Skip to contentSkip to conversation

Exynos 5410 Dual cluster support

PATCH Superseded Vyacheslav Tyrtov 11 participants 27 messages Oct 14, 2013 – Nov 5, 2013 1 message not in the archive

Subsystems (7)

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v2 cover Exynos 5410 Dual cluster support

The series of patches represent support of Exynos 5410 SoC

The Exynos 5410 is the first Samsung SoC based on bigLITTLE architecture. Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same time

Patches add new platform description, support of clock controller, dual cluster support and device tree for Exynos 5410

Has been build on v3.12-rc5.
Has been tested on Exynos 5410 reference board (exynos_defconfig).

Thanks,
Vyacheslav.

Changelog:

v2:
In drivers/clk/samsung/clk-exynos5410.c
1. Clock driver converted to use preprocessor macros instead of enums. Clock IDs now defined in include/dt-bindings/clock/exynos5410.h.
2. Unused spinlock removed.
3. Function exynos5410_clk_init defined as static.
Struct exynos5410_fixed_rate_ext_clks defined as static. Struct exynos5410_mux_clks defined as static.
Struct exynos5410_div_clks defined as static.
Struct exynos5410_gate_clks defined as static.
4. Removed aliases.
5. Pll's magic register offsets defined as preprocessor macros.
6. Redundant check of device_node pointer removed.

In arch/arm/boot/dts/exynos5410.dtsi
1. dwmmcX nodes renamed to mmc.
dwmmc_X renamed to mmc_X.
dwmmc status="disabled" field added.
fifo-depth field moved from arch/arm/boot/dts/exynos5410-smdk5410.dts
2. Blank lines added where necessary.
3. cpu@ suffixes corrected.
4. edcs node removed.
5. Hexadecimal characters case corrected.
6. Clock IDs replaced with preprocessor macros.

	In arch/arm/boot/dts/exynos5410-smdk5410.dts

1. status = "okay" field added to mmc nodes.

In arch/arm/mach-exynos/edcs.c
1. "kfs_" prefix replaced with "edcs_"
2. EDCS_CPUS_PER_CLUSTER and EDCS_CLUSTERS defined instead of MCPM's values.
3. Cache handling sequence borrowed from arch/arm/mach-vexpress/tc2_pm.c
4. mcpm_sync_init() call added.
5. power management functions reworked.

Other
1. Documentation/devicetree/bindings/clock/exynos5410-clock.txt corrected.
2. Removed smdk5410_defconfig. Instead SOC_EXYNOS5410 now selects MCPM and ARM_CCI in arch/arm/mach-exynos/Kconfig.
3. edcs_status driver removed.

Tarek Dakhran (4):
ARM: EXYNOS: Add support for EXYNOS5410 SoC
clk: exynos5410: register clocks using common clock framework
ARM: EXYNOS: add Exynos Dual Cluster Support
ARM: dts: Add initial device tree support for EXYNOS5410

 .../devicetree/bindings/clock/exynos5410-clock.txt |  37 +++
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/exynos5410-smdk5410.dts          |  65 +++++
 arch/arm/boot/dts/exynos5410.dtsi                  | 209 ++++++++++++++++
 arch/arm/mach-exynos/Kconfig                       |  12 +
 arch/arm/mach-exynos/Makefile                      |   2 +
 arch/arm/mach-exynos/common.c                      |  18 ++
 arch/arm/mach-exynos/edcs.c                        | 270 +++++++++++++++++++++
 arch/arm/mach-exynos/include/mach/map.h            |   1 +
 arch/arm/mach-exynos/mach-exynos5-dt.c             |   1 +
 arch/arm/plat-samsung/include/plat/cpu.h           |   8 +
 drivers/clk/samsung/Makefile                       |   1 +
 drivers/clk/samsung/clk-exynos5410.c               | 251 +++++++++++++++++++
 include/dt-bindings/clock/exynos5410.h             | 175 +++++++++++++
 14 files changed, 1051 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/exynos5410-clock.txt
 create mode 100644 arch/arm/boot/dts/exynos5410-smdk5410.dts
 create mode 100644 arch/arm/boot/dts/exynos5410.dtsi
 create mode 100644 arch/arm/mach-exynos/edcs.c
 create mode 100644 drivers/clk/samsung/clk-exynos5410.c
 create mode 100644 include/dt-bindings/clock/exynos5410.h
Signature · 1 line
1.8.1.5
#1 lore raw

PATCH v2 1/4 ARM: EXYNOS: Add support for EXYNOS5410 SoC

From: Tarek Dakhran <[email protected]>

EXYNOS5410 is SoC in Samsung's Exynos5 SoC series. Add initial support for this SoC.

---
 arch/arm/mach-exynos/Kconfig             | 12 ++++++++++++
 arch/arm/mach-exynos/common.c            | 18 ++++++++++++++++++
 arch/arm/mach-exynos/include/mach/map.h  |  1 +
 arch/arm/mach-exynos/mach-exynos5-dt.c   |  1 +
 arch/arm/plat-samsung/include/plat/cpu.h |  8 ++++++++
 5 files changed, 40 insertions(+)
arch/arm/mach-exynos/Kconfig +12 -0
index 56fe819..9ea1799 100644
@@ -84,6 +84,18 @@ config SOC_EXYNOS5250
 	help
 	  Enable EXYNOS5250 SoC support
 
+config SOC_EXYNOS5410
+	bool "SAMSUNG EXYNOS5410"
+	default y
+	depends on ARCH_EXYNOS5
+	select MCPM
+	select ARM_CCI
+	select PM_GENERIC_DOMAINS if PM
+	select S5P_PM if PM
+	select S5P_SLEEP if PM
+	help
+	  Enable EXYNOS5410 SoC support
+
 config SOC_EXYNOS5420
 	bool "SAMSUNG EXYNOS5420"
 	default y
arch/arm/mach-exynos/common.c +18 -0
index ba95e5d..187c0a4 100644
@@ -53,6 +53,7 @@ static const char name_exynos4210[] = "EXYNOS4210";
 static const char name_exynos4212[] = "EXYNOS4212";
 static const char name_exynos4412[] = "EXYNOS4412";
 static const char name_exynos5250[] = "EXYNOS5250";
+static const char name_exynos5410[] = "EXYNOS5410";
 static const char name_exynos5420[] = "EXYNOS5420";
 static const char name_exynos5440[] = "EXYNOS5440";
 
@@ -86,6 +87,12 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init		= exynos_init,
 		.name		= name_exynos5250,
 	}, {
+		.idcode		= EXYNOS5410_SOC_ID,
+		.idmask		= EXYNOS5_SOC_MASK,
+		.map_io		= exynos5_map_io,
+		.init		= exynos_init,
+		.name		= name_exynos5410,
+	}, {
 		.idcode		= EXYNOS5420_SOC_ID,
 		.idmask		= EXYNOS5_SOC_MASK,
 		.map_io		= exynos5_map_io,
@@ -216,6 +223,15 @@ static struct map_desc exynos4x12_iodesc[] __initdata = {
 	},
 };
 
+static struct map_desc exynos5410_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM_NS,
+		.pfn		= __phys_to_pfn(EXYNOS5410_PA_SYSRAM_NS),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
 static struct map_desc exynos5250_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S5P_VA_SYSRAM_NS,
@@ -365,6 +381,8 @@ static void __init exynos5_map_io(void)
 
 	if (soc_is_exynos5250())
 		iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
+	if (soc_is_exynos5410())
+		iotable_init(exynos5410_iodesc, ARRAY_SIZE(exynos5410_iodesc));
 }
 
 void __init exynos_init_time(void)
arch/arm/mach-exynos/include/mach/map.h +1 -0
index 7b046b5..894f431 100644
@@ -29,6 +29,7 @@
 #define EXYNOS4210_PA_SYSRAM_NS		0x0203F000
 #define EXYNOS4x12_PA_SYSRAM_NS		0x0204F000
 #define EXYNOS5250_PA_SYSRAM_NS		0x0204F000
+#define EXYNOS5410_PA_SYSRAM_NS		0x02073000
 
 #define EXYNOS_PA_CHIPID		0x10000000
 
arch/arm/mach-exynos/mach-exynos5-dt.c +1 -0
index f874b77..9515186 100644
@@ -52,6 +52,7 @@ static void __init exynos5_dt_machine_init(void)
 
 static char const *exynos5_dt_compat[] __initdata = {
 	"samsung,exynos5250",
+	"samsung,exynos5410",
 	"samsung,exynos5420",
 	"samsung,exynos5440",
 	NULL
arch/arm/plat-samsung/include/plat/cpu.h +8 -0
index 4fb1f03..aad7c40 100644
@@ -46,6 +46,7 @@ extern unsigned long samsung_cpu_id;
 #define EXYNOS4_CPU_MASK	0xFFFE0000
 
 #define EXYNOS5250_SOC_ID	0x43520000
+#define EXYNOS5410_SOC_ID	0xE5410023
 #define EXYNOS5420_SOC_ID	0xE5420000
 #define EXYNOS5440_SOC_ID	0xE5440000
 #define EXYNOS5_SOC_MASK	0xFFFFF000
@@ -68,6 +69,7 @@ IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
 IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
 IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 
@@ -144,6 +146,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_exynos5250()	0
 #endif
 
+#if defined(CONFIG_SOC_EXYNOS5410)
+# define soc_is_exynos5410()	is_samsung_exynos5410()
+#else
+# define soc_is_exynos5410()	0
+#endif
+
 #if defined(CONFIG_SOC_EXYNOS5420)
 # define soc_is_exynos5420()	is_samsung_exynos5420()
 #else
Signature · 1 line
1.8.1.5
Reviewed-by on v2 1/4
#2 lore raw

Re: [PATCH v2 1/4] ARM: EXYNOS: Add support for EXYNOS5410 SoC

Quoted 7 lines · On Monday 14 of October 2013 19:08:22 Vyacheslav Tyrtov wrote:

From: Tarek Dakhran <[email protected]>

EXYNOS5410 is SoC in Samsung's Exynos5 SoC series. Add initial support for this SoC.

Quoted 7 lines
---
 arch/arm/mach-exynos/Kconfig             | 12 ++++++++++++
 arch/arm/mach-exynos/common.c            | 18 ++++++++++++++++++
 arch/arm/mach-exynos/include/mach/map.h  |  1 +
 arch/arm/mach-exynos/mach-exynos5-dt.c   |  1 +
 arch/arm/plat-samsung/include/plat/cpu.h |  8 ++++++++
 5 files changed, 40 insertions(+)

Best regards,
Tomasz

#3 lore raw

Re: [PATCH v2 1/4] ARM: EXYNOS: Add support for EXYNOS5410 SoC

In reply to Vyacheslav Tyrtov
Quoted 4 lines · Vyacheslav Tyrtov

From: Tarek Dakhran <[email protected]>

EXYNOS5410 is SoC in Samsung's Exynos5 SoC series. Add initial support for this SoC.

I think this entire patch is mostly unnecessary and this information should all be coming from DT. I'll leave it to arm-soc maintainers whether they want to accept this addition rather than see some clean-up here.

"samsung,exynos5410" does need to be documented though.

Rob

Quoted 141 lines
---
 arch/arm/mach-exynos/Kconfig             | 12 ++++++++++++
 arch/arm/mach-exynos/common.c            | 18 ++++++++++++++++++
 arch/arm/mach-exynos/include/mach/map.h  |  1 +
 arch/arm/mach-exynos/mach-exynos5-dt.c   |  1 +
 arch/arm/plat-samsung/include/plat/cpu.h |  8 ++++++++
 5 files changed, 40 insertions(+)
arch/arm/mach-exynos/Kconfig +12 -0
index 56fe819..9ea1799 100644
@@ -84,6 +84,18 @@ config SOC_EXYNOS5250
 	help
 	  Enable EXYNOS5250 SoC support
 
+config SOC_EXYNOS5410
+	bool "SAMSUNG EXYNOS5410"
+	default y
+	depends on ARCH_EXYNOS5
+	select MCPM
+	select ARM_CCI
+	select PM_GENERIC_DOMAINS if PM
+	select S5P_PM if PM
+	select S5P_SLEEP if PM
+	help
+	  Enable EXYNOS5410 SoC support
+
 config SOC_EXYNOS5420
 	bool "SAMSUNG EXYNOS5420"
 	default y
arch/arm/mach-exynos/common.c +18 -0
index ba95e5d..187c0a4 100644
@@ -53,6 +53,7 @@ static const char name_exynos4210[] = "EXYNOS4210";
 static const char name_exynos4212[] = "EXYNOS4212";
 static const char name_exynos4412[] = "EXYNOS4412";
 static const char name_exynos5250[] = "EXYNOS5250";
+static const char name_exynos5410[] = "EXYNOS5410";
 static const char name_exynos5420[] = "EXYNOS5420";
 static const char name_exynos5440[] = "EXYNOS5440";
 
@@ -86,6 +87,12 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init		= exynos_init,
 		.name		= name_exynos5250,
 	}, {
+		.idcode		= EXYNOS5410_SOC_ID,
+		.idmask		= EXYNOS5_SOC_MASK,
+		.map_io		= exynos5_map_io,
+		.init		= exynos_init,
+		.name		= name_exynos5410,
+	}, {
 		.idcode		= EXYNOS5420_SOC_ID,
 		.idmask		= EXYNOS5_SOC_MASK,
 		.map_io		= exynos5_map_io,
@@ -216,6 +223,15 @@ static struct map_desc exynos4x12_iodesc[] __initdata = {
 	},
 };
 
+static struct map_desc exynos5410_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM_NS,
+		.pfn		= __phys_to_pfn(EXYNOS5410_PA_SYSRAM_NS),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
 static struct map_desc exynos5250_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S5P_VA_SYSRAM_NS,
@@ -365,6 +381,8 @@ static void __init exynos5_map_io(void)
 
 	if (soc_is_exynos5250())
 		iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
+	if (soc_is_exynos5410())
+		iotable_init(exynos5410_iodesc, ARRAY_SIZE(exynos5410_iodesc));
 }
 
 void __init exynos_init_time(void)
arch/arm/mach-exynos/include/mach/map.h +1 -0
index 7b046b5..894f431 100644
@@ -29,6 +29,7 @@
 #define EXYNOS4210_PA_SYSRAM_NS		0x0203F000
 #define EXYNOS4x12_PA_SYSRAM_NS		0x0204F000
 #define EXYNOS5250_PA_SYSRAM_NS		0x0204F000
+#define EXYNOS5410_PA_SYSRAM_NS		0x02073000
 
 #define EXYNOS_PA_CHIPID		0x10000000
 
arch/arm/mach-exynos/mach-exynos5-dt.c +1 -0
index f874b77..9515186 100644
@@ -52,6 +52,7 @@ static void __init exynos5_dt_machine_init(void)
 
 static char const *exynos5_dt_compat[] __initdata = {
 	"samsung,exynos5250",
+	"samsung,exynos5410",
 	"samsung,exynos5420",
 	"samsung,exynos5440",
 	NULL
arch/arm/plat-samsung/include/plat/cpu.h +8 -0
index 4fb1f03..aad7c40 100644
@@ -46,6 +46,7 @@ extern unsigned long samsung_cpu_id;
 #define EXYNOS4_CPU_MASK	0xFFFE0000
 
 #define EXYNOS5250_SOC_ID	0x43520000
+#define EXYNOS5410_SOC_ID	0xE5410023
 #define EXYNOS5420_SOC_ID	0xE5420000
 #define EXYNOS5440_SOC_ID	0xE5440000
 #define EXYNOS5_SOC_MASK	0xFFFFF000
@@ -68,6 +69,7 @@ IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
 IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
 IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 
@@ -144,6 +146,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_exynos5250()	0
 #endif
 
+#if defined(CONFIG_SOC_EXYNOS5410)
+# define soc_is_exynos5410()	is_samsung_exynos5410()
+#else
+# define soc_is_exynos5410()	0
+#endif
+
 #if defined(CONFIG_SOC_EXYNOS5420)
 # define soc_is_exynos5420()	is_samsung_exynos5420()
 #else
#4 lore raw

Re: [PATCH v2 1/4] ARM: EXYNOS: Add support for EXYNOS5410 SoC

Hi Rob,

Quoted 10 lines · On Friday 01 of November 2013 16:52:44 Rob Herring wrote:
Quoted 4 lines · Vyacheslav Tyrtov

From: Tarek Dakhran <[email protected]>

EXYNOS5410 is SoC in Samsung's Exynos5 SoC series. Add initial support for this SoC.

I think this entire patch is mostly unnecessary and this information should all be coming from DT. I'll leave it to arm-soc maintainers whether they want to accept this addition rather than see some clean-up here.

The clean-up here is already in plans, but this is much more than can be seen just from this patch, so it needs some time.

Quoted 2 lines

"samsung,exynos5410" does need to be documented though.

Right.

Best regards,
Tomasz

#5 lore raw

PATCH v2 2/4 clk: exynos5410: register clocks using common clock framework

In reply to Vyacheslav Tyrtov

From: Tarek Dakhran <[email protected]>

The EXYNOS5410 clocks are statically listed and registered using the Samsung specific common clock helper functions.

---
 .../devicetree/bindings/clock/exynos5410-clock.txt |  37 +++
 drivers/clk/samsung/Makefile                       |   1 +
 drivers/clk/samsung/clk-exynos5410.c               | 251 +++++++++++++++++++++
 include/dt-bindings/clock/exynos5410.h             | 175 ++++++++++++++
 4 files changed, 464 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/exynos5410-clock.txt
 create mode 100644 drivers/clk/samsung/clk-exynos5410.c
 create mode 100644 include/dt-bindings/clock/exynos5410.h
Documentation/devicetree/bindings/clock/exynos5410-clock.txt new file +37 -0
new file mode 100644
index 0000000..a462da231
@@ -0,0 +1,37 @@
+* Samsung Exynos5410 Clock Controller
+
+The Exynos5410 clock controller generates and supplies clock to various
+controllers within the Exynos5410 SoC.
+
+Required Properties:
+
+- compatible: should be "samsung,exynos5410-clock"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5410.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock: clock-controller at 0x10010000 {
+		compatible = "samsung,exynos5410-clock";
+		reg = <0x10010000 0x30000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial at 12C20000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C00000 0x100>;
+		interrupts = <0 51 0>;
+		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
drivers/clk/samsung/Makefile +1 -0
index 3413380..5a446ca 100644
@@ -5,6 +5,7 @@
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-pll.o
 obj-$(CONFIG_ARCH_EXYNOS4)	+= clk-exynos4.o
 obj-$(CONFIG_SOC_EXYNOS5250)	+= clk-exynos5250.o
+obj-$(CONFIG_SOC_EXYNOS5410)	+= clk-exynos5410.o
 obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
drivers/clk/samsung/clk-exynos5410.c new file +251 -0

251 lines not on this page · raw message

include/dt-bindings/clock/exynos5410.h new file +175 -0

175 lines not on this page · raw message

Signature · 1 line
1.8.1.5
#6 lore raw

Re: [PATCH v2 2/4] clk: exynos5410: register clocks using common clock framework

Quoting Vyacheslav Tyrtov (2013-10-14 08:08:23)

Quoted 7 lines

From: Tarek Dakhran <[email protected]>

The EXYNOS5410 clocks are statically listed and registered using the Samsung specific common clock helper functions.

Looks good to me. Any objections for me to take this through the clk tree?

