Skip to contentSkip to conversation

sfc: TXQ refactor

PATCH Applied Edward Cree 2 participants 8 messages Sep 3, 2020 – Sep 5, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v2 cover sfc: TXQ refactor

Refactor and unify partner-TXQ handling in the EF100 and legacy drivers.

The main thrust of this series is to remove from the legacy (Siena/EF10)
driver the assumption that a netdev TX queue has precisely two hardware TXQs (checksummed and unchecksummed) associated with it, so that in future we can have more (e.g. for handling inner-header checksums) or fewer (e.g. to free up hardware queues for XDP usage).

Changes from v1:
* better explain patch #1 in the commit message, and rename xmit_more_available to xmit_pending
* add new patch #2 applying the same approach to ef100, for consistency

Edward Cree (6):
sfc: add and use efx_tx_send_pending in tx.c
sfc: make ef100 xmit_more handling look more like ef10's
sfc: use tx_queue->old_read_count in EF100 TX path
sfc: use efx_channel_tx_[old_]fill_level() in Siena/EF10 TX datapath
sfc: rewrite efx_tx_may_pio
sfc: remove efx_tx_queue_partner

 drivers/net/ethernet/sfc/ef10.c       |  2 +-
 drivers/net/ethernet/sfc/ef100_tx.c   | 34 +++++----
 drivers/net/ethernet/sfc/ef100_tx.h   |  1 -
 drivers/net/ethernet/sfc/farch.c      |  2 +-
 drivers/net/ethernet/sfc/net_driver.h | 22 ++++--
 drivers/net/ethernet/sfc/nic_common.h | 40 +----------
 drivers/net/ethernet/sfc/tx.c         | 99 +++++++++++++++++----------
 drivers/net/ethernet/sfc/tx_common.c  |  9 +--
 8 files changed, 104 insertions(+), 105 deletions(-)
#1 lore raw

PATCH v2 1/6 sfc: add and use efx_tx_send_pending in tx.c

Instead of using efx_tx_queue_partner(), which relies on the assumption
that tx_queues_per_channel is 2, efx_tx_send_pending() iterates over txqs with efx_for_each_channel_tx_queue().
We unconditionally set tx_queue->xmit_pending (renamed from
xmit_more_available), then condition on xmit_more for the call to efx_tx_send_pending(), which will clear xmit_pending. Thus, after an xmit_more TX, the doorbell is un-rung and xmit_pending is true.

---
 drivers/net/ethernet/sfc/ef10.c       |  2 +-
 drivers/net/ethernet/sfc/ef100_tx.c   | 14 +++----
 drivers/net/ethernet/sfc/farch.c      |  2 +-
 drivers/net/ethernet/sfc/net_driver.h |  4 +-
 drivers/net/ethernet/sfc/tx.c         | 59 ++++++++++++++-------------
 drivers/net/ethernet/sfc/tx_common.c  |  4 +-
 6 files changed, 44 insertions(+), 41 deletions(-)
drivers/net/ethernet/sfc/ef10.c +1 -1
index 0b4bcac53f18..316e14533e9d 100644
@@ -2367,7 +2367,7 @@ static void efx_ef10_tx_write(struct efx_tx_queue *tx_queue)
 	unsigned int write_ptr;
 	efx_qword_t *txd;
 
-	tx_queue->xmit_more_available = false;
+	tx_queue->xmit_pending = false;
 	if (unlikely(tx_queue->write_count == tx_queue->insert_count))
 		return;
 
drivers/net/ethernet/sfc/ef100_tx.c +7 -7
index a09546e43408..8d478c5e720e 100644
@@ -131,7 +131,7 @@ void ef100_notify_tx_desc(struct efx_tx_queue *tx_queue)
 	efx_writed_page(tx_queue->efx, &reg,
 			ER_GZ_TX_RING_DOORBELL, tx_queue->queue);
 	tx_queue->notify_count = tx_queue->write_count;
-	tx_queue->xmit_more_available = false;
+	tx_queue->xmit_pending = false;
 }
 
 static void ef100_tx_push_buffers(struct efx_tx_queue *tx_queue)
@@ -373,14 +373,14 @@ int ef100_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb)
 	}
 
 	if (__netdev_tx_sent_queue(tx_queue->core_txq, skb->len, xmit_more))
-		tx_queue->xmit_more_available = false; /* push doorbell */
+		tx_queue->xmit_pending = false; /* push doorbell */
 	else if (tx_queue->write_count - tx_queue->notify_count > 255)
 		/* Ensure we never push more than 256 packets at once */
-		tx_queue->xmit_more_available = false; /* push */
+		tx_queue->xmit_pending = false; /* push */
 	else
-		tx_queue->xmit_more_available = true; /* don't push yet */
+		tx_queue->xmit_pending = true; /* don't push yet */
 
