IDE TCQ #4
Quoted 5 lines · Jens Axboe
Quoted 2 lines
NULL pointer ...
Could you decode that? It doesn't look like any of your drives support TCQ, it should have enabled them right here:
They were already decoded... Also others reported that - after accessing /proc/ide/ide0/hda/identify system dies... I believe that passing hand-created request to ide_raw_taskfile corrupts drive->free_req, and so subsequent drive command after this cat finds that drive->free_req.next is NULL and dies.
Quoted 14 lines
Quoted 6 lines
Uniform Multi-Platform E-IDE driver ver.:7.0.0
ide: system bus speed 33MHz
VIA Technologies, Inc. Bus Master IDE: IDE controller on PCI slot 00:07.1 VIA Technologies, Inc. Bus Master IDE: chipset revision 16
VIA Technologies, Inc. Bus Master IDE: not 100%% native mode: will probe irqs laterVP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1Quoted 7 lines
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:piohda: WDC WD1200JB-00CRA0, ATA DISK drive
hdc: TOSHIBA MK6409MAV, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide: unexpected interrupt
Quoted 3 lines
hda: tagged command queueing enabled, command queue depth 8
is missing, TCQ is not supported on this drive.
I expected that too, but I thought that unexpected interrupt may have something related with this. Strange. I'll try to find some better identify parser than my eyes.
Petr Vandrovec [email protected]