Skip to contentSkip to conversation

Add Alder Lake PCH-S support to PMC core driver

PATCH Superseded Gayatri Kammela 3 participants 11 messages Jul 16, 2021 – Aug 16, 2021

Subsystems (2)

v5 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

v5 cover Add Alder Lake PCH-S support to PMC core driver

Hi,
The patch series move intel_pmc_core* files to pmc subfolder as well as add Alder Lake PCH-S support to PMC core driver.

Patch 1: Move intel_pmc_core* files to pmc subfolder Patch 2: Add Alderlake support to pmc core driver
Patch 3: Add Latency Tolerance Reporting (LTR) support to Alder Lake Patch 4: Add Alder Lake low power mode support for pmc core Patch 5: Add GBE Package C10 fix for Alder Lake

Changes since v1:
1) Add patch 1 to v2 i.e., Move intel_pmc_core* files to pmc subfolder.
2) Modify commit message for patch 2.

Changes since v2:
1) Dropped intel_pmc_ prefix from the file names.

Changes since v3:
1) Fixed an error reported by lkp.

Changes since v4:
1) Updated MAINTAINERS

David E. Box (1):
platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake
PCH

Gayatri Kammela (4):
platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc
subfolder
platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR)
support to Alder Lake
platform/x86/intel: pmc/core: Add Alder Lake low power mode support
for pmc core

 MAINTAINERS                                   |   2 +-
 drivers/platform/x86/Kconfig                  |  21 --
 drivers/platform/x86/Makefile                 |   1 -
 drivers/platform/x86/intel/Kconfig            |   1 +
 drivers/platform/x86/intel/Makefile           |   1 +
 drivers/platform/x86/intel/pmc/Kconfig        |  22 ++
 drivers/platform/x86/intel/pmc/Makefile       |   5 +
 .../{intel_pmc_core.c => intel/pmc/core.c}    | 309 +++++++++++++++++-
 .../{intel_pmc_core.h => intel/pmc/core.h}    |  17 +
 .../pmc/pltdrv.c}                             |   0
 10 files changed, 352 insertions(+), 27 deletions(-)
 create mode 100644 drivers/platform/x86/intel/pmc/Kconfig
 create mode 100644 drivers/platform/x86/intel/pmc/Makefile
 rename drivers/platform/x86/{intel_pmc_core.c => intel/pmc/core.c} (85%)
 rename drivers/platform/x86/{intel_pmc_core.h => intel/pmc/core.h} (95%)
 rename drivers/platform/x86/{intel_pmc_core_pltdrv.c => intel/pmc/pltdrv.c} (100%)
Cc Srinivas Pandruvada <[email protected]>
Cc Andy Shevchenko <[email protected]>
Cc David Box <[email protected]>
Cc You-Sheng Yang <[email protected]>
Cc Hans de Goede <[email protected]>
Cc Rajneesh Bhardwaj <[email protected]>

base-commit: d936eb23874433caa3e3d841cfa16f5434b85dcf

Signature · 1 line
2.25.1
#1 lore raw

PATCH v5 1/5 platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder

As part of collecting Intel x86 specific drivers in their own folder, move intel_pmc_core* files to its own subfolder there.

---
 MAINTAINERS                                   |  2 +-
 drivers/platform/x86/Kconfig                  | 21 ------------------
 drivers/platform/x86/Makefile                 |  1 -
 drivers/platform/x86/intel/Kconfig            |  1 +
 drivers/platform/x86/intel/Makefile           |  1 +
 drivers/platform/x86/intel/pmc/Kconfig        | 22 +++++++++++++++++++
 drivers/platform/x86/intel/pmc/Makefile       |  5 +++++
 .../{intel_pmc_core.c => intel/pmc/core.c}    |  2 +-
 .../{intel_pmc_core.h => intel/pmc/core.h}    |  0
 .../pmc/pltdrv.c}                             |  0
 10 files changed, 31 insertions(+), 24 deletions(-)
 create mode 100644 drivers/platform/x86/intel/pmc/Kconfig
 create mode 100644 drivers/platform/x86/intel/pmc/Makefile
 rename drivers/platform/x86/{intel_pmc_core.c => intel/pmc/core.c} (99%)
 rename drivers/platform/x86/{intel_pmc_core.h => intel/pmc/core.h} (100%)
 rename drivers/platform/x86/{intel_pmc_core_pltdrv.c => intel/pmc/pltdrv.c} (100%)
MAINTAINERS +1 -1
index 6c8be735cc91..c5d610885bf2 100644
@@ -9477,7 +9477,7 @@ M:	David E Box <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-platform-intel-pmc
-F:	drivers/platform/x86/intel_pmc_core*
+F:	drivers/platform/x86/intel/pmc/core*
 
