drm/msm/dsi: fix error checks and return values for DSI xmit functions
PATCH 1/1 drm/msm/dsi: fix error checks and return values for DSI xmit functions
As noticed by Dan ([1] an the followup thread) there are multiple issues with the return values for MSM DSI command transmission callback. In the error case it can easily return a positive value when it should have returned a proper error code.
This commits attempts to fix these issues both in TX and in RX paths.
[1]: https://lore.kernel.org/linux-arm-msm/20211001123617.GH2283@kili/
--- drivers/gpu/drm/msm/dsi/dsi_host.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
drivers/gpu/drm/msm/dsi/dsi_host.c +14 -7
@@ -1341,10 +1341,10 @@ static int dsi_cmds2buf_tx(struct msm_dsi_host *msm_host,dsi_get_bpp (msm_host->format) /8 ; len =dsi_cmd_dma_add (msm_host, msg); -if (!len) { +if (len <0 ) {pr_err ("%s: failed to add cmd type = 0x%x\n" , __func__, msg->type); -return -EINVAL ; +return len; }/* for video mode, do not send cmds more than
@@ -1363,10 +1363,14 @@ static int dsi_cmds2buf_tx(struct msm_dsi_host *msm_host, } ret =dsi_cmd_dma_tx (msm_host, len); -if (ret < len) { -pr_err ("%s: cmd dma tx failed, type=0x%x, data0=0x%x, len=%d\n" , - __func__, msg->type, (*(u8 *)(msg->tx_buf)), len); -return -ECOMM ; +if (ret <0 ) { +pr_err ("%s: cmd dma tx failed, type=0x%x, data0=0x%x, len=%d, ret=%d\n" , + __func__, msg->type, (*(u8 *)(msg->tx_buf)), len, ret); +return ret; + }else if (ret < len) { +pr_err ("%s: cmd dma tx failed, type=0x%x, data0=0x%x, ret=%d len=%d\n" , + __func__, msg->type, (*(u8 *)(msg->tx_buf)), ret, len); +return -EIO ; }return len;
@@ -2092,9 +2096,12 @@ int msm_dsi_host_cmd_rx(struct mipi_dsi_host *host, } ret =dsi_cmds2buf_tx (msm_host, msg); -if (ret < msg->tx_len) { +if (ret <0 ) {pr_err ("%s: Read cmd Tx failed, %d\n" , __func__, ret);return ret; + }else if (ret < msg->tx_len) { +pr_err ("%s: Read cmd Tx failed, too short: %d\n" , __func__, ret); +return -ECOMM ; }/*
Signature · 1 line
2.35.1
Quoted 5 lines · Dmitry Baryshkov
As noticed by Dan ([1] an the followup thread) there are multiple issues with the return values for MSM DSI command transmission callback. In the error case it can easily return a positive value when it should have returned a proper error code.
Quoted 7 lines
This commits attempts to fix these issues both in TX and in RX paths.