Regards,
Mike

Quoted 505 lines
---
 .../devicetree/bindings/clock/exynos5410-clock.txt |  37 +++
 drivers/clk/samsung/Makefile                       |   1 +
 drivers/clk/samsung/clk-exynos5410.c               | 251 +++++++++++++++++++++
 include/dt-bindings/clock/exynos5410.h             | 175 ++++++++++++++
 4 files changed, 464 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/exynos5410-clock.txt
 create mode 100644 drivers/clk/samsung/clk-exynos5410.c
 create mode 100644 include/dt-bindings/clock/exynos5410.h
Documentation/devicetree/bindings/clock/exynos5410-clock.txt new file +37 -0
new file mode 100644
index 0000000..a462da231
@@ -0,0 +1,37 @@
+* Samsung Exynos5410 Clock Controller
+
+The Exynos5410 clock controller generates and supplies clock to various
+controllers within the Exynos5410 SoC.
+
+Required Properties:
+
+- compatible: should be "samsung,exynos5410-clock"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5410.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+       clock: clock-controller at 0x10010000 {
+               compatible = "samsung,exynos5410-clock";
+               reg = <0x10010000 0x30000>;
+               #clock-cells = <1>;
+       };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+          controller. Refer to the standard clock bindings for information
+          about 'clocks' and 'clock-names' property.
+
+       serial at 12C20000 {
+               compatible = "samsung,exynos4210-uart";
+               reg = <0x12C00000 0x100>;
+               interrupts = <0 51 0>;
+               clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+               clock-names = "uart", "clk_uart_baud0";
+       };
drivers/clk/samsung/Makefile +1 -0
index 3413380..5a446ca 100644
@@ -5,6 +5,7 @@
 obj-$(CONFIG_COMMON_CLK)       += clk.o clk-pll.o
 obj-$(CONFIG_ARCH_EXYNOS4)     += clk-exynos4.o
 obj-$(CONFIG_SOC_EXYNOS5250)   += clk-exynos5250.o
+obj-$(CONFIG_SOC_EXYNOS5410)   += clk-exynos5410.o
 obj-$(CONFIG_SOC_EXYNOS5420)   += clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)   += clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)      += clk-exynos-audss.o
drivers/clk/samsung/clk-exynos5410.c new file +251 -0
new file mode 100644
index 0000000..c5eba08
@@ -0,0 +1,251 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Tarek Dakhran <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5410 SoC.
+*/
+
+#include <dt-bindings/clock/exynos5410.h>
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk.h"
+
+#define APLL_LOCK               0x0
+#define APLL_CON0               0x100
+#define CPLL_LOCK               0x10020
+#define CPLL_CON0               0x10120
+#define MPLL_LOCK               0x4000
+#define MPLL_CON0               0x4100
+#define BPLL_LOCK               0x20010
+#define BPLL_CON0               0x20110
+#define KPLL_LOCK               0x28000
+#define KPLL_CON0               0x28100
+
+#define SRC_CPU                        0x200
+#define DIV_CPU0               0x500
+#define SRC_CPERI1             0x4204
+#define DIV_TOP0               0x10510
+#define DIV_TOP1               0x10514
+#define DIV_FSYS1              0x1054c
+#define DIV_FSYS2              0x10550
+#define DIV_PERIC0             0x10558
+#define SRC_TOP0               0x10210
+#define SRC_TOP1               0x10214
+#define SRC_TOP2               0x10218
+#define SRC_FSYS               0x10244
+#define SRC_PERIC0             0x10250
+#define SRC_MASK_FSYS          0x10340
+#define SRC_MASK_PERIC0                0x10350
+#define GATE_BUS_FSYS0         0x10740
+#define GATE_IP_FSYS           0x10944
+#define GATE_IP_PERIC          0x10950
+#define GATE_IP_PERIS          0x10960
+#define SRC_CDREX              0x20200
+#define SRC_KFC                        0x28200
+#define DIV_KFC0               0x28500
+
+/* list of PLLs */
+enum exynos5410_plls {
+       apll, cpll, mpll,
+       bpll, kpll,
+       nr_plls                 /* number of PLLs */
+};
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long exynos5410_clk_regs[] __initdata = {
+       SRC_CPU,
+       DIV_CPU0,
+       SRC_CPERI1,
+       DIV_TOP0,
+       DIV_TOP1,
+       DIV_FSYS1,
+       DIV_FSYS2,
+       DIV_PERIC0,
+       SRC_TOP0,
+       SRC_TOP1,
+       SRC_TOP2,
+       SRC_FSYS,
+       SRC_PERIC0,
+       SRC_MASK_FSYS,
+       SRC_MASK_PERIC0,
+       GATE_BUS_FSYS0,
+       GATE_IP_FSYS,
+       GATE_IP_PERIC,
+       GATE_IP_PERIS,
+       SRC_CDREX,
+       SRC_KFC,
+       DIV_KFC0,
+};
+
+/* list of all parent clocks */
+PNAME(apll_p)          = { "fin_pll", "fout_apll", };
+PNAME(bpll_p)          = { "fin_pll", "fout_bpll", };
+PNAME(cpll_p)          = { "fin_pll", "fout_cpll" };
+PNAME(mpll_p)          = { "fin_pll", "fout_mpll", };
+PNAME(kpll_p)          = { "fin_pll", "fout_kpll", };
+
+PNAME(mout_cpu_p)      = { "mout_apll", "sclk_mpll", };
+PNAME(mout_kfc_p)      = { "mout_kpll", "sclk_mpll", };
+
+PNAME(mpll_user_p)     = { "fin_pll", "sclk_mpll", };
+PNAME(bpll_user_p)     = { "fin_pll", "sclk_bpll", };
+PNAME(mpll_bpll_p)     = { "sclk_mpll_muxed", "sclk_bpll_muxed", };
+
+PNAME(group2_p)                = { "fin_pll", "fin_pll", "none", "none",
+                       "none", "none", "sclk_mpll_bpll",
+                        "none", "none", "sclk_cpll" };
+
+/* fixed rate clocks generated outside the soc */
+static struct samsung_fixed_rate_clock exynos5410_frt_ext_clks[] __initdata = {
+       FRATE(CLK_FIN_PLL, "fin_pll", NULL, CLK_IS_ROOT, 0),
+};
+
+static struct samsung_mux_clock exynos5410_mux_clks[] __initdata = {
+       MUX(0, "mout_apll", apll_p, SRC_CPU, 0, 1),
+       MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
+
+       MUX(0, "mout_kpll", kpll_p, SRC_KFC, 0, 1),
+       MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1),
+
+       MUX(0, "sclk_mpll", mpll_p, SRC_CPERI1, 8, 1),
+       MUX(0, "sclk_mpll_muxed", mpll_user_p, SRC_TOP2, 20, 1),
+
+       MUX(0, "sclk_bpll", bpll_p, SRC_CDREX, 0, 1),
+       MUX(0, "sclk_bpll_muxed", bpll_user_p, SRC_TOP2, 24, 1),
+
+       MUX(0, "sclk_cpll", cpll_p, SRC_TOP2, 8, 1),
+
+       MUX(0, "sclk_mpll_bpll", mpll_bpll_p, SRC_TOP1, 20, 1),
+
+       MUX(0, "mout_mmc0", group2_p, SRC_FSYS, 0, 4),
+       MUX(0, "mout_mmc1", group2_p, SRC_FSYS, 4, 4),
+       MUX(0, "mout_mmc2", group2_p, SRC_FSYS, 8, 4),
+
+       MUX(0, "mout_uart0", group2_p, SRC_PERIC0, 0, 4),
+       MUX(0, "mout_uart1", group2_p, SRC_PERIC0, 4, 4),
+       MUX(0, "mout_uart2", group2_p, SRC_PERIC0, 8, 4),
+
+       MUX(0, "mout_aclk200", mpll_bpll_p, SRC_TOP0, 12, 1),
+       MUX(0, "mout_aclk400", mpll_bpll_p, SRC_TOP0, 20, 1),
+};
+
+static struct samsung_div_clock exynos5410_div_clks[] __initdata = {
+       DIV(0, "div_arm", "mout_cpu", DIV_CPU0, 0, 3),
+       DIV(0, "div_arm2", "div_arm", DIV_CPU0, 28, 3),
+
+       DIV(0, "div_acp", "div_arm2", DIV_CPU0, 8, 3),
+       DIV(0, "div_cpud", "div_arm2", DIV_CPU0, 4, 3),
+       DIV(0, "div_atb", "div_arm2", DIV_CPU0, 16, 3),
+       DIV(0, "pclk_dbg", "div_arm2", DIV_CPU0, 20, 3),
+
+       DIV(0, "div_kfc", "mout_kfc", DIV_KFC0, 0, 3),
+       DIV(0, "div_aclk", "div_kfc", DIV_KFC0, 4, 3),
+       DIV(0, "div_pclk", "div_kfc", DIV_KFC0, 20, 3),
+
+       DIV(0, "aclk66_pre", "sclk_mpll_muxed", DIV_TOP1, 24, 3),
+       DIV(0, "aclk66", "aclk66_pre", DIV_TOP0, 0, 3),
+
+       DIV(0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+       DIV(0, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
+       DIV(0, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
+
+       DIV_F(0, "div_mmc_pre0", "div_mmc0",
+                       DIV_FSYS1, 8, 8, CLK_SET_RATE_PARENT, 0),
+       DIV_F(0, "div_mmc_pre1", "div_mmc1",
+                       DIV_FSYS1, 24, 8, CLK_SET_RATE_PARENT, 0),
+       DIV_F(0, "div_mmc_pre2", "div_mmc2",
+                       DIV_FSYS2, 8, 8, CLK_SET_RATE_PARENT, 0),
+
+       DIV(0, "div_uart0", "mout_uart0", DIV_PERIC0, 0, 4),
+       DIV(0, "div_uart1", "mout_uart1", DIV_PERIC0, 4, 4),
+       DIV(0, "div_uart2", "mout_uart2", DIV_PERIC0, 8, 4),
+       DIV(0, "div_uart3", "mout_uart3", DIV_PERIC0, 12, 4),
+
+       DIV(0, "aclk200", "mout_aclk200", DIV_TOP0, 12, 3),
+       DIV(0, "aclk400", "mout_aclk400", DIV_TOP0, 24, 3),
+};
+
+static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
+       GATE(CLK_MCT, "mct", "aclk66", GATE_IP_PERIS, 18, 0, 0),
+
+       GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc_pre0",
+                       SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
+       GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc_pre1",
+                       SRC_MASK_FSYS, 4, CLK_SET_RATE_PARENT, 0),
+       GATE(CLK_SCLK_MMC2, "sclk_mmc2", "div_mmc_pre2",
+                       SRC_MASK_FSYS, 8, CLK_SET_RATE_PARENT, 0),
+
+       GATE(CLK_MMC0, "sdmmc0", "aclk200", GATE_BUS_FSYS0, 12, 0, 0),
+       GATE(CLK_MMC1, "sdmmc1", "aclk200", GATE_BUS_FSYS0, 13, 0, 0),
+       GATE(CLK_MMC2, "sdmmc2", "aclk200", GATE_BUS_FSYS0, 14, 0, 0),
+
+       GATE(CLK_UART0, "uart0", "aclk66", GATE_IP_PERIC, 0, 0, 0),
+       GATE(CLK_UART1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0),
+       GATE(CLK_UART2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0),
+
+       GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
+                       SRC_MASK_PERIC0, 0, CLK_SET_RATE_PARENT, 0),
+       GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
+                       SRC_MASK_PERIC0, 4, CLK_SET_RATE_PARENT, 0),
+       GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
+                       SRC_MASK_PERIC0, 8, CLK_SET_RATE_PARENT, 0),
+};
+
+static struct samsung_pll_clock exynos5410_plls[nr_plls] __initdata = {
+       [apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
+               APLL_CON0, NULL),
+       [cpll] = PLL(pll_35xx, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK,
+               CPLL_CON0, NULL),
+       [mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll", MPLL_LOCK,
+               MPLL_CON0, NULL),
+       [bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll", BPLL_LOCK,
+               BPLL_CON0, NULL),
+       [kpll] = PLL(pll_35xx, CLK_FOUT_KPLL, "fout_kpll", "fin_pll", KPLL_LOCK,
+               KPLL_CON0, NULL),
+};
+
+static struct of_device_id ext_clk_match[] __initdata = {
+       { .compatible = "samsung,clock-oscclk", .data = (void *)0, },
+       { },
+};
+
+/* register exynos5410 clocks */
+static void __init exynos5410_clk_init(struct device_node *np)
+{
+       void __iomem *reg_base;
+
+       reg_base = of_iomap(np, 0);
+       if (!reg_base)
+               panic("%s: failed to map registers\n", __func__);
+
+       samsung_clk_init(np, reg_base, CLK_NR_CLKS,
+                       exynos5410_clk_regs, ARRAY_SIZE(exynos5410_clk_regs),
+                       NULL, 0);
+       samsung_clk_of_register_fixed_ext(exynos5410_frt_ext_clks,
+                       ARRAY_SIZE(exynos5410_frt_ext_clks),
+                       ext_clk_match);
+       samsung_clk_register_pll(exynos5410_plls, ARRAY_SIZE(exynos5410_plls),
+                                       reg_base);
+
+       samsung_clk_register_mux(exynos5410_mux_clks,
+                       ARRAY_SIZE(exynos5410_mux_clks));
+       samsung_clk_register_div(exynos5410_div_clks,
+                       ARRAY_SIZE(exynos5410_div_clks));
+       samsung_clk_register_gate(exynos5410_gate_clks,
+                       ARRAY_SIZE(exynos5410_gate_clks));
+
+       pr_debug("Exynos5410: clock setup completed.\n");
+}
+CLK_OF_DECLARE(exynos5410_clk, "samsung,exynos5410-clock", exynos5410_clk_init);
include/dt-bindings/clock/exynos5410.h new file +175 -0
new file mode 100644
index 0000000..9b4a58b
@@ -0,0 +1,175 @@
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS_5410_H
+#define _DT_BINDINGS_CLOCK_EXYNOS_5410_H
+
+/* core clocks */
+#define CLK_FIN_PLL 1
+#define CLK_FOUT_APLL 2
+#define CLK_FOUT_CPLL 3
+#define CLK_FOUT_DPLL 4
+#define CLK_FOUT_EPLL 5
+#define CLK_FOUT_RPLL 6
+#define CLK_FOUT_IPLL 7
+#define CLK_FOUT_SPLL 8
+#define CLK_FOUT_VPLL 9
+#define CLK_FOUT_MPLL 10
+#define CLK_FOUT_BPLL 11
+#define CLK_FOUT_KPLL 12
+
+/* gate for special clocks (sclk) */
+#define CLK_SCLK_UART0 128
+#define CLK_SCLK_UART1 129
+#define CLK_SCLK_UART2 130
+#define CLK_SCLK_UART3 131
+#define CLK_SCLK_MMC0 132
+#define CLK_SCLK_MMC1 133
+#define CLK_SCLK_MMC2 134
+#define CLK_SCLK_SPI0 135
+#define CLK_SCLK_SPI1 136
+#define CLK_SCLK_SPI2 137
+#define CLK_SCLK_I2S1 138
+#define CLK_SCLK_I2S2 139
+#define CLK_SCLK_PCM1 140
+#define CLK_SCLK_PCM2 141
+#define CLK_SCLK_SPDIF 142
+#define CLK_SCLK_HDMI 143
+#define CLK_SCLK_PIXEL 144
+#define CLK_SCLK_DP1 145
+#define CLK_SCLK_MIPI1 146
+#define CLK_SCLK_FIMD1 147
+#define CLK_SCLK_MAUDIO0 148
+#define CLK_SCLK_MAUPCM0 149
+#define CLK_SCLK_USBD300 150
+#define CLK_SCLK_USBD301 151
+#define CLK_SCLK_USBPHY300 152
+#define CLK_SCLK_USBPHY301 153
+#define CLK_SCLK_UNIPRO 154
+#define CLK_SCLK_PWM 155
+#define CLK_SCLK_GSCL_WA 156
+#define CLK_SCLK_GSCL_WB 157
+#define CLK_SCLK_HDMIPHY 158
+
+/* gate clocks */
+#define CLK_ACLK66_PERIC 256
+#define CLK_UART0 257
+#define CLK_UART1 258
+#define CLK_UART2 259
+#define CLK_UART3 260
+#define CLK_I2C0 261
+#define CLK_I2C1 262
+#define CLK_I2C2 263
+#define CLK_I2C3 264
+#define CLK_I2C4 265
+#define CLK_I2C5 266
+#define CLK_I2C6 267
+#define CLK_I2C7 268
+#define CLK_I2C_HDMI 269
+#define CLK_TSADC 270
+#define CLK_SPI0 271
+#define CLK_SPI1 272
+#define CLK_SPI2 273
+#define CLK_KEYIF 274
+#define CLK_I2S1 275
+#define CLK_I2S2 276
+#define CLK_PCM1 277
+#define CLK_PCM2 278
+#define CLK_PWM 279
+#define CLK_SPDIF 280
+#define CLK_I2C8 281
+#define CLK_I2C9 282
+#define CLK_I2C10 283
+#define CLK_ACLK66_PSGEN 300
+#define CLK_CHIPID 301
+#define CLK_SYSREG 302
+#define CLK_TZPC0 303
+#define CLK_TZPC1 304
+#define CLK_TZPC2 305
+#define CLK_TZPC3 306
+#define CLK_TZPC4 307
+#define CLK_TZPC5 308
+#define CLK_TZPC6 309
+#define CLK_TZPC7 310
+#define CLK_TZPC8 311
+#define CLK_TZPC9 312
+#define CLK_HDMI_CEC 313
+#define CLK_SECKEY 314
+#define CLK_MCT 315
+#define CLK_WDT 316
+#define CLK_RTC 317
+#define CLK_TMU 318
+#define CLK_TMU_GPU 319
+#define CLK_PCLK66_GPIO 330
+#define CLK_ACLK200_FSYS2 350
+#define CLK_MMC0 351
+#define CLK_MMC1 352
+#define CLK_MMC2 353
+#define CLK_SROMC 354
+#define CLK_UFS 355
+#define CLK_ACLK200_FSYS 360
+#define CLK_TSI 361
+#define CLK_PDMA0 362
+#define CLK_PDMA1 363
+#define CLK_RTIC 364
+#define CLK_USBH20 365
+#define CLK_USBD300 366
+#define CLK_USBD301 367
+#define CLK_ACLK400_MSCL 380
+#define CLK_MSCL0 381
+#define CLK_MSCL1 382
+#define CLK_MSCL2 383
+#define CLK_SMMU_MSCL0 384
+#define CLK_SMMU_MSCL1 385
+#define CLK_SMMU_MSCL2 386
+#define CLK_ACLK333 400
+#define CLK_MFC 401
+#define CLK_SMMU_MFCL 402
+#define CLK_SMMU_MFCR 403
+#define CLK_ACLK200_DISP1 410
+#define CLK_DSIM1 411
+#define CLK_DP1 412
+#define CLK_HDMI 413
+#define CLK_ACLK300_DISP1 420
+#define CLK_FIMD1 421
+#define CLK_SMMU_FIMD1 422
+#define CLK_ACLK166 430
+#define CLK_MIXER 431
+#define CLK_ACLK266 440
+#define CLK_ROTATOR 441
+#define CLK_MDMA1 442
+#define CLK_SMMU_ROTATOR 443
+#define CLK_SMMU_MDMA1 444
+#define CLK_ACLK300_JPEG 450
+#define CLK_JPEG 451
+#define CLK_JPEG2 452
+#define CLK_SMMU_JPEG 453
+#define CLK_ACLK300_GSCL 460
+#define CLK_SMMU_GSCL0 461
+#define CLK_SMMU_GSCL1 462
+#define CLK_GSCL_WA 463
+#define CLK_GSCL_WB 464
+#define CLK_GSCL0 465
+#define CLK_GSCL1 466
+#define CLK_CLK_3AA 467
+#define CLK_ACLK266_G2D 470
+#define CLK_SSS 471
+#define CLK_SLIM_SSS 472
+#define CLK_MDMA0 473
+#define CLK_ACLK333_G2D 480
+#define CLK_G2D 481
+#define CLK_ACLK333_432_GSCL 490
+#define CLK_SMMU_3AA 491
+#define CLK_SMMU_FIMCL0 492
+#define CLK_SMMU_FIMCL1 493
+#define CLK_SMMU_FIMCL3 494
+#define CLK_FIMC_LITE3 495
+#define CLK_ACLK_G3D 500
+#define CLK_G3D 501
+#define CLK_SMMU_MIXER 502
+
+/* mux clocks */
+#define CLK_MOUT_HDMI 640
+
+/* divider clocks */
+#define CLK_DOUT_PIXEL 768
+#define CLK_NR_CLKS 769
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS_5410_H */
Signature · 1 line
1.8.1.5
#7 lore raw

Re: [PATCH v2 2/4] clk: exynos5410: register clocks using common clock framework

Is the PLL35xx driver compatible with the ones used on 5410?

+static struct samsung_pll_clock exynos5410_plls[nr_plls] __initdata = {
+ [apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
+ APLL_CON0, NULL),
+ [cpll] = PLL(pll_35xx, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK,
+ CPLL_CON0, NULL),
+ [mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll", MPLL_LOCK,
+ MPLL_CON0, NULL),
+ [bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll", BPLL_LOCK,
+ BPLL_CON0, NULL),
+ [kpll] = PLL(pll_35xx, CLK_FOUT_KPLL, "fout_kpll", "fin_pll", KPLL_LOCK,
+ KPLL_CON0, NULL),

It registers all the PLL's with the same PLL. While the manual says others PLL names.

Regards,
Mauro

Quoted 524 lines · Mike Turquette

Quoting Vyacheslav Tyrtov (2013-10-14 08:08:23)

Quoted 7 lines

From: Tarek Dakhran <[email protected]>

The EXYNOS5410 clocks are statically listed and registered using the Samsung specific common clock helper functions.

Looks good to me. Any objections for me to take this through the clk tree?