 INTEL PMIC GPIO DRIVERS
 M:	Andy Shevchenko <[email protected]>
drivers/platform/x86/Kconfig +0 -21
index 7d385c3b2239..cae72922f448 100644
@@ -1184,27 +1184,6 @@ config INTEL_MRFLD_PWRBTN
 	  To compile this driver as a module, choose M here: the module
 	  will be called intel_mrfld_pwrbtn.
 
-config INTEL_PMC_CORE
-	tristate "Intel PMC Core driver"
-	depends on PCI
-	depends on ACPI
-	help
-	  The Intel Platform Controller Hub for Intel Core SoCs provides access
-	  to Power Management Controller registers via various interfaces. This
-	  driver can utilize debugging capabilities and supported features as
-	  exposed by the Power Management Controller. It also may perform some
-	  tasks in the PMC in order to enable transition into the SLPS0 state.
-	  It should be selected on all Intel platforms supported by the driver.
-
-	  Supported features:
-		- SLP_S0_RESIDENCY counter
-		- PCH IP Power Gating status
-		- LTR Ignore / LTR Show
-		- MPHY/PLL gating status (Sunrisepoint PCH only)
-		- SLPS0 Debug registers (Cannonlake/Icelake PCH)
-		- Low Power Mode registers (Tigerlake and beyond)
-		- PMC quirks as needed to enable SLPS0/S0ix
-
 config INTEL_PMT_CLASS
 	tristate
 	help
drivers/platform/x86/Makefile +0 -1
index 7ee369aab10d..43d36f8c36f1 100644
@@ -128,7 +128,6 @@ obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)		+= intel-uncore-frequency.o
 obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU)	+= intel_bxtwc_tmu.o
 obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN)	+= intel_chtdc_ti_pwrbtn.o
 obj-$(CONFIG_INTEL_MRFLD_PWRBTN)	+= intel_mrfld_pwrbtn.o
-obj-$(CONFIG_INTEL_PMC_CORE)		+= intel_pmc_core.o intel_pmc_core_pltdrv.o
 obj-$(CONFIG_INTEL_PMT_CLASS)		+= intel_pmt_class.o
 obj-$(CONFIG_INTEL_PMT_TELEMETRY)	+= intel_pmt_telemetry.o
 obj-$(CONFIG_INTEL_PMT_CRASHLOG)	+= intel_pmt_crashlog.o
drivers/platform/x86/intel/Kconfig +1 -0
index f2eef337eb98..8ca021785f67 100644
@@ -18,5 +18,6 @@ if X86_PLATFORM_DRIVERS_INTEL
 
 source "drivers/platform/x86/intel/int33fe/Kconfig"
 source "drivers/platform/x86/intel/int3472/Kconfig"
+source "drivers/platform/x86/intel/pmc/Kconfig"
 
 endif # X86_PLATFORM_DRIVERS_INTEL
drivers/platform/x86/intel/Makefile +1 -0
index 0653055942d5..49962f4dfdec 100644
@@ -6,3 +6,4 @@
 
