyc.c| 76 +++++++++++++++++++++------------1 file changed, 48 insertions(+), 28 deletions(-)drivers/phy/phy-stm32-usbphyc.c +1
-11@@ -65,6 +65,7 @@ struct stm32_usbphyc { bool init; bool powered; } phys[MAX_PHYS]; + int n_pll_cons; }; static void stm32_usbphyc_get_pll_params(u32 clk_rate,@@ -124,18 +125,6 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) return 0; } -static bool stm32_usbphyc_is_init(struct stm32_usbphyc *usbphyc) -{ - int i; - - for (i = 0; i < MAX_PHYS; i++) { - if (usbphyc->phys[i].init) - return true; - } - - return false; -} - static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc) {int i;
drivers/phy/phy-stm32-usbphyc.c +1
-2@@ -148,18 +137,17 @@ static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc) return false; } -static int stm32_usbphyc_phy_init(struct phy *phy) +static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) { - struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev); - struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;bool pllen =
readl(usbphyc->base + STM32_USBPHYC_PLL)& PLLEN ? true : false;
int ret;
-dev_dbg(phy->dev, "phy ID = %lu\n", phy->id);
- /* Check if one phy port has already configured the pll */ - if (pllen &&stm32_usbphyc_is_init(usbphyc))
- goto initialized;
+ /* Check if one consumer has already configured the pll */ + if (pllen &&usbphyc->n_pll_cons) {
+ usbphyc->n_pll_cons++;
+ return 0;
+ }
if (usbphyc->vdda1v1) {
ret =regulator_set_enable(usbphyc->vdda1v1, true);drivers/phy/phy-stm32-usbphyc.c +0
-0@@ -190,23 +178,19 @@ static int stm32_usbphyc_phy_init(struct phy *phy) if (!(readl(usbphyc->base + STM32_USBPHYC_PLL) & PLLEN)) return -EIO;-initialized:
-usbphyc_phy->init= true;
+ usbphyc->n_pll_cons++;
return 0;
}
-static intstm32_usbphyc_phy_exit(struct phy *phy)+static intstm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc){
- structstm32_usbphyc*usbphyc =dev_get_priv(phy->dev); - structstm32_usbphyc_phy*usbphyc_phy=usbphyc->phys+phy->id; int ret;
-dev_dbg(phy->dev, "phy ID = %lu\n", phy->id);
-usbphyc_phy->init= false;
+ usbphyc->n_pll_cons--;
- /* Check if other phy port requires pllen */
- if (stm32_usbphyc_is_init(usbphyc))
+ /* Check if other consumer requires pllen */
+ if (usbphyc->n_pll_cons)
return 0;
clrbits_le32(usbphyc->base + STM32_USBPHYC_PLL, PLLEN);drivers/phy/phy-stm32-usbphyc.c +35
-0@@ -235,6 +219,42 @@ static int stm32_usbphyc_phy_exit(struct phy *phy) return 0; } +static int stm32_usbphyc_phy_init(struct phy *phy) +{ + struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev); + struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; + int ret; + + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); + if (usbphyc_phy->init) + return 0; + + ret = stm32_usbphyc_pll_enable(usbphyc); + if (ret) + return log_ret(ret); + + usbphyc_phy->init = true; + + return 0; +} + +static int stm32_usbphyc_phy_exit (struct phy *phy) +{ + struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev); + struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; + int ret; + + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); + if (!usbphyc_phy->init) + return 0; + + ret = stm32_usbphyc_pll_disable(usbphyc); + + usbphyc_phy->init = false; + + return log_ret(ret); +} + static int stm32_usbphyc_phy_power_on(struct phy *phy) { struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev);
Re: [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer
Hi Patrick,
Hi Sean,
Quoted 18 lines · Patrick DELAUNAY
Hi Sean,
Quoted 11 lines · Sean Anderson
Quoted 5 lines · Patrick Delaunay
Add the counter of the PLL user
n_pll_consmanaged by the 2 functionsstm32_usbphyc_pll_enable/stm32_usbphyc_pll_disable.This counter allow to remove the function
stm32_usbphyc_is_initand it is a preliminary step forck_usbo_48mintroduction.Is it necessary to disable this clock before booting to Linux? If it isn't, then perhaps it is simpler to just not disable the clock.
--Sean
No, it is not necessary, we only need to enable the clock for the first user.
Quoted 8 lines
I copy the clock behavior from kernel,
but I agree that can be simpler.
Amelie any notice about this point ?
Do you prefer that I kept the behavior - same as kernel driver - or I simplify the U-Boot driver ?
In case the PLL has not been disabled before Kernel boot, usbphyc Kernel driver will wait for the PLL pwerdown. USB could also not being used in Kernel, so PLL would remain enabled, and would waste power. I am rather in favor of disabling the PLL.
