Add R8A7745/SK-RZG1E board support
Subsystems (5)
v2 cover Add R8A7745/SK-RZG1E board support
Hello.
Here's the set of 11 patches against Simon Horman's 'renesas.git' repo's
'renesas-devel-201611104-v4.9-rc3' tag plus the R8A7743/SK-RZG1M patch series posted earlier. I'm adding the device tree support for the R8A7745-based SK-RZG1E board. The SoC is close to R8A7794 and the board seems identical to the R8A7794/SILK board. The device tree patches depend on the R8A7745 CPG/MSSR driver series in order to compile and work.
[01/11] ARM: shmobile: r8a7745: add power domain index macros [02/11] soc: renesas: rcar-sysc: add R8A7745 support [03/11] ARM: shmobile: r8a7745: basic SoC support [04/11] ARM: dts: r8a7745: initial SoC device tree [05/11] ARM: dts: r8a7745: add SYS-DMAC support [06/11] ARM: dts: r8a7745: add [H]SCIF{|A|B} support [07/11] ARM: dts: r8a7745: add Ether support [08/11] ARM: dts: r8a7745: add IRQC support
[09/11] ARM: shmobile: document SK-RZG1E board [10/11] ARM: dts: sk-rzg1e: initial device tree [11/11] ARM: dts: sk-rzg1e: add Ether support
WBR, Sergei
A message that is not in the archive (sent off-list or not yet received): 2368353.xfo5beGC5E-gHKXc3Y1Z8zGSmamagVegGFoWSdPRAKMAL8bYrjMMd8@public.gmane.org
PATCH v2 1/11 ARM: shmobile: r8a7745: add power domain index macros
Add macros usable by the device tree sources to reference R8A7745 SYSC power domains by index.
Based on the original (and large) patch by Dmitry Shifrin <dmitry.shifrin-M4DtvfQ/[email protected]>.
---
Changes in version 2:
- added Geert's tag.
include/dt-bindings/power/r8a7745-sysc.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
include/dt-bindings/power/r8a7745-sysc.h new file +25 -0
@@ -0,0 +1,25 @@ +/* +* Copyright (C) 2016 Cogent Embedded Inc. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ +#ifndef __DT_BINDINGS_POWER_R8A7745_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A7745_SYSC_H__ + +/* +* These power domain indices match the numbers of the interrupt bits +* representing the power areas in the various Interrupt Registers +* (e.g. SYSCISR, Interrupt Status Register) +*/ + +#define R8A7745_PD_CA7_CPU0 5 +#define R8A7745_PD_CA7_CPU1 6 +#define R8A7745_PD_SGX 20 +#define R8A7745_PD_CA7_SCU 21 + +/* Always-on power area */ +#define R8A7745_PD_ALWAYS_ON 32 + +#endif /* __DT_BINDINGS_POWER_R8A7745_SYSC_H__ */
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v2 2/11 soc: renesas: rcar-sysc: add R8A7745 support
In reply to Sergei ShtylyovAdd support for RZ/G1E (R8A7745) SoC power areas to the R-Car SYSC driver.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
---
Changes in version 2:
- added Geert's tag.
Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt | 1 drivers/soc/renesas/Makefile | 1 drivers/soc/renesas/r8a7745-sysc.c | 32 ++++++++++ drivers/soc/renesas/rcar-sysc.c | 3 drivers/soc/renesas/rcar-sysc.h | 1 5 files changed, 38 insertions(+)
Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt +1 -0
@@ -8,6 +8,7 @@ and various coprocessors. Required properties: - compatible: Must contain exactly one of the following: - "renesas,r8a7743-sysc" (RZ/G1M) + - "renesas,r8a7745-sysc" (RZ/G1E) - "renesas,r8a7779-sysc" (R-Car H1) - "renesas,r8a7790-sysc" (R-Car H2) - "renesas,r8a7791-sysc" (R-Car M2-W)
drivers/soc/renesas/Makefile +1 -0
@@ -4,6 +4,7 @@ obj-$(CONFIG_ARCH_R8A7795) += rcar-rst.o obj-$(CONFIG_ARCH_R8A7796) += rcar-rst.o obj-$(CONFIG_ARCH_R8A7743) += rcar-sysc.o r8a7743-sysc.o +obj-$(CONFIG_ARCH_R8A7745) += rcar-sysc.o r8a7745-sysc.o obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o r8a7779-sysc.o obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o r8a7790-sysc.o obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o r8a7791-sysc.o
drivers/soc/renesas/r8a7745-sysc.c new file +32 -0
@@ -0,0 +1,32 @@ +/* +* Renesas RZ/G1E System Controller +* +* Copyright (C) 2016 Cogent Embedded Inc. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation; of the License. +*/ + +#include <linux/bug.h> +#include <linux/kernel.h> + +#include <dt-bindings/power/r8a7745-sysc.h> + +#include "rcar-sysc.h" + +static const struct rcar_sysc_area r8a7745_areas[]__initconst = { + {"always-on" ,0 ,0 ,R8A7745_PD_ALWAYS_ON ,-1 ,PD_ALWAYS_ON }, + {"ca7-scu" ,0x100 ,0 ,R8A7745_PD_CA7_SCU ,R8A7745_PD_ALWAYS_ON , +PD_SCU }, + {"ca7-cpu0" ,0x1c0 ,0 ,R8A7745_PD_CA7_CPU0 ,R8A7745_PD_CA7_SCU , +PD_CPU_NOCR }, + {"ca7-cpu1" ,0x1c0 ,1 ,R8A7745_PD_CA7_CPU1 ,R8A7745_PD_CA7_SCU , +PD_CPU_NOCR }, + {"sgx" ,0xc0 ,0 ,R8A7745_PD_SGX ,R8A7745_PD_ALWAYS_ON }, +}; + +const struct rcar_sysc_info r8a7745_sysc_info__initconst = { + .areas = r8a7745_areas, + .num_areas =ARRAY_SIZE (r8a7745_areas), +};
drivers/soc/renesas/rcar-sysc.c +3 -0
@@ -278,6 +278,9 @@ static const struct of_device_id rcar_sy #ifdef CONFIG_ARCH_R8A7743 { .compatible = "renesas,r8a7743-sysc", .data = &r8a7743_sysc_info }, #endif +#ifdef CONFIG_ARCH_R8A7745 + { .compatible = "renesas,r8a7745-sysc", .data = &r8a7745_sysc_info }, +#endif #ifdef CONFIG_ARCH_R8A7779 { .compatible = "renesas,r8a7779-sysc", .data = &r8a7779_sysc_info }, #endif
drivers/soc/renesas/rcar-sysc.h +1 -0
@@ -51,6 +51,7 @@ struct rcar_sysc_info { };extern const struct rcar_sysc_info r8a7743_sysc_info; +extern const struct rcar_sysc_info r8a7745_sysc_info;extern const struct rcar_sysc_info r8a7779_sysc_info;extern const struct rcar_sysc_info r8a7790_sysc_info;extern const struct rcar_sysc_info r8a7791_sysc_info;
Re: [PATCH v2 02/11] soc: renesas: rcar-sysc: add R8A7745 support
Quoted 5 lines · Sergei Shtylyov
Add support for RZ/G1E (R8A7745) SoC power areas to the R-Car SYSC driver.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
Quoted 8 lines
Signed-off-by Sergei Shtylyov <[email protected]>Reviewed-by Geert Uytterhoeven <[email protected]>---
Changes in version 2:
- added Geert's tag.Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt | 1
Quoted 5 lines
drivers/soc/renesas/Makefile | 1 drivers/soc/renesas/r8a7745-sysc.c | 32 ++++++++++ drivers/soc/renesas/rcar-sysc.c | 3 drivers/soc/renesas/rcar-sysc.h | 1 5 files changed, 38 insertions(+)
PATCH v2 3/11 ARM: shmobile: r8a7745: basic SoC support
In reply to Sergei ShtylyovAdd minimal support for the RZ/G1E (R8A7745) SoC.
