Problem making buildroot

Buildroot vishnu87 2 participants 2 messages Oct 14, 2010 – Oct 15, 2010

Share & tools

vishnu87

author

2010-10-14 18:16 UTC #0 lore raw

Hi Jed ,
I am presently facing exactly the same problem , on a Debian system kernel 2.6.32....
It would be great if you have found the solution and could post it .. Thanks

Vishnu

Quoted 264 lines · jdzielski

Sorry if this is a multiple post. It's showing up in the list that I see but there is an indication that he message hasn't been accepted.
Hi,
I'm new at trying to do things at this level, but I'm trying to make
the buildroot on Ubuntu 8.04. I've been following the instructions at
http://docwiki.gumstix.org/index.php/Buildroot which is pretty straight forward. There were a couple errors that I managed to fix, but I've reached a point where I'm not sure what the make file is trying to do. The command that is being executed by the main make is:
make -j3 -C /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build all
THE OUTPUT OF THE COMMAND IS:
make[1]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build' make[2]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build' make[2]: Nothing to be done for `all-target'.
make[3]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/intl' make[3]: Nothing to be done for all'.
make[3]: Leaving directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/intl' make[3]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty' make[4]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty/testsuite' make[4]: Nothing to be done for all'.
make[4]: Leaving directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty/testsuite' make[3]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc' for f in standards.info configure.info; do \
if test -f
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/etc/echo $f | sed -e 's/.info$/.texi/'; then \
if make
"MAKEINFO=/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing
makeinfo --split-size=5000000 --split-size=5000000" $f; then \
	      true; \
	    else \
	      exit 1; \
	    fi; \
	  fi; \
	done
make[3]: Leaving directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty' make[4]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc' make[4]: `standards.info' is up to date.
make[4]: Leaving directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc' mkdir -p -- ./ld
Configuring in ./ld
make[4]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc' make[4]: configure.info' is up to date.
make[4]: Leaving directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc' make[3]: Leaving directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc' make[3]: Entering directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd' Making info in doc
make[4]: Entering directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/doc'
restore=: && backupdir=".am$$" && \
	am__cwd=`pwd` && cd
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc
&& \
	rm -rf $backupdir && mkdir $backupdir && \
	if
(/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing makeinfo --split-size=5000000 --split-size=5000000 --version) >/dev/null
2>&1; then \
for f in
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info-[0-9] /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info-[0-9][0-9] /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.i[0-9] /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.i[0-9][0-9];
do \
	    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	cd "$am__cwd"; \
	if
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing
makeinfo --split-size=5000000 --split-size=5000000   -I
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc
\
	 -o
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.texinfo;
\
	then \
	  rc=0; \
	  cd
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc;
\
	else \
	  rc=$?; \
	  cd
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc && \
$restore $backupdir/* `echo
".//home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info"
| sed 's|[^/]*$||'`; \
	fi; \
	rm -rf $backupdir; exit $rc
WARNING: `makeinfo' is missing on your system. You should only need it if
you modified a .texi' or .texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy `make' (AIX,
DU, IRIX). You might want to install the `Texinfo' package or
the `GNU make' package. Grab either from any GNU archive site.
make[4]: *** [/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info] Error 1
make[4]: Leaving directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/doc' Making info in po
make[4]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/po' make[4]: Nothing to be done for info'.
make[4]: Leaving directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/po' make[4]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd' make[4]: Nothing to be done for `info-am'.
make[4]: Leaving directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd' make[3]: *** [info-recursive] Error 1
make[3]: Leaving directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd' make[2]: *** [all-bfd] Error 2
make[2]: *** Waiting for unfinished jobs....
configure: creating cache ./config.cache
checking build system type... i386-pc-linux-gnu
checking host system type... i386-pc-linux-gnu
checking target system type... arm-unknown-linux-uclibcgnueabi
checking for i386-pc-linux-gnu-gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for library containing strerror... none required
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for ld used by GCC... ld
checking if the linker (ld) is GNU ld... yes
checking for ld option to reload object files... -r
checking for BSD-compatible nm... nm
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking the maximum length of command line arguments... none
checking for i386-pc-linux-gnu-ranlib... ranlib
checking for i386-pc-linux-gnu-strip... no
checking for strip... strip
updating cache ./config.cache
loading cache ./config.cache within ltconfig
checking whether -lc should be explicitly linked in... no
checking for objdir... .libs
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
finding the maximum length of command line arguments... 49153
checking if gcc supports -c -o file.o... yes
checking if gcc supports -fno-rtti -fno-exceptions ... no
checking whether the linker (ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking command to parse nm output... ok
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
creating libtool
updating cache ./config.cache
configure: loading cache ./config.cache
Setting warning flags = -W -Wall -Wstrict-prototypes -Wmissing-prototypes
checking for i386-pc-linux-gnu-gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking for a BSD-compatible install... /usr/bin/install -c
checking whether NLS is requested... no
checking whether NLS is requested... no
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for bison... bison -y
checking for flex... flex
checking for yywrap in -lfl... yes
checking lex output file root... lex.yy
checking whether yytext is a pointer... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking elf-hints.h usability... no
checking elf-hints.h presence... no
checking for elf-hints.h... no
checking for sbrk... yes
checking for realpath... yes
checking for glob... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for a known getopt prototype in unistd.h... yes
checking whether strstr is declared... yes
checking whether free is declared... yes
checking whether sbrk is declared... yes
checking whether getenv is declared... yes
checking whether environ is declared... no
checking whether ANSI C string concatenation works... yes
updating cache ./config.cache
configure: creating ./config.status
config.status: creating Makefile
config.status: creating po/Makefile.in
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing default-1 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
make[2]: Leaving directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build' make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build'
make: *** [/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/binutils/objdump] Error 2
Thanks for any help that you can provide.