Regards,
Amelie
Quoted 132 lines
Patrick
Quoted 127 lines
Quoted 126 lines
Signed-off-by Patrick Delaunay <[email protected]>---
drivers/phy/phy-stm32-usbphyc.c| 76 +++++++++++++++++++++------------1 file changed, 48 insertions(+), 28 deletions(-)drivers/phy/phy-stm32-usbphyc.c +1
-11@@ -65,6 +65,7 @@ struct stm32_usbphyc { bool init; bool powered; } phys[MAX_PHYS]; + int n_pll_cons; }; static void stm32_usbphyc_get_pll_params(u32 clk_rate,@@ -124,18 +125,6 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) return 0; } -static bool stm32_usbphyc_is_init(struct stm32_usbphyc *usbphyc) -{ - int i; - - for (i = 0; i < MAX_PHYS; i++) { - if (usbphyc->phys[i].init) - return true; - } - - return false; -} - static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc) {int i;
drivers/phy/phy-stm32-usbphyc.c +1
-2@@ -148,18 +137,17 @@ static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc) return false; } -static int stm32_usbphyc_phy_init(struct phy *phy) +static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) { - struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev); - struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;bool pllen =
readl(usbphyc->base + STM32_USBPHYC_PLL)& PLLEN ? true : false;
int ret;
-dev_dbg(phy->dev, "phy ID = %lu\n", phy->id);
- /* Check if one phy port has already configured the pll */ - if (pllen &&stm32_usbphyc_is_init(usbphyc))
- goto initialized;
+ /* Check if one consumer has already configured the pll */ + if (pllen &&usbphyc->n_pll_cons) {
+ usbphyc->n_pll_cons++;
+ return 0;
+ }
if (usbphyc->vdda1v1) {
ret =regulator_set_enable(usbphyc->vdda1v1, true);drivers/phy/phy-stm32-usbphyc.c +0
-0@@ -190,23 +178,19 @@ static int stm32_usbphyc_phy_init(struct phy *phy) if (!(readl(usbphyc->base + STM32_USBPHYC_PLL) & PLLEN)) return -EIO;-initialized:
-usbphyc_phy->init= true;
+ usbphyc->n_pll_cons++;
return 0;
}
-static intstm32_usbphyc_phy_exit(struct phy *phy)+static intstm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc){
- structstm32_usbphyc*usbphyc =dev_get_priv(phy->dev); - structstm32_usbphyc_phy*usbphyc_phy=usbphyc->phys+phy->id; int ret;
-dev_dbg(phy->dev, "phy ID = %lu\n", phy->id);
-usbphyc_phy->init= false;
+ usbphyc->n_pll_cons--;
- /* Check if other phy port requires pllen */
- if (stm32_usbphyc_is_init(usbphyc))
+ /* Check if other consumer requires pllen */
+ if (usbphyc->n_pll_cons)
return 0;
clrbits_le32(usbphyc->base + STM32_USBPHYC_PLL, PLLEN);drivers/phy/phy-stm32-usbphyc.c +35
-0@@ -235,6 +219,42 @@ static int stm32_usbphyc_phy_exit(struct phy *phy) return 0; } +static int stm32_usbphyc_phy_init(struct phy *phy) +{ + struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev); + struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; + int ret; + + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); + if (usbphyc_phy->init) + return 0; + + ret = stm32_usbphyc_pll_enable(usbphyc); + if (ret) + return log_ret(ret); + + usbphyc_phy->init = true; + + return 0; +} + +static int stm32_usbphyc_phy_exit (struct phy *phy) +{ + struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev); + struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; + int ret; + + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); + if (!usbphyc_phy->init) + return 0; + + ret = stm32_usbphyc_pll_disable(usbphyc); + + usbphyc_phy->init = false; + + return log_ret(ret); +} + static int stm32_usbphyc_phy_power_on(struct phy *phy) { struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev);
Re: [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer
Quoted 27 lines · Amelie Delaunay
Hi Patrick,
Hi Sean,Quoted 23 lines · Patrick DELAUNAY
Hi Sean,
Quoted 11 lines · Sean Anderson
Quoted 5 lines · Patrick Delaunay
Add the counter of the PLL user
n_pll_consmanaged by the 2 functionsstm32_usbphyc_pll_enable/stm32_usbphyc_pll_disable.This counter allow to remove the function
stm32_usbphyc_is_initand it is a preliminary step forck_usbo_48mintroduction.Is it necessary to disable this clock before booting to Linux? If it isn't, then perhaps it is simpler to just not disable the clock.
--Sean
No, it is not necessary, we only need to enable the clock for the first user.
I copy the clock behavior from kernel,
but I agree that can be simpler.
Quoted 7 lines
Quoted 3 lines
Amelie any notice about this point ?
Do you prefer that I kept the behavior - same as kernel driver - or I simplify the U-Boot driver ?
In case the PLL has not been disabled before Kernel boot, usbphyc Kernel driver will wait for the PLL pwerdown. USB could also not being used in Kernel, so PLL would remain enabled, and would waste power. I am rather in favor of disabling the PLL.
It should be disabled if clk_ignore_unused is not in the kernel parameters, as long as Linux is also aware of the clock.
Generally, I would like to avoid refcounting if possible. Many U-Boot drivers do not disable their clocks (because they don't do any cleanup), so you can end up with the clock staying on anyway.
--Sean
Quoted 133 lines
Regards,
AmelieQuoted 130 lines
Patrick
Quoted 125 lines
Quoted 124 lines
Signed-off-by Patrick Delaunay <[email protected]>---
drivers/phy/phy-stm32-usbphyc.c| 76 +++++++++++++++++++++------------1 file changed, 48 insertions(+), 28 deletions(-)drivers/phy/phy-stm32-usbphyc.c +2
-13@@ -65,6 +65,7 @@ struct stm32_usbphyc { bool init; bool powered; } phys[MAX_PHYS]; + int n_pll_cons; }; static void stm32_usbphyc_get_pll_params(u32 clk_rate,@@ -124,18 +125,6 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) return 0; } -static bool stm32_usbphyc_is_init(struct stm32_usbphyc *usbphyc) -{ - int i; - - for (i = 0; i < MAX_PHYS; i++) { - if (usbphyc->phys[i].init) - return true; - } - - return false; -} - static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc) { int i;@@ -148,18 +137,17 @@ static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc) return false; } -static int stm32_usbphyc_phy_init(struct phy *phy) +static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) { - struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev); - struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;bool pllen =
readl(usbphyc->base + STM32_USBPHYC_PLL)& PLLEN ? true : false;
int ret;
-dev_dbg(phy->dev, "phy ID = %lu\n", phy->id);
- /* Check if one phy port has already configured the pll */ - if (pllen &&stm32_usbphyc_is_init(usbphyc))
- goto initialized;
+ /* Check if one consumer has already configured the pll */ + if (pllen &&usbphyc->n_pll_cons) {
+ usbphyc->n_pll_cons++;
+ return 0;
+ }
if (usbphyc->vdda1v1) {
ret =regulator_set_enable(usbphyc->vdda1v1, true);drivers/phy/phy-stm32-usbphyc.c +0
-0@@ -190,23 +178,19 @@ static int stm32_usbphyc_phy_init(struct phy *phy) if (!(readl(usbphyc->base + STM32_USBPHYC_PLL) & PLLEN)) return -EIO;-initialized:
-usbphyc_phy->init= true;
+ usbphyc->n_pll_cons++;
return 0;
}
-static intstm32_usbphyc_phy_exit(struct phy *phy)+static intstm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc){
- structstm32_usbphyc*usbphyc =dev_get_priv(phy->dev); - structstm32_usbphyc_phy*usbphyc_phy=usbphyc->phys+phy->id; int ret;
-dev_dbg(phy->dev, "phy ID = %lu\n", phy->id);
-usbphyc_phy->init= false;
+ usbphyc->n_pll_cons--;
- /* Check if other phy port requires pllen */
- if (stm32_usbphyc_is_init(usbphyc))
+ /* Check if other consumer requires pllen */
+ if (usbphyc->n_pll_cons)
return 0;
clrbits_le32(usbphyc->base + STM32_USBPHYC_PLL, PLLEN);drivers/phy/phy-stm32-usbphyc.c +35
-0@@ -235,6 +219,42 @@ static int stm32_usbphyc_phy_exit(struct phy *phy) return 0; } +static int stm32_usbphyc_phy_init(struct phy *phy) +{ + struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev); + struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; + int ret; + + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); + if (usbphyc_phy->init) + return 0; + + ret = stm32_usbphyc_pll_enable(usbphyc); + if (ret) + return log_ret(ret); + + usbphyc_phy->init = true; + + return 0; +} + +static int stm32_usbphyc_phy_exit (struct phy *phy) +{ + struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev); + struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; + int ret; + + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); + if (!usbphyc_phy->init) + return 0; + + ret = stm32_usbphyc_pll_disable(usbphyc); + + usbphyc_phy->init = false; + + return log_ret(ret); +} + static int stm32_usbphyc_phy_power_on(struct phy *phy) { struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev);
Re: [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer
Hi Sean,
Quoted 36 lines · Sean Anderson
Quoted 27 lines · Amelie Delaunay
Hi Patrick,
Hi Sean,Quoted 23 lines · Patrick DELAUNAY
Hi Sean,
Quoted 11 lines · Sean Anderson
Quoted 5 lines · Patrick Delaunay
Add the counter of the PLL user
n_pll_consmanaged by the 2 functionsstm32_usbphyc_pll_enable/stm32_usbphyc_pll_disable.This counter allow to remove the function
stm32_usbphyc_is_initand it is a preliminary step forck_usbo_48mintroduction.Is it necessary to disable this clock before booting to Linux? If it isn't, then perhaps it is simpler to just not disable the clock.