---
Changes in version 2:
- added Geert's tag;
- refreshed the patch.
Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++ arch/arm/mach-shmobile/Kconfig | 4 ++++ arch/arm/mach-shmobile/setup-rcar-gen2.c | 1 + 3 files changed, 7 insertions(+)
Documentation/devicetree/bindings/arm/shmobile.txt +2 -0
@@ -15,6 +15,8 @@ SoCs: compatible = "renesas,r8a7740" - RZ/G1M (R8A77430) compatible = "renesas,r8a7743" + - RZ/G1E (R8A77450) + compatible = "renesas,r8a7745" - R-Car M1A (R8A77781) compatible = "renesas,r8a7778" - R-Car H1 (R8A77790)
arch/arm/mach-shmobile/Kconfig +4 -0
@@ -73,6 +73,10 @@ config ARCH_R8A7743 select ARCH_RCAR_GEN2 select ARM_ERRATA_798181 if SMP +config ARCH_R8A7745 + bool "RZ/G1E (R8A77450)" + select ARCH_RCAR_GEN2 + config ARCH_R8A7778 bool "R-Car M1A (R8A77781)" select ARCH_RCAR_GEN1
arch/arm/mach-shmobile/setup-rcar-gen2.c +1 -0
@@ -227,6 +227,7 @@ MACHINE_ENDstatic const char *const rz_g1_boards_compat_dt[]__initconst = {"renesas,r8a7743" , +"renesas,r8a7745" ,NULL , };
Rob Herring
maintainerPATCH v2 3/11 ARM: shmobile: r8a7745: basic SoC support
Quoted 10 lines · Sergei Shtylyov
Add minimal support for the RZ/G1E (R8A7745) SoC.
Signed-off-by Sergei Shtylyov <[email protected]>Reviewed-by Geert Uytterhoeven <[email protected]>---
Changes in version 2:
- added Geert's tag;
- refreshed the patch.
Quoted 4 lines
Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++ arch/arm/mach-shmobile/Kconfig | 4 ++++ arch/arm/mach-shmobile/setup-rcar-gen2.c | 1 + 3 files changed, 7 insertions(+)
PATCH v2 4/11 ARM: dts: r8a7745: initial SoC device tree
In reply to Sergei ShtylyovThe initial R8A7745 SoC device tree including CPU0, GIC, timer, SYSC, RST, CPG, and the required clock descriptions.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
---
Changes in version 2:
- reformatted the "interrupts" props of the GIC/timer device nodes;
- added Geert's tag.
arch/arm/boot/dts/r8a7745.dtsi | 120 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 120 insertions(+)
arch/arm/boot/dts/r8a7745.dtsi new file +120 -0
@@ -0,0 +1,120 @@ +/* + * Device Tree Source for the r8a7745 SoC + * + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r8a7745-cpg-mssr.h> +#include <dt-bindings/power/r8a7745-sysc.h> + +/ { + compatible = "renesas,r8a7745"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>; + power-domains = <&sysc R8A7745_PD_CA7_CPU0>; + next-level-cache = <&L2_CA7>; + }; + + L2_CA7: cache-controller at 0 { + compatible = "cache"; + reg = <0>; + cache-unified; + cache-level = <2>; + power-domains = <&sysc R8A7745_PD_CA7_SCU>; + }; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller at f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + cpg: clock-controller at e6150000 { + compatible = "renesas,r8a7745-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + }; + + sysc: system-controller at e6180000 { + compatible = "renesas,r8a7745-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + + rst: reset-controller at e6160000 { + compatible = "renesas,r8a7745-rst"; + reg = <0 0xe6160000 0 0x100>; + }; + }; + + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; +};
PATCH v2 5/11 ARM: dts: r8a7745: add SYS-DMAC support
In reply to Sergei ShtylyovDescribe SYS-DMAC0/1 in the R8A7745 device tree.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
---
Changes in version 2:
- added Geert's tag;
- refreshed the patch.
arch/arm/boot/dts/r8a7745.dtsi | 64 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+)
arch/arm/boot/dts/r8a7745.dtsi +64 -0
@@ -93,6 +93,70 @@ compatible = "renesas,r8a7745-rst"; reg = <0 0xe6160000 0 0x0200>; }; + + dmac0: dma-controller at e6700000 { + compatible = "renesas,dmac-r8a7745", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller at e6720000 { + compatible = "renesas,dmac-r8a7745", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; }; /* External root clock */
PATCH v2 6/11 ARM: dts: r8a7745: add [H]SCIF{|A|B} support
In reply to Sergei ShtylyovDescribe [H]SCIF{|A|B} ports in the R8A7745 device tree.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
---
Changes in version 2:
- used the R-Car gen2 bindings instead of the RZ/G family ones;
- added Geert's tag.
arch/arm/boot/dts/r8a7745.dtsi | 261 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 261 insertions(+)
arch/arm/boot/dts/r8a7745.dtsi +261 -0
@@ -157,6 +157,267 @@ #dma-cells = <1>; dma-channels = <15>; }; + + scifa0: serial at e6c40000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa1: serial at e6c50000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>; + clock-names = "fck"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa2: serial at e6c60000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c60000 0 0x40>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>; + clock-names = "fck"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa3: serial at e6c70000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c70000 0 0x40>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1106>; + clock-names = "fck"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa4: serial at e6c78000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c78000 0 0x40>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1107>; + clock-names = "fck"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa5: serial at e6c80000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c80000 0 0x40>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1108>; + clock-names = "fck"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb0: serial at e6c20000 { + compatible = "renesas,scifb-r8a7745", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>; + clock-names = "fck"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb1: serial at e6c30000 { + compatible = "renesas,scifb-r8a7745", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>; + clock-names = "fck"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb2: serial at e6ce0000 { + compatible = "renesas,scifb-r8a7745", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif0: serial at e6e60000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 721>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif1: serial at e6e68000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 720>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif2: serial at e6e58000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e58000 0 0x40>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 719>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif3: serial at e6ea8000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ea8000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 718>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif4: serial at e6ee0000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee0000 0 0x40>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif5: serial at e6ee8000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee8000 0 0x40>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif0: serial at e62c0000 { + compatible = "renesas,hscif-r8a7745", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif1: serial at e62c8000 { + compatible = "renesas,hscif-r8a7745", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif2: serial at e62d0000 { + compatible = "renesas,hscif-r8a7745", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62d0000 0 0x60>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 713>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; }; /* External root clock */
PATCH v2 7/11 ARM: dts: r8a7745: add Ether support
In reply to Sergei ShtylyovDefine the generic R8A7745 part of the Ether device node.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
---
Changes in version 2:
- added Geert's tag.