-	if (!tx_queue->xmit_more_available)
+	if (!tx_queue->xmit_pending)
 		ef100_tx_push_buffers(tx_queue);
 
 	if (segments) {
@@ -400,9 +400,9 @@ int ef100_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb)
 	/* If we're not expecting another transmit and we had something to push
 	 * on this queue then we need to push here to get the previous packets
 	 * out.  We only enter this branch from before the 'Update BQL' section
-	 * above, so xmit_more_available still refers to the old state.
+	 * above, so xmit_pending still refers to the old state.
 	 */
-	if (tx_queue->xmit_more_available && !xmit_more)
+	if (tx_queue->xmit_pending && !xmit_more)
 		ef100_tx_push_buffers(tx_queue);
 	return rc;
 }
drivers/net/ethernet/sfc/farch.c +1 -1
index 0d9795fb9356..b6f67a0cc882 100644
@@ -320,7 +320,7 @@ void efx_farch_tx_write(struct efx_tx_queue *tx_queue)
 	unsigned write_ptr;
 	unsigned old_write_count = tx_queue->write_count;
 
-	tx_queue->xmit_more_available = false;
+	tx_queue->xmit_pending = false;
 	if (unlikely(tx_queue->write_count == tx_queue->insert_count))
 		return;
 
drivers/net/ethernet/sfc/net_driver.h +2 -2
index 338ebb0402be..adc138f9d15f 100644
@@ -244,7 +244,7 @@ struct efx_tx_buffer {
  * @tso_fallbacks: Number of times TSO fallback used
  * @pushes: Number of times the TX push feature has been used
  * @pio_packets: Number of times the TX PIO feature has been used
- * @xmit_more_available: Are any packets waiting to be pushed to the NIC
+ * @xmit_pending: Are any packets waiting to be pushed to the NIC
  * @cb_packets: Number of times the TX copybreak feature has been used
  * @notify_count: Count of notified descriptors to the NIC
  * @empty_read_count: If the completion path has seen the queue as empty
@@ -292,7 +292,7 @@ struct efx_tx_queue {
 	unsigned int tso_fallbacks;
 	unsigned int pushes;
 	unsigned int pio_packets;
-	bool xmit_more_available;
+	bool xmit_pending;
 	unsigned int cb_packets;
 	unsigned int notify_count;
 	/* Statistics to supplement MAC stats */
drivers/net/ethernet/sfc/tx.c +31 -28

90 lines not on this page · raw message

drivers/net/ethernet/sfc/tx_common.c +2 -2
index 793e234819a8..187d5c379a37 100644
@@ -78,7 +78,7 @@ void efx_init_tx_queue(struct efx_tx_queue *tx_queue)
 	tx_queue->read_count = 0;
 	tx_queue->old_read_count = 0;
 	tx_queue->empty_read_count = 0 | EFX_EMPTY_COUNT_VALID;
-	tx_queue->xmit_more_available = false;
+	tx_queue->xmit_pending = false;
 	tx_queue->timestamping = (efx_ptp_use_mac_tx_timestamps(efx) &&
 				  tx_queue->channel == efx_ptp_channel(efx));
 	tx_queue->completed_timestamp_major = 0;
@@ -116,7 +116,7 @@ void efx_fini_tx_queue(struct efx_tx_queue *tx_queue)
 
 		++tx_queue->read_count;
 	}
-	tx_queue->xmit_more_available = false;
+	tx_queue->xmit_pending = false;
 	netdev_tx_reset_queue(tx_queue->core_txq);
 }
 
#2 lore raw

PATCH v2 2/6 sfc: make ef100 xmit_more handling look more like ef10's

In reply to Edward Cree

This should cause no functional change; merely make there only be one
design of xmit_more handling to understand. As with the EF10/Siena version, we set tx_queue->xmit_pending when we queue up a TX, and clear it when we ring the doorbell (in ef100_notify_tx_desc).
While we're at it, make ef100_notify_tx_desc static since nothing
outside of ef100_tx.c uses it.