--Sean
No, it is not necessary, we only need to enable the clock for the first user.
I copy the clock behavior from kernel,
but I agree that can be simpler.
Quoted 7 lines
Quoted 3 lines
Amelie any notice about this point ?
Do you prefer that I kept the behavior - same as kernel driver - or I simplify the U-Boot driver ?
In case the PLL has not been disabled before Kernel boot, usbphyc Kernel driver will wait for the PLL pwerdown. USB could also not being used in Kernel, so PLL would remain enabled, and would waste power. I am rather in favor of disabling the PLL.
Quoted 18 lines
It should be disabled if
clk_ignore_unusedis not in the kernel parameters, as long as Linux is also aware of the clock.Generally, I would like to avoid refcounting if possible. Many U-Boot drivers do not disable their clocks (because they don't do any cleanup), so you can end up with the clock staying on anyway.
--Sean
Quoted 9 lines
Regards,
AmelieQuoted 6 lines
Patrick
Quoted 1 line
In general, I'm also in favor of not disabling the clock in U-Boot.
But this PLL with vdda1v1 and vdda1v8 dependency is requested for
- USBPHYC himself or
- source clock of RCC,
And we have have see many issue for this PLL initialization sequence / dependencies.
So for clock support, I only reused the existing/working function called by the PHY ops init & exit =
stm32_usbphyc_phy_init & stm32_usbphyc_phy_exit
=> the PLL and the associated VDD are already deactivated on USBPHYC exit.
And to be coherent I for the same for the clock to avoid conflict between these 2 users
(USBPHYC or RCC) as it is done also in Linux kernel.
Avoid to deactivate PLL on clock disable is a major objection or just a advice?
Regards
Patrick
.
Re: [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer
Quoted 77 lines · Patrick DELAUNAY
Hi Sean,
Quoted 36 lines · Sean Anderson
Quoted 27 lines · Amelie Delaunay
Hi Patrick,
Hi Sean,Quoted 23 lines · Patrick DELAUNAY
Hi Sean,
Quoted 11 lines · Sean Anderson
Quoted 5 lines · Patrick Delaunay
Add the counter of the PLL user
n_pll_consmanaged by the 2 functionsstm32_usbphyc_pll_enable/stm32_usbphyc_pll_disable.This counter allow to remove the function
stm32_usbphyc_is_initand it is a preliminary step forck_usbo_48mintroduction.Is it necessary to disable this clock before booting to Linux? If it isn't, then perhaps it is simpler to just not disable the clock.
--Sean
No, it is not necessary, we only need to enable the clock for the first user.
I copy the clock behavior from kernel,
but I agree that can be simpler.
Quoted 7 lines
Quoted 3 lines
Amelie any notice about this point ?
Do you prefer that I kept the behavior - same as kernel driver - or I simplify the U-Boot driver ?
In case the PLL has not been disabled before Kernel boot, usbphyc Kernel driver will wait for the PLL pwerdown. USB could also not being used in Kernel, so PLL would remain enabled, and would waste power. I am rather in favor of disabling the PLL.
Quoted 18 lines
It should be disabled if
clk_ignore_unusedis not in the kernel parameters, as long as Linux is also aware of the clock.Generally, I would like to avoid refcounting if possible. Many U-Boot drivers do not disable their clocks (because they don't do any cleanup), so you can end up with the clock staying on anyway.
--Sean
Quoted 9 lines
Regards,
AmelieQuoted 6 lines
Patrick
Quoted 1 line
In general, I'm also in favor of not disabling the clock in U-Boot.
But this PLL with vdda1v1 and vdda1v8 dependency is requested for
- USBPHYC himself or
- source clock of RCC,
And we have have see many issue for this PLL initialization sequence / dependencies.
So for clock support, I only reused the existing/working function called by the PHY ops init & exit =
stm32_usbphyc_phy_init&stm32_usbphyc_phy_exit=> the PLL and the associated VDD are already deactivated on USBPHYC exit.
Quoted 6 lines
And to be coherent I for the same for the clock to avoid conflict between these 2 users
(USBPHYC or RCC) as it is done also in Linux kernel.
Avoid to deactivate PLL on clock disable is a major objection or just a advice?
Just advice. If all of the clock's users call disable, then it is fine.
--Sean
Re: [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer
In reply to Patrick DelaunayHi,
Quoted 12 lines · Patrick Delaunay
Add the counter of the PLL user
n_pll_consmanaged by the 2 functionsstm32_usbphyc_pll_enable/stm32_usbphyc_pll_disable.This counter allow to remove the function
stm32_usbphyc_is_initand it is a preliminary step forck_usbo_48mintroduction.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/phy/phy-stm32-usbphyc.c | 76 +++++++++++++++++++++------------ 1 file changed, 48 insertions(+), 28 deletions(-)
Applied to u-boot-stm/master, thanks!
Regards
Patrick
PATCH 2/3 phy: stm32-usbphyc: usbphyc is a clock provider of ck_usbo_48m clock
In reply to Patrick Delaunayck_usbo_48m is generated by usbphyc PLL and used by OTG controller for Full-Speed use cases with dedicated Full-Speed transceiver.
ck_usbo_48m is available as soon as the PLL is enabled.