arch/arm/boot/dts/r8a7745.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/arm/boot/dts/r8a7745.dtsi +12 -0
@@ -418,6 +418,18 @@ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; status = "disabled"; }; + + ether: ethernet at ee700000 { + compatible = "renesas,ether-r8a7745"; + reg = <0 0xee700000 0 0x400>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; /* External root clock */
PATCH v2 8/11 ARM: dts: r8a7745: add IRQC support
In reply to Sergei ShtylyovDescribe the IRQC interrupt controller in the R8A7745 device tree.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
---
Changes in version 2:
- added Geert's tag;
- refreshed the patch.
arch/arm/boot/dts/r8a7745.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
arch/arm/boot/dts/r8a7745.dtsi +19 -0
@@ -62,6 +62,25 @@ IRQ_TYPE_LEVEL_HIGH)>; }; + irqc: interrupt-controller at e61c0000 { + compatible = "renesas,irqc-r8a7745", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
PATCH v2 9/11 ARM: shmobile: document SK-RZG1E board
In reply to Sergei ShtylyovDocument the SK-RZG1E device tree bindings, listing it as a supported board.
This allows to use checkpatch.pl to validate .dts files referring to the SK-RZG1E board.
---
Changes in version 2:
- fixed the subject;
- added Geert's tag.
Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/arm/shmobile.txt +2 -0
@@ -77,6 +77,8 @@ Boards: compatible = "renesas,salvator-x", "renesas,r8a7796"; - SILK (RTP0RC7794LCB00011S) compatible = "renesas,silk", "renesas,r8a7794" + - SK-RZG1E (YR8A77450S000BE) + compatible = "renesas,sk-rzg1e", "renesas,r8a7745" - SK-RZG1M (YR8A77430S000BE) compatible = "renesas,sk-rzg1m", "renesas,r8a7743" - Wheat
Re: [PATCH v2 09/11] ARM: shmobile: document SK-RZG1E board
Quoted 8 lines · Sergei Shtylyov
Document the SK-RZG1E device tree bindings, listing it as a supported board.
This allows to use checkpatch.pl to validate .dts files referring to the SK-RZG1E board.
Signed-off-by Sergei Shtylyov <[email protected]>Reviewed-by Geert Uytterhoeven <[email protected]>
Quoted 7 lines
---
Changes in version 2:
- fixed the subject;
- added Geert's tag.Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++ 1 file changed, 2 insertions(+)
PATCH v2 10/11 ARM: dts: sk-rzg1e: initial device tree
In reply to Sergei ShtylyovAdd the initial device tree for the R8A7745 SoC based SK-RZG1E board. The board has 1 debug serial port (SCIF2); include support for it, so that the serial console can work.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
---
Changes in version 2:
- added Geert's tag.
arch/arm/boot/dts/Makefile | 1 arch/arm/boot/dts/r8a7745-sk-rzg1e.dts | 39 +++++++++++++++++++++++++++++++++ 2 files changed, 40 insertions(+)
arch/arm/boot/dts/Makefile +1 -0
@@ -678,6 +678,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ r8a7743-sk-rzg1m.dtb \ + r8a7745-sk-rzg1e.dtb \ r8a7778-bockw.dtb \ r8a7779-marzen.dtb \ r8a7790-lager.dtb \
arch/arm/boot/dts/r8a7745-sk-rzg1e.dts new file +39 -0
@@ -0,0 +1,39 @@ +/* + * Device Tree Source for the SK-RZG1E board + * + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7745.dtsi" + +/ { + model = "SK-RZG1E"; + compatible = "renesas,sk-rzg1e", "renesas,r8a7745"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = "serial0:115200n8"; + }; + + memory at 40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&scif2 { + status = "okay"; +};
PATCH v2 11/11 ARM: dts: sk-rzg1e: add Ether support
In reply to Sergei ShtylyovDefine the SK-RZG1E board dependent part of the Ether device node. Enable DHCP and NFS root for the kernel booting.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
---
Changes in version 2:
- added Geert's tag.
arch/arm/boot/dts/r8a7745-sk-rzg1e.dts | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
arch/arm/boot/dts/r8a7745-sk-rzg1e.dts +14 -1
@@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; };
@@ -37,3 +37,16 @@ &scif2 { status = "okay"; }; + +ðer { + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy at 1 { + reg = <1>; + interrupt-parent = <&irqc>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +};
v2 cover Add R8A7745/SK-RZG1E board support
In reply to Sergei ShtylyovQuoted 8 lines · Sergei Shtylyov
Hello.
Here's the set of 11 patches against Simon Horman's 'renesas.git' repo's
'renesas-devel-201611104-v4.9-rc3' tag plus the R8A7743/SK-RZG1M patch series posted earlier. I'm adding the device tree support for the R8A7745-based SK-RZG1E board. The SoC is close to R8A7794 and the board seems identical to the R8A7794/SILK board. The device tree patches depend on the R8A7745 CPG/MSSR driver series in order to compile and work.
Thanks, I have queued this up.
PATCH 1/1 arm64: dts: renesas: r8a77980: add INTC-EX support
In reply to Sergei ShtylyovDescribe the INTC-EX interrupt controller in the R8A77980 device tree.
Based on the original (and large) patch by Vladimir Barinov.
---
This patch is against the 'renesas-devel-20180717-v4.18-rc5' tag of Simon Horman's 'renesas.git' repo.
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
arch/arm64/boot/dts/renesas/r8a77980.dtsi +16 -0
@@ -234,6 +234,22 @@ #power-domain-cells = <1>; }; + intc_ex: interrupt-controller at e61c0000 { + compatible = "renesas,intc-ex-r8a77980", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + i2c0: i2c at e6500000 { compatible = "renesas,i2c-r8a77980", "renesas,rcar-gen3-i2c";
PATCH 1/1 arm64: dts: renesas: r8a77980: add INTC-EX support
Quoted 6 lines · Sergei Shtylyov
Describe the INTC-EX interrupt controller in the R8A77980 device tree.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by Vladimir Barinov <[email protected]>Signed-off-by Sergei Shtylyov <[email protected]>
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus TorvaldsPATCH 1/1 arm64: dts: renesas: r8a77980: add INTC-EX support
In reply to Sergei ShtylyovQuoted 6 lines · Sergei Shtylyov
Describe the INTC-EX interrupt controller in the R8A77980 device tree.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by Vladimir Barinov <[email protected]>Signed-off-by Sergei Shtylyov <[email protected]>
Thanks Sergei, applied.
PATCH 1/1 arm64: dts: renesas: r8a77980: add RWDT support
In reply to Sergei ShtylyovDescribe RWDT in the R8A77980 SoC device tree.
Enable RWDT on the Condor and V3H Starter Kit boards.
Based on the original (and large) patch by Vladimir Barinov.
