drivers: Follow the indentation coding standard on printks
Subsystems (5)
PATCH 1/1 drivers: Follow the indentation coding standard on printks
Fix indentation of printks that start at the beginning of the line. Change this for the right number of space characters, or tabs if the file uses them.
--- drivers/atm/eni.c | 2 +- drivers/atm/iphase.c | 2 +- drivers/atm/suni.c | 4 ++-- drivers/atm/zatm.c | 8 ++++---- drivers/net/ethernet/dec/tulip/de4x5.c | 2 +- drivers/net/sb1000.c | 4 ++-- drivers/parisc/iosapic.c | 4 ++-- drivers/parisc/sba_iommu.c | 2 +- 8 files changed, 14 insertions(+), 14 deletions(-)
drivers/atm/eni.c +1 -1
@@ -1456,7 +1456,7 @@ static int start_tx(struct atm_dev *dev)static void foo (void ) { -printk(KERN_INFO + printk(KERN_INFO "tx_complete=%d,dma_complete=%d,queued=%d,requeued=%d,sub=%d,\n" "backlogged=%d,rx_enqueued=%d,rx_dequeued=%d,putting=%d,pushed=%d\n", tx_complete,dma_complete,queued,requeued,submitted,backlogged,
drivers/atm/iphase.c +1 -1
@@ -1246,7 +1246,7 @@ static void rx_intr(struct atm_dev *dev) ((iadev->rx_pkt_cnt - iadev->rx_tmp_cnt) == 0)) {for (i =1 ; i <= iadev->num_rx_desc; i++)free_desc (dev, i); -printk ("Test logic RUN!!!!\n" ); +printk ("Test logic RUN!!!!\n" );writew ( ~(RX_FREEQ_EMPT |RX_EXCP_RCVD ),iadev->reass_reg+REASS_MASK_REG ); iadev->rxing =1 ; }
drivers/atm/suni.c +2 -2
@@ -328,8 +328,8 @@ static int suni_start(struct atm_dev *dev)timer_setup (&poll_timer, suni_hz,0 ); poll_timer.expires = jiffies+HZ ;#if 0 -printk (KERN_DEBUG "[u] p=0x%lx,n=0x%lx\n" ,(unsigned long ) poll_timer.list.prev, - (unsigned long ) poll_timer.list.next); +printk (KERN_DEBUG "[u] p=0x%lx,n=0x%lx\n" ,(unsigned long ) poll_timer.list.prev, + (unsigned long ) poll_timer.list.next);#endif add_timer (&poll_timer); }
drivers/atm/zatm.c +4 -4
@@ -380,7 +380,7 @@ static void poll_rx(struct atm_dev *dev,int mbx) pos = zatm_dev->mbx_start[mbx]; cells = here[0 ] & uPD98401_AAL5_SIZE;#if 0 -printk ("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n" ,here[0 ],here[1 ],here[2 ],here[3 ]); +printk ("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n" ,here[0 ],here[1 ],here[2 ],here[3 ]); {unsigned long *x; printk("POOL: 0x%08x, 0x%08x\n",zpeekl(zatm_dev,
@@ -403,14 +403,14 @@ EVENT("error code 0x%x/0x%x\n",(here[3] & uPD98401_AAL5_ES) >> skb = ((struct rx_buffer_head *)bus_to_virt (here[2 ]))->skb;__net_timestamp (skb);#if 0 -printk ("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n" ,((unsigned *) skb->data)[-3 ], +printk ("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n" ,((unsigned *) skb->data)[-3 ], ((unsigned *) skb->data)[-2 ],((unsigned *) skb->data)[-1 ], ((unsigned *) skb->data)[0 ]);#endif EVENT ("skb 0x%lx, here 0x%lx\n" ,(unsigned long ) skb, (unsigned long ) here);#if 0 -printk ("dummy: 0x%08lx, 0x%08lx\n" ,dummy[0 ],dummy[1 ]); +printk ("dummy: 0x%08lx, 0x%08lx\n" ,dummy[0 ],dummy[1 ]);#endif size = error ?0 :ntohs (((__be16 *) skb->data)[cells*ATM_CELL_PAYLOAD /sizeof (u16)-3 ]);
@@ -664,7 +664,7 @@ static int do_tx(struct sk_buff *skb)EVENT ("dsc (0x%lx)\n" ,(unsigned long ) dsc,0 ); }else { -printk ("NONONONOO!!!!\n" ); +printk ("NONONONOO!!!!\n" ); dsc =NULL ;#if 0 u32 *put;
drivers/net/ethernet/dec/tulip/de4x5.c +1 -1