---
drivers/phy/phy-stm32-usbphyc.c | 79 +++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+)
drivers/phy/phy-stm32-usbphyc.c +79 -0
@@ -7,6 +7,7 @@#include <common.h> #include <clk.h> +#include <clk-uclass.h> #include <div64.h> #include <dm.h> #include <fdtdec.h>
@@ -17,6 +18,7 @@#include <usb.h> #include <asm/io.h> #include <dm/device_compat.h> +#include <dm/lists.h> #include <linux/bitops.h> #include <linux/delay.h> #include <power/regulator.h>
@@ -49,6 +51,9 @@#define PLL_INFF_MIN_RATE 19200000/* in Hz */ #define PLL_INFF_MAX_RATE 38400000/* in Hz */ +/* USBPHYC_CLK48 */ +#define USBPHYC_CLK48_FREQ 48000000/* in Hz */ +struct pll_params {u8 ndiv;u16 frac;
@@ -355,6 +360,16 @@ static const struct phy_ops stm32_usbphyc_phy_ops = { .of_xlate = stm32_usbphyc_of_xlate, }; +static int stm32_usbphyc_bind (struct udevice *dev) +{ +int ret; + + ret =device_bind_driver_to_node (dev,"stm32-usbphyc-clk" ,"ck_usbo_48m" , +dev_ofnode (dev),NULL ); + +return log_ret (ret); +} +static int stm32_usbphyc_probe (struct udevice *dev) {struct stm32_usbphyc *usbphyc =dev_get_priv (dev);
@@ -444,6 +459,70 @@ U_BOOT_DRIVER(stm32_usb_phyc) = { .id = UCLASS_PHY, .of_match = stm32_usbphyc_of_match, .ops = &stm32_usbphyc_phy_ops, + .bind = stm32_usbphyc_bind, .probe = stm32_usbphyc_probe, .priv_auto = sizeof(struct stm32_usbphyc), }; + +struct stm32_usbphyc_clk { +bool enable; +}; + +static ulong stm32_usbphyc_clk48_get_rate (struct clk *clk) +{ +return USBPHYC_CLK48_FREQ ; +} + +static int stm32_usbphyc_clk48_enable (struct clk *clk) +{ +struct stm32_usbphyc_clk *usbphyc_clk =dev_get_priv (clk->dev); +struct stm32_usbphyc *usbphyc; +int ret; + +if (usbphyc_clk->enable) +return 0 ; + + usbphyc =dev_get_priv (clk->dev->parent); + +/* ck_usbo_48m is generated by usbphyc PLL */ + ret =stm32_usbphyc_pll_enable (usbphyc); +if (ret) +return ret; + + usbphyc_clk->enable = true; + +return 0 ; +} + +static int stm32_usbphyc_clk48_disable (struct clk *clk) +{ +struct stm32_usbphyc_clk *usbphyc_clk =dev_get_priv (clk->dev); +struct stm32_usbphyc *usbphyc; +int ret; + +if (!usbphyc_clk->enable) +return 0 ; + + usbphyc =dev_get_priv (clk->dev->parent); + + ret =stm32_usbphyc_pll_disable (usbphyc); +if (ret) +return ret; + + usbphyc_clk->enable = false; + +return 0 ; +} + +const struct clk_ops usbphyc_clk48_ops = { + .get_rate = stm32_usbphyc_clk48_get_rate, + .enable = stm32_usbphyc_clk48_enable, + .disable = stm32_usbphyc_clk48_disable, +}; + +U_BOOT_DRIVER (stm32_usb_phyc_clk) = { + .name ="stm32-usbphyc-clk" , + .id =UCLASS_CLK , + .ops = &usbphyc_clk48_ops, + .priv_auto =sizeof (struct stm32_usbphyc_clk ), +};
Signature · 1 line
2.25.1
Re: [PATCH 2/3] phy: stm32-usbphyc: usbphyc is a clock provider of ck_usbo_48m clock
Hi Patrick
Quoted 119 lines · Patrick Delaunay
ck_usbo_48mis generated by usbphyc PLL and used by OTG controller for Full-Speed use cases with dedicated Full-Speed transceiver.
ck_usbo_48mis available as soon as the PLL is enabled.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/phy/phy-stm32-usbphyc.c | 79 +++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+)drivers/phy/phy-stm32-usbphyc.c +69
-0@@ -7,6 +7,7 @@#include <common.h> #include <clk.h> +#include <clk-uclass.h> #include <div64.h> #include <dm.h> #include <fdtdec.h> @@ -17,6 +18,7 @@#include <usb.h> #include <asm/io.h> #include <dm/device_compat.h> +#include <dm/lists.h> #include <linux/bitops.h> #include <linux/delay.h> #include <power/regulator.h> @@ -49,6 +51,9 @@#define PLL_INFF_MIN_RATE 19200000/* in Hz */ #define PLL_INFF_MAX_RATE 38400000/* in Hz */ +/* USBPHYC_CLK48 */ +#define USBPHYC_CLK48_FREQ 48000000/* in Hz */ +struct pll_params {u8 ndiv;u16 frac;@@ -355,6 +360,16 @@ static const struct phy_ops stm32_usbphyc_phy_ops = { .of_xlate = stm32_usbphyc_of_xlate, }; +static int stm32_usbphyc_bind (struct udevice *dev) +{ +int ret; + + ret =device_bind_driver_to_node (dev,"stm32-usbphyc-clk" ,"ck_usbo_48m" , +dev_ofnode (dev),NULL ); + +return log_ret (ret); +} +static int stm32_usbphyc_probe (struct udevice *dev) {struct stm32_usbphyc *usbphyc =dev_get_priv (dev);@@ -444,6 +459,70 @@ U_BOOT_DRIVER(stm32_usb_phyc) = { .id = UCLASS_PHY, .of_match = stm32_usbphyc_of_match, .ops = &stm32_usbphyc_phy_ops, + .bind = stm32_usbphyc_bind, .probe = stm32_usbphyc_probe, .priv_auto = sizeof(struct stm32_usbphyc), }; + +struct stm32_usbphyc_clk { +bool enable; +}; + +static ulong stm32_usbphyc_clk48_get_rate (struct clk *clk) +{ +return USBPHYC_CLK48_FREQ ; +} + +static int stm32_usbphyc_clk48_enable (struct clk *clk) +{ +struct stm32_usbphyc_clk *usbphyc_clk =dev_get_priv (clk->dev); +struct stm32_usbphyc *usbphyc; +int ret; + +if (usbphyc_clk->enable) +return 0 ; + + usbphyc =dev_get_priv (clk->dev->parent); + +/* ck_usbo_48m is generated by usbphyc PLL */ + ret =stm32_usbphyc_pll_enable (usbphyc); +if (ret) +return ret; + + usbphyc_clk->enable = true; + +return 0 ; +} + +static int stm32_usbphyc_clk48_disable (struct clk *clk) +{ +struct stm32_usbphyc_clk *usbphyc_clk =dev_get_priv (clk->dev); +struct stm32_usbphyc *usbphyc; +int ret; + +if (!usbphyc_clk->enable) +return 0 ; + + usbphyc =dev_get_priv (clk->dev->parent); + + ret =stm32_usbphyc_pll_disable (usbphyc); +if (ret) +return ret; + + usbphyc_clk->enable = false; + +return 0 ; +} + +const struct clk_ops usbphyc_clk48_ops = { + .get_rate = stm32_usbphyc_clk48_get_rate,
drivers/phy/phy-stm32-usbphyc.c U_BOOT_DRIVER(stm32_usb_phyc) = { · line 528
Quoted 10 lines
drivers/phy/phy-stm32-usbphyc.c +10
-0+ .enable = stm32_usbphyc_clk48_enable, + .disable = stm32_usbphyc_clk48_disable, +}; + +U_BOOT_DRIVER (stm32_usb_phyc_clk) = { + .name ="stm32-usbphyc-clk" , + .id =UCLASS_CLK , + .ops = &usbphyc_clk48_ops, + .priv_auto =sizeof (struct stm32_usbphyc_clk ), +};
Thanks
PAtrice
Re: [Uboot-stm32] [PATCH 2/3] phy: stm32-usbphyc: usbphyc is a clock provider of ck_usbo_48m clock
Quoted 136 lines · Patrice CHOTARD
Hi Patrick
Quoted 119 lines · Patrick Delaunay
ck_usbo_48mis generated by usbphyc PLL and used by OTG controller for Full-Speed use cases with dedicated Full-Speed transceiver.