---
The patch is against the 'renesas-devel-20180720-v4.18-rc5' of Simon Horman's 'renesas.git' repo. It depends on Geert Uytterhoeven's clock driver patches (adding the RWDT clock) in order to work...
arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 5 +++++ arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 5 +++++ arch/arm64/boot/dts/renesas/r8a77980.dtsi | 10 ++++++++++ 3 files changed, 20 insertions(+)
arch/arm64/boot/dts/renesas/r8a77980-condor.dts +5 -0
@@ -262,6 +262,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; pinctrl-names = "default";
arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +5 -0
@@ -191,6 +191,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; pinctrl-names = "default";
arch/arm64/boot/dts/renesas/r8a77980.dtsi +10 -0
@@ -118,6 +118,16 @@ #size-cells = <2>; ranges; + rwdt: watchdog at e6020000 { + compatible = "renesas,r8a77980-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + gpio0: gpio at e6050000 { compatible = "renesas,gpio-r8a77980", "renesas,rcar-gen3-gpio";
PATCH 1/1 arm64: dts: renesas: r8a77980: add RWDT support
Quoted 6 lines · Sergei Shtylyov
Describe RWDT in the R8A77980 SoC device tree.
Enable RWDT on the Condor and V3H Starter Kit boards.
Based on the original (and large) patch by Vladimir Barinov.
Quoted 7 lines
Signed-off-by Vladimir Barinov <[email protected]>Signed-off-by Sergei Shtylyov <[email protected]>---
The patch is against the 'renesas-devel-20180720-v4.18-rc5' of Simon Horman's 'renesas.git' repo. It depends on Geert Uytterhoeven's clock driver patches (adding the RWDT clock) in order to work...
But it is safe to apply without those patches, right?
PATCH 1/1 arm64: dts: renesas: r8a77980: add RWDT support
Quoted 9 lines · Simon Horman
Quoted 9 lines
Describe RWDT in the R8A77980 SoC device tree.
Enable RWDT on the Condor and V3H Starter Kit boards.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by Vladimir Barinov <[email protected]>Signed-off-by Sergei Shtylyov <[email protected]>
Quoted 6 lines
Quoted 4 lines
---
The patch is against the 'renesas-devel-20180720-v4.18-rc5' of Simon Horman's 'renesas.git' repo. It depends on Geert Uytterhoeven's clock driver patches (adding the RWDT clock) in order to work...But it is safe to apply without those patches, right?
The RWDT driver should just fail to probe with -ENOENT.
Quoted 1 line
Reviewed-by Simon Horman <[email protected]>
TY!
MBR, Sergei
PATCH 1/1 arm64: dts: renesas: r8a77980: add RWDT support
In reply to Sergei ShtylyovQuoted 8 lines · Sergei Shtylyov
Describe RWDT in the R8A77980 SoC device tree.
Enable RWDT on the Condor and V3H Starter Kit boards.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by Vladimir Barinov <[email protected]>Signed-off-by Sergei Shtylyov <[email protected]>
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus TorvaldsSimon Horman
AppliedPATCH 1/1 arm64: dts: renesas: r8a77980: add RWDT support
Quoted 19 lines · Sergei Shtylyov
Quoted 9 lines · Simon Horman
Quoted 9 lines
Describe RWDT in the R8A77980 SoC device tree.
Enable RWDT on the Condor and V3H Starter Kit boards.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by Vladimir Barinov <[email protected]>Signed-off-by Sergei Shtylyov <[email protected]>Quoted 6 lines
Quoted 4 lines
---
The patch is against the 'renesas-devel-20180720-v4.18-rc5' of Simon Horman's 'renesas.git' repo. It depends on Geert Uytterhoeven's clock driver patches (adding the RWDT clock) in order to work...But it is safe to apply without those patches, right?
The RWDT driver should just fail to probe with
-ENOENT.
...
Quoted 4 lines · Geert Uytterhoeven
Quoted 2 lines · Sergei Shtylyov
Describe RWDT in the R8A77980 SoC device tree.
Quoted 8 lines
Quoted 6 lines
Enable RWDT on the Condor and V3H Starter Kit boards.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by Vladimir Barinov <[email protected]>Signed-off-by Sergei Shtylyov <[email protected]>Reviewed-by Geert Uytterhoeven <[email protected]>
Thanks, applied for v4.20.
PATCH 1/1 arm64: dts: renesas: r8a77980: add RWDT support
Hello!
On 07/24/2018 02:45 PM, Simon Horman wrote:
[...]
Quoted 7 lines · Geert Uytterhoeven
Quoted 6 lines
Quoted 4 lines · Sergei Shtylyov
Describe RWDT in the R8A77980 SoC device tree.
Enable RWDT on the Condor and V3H Starter Kit boards.
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by Vladimir Barinov <[email protected]>Signed-off-by Sergei Shtylyov <[email protected]>Reviewed-by Geert Uytterhoeven <[email protected]>Thanks, applied for v4.20.
Sorry, still not seeing any 'devel' branch updates... forgot to push?
MBR, Sergei
PATCH 1/1 arm64: dts: renesas: r8a77980: add RWDT support
Quoted 14 lines · Sergei Shtylyov
Hello!
On 07/24/2018 02:45 PM, Simon Horman wrote:
[...]
Quoted 9 lines · Geert Uytterhoeven
Quoted 8 lines
Quoted 6 lines · Sergei Shtylyov
Describe RWDT in the R8A77980 SoC device tree.
Enable RWDT on the Condor and V3H Starter Kit boards.
Based on the original (and large) patch by Vladimir Barinov.
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
Signed-off-by Vladimir Barinov <[email protected]>Signed-off-by Sergei Shtylyov <[email protected]>Reviewed-by Geert Uytterhoeven <[email protected]>Thanks, applied for v4.20.
Sorry, still not seeing any 'devel' branch updates... forgot to push?
I did push but, as discussed elsewhere, it seems that there was a glitch in The Matrix. Updates are now there after repushing them.
PATCH 1/1 arm64: dts: renesas: r8a77980: add Cortex-A53 PMU support
In reply to Sergei ShtylyovDescribe the performance monitor unit (PMU) for the Cortex-A53 cores in the R8A77970 SoC's device tree.
Based on the original (and large) patch by Vladimir Barinov.
---
The patch is against the 'renesas-devel-20180724-v4.18-rc6' tag of Simon Horman's 'renesas.git' repo.
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/arm64/boot/dts/renesas/r8a77980.dtsi +9 -0
@@ -98,6 +98,15 @@ clock-frequency = <0>; }; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc";
PATCH 1/1 arm64: dts: renesas: r8a77980: add Cortex-A53 PMU support
Quoted 2 lines · Sergei Shtylyov
Describe the performance monitor unit (PMU) for the Cortex-A53 cores in the R8A77970 SoC's device tree.
8?
Can you hack up a check in checkpatch.pl to catch such mistakes? ;-)
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus TorvaldsPATCH 1/1 arm64: dts: renesas: r8a77980: add Cortex-A53 PMU support
Quoted 6 lines · Geert Uytterhoeven
Quoted 2 lines · Sergei Shtylyov
Describe the performance monitor unit (PMU) for the Cortex-A53 cores in the R8A77970 SoC's device tree.
8?