---
 drivers/net/ethernet/sfc/ef100_tx.c | 22 +++++++++++-----------
 drivers/net/ethernet/sfc/ef100_tx.h |  1 -
 2 files changed, 11 insertions(+), 12 deletions(-)
drivers/net/ethernet/sfc/ef100_tx.c +11 -11
index 8d478c5e720e..ce1b462efd17 100644
@@ -117,11 +117,13 @@ static efx_oword_t *ef100_tx_desc(struct efx_tx_queue *tx_queue, unsigned int in
 		return NULL;
 }
 
-void ef100_notify_tx_desc(struct efx_tx_queue *tx_queue)
+static void ef100_notify_tx_desc(struct efx_tx_queue *tx_queue)
 {
 	unsigned int write_ptr;
 	efx_dword_t reg;
 
+	tx_queue->xmit_pending = false;
+
 	if (unlikely(tx_queue->notify_count == tx_queue->write_count))
 		return;
 
@@ -131,7 +133,6 @@ void ef100_notify_tx_desc(struct efx_tx_queue *tx_queue)
 	efx_writed_page(tx_queue->efx, &reg,
 			ER_GZ_TX_RING_DOORBELL, tx_queue->queue);
 	tx_queue->notify_count = tx_queue->write_count;
-	tx_queue->xmit_pending = false;
 }
 
 static void ef100_tx_push_buffers(struct efx_tx_queue *tx_queue)
@@ -372,15 +373,14 @@ int ef100_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb)
 			netif_tx_start_queue(tx_queue->core_txq);
 	}
 
-	if (__netdev_tx_sent_queue(tx_queue->core_txq, skb->len, xmit_more))
-		tx_queue->xmit_pending = false; /* push doorbell */
-	else if (tx_queue->write_count - tx_queue->notify_count > 255)
-		/* Ensure we never push more than 256 packets at once */
-		tx_queue->xmit_pending = false; /* push */
-	else
-		tx_queue->xmit_pending = true; /* don't push yet */
+	tx_queue->xmit_pending = true;
 
-	if (!tx_queue->xmit_pending)
+	/* If xmit_more then we don't need to push the doorbell, unless there
+	 * are 256 descriptors already queued in which case we have to push to
+	 * ensure we never push more than 256 at once.
+	 */
+	if (__netdev_tx_sent_queue(tx_queue->core_txq, skb->len, xmit_more) ||
+	    tx_queue->write_count - tx_queue->notify_count > 255)
 		ef100_tx_push_buffers(tx_queue);
 
 	if (segments) {
@@ -399,7 +399,7 @@ int ef100_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb)
 
 	/* If we're not expecting another transmit and we had something to push
 	 * on this queue then we need to push here to get the previous packets
-	 * out.  We only enter this branch from before the 'Update BQL' section
+	 * out.  We only enter this branch from before the xmit_more handling
 	 * above, so xmit_pending still refers to the old state.
 	 */
 	if (tx_queue->xmit_pending && !xmit_more)
drivers/net/ethernet/sfc/ef100_tx.h +0 -1
index fa23e430bdd7..ddc4b98fa6db 100644
@@ -17,7 +17,6 @@
 int ef100_tx_probe(struct efx_tx_queue *tx_queue);
 void ef100_tx_init(struct efx_tx_queue *tx_queue);
 void ef100_tx_write(struct efx_tx_queue *tx_queue);
-void ef100_notify_tx_desc(struct efx_tx_queue *tx_queue);
 unsigned int ef100_tx_max_skb_descs(struct efx_nic *efx);
 
 void ef100_ev_tx(struct efx_channel *channel, const efx_qword_t *p_event);
#3 lore raw

PATCH v2 3/6 sfc: use tx_queue->old_read_count in EF100 TX path

In reply to Edward Cree

As in the Siena/EF10 case, it minimises cacheline ping-pong between
the TX and completion paths.

---
 drivers/net/ethernet/sfc/ef100_tx.c   |  8 ++++++--
 drivers/net/ethernet/sfc/net_driver.h | 14 ++++++++++++++
 2 files changed, 20 insertions(+), 2 deletions(-)
drivers/net/ethernet/sfc/ef100_tx.c +6 -2
index ce1b462efd17..078c7ec2a70e 100644
@@ -360,15 +360,19 @@ int ef100_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb)
 		goto err;
 	ef100_tx_make_descriptors(tx_queue, skb, segments);
 
