Skip to contentSkip to conversation

Error during NAND access

U-Boot alex889 1 participant 1 message Oct 19, 2010

lore
Share & tools
lore

alex889

author
#0 lore raw

Hi,
I have strange phenomena.
I have DM365 baaed board.
In some boards (Not all of them), I get this strange case:
Accessing the NAND (Erase/write), like with saveenv command, followed by Ethernet access (TFTP/PING) stuck the SW.
Accessing the NAND without prior access to ETHERNET works fine. I tried to debug this with TI code composer studio.
When accessing the NAND, it seems that the CPUs data bus is hung, and I get the following message from code composer:

Warning:

0x40000020/-1032 @ marker 1022
Warning during: Execution,

The pipeline is stalled owing to 'data bus not ready'
Did you ever encounter such a problem?
Do you know if it is caused by HW problem (Corrupt NAND/DM365), or a fixable SW bug?

Thanks in advance
Alex

Signature · 2 lines
View this message in context: http://old.nabble.com/Error-during-NAND-access-tp29999994p29999994.html
Sent from the Uboot - Users mailing list archive at Nabble.com.