With that fixes:
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus TorvaldsPATCH 1/1 arm64: dts: renesas: r8a77980: add Cortex-A53 PMU support
Quoted 10 lines · Geert Uytterhoeven
Quoted 6 lines · Geert Uytterhoeven
Quoted 2 lines · Sergei Shtylyov
Describe the performance monitor unit (PMU) for the Cortex-A53 cores in the R8A77970 SoC's device tree.
8?
With that fixes:
Reviewed-by Geert Uytterhoeven <[email protected]>
Thanks, I have applied the following for v4.20.
From: Sergei Shtylyov <[email protected]>
Subject: [PATCH] arm64: dts: renesas: r8a77980: add Cortex-A53 PMU support
Describe the performance monitor unit (PMU) for the Cortex-A53 cores in the R8A77980 SoC's device tree.
Based on the original (and large) patch by Vladimir Barinov.
--- arch/arm64/boot/dts/renesas/r8a77980.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/arm64/boot/dts/renesas/r8a77980.dtsi +9 -0
@@ -98,6 +98,15 @@ clock-frequency = <0>; }; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc";
Signature · 1 line
2.11.0
PATCH 1/1 arm64: dts: renesas: r8a77980: move IPMMU nodes
In reply to Sergei ShtylyovThe IPMMU nodes should follow the GEther node, not the CAN-FD node, according to the <unit-address> part of the startng IPMMU-DS1 node. While moving the nodes, also do sort them by label alphanumerically...
---
The patch is against the 'renesas-devel-20180726-v4.18-rc6' tag of Simon Horman's 'renesas.git' repo.
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 126 +++++++++++++++--------------- 1 file changed, 63 insertions(+), 63 deletions(-)
arch/arm64/boot/dts/renesas/r8a77980.dtsi +63 -63
@@ -462,69 +462,6 @@ }; }; - ipmmu_ds1: mmu at e7740000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe7740000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 0>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vip0: mmu at e7b00000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe7b00000 0 0x1000>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vip1: mmu at e7960000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe7960000 0 0x1000>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_ir: mmu at ff8b0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xff8b0000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 3>; - power-domains = <&sysc R8A77980_PD_A3IR>; - #iommu-cells = <1>; - }; - - ipmmu_mm: mmu at e67b0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe67b0000 0 0x1000>; - interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_rt: mmu at ffc80000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xffc80000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 10>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vc0: mmu at fe6b0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xfe6b0000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 12>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vi0: mmu at febd0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xfebd0000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 14>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - avb: ethernet at e6800000 { compatible = "renesas,etheravb-r8a77980", "renesas,etheravb-rcar-gen3";
@@ -722,6 +659,69 @@ status = "disabled"; }; + ipmmu_ds1: mmu at e7740000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: mmu at ff8b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A77980_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu at e67b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: mmu at ffc80000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu at fe6b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu at febd0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip0: mmu at e7b00000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7b00000 0 0x1000>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip1: mmu at e7960000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7960000 0 0x1000>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + mmc0: mmc at ee140000 { compatible = "renesas,sdhi-r8a77980", "renesas,rcar-gen3-sdhi";
PATCH 1/1 arm64: dts: renesas: r8a77980: move IPMMU nodes
Quoted 5 lines · Sergei Shtylyov
The IPMMU nodes should follow the GEther node, not the CAN-FD node, according to the <unit-address> part of the startng IPMMU-DS1 node. While moving the nodes, also do sort them by label alphanumerically...
Signed-off-by Sergei Shtylyov <[email protected]>
Thanks Sergei, applied for v4.20.
PATCH 1/1 arm64: dts: renesas: r8a779{7|8}0: move CAN clock node
In reply to Sergei ShtylyovThe CAN clock node should precede the "cpus" node in the R8A779{7|8}0 device trees, according to the alphanumeric node sorting rule...
---
The patch is against the 'renesas-devel-20180726-v4.18-rc6' tag of Simon Horman's 'renesas.git' repo.
arch/arm64/boot/dts/renesas/r8a77970.dtsi | 14 +++++++------- arch/arm64/boot/dts/renesas/r8a77980.dtsi | 14 +++++++------- 2 files changed, 14 insertions(+), 14 deletions(-)
arch/arm64/boot/dts/renesas/r8a77970.dtsi +7 -7
@@ -24,6 +24,13 @@ i2c4 = &i2c4; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>;
@@ -82,13 +89,6 @@ method = "smc"; }; - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - /* External SCIF clock - to be overridden by boards that provide it */ scif_clk: scif { compatible = "fixed-clock";
arch/arm64/boot/dts/renesas/r8a77980.dtsi +7 -7
@@ -25,6 +25,13 @@ i2c5 = &i2c5; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>;
@@ -77,13 +84,6 @@ }; }; - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>;
PATCH 1/1 arm64: dts: renesas: r8a779{7|8}0: move CAN clock node
Quoted 4 lines · Sergei Shtylyov
The CAN clock node should precede the "cpus" node in the R8A779{7|8}0 device trees, according to the alphanumeric node sorting rule...
Signed-off-by Sergei Shtylyov <[email protected]>
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus TorvaldsSimon Horman
AppliedPATCH 1/1 arm64: dts: renesas: r8a779{7|8}0: move CAN clock node
Quoted 8 lines · Geert Uytterhoeven
Quoted 4 lines · Sergei Shtylyov
The CAN clock node should precede the "cpus" node in the R8A779{7|8}0 device trees, according to the alphanumeric node sorting rule...
Signed-off-by Sergei Shtylyov <[email protected]>Reviewed-by Geert Uytterhoeven <[email protected]>
Thanks, applied for v4.20.
PATCH 1/1 arm64: dts: renesas: r8a77980: add CSI2/VIN support
In reply to Sergei ShtylyovDescribe the CSI2 and VIN (and their interconnections) in the R8A77980 device tree.
---
This patch is against the 'renesas-devel-20180802v2-v4.18-rc7' branch of Simon Horman's 'renesas.git' repo.
The R8A77980 CSI2/VIN DT binding updates have been posted earlier today...