 obj-$(CONFIG_INTEL_CHT_INT33FE)		+= int33fe/
 obj-$(CONFIG_INTEL_SKL_INT3472)		+= int3472/
+obj-$(CONFIG_INTEL_PMC_CORE)		+= pmc/
drivers/platform/x86/intel/pmc/Kconfig new file +22 -0
new file mode 100644
index 000000000000..b4c955a35674
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config INTEL_PMC_CORE
+	tristate "Intel PMC Core driver"
+	depends on PCI
+	depends on ACPI
+	help
+	  The Intel Platform Controller Hub for Intel Core SoCs provides access
+	  to Power Management Controller registers via various interfaces. This
+	  driver can utilize debugging capabilities and supported features as
+	  exposed by the Power Management Controller. It also may perform some
+	  tasks in the PMC in order to enable transition into the SLPS0 state.
+	  It should be selected on all Intel platforms supported by the driver.
+
+	  Supported features:
+		- SLP_S0_RESIDENCY counter
+		- PCH IP Power Gating status
+		- LTR Ignore / LTR Show
+		- MPHY/PLL gating status (Sunrisepoint PCH only)
+		- SLPS0 Debug registers (Cannonlake/Icelake PCH)
+		- Low Power Mode registers (Tigerlake and beyond)
+		- PMC quirks as needed to enable SLPS0/S0ix
drivers/platform/x86/intel/pmc/Makefile new file +5 -0
new file mode 100644
index 000000000000..e0182e10a035
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-$(CONFIG_INTEL_PMC_CORE)	+= core.o
+obj-$(CONFIG_INTEL_PMC_CORE)	+= pltdrv.o
drivers/platform/x86/intel/pmc/core.c renamed from drivers/platform/x86/intel_pmc_core.c +1 -1
similarity index 99%
rename from drivers/platform/x86/intel_pmc_core.c
rename to drivers/platform/x86/intel/pmc/core.c
index b0e486a6bdfb..f9de78b08e5d 100644
@@ -31,7 +31,7 @@
 #include <asm/msr.h>
 #include <asm/tsc.h>
 
-#include "intel_pmc_core.h"
+#include "core.h"
 
 #define ACPI_S0IX_DSM_UUID		"57a6512e-3979-4e9d-9708-ff13b2508972"
 #define ACPI_GET_LOW_MODE_REGISTERS	1
drivers/platform/x86/intel/pmc/core.h renamed from drivers/platform/x86/intel_pmc_core.h +0 -0
similarity index 100%
rename from drivers/platform/x86/intel_pmc_core.h
rename to drivers/platform/x86/intel/pmc/core.h
drivers/platform/x86/intel/pmc/pltdrv.c renamed from drivers/platform/x86/intel_pmc_core_pltdrv.c +0 -0
similarity index 100%
rename from drivers/platform/x86/intel_pmc_core_pltdrv.c
rename to drivers/platform/x86/intel/pmc/pltdrv.c
Signature · 1 line
2.25.1
#2 lore raw

Re: [PATCH v5 1/5] platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder

Quoted 140 lines · Gayatri Kammela

As part of collecting Intel x86 specific drivers in their own folder, move intel_pmc_core* files to its own subfolder there.

---

MAINTAINERS                                   |  2 +-
drivers/platform/x86/Kconfig                  | 21 ------------------
drivers/platform/x86/Makefile                 |  1 -
drivers/platform/x86/intel/Kconfig            |  1 +
drivers/platform/x86/intel/Makefile           |  1 +
drivers/platform/x86/intel/pmc/Kconfig        | 22 +++++++++++++++++++
drivers/platform/x86/intel/pmc/Makefile       |  5 +++++
.../{intel_pmc_core.c => intel/pmc/core.c}    |  2 +-
.../{intel_pmc_core.h => intel/pmc/core.h}    |  0
.../pmc/pltdrv.c}                             |  0
10 files changed, 31 insertions(+), 24 deletions(-)

create mode 100644 drivers/platform/x86/intel/pmc/Kconfig
create mode 100644 drivers/platform/x86/intel/pmc/Makefile
rename drivers/platform/x86/{intel_pmc_core.c => intel/pmc/core.c} (99%) rename drivers/platform/x86/{intel_pmc_core.h => intel/pmc/core.h} (100%) rename drivers/platform/x86/{intel_pmc_core_pltdrv.c => intel/pmc/pltdrv.c} (100%)

MAINTAINERS +0 -0
index 6c8be735cc91..c5d610885bf2 100644
@@ -9477,7 +9477,7 @@ M:	David E Box <[email protected]>

L: [email protected]
S: Maintained
F: Documentation/ABI/testing/sysfs-platform-intel-pmc

MAINTAINERS +1 -1
-F:	drivers/platform/x86/intel_pmc_core*
+F:	drivers/platform/x86/intel/pmc/core*

INTEL PMIC GPIO DRIVERS
M: Andy Shevchenko <[email protected]>

drivers/platform/x86/Kconfig +0 -21
index 7d385c3b2239..cae72922f448 100644
@@ -1184,27 +1184,6 @@ config INTEL_MRFLD_PWRBTN
 	  To compile this driver as a module, choose M here: the module
 	  will be called intel_mrfld_pwrbtn.
 