@@ -3169,7 +3169,7 @@ dc2114x_autoconf(struct net_device *dev)default : lp->tcount++; -printk ("Huh?: media:%02x\n" , lp->media); +printk ("Huh?: media:%02x\n" , lp->media); lp->media =INIT ;break ; }
drivers/net/sb1000.c +2 -2
@@ -760,7 +760,7 @@ sb1000_rx(struct net_device *dev)insw (ioaddr, (unsigned short *) st,1 );#ifdef XXXDEBUG -printk ("cm0: received: %02x %02x\n" , st[0 ], st[1 ]); +printk ("cm0: received: %02x %02x\n" , st[0 ], st[1 ]);#endif /* XXXDEBUG */ lp->rx_frames++;
@@ -805,7 +805,7 @@ printk("cm0: received: %02x %02x\n", st[0], st[1]);/* get data length */ insw (ioaddr, buffer, NewDatagramHeaderSize /2 );#ifdef XXXDEBUG -printk ("cm0: IP identification: %02x%02x fragment offset: %02x%02x\n" , buffer[30 ], buffer[31 ], buffer[32 ], buffer[33 ]); +printk ("cm0: IP identification: %02x%02x fragment offset: %02x%02x\n" , buffer[30 ], buffer[31 ], buffer[32 ], buffer[33 ]);#endif /* XXXDEBUG */ if (buffer[0 ] != NewDatagramHeaderSkip) {if (sb1000_debug >1 )
drivers/parisc/iosapic.c +2 -2
@@ -633,7 +633,7 @@ static void iosapic_unmask_irq(struct irq_data *d)printk ("\n" ); } -printk ("iosapic_enable_irq(): sel " ); +printk ("iosapic_enable_irq(): sel " ); {struct iosapic_info *isp = vi->iosapic;
@@ -642,7 +642,7 @@ printk("iosapic_enable_irq(): sel "); printk(" %x", d1); } } -printk ("\n" ); +printk ("\n" );#endif /*
drivers/parisc/sba_iommu.c +1 -1
@@ -1550,7 +1550,7 @@ static void sba_hw_init(struct sba_device *sba_dev)#if 0 -printk ("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n" ,PAGE0 ->mem_boot.hpa, +printk ("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n" ,PAGE0 ->mem_boot.hpa,PAGE0 ->mem_boot.spa,PAGE0 ->mem_boot.pad,PAGE0 ->mem_boot.cl_class);/*
Signature · 1 line
2.25.1
Quoted 4 lines · Carlos Bilbao
Fix indentation of printks that start at the beginning of the line. Change this for the right number of space characters, or tabs if the file uses them.
Signed-off-by Carlos Bilbao <[email protected]>
Quoted 10 lines
--- drivers/atm/eni.c | 2 +- drivers/atm/iphase.c | 2 +- drivers/atm/suni.c | 4 ++-- drivers/atm/zatm.c | 8 ++++---- drivers/net/ethernet/dec/tulip/de4x5.c | 2 +- drivers/net/sb1000.c | 4 ++-- drivers/parisc/iosapic.c | 4 ++-- drivers/parisc/sba_iommu.c | 2 +- 8 files changed, 14 insertions(+), 14 deletions(-)
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree.
You are receiving this message because of the following common error(s) as indicated below:
- Your patch did many different things all at once, making it difficult to review. All Linux kernel patches need to only do one thing at a time. If you need to do multiple things (such as clean up all coding style issues in a file/driver), do it in a sequence of patches, each one doing only one thing. This will make it easier to review the patches to ensure that they are correct, and to help alleviate any merge issues that larger patches can cause.
If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers.
thanks,
greg k-h's patch email bot
PATCH 1/1 drivers: atm: Follow the indentation coding standard on printks
Fix indentation of printks that start at the beginning of the line. Change this for the right number of space characters, or tabs if the file uses them.
