Regarding P2020 core 1
Hi All,
We are coming up with a new platform that uses Freescale P2020 processor and P2020 U-Boot. In this platform, we will be using only one core (core 0) of P2020 and will be disabling the core 1 (thro, some hardware strapping as hardware folks told me).
If anybody has already investigated and knows how to disable core 1 (and support only core 0) in P2020 U-Boot (or in general, say mpc8572), please let me know. Any pointers will be very useful.
Thanks
Vinay
Quoted 5 lines · vinay hegde
Hi All,
We are coming up with a new platform that uses Freescale P2020 processor and P2020 U-Boot. In this platform, we will be using only one core (core 0) of P2020 and will be disabling the core 1 (thro, some hardware strapping as hardware folks told me).
If anybody has already investigated and knows how to disable core 1 (and support only core 0) in P2020 U-Boot (or in general, say mpc8572), please let me know. Any pointers will be very useful.
You can use the 'cpu disable' command.
- k
Hi Kumar,
I have ported U-Boot for our new platform (which is based on P2020 and has other platform specific peripherals). So, actually I wanted to know how to disable core 1 in U-boot source code (I see MPC85xx_DEVDISR_CPU0 and MPC85xx_DEVDISR_CPU1 defines in immap_85xx.h, which are not used). So, in my case, when U-boot bringup code runs, it should initialize only core 0 and keep the other core in reset.
Sorry, I think my earlier e-mail wasn't clear enough.
Thanks
Vinay
Quoted 16 lines
Quoted 3 lines
Hi All,
We are coming up with a new platform that uses
Freescale P2020 processor and P2020 U-Boot. In this platform, we will be using only one core (core 0) of P2020 and will be disabling the core 1 (thro, some hardware strapping as hardware folks told me).
Quoted 2 lines
If anybody has already investigated and knows how to
disable core 1 (and support only core 0) in P2020 U-Boot (or in general, say mpc8572), please let me know. Any pointers will be very useful.
You can use the 'cpu disable' command.
- k
You should just be able to remove CONFIG_MP from your board <CONFIG.h>
- k
Quoted 29 lines · vinay hegde
Hi Kumar,
I have ported U-Boot for our new platform (which is based on P2020 and has other platform specific peripherals). So, actually I wanted to know how to disable core 1 in U-boot source code (I see
MPC85xx_DEVDISR_CPU0andMPC85xx_DEVDISR_CPU1defines inimmap_85xx.h, which are not used). So, in my case, when U-boot bringup code runs, it should initialize only core 0 and keep the other core in reset.Sorry, I think my earlier e-mail wasn't clear enough.
Thanks
VinayQuoted 16 lines
Quoted 3 lines
Hi All,
We are coming up with a new platform that uses
Freescale P2020 processor and P2020 U-Boot. In this platform, we will be using only one core (core 0) of P2020 and will be disabling the core 1 (thro, some hardware strapping as hardware folks told me).
Quoted 2 lines
If anybody has already investigated and knows how to
disable core 1 (and support only core 0) in P2020 U-Boot (or in general, say mpc8572), please let me know. Any pointers will be very useful.
You can use the 'cpu disable' command.
- k