ck_usbo_48mis available as soon as the PLL is enabled.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/phy/phy-stm32-usbphyc.c | 79 +++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+)drivers/phy/phy-stm32-usbphyc.c +69
-0@@ -7,6 +7,7 @@#include <common.h> #include <clk.h> +#include <clk-uclass.h> #include <div64.h> #include <dm.h> #include <fdtdec.h> @@ -17,6 +18,7 @@#include <usb.h> #include <asm/io.h> #include <dm/device_compat.h> +#include <dm/lists.h> #include <linux/bitops.h> #include <linux/delay.h> #include <power/regulator.h> @@ -49,6 +51,9 @@#define PLL_INFF_MIN_RATE 19200000/* in Hz */ #define PLL_INFF_MAX_RATE 38400000/* in Hz */ +/* USBPHYC_CLK48 */ +#define USBPHYC_CLK48_FREQ 48000000/* in Hz */ +struct pll_params {u8 ndiv;u16 frac;@@ -355,6 +360,16 @@ static const struct phy_ops stm32_usbphyc_phy_ops = { .of_xlate = stm32_usbphyc_of_xlate, }; +static int stm32_usbphyc_bind (struct udevice *dev) +{ +int ret; + + ret =device_bind_driver_to_node (dev,"stm32-usbphyc-clk" ,"ck_usbo_48m" , +dev_ofnode (dev),NULL ); + +return log_ret (ret); +} +static int stm32_usbphyc_probe (struct udevice *dev) {struct stm32_usbphyc *usbphyc =dev_get_priv (dev);@@ -444,6 +459,70 @@ U_BOOT_DRIVER(stm32_usb_phyc) = { .id = UCLASS_PHY, .of_match = stm32_usbphyc_of_match, .ops = &stm32_usbphyc_phy_ops, + .bind = stm32_usbphyc_bind, .probe = stm32_usbphyc_probe, .priv_auto = sizeof(struct stm32_usbphyc), }; + +struct stm32_usbphyc_clk { +bool enable; +}; + +static ulong stm32_usbphyc_clk48_get_rate (struct clk *clk) +{ +return USBPHYC_CLK48_FREQ ; +} + +static int stm32_usbphyc_clk48_enable (struct clk *clk) +{ +struct stm32_usbphyc_clk *usbphyc_clk =dev_get_priv (clk->dev); +struct stm32_usbphyc *usbphyc; +int ret; + +if (usbphyc_clk->enable) +return 0 ; + + usbphyc =dev_get_priv (clk->dev->parent); + +/* ck_usbo_48m is generated by usbphyc PLL */ + ret =stm32_usbphyc_pll_enable (usbphyc); +if (ret) +return ret; + + usbphyc_clk->enable = true; + +return 0 ; +} + +static int stm32_usbphyc_clk48_disable (struct clk *clk) +{ +struct stm32_usbphyc_clk *usbphyc_clk =dev_get_priv (clk->dev); +struct stm32_usbphyc *usbphyc; +int ret; + +if (!usbphyc_clk->enable) +return 0 ; + + usbphyc =dev_get_priv (clk->dev->parent); + + ret =stm32_usbphyc_pll_disable (usbphyc); +if (ret) +return ret; + + usbphyc_clk->enable = false; + +return 0 ; +} + +const struct clk_ops usbphyc_clk48_ops = { + .get_rate = stm32_usbphyc_clk48_get_rate,drivers/phy/phy-stm32-usbphyc.c U_BOOT_DRIVER(stm32_usb_phyc) = { · line 528
Quoted 10 lines
drivers/phy/phy-stm32-usbphyc.c +10
-0+ .enable = stm32_usbphyc_clk48_enable, + .disable = stm32_usbphyc_clk48_disable, +}; + +U_BOOT_DRIVER (stm32_usb_phyc_clk) = { + .name ="stm32-usbphyc-clk" , + .id =UCLASS_CLK , + .ops = &usbphyc_clk48_ops, + .priv_auto =sizeof (struct stm32_usbphyc_clk ), +};Reviewed-by Patrice Chotard <[email protected]>
Quoted 6 lines
Thanks
PAtrice
_______________________________________________
Uboot-stm32 mailing list
[email protected]
https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
Applied to u-boot-stm32
Thanks
Patrice
Re: [PATCH 2/3] phy: stm32-usbphyc: usbphyc is a clock provider of ck_usbo_48m clock
In reply to Patrick DelaunayQuoted 64 lines · Patrick Delaunay
ck_usbo_48mis generated by usbphyc PLL and used by OTG controller for Full-Speed use cases with dedicated Full-Speed transceiver.