Signature · 2 lines

View this message in context: http://old.nabble.com/Problem-making-buildroot-tp24075410p29964713.html
Sent from the BuildRoot mailing list archive at Nabble.com.

Lionel Landwerlin

2010-10-15 00:20 UTC #1 lore raw

The customized buildroot version you're pointing out is more than a year old. I don't think you're going to find a lot of support here.

You better try to shake up gumstix ;)

Otherwise you can find the official stable version here :

http://buildroot.uclibc.org/download.html

or the development version on git :

http://buildroot.uclibc.org/git.html

Regards,

--
Lionel Landwerlin

Le jeudi 14 octobre 2010 ? 11:16 -0700, vishnu87 a ?crit :

Quoted 276 lines

Hi Jed ,
I am presently facing exactly the same problem , on a Debian system kernel 2.6.32....
It would be great if you have found the solution and could post it .. Thanks
Vishnu
Quoted 264 lines · jdzielski
Sorry if this is a multiple post. It's showing up in the list that I see but there is an indication that he message hasn't been accepted.
Hi,
I'm new at trying to do things at this level, but I'm trying to make
the buildroot on Ubuntu 8.04. I've been following the instructions at
http://docwiki.gumstix.org/index.php/Buildroot which is pretty straight forward. There were a couple errors that I managed to fix, but I've reached a point where I'm not sure what the make file is trying to do. The command that is being executed by the main make is:
make -j3 -C /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build all
THE OUTPUT OF THE COMMAND IS:
make[1]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build' make[2]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build' make[2]: Nothing to be done for `all-target'.
make[3]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/intl' make[3]: Nothing to be done for all'.
make[3]: Leaving directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/intl' make[3]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty' make[4]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty/testsuite' make[4]: Nothing to be done for all'.
make[4]: Leaving directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty/testsuite' make[3]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc' for f in standards.info configure.info; do \
if test -f
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/etc/echo $f | sed -e 's/.info$/.texi/'; then \
if make
"MAKEINFO=/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing
makeinfo --split-size=5000000 --split-size=5000000" $f; then \
	      true; \
	    else \
	      exit 1; \
	    fi; \
	  fi; \
	done
make[3]: Leaving directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty' make[4]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc' make[4]: `standards.info' is up to date.
make[4]: Leaving directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc' mkdir -p -- ./ld
Configuring in ./ld
make[4]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc' make[4]: configure.info' is up to date.
make[4]: Leaving directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc' make[3]: Leaving directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc' make[3]: Entering directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd' Making info in doc
make[4]: Entering directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/doc'
restore=: && backupdir=".am$$" && \
	am__cwd=`pwd` && cd
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc
&& \
	rm -rf $backupdir && mkdir $backupdir && \
	if
(/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing makeinfo --split-size=5000000 --split-size=5000000 --version) >/dev/null
2>&1; then \
for f in
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info-[0-9] /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info-[0-9][0-9] /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.i[0-9] /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.i[0-9][0-9];
do \
	    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	cd "$am__cwd"; \
	if
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing
makeinfo --split-size=5000000 --split-size=5000000   -I
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc
\
	 -o
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.texinfo;
\
	then \
	  rc=0; \
	  cd
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc;
\