---
Changelog: Replaced printk for DPRINTK on suni.c
--- drivers/atm/eni.c | 2 +- drivers/atm/iphase.c | 2 +- drivers/atm/suni.c | 4 ++-- drivers/atm/zatm.c | 8 ++++---- 4 files changed, 8 insertions(+), 8 deletions(-)
drivers/atm/eni.c +1 -1
@@ -1456,7 +1456,7 @@ static int start_tx(struct atm_dev *dev)static void foo (void ) { -printk(KERN_INFO + printk(KERN_INFO "tx_complete=%d,dma_complete=%d,queued=%d,requeued=%d,sub=%d,\n" "backlogged=%d,rx_enqueued=%d,rx_dequeued=%d,putting=%d,pushed=%d\n", tx_complete,dma_complete,queued,requeued,submitted,backlogged,
drivers/atm/iphase.c +1 -1
@@ -1246,7 +1246,7 @@ static void rx_intr(struct atm_dev *dev) ((iadev->rx_pkt_cnt - iadev->rx_tmp_cnt) == 0)) {for (i =1 ; i <= iadev->num_rx_desc; i++)free_desc (dev, i); -printk ("Test logic RUN!!!!\n" ); +printk ("Test logic RUN!!!!\n" );writew ( ~(RX_FREEQ_EMPT |RX_EXCP_RCVD ),iadev->reass_reg+REASS_MASK_REG ); iadev->rxing =1 ; }
drivers/atm/suni.c +2 -2
@@ -328,8 +328,8 @@ static int suni_start(struct atm_dev *dev)timer_setup (&poll_timer, suni_hz,0 ); poll_timer.expires = jiffies+HZ ;#if 0 -printk (KERN_DEBUG "[u] p=0x%lx,n=0x%lx\n" ,(unsigned long ) poll_timer.list.prev, - (unsigned long ) poll_timer.list.next); +DPRINTK ("[u] p=0x%lx,n=0x%lx\n" ,(unsigned long ) poll_timer.list.prev, + (unsigned long ) poll_timer.list.next);#endif add_timer (&poll_timer); }
drivers/atm/zatm.c +4 -4
@@ -380,7 +380,7 @@ static void poll_rx(struct atm_dev *dev,int mbx) pos = zatm_dev->mbx_start[mbx]; cells = here[0 ] & uPD98401_AAL5_SIZE;#if 0 -printk ("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n" ,here[0 ],here[1 ],here[2 ],here[3 ]); +printk ("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n" ,here[0 ],here[1 ],here[2 ],here[3 ]); {unsigned long *x; printk("POOL: 0x%08x, 0x%08x\n",zpeekl(zatm_dev,
@@ -403,14 +403,14 @@ EVENT("error code 0x%x/0x%x\n",(here[3] & uPD98401_AAL5_ES) >> skb = ((struct rx_buffer_head *)bus_to_virt (here[2 ]))->skb;__net_timestamp (skb);#if 0 -printk ("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n" ,((unsigned *) skb->data)[-3 ], +printk ("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n" ,((unsigned *) skb->data)[-3 ], ((unsigned *) skb->data)[-2 ],((unsigned *) skb->data)[-1 ], ((unsigned *) skb->data)[0 ]);#endif EVENT ("skb 0x%lx, here 0x%lx\n" ,(unsigned long ) skb, (unsigned long ) here);#if 0 -printk ("dummy: 0x%08lx, 0x%08lx\n" ,dummy[0 ],dummy[1 ]); +printk ("dummy: 0x%08lx, 0x%08lx\n" ,dummy[0 ],dummy[1 ]);#endif size = error ?0 :ntohs (((__be16 *) skb->data)[cells*ATM_CELL_PAYLOAD /sizeof (u16)-3 ]);
@@ -664,7 +664,7 @@ static int do_tx(struct sk_buff *skb)EVENT ("dsc (0x%lx)\n" ,(unsigned long ) dsc,0 ); }else { -printk ("NONONONOO!!!!\n" ); +printk ("NONONONOO!!!!\n" ); dsc =NULL ;#if 0 u32 *put;
Signature · 1 line
2.25.1
Re: [PATCH] drivers: atm: Follow the indentation coding standard on printks
Quoted 18 lines · Carlos Bilbao
Fix indentation of printks that start at the beginning of the line. Change this for the right number of space characters, or tabs if the file uses them.
Signed-off-by Carlos Bilbao <[email protected]>---
Changelog: Replaced printk for DPRINTK onsuni.c--- drivers/atm/eni.c | 2 +- drivers/atm/iphase.c | 2 +- drivers/atm/suni.c | 4 ++-- drivers/atm/zatm.c | 8 ++++---- 4 files changed, 8 insertions(+), 8 deletions(-)drivers/atm/eni.c +0
-0
drivers/atm/eni.c static int start_tx(struct atm_dev *dev) · line 1462
Quoted 8 lines
drivers/atm/eni.c +1
-1@@ -1456,7 +1456,7 @@ static int start_tx(struct atm_dev *dev)static void foo (void ) { -printk(KERN_INFO + printk(KERN_INFO "tx_complete=%d,dma_complete=%d,queued=%d,requeued=%d,sub=%d,\n" "backlogged=%d,rx_enqueued=%d,rx_dequeued=%d,putting=%d,pushed=%d\n", tx_complete,dma_complete,queued,requeued,submitted,backlogged,
Did you just blindly fix the warning, or look at the surrounding code and think a bit?