ck_usbo_48mis available as soon as the PLL is enabled.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/phy/phy-stm32-usbphyc.c | 79 +++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+)drivers/phy/phy-stm32-usbphyc.c +16
-0@@ -7,6 +7,7 @@#include <common.h> #include <clk.h> +#include <clk-uclass.h> #include <div64.h> #include <dm.h> #include <fdtdec.h> @@ -17,6 +18,7 @@#include <usb.h> #include <asm/io.h> #include <dm/device_compat.h> +#include <dm/lists.h> #include <linux/bitops.h> #include <linux/delay.h> #include <power/regulator.h> @@ -49,6 +51,9 @@#define PLL_INFF_MIN_RATE 19200000/* in Hz */ #define PLL_INFF_MAX_RATE 38400000/* in Hz */ +/* USBPHYC_CLK48 */ +#define USBPHYC_CLK48_FREQ 48000000/* in Hz */ +struct pll_params {u8 ndiv;u16 frac;@@ -355,6 +360,16 @@ static const struct phy_ops stm32_usbphyc_phy_ops = { .of_xlate = stm32_usbphyc_of_xlate, }; +static int stm32_usbphyc_bind (struct udevice *dev) +{ +int ret; + + ret =device_bind_driver_to_node (dev,"stm32-usbphyc-clk" ,"ck_usbo_48m" , +dev_ofnode (dev),NULL ); + +return log_ret (ret); +} +static int stm32_usbphyc_probe (struct udevice *dev) {struct stm32_usbphyc *usbphyc =dev_get_priv (dev);@@ -444,6 +459,70 @@ U_BOOT_DRIVER(stm32_usb_phyc) = { .id = UCLASS_PHY, .of_match = stm32_usbphyc_of_match, .ops = &stm32_usbphyc_phy_ops, + .bind = stm32_usbphyc_bind, .probe = stm32_usbphyc_probe,
drivers/phy/phy-stm32-usbphyc.c U_BOOT_DRIVER(stm32_usb_phyc) = { · line 473
Quoted 10 lines
drivers/phy/phy-stm32-usbphyc.c +8
-0.priv_auto = sizeof(struct stm32_usbphyc), }; + +struct stm32_usbphyc_clk { +bool enable; +}; + +static ulong stm32_usbphyc_clk48_get_rate (struct clk *clk) +{ +return USBPHYC_CLK48_FREQ ;
What is the relationship between this clock and the PLL?
Quoted 46 lines
drivers/phy/phy-stm32-usbphyc.c +45
-0+} + +static int stm32_usbphyc_clk48_enable (struct clk *clk) +{ +struct stm32_usbphyc_clk *usbphyc_clk =dev_get_priv (clk->dev); +struct stm32_usbphyc *usbphyc; +int ret; + +if (usbphyc_clk->enable) +return 0 ; + + usbphyc =dev_get_priv (clk->dev->parent); + +/* ck_usbo_48m is generated by usbphyc PLL */ + ret =stm32_usbphyc_pll_enable (usbphyc); +if (ret) +return ret; + + usbphyc_clk->enable = true; + +return 0 ; +} + +static int stm32_usbphyc_clk48_disable (struct clk *clk) +{ +struct stm32_usbphyc_clk *usbphyc_clk =dev_get_priv (clk->dev); +struct stm32_usbphyc *usbphyc; +int ret; + +if (!usbphyc_clk->enable) +return 0 ; + + usbphyc =dev_get_priv (clk->dev->parent); + + ret =stm32_usbphyc_pll_disable (usbphyc); +if (ret) +return ret; + + usbphyc_clk->enable = false; + +return 0 ; +} + +const struct clk_ops usbphyc_clk48_ops = { + .get_rate = stm32_usbphyc_clk48_get_rate,
drivers/phy/phy-stm32-usbphyc.c U_BOOT_DRIVER(stm32_usb_phyc) = { · line 528
Quoted 10 lines
drivers/phy/phy-stm32-usbphyc.c +10
-0+ .enable = stm32_usbphyc_clk48_enable, + .disable = stm32_usbphyc_clk48_disable, +}; + +U_BOOT_DRIVER (stm32_usb_phyc_clk) = { + .name ="stm32-usbphyc-clk" , + .id =UCLASS_CLK , + .ops = &usbphyc_clk48_ops, + .priv_auto =sizeof (struct stm32_usbphyc_clk ), +};
I see that in the next patch you call this device from drivers/clk/clk_stm32mp1.c
Why is this clock a separate driver from the clock driver?
--Sean
Re: [PATCH 2/3] phy: stm32-usbphyc: usbphyc is a clock provider of ck_usbo_48m clock
Hi Sean
Quoted 68 lines · Sean Anderson
Quoted 67 lines · Patrick Delaunay
ck_usbo_48mis generated by usbphyc PLL and used by OTG controller for Full-Speed use cases with dedicated Full-Speed transceiver.
ck_usbo_48mis available as soon as the PLL is enabled.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/phy/phy-stm32-usbphyc.c| 79 +++++++++++++++++++++++++++++++++1 file changed, 79 insertions(+)drivers/phy/phy-stm32-usbphyc.c +2
-0@@ -7,6 +7,7 @@ #include <common.h> #include <clk.h> +#include <clk-uclass.h> #include <div64.h> #include <dm.h> #include <fdtdec.h>@@ -17,6 +18,7 @@ #include <usb.h> #include <asm/io.h> #include <dm/device_compat.h> +#include <dm/lists.h> #include <linux/bitops.h> #include <linux/delay.h> #include <power/regulator.h>@@ -49,6 +51,9 @@ #define PLL_INFF_MIN_RATE 19200000 /* in Hz */ #define PLL_INFF_MAX_RATE 38400000 /* in Hz */+/*
USBPHYC_CLK48*/drivers/phy/phy-stm32-usbphyc.c +2
-0+#define USBPHYC_CLK48_FREQ 48000000/* in Hz */ +struct
pll_params{
u8 ndiv;
u16 frac;drivers/phy/phy-stm32-usbphyc.c +9
-0@@ -355,6 +360,16 @@ static const struct phy_ops stm32_usbphyc_phy_ops = { .of_xlate = stm32_usbphyc_of_xlate, }; +static int stm32_usbphyc_bind(struct udevice *dev) +{ + int ret; + + ret = device_bind_driver_to_node(dev, "stm32-usbphyc-clk","ck_usbo_48m" , + dev_ofnode(dev), NULL); + + return log_ret(ret); +} + static int stm32_usbphyc_probe(struct udevice *dev){
structstm32_usbphyc*usbphyc =dev_get_priv(dev);drivers/phy/phy-stm32-usbphyc.c +3
-0@@ -444,6 +459,70 @@ U_BOOT_DRIVER(stm32_usb_phyc) = { .id = UCLASS_PHY, .of_match = stm32_usbphyc_of_match, .ops = &stm32_usbphyc_phy_ops, + .bind = stm32_usbphyc_bind, .probe = stm32_usbphyc_probe, .priv_auto = sizeof(struct stm32_usbphyc), }; + +struct stm32_usbphyc_clk {
Quoted 8 lines
drivers/phy/phy-stm32-usbphyc.c U_BOOT_DRIVER(stm32_usb_phyc) = { · line 473
Quoted 6 lines
drivers/phy/phy-stm32-usbphyc.c +6
-0+ bool enable; +}; + +static ulong stm32_usbphyc_clk48_get_rate (struct clk *clk) +{ + return USBPHYC_CLK48_FREQ;What is the relationship between this clock and the PLL?
