Skip to contentSkip to conversation

sh_eth: fix typo in RX descriptor bit name

PATCH Applied Sergei Shtylyov 2 participants 2 messages Nov 2, 2015 – Nov 3, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 sh_eth: fix typo in RX descriptor bit name

The correct name of the RX descriptor 0 bit 30 is RDLE (receive descriptor list end), not RDEL.

---
The patch is against the Dave Miller's 'net-next.git' repo.

 drivers/net/ethernet/renesas/sh_eth.c |    4 ++--
 drivers/net/ethernet/renesas/sh_eth.h |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

Index: net-next/drivers/net/ethernet/renesas/sh_eth.c =================================--- net-next.orig/drivers/net/ethernet/renesas/sh_eth.c +++ net-next/drivers/net/ethernet/renesas/sh_eth.c
@@ -1173,7 +1173,7 @@ static void sh_eth_ring_format(struct ne
mdp->dirty_rx = (u32) (i - mdp->num_rx_ring);

/* Mark the last entry as wrapping the ring. */
- rxdesc->status |= cpu_to_edmac(mdp, RD_RDEL);
+ rxdesc->status |= cpu_to_edmac(mdp, RD_RDLE);

memset(mdp->tx_ring, 0, tx_ringsize);

@@ -1547,7 +1547,7 @@ static int sh_eth_rx(struct net_device *
wmb(); /* RACT bit must be set after all the above writes */ if (entry >= mdp->num_rx_ring - 1)
rxdesc->status |- cpu_to_edmac(mdp, RD_RACT | RD_RFP | RD_RDEL);
+ cpu_to_edmac(mdp, RD_RACT | RD_RFP | RD_RDLE);
else
rxdesc->status | cpu_to_edmac(mdp, RD_RACT | RD_RFP);
Index: net-next/drivers/net/ethernet/renesas/sh_eth.h =================================--- net-next.orig/drivers/net/ethernet/renesas/sh_eth.h +++ net-next/drivers/net/ethernet/renesas/sh_eth.h
@@ -285,7 +285,7 @@ enum DMAC_IM_BIT {

/* Receive descriptor bit */
enum RD_STS_BIT {
- RD_RACT = 0x80000000, RD_RDEL = 0x40000000,
+ RD_RACT = 0x80000000, RD_RDLE = 0x40000000,
RD_RFP1 = 0x20000000, RD_RFP0 = 0x10000000, RD_RFE = 0x08000000, RD_RFS10 = 0x00000200, RD_RFS9 = 0x00000100, RD_RFS8 = 0x00000080,

maintainer Applied
#1 lore raw

From: Sergei Shtylyov <[email protected]>
Date: Tue, 03 Nov 2015 01:28:07 +0300

Quoted 7 lines

The correct name of the RX descriptor 0 bit 30 is RDLE (receive descriptor list end), not RDEL.

---
The patch is against the Dave Miller's 'net-next.git' repo.

Applied.