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 374 ++++++++++++++++++++++++++++++ 1 file changed, 374 insertions(+)
arch/arm64/boot/dts/renesas/r8a77980.dtsi +374 -0
@@ -579,6 +579,302 @@ status = "disabled"; }; + vin0: video at e6ef0000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin0>; + }; + }; + }; + }; + + vin1: video at e6ef1000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + status = "disabled"; + resets = <&cpg 810>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin1csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin1>; + }; + }; + }; + }; + + vin2: video at e6ef2000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin2>; + }; + }; + }; + }; + + vin3: video at e6ef3000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 808>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin3csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin3>; + }; + }; + }; + }; + + vin4: video at e6ef4000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 807>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin4>; + }; + }; + }; + }; + + vin5: video at e6ef5000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 806>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin5>; + }; + }; + }; + }; + + vin6: video at e6ef6000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 805>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin6csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin6>; + }; + }; + }; + }; + + vin7: video at e6ef7000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 804>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin7csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin7>; + }; + }; + }; + }; + + vin8: video at e6ef8000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef8000 0 0x1000>; + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + vin9: video at e6ef9000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef9000 0 0x1000>; + interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 627>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 627>; + status = "disabled"; + }; + + vin10: video at e6efa000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efa000 0 0x1000>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 625>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 625>; + status = "disabled"; + }; + + vin11: video at e6efb000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efb000 0 0x1000>; + interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 618>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 618>; + status = "disabled"; + }; + + vin12: video at e6efc000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efc000 0 0x1000>; + interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 612>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 612>; + status = "disabled"; + }; + + vin13: video at e6efd000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efd000 0 0x1000>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 608>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 608>; + status = "disabled"; + }; + + vin14: video at e6efe000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efe000 0 0x1000>; + interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 605>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 605>; + status = "disabled"; + }; + + vin15: video at e6eff000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6eff000 0 0x1000>; + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 604>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 604>; + status = "disabled"; + }; + dmac1: dma-controller at e7300000 { compatible = "renesas,dmac-r8a77980", "renesas,rcar-dmac";
@@ -769,6 +1065,84 @@ resets = <&cpg 603>; }; + csi40: csi2 at feaa0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint at 0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint at 1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint at 2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint at 3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + }; + }; + }; + + csi41: csi2 at feab0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi41vin4: endpoint at 0 { + reg = <0>; + remote-endpoint = <&vin4csi41>; + }; + csi41vin5: endpoint at 1 { + reg = <1>; + remote-endpoint = <&vin5csi41>; + }; + csi41vin6: endpoint at 2 { + reg = <2>; + remote-endpoint = <&vin6csi41>; + }; + csi41vin7: endpoint at 3 { + reg = <3>; + remote-endpoint = <&vin7csi41>; + }; + }; + }; + }; + du: display at feb00000 { compatible = "renesas,du-r8a77980", "renesas,du-r8a77970";
PATCH 1/1 arm64: dts: renesas: r8a77980: add CSI2/VIN support
Quoted 358 lines · Sergei Shtylyov
Describe the CSI2 and VIN (and their interconnections) in the R8A77980 device tree.
Signed-off-by Sergei Shtylyov <[email protected]>---
This patch is against the 'renesas-devel-20180802v2-v4.18-rc7' branch of Simon Horman's 'renesas.git' repo.The R8A77980 CSI2/VIN DT binding updates have been posted earlier today...
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 374 ++++++++++++++++++++++++++++++ 1 file changed, 374 insertions(+)Index:
renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================arch/arm64/boot/dts/renesas/r8a77980.dtsi +329
-0@@ -579,6 +579,302 @@ status = "disabled"; }; + vin0: video at e6ef0000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin0>; + }; + }; + }; + }; + + vin1: video at e6ef1000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + status = "disabled"; + resets = <&cpg 810>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin1csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin1>; + }; + }; + }; + }; + + vin2: video at e6ef2000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin2>; + }; + }; + }; + }; + + vin3: video at e6ef3000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 808>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin3csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin3>; + }; + }; + }; + }; + + vin4: video at e6ef4000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 807>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin4>; + }; + }; + }; + }; + + vin5: video at e6ef5000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 806>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin5>; + }; + }; + }; + }; + + vin6: video at e6ef6000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 805>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin6csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin6>; + }; + }; + }; + }; + + vin7: video at e6ef7000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 804>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin7csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin7>; + }; + }; + }; + }; + + vin8: video at e6ef8000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef8000 0 0x1000>; + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + vin9: video at e6ef9000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef9000 0 0x1000>; + interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 627>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 627>; + status = "disabled"; + }; + + vin10: video at e6efa000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efa000 0 0x1000>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 625>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 625>; + status = "disabled"; + }; + + vin11: video at e6efb000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efb000 0 0x1000>; + interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 618>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 618>; + status = "disabled"; + }; + + vin12: video at e6efc000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efc000 0 0x1000>; + interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 612>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 612>; + status = "disabled"; + }; + + vin13: video at e6efd000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efd000 0 0x1000>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 608>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 608>; + status = "disabled"; + }; + + vin14: video at e6efe000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efe000 0 0x1000>; + interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 605>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 605>; + status = "disabled"; + }; + + vin15: video at e6eff000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6eff000 0 0x1000>; + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 604>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 604>; + status = "disabled"; + }; + dmac1: dma-controller at e7300000 { compatible = "renesas,dmac-r8a77980", "renesas,rcar-dmac";@@ -769,6 +1065,84 @@ resets = <&cpg 603>; }; + csi40: csi2 at feaa0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint at 0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint at 1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint at 2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint at 3 { + reg = <3>;
arch/arm64/boot/dts/renesas/r8a77980.dtsi line 1110
Quoted 10 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi +10
-0+ remote-endpoint = <&vin3csi40>; + }; + }; + }; + }; + + csi41: csi2 at feab0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
The use of GIC_SPI 246 for both csi40 and csi41 seems suspicious. Is this intentional?
arch/arm64/boot/dts/renesas/r8a77980.dtsi line 1111
Quoted 1 line
arch/arm64/boot/dts/renesas/r8a77980.dtsi +1
-0+ clocks = <&cpg CPG_MOD 716>;
Should this clock be 715 rather than 716?
Quoted 38 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi +34
-0+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi41vin4: endpoint at 0 { + reg = <0>; + remote-endpoint = <&vin4csi41>; + }; + csi41vin5: endpoint at 1 { + reg = <1>; + remote-endpoint = <&vin5csi41>; + }; + csi41vin6: endpoint at 2 { + reg = <2>; + remote-endpoint = <&vin6csi41>; + }; + csi41vin7: endpoint at 3 { + reg = <3>; + remote-endpoint = <&vin7csi41>; + }; + }; + }; + }; + du: display at feb00000 { compatible = "renesas,du-r8a77980", "renesas,du-r8a77970";
PATCH 1/1 arm64: dts: renesas: r8a77980: add CSI2/VIN support
Quoted 18 lines · Simon Horman
Quoted 18 lines
Describe the CSI2 and VIN (and their interconnections) in the R8A77980 device tree.
Signed-off-by Sergei Shtylyov <[email protected]>---
This patch is against the 'renesas-devel-20180802v2-v4.18-rc7' branch of Simon Horman's 'renesas.git' repo.The R8A77980 CSI2/VIN DT binding updates have been posted earlier today...
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 374 ++++++++++++++++++++++++++++++ 1 file changed, 374 insertions(+)Index:
renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================arch/arm64/boot/dts/renesas/r8a77980.dtsi +0
-0
[...]
Quoted 42 lines
Quoted 42 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi +38
-0@@ -769,6 +1065,84 @@ resets = <&cpg 603>; }; + csi40: csi2 at feaa0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint at 0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint at 1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint at 2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint at 3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + }; + }; + };
Quoted 8 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi line 1110
Quoted 5 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi +5
-0+ + csi41: csi2 at feab0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;The use of
GIC_SPI246 for both csi40 and csi41 seems suspicious. Is this intentional?
No, must be copy/paste artefact... Sorry about that, it should be 241 instead.
Quoted 3 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi line 1111
Quoted 1 line
arch/arm64/boot/dts/renesas/r8a77980.dtsi +1
-0+ clocks = <&cpg CPG_MOD 716>;Should this clock be 715 rather than 716?
Yes, sure.
I'm seeing this patch merged despite your remarks. Please either fix it up or
pull it out!