Regards,
Mike

Quoted 504 lines
---
 .../devicetree/bindings/clock/exynos5410-clock.txt |  37 +++
 drivers/clk/samsung/Makefile                       |   1 +
 drivers/clk/samsung/clk-exynos5410.c               | 251 +++++++++++++++++++++
 include/dt-bindings/clock/exynos5410.h             | 175 ++++++++++++++
 4 files changed, 464 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/exynos5410-clock.txt
 create mode 100644 drivers/clk/samsung/clk-exynos5410.c
 create mode 100644 include/dt-bindings/clock/exynos5410.h
Documentation/devicetree/bindings/clock/exynos5410-clock.txt new file +37 -0
new file mode 100644
index 0000000..a462da231
@@ -0,0 +1,37 @@
+* Samsung Exynos5410 Clock Controller
+
+The Exynos5410 clock controller generates and supplies clock to various
+controllers within the Exynos5410 SoC.
+
+Required Properties:
+
+- compatible: should be "samsung,exynos5410-clock"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5410.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+       clock: clock-controller at 0x10010000 {
+               compatible = "samsung,exynos5410-clock";
+               reg = <0x10010000 0x30000>;
+               #clock-cells = <1>;
+       };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+          controller. Refer to the standard clock bindings for information
+          about 'clocks' and 'clock-names' property.
+
+       serial at 12C20000 {
+               compatible = "samsung,exynos4210-uart";
+               reg = <0x12C00000 0x100>;
+               interrupts = <0 51 0>;
+               clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+               clock-names = "uart", "clk_uart_baud0";
+       };
drivers/clk/samsung/Makefile +1 -0
index 3413380..5a446ca 100644
@@ -5,6 +5,7 @@
 obj-$(CONFIG_COMMON_CLK)       += clk.o clk-pll.o
 obj-$(CONFIG_ARCH_EXYNOS4)     += clk-exynos4.o
 obj-$(CONFIG_SOC_EXYNOS5250)   += clk-exynos5250.o
+obj-$(CONFIG_SOC_EXYNOS5410)   += clk-exynos5410.o
 obj-$(CONFIG_SOC_EXYNOS5420)   += clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)   += clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)      += clk-exynos-audss.o
drivers/clk/samsung/clk-exynos5410.c new file +251 -0
new file mode 100644
index 0000000..c5eba08
@@ -0,0 +1,251 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Tarek Dakhran <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5410 SoC.
+*/
+
+#include <dt-bindings/clock/exynos5410.h>
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk.h"
+
+#define APLL_LOCK               0x0
+#define APLL_CON0               0x100
+#define CPLL_LOCK               0x10020
+#define CPLL_CON0               0x10120
+#define MPLL_LOCK               0x4000
+#define MPLL_CON0               0x4100
+#define BPLL_LOCK               0x20010
+#define BPLL_CON0               0x20110
+#define KPLL_LOCK               0x28000
+#define KPLL_CON0               0x28100
+
+#define SRC_CPU                        0x200
+#define DIV_CPU0               0x500
+#define SRC_CPERI1             0x4204
+#define DIV_TOP0               0x10510
+#define DIV_TOP1               0x10514
+#define DIV_FSYS1              0x1054c
+#define DIV_FSYS2              0x10550
+#define DIV_PERIC0             0x10558
+#define SRC_TOP0               0x10210
+#define SRC_TOP1               0x10214
+#define SRC_TOP2               0x10218
+#define SRC_FSYS               0x10244
+#define SRC_PERIC0             0x10250
+#define SRC_MASK_FSYS          0x10340
+#define SRC_MASK_PERIC0                0x10350
+#define GATE_BUS_FSYS0         0x10740
+#define GATE_IP_FSYS           0x10944
+#define GATE_IP_PERIC          0x10950
+#define GATE_IP_PERIS          0x10960
+#define SRC_CDREX              0x20200
+#define SRC_KFC                        0x28200
+#define DIV_KFC0               0x28500
+
+/* list of PLLs */
+enum exynos5410_plls {
+       apll, cpll, mpll,
+       bpll, kpll,
+       nr_plls                 /* number of PLLs */
+};
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long exynos5410_clk_regs[] __initdata = {
+       SRC_CPU,
+       DIV_CPU0,
+       SRC_CPERI1,
+       DIV_TOP0,
+       DIV_TOP1,
+       DIV_FSYS1,
+       DIV_FSYS2,
+       DIV_PERIC0,
+       SRC_TOP0,
+       SRC_TOP1,
+       SRC_TOP2,
+       SRC_FSYS,
+       SRC_PERIC0,
+       SRC_MASK_FSYS,
+       SRC_MASK_PERIC0,
+       GATE_BUS_FSYS0,
+       GATE_IP_FSYS,
+       GATE_IP_PERIC,
+       GATE_IP_PERIS,
+       SRC_CDREX,
+       SRC_KFC,
+       DIV_KFC0,
+};
+
+/* list of all parent clocks */
+PNAME(apll_p)          = { "fin_pll", "fout_apll", };
+PNAME(bpll_p)          = { "fin_pll", "fout_bpll", };
+PNAME(cpll_p)          = { "fin_pll", "fout_cpll" };
+PNAME(mpll_p)          = { "fin_pll", "fout_mpll", };
+PNAME(kpll_p)          = { "fin_pll", "fout_kpll", };
+
+PNAME(mout_cpu_p)      = { "mout_apll", "sclk_mpll", };
+PNAME(mout_kfc_p)      = { "mout_kpll", "sclk_mpll", };
+
+PNAME(mpll_user_p)     = { "fin_pll", "sclk_mpll", };
+PNAME(bpll_user_p)     = { "fin_pll", "sclk_bpll", };
+PNAME(mpll_bpll_p)     = { "sclk_mpll_muxed", "sclk_bpll_muxed", };
+
+PNAME(group2_p)                = { "fin_pll", "fin_pll", "none", "none",
+                       "none", "none", "sclk_mpll_bpll",
+                        "none", "none", "sclk_cpll" };
+
+/* fixed rate clocks generated outside the soc */
+static struct samsung_fixed_rate_clock exynos5410_frt_ext_clks[] __initdata = {
+       FRATE(CLK_FIN_PLL, "fin_pll", NULL, CLK_IS_ROOT, 0),
+};
+
+static struct samsung_mux_clock exynos5410_mux_clks[] __initdata = {
+       MUX(0, "mout_apll", apll_p, SRC_CPU, 0, 1),
+       MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
+
+       MUX(0, "mout_kpll", kpll_p, SRC_KFC, 0, 1),
+       MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1),
+
+       MUX(0, "sclk_mpll", mpll_p, SRC_CPERI1, 8, 1),
+       MUX(0, "sclk_mpll_muxed", mpll_user_p, SRC_TOP2, 20, 1),
+
+       MUX(0, "sclk_bpll", bpll_p, SRC_CDREX, 0, 1),
+       MUX(0, "sclk_bpll_muxed", bpll_user_p, SRC_TOP2, 24, 1),
+
+       MUX(0, "sclk_cpll", cpll_p, SRC_TOP2, 8, 1),
+
+       MUX(0, "sclk_mpll_bpll", mpll_bpll_p, SRC_TOP1, 20, 1),
+
+       MUX(0, "mout_mmc0", group2_p, SRC_FSYS, 0, 4),
+       MUX(0, "mout_mmc1", group2_p, SRC_FSYS, 4, 4),
+       MUX(0, "mout_mmc2", group2_p, SRC_FSYS, 8, 4),
+
+       MUX(0, "mout_uart0", group2_p, SRC_PERIC0, 0, 4),
+       MUX(0, "mout_uart1", group2_p, SRC_PERIC0, 4, 4),
+       MUX(0, "mout_uart2", group2_p, SRC_PERIC0, 8, 4),
+
+       MUX(0, "mout_aclk200", mpll_bpll_p, SRC_TOP0, 12, 1),
+       MUX(0, "mout_aclk400", mpll_bpll_p, SRC_TOP0, 20, 1),
+};
+
+static struct samsung_div_clock exynos5410_div_clks[] __initdata = {
+       DIV(0, "div_arm", "mout_cpu", DIV_CPU0, 0, 3),
+       DIV(0, "div_arm2", "div_arm", DIV_CPU0, 28, 3),
+
+       DIV(0, "div_acp", "div_arm2", DIV_CPU0, 8, 3),
+       DIV(0, "div_cpud", "div_arm2", DIV_CPU0, 4, 3),
+       DIV(0, "div_atb", "div_arm2", DIV_CPU0, 16, 3),
+       DIV(0, "pclk_dbg", "div_arm2", DIV_CPU0, 20, 3),
+
+       DIV(0, "div_kfc", "mout_kfc", DIV_KFC0, 0, 3),
+       DIV(0, "div_aclk", "div_kfc", DIV_KFC0, 4, 3),
+       DIV(0, "div_pclk", "div_kfc", DIV_KFC0, 20, 3),
+
+       DIV(0, "aclk66_pre", "sclk_mpll_muxed", DIV_TOP1, 24, 3),
+       DIV(0, "aclk66", "aclk66_pre", DIV_TOP0, 0, 3),
+
+       DIV(0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+       DIV(0, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
+       DIV(0, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
+
+       DIV_F(0, "div_mmc_pre0", "div_mmc0",
+                       DIV_FSYS1, 8, 8, CLK_SET_RATE_PARENT, 0),
+       DIV_F(0, "div_mmc_pre1", "div_mmc1",
+                       DIV_FSYS1, 24, 8, CLK_SET_RATE_PARENT, 0),
+       DIV_F(0, "div_mmc_pre2", "div_mmc2",
+                       DIV_FSYS2, 8, 8, CLK_SET_RATE_PARENT, 0),
+
+       DIV(0, "div_uart0", "mout_uart0", DIV_PERIC0, 0, 4),
+       DIV(0, "div_uart1", "mout_uart1", DIV_PERIC0, 4, 4),
+       DIV(0, "div_uart2", "mout_uart2", DIV_PERIC0, 8, 4),
+       DIV(0, "div_uart3", "mout_uart3", DIV_PERIC0, 12, 4),
+
+       DIV(0, "aclk200", "mout_aclk200", DIV_TOP0, 12, 3),
+       DIV(0, "aclk400", "mout_aclk400", DIV_TOP0, 24, 3),
+};
+
+static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
+       GATE(CLK_MCT, "mct", "aclk66", GATE_IP_PERIS, 18, 0, 0),
+
+       GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc_pre0",
+                       SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
+       GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc_pre1",
+                       SRC_MASK_FSYS, 4, CLK_SET_RATE_PARENT, 0),
+       GATE(CLK_SCLK_MMC2, "sclk_mmc2", "div_mmc_pre2",
+                       SRC_MASK_FSYS, 8, CLK_SET_RATE_PARENT, 0),
+
+       GATE(CLK_MMC0, "sdmmc0", "aclk200", GATE_BUS_FSYS0, 12, 0, 0),
+       GATE(CLK_MMC1, "sdmmc1", "aclk200", GATE_BUS_FSYS0, 13, 0, 0),
+       GATE(CLK_MMC2, "sdmmc2", "aclk200", GATE_BUS_FSYS0, 14, 0, 0),
+
+       GATE(CLK_UART0, "uart0", "aclk66", GATE_IP_PERIC, 0, 0, 0),
+       GATE(CLK_UART1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0),
+       GATE(CLK_UART2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0),
+
+       GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
+                       SRC_MASK_PERIC0, 0, CLK_SET_RATE_PARENT, 0),
+       GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
+                       SRC_MASK_PERIC0, 4, CLK_SET_RATE_PARENT, 0),
+       GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
+                       SRC_MASK_PERIC0, 8, CLK_SET_RATE_PARENT, 0),
+};
+
+static struct samsung_pll_clock exynos5410_plls[nr_plls] __initdata = {
+       [apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
+               APLL_CON0, NULL),
+       [cpll] = PLL(pll_35xx, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK,
+               CPLL_CON0, NULL),
+       [mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll", MPLL_LOCK,
+               MPLL_CON0, NULL),
+       [bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll", BPLL_LOCK,
+               BPLL_CON0, NULL),
+       [kpll] = PLL(pll_35xx, CLK_FOUT_KPLL, "fout_kpll", "fin_pll", KPLL_LOCK,
+               KPLL_CON0, NULL),
+};
+
+static struct of_device_id ext_clk_match[] __initdata = {
+       { .compatible = "samsung,clock-oscclk", .data = (void *)0, },
+       { },
+};
+
+/* register exynos5410 clocks */
+static void __init exynos5410_clk_init(struct device_node *np)
+{
+       void __iomem *reg_base;
+
+       reg_base = of_iomap(np, 0);
+       if (!reg_base)
+               panic("%s: failed to map registers\n", __func__);
+
+       samsung_clk_init(np, reg_base, CLK_NR_CLKS,
+                       exynos5410_clk_regs, ARRAY_SIZE(exynos5410_clk_regs),
+                       NULL, 0);
+       samsung_clk_of_register_fixed_ext(exynos5410_frt_ext_clks,
+                       ARRAY_SIZE(exynos5410_frt_ext_clks),
+                       ext_clk_match);
+       samsung_clk_register_pll(exynos5410_plls, ARRAY_SIZE(exynos5410_plls),
+                                       reg_base);
+
+       samsung_clk_register_mux(exynos5410_mux_clks,
+                       ARRAY_SIZE(exynos5410_mux_clks));
+       samsung_clk_register_div(exynos5410_div_clks,
+                       ARRAY_SIZE(exynos5410_div_clks));
+       samsung_clk_register_gate(exynos5410_gate_clks,
+                       ARRAY_SIZE(exynos5410_gate_clks));
+
+       pr_debug("Exynos5410: clock setup completed.\n");
+}
+CLK_OF_DECLARE(exynos5410_clk, "samsung,exynos5410-clock", exynos5410_clk_init);
include/dt-bindings/clock/exynos5410.h new file +175 -1
new file mode 100644
index 0000000..9b4a58b
@@ -0,0 +1,175 @@
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS_5410_H
+#define _DT_BINDINGS_CLOCK_EXYNOS_5410_H
+
+/* core clocks */
+#define CLK_FIN_PLL 1
+#define CLK_FOUT_APLL 2
+#define CLK_FOUT_CPLL 3
+#define CLK_FOUT_DPLL 4
+#define CLK_FOUT_EPLL 5
+#define CLK_FOUT_RPLL 6
+#define CLK_FOUT_IPLL 7
+#define CLK_FOUT_SPLL 8
+#define CLK_FOUT_VPLL 9
+#define CLK_FOUT_MPLL 10
+#define CLK_FOUT_BPLL 11
+#define CLK_FOUT_KPLL 12
+
+/* gate for special clocks (sclk) */
+#define CLK_SCLK_UART0 128
+#define CLK_SCLK_UART1 129
+#define CLK_SCLK_UART2 130
+#define CLK_SCLK_UART3 131
+#define CLK_SCLK_MMC0 132
+#define CLK_SCLK_MMC1 133
+#define CLK_SCLK_MMC2 134
+#define CLK_SCLK_SPI0 135
+#define CLK_SCLK_SPI1 136
+#define CLK_SCLK_SPI2 137
+#define CLK_SCLK_I2S1 138
+#define CLK_SCLK_I2S2 139
+#define CLK_SCLK_PCM1 140
+#define CLK_SCLK_PCM2 141
+#define CLK_SCLK_SPDIF 142
+#define CLK_SCLK_HDMI 143
+#define CLK_SCLK_PIXEL 144
+#define CLK_SCLK_DP1 145
+#define CLK_SCLK_MIPI1 146
+#define CLK_SCLK_FIMD1 147
+#define CLK_SCLK_MAUDIO0 148
+#define CLK_SCLK_MAUPCM0 149
+#define CLK_SCLK_USBD300 150
+#define CLK_SCLK_USBD301 151
+#define CLK_SCLK_USBPHY300 152
+#define CLK_SCLK_USBPHY301 153
+#define CLK_SCLK_UNIPRO 154
+#define CLK_SCLK_PWM 155
+#define CLK_SCLK_GSCL_WA 156
+#define CLK_SCLK_GSCL_WB 157
+#define CLK_SCLK_HDMIPHY 158
+
+/* gate clocks */
+#define CLK_ACLK66_PERIC 256
+#define CLK_UART0 257
+#define CLK_UART1 258
+#define CLK_UART2 259
+#define CLK_UART3 260
+#define CLK_I2C0 261
+#define CLK_I2C1 262
+#define CLK_I2C2 263
+#define CLK_I2C3 264
+#define CLK_I2C4 265
+#define CLK_I2C5 266
+#define CLK_I2C6 267
+#define CLK_I2C7 268
+#define CLK_I2C_HDMI 269
+#define CLK_TSADC 270
+#define CLK_SPI0 271
+#define CLK_SPI1 272
+#define CLK_SPI2 273
+#define CLK_KEYIF 274
+#define CLK_I2S1 275
+#define CLK_I2S2 276
+#define CLK_PCM1 277
+#define CLK_PCM2 278
+#define CLK_PWM 279
+#define CLK_SPDIF 280
+#define CLK_I2C8 281
+#define CLK_I2C9 282
+#define CLK_I2C10 283
+#define CLK_ACLK66_PSGEN 300
+#define CLK_CHIPID 301
+#define CLK_SYSREG 302
+#define CLK_TZPC0 303
+#define CLK_TZPC1 304
+#define CLK_TZPC2 305
+#define CLK_TZPC3 306
+#define CLK_TZPC4 307
+#define CLK_TZPC5 308
+#define CLK_TZPC6 309
+#define CLK_TZPC7 310
+#define CLK_TZPC8 311
+#define CLK_TZPC9 312
+#define CLK_HDMI_CEC 313
+#define CLK_SECKEY 314
+#define CLK_MCT 315
+#define CLK_WDT 316
+#define CLK_RTC 317
+#define CLK_TMU 318
+#define CLK_TMU_GPU 319
+#define CLK_PCLK66_GPIO 330
+#define CLK_ACLK200_FSYS2 350
+#define CLK_MMC0 351
+#define CLK_MMC1 352
+#define CLK_MMC2 353
+#define CLK_SROMC 354
+#define CLK_UFS 355
+#define CLK_ACLK200_FSYS 360
+#define CLK_TSI 361
+#define CLK_PDMA0 362
+#define CLK_PDMA1 363
+#define CLK_RTIC 364
+#define CLK_USBH20 365
+#define CLK_USBD300 366
+#define CLK_USBD301 367
+#define CLK_ACLK400_MSCL 380
+#define CLK_MSCL0 381
+#define CLK_MSCL1 382
+#define CLK_MSCL2 383
+#define CLK_SMMU_MSCL0 384
+#define CLK_SMMU_MSCL1 385
+#define CLK_SMMU_MSCL2 386
+#define CLK_ACLK333 400
+#define CLK_MFC 401
+#define CLK_SMMU_MFCL 402
+#define CLK_SMMU_MFCR 403
+#define CLK_ACLK200_DISP1 410
+#define CLK_DSIM1 411
+#define CLK_DP1 412
+#define CLK_HDMI 413
+#define CLK_ACLK300_DISP1 420
+#define CLK_FIMD1 421
+#define CLK_SMMU_FIMD1 422
+#define CLK_ACLK166 430
+#define CLK_MIXER 431
+#define CLK_ACLK266 440
+#define CLK_ROTATOR 441
+#define CLK_MDMA1 442
+#define CLK_SMMU_ROTATOR 443
+#define CLK_SMMU_MDMA1 444
+#define CLK_ACLK300_JPEG 450
+#define CLK_JPEG 451
+#define CLK_JPEG2 452
+#define CLK_SMMU_JPEG 453
+#define CLK_ACLK300_GSCL 460
+#define CLK_SMMU_GSCL0 461
+#define CLK_SMMU_GSCL1 462
+#define CLK_GSCL_WA 463
+#define CLK_GSCL_WB 464
+#define CLK_GSCL0 465
+#define CLK_GSCL1 466
+#define CLK_CLK_3AA 467
+#define CLK_ACLK266_G2D 470
+#define CLK_SSS 471
+#define CLK_SLIM_SSS 472
+#define CLK_MDMA0 473
+#define CLK_ACLK333_G2D 480
+#define CLK_G2D 481
+#define CLK_ACLK333_432_GSCL 490
+#define CLK_SMMU_3AA 491
+#define CLK_SMMU_FIMCL0 492
+#define CLK_SMMU_FIMCL1 493
+#define CLK_SMMU_FIMCL3 494
+#define CLK_FIMC_LITE3 495
+#define CLK_ACLK_G3D 500
+#define CLK_G3D 501
+#define CLK_SMMU_MIXER 502
+
+/* mux clocks */
+#define CLK_MOUT_HDMI 640
+
+/* divider clocks */
+#define CLK_DOUT_PIXEL 768
+#define CLK_NR_CLKS 769
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS_5410_H */
--
Quoted 1 line

1.8.1.5

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

#8 lore raw

Re: [PATCH v2 2/4] clk: exynos5410: register clocks using common clock framework

Nevermind, didn't read the clk-pll.c properly.. pll_35xx and pl_2550 will default to the same code.

Best Regards,
Mauro

Quoted 545 lines · Mauro Ribeiro

Is the PLL35xx driver compatible with the ones used on 5410?

drivers/clk/samsung/clk-exynos5410.c new file +11 -0
+static struct samsung_pll_clock exynos5410_plls[nr_plls] __initdata = {
+       [apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
+               APLL_CON0, NULL),
+       [cpll] = PLL(pll_35xx, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK,
+               CPLL_CON0, NULL),
+       [mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll", MPLL_LOCK,
+               MPLL_CON0, NULL),
+       [bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll", BPLL_LOCK,
+               BPLL_CON0, NULL),
+       [kpll] = PLL(pll_35xx, CLK_FOUT_KPLL, "fout_kpll", "fin_pll", KPLL_LOCK,
+               KPLL_CON0, NULL),

It registers all the PLL's with the same PLL. While the manual says others PLL names.

Regards,
Mauro

Quoted 524 lines · Mike Turquette

Quoting Vyacheslav Tyrtov (2013-10-14 08:08:23)

Quoted 7 lines

From: Tarek Dakhran <[email protected]>

The EXYNOS5410 clocks are statically listed and registered using the Samsung specific common clock helper functions.

Looks good to me. Any objections for me to take this through the clk tree?