-	fill_level = efx_channel_tx_fill_level(tx_queue->channel);
+	fill_level = efx_channel_tx_old_fill_level(tx_queue->channel);
 	if (fill_level > efx->txq_stop_thresh) {
+		struct efx_tx_queue *txq2;
+
 		netif_tx_stop_queue(tx_queue->core_txq);
 		/* Re-read after a memory barrier in case we've raced with
 		 * the completion path. Otherwise there's a danger we'll never
 		 * restart the queue if all completions have just happened.
 		 */
 		smp_mb();
-		fill_level = efx_channel_tx_fill_level(tx_queue->channel);
+		efx_for_each_channel_tx_queue(txq2, tx_queue->channel)
+			txq2->old_read_count = READ_ONCE(txq2->read_count);
+		fill_level = efx_channel_tx_old_fill_level(tx_queue->channel);
 		if (fill_level < efx->txq_stop_thresh)
 			netif_tx_start_queue(tx_queue->core_txq);
 	}
drivers/net/ethernet/sfc/net_driver.h +14 -0
index adc138f9d15f..366e649fa869 100644
@@ -1692,6 +1692,20 @@ efx_channel_tx_fill_level(struct efx_channel *channel)
 	return fill_level;
 }
 
+/* Conservative approximation of efx_channel_tx_fill_level using cached value */
+static inline unsigned int
+efx_channel_tx_old_fill_level(struct efx_channel *channel)
+{
+	struct efx_tx_queue *tx_queue;
+	unsigned int fill_level = 0;
+
+	efx_for_each_channel_tx_queue(tx_queue, channel)
+		fill_level = max(fill_level,
+				 tx_queue->insert_count - tx_queue->old_read_count);
+
+	return fill_level;
+}
+
 /* Get all supported features.
  * If a feature is not fixed, it is present in hw_features.
  * If a feature is fixed, it does not present in hw_features, but
#4 lore raw

PATCH v2 4/6 sfc: use efx_channel_tx_[old_]fill_level() in Siena/EF10 TX datapath

In reply to Edward Cree

Instead of open-coding the calculation with efx_tx_queue_partner(), use
the functions that iterate over numbers of queues other than 2 with efx_for_each_channel_tx_queue().

---
 drivers/net/ethernet/sfc/net_driver.h |  4 ----
 drivers/net/ethernet/sfc/tx.c         | 14 ++++++--------
 drivers/net/ethernet/sfc/tx_common.c  |  5 +----
 3 files changed, 7 insertions(+), 16 deletions(-)
drivers/net/ethernet/sfc/net_driver.h +0 -4
index 366e649fa869..fc7ba51e555a 100644
@@ -1681,10 +1681,6 @@ efx_channel_tx_fill_level(struct efx_channel *channel)
 	struct efx_tx_queue *tx_queue;
 	unsigned int fill_level = 0;
 
-	/* This function is currently only used by EF100, which maybe
-	 * could do something simpler and just compute the fill level
-	 * of the single TXQ that's really in use.
-	 */
 	efx_for_each_channel_tx_queue(tx_queue, channel)
 		fill_level = max(fill_level,
 				 tx_queue->insert_count - tx_queue->read_count);
drivers/net/ethernet/sfc/tx.c +6 -8
index c502d226371a..b868920b680c 100644
@@ -59,13 +59,12 @@ u8 *efx_tx_get_copy_buffer_limited(struct efx_tx_queue *tx_queue,
 
 static void efx_tx_maybe_stop_queue(struct efx_tx_queue *txq1)
 {
-	/* We need to consider both queues that the net core sees as one */
-	struct efx_tx_queue *txq2 = efx_tx_queue_partner(txq1);
+	/* We need to consider all queues that the net core sees as one */
 	struct efx_nic *efx = txq1->efx;
+	struct efx_tx_queue *txq2;
 	unsigned int fill_level;
 
-	fill_level = max(txq1->insert_count - txq1->old_read_count,
-			 txq2->insert_count - txq2->old_read_count);
+	fill_level = efx_channel_tx_old_fill_level(txq1->channel);
 	if (likely(fill_level < efx->txq_stop_thresh))
 		return;
 
@@ -85,11 +84,10 @@ static void efx_tx_maybe_stop_queue(struct efx_tx_queue *txq1)
 	 */
 	netif_tx_stop_queue(txq1->core_txq);
 	smp_mb();
-	txq1->old_read_count = READ_ONCE(txq1->read_count);
-	txq2->old_read_count = READ_ONCE(txq2->read_count);
+	efx_for_each_channel_tx_queue(txq2, txq1->channel)
+		txq2->old_read_count = READ_ONCE(txq2->read_count);
 
