dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
Subsystems (4)
PATCH RESEND v3 1/1 dt-bindings: spi: brcm,bcm2835-spi: convert to dtschema
From: Kanak Shilledar <[email protected]>
Convert the Broadcom BCM2835 SPI0 controller to newer DT schema. Created DT schema based on the .txt file which had comaptible, reg, interrupts, clocks as required properties.
Added GPL-2.0 OR BSD-2-Clause License
---
Changes in v3:
- Updated DCO email address
Changes in v2:
- Updated the maintainers
--- .../bindings/spi/brcm,bcm2835-spi.txt | 23 --------- .../bindings/spi/brcm,bcm2835-spi.yaml | 50 +++++++++++++++++++ 2 files changed, 50 insertions(+), 23 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt create mode 100644 Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.yaml
Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt deleted +0 -23
@@ -1,23 +0,0 @@ -Broadcom BCM2835 SPI0 controller - -The BCM2835 contains two forms of SPI master controller, one known simply as -SPI0, and the other known as the "Universal SPI Master"; part of the -auxiliary block. This binding applies to the SPI0 controller. - -Required properties: -- compatible: Should be one of "brcm,bcm2835-spi" for BCM2835/2836/2837 or - "brcm,bcm2711-spi" for BCM2711 or "brcm,bcm7211-spi" for BCM7211. -- reg: Should contain register location and length. -- interrupts: Should contain interrupt. -- clocks: The clock feeding the SPI controller. - -Example: - -spi@20204000 { - compatible = "brcm,bcm2835-spi"; - reg = <0x7e204000 0x1000>; - interrupts = <2 22>; - clocks = <&clk_spi>; - #address-cells = <1>; - #size-cells = <0>; -};
Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.yaml new file +50 -0
50 lines not on this page · raw message
Signature · 1 line
2.34.1
Mark Brown
maintainerQuoted 5 lines · Kanak Shilledar
From: Kanak Shilledar <[email protected]>
Convert the Broadcom BCM2835 SPI0 controller to newer DT schema. Created DT schema based on the .txt file which had
comaptible,reg,interrupts,clocksas required
Please submit patches using subject lines reflecting the style for the subsystem, this makes it easier for people to identify relevant patches. Look at what existing commits in the area you're changing are doing and make sure your subject lines visually resemble what they're doing. There's no need to resubmit to fix this alone.
Quoted 10 lines · Kanak Shilledar
From: Kanak Shilledar <[email protected]>
Convert the Broadcom BCM2835 SPI0 controller to newer DT schema. Created DT schema based on the .txt file which had
comaptible,reg,interrupts,clocksas required properties.
Added GPL-2.0 OR BSD-2-Clause LicenseReviewed-by Conor Dooley <[email protected]>Signed-off-by Kanak Shilledar <[email protected]>
Signature · 1 line
Florian