There is the comment:
/* may become useful again when tuning things */
What does git log show? When was the last tuning? When was the last serious change made to this driver which was not an automated/manual cleanup? My guess is, you need to go back to at least 2005.
So maybe it is time to remove this #if 0 code?
Please also read
https://www.kernel.org/doc/Documentation/process/submitting-patches.rst
and
https://www.kernel.org/doc/html/latest/networking/netdev-FAQ.html
Andrew
Re: [PATCH] drivers: atm: Follow the indentation coding standard on printks
Hello,
Quoted 3 lines
So maybe it is time to remove this #if 0 code?
I agree Andrew. It is indeed very old code. I will just remove this #if 0 and send a new version of this patch.
thanks,
Carlos.
PATCH v2 1/1 drivers: atm: Follow the indentation coding standard on printks
Fix indentation of printks that start at the beginning of the line. Change this for the right number of space characters, or tabs if the file uses them.
---
Changelog:
- Replaced printk for DPRINTK on suni.c
- Directly removed the #if 0 printks.
---
PATCH v2 1/1 drivers: atm: Follow the indentation coding standard on printks
In reply to Andrew LunnFix indentation of printks that start at the beginning of the line. Change this for the right number of space characters, or tabs if the file uses them. Also directly remove the printks inside #if 0.
---
Changelog:
- Replaced printk for DPRINTK on suni.c
- Directly removed the #if 0 printks.
--- drivers/atm/eni.c | 23 ----------------------- drivers/atm/iphase.c | 4 ++-- drivers/atm/suni.c | 4 ---- drivers/atm/zatm.c | 22 +--------------------- 4 files changed, 3 insertions(+), 50 deletions(-)
drivers/atm/eni.c +0 -23
@@ -1448,25 +1448,6 @@ static int start_tx(struct atm_dev *dev)return 0 ; } - -/*--------------------------------- common ----------------------------------*/ - - -#if 0 /* may become useful again when tuning things */ - -static void foo (void ) -{ -printk (KERN_INFO -"tx_complete=%d,dma_complete=%d,queued=%d,requeued=%d,sub=%d,\n" -"backlogged=%d,rx_enqueued=%d,rx_dequeued=%d,putting=%d,pushed=%d\n" , - tx_complete,dma_complete,queued,requeued,submitted,backlogged, - rx_enqueued,rx_dequeued,putting,pushed); -if (eni_boards)printk (KERN_INFO "loss: %ld\n" ,ENI_DEV (eni_boards)->lost); -} - -#endif - -static void bug_int (struct atm_dev *dev,unsigned long reason) {DPRINTK (">bug_int\n" );
@@ -1509,9 +1490,6 @@ static irqreturn_t eni_int(int irq,void *dev_id)if (reason &MID_SUNI_INT ) {EVENT ("SUNI int\n" ,0 ,0 ); dev->phy->interrupt (dev); -#if 0 -foo (); -#endif }spin_lock (&eni_dev->lock); eni_dev->events |= reason;
@@ -1901,7 +1879,6 @@ static void eni_close(struct atm_vcc *vcc)kfree (ENI_VCC (vcc)); vcc->dev_data =NULL ;clear_bit (ATM_VF_ADDR ,&vcc->flags); -/*foo();*/ }
drivers/atm/iphase.c +2 -2