-config INTEL_PMC_CORE
-	tristate "Intel PMC Core driver"
-	depends on PCI
-	depends on ACPI
-	help
-	  The Intel Platform Controller Hub for Intel Core SoCs provides access
-	  to Power Management Controller registers via various interfaces. This
-	  driver can utilize debugging capabilities and supported features as
-	  exposed by the Power Management Controller. It also may perform some
-	  tasks in the PMC in order to enable transition into the SLPS0 state.
-	  It should be selected on all Intel platforms supported by the driver.
-
-	  Supported features:
-		- SLP_S0_RESIDENCY counter
-		- PCH IP Power Gating status
-		- LTR Ignore / LTR Show
-		- MPHY/PLL gating status (Sunrisepoint PCH only)
-		- SLPS0 Debug registers (Cannonlake/Icelake PCH)
-		- Low Power Mode registers (Tigerlake and beyond)
-		- PMC quirks as needed to enable SLPS0/S0ix
-

config INTEL_PMT_CLASS
tristate
help

drivers/platform/x86/Makefile +0 -0
index 7ee369aab10d..43d36f8c36f1 100644
@@ -128,7 +128,6 @@ obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)		+= intel-uncore-frequency.o

obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU) += intel_bxtwc_tmu.o
obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o
obj-$(CONFIG_INTEL_MRFLD_PWRBTN) += intel_mrfld_pwrbtn.o
-obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o intel_pmc_core_pltdrv.o
obj-$(CONFIG_INTEL_PMT_CLASS) += intel_pmt_class.o
obj-$(CONFIG_INTEL_PMT_TELEMETRY) += intel_pmt_telemetry.o
obj-$(CONFIG_INTEL_PMT_CRASHLOG) += intel_pmt_crashlog.o

drivers/platform/x86/intel/Kconfig +0 -0
index f2eef337eb98..8ca021785f67 100644
@@ -18,5 +18,6 @@ if X86_PLATFORM_DRIVERS_INTEL
 

source "drivers/platform/x86/intel/int33fe/Kconfig" source "drivers/platform/x86/intel/int3472/Kconfig" +source "drivers/platform/x86/intel/pmc/Kconfig"

endif # X86_PLATFORM_DRIVERS_INTEL

drivers/platform/x86/intel/Makefile +0 -0
index 0653055942d5..49962f4dfdec 100644
@@ -6,3 +6,4 @@
 

obj-$(CONFIG_INTEL_CHT_INT33FE) += int33fe/
obj-$(CONFIG_INTEL_SKL_INT3472) += int3472/

drivers/platform/x86/intel/Makefile +1 -0
+obj-$(CONFIG_INTEL_PMC_CORE)		+= pmc/
drivers/platform/x86/intel/pmc/Kconfig new file +22 -0
new file mode 100644
index 000000000000..b4c955a35674
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config INTEL_PMC_CORE
+	tristate "Intel PMC Core driver"
+	depends on PCI
+	depends on ACPI
+	help
+	  The Intel Platform Controller Hub for Intel Core SoCs provides access
+	  to Power Management Controller registers via various interfaces. This
+	  driver can utilize debugging capabilities and supported features as
+	  exposed by the Power Management Controller. It also may perform some
+	  tasks in the PMC in order to enable transition into the SLPS0 state.
+	  It should be selected on all Intel platforms supported by the driver.
+
+	  Supported features:
+		- SLP_S0_RESIDENCY counter
+		- PCH IP Power Gating status
+		- LTR Ignore / LTR Show
+		- MPHY/PLL gating status (Sunrisepoint PCH only)
+		- SLPS0 Debug registers (Cannonlake/Icelake PCH)
+		- Low Power Mode registers (Tigerlake and beyond)
+		- PMC quirks as needed to enable SLPS0/S0ix
drivers/platform/x86/intel/pmc/Makefile new file +0 -0
new file mode 100644
index 000000000000..e0182e10a035