Regards,
Mike

Quoted 504 lines
---
 .../devicetree/bindings/clock/exynos5410-clock.txt |  37 +++
 drivers/clk/samsung/Makefile                       |   1 +
 drivers/clk/samsung/clk-exynos5410.c               | 251 +++++++++++++++++++++
 include/dt-bindings/clock/exynos5410.h             | 175 ++++++++++++++
 4 files changed, 464 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/exynos5410-clock.txt
 create mode 100644 drivers/clk/samsung/clk-exynos5410.c
 create mode 100644 include/dt-bindings/clock/exynos5410.h
Documentation/devicetree/bindings/clock/exynos5410-clock.txt new file +37 -0
new file mode 100644
index 0000000..a462da231
@@ -0,0 +1,37 @@
+* Samsung Exynos5410 Clock Controller
+
+The Exynos5410 clock controller generates and supplies clock to various
+controllers within the Exynos5410 SoC.
+
+Required Properties:
+
+- compatible: should be "samsung,exynos5410-clock"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5410.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+       clock: clock-controller at 0x10010000 {
+               compatible = "samsung,exynos5410-clock";
+               reg = <0x10010000 0x30000>;
+               #clock-cells = <1>;
+       };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+          controller. Refer to the standard clock bindings for information
+          about 'clocks' and 'clock-names' property.
+
+       serial at 12C20000 {
+               compatible = "samsung,exynos4210-uart";
+               reg = <0x12C00000 0x100>;
+               interrupts = <0 51 0>;
+               clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+               clock-names = "uart", "clk_uart_baud0";
+       };
drivers/clk/samsung/Makefile +1 -0
index 3413380..5a446ca 100644
@@ -5,6 +5,7 @@
 obj-$(CONFIG_COMMON_CLK)       += clk.o clk-pll.o
 obj-$(CONFIG_ARCH_EXYNOS4)     += clk-exynos4.o
 obj-$(CONFIG_SOC_EXYNOS5250)   += clk-exynos5250.o
+obj-$(CONFIG_SOC_EXYNOS5410)   += clk-exynos5410.o
 obj-$(CONFIG_SOC_EXYNOS5420)   += clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)   += clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)      += clk-exynos-audss.o
drivers/clk/samsung/clk-exynos5410.c new file +251 -0
new file mode 100644
index 0000000..c5eba08
@@ -0,0 +1,251 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Tarek Dakhran <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5410 SoC.
+*/
+
+#include <dt-bindings/clock/exynos5410.h>
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk.h"
+
+#define APLL_LOCK               0x0
+#define APLL_CON0               0x100
+#define CPLL_LOCK               0x10020
+#define CPLL_CON0               0x10120
+#define MPLL_LOCK               0x4000
+#define MPLL_CON0               0x4100
+#define BPLL_LOCK               0x20010
+#define BPLL_CON0               0x20110
+#define KPLL_LOCK               0x28000
+#define KPLL_CON0               0x28100
+
+#define SRC_CPU                        0x200
+#define DIV_CPU0               0x500
+#define SRC_CPERI1             0x4204
+#define DIV_TOP0               0x10510
+#define DIV_TOP1               0x10514
+#define DIV_FSYS1              0x1054c
+#define DIV_FSYS2              0x10550
+#define DIV_PERIC0             0x10558
+#define SRC_TOP0               0x10210
+#define SRC_TOP1               0x10214
+#define SRC_TOP2               0x10218
+#define SRC_FSYS               0x10244
+#define SRC_PERIC0             0x10250
+#define SRC_MASK_FSYS          0x10340
+#define SRC_MASK_PERIC0                0x10350
+#define GATE_BUS_FSYS0         0x10740
+#define GATE_IP_FSYS           0x10944
+#define GATE_IP_PERIC          0x10950
+#define GATE_IP_PERIS          0x10960
+#define SRC_CDREX              0x20200
+#define SRC_KFC                        0x28200
+#define DIV_KFC0               0x28500
+
+/* list of PLLs */
+enum exynos5410_plls {
+       apll, cpll, mpll,
+       bpll, kpll,
+       nr_plls                 /* number of PLLs */
+};
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long exynos5410_clk_regs[] __initdata = {
+       SRC_CPU,
+       DIV_CPU0,
+       SRC_CPERI1,
+       DIV_TOP0,
+       DIV_TOP1,
+       DIV_FSYS1,
+       DIV_FSYS2,
+       DIV_PERIC0,
+       SRC_TOP0,
+       SRC_TOP1,
+       SRC_TOP2,
+       SRC_FSYS,
+       SRC_PERIC0,
+       SRC_MASK_FSYS,
+       SRC_MASK_PERIC0,
+       GATE_BUS_FSYS0,
+       GATE_IP_FSYS,
+       GATE_IP_PERIC,
+       GATE_IP_PERIS,
+       SRC_CDREX,
+       SRC_KFC,
+       DIV_KFC0,
+};
+
+/* list of all parent clocks */
+PNAME(apll_p)          = { "fin_pll", "fout_apll", };
+PNAME(bpll_p)          = { "fin_pll", "fout_bpll", };
+PNAME(cpll_p)          = { "fin_pll", "fout_cpll" };
+PNAME(mpll_p)          = { "fin_pll", "fout_mpll", };
+PNAME(kpll_p)          = { "fin_pll", "fout_kpll", };
+
+PNAME(mout_cpu_p)      = { "mout_apll", "sclk_mpll", };
+PNAME(mout_kfc_p)      = { "mout_kpll", "sclk_mpll", };
+
+PNAME(mpll_user_p)     = { "fin_pll", "sclk_mpll", };
+PNAME(bpll_user_p)     = { "fin_pll", "sclk_bpll", };
+PNAME(mpll_bpll_p)     = { "sclk_mpll_muxed", "sclk_bpll_muxed", };
+
+PNAME(group2_p)                = { "fin_pll", "fin_pll", "none", "none",
+                       "none", "none", "sclk_mpll_bpll",
+                        "none", "none", "sclk_cpll" };
+
+/* fixed rate clocks generated outside the soc */
+static struct samsung_fixed_rate_clock exynos5410_frt_ext_clks[] __initdata = {
+       FRATE(CLK_FIN_PLL, "fin_pll", NULL, CLK_IS_ROOT, 0),
+};
+
+static struct samsung_mux_clock exynos5410_mux_clks[] __initdata = {
+       MUX(0, "mout_apll", apll_p, SRC_CPU, 0, 1),
+       MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
+
+       MUX(0, "mout_kpll", kpll_p, SRC_KFC, 0, 1),
+       MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1),
+
+       MUX(0, "sclk_mpll", mpll_p, SRC_CPERI1, 8, 1),
+       MUX(0, "sclk_mpll_muxed", mpll_user_p, SRC_TOP2, 20, 1),
+
+       MUX(0, "sclk_bpll", bpll_p, SRC_CDREX, 0, 1),
+       MUX(0, "sclk_bpll_muxed", bpll_user_p, SRC_TOP2, 24, 1),
+
+       MUX(0, "sclk_cpll", cpll_p, SRC_TOP2, 8, 1),
+
+       MUX(0, "sclk_mpll_bpll", mpll_bpll_p, SRC_TOP1, 20, 1),
+
+       MUX(0, "mout_mmc0", group2_p, SRC_FSYS, 0, 4),
+       MUX(0, "mout_mmc1", group2_p, SRC_FSYS, 4, 4),
+       MUX(0, "mout_mmc2", group2_p, SRC_FSYS, 8, 4),
+
+       MUX(0, "mout_uart0", group2_p, SRC_PERIC0, 0, 4),
+       MUX(0, "mout_uart1", group2_p, SRC_PERIC0, 4, 4),
+       MUX(0, "mout_uart2", group2_p, SRC_PERIC0, 8, 4),
+
+       MUX(0, "mout_aclk200", mpll_bpll_p, SRC_TOP0, 12, 1),
+       MUX(0, "mout_aclk400", mpll_bpll_p, SRC_TOP0, 20, 1),
+};
+
+static struct samsung_div_clock exynos5410_div_clks[] __initdata = {
+       DIV(0, "div_arm", "mout_cpu", DIV_CPU0, 0, 3),
+       DIV(0, "div_arm2", "div_arm", DIV_CPU0, 28, 3),
+
+       DIV(0, "div_acp", "div_arm2", DIV_CPU0, 8, 3),
+       DIV(0, "div_cpud", "div_arm2", DIV_CPU0, 4, 3),
+       DIV(0, "div_atb", "div_arm2", DIV_CPU0, 16, 3),
+       DIV(0, "pclk_dbg", "div_arm2", DIV_CPU0, 20, 3),
+
+       DIV(0, "div_kfc", "mout_kfc", DIV_KFC0, 0, 3),
+       DIV(0, "div_aclk", "div_kfc", DIV_KFC0, 4, 3),
+       DIV(0, "div_pclk", "div_kfc", DIV_KFC0, 20, 3),
+
+       DIV(0, "aclk66_pre", "sclk_mpll_muxed", DIV_TOP1, 24, 3),
+       DIV(0, "aclk66", "aclk66_pre", DIV_TOP0, 0, 3),
+
+       DIV(0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+       DIV(0, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
+       DIV(0, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
+
+       DIV_F(0, "div_mmc_pre0", "div_mmc0",
+                       DIV_FSYS1, 8, 8, CLK_SET_RATE_PARENT, 0),
+       DIV_F(0, "div_mmc_pre1", "div_mmc1",
+                       DIV_FSYS1, 24, 8, CLK_SET_RATE_PARENT, 0),
+       DIV_F(0, "div_mmc_pre2", "div_mmc2",
+                       DIV_FSYS2, 8, 8, CLK_SET_RATE_PARENT, 0),
+
+       DIV(0, "div_uart0", "mout_uart0", DIV_PERIC0, 0, 4),
+       DIV(0, "div_uart1", "mout_uart1", DIV_PERIC0, 4, 4),
+       DIV(0, "div_uart2", "mout_uart2", DIV_PERIC0, 8, 4),
+       DIV(0, "div_uart3", "mout_uart3", DIV_PERIC0, 12, 4),
+
+       DIV(0, "aclk200", "mout_aclk200", DIV_TOP0, 12, 3),
+       DIV(0, "aclk400", "mout_aclk400", DIV_TOP0, 24, 3),
+};
+
+static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
+       GATE(CLK_MCT, "mct", "aclk66", GATE_IP_PERIS, 18, 0, 0),
+
+       GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc_pre0",
+                       SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
+       GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc_pre1",
+                       SRC_MASK_FSYS, 4, CLK_SET_RATE_PARENT, 0),
+       GATE(CLK_SCLK_MMC2, "sclk_mmc2", "div_mmc_pre2",
+                       SRC_MASK_FSYS, 8, CLK_SET_RATE_PARENT, 0),
+
+       GATE(CLK_MMC0, "sdmmc0", "aclk200", GATE_BUS_FSYS0, 12, 0, 0),
+       GATE(CLK_MMC1, "sdmmc1", "aclk200", GATE_BUS_FSYS0, 13, 0, 0),
+       GATE(CLK_MMC2, "sdmmc2", "aclk200", GATE_BUS_FSYS0, 14, 0, 0),
+
+       GATE(CLK_UART0, "uart0", "aclk66", GATE_IP_PERIC, 0, 0, 0),
+       GATE(CLK_UART1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0),
+       GATE(CLK_UART2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0),
+
+       GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
+                       SRC_MASK_PERIC0, 0, CLK_SET_RATE_PARENT, 0),
+       GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
+                       SRC_MASK_PERIC0, 4, CLK_SET_RATE_PARENT, 0),
+       GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
+                       SRC_MASK_PERIC0, 8, CLK_SET_RATE_PARENT, 0),
+};
+
+static struct samsung_pll_clock exynos5410_plls[nr_plls] __initdata = {
+       [apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
+               APLL_CON0, NULL),
+       [cpll] = PLL(pll_35xx, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK,
+               CPLL_CON0, NULL),
+       [mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll", MPLL_LOCK,
+               MPLL_CON0, NULL),
+       [bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll", BPLL_LOCK,
+               BPLL_CON0, NULL),
+       [kpll] = PLL(pll_35xx, CLK_FOUT_KPLL, "fout_kpll", "fin_pll", KPLL_LOCK,
+               KPLL_CON0, NULL),
+};
+
+static struct of_device_id ext_clk_match[] __initdata = {
+       { .compatible = "samsung,clock-oscclk", .data = (void *)0, },
+       { },
+};
+
+/* register exynos5410 clocks */
+static void __init exynos5410_clk_init(struct device_node *np)
+{
+       void __iomem *reg_base;
+
+       reg_base = of_iomap(np, 0);
+       if (!reg_base)
+               panic("%s: failed to map registers\n", __func__);
+
+       samsung_clk_init(np, reg_base, CLK_NR_CLKS,
+                       exynos5410_clk_regs, ARRAY_SIZE(exynos5410_clk_regs),
+                       NULL, 0);
+       samsung_clk_of_register_fixed_ext(exynos5410_frt_ext_clks,
+                       ARRAY_SIZE(exynos5410_frt_ext_clks),
+                       ext_clk_match);
+       samsung_clk_register_pll(exynos5410_plls, ARRAY_SIZE(exynos5410_plls),
+                                       reg_base);
+
+       samsung_clk_register_mux(exynos5410_mux_clks,
+                       ARRAY_SIZE(exynos5410_mux_clks));
+       samsung_clk_register_div(exynos5410_div_clks,
+                       ARRAY_SIZE(exynos5410_div_clks));
+       samsung_clk_register_gate(exynos5410_gate_clks,
+                       ARRAY_SIZE(exynos5410_gate_clks));
+
+       pr_debug("Exynos5410: clock setup completed.\n");
+}
+CLK_OF_DECLARE(exynos5410_clk, "samsung,exynos5410-clock", exynos5410_clk_init);
include/dt-bindings/clock/exynos5410.h new file +175 -1
new file mode 100644
index 0000000..9b4a58b
@@ -0,0 +1,175 @@
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS_5410_H
+#define _DT_BINDINGS_CLOCK_EXYNOS_5410_H
+
+/* core clocks */
+#define CLK_FIN_PLL 1
+#define CLK_FOUT_APLL 2
+#define CLK_FOUT_CPLL 3
+#define CLK_FOUT_DPLL 4
+#define CLK_FOUT_EPLL 5
+#define CLK_FOUT_RPLL 6
+#define CLK_FOUT_IPLL 7
+#define CLK_FOUT_SPLL 8
+#define CLK_FOUT_VPLL 9
+#define CLK_FOUT_MPLL 10
+#define CLK_FOUT_BPLL 11
+#define CLK_FOUT_KPLL 12
+
+/* gate for special clocks (sclk) */
+#define CLK_SCLK_UART0 128
+#define CLK_SCLK_UART1 129
+#define CLK_SCLK_UART2 130
+#define CLK_SCLK_UART3 131
+#define CLK_SCLK_MMC0 132
+#define CLK_SCLK_MMC1 133
+#define CLK_SCLK_MMC2 134
+#define CLK_SCLK_SPI0 135
+#define CLK_SCLK_SPI1 136
+#define CLK_SCLK_SPI2 137
+#define CLK_SCLK_I2S1 138
+#define CLK_SCLK_I2S2 139
+#define CLK_SCLK_PCM1 140
+#define CLK_SCLK_PCM2 141
+#define CLK_SCLK_SPDIF 142
+#define CLK_SCLK_HDMI 143
+#define CLK_SCLK_PIXEL 144
+#define CLK_SCLK_DP1 145
+#define CLK_SCLK_MIPI1 146
+#define CLK_SCLK_FIMD1 147
+#define CLK_SCLK_MAUDIO0 148
+#define CLK_SCLK_MAUPCM0 149
+#define CLK_SCLK_USBD300 150
+#define CLK_SCLK_USBD301 151
+#define CLK_SCLK_USBPHY300 152
+#define CLK_SCLK_USBPHY301 153
+#define CLK_SCLK_UNIPRO 154
+#define CLK_SCLK_PWM 155
+#define CLK_SCLK_GSCL_WA 156
+#define CLK_SCLK_GSCL_WB 157
+#define CLK_SCLK_HDMIPHY 158
+
+/* gate clocks */
+#define CLK_ACLK66_PERIC 256
+#define CLK_UART0 257
+#define CLK_UART1 258
+#define CLK_UART2 259
+#define CLK_UART3 260
+#define CLK_I2C0 261
+#define CLK_I2C1 262
+#define CLK_I2C2 263
+#define CLK_I2C3 264
+#define CLK_I2C4 265
+#define CLK_I2C5 266
+#define CLK_I2C6 267
+#define CLK_I2C7 268
+#define CLK_I2C_HDMI 269
+#define CLK_TSADC 270
+#define CLK_SPI0 271
+#define CLK_SPI1 272
+#define CLK_SPI2 273
+#define CLK_KEYIF 274
+#define CLK_I2S1 275
+#define CLK_I2S2 276
+#define CLK_PCM1 277
+#define CLK_PCM2 278
+#define CLK_PWM 279
+#define CLK_SPDIF 280
+#define CLK_I2C8 281
+#define CLK_I2C9 282
+#define CLK_I2C10 283
+#define CLK_ACLK66_PSGEN 300
+#define CLK_CHIPID 301
+#define CLK_SYSREG 302
+#define CLK_TZPC0 303
+#define CLK_TZPC1 304
+#define CLK_TZPC2 305
+#define CLK_TZPC3 306
+#define CLK_TZPC4 307
+#define CLK_TZPC5 308
+#define CLK_TZPC6 309
+#define CLK_TZPC7 310
+#define CLK_TZPC8 311
+#define CLK_TZPC9 312
+#define CLK_HDMI_CEC 313
+#define CLK_SECKEY 314
+#define CLK_MCT 315
+#define CLK_WDT 316
+#define CLK_RTC 317
+#define CLK_TMU 318
+#define CLK_TMU_GPU 319
+#define CLK_PCLK66_GPIO 330
+#define CLK_ACLK200_FSYS2 350
+#define CLK_MMC0 351
+#define CLK_MMC1 352
+#define CLK_MMC2 353
+#define CLK_SROMC 354
+#define CLK_UFS 355
+#define CLK_ACLK200_FSYS 360
+#define CLK_TSI 361
+#define CLK_PDMA0 362
+#define CLK_PDMA1 363
+#define CLK_RTIC 364
+#define CLK_USBH20 365
+#define CLK_USBD300 366
+#define CLK_USBD301 367
+#define CLK_ACLK400_MSCL 380
+#define CLK_MSCL0 381
+#define CLK_MSCL1 382
+#define CLK_MSCL2 383
+#define CLK_SMMU_MSCL0 384
+#define CLK_SMMU_MSCL1 385
+#define CLK_SMMU_MSCL2 386
+#define CLK_ACLK333 400
+#define CLK_MFC 401
+#define CLK_SMMU_MFCL 402
+#define CLK_SMMU_MFCR 403
+#define CLK_ACLK200_DISP1 410
+#define CLK_DSIM1 411
+#define CLK_DP1 412
+#define CLK_HDMI 413
+#define CLK_ACLK300_DISP1 420
+#define CLK_FIMD1 421
+#define CLK_SMMU_FIMD1 422
+#define CLK_ACLK166 430
+#define CLK_MIXER 431
+#define CLK_ACLK266 440
+#define CLK_ROTATOR 441
+#define CLK_MDMA1 442
+#define CLK_SMMU_ROTATOR 443
+#define CLK_SMMU_MDMA1 444
+#define CLK_ACLK300_JPEG 450
+#define CLK_JPEG 451
+#define CLK_JPEG2 452
+#define CLK_SMMU_JPEG 453
+#define CLK_ACLK300_GSCL 460
+#define CLK_SMMU_GSCL0 461
+#define CLK_SMMU_GSCL1 462
+#define CLK_GSCL_WA 463
+#define CLK_GSCL_WB 464
+#define CLK_GSCL0 465
+#define CLK_GSCL1 466
+#define CLK_CLK_3AA 467
+#define CLK_ACLK266_G2D 470
+#define CLK_SSS 471
+#define CLK_SLIM_SSS 472
+#define CLK_MDMA0 473
+#define CLK_ACLK333_G2D 480
+#define CLK_G2D 481
+#define CLK_ACLK333_432_GSCL 490
+#define CLK_SMMU_3AA 491
+#define CLK_SMMU_FIMCL0 492
+#define CLK_SMMU_FIMCL1 493
+#define CLK_SMMU_FIMCL3 494
+#define CLK_FIMC_LITE3 495
+#define CLK_ACLK_G3D 500
+#define CLK_G3D 501
+#define CLK_SMMU_MIXER 502
+
+/* mux clocks */
+#define CLK_MOUT_HDMI 640
+
+/* divider clocks */
+#define CLK_DOUT_PIXEL 768
+#define CLK_NR_CLKS 769
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS_5410_H */
--
Quoted 1 line

1.8.1.5

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

#9 lore raw

Re: [PATCH v2 2/4] clk: exynos5410: register clocks using common clock framework

In reply to Vyacheslav Tyrtov

Hi,

Quoted 7 lines · On Monday 14 of October 2013 19:08:23 Vyacheslav Tyrtov wrote:

From: Tarek Dakhran <[email protected]>

The EXYNOS5410 clocks are statically listed and registered using the Samsung specific common clock helper functions.

Quoted 10 lines
---
 .../devicetree/bindings/clock/exynos5410-clock.txt |  37 +++
 drivers/clk/samsung/Makefile                       |   1 +
 drivers/clk/samsung/clk-exynos5410.c               | 251
+++++++++++++++++++++ include/dt-bindings/clock/exynos5410.h           
 | 175 ++++++++++++++ 4 files changed, 464 insertions(+)
 create mode 100644
Documentation/devicetree/bindings/clock/exynos5410-clock.txt create
mode 100644 drivers/clk/samsung/clk-exynos5410.c
 create mode 100644 include/dt-bindings/clock/exynos5410.h

The driver looks pretty good now, thanks for addressing my comments to previous version. There are still few issues remaining, though. Please see my comments inline.