@@ -1246,8 +1246,8 @@ static void rx_intr(struct atm_dev *dev) ((iadev->rx_pkt_cnt - iadev->rx_tmp_cnt) == 0)) {for (i =1 ; i <= iadev->num_rx_desc; i++)free_desc (dev, i); -printk ("Test logic RUN!!!!\n" ); -writew ( ~(RX_FREEQ_EMPT |RX_EXCP_RCVD ),iadev->reass_reg+REASS_MASK_REG ); +printk ("Test logic RUN!!!!\n" ); +writew ( ~(RX_FREEQ_EMPT |RX_EXCP_RCVD ),iadev->reass_reg+REASS_MASK_REG ); iadev->rxing =1 ; } IF_EVENT(printk("Rx intr status: RX_FREEQ_EMPT %08x\n", status);)
drivers/atm/suni.c +0 -4
@@ -327,10 +327,6 @@ static int suni_start(struct atm_dev *dev)if (first) {timer_setup (&poll_timer, suni_hz,0 ); poll_timer.expires = jiffies+HZ ; -#if 0 -printk (KERN_DEBUG "[u] p=0x%lx,n=0x%lx\n" ,(unsigned long ) poll_timer.list.prev, - (unsigned long ) poll_timer.list.next); -#endif add_timer (&poll_timer); }return 0 ;
drivers/atm/zatm.c +1 -21
@@ -379,18 +379,6 @@ static void poll_rx(struct atm_dev *dev,int mbx)if (((pos +=16 ) &0xffff ) == zatm_dev->mbx_end[mbx]) pos = zatm_dev->mbx_start[mbx]; cells = here[0 ] & uPD98401_AAL5_SIZE; -#if 0 -printk ("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n" ,here[0 ],here[1 ],here[2 ],here[3 ]); -{ -unsigned long *x; -printk ("POOL: 0x%08x, 0x%08x\n" ,zpeekl (zatm_dev, - zatm_dev->pool_base), -zpeekl (zatm_dev,zatm_dev->pool_base+1 )); - x = (unsigned long *) here[2 ]; -printk ("[0..3] = 0x%08lx, 0x%08lx, 0x%08lx, 0x%08lx\n" , - x[0 ],x[1 ],x[2 ],x[3 ]); -} -#endif error =0 ;if (here[3 ] & uPD98401_AAL5_ERR) { error = (here[3] & uPD98401_AAL5_ES) >>
@@ -402,16 +390,8 @@ EVENT("error code 0x%x/0x%x\n",(here[3] & uPD98401_AAL5_ES) >> uPD98401_AAL5_ES_SHIFT,error); skb = ((struct rx_buffer_head *)bus_to_virt (here[2 ]))->skb;__net_timestamp (skb); -#if 0 -printk ("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n" ,((unsigned *) skb->data)[-3 ], - ((unsigned *) skb->data)[-2 ],((unsigned *) skb->data)[-1 ], - ((unsigned *) skb->data)[0 ]); -#endif EVENT ("skb 0x%lx, here 0x%lx\n" ,(unsigned long ) skb, (unsigned long ) here); -#if 0 -printk ("dummy: 0x%08lx, 0x%08lx\n" ,dummy[0 ],dummy[1 ]); -#endif size = error ?0 :ntohs (((__be16 *) skb->data)[cells*ATM_CELL_PAYLOAD /sizeof (u16)-3 ]);EVENT ("got skb 0x%lx, size %d\n" ,(unsigned long ) skb,size);
@@ -664,7 +644,7 @@ static int do_tx(struct sk_buff *skb)EVENT ("dsc (0x%lx)\n" ,(unsigned long ) dsc,0 ); }else { -printk ("NONONONOO!!!!\n" ); +printk ("NONONONOO!!!!\n" ); dsc =NULL ;#if 0 u32 *put;
Signature · 1 line
2.25.1
Re: [PATCH net-next v2] drivers: atm: Follow the indentation coding standard on printks
Quoted 5 lines
drivers/atm/iphase.c +0
-0
drivers/atm/iphase.c static void rx_intr(struct atm_dev *dev) · line 1252
Quoted 9 lines
drivers/atm/iphase.c +2
-2@@ -1246,8 +1246,8 @@ static void rx_intr(struct atm_dev *dev) ((iadev->rx_pkt_cnt - iadev->rx_tmp_cnt) == 0)) {for (i =1 ; i <= iadev->num_rx_desc; i++)free_desc (dev, i); -printk ("Test logic RUN!!!!\n" ); -writew ( ~(RX_FREEQ_EMPT |RX_EXCP_RCVD ),iadev->reass_reg+REASS_MASK_REG ); +printk ("Test logic RUN!!!!\n" ); +writew ( ~(RX_FREEQ_EMPT |RX_EXCP_RCVD ),iadev->reass_reg+REASS_MASK_REG ); iadev->rxing =1 ; }
It looks like you turned a set of spaces into a tab for the writew() line. Please don't make such whitespace changes in the same patch as other changes.