drivers/platform/x86/intel/pmc/Makefile line 5

Quoted 5 lines
drivers/platform/x86/intel/pmc/Makefile new file +5 -0
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-$(CONFIG_INTEL_PMC_CORE)	+= core.o
+obj-$(CONFIG_INTEL_PMC_CORE)	+= pltdrv.o

is the module rename really intentional? If so, it needs to be renamed to something else as just calling it core may conflict with other equally badly named modules.

error: the following would cause module name conflict:
GEN .version
drivers/misc/c2port/core.ko drivers/platform/x86/intel/pmc/core.ko
make[2]: *** [Makefile:1417: modules_check] Error 1 make[2]: *** Waiting for unfinished jobs....

This builds for me by restoring the previous module names

-----8<------

drivers/platform/x86/intel/pmc/Makefile +5 -2
index e0182e10a035..9bfe8ab8fd64 100644
@@ -1,5 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 #
 
-obj-$(CONFIG_INTEL_PMC_CORE)	+= core.o
-obj-$(CONFIG_INTEL_PMC_CORE)	+= pltdrv.o
+obj-$(CONFIG_INTEL_PMC_CORE)	+= intel_pmc_core.o
+obj-$(CONFIG_INTEL_PMC_CORE)	+= intel_pmc_core_pltdrv.o
+
+intel_pmc_core-y		+= core.o
+intel_pmc_core_pltdrv-y		+= pltdrv.o

-----8<------

Lucas De Marchi

Quoted 27 lines
drivers/platform/x86/intel/pmc/core.c renamed from drivers/platform/x86/intel_pmc_core.c +1 -1
similarity index 99%
rename from drivers/platform/x86/intel_pmc_core.c
rename to drivers/platform/x86/intel/pmc/core.c
index b0e486a6bdfb..f9de78b08e5d 100644
@@ -31,7 +31,7 @@
 #include <asm/msr.h>
 #include <asm/tsc.h>
 
-#include "intel_pmc_core.h"
+#include "core.h"
 
 #define ACPI_S0IX_DSM_UUID		"57a6512e-3979-4e9d-9708-ff13b2508972"
 #define ACPI_GET_LOW_MODE_REGISTERS	1
drivers/platform/x86/intel/pmc/core.h renamed from drivers/platform/x86/intel_pmc_core.h +0 -0
similarity index 100%
rename from drivers/platform/x86/intel_pmc_core.h
rename to drivers/platform/x86/intel/pmc/core.h
drivers/platform/x86/intel/pmc/pltdrv.c renamed from drivers/platform/x86/intel_pmc_core_pltdrv.c +0 -0
similarity index 100%
rename from drivers/platform/x86/intel_pmc_core_pltdrv.c
rename to drivers/platform/x86/intel/pmc/pltdrv.c
Signature · 1 line
2.25.1
#3 lore raw

RE: [PATCH v5 1/5] platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder

Quoted 173 lines

-----Original Message-----
From: De Marchi, Lucas <[email protected]>
Sent: Monday, August 16, 2021 10:38 AM
To: Kammela, Gayatri <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; Pandruvada, Srinivas <[email protected]>; Box, David E <[email protected]>; [email protected]; Mashiah, Tamar <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; Andy Shevchenko <[email protected]>
Subject: Re: [PATCH v5 1/5] platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder

Quoted 49 lines · Gayatri Kammela

As part of collecting Intel x86 specific drivers in their own folder, move intel_pmc_core* files to its own subfolder there.