[1]: https://lore.kernel.org/linux-arm-msm/20211001123617.GH2283@kili/
Fixes a689554ba6ed ("drm/msm: Initial add DSI connector support")Reported-by Dan Carpenter <[email protected]>Signed-off-by Dmitry Baryshkov <[email protected]>
Looks reasonable to me,
Quoted 54 lines
--- drivers/gpu/drm/msm/dsi/dsi_host.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)drivers/gpu/drm/msm/dsi/dsi_host.c +14
-7@@ -1341,10 +1341,10 @@ static int dsi_cmds2buf_tx(struct msm_dsi_host *msm_host,dsi_get_bpp (msm_host->format) /8 ; len =dsi_cmd_dma_add (msm_host, msg); -if (!len) { +if (len <0 ) {pr_err ("%s: failed to add cmd type = 0x%x\n" , __func__, msg->type); -return -EINVAL ; +return len; }/* for video mode, do not send cmds more than @@ -1363,10 +1363,14 @@ static int dsi_cmds2buf_tx(struct msm_dsi_host *msm_host, } ret =dsi_cmd_dma_tx (msm_host, len); -if (ret < len) { -pr_err ("%s: cmd dma tx failed, type=0x%x, data0=0x%x, len=%d\n" , - __func__, msg->type, (*(u8 *)(msg->tx_buf)), len); -return -ECOMM ; +if (ret <0 ) { +pr_err ("%s: cmd dma tx failed, type=0x%x, data0=0x%x, len=%d, ret=%d\n" , + __func__, msg->type, (*(u8 *)(msg->tx_buf)), len, ret); +return ret; + }else if (ret < len) { +pr_err ("%s: cmd dma tx failed, type=0x%x, data0=0x%x, ret=%d len=%d\n" , + __func__, msg->type, (*(u8 *)(msg->tx_buf)), ret, len); +return -EIO ; }return len;@@ -2092,9 +2096,12 @@ int msm_dsi_host_cmd_rx(struct mipi_dsi_host *host, } ret =dsi_cmds2buf_tx (msm_host, msg); -if (ret < msg->tx_len) { +if (ret <0 ) {pr_err ("%s: Read cmd Tx failed, %d\n" , __func__, ret);return ret; + }else if (ret < msg->tx_len) { +pr_err ("%s: Read cmd Tx failed, too short: %d\n" , __func__, ret); +return -ECOMM ; }/*
Hi Dmitry,
Quoted 5 lines · Dmitry Baryshkov
As noticed by Dan ([1] an the followup thread) there are multiple issues with the return values for MSM DSI command transmission callback. In the error case it can easily return a positive value when it should have returned a proper error code.
Quoted 8 lines
This commits attempts to fix these issues both in TX and in RX paths.
[1]: https://lore.kernel.org/linux-arm-msm/20211001123617.GH2283@kili/
Fixes a689554ba6ed ("drm/msm: Initial add DSI connector support")Reported-by Dan Carpenter <[email protected]>Signed-off-by Dmitry Baryshkov <[email protected]>Reviewed-by Abhinav Kumar <[email protected]>
Thank you for your patience waiting for the requested tests; this patch seems to have no adverse effect on our cmdmode panels.
On the following devices:
- Sony Xperia X (Loire Suzu, MSM8976), on Linux 5.17;
- Sony Xperia 10 II (Seine PDX201, SM6125), on -next 20220318;
- Sony Xperia XA2 Ultra (Nile Discovery, SDM630), on Linux 5.16.
Apologies for the older kernel versions, that's what happens when having too many patches to dig through and too little hobby time to send them. Let me know if there's a patch dependency that you like to be included.
- Marijn
Quoted 54 lines
--- drivers/gpu/drm/msm/dsi/dsi_host.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)drivers/gpu/drm/msm/dsi/dsi_host.c +14
-7@@ -1341,10 +1341,10 @@ static int dsi_cmds2buf_tx(struct msm_dsi_host *msm_host,dsi_get_bpp (msm_host->format) /8 ; len =dsi_cmd_dma_add (msm_host, msg); -if (!len) { +if (len <0 ) {pr_err ("%s: failed to add cmd type = 0x%x\n" , __func__, msg->type); -return -EINVAL ; +return len; }/* for video mode, do not send cmds more than @@ -1363,10 +1363,14 @@ static int dsi_cmds2buf_tx(struct msm_dsi_host *msm_host, } ret =dsi_cmd_dma_tx (msm_host, len); -if (ret < len) { -pr_err ("%s: cmd dma tx failed, type=0x%x, data0=0x%x, len=%d\n" , - __func__, msg->type, (*(u8 *)(msg->tx_buf)), len); -return -ECOMM ; +if (ret <0 ) { +pr_err ("%s: cmd dma tx failed, type=0x%x, data0=0x%x, len=%d, ret=%d\n" , + __func__, msg->type, (*(u8 *)(msg->tx_buf)), len, ret); +return ret; + }else if (ret < len) { +pr_err ("%s: cmd dma tx failed, type=0x%x, data0=0x%x, ret=%d len=%d\n" , + __func__, msg->type, (*(u8 *)(msg->tx_buf)), ret, len); +return -EIO ; }return len;@@ -2092,9 +2096,12 @@ int msm_dsi_host_cmd_rx(struct mipi_dsi_host *host, } ret =dsi_cmds2buf_tx (msm_host, msg); -if (ret < msg->tx_len) { +if (ret <0 ) {pr_err ("%s: Read cmd Tx failed, %d\n" , __func__, ret);return ret; + }else if (ret < msg->tx_len) { +pr_err ("%s: Read cmd Tx failed, too short: %d\n" , __func__, ret); +return -ECOMM ; }/*
Quoted 23 lines · Marijn Suijten
Hi Dmitry,
Quoted 5 lines · Dmitry Baryshkov
As noticed by Dan ([1] an the followup thread) there are multiple issues with the return values for MSM DSI command transmission callback. In the error case it can easily return a positive value when it should have returned a proper error code.