Yes, lots of things to learn before you get your first patch accepted...
drivers/atm/iphase.c static int do_tx(struct sk_buff *skb) · line 648
Quoted 8 lines
Quoted 1 line
+++
b/drivers/atm/zatm.cdrivers/atm/iphase.c +1
-1@@ -664,7 +644,7 @@ static int do_tx(struct sk_buff *skb)EVENT ("dsc (0x%lx)\n" ,(unsigned long ) dsc,0 ); }else { -printk ("NONONONOO!!!!\n" ); +printk ("NONONONOO!!!!\n" ); dsc =NULL ;
This seems like an error message. So maybe
pr_err("NONONONOO!!!!\n");These ATM drivers don't appear to be netdev drivers. There does not appear to be a struct device available, so you have to fall back to pr_err(), pr_info() etc.
Andrew
drivers/atm/suni.c static int suni_start(struct atm_dev *dev) · line 332
Quoted 10 lines
drivers/atm/suni.c +2
-2@@ -328,8 +328,8 @@ static int suni_start(struct atm_dev *dev)timer_setup (&poll_timer, suni_hz,0 ); poll_timer.expires = jiffies+HZ ;#if 0 -printk (KERN_DEBUG "[u] p=0x%lx,n=0x%lx\n" ,(unsigned long ) poll_timer.list.prev, - (unsigned long ) poll_timer.list.next); +printk (KERN_DEBUG "[u] p=0x%lx,n=0x%lx\n" ,(unsigned long ) poll_timer.list.prev, + (unsigned long ) poll_timer.list.next);
Why not use DPRINTK(), defined at the start of suni.c?
Andrew
Hello,
Quoted 3 lines
- Your patch did many different things all at once, making it difficult to review. All Linux kernel patches need to only do one thing at a time. If you need to do multiple things (such as clean up all coding
Greg, I am going to divide the patch in three parts, for atm/, net/ and parisc/.
Quoted 4 lines
Why not use
DPRINTK(), defined at the start ofsuni.c?Andrew
Thanks for the idea Andrew, I will make a new version of the net/ patch.
thanks,
Carlos.
Am Donnerstag, 8. Juli 2021, 15:10:01 CEST schrieb Carlos Bilbao:
Quoted 17 lines
Fix indentation of printks that start at the beginning of the line. Change this for the right number of space characters, or tabs if the file uses them.
drivers/atm/iphase.c +1
-1@@ -1246,7 +1246,7 @@ static void rx_intr(struct atm_dev *dev) ((iadev->rx_pkt_cnt - iadev->rx_tmp_cnt) == 0)) {for (i =1 ; i <= iadev->num_rx_desc; i++)free_desc (dev, i); -printk ("Test logic RUN!!!!\n" ); +printk ("Test logic RUN!!!!\n" );writew ( ~(RX_FREEQ_EMPT |RX_EXCP_RCVD ),iadev->reass_reg+REASS_MASK_REG ); iadev->rxing =1 ;
Quoted 1 line
}
This looks like leftover debug code and probably should just be deleted.
Quoted 14 lines
drivers/atm/suni.c +1
-1@@ -328,8 +328,8 @@ static int suni_start(struct atm_dev *dev)timer_setup (&poll_timer, suni_hz,0 ); poll_timer.expires = jiffies+HZ ;#if 0 -printk (KERN_DEBUG "[u] p=0x%lx,n=0x%lx\n" ,(unsigned long ) poll_timer.list.prev, - (unsigned long) poll_timer.list.next); +printk (KERN_DEBUG "[u] p=0x%lx,n=0x%lx\n" ,(unsigned long ) poll_timer.list.prev, + (unsigned long ) poll_timer.list.next);#endif add_timer (&poll_timer);
Quoted 1 line
}
This should be converted to pr_debug() and the #if 0 can be removed. Or the whole thing should likely just be removed, this looks like dead debug code.
Quoted 13 lines
drivers/atm/zatm.c +1
-1@@ -380,7 +380,7 @@ static void poll_rx(struct atm_dev *dev,int mbx) pos = zatm_dev->mbx_start[mbx]; cells = here[0 ] & uPD98401_AAL5_SIZE; #if 0 -printk ("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n" ,here[0 ],here[1 ],here[2 ],here[3 ]); + printk("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n",here[0],here[1],here[2],here[3]); { unsigned long *x;
Quoted 1 line
printk("POOL: 0x%08x, 0x%08x\n",zpeekl(zatm_dev,
This is lacking a loglevel, as well as the following prints. It should be converted to pr_debug(). The indentation of the following lines should be fixed, too.