	else \
	  rc=$?; \
	  cd
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc && \
$restore $backupdir/* `echo
".//home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info"
| sed 's|[^/]*$||'`; \
	fi; \
	rm -rf $backupdir; exit $rc
WARNING: `makeinfo' is missing on your system. You should only need it if
you modified a .texi' or .texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy `make' (AIX,
DU, IRIX). You might want to install the `Texinfo' package or
the `GNU make' package. Grab either from any GNU archive site.
make[4]: *** [/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info] Error 1
make[4]: Leaving directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/doc' Making info in po
make[4]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/po' make[4]: Nothing to be done for info'.
make[4]: Leaving directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/po' make[4]: Entering directory /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd' make[4]: Nothing to be done for `info-am'.
make[4]: Leaving directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd' make[3]: *** [info-recursive] Error 1
make[3]: Leaving directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd' make[2]: *** [all-bfd] Error 2
make[2]: *** Waiting for unfinished jobs....
configure: creating cache ./config.cache
checking build system type... i386-pc-linux-gnu
checking host system type... i386-pc-linux-gnu
checking target system type... arm-unknown-linux-uclibcgnueabi
checking for i386-pc-linux-gnu-gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for library containing strerror... none required
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for ld used by GCC... ld
checking if the linker (ld) is GNU ld... yes
checking for ld option to reload object files... -r
checking for BSD-compatible nm... nm
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking the maximum length of command line arguments... none
checking for i386-pc-linux-gnu-ranlib... ranlib
checking for i386-pc-linux-gnu-strip... no
checking for strip... strip
updating cache ./config.cache
loading cache ./config.cache within ltconfig
checking whether -lc should be explicitly linked in... no
checking for objdir... .libs
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
finding the maximum length of command line arguments... 49153
checking if gcc supports -c -o file.o... yes
checking if gcc supports -fno-rtti -fno-exceptions ... no
checking whether the linker (ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking command to parse nm output... ok
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
creating libtool
updating cache ./config.cache
configure: loading cache ./config.cache
Setting warning flags = -W -Wall -Wstrict-prototypes -Wmissing-prototypes
checking for i386-pc-linux-gnu-gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking for a BSD-compatible install... /usr/bin/install -c
checking whether NLS is requested... no
checking whether NLS is requested... no
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for bison... bison -y
checking for flex... flex
checking for yywrap in -lfl... yes
checking lex output file root... lex.yy
checking whether yytext is a pointer... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking elf-hints.h usability... no
checking elf-hints.h presence... no
checking for elf-hints.h... no
checking for sbrk... yes
checking for realpath... yes
checking for glob... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for a known getopt prototype in unistd.h... yes
checking whether strstr is declared... yes
checking whether free is declared... yes
checking whether sbrk is declared... yes
checking whether getenv is declared... yes
checking whether environ is declared... no
checking whether ANSI C string concatenation works... yes
updating cache ./config.cache
configure: creating ./config.status
config.status: creating Makefile
config.status: creating po/Makefile.in
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing default-1 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
make[2]: Leaving directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build' make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build'
make: *** [/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/binutils/objdump] Error 2
Thanks for any help that you can provide.