Quoted 8 lines
This commits attempts to fix these issues both in TX and in RX paths.
[1]: https://lore.kernel.org/linux-arm-msm/20211001123617.GH2283@kili/
Fixes a689554ba6ed ("drm/msm: Initial add DSI connector support")Reported-by Dan Carpenter <[email protected]>Signed-off-by Dmitry Baryshkov <[email protected]>Reviewed-by Abhinav Kumar <[email protected]>Thank you for your patience waiting for the requested tests; this patch seems to have no adverse effect on our cmdmode panels.
Tested-by Marijn Suijten <[email protected]>
Quoted 8 lines
On the following devices:
- Sony Xperia X (Loire Suzu, MSM8976), on Linux 5.17;
- Sony Xperia 10 II (Seine PDX201, SM6125), on -next 20220318;
- Sony Xperia XA2 Ultra (Nile Discovery, SDM630), on Linux 5.16.Apologies for the older kernel versions, that's what happens when having too many patches to dig through and too little hobby time to send them. Let me know if there's a patch dependency that you like to be included.
Thank you for the confirmation! No, no hidden dependencies.
Quoted 57 lines
- Marijn
Quoted 54 lines
--- drivers/gpu/drm/msm/dsi/dsi_host.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)drivers/gpu/drm/msm/dsi/dsi_host.c +14
-7@@ -1341,10 +1341,10 @@ static int dsi_cmds2buf_tx(struct msm_dsi_host *msm_host,dsi_get_bpp (msm_host->format) /8 ; len =dsi_cmd_dma_add (msm_host, msg); -if (!len) { +if (len <0 ) {pr_err ("%s: failed to add cmd type = 0x%x\n" , __func__, msg->type); -return -EINVAL ; +return len; }/* for video mode, do not send cmds more than @@ -1363,10 +1363,14 @@ static int dsi_cmds2buf_tx(struct msm_dsi_host *msm_host, } ret =dsi_cmd_dma_tx (msm_host, len); -if (ret < len) { -pr_err ("%s: cmd dma tx failed, type=0x%x, data0=0x%x, len=%d\n" , - __func__, msg->type, (*(u8 *)(msg->tx_buf)), len); -return -ECOMM ; +if (ret <0 ) { +pr_err ("%s: cmd dma tx failed, type=0x%x, data0=0x%x, len=%d, ret=%d\n" , + __func__, msg->type, (*(u8 *)(msg->tx_buf)), len, ret); +return ret; + }else if (ret < len) { +pr_err ("%s: cmd dma tx failed, type=0x%x, data0=0x%x, ret=%d len=%d\n" , + __func__, msg->type, (*(u8 *)(msg->tx_buf)), ret, len); +return -EIO ; }return len;@@ -2092,9 +2096,12 @@ int msm_dsi_host_cmd_rx(struct mipi_dsi_host *host, } ret =dsi_cmds2buf_tx (msm_host, msg); -if (ret < msg->tx_len) { +if (ret <0 ) {pr_err ("%s: Read cmd Tx failed, %d\n" , __func__, ret);return ret; + }else if (ret < msg->tx_len) { +pr_err ("%s: Read cmd Tx failed, too short: %d\n" , __func__, ret); +return -ECOMM ; }/*
Signature · 2 lines
With best wishes Dmitry