drivers/atm/zatm.c EVENT("error code 0x%x/0x%x\n",(here[3] & · line 412
Quoted 12 lines
drivers/atm/zatm.c +1
-1@@ -403,14 +403,14 @@ EVENT("error code 0x%x/0x%x\n",(here[3] & uPD98401_AAL5_ES) >> skb = ((struct rx_buffer_head *)bus_to_virt (here[2 ]))->skb;__net_timestamp (skb);#if 0 -printk ("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n" ,((unsigned *) skb->data)[-3], + printk("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n",((unsigned *) skb->data)[-3], ((unsigned *) skb->data)[-2 ],((unsigned *) skb->data)[-1 ], ((unsigned *) skb->data)[0 ]);#endif
These as well. But this doesn't make sense, the format string says %lx, but the casts are to unsigned, so I suspect this would spit warnings if enabled.
drivers/atm/zatm.c EVENT("error code 0x%x/0x%x\n",(here[3] & uPD98401_AAL5_ES) >> · line 416
Quoted 8 lines
drivers/atm/zatm.c +1
-1EVENT ("skb 0x%lx, here 0x%lx\n" ,(unsigned long ) skb, (unsigned long ) here);#if 0 -printk ("dummy: 0x%08lx, 0x%08lx\n" ,dummy[0 ],dummy[1 ]); +printk ("dummy: 0x%08lx, 0x%08lx\n" ,dummy[0 ],dummy[1 ]);#endif
drivers/atm/zatm.c +0
-0size = error ?0 :ntohs (((__be16 *) skb->data)[cells*ATM_CELL_PAYLOAD /sizeof (u16)-3 ]);
Same here.
drivers/atm/zatm.c static int do_tx(struct sk_buff *skb) · line 670
Quoted 9 lines
drivers/atm/zatm.c +1
-1@@ -664,7 +664,7 @@ static int do_tx(struct sk_buff *skb)EVENT ("dsc (0x%lx)\n" ,(unsigned long ) dsc,0 ); }else { -printk ("NONONONOO!!!!\n" ); +printk ("NONONONOO!!!!\n" ); dsc =NULL ;#if 0 u32 *put;
And this should give something more useful, at least showing the driver name or something like that.
Quoted 6 lines
(quoted diff) +0
-0
b/drivers/net/ethernet/dec/tulip/de4x5.cindexb125d7faefdf..155cfe8800cd100644
drivers/net/ethernet/dec/tulip/de4x5.c dc2114x_autoconf(struct net_device *dev) · line 3175
Quoted 8 lines
drivers/net/ethernet/dec/tulip/de4x5.c +1
-1@@ -3169,7 +3169,7 @@ dc2114x_autoconf(struct net_device *dev)default : lp->tcount++; -printk ("Huh?: media:%02x\n" , lp->media); +printk ("Huh?: media:%02x\n" , lp->media); lp->media =INIT ;break ; }
That should be netdev_something, like netdev_dbg() or netdev_warn().
drivers/net/sb1000.c
Quoted 4 lines
drivers/net/sb1000.c +0
-0
Here as well.
Quoted 12 lines
drivers/parisc/iosapic.c +1
-1@@ -633,7 +633,7 @@ static void iosapic_unmask_irq(struct irq_data *d)printk ("\n" ); } -printk ("iosapic_enable_irq(): sel " ); +printk ("iosapic_enable_irq(): sel " ); {struct iosapic_info *isp = vi->iosapic;
drivers/parisc/iosapic.c printk("iosapic_enable_irq(): sel "); · line 648
Quoted 8 lines
drivers/parisc/iosapic.c +1
-1@@ -642,7 +642,7 @@ printk("iosapic_enable_irq(): sel "); printk(" %x", d1); } } -printk ("\n" ); +printk ("\n" );#endif /*
This is also debug code. It is basically unchanged since it has been imported into git. So it may be time to remove the whole block. Helge?
Quoted 14 lines
drivers/parisc/sba_iommu.c +1
-1@@ -1550,7 +1550,7 @@ static void sba_hw_init(struct sba_device *sba_dev)#if 0 -printk ("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n" ,PAGE0 ->mem_boot.hpa, + printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa, PAGE0->mem_boot.spa, PAGE0->mem_boot.pad, PAGE0->mem_boot.cl_class);
Quoted 1 line
/*
This is equally old. It should be either also removed, also this seems at least worth as documentation. Maybe just switch it to pr_debug() or dev_debug() while fixing the indentation.
Eike
Quoted 6 lines · On Thu, 08 Jul 2021 23:25:37 +0200 Rolf Eike Beer <[email protected]> wrote:
Am Donnerstag, 8. Juli 2021, 15:10:01 CEST schrieb Carlos Bilbao:
drivers/atm/iphase.c
Quoted 5 lines
Fix indentation of printks that start at the beginning of the line. Change this for the right number of space characters, or tabs if the file uses them.
drivers/atm/iphase.c +0
-0
Does anyone still have Linux ATM devices?