[...]
MBR, Sergei
PATCH 1/1 arm64: dts: renesas: r8a77980: add CSI2/VIN support
Quoted 74 lines · Sergei Shtylyov
Quoted 18 lines · Simon Horman
Quoted 18 lines
Describe the CSI2 and VIN (and their interconnections) in the R8A77980 device tree.
Signed-off-by Sergei Shtylyov <[email protected]>---
This patch is against the 'renesas-devel-20180802v2-v4.18-rc7' branch of Simon Horman's 'renesas.git' repo.The R8A77980 CSI2/VIN DT binding updates have been posted earlier today...
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 374 ++++++++++++++++++++++++++++++ 1 file changed, 374 insertions(+)Index:
renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================arch/arm64/boot/dts/renesas/r8a77980.dtsi +0
-0[...]
Quoted 42 lines
Quoted 42 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi +38
-0@@ -769,6 +1065,84 @@ resets = <&cpg 603>; }; + csi40: csi2 at feaa0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint at 0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint at 1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint at 2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint at 3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + }; + }; + };Quoted 8 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi line 1110
Quoted 5 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi +5
-0+ + csi41: csi2 at feab0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;The use of
GIC_SPI246 for both csi40 and csi41 seems suspicious. Is this intentional?No, must be copy/paste artefact... Sorry about that, it should be 241 instead.
Quoted 8 lines
Quoted 3 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi line 1111
Quoted 1 line
arch/arm64/boot/dts/renesas/r8a77980.dtsi +1
-0+ clocks = <&cpg CPG_MOD 716>;Should this clock be 715 rather than 716?
Yes, sure.
I'm seeing this patch merged despite your remarks. Please either fix it up or
pull it out!
Oops, that was not intended.
I have fixed up the patch as you suggested.
The result is as follows:
Quoted 1 line
From
c703c196b847c654b392f027d3fa995e378792acMon Sep 17 00:00:00 2001
From: Sergei Shtylyov <[email protected]>
Date: Mon, 6 Aug 2018 22:55:00 +0300
Subject: [PATCH] arm64: dts: renesas: r8a77980: add CSI2/VIN support
Describe the CSI2 and VIN (and their interconnections) in the R8A77980 device tree.
--- arch/arm64/boot/dts/renesas/r8a77980.dtsi | 374 ++++++++++++++++++++++++++++++ 1 file changed, 374 insertions(+)
arch/arm64/boot/dts/renesas/r8a77980.dtsi +374 -0
@@ -579,6 +579,302 @@ status = "disabled"; }; + vin0: video at e6ef0000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin0>; + }; + }; + }; + }; + + vin1: video at e6ef1000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + status = "disabled"; + resets = <&cpg 810>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin1csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin1>; + }; + }; + }; + }; + + vin2: video at e6ef2000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin2>; + }; + }; + }; + }; + + vin3: video at e6ef3000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 808>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin3csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin3>; + }; + }; + }; + }; + + vin4: video at e6ef4000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 807>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin4>; + }; + }; + }; + }; + + vin5: video at e6ef5000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 806>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin5>; + }; + }; + }; + }; + + vin6: video at e6ef6000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 805>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin6csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin6>; + }; + }; + }; + }; + + vin7: video at e6ef7000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 804>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin7csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin7>; + }; + }; + }; + }; + + vin8: video at e6ef8000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef8000 0 0x1000>; + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + vin9: video at e6ef9000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef9000 0 0x1000>; + interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 627>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 627>; + status = "disabled"; + }; + + vin10: video at e6efa000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efa000 0 0x1000>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 625>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 625>; + status = "disabled"; + }; + + vin11: video at e6efb000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efb000 0 0x1000>; + interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 618>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 618>; + status = "disabled"; + }; + + vin12: video at e6efc000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efc000 0 0x1000>; + interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 612>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 612>; + status = "disabled"; + }; + + vin13: video at e6efd000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efd000 0 0x1000>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 608>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 608>; + status = "disabled"; + }; + + vin14: video at e6efe000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efe000 0 0x1000>; + interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 605>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 605>; + status = "disabled"; + }; + + vin15: video at e6eff000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6eff000 0 0x1000>; + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 604>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 604>; + status = "disabled"; + }; + dmac1: dma-controller at e7300000 { compatible = "renesas,dmac-r8a77980", "renesas,rcar-dmac";
@@ -769,6 +1065,84 @@ resets = <&cpg 603>; }; + csi40: csi2 at feaa0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint at 0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint at 1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint at 2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint at 3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + }; + }; + }; + + csi41: csi2 at feab0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi41vin4: endpoint at 0 { + reg = <0>; + remote-endpoint = <&vin4csi41>; + }; + csi41vin5: endpoint at 1 { + reg = <1>; + remote-endpoint = <&vin5csi41>; + }; + csi41vin6: endpoint at 2 { + reg = <2>; + remote-endpoint = <&vin6csi41>; + }; + csi41vin7: endpoint at 3 { + reg = <3>; + remote-endpoint = <&vin7csi41>; + }; + }; + }; + }; + du: display at feb00000 { compatible = "renesas,du-r8a77980", "renesas,du-r8a77970";
Signature · 1 line
2.11.0
PATCH 1/1 arm64: dts: renesas: r8a77980: add CSI2/VIN support
Quoted 18 lines · Simon Horman
Quoted 18 lines
Quoted 18 lines
Quoted 18 lines
Describe the CSI2 and VIN (and their interconnections) in the R8A77980 device tree.
Signed-off-by Sergei Shtylyov <[email protected]>---
This patch is against the 'renesas-devel-20180802v2-v4.18-rc7' branch of Simon Horman's 'renesas.git' repo.The R8A77980 CSI2/VIN DT binding updates have been posted earlier today...
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 374 ++++++++++++++++++++++++++++++ 1 file changed, 374 insertions(+)Index:
renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================arch/arm64/boot/dts/renesas/r8a77980.dtsi +0
-0
[...]
Quoted 16 lines
Quoted 16 lines
Quoted 7 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi
Quoted 4 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi +4
-0+ csi41: csi2 at feab0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;The use of
GIC_SPI246 for both csi40 and csi41 seems suspicious. Is this intentional?No, must be copy/paste artefact... Sorry about that, it should be 241 instead.
Quoted 3 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi line 1072
Quoted 1 line
arch/arm64/boot/dts/renesas/r8a77980.dtsi +1
-0+ clocks = <&cpg CPG_MOD 716>;Should this clock be 715 rather than 716?
Yes, sure.
Quoted 7 lines
Quoted 2 lines
I'm seeing this patch merged despite your remarks. Please either fix it up or
pull it out!Oops, that was not intended.
I have fixed up the patch as you suggested.
The result is as follows:
Still buggy... :-)
Quoted 18 lines
From
c703c196b847c654b392f027d3fa995e378792acMon Sep 17 00:00:00 2001
From: Sergei Shtylyov <[email protected]>
Date: Mon, 6 Aug 2018 22:55:00 +0300
Subject: [PATCH] arm64: dts: renesas: r8a77980: add CSI2/VIN supportDescribe the CSI2 and VIN (and their interconnections) in the R8A77980 device tree.
