ASoC: rt5645: Add jack detection workaround for MINIX Z83-4 based devices
Subsystems (3)
PATCH v2 1/1 ASoC: rt5645: Add jack detection workaround for MINIX Z83-4 based devices
The MINIX NEO Z83-4 and MINIX NEO Z83-4 Pro devices requires jd_mode=3 to make the jack detection work. Using a BIOS DMI product of "Z83-4" will match both devices of 'NEO Z83-4' and 'Z83-4 Pro'.
---
v2: Applied and tested again sound -b for-next and linux-next -b master
v1: Applied and tested again linux -b master
--- sound/soc/codecs/rt5645.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
sound/soc/codecs/rt5645.c +17 -0
@@ -3655,6 +3655,21 @@ static int rt5645_resume(struct snd_soc_codec *codec) { } }; +static struct rt5645_platform_data minix_z83_4_platform_data = { + .jd_mode =3 , +}; + +static struct dmi_system_id dmi_platform_minix_z83_4[] = { + { + .ident ="MINIX Z83-4" , + .matches = { +DMI_EXACT_MATCH (DMI_SYS_VENDOR ,"MINIX" ), +DMI_MATCH (DMI_PRODUCT_NAME ,"Z83-4" ), + }, + }, + { } +}; +static bool rt5645_check_dp (struct device *dev) { if (device_property_present(dev, "realtek,in2-differential") ||
@@ -3709,6 +3724,8 @@ static int rt5645_i2c_probe(struct i2c_client *i2c, rt5645->pdata = gpd_win_platform_data; else if (dmi_check_system(dmi_platform_asus_t100ha)) rt5645->pdata = general_platform_data2; + else if (dmi_check_system(dmi_platform_minix_z83_4)) + rt5645->pdata = minix_z83_4_platform_data;if (quirk !=-1 ) { rt5645->pdata.in2_diff =QUIRK_IN2_DIFF (quirk);
Signature · 1 line
1.9.1
Mark Brown
maintainerQuoted 1 line · Ian W MORRISON
v2: Applied and tested again sound -b for-next and linux-next -b master
You're submitting this to me, it needs to apply to *my* tree:
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
Quoted 7 lines · Mark Brown
Quoted 1 line · Ian W MORRISON
v2: Applied and tested again sound -b for-next and linux-next -b master
You're submitting this to me, it needs to apply to *my* tree:
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
Yes, v2 is now applied and tested against yourgit://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git using branch for-next. Is that correct or should I use a different branch?
Mark Brown
maintainerQuoted 5 lines · Ian W MORRISON
Quoted 3 lines · Mark Brown
Quoted 1 line · Ian W MORRISON
v2: Applied and tested again sound -b for-next and linux-next -b master
Quoted 7 lines
Quoted 3 lines
You're submitting this to me, it needs to apply to *my* tree:
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.gitYes, v2 is now applied and tested against your
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.gitusing branch for-next. Is that correct or should I use a different branch?
Are you sure you're up to date there? It didn't apply against either the rt5645 branch or my for-next branch, I applied a few Realtek patches earlier today.