[snip]

Quoted 5 lines
(quoted diff) +0 -0

b/drivers/clk/samsung/clk-exynos5410.c new file mode 100644 index 0000000..c5eba08

drivers/clk/samsung/clk-exynos5410.c new file +0 -0

[snip]

drivers/clk/samsung/clk-exynos5410.c line 222

Quoted 4 lines
drivers/clk/samsung/clk-exynos5410.c new file +4 -0
+static struct of_device_id ext_clk_match[] __initdata = {
+	{ .compatible = "samsung,clock-oscclk", .data = (void *)0, },
+	{ },
+};

I don't see anything in binding documentation mentioning this compatible value. Anyway, since there is already a generic binding for fixed rate clocks, this shouldn't be needed at all.

drivers/clk/samsung/clk-exynos5410.c

Quoted 12 lines
drivers/clk/samsung/clk-exynos5410.c new file +12 -0
+
+/* register exynos5410 clocks */
+static void __init exynos5410_clk_init(struct device_node *np)
+{
+	void __iomem *reg_base;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base)
+		panic("%s: failed to map registers\n", __func__);
+
+	samsung_clk_init(np, reg_base, CLK_NR_CLKS,
+			exynos5410_clk_regs, 

ARRAY_SIZE(exynos5410_clk_regs),

drivers/clk/samsung/clk-exynos5410.c line 238

Quoted 4 lines
drivers/clk/samsung/clk-exynos5410.c new file +4 -0
+			NULL, 0);
+	samsung_clk_of_register_fixed_ext(exynos5410_frt_ext_clks,
+			ARRAY_SIZE(exynos5410_frt_ext_clks),
+			ext_clk_match);

This call could be dropped after moving to generic fixed rate clock bindings.

Best regards,
Tomasz

#10 lore raw

Re: [PATCH v2 2/4] clk: exynos5410: register clocks using common clock framework

Hi,

Quoted 59 lines · Tomasz Figa

Hi,

Quoted 11 lines · On Monday 14 of October 2013 19:08:23 Vyacheslav Tyrtov wrote:

From: Tarek Dakhran <[email protected]>

The EXYNOS5410 clocks are statically listed and registered using the Samsung specific common clock helper functions.

---
  .../devicetree/bindings/clock/exynos5410-clock.txt |  37 +++
  drivers/clk/samsung/Makefile                       |   1 +
  drivers/clk/samsung/clk-exynos5410.c               | 251
Quoted 6 lines

+++++++++++++++++++++ include/dt-bindings/clock/exynos5410.h
| 175 ++++++++++++++ 4 files changed, 464 insertions(+) create mode 100644
Documentation/devicetree/bindings/clock/exynos5410-clock.txt create mode 100644 drivers/clk/samsung/clk-exynos5410.c
create mode 100644 include/dt-bindings/clock/exynos5410.h

The driver looks pretty good now, thanks for addressing my comments to previous version. There are still few issues remaining, though. Please see my comments inline.

[snip]

Quoted 5 lines
(quoted diff) +0 -0

b/drivers/clk/samsung/clk-exynos5410.c new file mode 100644 index 0000000..c5eba08

drivers/clk/samsung/clk-exynos5410.c new file +0 -0

[snip]

drivers/clk/samsung/clk-exynos5410.c line 222

Quoted 4 lines
drivers/clk/samsung/clk-exynos5410.c new file +4 -0
+static struct of_device_id ext_clk_match[] __initdata = {
+	{ .compatible = "samsung,clock-oscclk", .data = (void *)0, },
+	{ },
+};

I don't see anything in binding documentation mentioning this compatible value. Anyway, since there is already a generic binding for fixed rate clocks, this shouldn't be needed at all.

drivers/clk/samsung/clk-exynos5410.c

Quoted 12 lines
drivers/clk/samsung/clk-exynos5410.c new file +12 -0
+
+/* register exynos5410 clocks */
+static void __init exynos5410_clk_init(struct device_node *np)
+{
+	void __iomem *reg_base;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base)
+		panic("%s: failed to map registers\n", __func__);
+
+	samsung_clk_init(np, reg_base, CLK_NR_CLKS,
+			exynos5410_clk_regs,

ARRAY_SIZE(exynos5410_clk_regs),

drivers/clk/samsung/clk-exynos5410.c line 238

Quoted 4 lines
drivers/clk/samsung/clk-exynos5410.c new file +4 -0
+			NULL, 0);
+	samsung_clk_of_register_fixed_ext(exynos5410_frt_ext_clks,
+			ARRAY_SIZE(exynos5410_frt_ext_clks),
+			ext_clk_match);

This call could be dropped after moving to generic fixed rate clock bindings.

Quoted 2 lines

Best regards,
Tomasz

Already done. Will be added in patch v3.

Thank you for comments, Tomasz.

Best regards,
Tarek Dakhran

#11 lore raw

PATCH v2 3/4 ARM: EXYNOS: add Exynos Dual Cluster Support

In reply to Vyacheslav Tyrtov

From: Tarek Dakhran <[email protected]>

Add EDCS(Exynos Dual Cluster Support) for Samsung Exynos5410 SoC. This enables all 8 cores, 4 x A7 and 4 x A15 run at the same time.

---
 arch/arm/mach-exynos/Makefile |   2 +
 arch/arm/mach-exynos/edcs.c   | 270 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 272 insertions(+)
 create mode 100644 arch/arm/mach-exynos/edcs.c
arch/arm/mach-exynos/Makefile +2 -0
index 5369615..ba6efdb 100644
@@ -34,3 +34,5 @@ AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
 
 obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
 obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o
+
+obj-$(CONFIG_SOC_EXYNOS5410)		+= edcs.o
arch/arm/mach-exynos/edcs.c new file +270 -0

270 lines not on this page · raw message

Signature · 1 line
1.8.1.5
#12 lore raw

Re: [PATCH v2 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support

Quoted 4 lines · Vyacheslav Tyrtov

From: Tarek Dakhran <[email protected]>

Add EDCS(Exynos Dual Cluster Support) for Samsung Exynos5410 SoC. This enables all 8 cores, 4 x A7 and 4 x A15 run at the same time.

IIUC, the 5410 has a CCI-400 bug preventing to use the two clusters at the same time. Right ? Could you explain how you fixed it ?

Quoted 224 lines
---
  arch/arm/mach-exynos/Makefile |   2 +
  arch/arm/mach-exynos/edcs.c   | 270 ++++++++++++++++++++++++++++++++++++++++++
  2 files changed, 272 insertions(+)

create mode 100644 arch/arm/mach-exynos/edcs.c

arch/arm/mach-exynos/Makefile +2 -0
index 5369615..ba6efdb 100644
@@ -34,3 +34,5 @@ AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
 
  obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
  obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o
+
+obj-$(CONFIG_SOC_EXYNOS5410)		+= edcs.o
arch/arm/mach-exynos/edcs.c new file +200 -0
new file mode 100644
index 0000000..e304bd9
@@ -0,0 +1,270 @@
+/*
+ * arch/arm/mach-exynos/edcs.c - exynos dual cluster power management support
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Tarek Dakhran <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * EDCS(exynos dual cluster support) for Exynos5410 SoC.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+
+#include <asm/mcpm.h>
+#include <asm/proc-fns.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+
+#include <linux/arm-cci.h>
+#include <mach/regs-pmu.h>
+
+#define EDCS_CPUS_PER_CLUSTER	4
+#define EDCS_CLUSTERS		2
+
+/* Exynos5410 power management registers */
+#define EDCS_CORE_CONFIGURATION(_nr)	(S5P_ARM_CORE0_CONFIGURATION	\
+						+ ((_nr) * 0x80))
+#define EDCS_CORE_STATUS(_nr)		(EDCS_CORE_CONFIGURATION(_nr) + 0x4)
+#define EDCS_CORE_OPTION(_nr)		(EDCS_CORE_CONFIGURATION(_nr) + 0x8)
+
+#define REG_CPU_STATE_ADDR0		(S5P_VA_SYSRAM_NS + 0x28)
+#define REG_CPU_STATE_ADDR(_nr)		(REG_CPU_STATE_ADDR0 +	\
+						 _nr * EDCS_CPUS_PER_CLUSTER)
+
+static arch_spinlock_t edcs_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+
+static int edcs_use_count[EDCS_CPUS_PER_CLUSTER][EDCS_CLUSTERS];
+static int core_count[EDCS_CLUSTERS];
+
+static void exynos_core_power_control(unsigned int cpu, unsigned int cluster,
+				bool enable)
+{
+	unsigned int offset = cluster * EDCS_CPUS_PER_CLUSTER + cpu;
+	int value = enable ? S5P_CORE_LOCAL_PWR_EN : 0;
+
+	if ((__raw_readl(EDCS_CORE_STATUS(offset)) & 0x3) != value)
+		__raw_writel(value, EDCS_CORE_CONFIGURATION(offset));
+}
+
+static void exynos_core_power_up(unsigned int cpu, unsigned int cluster)
+{
+	exynos_core_power_control(cpu, cluster, true);
+}
+
+static void exynos_core_power_down(unsigned int cpu, unsigned int cluster)
+{
+	exynos_core_power_control(cpu, cluster, false);
+}
+
+void set_boot_flag(unsigned int cpu, unsigned int mode)
+{
+	__raw_writel(mode, REG_CPU_STATE_ADDR(cpu));
+}
+
+static int exynos_power_up(unsigned int cpu, unsigned int cluster)
+{
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EDCS_CPUS_PER_CLUSTER || cluster >= EDCS_CLUSTERS);
+
+	local_irq_disable();
+	arch_spin_lock(&edcs_lock);
+
+	edcs_use_count[cpu][cluster]++;
+	if (edcs_use_count[cpu][cluster] == 1) {
+		++core_count[cluster];
+		set_boot_flag(cpu, 0x2);
+		exynos_core_power_up(cpu, cluster);
+	} else if (edcs_use_count[cpu][cluster] != 2) {
+		/*
+		 * The only possible values are:
+		 * 0 = CPU down
+		 * 1 = CPU (still) up
+		 * 2 = CPU requested to be up before it had a chance
+		 *     to actually make itself down.
+		 * Any other value is a bug.
+		 */
+		BUG();
+	}
+
+	arch_spin_unlock(&edcs_lock);
+	local_irq_enable();
+
+	return 0;
+}
+static void exynos_power_down(void)
+{
+	unsigned int mpidr, cpu, cluster;
+	bool last_man = false, skip_wfi = false;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EDCS_CPUS_PER_CLUSTER  || cluster >= EDCS_CLUSTERS);
+
+	__mcpm_cpu_going_down(cpu, cluster);
+
+	arch_spin_lock(&edcs_lock);
+	BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
+	edcs_use_count[cpu][cluster]--;
+	if (edcs_use_count[cpu][cluster] == 0) {
+		--core_count[cluster];
+		if (core_count[cluster] == 0)
+			last_man = true;
+	} else if (edcs_use_count[cpu][cluster] == 1) {
+		/*
+		 * A power_up request went ahead of us.
+		 * Even if we do not want to shut this CPU down,
+		 * the caller expects a certain state as if the WFI
+		 * was aborted.  So let's continue with cache cleaning.
+		 */
+		skip_wfi = true;
+	} else
+		BUG();
+
+	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
+		arch_spin_unlock(&edcs_lock);
+
+		if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) {
+			/*
+			 * On the Cortex-A15 we need to disable
+			 * L2 prefetching before flushing the cache.
+			 */
+			asm volatile(
+			"mcr	p15, 1, %0, c15, c0, 3\n\t"
+			"isb\n\t"
+			"dsb"
+			: : "r" (0x400));
+		}
+
+		/*
+		 * We need to disable and flush the whole (L1 and L2) cache.
+		 * Let's do it in the safest possible way i.e. with
+		 * no memory access within the following sequence
+		 * including the stack.
+		 *
+		 * Note: fp is preserved to the stack explicitly prior doing
+		 * this since adding it to the clobber list is incompatible
+		 * with having CONFIG_FRAME_POINTER=y.
+		 */
+		asm volatile(
+		"str	fp, [sp, #-4]!\n\t"
+		"mrc	p15, 0, r0, c1, c0, 0	@ get CR\n\t"
+		"bic	r0, r0, #"__stringify(CR_C)"\n\t"
+		"mcr	p15, 0, r0, c1, c0, 0	@ set CR\n\t"
+		"isb\n\t"
+		"bl	v7_flush_dcache_all\n\t"
+		"clrex\n\t"
+		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR\n\t"
+		"bic	r0, r0, #(1 << 6)	@ disable local coherency\n\t"
+		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR\n\t"
+		"isb\n\t"
+		"dsb\n\t"
+		"ldr	fp, [sp], #4"
+		: : : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+			"r9", "r10", "lr", "memory");
+
+		cci_disable_port_by_cpu(mpidr);
+
+		__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+
+	} else {
+		arch_spin_unlock(&edcs_lock);
+		/*
+			* We need to disable and flush only the L1 cache.
+			* Let's do it in the safest possible way as above.
+		*/
+		asm volatile(
+		"str	fp, [sp, #-4]!\n\t"
+		"mrc	p15, 0, r0, c1, c0, 0	@ get CR\n\t"
+		"bic	r0, r0, #"__stringify(CR_C)"\n\t"
+		"mcr	p15, 0, r0, c1, c0, 0	@ set CR\n\t"
+		"isb\n\t"
+		"bl	v7_flush_dcache_louis\n\t"
+		"clrex\n\t"
+		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR\n\t"
+		"bic	r0, r0, #(1 << 6)	@ disable local coherency\n\t"
+		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR\n\t"
+		"isb\n\t"
+		"dsb\n\t"
+		"ldr	fp, [sp], #4"
+		: : : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",

arch/arm/mach-exynos/edcs.c line 210

Quoted 10 lines
arch/arm/mach-exynos/edcs.c new file +10 -0
+		      "r9", "r10", "lr", "memory");
+
+	}
+	__mcpm_cpu_down(cpu, cluster);
+
+	if (!skip_wfi) {
+		exynos_core_power_down(cpu, cluster);
+		wfi();
+	}
+}

I did not looked line by line but these functions looks very similar than the tc2_pm.c's function. no ?

May be some code consolidation could be considered here.

Added Nico and Lorenzo in Cc.

Thanks
-- Daniel

Quoted 60 lines
arch/arm/mach-exynos/edcs.c new file +59 -0
+static const struct mcpm_platform_ops exynos_power_ops = {
+	.power_up	= exynos_power_up,
+	.power_down	= exynos_power_down,
+};
+
+static void __init edcs_data_init(void)
+{
+	unsigned int mpidr, cpu, cluster;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EDCS_CPUS_PER_CLUSTER  || cluster >= EDCS_CLUSTERS);
+	edcs_use_count[cpu][cluster] = 1;
+	++core_count[cluster];
+}
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ */
+static void __naked edcs_power_up_setup(unsigned int affinity_level)
+{
+	asm volatile ("\n"
+	"b	cci_enable_port_for_self");
+}
+
+static int __init edcs_init(void)
+{
+	int ret;
+	struct device_node *node;
+
+	node = of_find_compatible_node(NULL, NULL, "samsung,exynos5410");
+	if (!node)
+		return -ENODEV;
+
+	if (!cci_probed())
+		return -ENODEV;
+
+	/*
+	 * Future entries into the kernel can now go
+	 * through the cluster entry vectors.
+	 */
+	__raw_writel(virt_to_phys(mcpm_entry_point),
+				S5P_VA_SYSRAM_NS + 0x1c);
+
+	edcs_data_init();
+	mcpm_smp_set_ops();
+
+	ret = mcpm_platform_register(&exynos_power_ops);
+	if (!ret) {
+		mcpm_sync_init(edcs_power_up_setup);
+		pr_info("EDCS power management initialized\n");
+	}
+	return ret;
+}
+
+early_initcall(edcs_init);
Signature · 5 lines
  <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#13 lore raw

Re: [PATCH v2 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support

In reply to Vyacheslav Tyrtov

hi Vyacheslav;

Quoted 257 lines

From: Tarek Dakhran <[email protected]>

Add EDCS(Exynos Dual Cluster Support) for Samsung Exynos5410 SoC. This enables all 8 cores, 4 x A7 and 4 x A15 run at the same time.

---
 arch/arm/mach-exynos/Makefile |   2 +
 arch/arm/mach-exynos/edcs.c   | 270 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 272 insertions(+)
 create mode 100644 arch/arm/mach-exynos/edcs.c
arch/arm/mach-exynos/Makefile +2 -0
index 5369615..ba6efdb 100644
@@ -34,3 +34,5 @@ AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
 
 obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
 obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o
+
+obj-$(CONFIG_SOC_EXYNOS5410)		+= edcs.o
arch/arm/mach-exynos/edcs.c new file +228 -0
new file mode 100644
index 0000000..e304bd9
@@ -0,0 +1,270 @@
+/*
+ * arch/arm/mach-exynos/edcs.c - exynos dual cluster power management support
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Tarek Dakhran <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * EDCS(exynos dual cluster support) for Exynos5410 SoC.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+
+#include <asm/mcpm.h>
+#include <asm/proc-fns.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+
+#include <linux/arm-cci.h>
+#include <mach/regs-pmu.h>
+
+#define EDCS_CPUS_PER_CLUSTER	4
+#define EDCS_CLUSTERS		2
+
+/* Exynos5410 power management registers */
+#define EDCS_CORE_CONFIGURATION(_nr)	(S5P_ARM_CORE0_CONFIGURATION	\
+						+ ((_nr) * 0x80))
+#define EDCS_CORE_STATUS(_nr)		(EDCS_CORE_CONFIGURATION(_nr) + 0x4)
+#define EDCS_CORE_OPTION(_nr)		(EDCS_CORE_CONFIGURATION(_nr) + 0x8)
+
+#define REG_CPU_STATE_ADDR0		(S5P_VA_SYSRAM_NS + 0x28)
+#define REG_CPU_STATE_ADDR(_nr)		(REG_CPU_STATE_ADDR0 +	\
+						 _nr * EDCS_CPUS_PER_CLUSTER)
+
+static arch_spinlock_t edcs_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+
+static int edcs_use_count[EDCS_CPUS_PER_CLUSTER][EDCS_CLUSTERS];
+static int core_count[EDCS_CLUSTERS];
+
+static void exynos_core_power_control(unsigned int cpu, unsigned int cluster,
+				bool enable)
+{
+	unsigned int offset = cluster * EDCS_CPUS_PER_CLUSTER + cpu;
+	int value = enable ? S5P_CORE_LOCAL_PWR_EN : 0;
+
+	if ((__raw_readl(EDCS_CORE_STATUS(offset)) & 0x3) != value)
+		__raw_writel(value, EDCS_CORE_CONFIGURATION(offset));
+}
+
+static void exynos_core_power_up(unsigned int cpu, unsigned int cluster)
+{
+	exynos_core_power_control(cpu, cluster, true);
+}
+
+static void exynos_core_power_down(unsigned int cpu, unsigned int cluster)
+{
+	exynos_core_power_control(cpu, cluster, false);
+}
+
+void set_boot_flag(unsigned int cpu, unsigned int mode)
+{
+	__raw_writel(mode, REG_CPU_STATE_ADDR(cpu));
+}
+
+static int exynos_power_up(unsigned int cpu, unsigned int cluster)
+{
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EDCS_CPUS_PER_CLUSTER || cluster >= EDCS_CLUSTERS);
+
+	local_irq_disable();
+	arch_spin_lock(&edcs_lock);
+
+	edcs_use_count[cpu][cluster]++;
+	if (edcs_use_count[cpu][cluster] == 1) {
+		++core_count[cluster];
+		set_boot_flag(cpu, 0x2);
+		exynos_core_power_up(cpu, cluster);
+	} else if (edcs_use_count[cpu][cluster] != 2) {
+		/*
+		 * The only possible values are:
+		 * 0 = CPU down
+		 * 1 = CPU (still) up
+		 * 2 = CPU requested to be up before it had a chance
+		 *     to actually make itself down.
+		 * Any other value is a bug.
+		 */
+		BUG();
+	}
+
+	arch_spin_unlock(&edcs_lock);
+	local_irq_enable();
+
+	return 0;
+}
+static void exynos_power_down(void)
+{
+	unsigned int mpidr, cpu, cluster;
+	bool last_man = false, skip_wfi = false;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EDCS_CPUS_PER_CLUSTER  || cluster >= EDCS_CLUSTERS);
+
+	__mcpm_cpu_going_down(cpu, cluster);
+
+	arch_spin_lock(&edcs_lock);
+	BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
+	edcs_use_count[cpu][cluster]--;
+	if (edcs_use_count[cpu][cluster] == 0) {
+		--core_count[cluster];
+		if (core_count[cluster] == 0)
+			last_man = true;
+	} else if (edcs_use_count[cpu][cluster] == 1) {
+		/*
+		 * A power_up request went ahead of us.
+		 * Even if we do not want to shut this CPU down,
+		 * the caller expects a certain state as if the WFI
+		 * was aborted.  So let's continue with cache cleaning.
+		 */
+		skip_wfi = true;
+	} else
+		BUG();
+
+	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
+		arch_spin_unlock(&edcs_lock);
+
+		if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) {
+			/*
+			 * On the Cortex-A15 we need to disable
+			 * L2 prefetching before flushing the cache.
+			 */
+			asm volatile(
+			"mcr	p15, 1, %0, c15, c0, 3\n\t"
+			"isb\n\t"
+			"dsb"
+			: : "r" (0x400));
+		}
+
+		/*
+		 * We need to disable and flush the whole (L1 and L2) cache.
+		 * Let's do it in the safest possible way i.e. with
+		 * no memory access within the following sequence
+		 * including the stack.
+		 *
+		 * Note: fp is preserved to the stack explicitly prior doing
+		 * this since adding it to the clobber list is incompatible
+		 * with having CONFIG_FRAME_POINTER=y.
+		 */
+		asm volatile(
+		"str	fp, [sp, #-4]!\n\t"
+		"mrc	p15, 0, r0, c1, c0, 0	@ get CR\n\t"
+		"bic	r0, r0, #"__stringify(CR_C)"\n\t"
+		"mcr	p15, 0, r0, c1, c0, 0	@ set CR\n\t"
+		"isb\n\t"
+		"bl	v7_flush_dcache_all\n\t"
+		"clrex\n\t"
+		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR\n\t"
+		"bic	r0, r0, #(1 << 6)	@ disable local coherency\n\t"
+		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR\n\t"
+		"isb\n\t"
+		"dsb\n\t"
+		"ldr	fp, [sp], #4"
+		: : : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+			"r9", "r10", "lr", "memory");
+
+		cci_disable_port_by_cpu(mpidr);
+
+		__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+
+	} else {
+		arch_spin_unlock(&edcs_lock);
+		/*
+			* We need to disable and flush only the L1 cache.
+			* Let's do it in the safest possible way as above.
+		*/
+		asm volatile(
+		"str	fp, [sp, #-4]!\n\t"
+		"mrc	p15, 0, r0, c1, c0, 0	@ get CR\n\t"
+		"bic	r0, r0, #"__stringify(CR_C)"\n\t"
+		"mcr	p15, 0, r0, c1, c0, 0	@ set CR\n\t"
+		"isb\n\t"
+		"bl	v7_flush_dcache_louis\n\t"
+		"clrex\n\t"
+		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR\n\t"
+		"bic	r0, r0, #(1 << 6)	@ disable local coherency\n\t"
+		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR\n\t"
+		"isb\n\t"
+		"dsb\n\t"
+		"ldr	fp, [sp], #4"
+		: : : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+		      "r9", "r10", "lr", "memory");
+
+	}
+	__mcpm_cpu_down(cpu, cluster);
+
+	if (!skip_wfi) {
+		exynos_core_power_down(cpu, cluster);
+		wfi();
+	}
+}
+
+static const struct mcpm_platform_ops exynos_power_ops = {
+	.power_up	= exynos_power_up,
+	.power_down	= exynos_power_down,
+};
+
+static void __init edcs_data_init(void)
+{
+	unsigned int mpidr, cpu, cluster;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EDCS_CPUS_PER_CLUSTER  || cluster >= EDCS_CLUSTERS);
+	edcs_use_count[cpu][cluster] = 1;
+	++core_count[cluster];

arch/arm/mach-exynos/edcs.c line 238

Quoted 10 lines
arch/arm/mach-exynos/edcs.c new file +10 -0
+}
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ */
+static void __naked edcs_power_up_setup(unsigned int affinity_level)
+{
+	asm volatile ("\n"
+	"b	cci_enable_port_for_self");
+}