Helge Deller
maintainerQuoted 24 lines · Rolf Eike Beer
Am Donnerstag, 8. Juli 2021, 15:10:01 CEST schrieb Carlos Bilbao:
Quoted 3 lines
Fix indentation of printks that start at the beginning of the line. Change this for the right number of space characters, or tabs if the file uses them.
[...]
Quoted 19 lines
drivers/parisc/iosapic.c +2
-2@@ -633,7 +633,7 @@ static void iosapic_unmask_irq(struct irq_data *d)printk ("\n" ); } -printk ("iosapic_enable_irq(): sel " ); +printk ("iosapic_enable_irq(): sel " ); {struct iosapic_info *isp = vi->iosapic;@@ -642,7 +642,7 @@ printk("iosapic_enable_irq(): sel "); printk(" %x", d1); } } -printk ("\n" ); +printk ("\n" );#endif
Quoted 4 lines
drivers/parisc/iosapic.c printk("iosapic_enable_irq(): sel "); · line 648
Quoted 1 line
drivers/parisc/iosapic.c +0
-0/* This is also debug code. It is basically unchanged since it has been imported into git. So it may be time to remove the whole block. Helge?
I'd prefer to clean it proper up and keep it.
Quoted 14 lines
Quoted 14 lines
drivers/parisc/sba_iommu.c +1
-1@@ -1550,7 +1550,7 @@ static void sba_hw_init(struct sba_device *sba_dev)#if 0 -printk ("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n" ,PAGE0 ->mem_boot.hpa, + printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa, PAGE0->mem_boot.spa, PAGE0->mem_boot.pad, PAGE0->mem_boot.cl_class);
Quoted 5 lines
Quoted 1 line
/*
This is equally old. It should be either also removed, also this seems at least worth as documentation. Maybe just switch it to
pr_debug()ordev_debug()while fixing the indentation.
Yes, I'll clean it up too.
@Carlos:
Instead of just removing or fixing the indentation, I'll fix it for both parisc drivers. Unless you want to try...
Helge
Helge,
I would like to finish what I started and take care of this, yes.
thanks,
Carlos.
Quoted 54 lines · Helge Deller
Quoted 16 lines · Rolf Eike Beer
Am Donnerstag, 8. Juli 2021, 15:10:01 CEST schrieb Carlos Bilbao:
Quoted 3 lines
Fix indentation of printks that start at the beginning of the line. Change this for the right number of space characters, or tabs if the file uses them.
[...]
Quoted 11 lines
drivers/parisc/iosapic.c +1
-1@@ -633,7 +633,7 @@ static void iosapic_unmask_irq(struct irq_data *d)printk ("\n" ); } -printk ("iosapic_enable_irq(): sel " ); +printk ("iosapic_enable_irq(): sel " ); {struct iosapic_info *isp = vi->iosapic;@@ -642,7 +642,7 @@ printk("iosapic_enable_irq(): sel ");printk (" %x" , d1);Quoted 8 lines
drivers/parisc/iosapic.c printk("iosapic_enable_irq(): sel "); · line 648
Quoted 6 lines
drivers/parisc/iosapic.c +1
-1} } -printk ("\n" ); +printk ("\n" );#endif /* This is also debug code. It is basically unchanged since it has been imported into git. So it may be time to remove the whole block. Helge?
I'd prefer to clean it proper up and keep it.
Quoted 7 lines
Quoted 7 lines
drivers/parisc/sba_iommu.c +0
-1@@ -1550,7 +1550,7 @@ static void sba_hw_init(struct sba_device *sba_dev)#if 0 -printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n",Quoted 8 lines
drivers/parisc/sba_iommu.c static void sba_hw_init(struct sba_device *sba_dev) · line 1555
Quoted 5 lines
drivers/parisc/sba_iommu.c +1
-0PAGE0 ->mem_boot.hpa, + printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa, PAGE0->mem_boot.spa, PAGE0->mem_boot.pad, PAGE0->mem_boot.cl_class);/* This is equally old. It should be either also removed, also this seems at least worth as documentation. Maybe just switch it to
pr_debug()ordev_debug()while fixing the indentation.Yes, I'll clean it up too.
@Carlos:
Instead of just removing or fixing the indentation, I'll fix it for both parisc drivers. Unless you want to try...Helge