-	fill_level = max(txq1->insert_count - txq1->old_read_count,
-			 txq2->insert_count - txq2->old_read_count);
+	fill_level = efx_channel_tx_old_fill_level(txq1->channel);
 	EFX_WARN_ON_ONCE_PARANOID(fill_level >= efx->txq_entries);
 	if (likely(fill_level < efx->txq_stop_thresh)) {
 		smp_mb();
drivers/net/ethernet/sfc/tx_common.c +1 -4
index 187d5c379a37..f2dac83beb7d 100644
@@ -242,7 +242,6 @@ void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index)
 {
 	unsigned int fill_level, pkts_compl = 0, bytes_compl = 0;
 	struct efx_nic *efx = tx_queue->efx;
-	struct efx_tx_queue *txq2;
 
 	EFX_WARN_ON_ONCE_PARANOID(index > tx_queue->ptr_mask);
 
@@ -261,9 +260,7 @@ void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index)
 	if (unlikely(netif_tx_queue_stopped(tx_queue->core_txq)) &&
 	    likely(efx->port_enabled) &&
 	    likely(netif_device_present(efx->net_dev))) {
-		txq2 = efx_tx_queue_partner(tx_queue);
-		fill_level = max(tx_queue->insert_count - tx_queue->read_count,
-				 txq2->insert_count - txq2->read_count);
+		fill_level = efx_channel_tx_fill_level(tx_queue->channel);
 		if (fill_level <= efx->txq_wake_thresh)
 			netif_tx_wake_queue(tx_queue->core_txq);
 	}
#5 lore raw

PATCH v2 5/6 sfc: rewrite efx_tx_may_pio

In reply to Edward Cree

Use efx_for_each_channel_tx_queue() rather than efx_tx_queue_partner(). Make some related simplifications of efx_nic_tx_is_empty() to remove
entry points that aren't used.

---
 drivers/net/ethernet/sfc/nic_common.h | 30 ++-------------------------
 drivers/net/ethernet/sfc/tx.c         | 26 ++++++++++++++++++++++-
 2 files changed, 27 insertions(+), 29 deletions(-)
drivers/net/ethernet/sfc/nic_common.h +2 -28
index 974107354087..3f88c6444fa1 100644
@@ -65,8 +65,7 @@ efx_tx_desc(struct efx_tx_queue *tx_queue, unsigned int index)
 /* Report whether this TX queue would be empty for the given write_count.
  * May return false negative.
  */
-static inline bool __efx_nic_tx_is_empty(struct efx_tx_queue *tx_queue,
-					 unsigned int write_count)
+static inline bool efx_nic_tx_is_empty(struct efx_tx_queue *tx_queue, unsigned int write_count)
 {
 	unsigned int empty_read_count = READ_ONCE(tx_queue->empty_read_count);
 
@@ -76,17 +75,6 @@ static inline bool __efx_nic_tx_is_empty(struct efx_tx_queue *tx_queue,
 	return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0;
 }
 
-/* Report whether the NIC considers this TX queue empty, using
- * packet_write_count (the write count recorded for the last completable
- * doorbell push).  May return false negative.  EF10 only, which is OK
- * because only EF10 supports PIO.
- */
-static inline bool efx_nic_tx_is_empty(struct efx_tx_queue *tx_queue)
-{
-	EFX_WARN_ON_ONCE_PARANOID(!tx_queue->efx->type->option_descriptors);
-	return __efx_nic_tx_is_empty(tx_queue, tx_queue->packet_write_count);
-}
-
 /* Get partner of a TX queue, seen as part of the same net core queue */
 /* XXX is this a thing on EF100? */
 static inline struct efx_tx_queue *efx_tx_queue_partner(struct efx_tx_queue *tx_queue)
@@ -97,20 +85,6 @@ static inline struct efx_tx_queue *efx_tx_queue_partner(struct efx_tx_queue *tx_
 		return tx_queue + EFX_TXQ_TYPE_OFFLOAD;
 }
 
-/* Decide whether we can use TX PIO, ie. write packet data directly into
- * a buffer on the device.  This can reduce latency at the expense of
- * throughput, so we only do this if both hardware and software TX rings
- * are empty.  This also ensures that only one packet at a time can be
- * using the PIO buffer.
- */
-static inline bool efx_nic_may_tx_pio(struct efx_tx_queue *tx_queue)
-{
-	struct efx_tx_queue *partner = efx_tx_queue_partner(tx_queue);
-
-	return tx_queue->piobuf && efx_nic_tx_is_empty(tx_queue) &&
-	       efx_nic_tx_is_empty(partner);
-}
-
 int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue, struct sk_buff *skb,
 			bool *data_mapped);
 