This code breaks odroid-xu boot with NR_CPUS set to 8. Kernel panics like this:

%< -----------------------------------------------------------------------

[    5.315000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    5.320000] Freeing unused kernel memory: 216K (c049b000 - c04d1000)
[    5.325000] Unhandled fault: imprecise external abort (0x1406)@0x00000000
[    5.340000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
[    5.340000] 
[    5.345000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 200000Hz, actual 200000HZ div = 250)
[    5.355000] CPU: 3 PID: 1 Comm: init Not tainted 3.12.0-rc5-00006-g847e427-dirty #1
[    5.365000] [<c0014d40>] (unwind_backtrace+0x0/0xf8) from [<c00117cc>] (show_stack+0x10/0x14)
[    5.370000] [<c00117cc>] (show_stack+0x10/0x14) from [<c03633ac>] (dump_stack+0x6c/0xac)
[    5.380000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 196079Hz, actual 196078HZ div = 255)
[    5.390000] [<c03633ac>] (dump_stack+0x6c/0xac) from [<c03609fc>] (panic+0x90/0x1e8)
[    5.395000] [<c03609fc>] (panic+0x90/0x1e8) from [<c002048c>] (do_exit+0x780/0x834)
[    5.405000] [<c002048c>] (do_exit+0x780/0x834) from [<c002062c>] (do_group_exit+0x3c/0xb0)
[    5.410000] [<c002062c>] (do_group_exit+0x3c/0xb0) from [<c002ae80>] (get_signal_to_deliver+0x1d4/0x534)
[    5.420000] [<c002ae80>] (get_signal_to_deliver+0x1d4/0x534) from [<c0010d08>] (do_signal+0x100/0x40c)
[    5.430000] [<c0010d08>] (do_signal+0x100/0x40c) from [<c0011348>] (do_work_pending+0x68/0xa8)
[    5.430000] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 50000000Hz, actual 50000000HZ div = 1)
[    5.430000] mmc1: new high speed SDHC card at address b368
[    5.435000] mmcblk0: mmc1:b368 USD   14.9 GiB 
[    5.440000]  mmcblk0: p1 p2 p3 < p5 p6 p7 >
[    5.455000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125)
[    5.475000] [<c0011348>] (do_work_pending+0x68/0xa8) from [<c000e420>] (work_pending+0xc/0x20)
[    5.480000] CPU1: stopping
[    5.480000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.12.0-rc5-00006-g847e427-dirty #1
[    5.480000] [<c0014d40>] (unwind_backtrace+0x0/0xf8) from [<c00117cc>] (show_stack+0x10/0x14)
[    5.480000] [<c00117cc>] (show_stack+0x10/0x14) from [<c03633ac>] (dump_stack+0x6c/0xac)
[    5.480000] [<c03633ac>] (dump_stack+0x6c/0xac) from [<c0013604>] (handle_IPI+0xf8/0x11c)
[    5.480000] [<c0013604>] (handle_IPI+0xf8/0x11c) from [<c000851c>] (gic_handle_irq+0x60/0x68)
[    5.480000] [<c000851c>] (gic_handle_irq+0x60/0x68) from [<c00122c0>] (__irq_svc+0x40/0x70)
[    5.480000] Exception stack(0xef0a7f88 to 0xef0a7fd0)
[    5.480000] 7f80:                   00000001 00000000 008d20ff 00000001 00000000 00000000
[    5.480000] 7fa0: c04d07a0 60000113 010da000 412fc0f3 c15aa7a0 00000000 00000001 ef0a7fd0
[    5.480000] 7fc0: c0072d74 c0072d78 20000113 ffffffff
[    5.480000] [<c00122c0>] (__irq_svc+0x40/0x70) from [<c0072d78>] (rcu_idle_exit+0x68/0xb8)
[    5.480000] [<c0072d78>] (rcu_idle_exit+0x68/0xb8) from [<c00550a4>] (cpu_startup_entry+0x6c/0x148)
[    5.480000] [<c00550a4>] (cpu_startup_entry+0x6c/0x148) from [<400085c4>] (0x400085c4)
[    5.480000] CPU0: stopping
[    5.480000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0-rc5-00006-g847e427-dirty #1
[    5.480000] [<c0014d40>] (unwind_backtrace+0x0/0xf8) from [<c00117cc>] (show_stack+0x10/0x14)
[    5.480000] [<c00117cc>] (show_stack+0x10/0x14) from [<c03633ac>] (dump_stack+0x6c/0xac)
[    5.480000] [<c03633ac>] (dump_stack+0x6c/0xac) from [<c0013604>] (handle_IPI+0xf8/0x11c)
[    5.480000] [<c0013604>] (handle_IPI+0xf8/0x11c) from [<c000851c>] (gic_handle_irq+0x60/0x68)
[    5.480000] [<c000851c>] (gic_handle_irq+0x60/0x68) from [<c00122c0>] (__irq_svc+0x40/0x70)
[    5.480000] Exception stack(0xc04d3f70 to 0xc04d3fb8)
[    5.480000] SMP: failed to stop secondary CPUs
[    5.480000] 3f60:                                     00000000 00000000 00002190 00000000
[    5.480000] 3f80: c04d2000 c050a88f 00000001 c050a88f c04da44c 412fc0f3 c036a960 00000000
[    5.480000] 3fa0: 00000020 c04d3fb8 c000f5d4 c000f5d8 60000113 ffffffff
[    5.480000] [<c00122c0>] (__irq_svc+0x40/0x70) from [<c000f5d8>] (arch_cpu_idle+0x28/0x30)
[    5.480000] [<c000f5d8>] (arch_cpu_idle+0x28/0x30) from [<c0055094>] (cpu_startup_entry+0x5c/0x148)
[    5.480000] [<c0055094>] (cpu_startup_entry+0x5c/0x148) from [<c049ba9c>] (start_kernel+0x32c/0x384)
[    5.480000] CPU2: stopping
[    5.480000] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.12.0-rc5-00006-g847e427-dirty #1
[    5.480000] [<c0014d40>] (unwind_backtrace+0x0/0xf8) from [<c00117cc>] (show_stack+0x10/0x14)
[    5.480000] [<c00117cc>] (show_stack+0x10/0x14) from [<c03633ac>] (dump_stack+0x6c/0xac)
[    5.480000] [<c03633ac>] (dump_stack+0x6c/0xac) from [<c0013604>] (handle_IPI+0xf8/0x11c)
[    5.480000] [<c0013604>] (handle_IPI+0xf8/0x11c) from [<c000851c>] (gic_handle_irq+0x60/0x68)
[    5.480000] [<c000851c>] (gic_handle_irq+0x60/0x68) from [<c00122c0>] (__irq_svc+0x40/0x70)
[    5.480000] Exception stack(0xef0a9fa0 to 0xef0a9fe8)
[    5.480000] 9fa0: 00000002 00000000 008e4858 00000000 ef0a8000 c050a88f 00000001 c050a88f
[    5.480000] 9fc0: c04da44c 412fc0f3 c036a960 00000000 00000001 ef0a9fe8 c000f5d4 c000f5d8
[    5.480000] 9fe0: 60000113 ffffffff
[    5.480000] [<c00122c0>] (__irq_svc+0x40/0x70) from [<c000f5d8>] (arch_cpu_idle+0x28/0x30)
[    5.480000] [<c000f5d8>] (arch_cpu_idle+0x28/0x30) from [<c0055094>] (cpu_startup_entry+0x5c/0x148)
[    5.480000] [<c0055094>] (cpu_startup_entry+0x5c/0x148) from [<400085c4>] (0x400085c4)

%< -----------------------------------------------------------------------

I checked arch/arm/mach-vexpress/tc2_pm.c to see how CCI is enabled there an realized that you should follow same pattern, i.e.:

asm volatile (" \n"

"       cmp     r0, #1 \n"
"       bxne    lr \n"
"       b       cci_enable_port_for_self ");

In this case only one cluster (4 LITTLE cores for Exynos5410) will be initialized@boot time. And no panic.

--
Aliaksei

Quoted 41 lines
arch/arm/mach-exynos/edcs.c new file +32 -0
+
+static int __init edcs_init(void)
+{
+	int ret;
+	struct device_node *node;
+
+	node = of_find_compatible_node(NULL, NULL, "samsung,exynos5410");
+	if (!node)
+		return -ENODEV;
+
+	if (!cci_probed())
+		return -ENODEV;
+
+	/*
+	 * Future entries into the kernel can now go
+	 * through the cluster entry vectors.
+	 */
+	__raw_writel(virt_to_phys(mcpm_entry_point),
+				S5P_VA_SYSRAM_NS + 0x1c);
+
+	edcs_data_init();
+	mcpm_smp_set_ops();
+
+	ret = mcpm_platform_register(&exynos_power_ops);
+	if (!ret) {
+		mcpm_sync_init(edcs_power_up_setup);
+		pr_info("EDCS power management initialized\n");
+	}
+	return ret;
+}
+
+early_initcall(edcs_init);
Signature · 7 lines
1.8.1.5


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#14 lore raw

PATCH v2 3/4 ARM: EXYNOS: add Exynos Dual Cluster Support

Aliaksei,

Quoted 13 lines · On 12/31/1969 07:00 PM, wrote:
Quoted 13 lines

From: Tarek Dakhran <[email protected]>

Add EDCS(Exynos Dual Cluster Support) for Samsung Exynos5410 SoC. This enables all 8 cores, 4 x A7 and 4 x A15 run at the same time.

---
 arch/arm/mach-exynos/Makefile |   2 +
 arch/arm/mach-exynos/edcs.c   | 270 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 272 insertions(+)
 create mode 100644 arch/arm/mach-exynos/edcs.c

[snip]

Quoted 84 lines

arch/arm/mach-exynos/edcs.c line 238

Quoted 9 lines
arch/arm/mach-exynos/edcs.c new file +9 -0
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ */
+static void __naked edcs_power_up_setup(unsigned int affinity_level)
+{
+	asm volatile ("\n"
+	"b	cci_enable_port_for_self");
+}

This code breaks odroid-xu boot with NR_CPUS set to 8. Kernel panics like this:

%< -----------------------------------------------------------------------

[    5.315000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    5.320000] Freeing unused kernel memory: 216K (c049b000 - c04d1000)
[    5.325000] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[    5.340000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
[    5.340000] 
[    5.345000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 200000Hz, actual 200000HZ div = 250)
[    5.355000] CPU: 3 PID: 1 Comm: init Not tainted 3.12.0-rc5-00006-g847e427-dirty #1
[    5.365000] [<c0014d40>] (unwind_backtrace+0x0/0xf8) from [<c00117cc>] (show_stack+0x10/0x14)
[    5.370000] [<c00117cc>] (show_stack+0x10/0x14) from [<c03633ac>] (dump_stack+0x6c/0xac)
[    5.380000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 196079Hz, actual 196078HZ div = 255)
[    5.390000] [<c03633ac>] (dump_stack+0x6c/0xac) from [<c03609fc>] (panic+0x90/0x1e8)
[    5.395000] [<c03609fc>] (panic+0x90/0x1e8) from [<c002048c>] (do_exit+0x780/0x834)
[    5.405000] [<c002048c>] (do_exit+0x780/0x834) from [<c002062c>] (do_group_exit+0x3c/0xb0)
[    5.410000] [<c002062c>] (do_group_exit+0x3c/0xb0) from [<c002ae80>] (get_signal_to_deliver+0x1d4/0x534)
[    5.420000] [<c002ae80>] (get_signal_to_deliver+0x1d4/0x534) from [<c0010d08>] (do_signal+0x100/0x40c)
[    5.430000] [<c0010d08>] (do_signal+0x100/0x40c) from [<c0011348>] (do_work_pending+0x68/0xa8)
[    5.430000] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 50000000Hz, actual 50000000HZ div = 1)
[    5.430000] mmc1: new high speed SDHC card at address b368
[    5.435000] mmcblk0: mmc1:b368 USD   14.9 GiB 
[    5.440000]  mmcblk0: p1 p2 p3 < p5 p6 p7 >
[    5.455000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125)
[    5.475000] [<c0011348>] (do_work_pending+0x68/0xa8) from [<c000e420>] (work_pending+0xc/0x20)
[    5.480000] CPU1: stopping
[    5.480000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.12.0-rc5-00006-g847e427-dirty #1
[    5.480000] [<c0014d40>] (unwind_backtrace+0x0/0xf8) from [<c00117cc>] (show_stack+0x10/0x14)
[    5.480000] [<c00117cc>] (show_stack+0x10/0x14) from [<c03633ac>] (dump_stack+0x6c/0xac)
[    5.480000] [<c03633ac>] (dump_stack+0x6c/0xac) from [<c0013604>] (handle_IPI+0xf8/0x11c)
[    5.480000] [<c0013604>] (handle_IPI+0xf8/0x11c) from [<c000851c>] (gic_handle_irq+0x60/0x68)
[    5.480000] [<c000851c>] (gic_handle_irq+0x60/0x68) from [<c00122c0>] (__irq_svc+0x40/0x70)
[    5.480000] Exception stack(0xef0a7f88 to 0xef0a7fd0)
[    5.480000] 7f80:                   00000001 00000000 008d20ff 00000001 00000000 00000000
[    5.480000] 7fa0: c04d07a0 60000113 010da000 412fc0f3 c15aa7a0 00000000 00000001 ef0a7fd0
[    5.480000] 7fc0: c0072d74 c0072d78 20000113 ffffffff
[    5.480000] [<c00122c0>] (__irq_svc+0x40/0x70) from [<c0072d78>] (rcu_idle_exit+0x68/0xb8)
[    5.480000] [<c0072d78>] (rcu_idle_exit+0x68/0xb8) from [<c00550a4>] (cpu_startup_entry+0x6c/0x148)
[    5.480000] [<c00550a4>] (cpu_startup_entry+0x6c/0x148) from [<400085c4>] (0x400085c4)
[    5.480000] CPU0: stopping
[    5.480000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0-rc5-00006-g847e427-dirty #1
[    5.480000] [<c0014d40>] (unwind_backtrace+0x0/0xf8) from [<c00117cc>] (show_stack+0x10/0x14)
[    5.480000] [<c00117cc>] (show_stack+0x10/0x14) from [<c03633ac>] (dump_stack+0x6c/0xac)
[    5.480000] [<c03633ac>] (dump_stack+0x6c/0xac) from [<c0013604>] (handle_IPI+0xf8/0x11c)
[    5.480000] [<c0013604>] (handle_IPI+0xf8/0x11c) from [<c000851c>] (gic_handle_irq+0x60/0x68)
[    5.480000] [<c000851c>] (gic_handle_irq+0x60/0x68) from [<c00122c0>] (__irq_svc+0x40/0x70)
[    5.480000] Exception stack(0xc04d3f70 to 0xc04d3fb8)
[    5.480000] SMP: failed to stop secondary CPUs
[    5.480000] 3f60:                                     00000000 00000000 00002190 00000000
[    5.480000] 3f80: c04d2000 c050a88f 00000001 c050a88f c04da44c 412fc0f3 c036a960 00000000
[    5.480000] 3fa0: 00000020 c04d3fb8 c000f5d4 c000f5d8 60000113 ffffffff
[    5.480000] [<c00122c0>] (__irq_svc+0x40/0x70) from [<c000f5d8>] (arch_cpu_idle+0x28/0x30)
[    5.480000] [<c000f5d8>] (arch_cpu_idle+0x28/0x30) from [<c0055094>] (cpu_startup_entry+0x5c/0x148)
[    5.480000] [<c0055094>] (cpu_startup_entry+0x5c/0x148) from [<c049ba9c>] (start_kernel+0x32c/0x384)
[    5.480000] CPU2: stopping
[    5.480000] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.12.0-rc5-00006-g847e427-dirty #1
[    5.480000] [<c0014d40>] (unwind_backtrace+0x0/0xf8) from [<c00117cc>] (show_stack+0x10/0x14)
[    5.480000] [<c00117cc>] (show_stack+0x10/0x14) from [<c03633ac>] (dump_stack+0x6c/0xac)
[    5.480000] [<c03633ac>] (dump_stack+0x6c/0xac) from [<c0013604>] (handle_IPI+0xf8/0x11c)
[    5.480000] [<c0013604>] (handle_IPI+0xf8/0x11c) from [<c000851c>] (gic_handle_irq+0x60/0x68)
[    5.480000] [<c000851c>] (gic_handle_irq+0x60/0x68) from [<c00122c0>] (__irq_svc+0x40/0x70)
[    5.480000] Exception stack(0xef0a9fa0 to 0xef0a9fe8)
[    5.480000] 9fa0: 00000002 00000000 008e4858 00000000 ef0a8000 c050a88f 00000001 c050a88f
[    5.480000] 9fc0: c04da44c 412fc0f3 c036a960 00000000 00000001 ef0a9fe8 c000f5d4 c000f5d8
[    5.480000] 9fe0: 60000113 ffffffff
[    5.480000] [<c00122c0>] (__irq_svc+0x40/0x70) from [<c000f5d8>] (arch_cpu_idle+0x28/0x30)
[    5.480000] [<c000f5d8>] (arch_cpu_idle+0x28/0x30) from [<c0055094>] (cpu_startup_entry+0x5c/0x148)
[    5.480000] [<c0055094>] (cpu_startup_entry+0x5c/0x148) from [<400085c4>] (0x400085c4)

%< -----------------------------------------------------------------------

I checked arch/arm/mach-vexpress/tc2_pm.c to see how CCI is enabled there an realized that you should follow same pattern, i.e.:

Quoted 7 lines

asm volatile (" \n"

"       cmp     r0, #1 \n"
"       bxne    lr \n"
"       b       cci_enable_port_for_self ");

In this case only one cluster (4 LITTLE cores for Exynos5410) will be initialized at boot time. And no panic.

After this modification the same crash goes away for me too: Odroid XU+E, 3.12-rc5 + this patchset, exynos_defconfig, exynos5410-smdk5410.dtb.

But, the other four cores fail to come online at boot time and fail when manually brought online 'echo 1 > /sys/devices/system/cpu/cpu4/online'. The write of S5P_CORE_LOCAL_PWR_EN to EDCS_CORE_CONFIGURATION happens but the CPU never reaches mcpm_entry_point.

If I change the above to 'cmp r0, #0' (the A15 cluster?), then I get the same crash as with unconditional call, and _the same_ 4 CPUs online. Does this mean that enabling coherence for the A15 cluster causes the above crash? And, is it true that for the A15 CPUs to wake up and proceed to the entry point coherence must be enabled (or is some other reason preventing them from waking up)?