The output clock of USBPHYC, running a 48MHz is only available when the USBPHYC is initialized and the PLL is enabled.
=> ck_usbo_48m is available as soon as the PLL is enabled.
see the associated code in kernel:
https://lore.kernel.org/all/[email protected]/T/
Quoted 62 lines
Quoted 49 lines
drivers/phy/phy-stm32-usbphyc.c +25
-0+} + +static int stm32_usbphyc_clk48_enable (struct clk *clk) +{ + struct stm32_usbphyc_clk *usbphyc_clk = dev_get_priv(clk->dev); + struct stm32_usbphyc *usbphyc; + int ret; + + if (usbphyc_clk->enable) + return 0; + + usbphyc = dev_get_priv(clk->dev->parent); + + /* ck_usbo_48m is generated by usbphyc PLL */ + ret = stm32_usbphyc_pll_enable(usbphyc); + if (ret) + return ret; + + usbphyc_clk->enable = true; + + return 0; +} + +static int stm32_usbphyc_clk48_disable (struct clk *clk) +{ usbphyc provides a unique clock called ck_usbo_48m.STM32 USB OTG needs a 48Mhz clock (
utmifs_clk48) for Full-Speed operation.ck_usbo_48mis a possible parent clock for USB OTG 48Mhz clock. + structstm32_usbphyc_clk*usbphyc_clk=dev_get_priv(clk->dev); + structstm32_usbphyc*usbphyc;
+ int ret;drivers/phy/phy-stm32-usbphyc.c +17
-0+ + if (!usbphyc_clk->enable) + return 0; + + usbphyc = dev_get_priv(clk->dev->parent); + + ret = stm32_usbphyc_pll_disable(usbphyc); + if (ret) + return ret; + + usbphyc_clk->enable = false; + + return 0; +} + +const struct clk_ops usbphyc_clk48_ops = { + .get_rate = stm32_usbphyc_clk48_get_rate,drivers/phy/phy-stm32-usbphyc.c U_BOOT_DRIVER(stm32_usb_phyc) = { · line 528
Quoted 10 lines
drivers/phy/phy-stm32-usbphyc.c +10
-0+ .enable = stm32_usbphyc_clk48_enable, + .disable = stm32_usbphyc_clk48_disable, +}; + +U_BOOT_DRIVER (stm32_usb_phyc_clk) = { + .name = "stm32-usbphyc-clk", + .id = UCLASS_CLK, + .ops = &usbphyc_clk48_ops, + .priv_auto = sizeof(struct stm32_usbphyc_clk), +};I see that in the next patch you call this device from
drivers/clk/clk_stm32mp1.c
Quoted 1 line
Why is this clock a separate driver from the clock driver?
The clock driver STM32MP1 = drivers/clk/clk_stm32mp1.c manage the clock in
the hardware IP RCC include in STM32MPU
=> 4 PLL and several oscillators LSI / HSI / CSI / HSE / LSE
=> manage clock source for many peripheral clock in STM32 MPU
The USBPHYC drivers manages the USB PHYC hardware block, it manage a PHY for
USB operation (device or host).
This hardware block have a internal PLL for its operation which is managed
directly by USBPHYC registers:
usbphyc provides a unique clock called ck_usbo_48m.
STM32 USB OTG needs a 48Mhz clock (utmifs_clk48) for Full-Speed operation. ck_usbo_48m is a possible parent clock for USB OTG 48Mhz clock.
This PLL is required for internal operation of USBPHYC (this PLL need to be enable
to allow USB detection for example) but also as input clock for RCC peripheral clock
USBO is "rcc_ck_usbo_48m" (see RCC_USBCKSELR.USBOSRC : USB OTG kernel clock
source selection)
So in RCC driver, we need to get the rate (it is trivial = 48MHz)
and enable the PLL when the peripheral clock USBO is required.
For this last point I prefer export a generic clock provider = CLK UCLASS than
export a specific usbphy function or duplicate USBPHYC code in RCC CLK driver.
even if the enable request on "rcc_ck_usbo_48m" is not managed in STM32MP15x
RCC driver...(stm32mp1_clk_enable don't enable the parent clock)
This patch prepares the STM32MP13x RCC driver introduction (coming soon),
based on CCF (common clock framework, ported n U-Boot):
each clock on the system is a CLK UCLASS and the dependencies are correctly
handle (each parent clock is enable when a clock is enable) but without
a CLK UCLASS for each USBO parent, a error occur during STM32MP13x CLK
driver probe (it is linked to drivers/clk/clk.c::clk_register(), with unkwon parent).
I hope that it is more clear.
Quoted 2 lines
--Sean
Patrick
Re: [PATCH 2/3] phy: stm32-usbphyc: usbphyc is a clock provider of ck_usbo_48m clock
In reply to Patrick DelaunayHi,
Quoted 11 lines · Patrick Delaunay
ck_usbo_48mis generated by usbphyc PLL and used by OTG controller for Full-Speed use cases with dedicated Full-Speed transceiver.
ck_usbo_48mis available as soon as the PLL is enabled.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/phy/phy-stm32-usbphyc.c | 79 +++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+)
Applied to u-boot-stm/master, thanks!
Regards
Patrick
PATCH 3/3 clk: stm32mp: handle ck_usbo_48m clock provided by USBPHYC
In reply to Patrick DelaunayHandle the input clock of RCC USB_PHY_48, provided by USBPHYC and named "ck_usbo_48m".