---

MAINTAINERS                                   |  2 +-
drivers/platform/x86/Kconfig                  | 21 ------------------
drivers/platform/x86/Makefile                 |  1 -
drivers/platform/x86/intel/Kconfig            |  1 +
drivers/platform/x86/intel/Makefile           |  1 +
drivers/platform/x86/intel/pmc/Kconfig        | 22 +++++++++++++++++++
drivers/platform/x86/intel/pmc/Makefile       |  5 +++++
.../{intel_pmc_core.c => intel/pmc/core.c}    |  2 +-
.../{intel_pmc_core.h => intel/pmc/core.h}    |  0
.../pmc/pltdrv.c}                             |  0
10 files changed, 31 insertions(+), 24 deletions(-)  create mode

100644 drivers/platform/x86/intel/pmc/Kconfig
create mode 100644 drivers/platform/x86/intel/pmc/Makefile rename drivers/platform/x86/{intel_pmc_core.c => intel/pmc/core.c} (99%) rename drivers/platform/x86/{intel_pmc_core.h => intel/pmc/core.h} (100%) rename drivers/platform/x86/{intel_pmc_core_pltdrv.c => intel/pmc/pltdrv.c} (100%)

MAINTAINERS +0 -0
index 6c8be735cc91..c5d610885bf2 100644
@@ -9477,7 +9477,7 @@ M:	David E Box <[email protected]>

L: [email protected]
S: Maintained
F: Documentation/ABI/testing/sysfs-platform-intel-pmc

MAINTAINERS +1 -1
-F:	drivers/platform/x86/intel_pmc_core*
+F:	drivers/platform/x86/intel/pmc/core*

INTEL PMIC GPIO DRIVERS
M: Andy Shevchenko <[email protected]>

(quoted diff) +0 -0

b/drivers/platform/x86/Kconfig index 7d385c3b2239..cae72922f448 100644

drivers/platform/x86/Kconfig config INTEL_MRFLD_PWRBTN · line 1192

Quoted 9 lines
drivers/platform/x86/Kconfig +0 -6
@@ -1184,27 +1184,6 @@ config INTEL_MRFLD_PWRBTN
 	  To compile this driver as a module, choose M here: the module
 	  will be called intel_mrfld_pwrbtn.
 
-config INTEL_PMC_CORE
-	tristate "Intel PMC Core driver"
-	depends on PCI
-	depends on ACPI
-	help
-	  The Intel Platform Controller Hub for Intel Core SoCs provides

access

drivers/platform/x86/Kconfig config INTEL_MRFLD_PWRBTN · line 1193

Quoted 1 line
drivers/platform/x86/Kconfig +0 -1
-	  to Power Management Controller registers via various interfaces.

This

drivers/platform/x86/Kconfig config INTEL_MRFLD_PWRBTN · line 1195

Quoted 2 lines
drivers/platform/x86/Kconfig +0 -2
-	  driver can utilize debugging capabilities and supported features as
-	  exposed by the Power Management Controller. It also may perform

some

Quoted 15 lines
drivers/platform/x86/Kconfig +0 -12
-	  tasks in the PMC in order to enable transition into the SLPS0 state.
-	  It should be selected on all Intel platforms supported by the driver.
-
-	  Supported features:
-		- SLP_S0_RESIDENCY counter
-		- PCH IP Power Gating status
-		- LTR Ignore / LTR Show
-		- MPHY/PLL gating status (Sunrisepoint PCH only)
-		- SLPS0 Debug registers (Cannonlake/Icelake PCH)
-		- Low Power Mode registers (Tigerlake and beyond)
-		- PMC quirks as needed to enable SLPS0/S0ix
-

config INTEL_PMT_CLASS
tristate
help

Quoted 2 lines
(quoted diff) +0 -0

b/drivers/platform/x86/Makefile index 7ee369aab10d..43d36f8c36f1

100644

drivers/platform/x86/Makefile obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)