[    0.045000] CPU: Testing write buffer coherency: ok
[    0.050000] CPU0: update cpu_power 1468
[    0.055000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.060000] Setting up static identity map for 0xc038c4b8 - 0xc038c510
[    0.065000] ARM CCI driver probed
[    0.065000] edcs_init: configuring entry points
[    0.070000] edcs_init: calling data init
[    0.075000] edcs_data_init: cpu 0 cluster 0
[    0.080000] EDCS power management initialized
[    0.115000] exynos_power_up: cpu 1 cluster 0
[    0.115000] exynos_power_up: cpu 1 cluster 0 use count 1
[    0.115000] exynos_core_power_control: changing value to 3
CPU01 cluster00: kernel mcpm_entry_point
CPU01 cluster00: released
[    0.125000] CPU1: Booted secondary processor
[    0.125000] mcpm_cpu_powered_up: up
[    0.160000] CPU1: update cpu_power 1468
[    0.165000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.175000] exynos_power_up: cpu 2 cluster 0
[    0.180000] exynos_power_up: cpu 2 cluster 0 use count 1
[    0.180000] exynos_core_power_control: changing value to 3
CPU02 cluster00: kernel mcpm_entry_point
CPU02 cluster00: released
[    0.190000] CPU2: Booted secondary processor
...
[    0.280000] exynos_power_up: cpu 0 cluster 1
[    0.285000] exynos_power_up: cpu 0 cluster 1 use count 1
[    0.285000] exynos_core_power_control: changing value to 3
[    1.290000] CPU4: failed to come online
[    1.300000] exynos_power_up: cpu 1 cluster 1
[    1.300000] exynos_power_up: cpu 1 cluster 1 use count 1
[    1.300000] exynos_core_power_control: changing value to 3
[    2.305000] CPU5: failed to come online
...
[    4.340000] SMP: Total of 4 processors activated.
[    4.345000] CPU: All CPU(s) started in SVC mode.
#15 lore raw

PATCH v2 3/4 ARM: EXYNOS: add Exynos Dual Cluster Support

Quoted 117 lines · Alexei Colin

Aliaksei,

Quoted 13 lines · On 12/31/1969 07:00 PM, wrote:
Quoted 13 lines

From: Tarek Dakhran <[email protected]>

Add EDCS(Exynos Dual Cluster Support) for Samsung Exynos5410 SoC. This enables all 8 cores, 4 x A7 and 4 x A15 run at the same time.

---
 arch/arm/mach-exynos/Makefile |   2 +
 arch/arm/mach-exynos/edcs.c   | 270 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 272 insertions(+)
 create mode 100644 arch/arm/mach-exynos/edcs.c

[snip]

Quoted 84 lines

arch/arm/mach-exynos/edcs.c line 238

Quoted 9 lines
arch/arm/mach-exynos/edcs.c new file +9 -0
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ */
+static void __naked edcs_power_up_setup(unsigned int affinity_level)
+{
+	asm volatile ("\n"
+	"b	cci_enable_port_for_self");
+}

This code breaks odroid-xu boot with NR_CPUS set to 8. Kernel panics like this:

%< -----------------------------------------------------------------------

[    5.315000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    5.320000] Freeing unused kernel memory: 216K (c049b000 - c04d1000)
[    5.325000] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[    5.340000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
[    5.340000] 
[    5.345000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 200000Hz, actual 200000HZ div = 250)
[    5.355000] CPU: 3 PID: 1 Comm: init Not tainted 3.12.0-rc5-00006-g847e427-dirty #1
[    5.365000] [<c0014d40>] (unwind_backtrace+0x0/0xf8) from [<c00117cc>] (show_stack+0x10/0x14)
[    5.370000] [<c00117cc>] (show_stack+0x10/0x14) from [<c03633ac>] (dump_stack+0x6c/0xac)
[    5.380000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 196079Hz, actual 196078HZ div = 255)
[    5.390000] [<c03633ac>] (dump_stack+0x6c/0xac) from [<c03609fc>] (panic+0x90/0x1e8)
[    5.395000] [<c03609fc>] (panic+0x90/0x1e8) from [<c002048c>] (do_exit+0x780/0x834)
[    5.405000] [<c002048c>] (do_exit+0x780/0x834) from [<c002062c>] (do_group_exit+0x3c/0xb0)
[    5.410000] [<c002062c>] (do_group_exit+0x3c/0xb0) from [<c002ae80>] (get_signal_to_deliver+0x1d4/0x534)
[    5.420000] [<c002ae80>] (get_signal_to_deliver+0x1d4/0x534) from [<c0010d08>] (do_signal+0x100/0x40c)
[    5.430000] [<c0010d08>] (do_signal+0x100/0x40c) from [<c0011348>] (do_work_pending+0x68/0xa8)
[    5.430000] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 50000000Hz, actual 50000000HZ div = 1)
[    5.430000] mmc1: new high speed SDHC card at address b368
[    5.435000] mmcblk0: mmc1:b368 USD   14.9 GiB 
[    5.440000]  mmcblk0: p1 p2 p3 < p5 p6 p7 >
[    5.455000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125)
[    5.475000] [<c0011348>] (do_work_pending+0x68/0xa8) from [<c000e420>] (work_pending+0xc/0x20)
[    5.480000] CPU1: stopping
[    5.480000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.12.0-rc5-00006-g847e427-dirty #1
[    5.480000] [<c0014d40>] (unwind_backtrace+0x0/0xf8) from [<c00117cc>] (show_stack+0x10/0x14)
[    5.480000] [<c00117cc>] (show_stack+0x10/0x14) from [<c03633ac>] (dump_stack+0x6c/0xac)
[    5.480000] [<c03633ac>] (dump_stack+0x6c/0xac) from [<c0013604>] (handle_IPI+0xf8/0x11c)
[    5.480000] [<c0013604>] (handle_IPI+0xf8/0x11c) from [<c000851c>] (gic_handle_irq+0x60/0x68)
[    5.480000] [<c000851c>] (gic_handle_irq+0x60/0x68) from [<c00122c0>] (__irq_svc+0x40/0x70)
[    5.480000] Exception stack(0xef0a7f88 to 0xef0a7fd0)
[    5.480000] 7f80:                   00000001 00000000 008d20ff 00000001 00000000 00000000
[    5.480000] 7fa0: c04d07a0 60000113 010da000 412fc0f3 c15aa7a0 00000000 00000001 ef0a7fd0
[    5.480000] 7fc0: c0072d74 c0072d78 20000113 ffffffff
[    5.480000] [<c00122c0>] (__irq_svc+0x40/0x70) from [<c0072d78>] (rcu_idle_exit+0x68/0xb8)
[    5.480000] [<c0072d78>] (rcu_idle_exit+0x68/0xb8) from [<c00550a4>] (cpu_startup_entry+0x6c/0x148)
[    5.480000] [<c00550a4>] (cpu_startup_entry+0x6c/0x148) from [<400085c4>] (0x400085c4)
[    5.480000] CPU0: stopping
[    5.480000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0-rc5-00006-g847e427-dirty #1
[    5.480000] [<c0014d40>] (unwind_backtrace+0x0/0xf8) from [<c00117cc>] (show_stack+0x10/0x14)
[    5.480000] [<c00117cc>] (show_stack+0x10/0x14) from [<c03633ac>] (dump_stack+0x6c/0xac)
[    5.480000] [<c03633ac>] (dump_stack+0x6c/0xac) from [<c0013604>] (handle_IPI+0xf8/0x11c)
[    5.480000] [<c0013604>] (handle_IPI+0xf8/0x11c) from [<c000851c>] (gic_handle_irq+0x60/0x68)
[    5.480000] [<c000851c>] (gic_handle_irq+0x60/0x68) from [<c00122c0>] (__irq_svc+0x40/0x70)
[    5.480000] Exception stack(0xc04d3f70 to 0xc04d3fb8)
[    5.480000] SMP: failed to stop secondary CPUs
[    5.480000] 3f60:                                     00000000 00000000 00002190 00000000
[    5.480000] 3f80: c04d2000 c050a88f 00000001 c050a88f c04da44c 412fc0f3 c036a960 00000000
[    5.480000] 3fa0: 00000020 c04d3fb8 c000f5d4 c000f5d8 60000113 ffffffff
[    5.480000] [<c00122c0>] (__irq_svc+0x40/0x70) from [<c000f5d8>] (arch_cpu_idle+0x28/0x30)
[    5.480000] [<c000f5d8>] (arch_cpu_idle+0x28/0x30) from [<c0055094>] (cpu_startup_entry+0x5c/0x148)
[    5.480000] [<c0055094>] (cpu_startup_entry+0x5c/0x148) from [<c049ba9c>] (start_kernel+0x32c/0x384)
[    5.480000] CPU2: stopping
[    5.480000] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.12.0-rc5-00006-g847e427-dirty #1
[    5.480000] [<c0014d40>] (unwind_backtrace+0x0/0xf8) from [<c00117cc>] (show_stack+0x10/0x14)
[    5.480000] [<c00117cc>] (show_stack+0x10/0x14) from [<c03633ac>] (dump_stack+0x6c/0xac)
[    5.480000] [<c03633ac>] (dump_stack+0x6c/0xac) from [<c0013604>] (handle_IPI+0xf8/0x11c)
[    5.480000] [<c0013604>] (handle_IPI+0xf8/0x11c) from [<c000851c>] (gic_handle_irq+0x60/0x68)
[    5.480000] [<c000851c>] (gic_handle_irq+0x60/0x68) from [<c00122c0>] (__irq_svc+0x40/0x70)
[    5.480000] Exception stack(0xef0a9fa0 to 0xef0a9fe8)
[    5.480000] 9fa0: 00000002 00000000 008e4858 00000000 ef0a8000 c050a88f 00000001 c050a88f
[    5.480000] 9fc0: c04da44c 412fc0f3 c036a960 00000000 00000001 ef0a9fe8 c000f5d4 c000f5d8
[    5.480000] 9fe0: 60000113 ffffffff
[    5.480000] [<c00122c0>] (__irq_svc+0x40/0x70) from [<c000f5d8>] (arch_cpu_idle+0x28/0x30)
[    5.480000] [<c000f5d8>] (arch_cpu_idle+0x28/0x30) from [<c0055094>] (cpu_startup_entry+0x5c/0x148)
[    5.480000] [<c0055094>] (cpu_startup_entry+0x5c/0x148) from [<400085c4>] (0x400085c4)

%< -----------------------------------------------------------------------

I checked arch/arm/mach-vexpress/tc2_pm.c to see how CCI is enabled there an realized that you should follow same pattern, i.e.:

Quoted 7 lines

asm volatile (" \n"

"       cmp     r0, #1 \n"
"       bxne    lr \n"
"       b       cci_enable_port_for_self ");

In this case only one cluster (4 LITTLE cores for Exynos5410) will be initialized at boot time. And no panic.

After this modification the same crash goes away for me too: Odroid XU+E, 3.12-rc5 + this patchset, exynos_defconfig, exynos5410-smdk5410.dtb.

But, the other four cores fail to come online at boot time and fail when manually brought online 'echo 1 > /sys/devices/system/cpu/cpu4/online'. The write of S5P_CORE_LOCAL_PWR_EN to EDCS_CORE_CONFIGURATION happens but the CPU never reaches mcpm_entry_point.

Quoted 6 lines

If I change the above to 'cmp r0, #0' (the A15 cluster?), then I get the same crash as with unconditional call, and _the same_ 4 CPUs online. Does this mean that enabling coherence for the A15 cluster causes the above crash? And, is it true that for the A15 CPUs to wake up and proceed to the entry point coherence must be enabled (or is some other reason preventing them from waking up)?

Just realized that the argument to power_up_setup is not the cluster but "affinity," which is 1 for clusters and 0 for cores (?). This explains Aliaksei's correction and renders my above experiment pointless.

This code that enables coherency happens much later than mcpm_entry_point. So, this strengthens the hypothesis that CPUs from the other cluster don't come online due to some other reason. Is there an explit "turn on cluster" operation that needs to happen before (or after) the register write in exynos_core_power_control can turn on a core in that cluster?

Quoted 45 lines
[    0.045000] CPU: Testing write buffer coherency: ok
[    0.050000] CPU0: update cpu_power 1468
[    0.055000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.060000] Setting up static identity map for 0xc038c4b8 - 0xc038c510
[    0.065000] ARM CCI driver probed
[    0.065000] edcs_init: configuring entry points
[    0.070000] edcs_init: calling data init
[    0.075000] edcs_data_init: cpu 0 cluster 0
[    0.080000] EDCS power management initialized
[    0.115000] exynos_power_up: cpu 1 cluster 0
[    0.115000] exynos_power_up: cpu 1 cluster 0 use count 1
[    0.115000] exynos_core_power_control: changing value to 3
CPU01 cluster00: kernel mcpm_entry_point
CPU01 cluster00: released
[    0.125000] CPU1: Booted secondary processor
[    0.125000] mcpm_cpu_powered_up: up
[    0.160000] CPU1: update cpu_power 1468
[    0.165000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.175000] exynos_power_up: cpu 2 cluster 0
[    0.180000] exynos_power_up: cpu 2 cluster 0 use count 1
[    0.180000] exynos_core_power_control: changing value to 3
CPU02 cluster00: kernel mcpm_entry_point
CPU02 cluster00: released
[    0.190000] CPU2: Booted secondary processor
...
[    0.280000] exynos_power_up: cpu 0 cluster 1
[    0.285000] exynos_power_up: cpu 0 cluster 1 use count 1
[    0.285000] exynos_core_power_control: changing value to 3
[    1.290000] CPU4: failed to come online
[    1.300000] exynos_power_up: cpu 1 cluster 1
[    1.300000] exynos_power_up: cpu 1 cluster 1 use count 1
[    1.300000] exynos_core_power_control: changing value to 3
[    2.305000] CPU5: failed to come online
...
[    4.340000] SMP: Total of 4 processors activated.
[    4.345000] CPU: All CPU(s) started in SVC mode.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#16 lore raw

PATCH v2 4/4 ARM: dts: Add initial device tree support for EXYNOS5410

In reply to Vyacheslav Tyrtov

From: Tarek Dakhran <[email protected]>

Add initial device tree nodes for EXYNOS5410 SoC and SMDK5410 board.

---
 arch/arm/boot/dts/Makefile                |   1 +
 arch/arm/boot/dts/exynos5410-smdk5410.dts |  65 ++++++++++
 arch/arm/boot/dts/exynos5410.dtsi         | 209 ++++++++++++++++++++++++++++++
 3 files changed, 275 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5410-smdk5410.dts
 create mode 100644 arch/arm/boot/dts/exynos5410.dtsi
arch/arm/boot/dts/Makefile +1 -0
index 802720e..e991739 100644
@@ -63,6 +63,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
+	exynos5410-smdk5410.dtb \
 	exynos5420-smdk5420.dtb \
 	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb
arch/arm/boot/dts/exynos5410-smdk5410.dts new file +65 -0

65 lines not on this page · raw message

arch/arm/boot/dts/exynos5410.dtsi new file +209 -0

209 lines not on this page · raw message

Signature · 1 line
1.8.1.5
Reviewed-by on v2 4/4
#17 lore raw

Re: [PATCH v2 4/4] ARM: dts: Add initial device tree support for EXYNOS5410

Quoted 6 lines · On Monday 14 of October 2013 19:08:25 Vyacheslav Tyrtov wrote:

From: Tarek Dakhran <[email protected]>

Add initial device tree nodes for EXYNOS5410 SoC and SMDK5410 board.

Quoted 7 lines
---
 arch/arm/boot/dts/Makefile                |   1 +
 arch/arm/boot/dts/exynos5410-smdk5410.dts |  65 ++++++++++
 arch/arm/boot/dts/exynos5410.dtsi         | 209
++++++++++++++++++++++++++++++ 3 files changed, 275 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5410-smdk5410.dts
 create mode 100644 arch/arm/boot/dts/exynos5410.dtsi

Best regards,
Tomasz

#18 lore raw
In reply to Vyacheslav Tyrtov
Quoted 10 lines · Vyacheslav Tyrtov

The series of patches represent support of Exynos 5410 SoC

The Exynos 5410 is the first Samsung SoC based on bigLITTLE architecture. Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same time

Patches add new platform description, support of clock controller, dual cluster support and device tree for Exynos 5410

Has been build on v3.12-rc5.
Has been tested on Exynos 5410 reference board (exynos_defconfig).

Has anyone tried this on the exynos5410 based odroid-xu yet?

I tried booting this on my recently arrived odroid-xu, but am not getting it to boot.

I'm not yet terribly familiar with this SoC, what are the settings needed for DEBUG_LL on this board?

Thanks,

Kevin

#19 lore raw

hi Kevin;

Quoted 10 lines
Quoted 8 lines · Vyacheslav Tyrtov

The series of patches represent support of Exynos 5410 SoC

The Exynos 5410 is the first Samsung SoC based on bigLITTLE architecture. Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same time

Patches add new platform description, support of clock controller, dual cluster support and device tree for Exynos 5410

Quoted 7 lines
Quoted 2 lines

Has been build on v3.12-rc5.
Has been tested on Exynos 5410 reference board (exynos_defconfig).

Has anyone tried this on the exynos5410 based odroid-xu yet?

I tried booting this on my recently arrived odroid-xu, but am not getting it to boot.

I am able to boot my odroid-xu+e to busybox with these patches applied against 3.12-rc5: exynos_defconfig and exynos5410-smdk5410.dtb were used.

However there seem to be some issues with virq allocations, check log in attachment.

--
Aliaksei

Quoted 4 lines

I'm not yet terribly familiar with this SoC, what are the settings needed for DEBUG_LL on this board?

Quoted 9 lines

Thanks,

Kevin

_______________________________________________
linux-arm-kernel mailing list linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Starting kernel ...