---
drivers/clk/clk_stm32mp1.c | 35 ++++++++++++++++++++--------------- 1 file changed, 20 insertions(+), 15 deletions(-)
drivers/clk/clk_stm32mp1.c +20 -15
@@ -962,6 +962,24 @@ static ulong stm32mp1_read_pll_freq(struct stm32mp1_clk_priv *priv,return dfout; } +static ulong stm32mp1_clk_get_by_name (const char *name) +{ +struct clk clk; +struct udevice *dev =NULL ; +ulong clock =0 ; + +if (!uclass_get_device_by_name (UCLASS_CLK , name, &dev)) { +if (clk_request (dev, &clk)) { +log_err ("%s request" , name); + }else { + clk.id =0 ; + clock =clk_get_rate (&clk); + } + } + +return clock; +} +static ulong stm32mp1_clk_get (struct stm32mp1_clk_priv *priv,int p) {u32 reg;
@@ -1127,24 +1145,11 @@ static ulong stm32mp1_clk_get(struct stm32mp1_clk_priv *priv, int p)break ;/* other */ case _USB_PHY_48: - clock =48000000 ; + clock =stm32mp1_clk_get_by_name ("ck_usbo_48m" );break ;case _DSI_PHY: - { -struct clk clk; -struct udevice *dev =NULL ; - -if (!uclass_get_device_by_name (UCLASS_CLK ,"ck_dsi_phy" , - &dev)) { -if (clk_request (dev, &clk)) { -log_err ("ck_dsi_phy request" ); - }else { - clk.id =0 ; - clock =clk_get_rate (&clk); - } - } + clock =stm32mp1_clk_get_by_name ("ck_dsi_phy" );break ; - }default :break ; }
Signature · 1 line
2.25.1
Re: [PATCH 3/3] clk: stm32mp: handle ck_usbo_48m clock provided by USBPHYC
Hi Patrick
Quoted 55 lines · Patrick Delaunay
Handle the input clock of RCC
USB_PHY_48, provided by USBPHYC and named "ck_usbo_48m".Signed-off-by Patrick Delaunay <[email protected]>---
drivers/clk/clk_stm32mp1.c | 35 ++++++++++++++++++++--------------- 1 file changed, 20 insertions(+), 15 deletions(-)drivers/clk/clk_stm32mp1.c +19
-10@@ -962,6 +962,24 @@ static ulong stm32mp1_read_pll_freq(struct stm32mp1_clk_priv *priv,return dfout; } +static ulong stm32mp1_clk_get_by_name (const char *name) +{ +struct clk clk; +struct udevice *dev =NULL ; +ulong clock =0 ; + +if (!uclass_get_device_by_name (UCLASS_CLK , name, &dev)) { +if (clk_request (dev, &clk)) { +log_err ("%s request" , name); + }else { + clk.id =0 ; + clock =clk_get_rate (&clk); + } + } + +return clock; +} +static ulong stm32mp1_clk_get (struct stm32mp1_clk_priv *priv,int p) {u32 reg;@@ -1127,24 +1145,11 @@ static ulong stm32mp1_clk_get(struct stm32mp1_clk_priv *priv, int p)break ;/* other */ case _USB_PHY_48: - clock =48000000 ; + clock =stm32mp1_clk_get_by_name ("ck_usbo_48m" );break ;case _DSI_PHY: - { -struct clk clk; -struct udevice *dev =NULL ; - -if (!uclass_get_device_by_name (UCLASS_CLK ,"ck_dsi_phy" , - &dev)) { -if (clk_request (dev, &clk)) { -log_err ("ck_dsi_phy request" ); - }else {
drivers/clk/clk_stm32mp1.c static ulong stm32mp1_clk_get(struct stm32mp1_clk_priv *priv, int p) · line 1155
Quoted 10 lines
drivers/clk/clk_stm32mp1.c +1
-5- clk.id =0 ; - clock =clk_get_rate (&clk); - } - } + clock =stm32mp1_clk_get_by_name ("ck_dsi_phy" );break ; - }default :break ; }
Thanks
Patrice
Re: [Uboot-stm32] [PATCH 3/3] clk: stm32mp: handle ck_usbo_48m clock provided by USBPHYC
Quoted 70 lines · Patrice CHOTARD
Hi Patrick
Quoted 55 lines · Patrick Delaunay
Handle the input clock of RCC
USB_PHY_48, provided by USBPHYC and named "ck_usbo_48m".Signed-off-by Patrick Delaunay <[email protected]>---
drivers/clk/clk_stm32mp1.c | 35 ++++++++++++++++++++--------------- 1 file changed, 20 insertions(+), 15 deletions(-)drivers/clk/clk_stm32mp1.c +19
-10@@ -962,6 +962,24 @@ static ulong stm32mp1_read_pll_freq(struct stm32mp1_clk_priv *priv,return dfout; } +static ulong stm32mp1_clk_get_by_name (const char *name) +{ +struct clk clk; +struct udevice *dev =NULL ; +ulong clock =0 ; + +if (!uclass_get_device_by_name (UCLASS_CLK , name, &dev)) { +if (clk_request (dev, &clk)) { +log_err ("%s request" , name); + }else { + clk.id =0 ; + clock =clk_get_rate (&clk); + } + } + +return clock; +} +static ulong stm32mp1_clk_get (struct stm32mp1_clk_priv *priv,int p) {u32 reg;@@ -1127,24 +1145,11 @@ static ulong stm32mp1_clk_get(struct stm32mp1_clk_priv *priv, int p)break ;/* other */ case _USB_PHY_48: - clock =48000000 ; + clock =stm32mp1_clk_get_by_name ("ck_usbo_48m" );break ;case _DSI_PHY: - { -struct clk clk; -struct udevice *dev =NULL ; - -if (!uclass_get_device_by_name (UCLASS_CLK ,"ck_dsi_phy" , - &dev)) { -if (clk_request (dev, &clk)) { -log_err ("ck_dsi_phy request" ); - }else {drivers/clk/clk_stm32mp1.c static ulong stm32mp1_clk_get(struct stm32mp1_clk_priv *priv, int p) · line 1155
Quoted 10 lines
drivers/clk/clk_stm32mp1.c +1
-5- clk.id =0 ; - clock =clk_get_rate (&clk); - } - } + clock =stm32mp1_clk_get_by_name ("ck_dsi_phy" );break ; - }default :break ; }Reviewed-by Patrice Chotard <[email protected]>
Quoted 6 lines
Thanks
Patrice
_______________________________________________
Uboot-stm32 mailing list
[email protected]
https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
Applied to u-boot-stm32
Thanks
Patrice
Re: [PATCH 3/3] clk: stm32mp: handle ck_usbo_48m clock provided by USBPHYC
In reply to Patrick DelaunayHi,
Quoted 9 lines · Patrick Delaunay
Handle the input clock of RCC
USB_PHY_48, provided by USBPHYC and named "ck_usbo_48m".Signed-off-by Patrick Delaunay <[email protected]>---
drivers/clk/clk_stm32mp1.c | 35 ++++++++++++++++++++--------------- 1 file changed, 20 insertions(+), 15 deletions(-)
Applied to u-boot-stm/master, thanks!
Regards
Patrick