@@ -125,7 +99,7 @@ int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue, struct sk_buff *skb,
 static inline bool efx_nic_may_push_tx_desc(struct efx_tx_queue *tx_queue,
 					    unsigned int write_count)
 {
-	bool was_empty = __efx_nic_tx_is_empty(tx_queue, write_count);
+	bool was_empty = efx_nic_tx_is_empty(tx_queue, write_count);
 
 	tx_queue->empty_read_count = 0;
 	return was_empty && tx_queue->write_count - write_count == 1;
drivers/net/ethernet/sfc/tx.c +25 -1
index b868920b680c..48d91b26f1a2 100644
@@ -264,6 +264,30 @@ static int efx_enqueue_skb_pio(struct efx_tx_queue *tx_queue,
 	++tx_queue->insert_count;
 	return 0;
 }
+
+/* Decide whether we can use TX PIO, ie. write packet data directly into
+ * a buffer on the device.  This can reduce latency at the expense of
+ * throughput, so we only do this if both hardware and software TX rings
+ * are empty, including all queues for the channel.  This also ensures that
+ * only one packet at a time can be using the PIO buffer. If the xmit_more
+ * flag is set then we don't use this - there'll be another packet along
+ * shortly and we want to hold off the doorbell.
+ */
+static bool efx_tx_may_pio(struct efx_tx_queue *tx_queue)
+{
+	struct efx_channel *channel = tx_queue->channel;
+
+	if (!tx_queue->piobuf)
+		return false;
+
+	EFX_WARN_ON_ONCE_PARANOID(!channel->efx->type->option_descriptors);
+
+	efx_for_each_channel_tx_queue(tx_queue, channel)
+		if (!efx_nic_tx_is_empty(tx_queue, tx_queue->packet_write_count))
+			return false;
+
+	return true;
+}
 #endif /* EFX_USE_PIO */
 
 /* Send any pending traffic for a channel. xmit_more is shared across all
@@ -326,7 +350,7 @@ netdev_tx_t __efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb
 			goto err;
 #ifdef EFX_USE_PIO
 	} else if (skb_len <= efx_piobuf_size && !xmit_more &&
-		   efx_nic_may_tx_pio(tx_queue)) {
+		   efx_tx_may_pio(tx_queue)) {
 		/* Use PIO for short packets with an empty queue. */
 		if (efx_enqueue_skb_pio(tx_queue, skb))
 			goto err;
#6 lore raw

PATCH v2 6/6 sfc: remove efx_tx_queue_partner

In reply to Edward Cree

All users of this function are now gone.

---
 drivers/net/ethernet/sfc/nic_common.h | 10 ----------
 1 file changed, 10 deletions(-)
drivers/net/ethernet/sfc/nic_common.h +0 -10
index 3f88c6444fa1..82271f0b8627 100644
@@ -75,16 +75,6 @@ static inline bool efx_nic_tx_is_empty(struct efx_tx_queue *tx_queue, unsigned i
 	return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0;
 }
 
-/* Get partner of a TX queue, seen as part of the same net core queue */
-/* XXX is this a thing on EF100? */
-static inline struct efx_tx_queue *efx_tx_queue_partner(struct efx_tx_queue *tx_queue)
-{
-	if (tx_queue->label & EFX_TXQ_TYPE_OFFLOAD)
-		return tx_queue - EFX_TXQ_TYPE_OFFLOAD;
-	else
-		return tx_queue + EFX_TXQ_TYPE_OFFLOAD;
-}
-
 int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue, struct sk_buff *skb,
 			bool *data_mapped);
 
maintainer Applied
#7 lore raw
In reply to Edward Cree
Quoted 8 lines · On Thu, 3 Sep 2020 22:30:58 +0100 Edward Cree wrote:

Refactor and unify partner-TXQ handling in the EF100 and legacy drivers.

The main thrust of this series is to remove from the legacy (Siena/EF10)
driver the assumption that a netdev TX queue has precisely two hardware TXQs (checksummed and unchecksummed) associated with it, so that in future we can have more (e.g. for handling inner-header checksums) or fewer (e.g. to free up hardware queues for XDP usage).

Quoted 4 lines

Changes from v1:
* better explain patch #1 in the commit message, and rename xmit_more_available to xmit_pending
* add new patch #2 applying the same approach to ef100, for consistency

Applied, thanks!