Signed-off-by Sergei Shtylyov <[email protected]>Signed-off-by Simon Horman <[email protected]>--- arch/arm64/boot/dts/renesas/r8a77980.dtsi | 374 ++++++++++++++++++++++++++++++ 1 file changed, 374 insertions(+)arch/arm64/boot/dts/renesas/r8a77980.dtsi +0
-0
[...]
Quoted 40 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi +36
-0@@ -769,6 +1065,84 @@ resets = <&cpg 603>; }; + csi40: csi2 at feaa0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint at 0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint at 1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint at 2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint at 3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + };
arch/arm64/boot/dts/renesas/r8a77980.dtsi line 1113
Quoted 10 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi +10
-0+ }; + }; + + csi41: csi2 at feab0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>;
You forgot to fix up this prop...
[...]
MBR, Sergei
PATCH 1/1 arm64: dts: renesas: r8a77980: add CSI2/VIN support
Quoted 110 lines · Sergei Shtylyov
Quoted 18 lines · Simon Horman
Quoted 18 lines
Quoted 18 lines
Quoted 18 lines
Describe the CSI2 and VIN (and their interconnections) in the R8A77980 device tree.
Signed-off-by Sergei Shtylyov <[email protected]>---
This patch is against the 'renesas-devel-20180802v2-v4.18-rc7' branch of Simon Horman's 'renesas.git' repo.The R8A77980 CSI2/VIN DT binding updates have been posted earlier today...
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 374 ++++++++++++++++++++++++++++++ 1 file changed, 374 insertions(+)Index:
renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================arch/arm64/boot/dts/renesas/r8a77980.dtsi +0
-0[...]
Quoted 16 lines
Quoted 16 lines
Quoted 7 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi
Quoted 4 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi +4
-0+ csi41: csi2 at feab0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;The use of
GIC_SPI246 for both csi40 and csi41 seems suspicious. Is this intentional?No, must be copy/paste artefact... Sorry about that, it should be 241 instead.
Quoted 3 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi
Quoted 1 line
arch/arm64/boot/dts/renesas/r8a77980.dtsi +1
-0+ clocks = <&cpg CPG_MOD 716>;Should this clock be 715 rather than 716?
Yes, sure.
Quoted 7 lines
Quoted 2 lines
I'm seeing this patch merged despite your remarks. Please either fix it up or
pull it out!Oops, that was not intended.
I have fixed up the patch as you suggested.
The result is as follows:Still buggy... :-)Quoted 18 lines
From
c703c196b847c654b392f027d3fa995e378792acMon Sep 17 00:00:00 2001
From: Sergei Shtylyov <[email protected]>
Date: Mon, 6 Aug 2018 22:55:00 +0300
Subject: [PATCH] arm64: dts: renesas: r8a77980: add CSI2/VIN supportDescribe the CSI2 and VIN (and their interconnections) in the R8A77980 device tree.
Signed-off-by Sergei Shtylyov <[email protected]>Signed-off-by Simon Horman <[email protected]>--- arch/arm64/boot/dts/renesas/r8a77980.dtsi | 374 ++++++++++++++++++++++++++++++ 1 file changed, 374 insertions(+)arch/arm64/boot/dts/renesas/r8a77980.dtsi +0
-0[...]
Quoted 44 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi +40
-0@@ -769,6 +1065,84 @@ resets = <&cpg 603>; }; + csi40: csi2 at feaa0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint at 0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint at 1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint at 2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint at 3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + }; + }; + }; + + csi41: csi2 at feab0000 {
Quoted 8 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi line 1113
Quoted 6 lines
arch/arm64/boot/dts/renesas/r8a77980.dtsi +6
-0+ compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>;You forgot to fix up this prop...
Thanks, I now have the following in my tree:
Quoted 1 line
From
f3e8d4c1e3c3a826310a220d7373ac7c076e7120Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <[email protected]>
Date: Mon, 6 Aug 2018 22:55:00 +0300
Subject: [PATCH] arm64: dts: renesas: r8a77980: add CSI2/VIN support
Describe the CSI2 and VIN (and their interconnections) in the R8A77980 device tree.
--- arch/arm64/boot/dts/renesas/r8a77980.dtsi | 374 ++++++++++++++++++++++++++++++ 1 file changed, 374 insertions(+)
arch/arm64/boot/dts/renesas/r8a77980.dtsi +374 -0
@@ -579,6 +579,302 @@ status = "disabled"; }; + vin0: video at e6ef0000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin0>; + }; + }; + }; + }; + + vin1: video at e6ef1000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + status = "disabled"; + resets = <&cpg 810>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin1csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin1>; + }; + }; + }; + }; + + vin2: video at e6ef2000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin2>; + }; + }; + }; + }; + + vin3: video at e6ef3000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 808>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin3csi40: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi40vin3>; + }; + }; + }; + }; + + vin4: video at e6ef4000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 807>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin4>; + }; + }; + }; + }; + + vin5: video at e6ef5000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 806>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin5>; + }; + }; + }; + }; + + vin6: video at e6ef6000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 805>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin6csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin6>; + }; + }; + }; + }; + + vin7: video at e6ef7000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 804>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin7csi41: endpoint at 2 { + reg = <2>; + remote-endpoint= <&csi41vin7>; + }; + }; + }; + }; + + vin8: video at e6ef8000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef8000 0 0x1000>; + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + vin9: video at e6ef9000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef9000 0 0x1000>; + interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 627>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 627>; + status = "disabled"; + }; + + vin10: video at e6efa000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efa000 0 0x1000>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 625>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 625>; + status = "disabled"; + }; + + vin11: video at e6efb000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efb000 0 0x1000>; + interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 618>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 618>; + status = "disabled"; + }; + + vin12: video at e6efc000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efc000 0 0x1000>; + interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 612>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 612>; + status = "disabled"; + }; + + vin13: video at e6efd000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efd000 0 0x1000>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 608>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 608>; + status = "disabled"; + }; + + vin14: video at e6efe000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efe000 0 0x1000>; + interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 605>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 605>; + status = "disabled"; + }; + + vin15: video at e6eff000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6eff000 0 0x1000>; + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 604>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 604>; + status = "disabled"; + }; + dmac1: dma-controller at e7300000 { compatible = "renesas,dmac-r8a77980", "renesas,rcar-dmac";
@@ -769,6 +1065,84 @@ resets = <&cpg 603>; }; + csi40: csi2 at feaa0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint at 0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint at 1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint at 2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint at 3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + }; + }; + }; + + csi41: csi2 at feab0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 715>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi41vin4: endpoint at 0 { + reg = <0>; + remote-endpoint = <&vin4csi41>; + }; + csi41vin5: endpoint at 1 { + reg = <1>; + remote-endpoint = <&vin5csi41>; + }; + csi41vin6: endpoint at 2 { + reg = <2>; + remote-endpoint = <&vin6csi41>; + }; + csi41vin7: endpoint at 3 { + reg = <3>; + remote-endpoint = <&vin7csi41>; + }; + }; + }; + }; + du: display at feb00000 { compatible = "renesas,du-r8a77980", "renesas,du-r8a77970";
Signature · 3 lines
2.11.0 ATCH] ?