leds: mt6360: Fix the second LED can not enable torch mode by V4L2
Subsystems (2)
PATCH 1/1 leds: mt6360: Fix the second LED can not enable torch mode by V4L2
V4L2 will disable strobe mode of the LED device when enable torch mode, but this logic will conflict with the "priv->fled_torch_used" in "mt6360_strobe_set()". So after enabling torch mode of the first LED, the second LED will not be able to enable torch mode correctly.
Therefore, at the beginning of "mt6360_strobe_set()", check whether the state of the upcoming change and the current LED device state are the same, so as to avoid the above problem.
--- drivers/leds/flash/leds-mt6360.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/leds/flash/leds-mt6360.c +11 -1
@@ -241,10 +241,20 @@ static int mt6360_strobe_set(struct led_classdev_flash *fl_cdev, bool state)u32 enable_mask =MT6360_STROBEN_MASK |MT6360_FLCSEN_MASK (led->led_no);u32 val = state ?MT6360_FLCSEN_MASK (led->led_no) :0 ;u32 prev = priv->fled_strobe_used, curr; -int ret; +int ret =0 ;mutex_lock (&priv->lock); +/* +* If the state of the upcoming change is the same as the current LED +* device state, then skip the subsequent code to avoid conflict +* with the flow of turning on LED torch mode in V4L2. +*/ +if (state == !!(BIT (led->led_no) & prev)) { +dev_info (lcdev->dev,"No change in strobe state [0x%x]\n" , prev); + goto unlock; + } +/* * Only one set of flash control logic, use the flag to avoid torch is * currently used
Signature · 1 line
2.42.0
Re: (subset) [PATCH] leds: mt6360: Fix the second LED can not enable torch mode by V4L2
Quoted 10 lines · ChiaEn Wu
V4L2 will disable strobe mode of the LED device when enable torch mode, but this logic will conflict with the "
priv->fled_torch_used" in "mt6360_strobe_set()". So after enabling torch mode of the first LED, the second LED will not be able to enable torch mode correctly.Therefore, at the beginning of "
mt6360_strobe_set()", check whether the state of the upcoming change and the current LED device state are the same, so as to avoid the above problem.[...]
Applied, thanks!
[1/1] leds: mt6360: Fix the second LED can not enable torch mode by V4L2
commit: 0dcd0488a7a5b8762256b393a8bd0c21e5e4e0fb
--
Lee Jones [李琼斯]