[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edcd ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq337 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edce ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq338 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edcf ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq339 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edd0 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq340 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edd1 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq341 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edd2 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq342 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edd3 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq343 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edd4 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq344 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edd5 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq345 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edd6 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq346 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edd7 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq347 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edd8 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq348 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edd9 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq349 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edda ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq350 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719eddb ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq351 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719eddc ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq352 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719eddd ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq353 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edde ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq354 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719eddf ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq355 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ede0 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq356 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ede1 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq357 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ede2 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq358 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ede3 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq359 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ede4 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq360 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ede5 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq361 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ede6 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq362 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ede7 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq363 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ede8 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq364 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ede9 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq365 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edea ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq366 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edeb ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq367 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edec ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq368 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719eded ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq369 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edee ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq370 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edef ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq371 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edf0 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq372 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edf1 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq373 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edf2 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq374 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edf3 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq375 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edf4 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq376 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edf5 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq377 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edf6 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq378 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edf7 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq379 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edf8 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq380 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edf9 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq381 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edfa ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq382 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edfb ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq383 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edfc ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq384 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edfd ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq385 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edfe ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq386 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edff ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq387 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee00 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq388 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee01 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq389 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee02 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq390 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee03 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq391 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee04 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq392 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee05 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq393 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee06 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq394 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee07 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq395 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee08 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq396 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee09 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq397 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee0a ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq398 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee0b ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq399 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee0c ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq400 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee0d ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq401 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee0e ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq402 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee0f ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq403 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee10 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq404 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee11 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq405 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee12 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq406 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee13 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq407 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee14 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq408 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee15 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq409 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee16 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq410 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee17 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq411 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee18 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq412 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee19 ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq413 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee1a ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq414 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee1b ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq415 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719ee1c ]---
[    0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.015000] Calibrating delay loop... 1785.85 BogoMIPS (lpj=4464640)
[    0.035000] pid_max: default: 32768 minimum: 301
[    0.035000] Mount-cache hash table entries: 512
[    0.035000] CPU: Testing write buffer coherency: ok
[    0.035000] CPU0: update cpu_power 1024
[    0.035000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.035000] Setting up static identity map for 0xc03687b0 - 0xc0368808
[    0.035000] ARM CCI driver probed
[    0.035000] EDCS power management initialized
[    0.035000] CPU1: Booted secondary processor
[    0.065000] CPU1: update cpu_power 1024
[    0.065000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.065000] Brought up 2 CPUs
[    0.065000] SMP: Total of 2 processors activated.
[    0.065000] CPU: All CPU(s) started in SVC mode.
[    0.065000] devtmpfs: initialized
[    0.075000] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.075000] pinctrl core: initialized pinctrl subsystem
[    0.075000] regulator-dummy: no parameters
[    0.075000] NET: Registered protocol family 16
[    0.075000] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.080000] S3C Power Management, Copyright 2004 Simtec Electronics
[    0.080000] EXYNOS: PMU not supported
[    0.080000] EXYNOS: Initializing architecture
[    0.090000] bio: create slab <bio-0> at 0
[    0.095000] SCSI subsystem initialized
[    0.095000] usbcore: registered new interface driver usbfs
[    0.095000] usbcore: registered new interface driver hub
[    0.095000] usbcore: registered new device driver usb
[    0.095000] Switched to clocksource mct-frc
[    0.110000] NET: Registered protocol family 2
[    0.110000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.110000] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[    0.110000] TCP: Hash tables configured (established 8192 bind 8192)
[    0.110000] TCP: reno registered
[    0.110000] UDP hash table entries: 512 (order: 2, 24576 bytes)
[    0.110000] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[    0.110000] NET: Registered protocol family 1
[    0.110000] Trying to unpack rootfs image as initramfs...
[    0.180000] Freeing initrd memory: 1496K (c2001000 - c2177000)
[    0.185000] bounce pool size: 64 pages
[    0.195000] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.195000] msgmni has been set to 1475
[    0.195000] io scheduler noop registered
[    0.195000] io scheduler deadline registered
[    0.195000] io scheduler cfq registered (default)
[    0.300000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.300000] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10
[    0.300000] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10
[    0.300000] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10
[   11.275000] console [ttySAC2] enabled
[   11.280000] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10
[   11.295000] brd: module loaded
[   11.300000] loop: module loaded
[   11.305000] usbcore: registered new interface driver asix
[   11.310000] usbcore: registered new interface driver ax88179_178a
[   11.315000] usbcore: registered new interface driver cdc_ether
[   11.320000] usbcore: registered new interface driver r815x
[   11.325000] usbcore: registered new interface driver smsc75xx
[   11.330000] usbcore: registered new interface driver smsc95xx
[   11.335000] usbcore: registered new interface driver net1080
[   11.345000] usbcore: registered new interface driver cdc_subset
[   11.350000] usbcore: registered new interface driver zaurus
[   11.355000] usbcore: registered new interface driver cdc_ncm
[   11.360000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   11.365000] ehci-s5p: EHCI s5p driver
[   11.370000] usbcore: registered new interface driver usb-storage
[   11.375000] mousedev: PS/2 mouse device common for all mice
[   11.385000] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: [email protected]
[   11.390000] sdhci: Secure Digital Host Controller Interface driver
[   11.395000] sdhci: Copyright(c) Pierre Ossman
[   11.400000] Synopsys Designware Multimedia Card Interface Driver
[   11.405000] dwmmc_exynos dwmmc0.0: invalid resource
[   11.410000] dwmmc_exynos: probe of dwmmc0.0 failed with error -22
[   11.415000] dwmmc_exynos dwmmc1.1: invalid resource
[   11.420000] dwmmc_exynos: probe of dwmmc1.1 failed with error -22
[   11.430000] dwmmc_exynos dwmmc2.2: invalid resource
[   11.435000] dwmmc_exynos: probe of dwmmc2.2 failed with error -22
[   11.440000] dwmmc_exynos 12200000.mmc: no vmmc regulator found: -19
[   11.445000] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[   11.450000] dwmmc_exynos 12200000.mmc: Version ID is 241a
[   11.455000] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107, 64 bit host data width, 128 deep fifo
[   11.480000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125)
[   11.500000] dwmmc_exynos 12200000.mmc: 1 slots initialized
[   11.500000] dwmmc_exynos 12220000.mmc: no vmmc regulator found: -19
[   11.510000] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[   11.515000] dwmmc_exynos 12220000.mmc: Version ID is 241a
[   11.520000] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109, 64 bit host data width, 128 deep fifo
[   11.545000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 300000Hz, actual 299401HZ div = 167)
[   11.550000] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125)
[   11.575000] dwmmc_exynos 12220000.mmc: 1 slots initialized
[   11.580000] usbcore: registered new interface driver usbhid
[   11.585000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 200000Hz, actual 200000HZ div = 250)
[   11.590000] usbhid: USB HID core driver
[   11.595000] TCP: cubic registered
[   11.600000] NET: Registered protocol family 17
[   11.605000] NET: Registered protocol family 15
[   11.610000] Registering SWP/SWPB emulation handler
[   11.615000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   11.620000] Freeing unused kernel memory: 216K (c049b000 - c04d1000)
[   11.625000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 196079Hz, actual 196078HZ div = 255)
[   11.635000] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
Bus error
+++ root: /dev/mmcblk0p5, init: , dev: mmcblk0p5 +++
+++ waiting for mmcblk0p5 to appear +++
[   11.680000] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 50000000Hz, actual 50000000HZ div = 1)
[   11.690000] mmc1: new high speed SDHC card at address b368
[   11.695000] mmcblk0: mmc1:b368 USD   14.9 GiB 
[   11.705000]  mmcblk0: p1 p2 p3 < p5 p6 p7 >
[   11.720000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125)
[   11.760000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 300000Hz, actual 299401HZ div = 167)
[   11.800000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 200000Hz, actual 200000HZ div = 250)
[   11.845000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 196079Hz, actual 196078HZ div = 255)
 179        5    2560000 mmcblk[   12.660000] EXT3-fs (mmcblk0p5): error: couldn't mount because of unsupported optio
nal features (240)
[   12.670000] EXT2-fs (mmcblk0p5): error: couldn't mount because of unsupported optional features (244)
0p5
+++ newroot is at /dev/mmcblk0p5 +++
[   12.690000] EXT4-fs (mmcblk0p5): recovery complete
[   12.695000] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)

+++ validate /newroot/ +++

+++ init not found, entering shell +++

mount: mounting debugfs on /sys/kernel/debug failed: No such file or directory
sh: can't access tty; job control turned off
/ #
/ # uname -a
Linux (none) 3.12.0-rc5-00004-g1cb405f #1 SMP PREEMPT Thu Oct 17 15:05:58 EEST 2013 armv7l GNU/Linux / #

#20 lore raw
In reply to Kevin Hilman

hi Kevin;

Quoted 10 lines
Quoted 8 lines · Vyacheslav Tyrtov

The series of patches represent support of Exynos 5410 SoC

The Exynos 5410 is the first Samsung SoC based on bigLITTLE architecture. Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same time

Patches add new platform description, support of clock controller, dual cluster support and device tree for Exynos 5410

Quoted 7 lines
Quoted 2 lines

Has been build on v3.12-rc5.
Has been tested on Exynos 5410 reference board (exynos_defconfig).

Has anyone tried this on the exynos5410 based odroid-xu yet?

I tried booting this on my recently arrived odroid-xu, but am not getting it to boot.

I am able to boot my odroid-xu+e to busybox with these patches applied against 3.12-rc5: exynos_defconfig and exynos5410-smdk5410.dtb were used.

However there seem to be some issues with virq allocations, like this:

<snippet>
Starting kernel ...

[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edcd ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq337 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edce ]---
[    0.000000] ------------[ cut here ]------------

</snippet>

You can check full boot log here http://sprunge.us/NKcU

--
Aliaksei

Quoted 13 lines

I'm not yet terribly familiar with this SoC, what are the settings needed for DEBUG_LL on this board?

Thanks,

Kevin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#21 lore raw
Quoted 59 lines · Aliaksei Katovich

hi Kevin;

Quoted 10 lines
Quoted 8 lines · Vyacheslav Tyrtov

The series of patches represent support of Exynos 5410 SoC

The Exynos 5410 is the first Samsung SoC based on bigLITTLE architecture. Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same time

Patches add new platform description, support of clock controller, dual cluster support and device tree for Exynos 5410

Quoted 6 lines
Quoted 2 lines

Has been build on v3.12-rc5.
Has been tested on Exynos 5410 reference board (exynos_defconfig).

Has anyone tried this on the exynos5410 based odroid-xu yet?

I tried booting this on my recently arrived odroid-xu, but am not getting it to boot.

I am able to boot my odroid-xu+e to busybox with these patches applied against 3.12-rc5: exynos_defconfig and exynos5410-smdk5410.dtb were used.

However there seem to be some issues with virq allocations, like this:

<snippet>
Starting kernel ...

[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edcd ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq337 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edce ]---
[    0.000000] ------------[ cut here ]------------
Quoted 19 lines

</snippet>

You can check full boot log here http://sprunge.us/NKcU

--
Aliaksei

Quoted 12 lines

I'm not yet terribly familiar with this SoC, what are the settings needed for DEBUG_LL on this board?

Thanks,

Kevin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

This will be fixed in 3.13.

Now you can just change "irq_base = 160" to "irq_base = 256" in "static int __init combiner_of_init(struct device_node *np, struct device_node *parent)" function
in "drivers/irqchip/exynos-combiner.c"

Best regards,
Tarek Dakhran

#22 lore raw

hi Tarek;

<skip>

Quoted 38 lines
Quoted 37 lines

However there seem to be some issues with virq allocations, like this:

<snippet>
Starting kernel ...

[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edcd ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq337 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edce ]---
[    0.000000] ------------[ cut here ]------------
Quoted 1 line

</snippet>

Quoted 6 lines

This will be fixed in 3.13.

Now you can just change "irq_base = 160" to "irq_base = 256" in "static int __init combiner_of_init(struct device_node *np, struct device_node *parent)" function
in "drivers/irqchip/exynos-combiner.c"

Thanks, this works for me!

--
Aliaksei

Quoted 4 lines

Best regards,
Tarek Dakhran

#23 lore raw
In reply to Aliaksei Katovich
Quoted 59 lines · Aliaksei Katovich

hi Kevin;

Quoted 10 lines
Quoted 8 lines · Vyacheslav Tyrtov

The series of patches represent support of Exynos 5410 SoC

The Exynos 5410 is the first Samsung SoC based on bigLITTLE architecture. Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same time

Patches add new platform description, support of clock controller, dual cluster support and device tree for Exynos 5410

Quoted 6 lines
Quoted 2 lines

Has been build on v3.12-rc5.
Has been tested on Exynos 5410 reference board (exynos_defconfig).

Has anyone tried this on the exynos5410 based odroid-xu yet?

I tried booting this on my recently arrived odroid-xu, but am not getting it to boot.

I am able to boot my odroid-xu+e to busybox with these patches applied against 3.12-rc5: exynos_defconfig and exynos5410-smdk5410.dtb were used.

However there seem to be some issues with virq allocations, like this:

<snippet>
Starting kernel ...

[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edcd ]---
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:278 irq_domain_associate+0x128/0x1a8()
[    0.000000] error: virq337 is not allocated
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.12.0-rc5-00004-g1cb405f #1
[    0.000000] [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[    0.000000] [<c00117d0>] (show_stack+0x10/0x14) from [<c0363488>] (dump_stack+0x6c/0xac)
[    0.000000] [<c0363488>] (dump_stack+0x6c/0xac) from [<c001e330>] (warn_slowpath_common+0x64/0x88)
[    0.000000] [<c001e330>] (warn_slowpath_common+0x64/0x88) from [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c001e3e8>] (warn_slowpath_fmt+0x30/0x40) from [<c005a1b4>] (irq_domain_associate+0x128/0x1a8)
[    0.000000] [<c005a1b4>] (irq_domain_associate+0x128/0x1a8) from [<c005a508>] (irq_domain_associate_many+0x30/0x3c
)
[    0.000000] [<c005a508>] (irq_domain_associate_many+0x30/0x3c) from [<c005a768>] (irq_domain_add_simple+0x78/0x90)
[    0.000000] [<c005a768>] (irq_domain_add_simple+0x78/0x90) from [<c04b044c>] (combiner_of_init+0xb4/0x198)
[    0.000000] [<c04b044c>] (combiner_of_init+0xb4/0x198) from [<c04b6938>] (of_irq_init+0x278/0x2a0)
[    0.000000] [<c04b6938>] (of_irq_init+0x278/0x2a0) from [<c049b8fc>] (start_kernel+0x18c/0x384)
[    0.000000] [<c049b8fc>] (start_kernel+0x18c/0x384) from [<40008074>] (0x40008074)
[    0.000000] ---[ end trace 1b75b31a2719edce ]---
[    0.000000] ------------[ cut here ]------------
Quoted 19 lines

</snippet>

You can check full boot log here http://sprunge.us/NKcU

--
Aliaksei

Quoted 12 lines

I'm not yet terribly familiar with this SoC, what are the settings needed for DEBUG_LL on this board?

Thanks,

Kevin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Also change NR_CPUS to 8 in kernel config, so you will get 8 cores booted instead of 2.

Best regards,
Tarek Dakhran

#24 lore raw
In reply to Aliaksei Katovich
Quoted 17 lines · Aliaksei Katovich

hi Kevin;

Quoted 15 lines
Quoted 10 lines · Vyacheslav Tyrtov

The series of patches represent support of Exynos 5410 SoC

The Exynos 5410 is the first Samsung SoC based on bigLITTLE architecture. Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same time

Patches add new platform description, support of clock controller, dual cluster support and device tree for Exynos 5410

Has been build on v3.12-rc5.
Has been tested on Exynos 5410 reference board (exynos_defconfig).

Has anyone tried this on the exynos5410 based odroid-xu yet?

Quoted 8 lines
Quoted 2 lines

I tried booting this on my recently arrived odroid-xu, but am not getting it to boot.

I am able to boot my odroid-xu+e to busybox with these patches applied against 3.12-rc5: exynos_defconfig and exynos5410-smdk5410.dtb were used.

However there seem to be some issues with virq allocations, like this:

Ah, I've seen the same thing, but for me it doesn't boot reliably. Sometimes there's an immediate fault like this[1], and once in a rare while, it starts to boot and I see the same virq errors.

Curious what you guys are using for boot loaders. I found some pre-build u-boot binaries along with the necessary BL1/2 binary blobs in the hardkernel kernel repo: https://github.com/hardkernel/linux.git
branch: origin/odroidxu-3.4.y
path: tools/hardkernel/u-boot-pre-built

Unfortunatly, that u-boot doesn't have usb networking support built in so I couln't use u-boot to tftp the kernel, so I was able to use fasboot to load the kernel/ramdisk, but it's very flaky.

Do you have an pointers of where to get a known working bootloader. Ideally, a u-boot with networking/tftp support would be ideal.

Thanks,

Kevin

[1]
USB cable Connected![0x4]
Starting download of 10008576 bytes
.........
downloading of 10008576 bytes finished Kernel size: 00296bc5
Ramdisk size: 006f3c00
Booting kernel..
## Booting kernel from Legacy Image at 40008000 ...

   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2714501 Bytes = 2.6 MiB

Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
XIP Kernel Image ... OK
OK

Starting kernel ...

undefined instruction

pc : [<4000800c>]          lr : [<bfc65df4>]

sp : bfb5bbc8 ip : 00000000 fp : 00001251
r10: 00000000 r9 : 00000000 r8 : bfb5bf30
r7 : 00000000 r6 : 00000000 r5 : 40008000 r4 : bfcabac0
r3 : bfb5bfa8 r2 : 40000100 r1 : 00001251 r0 : 00000000
Flags: nZCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...

emmc resetting ...
resetting ...

A message that is not in the archive (sent off-list or not yet received): CAGc3s_cbCgdPdbCPF2XN+p-O5RfM-4pNZT49=_4MOVy=Lz8d=Q@mail.gmail.com

#26 lore raw

Hi Mauro,

Quoted 3 lines · Mauro Ribeiro

Kevin,

https://github.com/hardkernel/u-boot/tree/odroid-v2012.07

Yes, this is the one I'm using, but USB networking doesn't seem to work with that. Do you have USB networking working with that u-boot? If so, what changes to the config did you make?

Kevin

Quoted 94 lines · Kevin Hilman
Quoted 92 lines
Quoted 7 lines · Aliaksei Katovich

hi Kevin;

Quoted 5 lines
Quoted 3 lines · Vyacheslav Tyrtov

The series of patches represent support of Exynos 5410 SoC

The Exynos 5410 is the first Samsung SoC based on bigLITTLE

architecture.

Quoted 1 line
Quoted 1 line
Quoted 1 line

Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same

time

Quoted 7 lines
Quoted 7 lines
Quoted 6 lines

Patches add new platform description, support of clock controller, dual cluster support and device tree for Exynos 5410

Has been build on v3.12-rc5.
Has been tested on Exynos 5410 reference board (exynos_defconfig).

Quoted 6 lines
Quoted 4 lines

Has anyone tried this on the exynos5410 based odroid-xu yet?

I tried booting this on my recently arrived odroid-xu, but am not getting it to boot.

I am able to boot my odroid-xu+e to busybox with these patches

applied

Quoted 4 lines

against 3.12-rc5: exynos_defconfig and exynos5410-smdk5410.dtb were used.

However there seem to be some issues with virq allocations, like

this:

Ah, I've seen the same thing, but for me it doesn't boot reliably. Sometimes there's an immediate fault like this[1], and once in a rare while, it starts to boot and I see the same virq errors.

Curious what you guys are using for boot loaders. I found some pre-build u-boot binaries along with the necessary BL1/2 binary blobs in the hardkernel kernel repo: https://github.com/hardkernel/linux.git
branch: origin/odroidxu-3.4.y
path: tools/hardkernel/u-boot-pre-built

Unfortunatly, that u-boot doesn't have usb networking support built in so I couln't use u-boot to tftp the kernel, so I was able to use fasboot to load the kernel/ramdisk, but it's very flaky.

Do you have an pointers of where to get a known working bootloader. Ideally, a u-boot with networking/tftp support would be ideal.

Thanks,

Kevin

[1]
USB cable Connected![0x4]
Starting download of 10008576 bytes
.........
downloading of 10008576 bytes finished Kernel size: 00296bc5
Ramdisk size: 006f3c00
Booting kernel..
## Booting kernel from Legacy Image at 40008000 ...

   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2714501 Bytes = 2.6 MiB

Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
XIP Kernel Image ... OK
OK

Starting kernel ...

undefined instruction

pc : [<4000800c>]          lr : [<bfc65df4>]

sp : bfb5bbc8 ip : 00000000 fp : 00001251
r10: 00000000 r9 : 00000000 r8 : bfb5bf30
r7 : 00000000 r6 : 00000000 r5 : 40008000 r4 : bfcabac0
r3 : bfb5bfa8 r2 : 40000100 r1 : 00001251 r0 : 00000000
Flags: nZCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...

emmc resetting ...
resetting ...

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

#27 lore raw
In reply to Vyacheslav Tyrtov

Today, I checked 3.12 but I could not find this patch. Is it dead or under development? If it is under development, any external link?

Thanks
with sincerely respects...

Quoted 96 lines · Vyacheslav Tyrtov

The series of patches represent support of Exynos 5410 SoC

The Exynos 5410 is the first Samsung SoC based on bigLITTLE architecture. Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same time

Patches add new platform description, support of clock controller, dual cluster support and device tree for Exynos 5410

Has been build on v3.12-rc5.
Has been tested on Exynos 5410 reference board (exynos_defconfig).

Thanks,
Vyacheslav.

Changelog:

v2:
In drivers/clk/samsung/clk-exynos5410.c
1. Clock driver converted to use preprocessor macros instead of enums. Clock IDs now defined in include/dt-bindings/clock/exynos5410.h.
2. Unused spinlock removed.
3. Function exynos5410_clk_init defined as static.
Struct exynos5410_fixed_rate_ext_clks defined as static. Struct exynos5410_mux_clks defined as static.
Struct exynos5410_div_clks defined as static.
Struct exynos5410_gate_clks defined as static.
4. Removed aliases.
5. Pll's magic register offsets defined as preprocessor macros.
6. Redundant check of device_node pointer removed.

In arch/arm/boot/dts/exynos5410.dtsi
1. dwmmcX nodes renamed to mmc.
dwmmc_X renamed to mmc_X.
dwmmc status="disabled" field added.
fifo-depth field moved from arch/arm/boot/dts/exynos5410-smdk5410.dts
2. Blank lines added where necessary.
3. cpu@ suffixes corrected.
4. edcs node removed.
5. Hexadecimal characters case corrected.
6. Clock IDs replaced with preprocessor macros.

        In arch/arm/boot/dts/exynos5410-smdk5410.dts

1. status = "okay" field added to mmc nodes.

In arch/arm/mach-exynos/edcs.c
1. "kfs_" prefix replaced with "edcs_"
2. EDCS_CPUS_PER_CLUSTER and EDCS_CLUSTERS defined instead of MCPM's values.
3. Cache handling sequence borrowed from arch/arm/mach-vexpress/tc2_pm.c
4. mcpm_sync_init() call added.
5. power management functions reworked.

Other
1. Documentation/devicetree/bindings/clock/exynos5410-clock.txt corrected.
2. Removed smdk5410_defconfig. Instead SOC_EXYNOS5410 now selects MCPM and ARM_CCI in arch/arm/mach-exynos/Kconfig.
3. edcs_status driver removed.

Tarek Dakhran (4):
ARM: EXYNOS: Add support for EXYNOS5410 SoC
clk: exynos5410: register clocks using common clock framework
ARM: EXYNOS: add Exynos Dual Cluster Support
ARM: dts: Add initial device tree support for EXYNOS5410

 .../devicetree/bindings/clock/exynos5410-clock.txt |  37 +++
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/exynos5410-smdk5410.dts          |  65 +++++
 arch/arm/boot/dts/exynos5410.dtsi                  | 209 ++++++++++++++++
 arch/arm/mach-exynos/Kconfig                       |  12 +
 arch/arm/mach-exynos/Makefile                      |   2 +
 arch/arm/mach-exynos/common.c                      |  18 ++
 arch/arm/mach-exynos/edcs.c                        | 270 +++++++++++++++++++++
 arch/arm/mach-exynos/include/mach/map.h            |   1 +
 arch/arm/mach-exynos/mach-exynos5-dt.c             |   1 +
 arch/arm/plat-samsung/include/plat/cpu.h           |   8 +
 drivers/clk/samsung/Makefile                       |   1 +
 drivers/clk/samsung/clk-exynos5410.c               | 251 +++++++++++++++++++
 include/dt-bindings/clock/exynos5410.h             | 175 +++++++++++++
 14 files changed, 1051 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/exynos5410-clock.txt
 create mode 100644 arch/arm/boot/dts/exynos5410-smdk5410.dts
 create mode 100644 arch/arm/boot/dts/exynos5410.dtsi
 create mode 100644 arch/arm/mach-exynos/edcs.c
 create mode 100644 drivers/clk/samsung/clk-exynos5410.c
 create mode 100644 include/dt-bindings/clock/exynos5410.h

--
1.8.1.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/