Quoted 3 lines
drivers/platform/x86/Makefile +0 -0
@@ -128,7 +128,6 @@ obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)
		+= intel-uncore-frequency.o
Quoted 4 lines

obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU) += intel_bxtwc_tmu.o
obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o
obj-$(CONFIG_INTEL_MRFLD_PWRBTN) += intel_mrfld_pwrbtn.o
-obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o

intel_pmc_core_pltdrv.o

Quoted 32 lines

obj-$(CONFIG_INTEL_PMT_CLASS) += intel_pmt_class.o
obj-$(CONFIG_INTEL_PMT_TELEMETRY) += intel_pmt_telemetry.o
obj-$(CONFIG_INTEL_PMT_CRASHLOG) += intel_pmt_crashlog.o

drivers/platform/x86/intel/Kconfig +0 -0
index f2eef337eb98..8ca021785f67 100644
@@ -18,5 +18,6 @@ if X86_PLATFORM_DRIVERS_INTEL
 

source "drivers/platform/x86/intel/int33fe/Kconfig" source "drivers/platform/x86/intel/int3472/Kconfig" +source "drivers/platform/x86/intel/pmc/Kconfig"

endif # X86_PLATFORM_DRIVERS_INTEL

drivers/platform/x86/intel/Makefile +0 -0
index 0653055942d5..49962f4dfdec 100644
@@ -6,3 +6,4 @@
 

obj-$(CONFIG_INTEL_CHT_INT33FE) += int33fe/
obj-$(CONFIG_INTEL_SKL_INT3472) += int3472/

drivers/platform/x86/intel/Makefile +1 -0
+obj-$(CONFIG_INTEL_PMC_CORE)		+= pmc/
drivers/platform/x86/intel/pmc/Kconfig new file +0 -0
new file mode 100644
index 000000000000..b4c955a35674

drivers/platform/x86/intel/pmc/Kconfig line 8

Quoted 8 lines
drivers/platform/x86/intel/pmc/Kconfig new file +8 -0
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config INTEL_PMC_CORE
+	tristate "Intel PMC Core driver"
+	depends on PCI
+	depends on ACPI
+	help
+	  The Intel Platform Controller Hub for Intel Core SoCs provides

access

drivers/platform/x86/intel/pmc/Kconfig line 9

Quoted 1 line
drivers/platform/x86/intel/pmc/Kconfig new file +1 -0
+	  to Power Management Controller registers via various interfaces.

This

drivers/platform/x86/intel/pmc/Kconfig line 11

Quoted 2 lines
drivers/platform/x86/intel/pmc/Kconfig new file +2 -0
+	  driver can utilize debugging capabilities and supported features as
+	  exposed by the Power Management Controller. It also may perform

some

Quoted 19 lines
drivers/platform/x86/intel/pmc/Kconfig new file +11 -0
+	  tasks in the PMC in order to enable transition into the SLPS0 state.
+	  It should be selected on all Intel platforms supported by the driver.
+
+	  Supported features:
+		- SLP_S0_RESIDENCY counter
+		- PCH IP Power Gating status
+		- LTR Ignore / LTR Show
+		- MPHY/PLL gating status (Sunrisepoint PCH only)
+		- SLPS0 Debug registers (Cannonlake/Icelake PCH)
+		- Low Power Mode registers (Tigerlake and beyond)
+		- PMC quirks as needed to enable SLPS0/S0ix
drivers/platform/x86/intel/pmc/Makefile new file +1 -0
new file mode 100644
index 000000000000..e0182e10a035
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
Quoted 8 lines

drivers/platform/x86/intel/pmc/Makefile line 5

Quoted 4 lines
drivers/platform/x86/intel/pmc/Makefile new file +4 -0
+#
+
+obj-$(CONFIG_INTEL_PMC_CORE)	+= core.o
+obj-$(CONFIG_INTEL_PMC_CORE)	+= pltdrv.o

is the module rename really intentional? If so, it needs to be renamed to something else as just calling it core may conflict with other equally badly named modules.

Hi Lucas! Yes, the module rename is intentional. Thanks for reporting the issue. This issue has been addressed in V6. I have just sent the V7 https://patchwork.kernel.org/project/platform-driver-x86/list/

Quoted 63 lines

error: the following would cause module name conflict:
GEN .version
drivers/misc/c2port/core.ko drivers/platform/x86/intel/pmc/core.ko
make[2]: *** [Makefile:1417: modules_check] Error 1 make[2]: *** Waiting for unfinished jobs....

This builds for me by restoring the previous module names

-----8<------

drivers/platform/x86/intel/pmc/Makefile +5 -3
index e0182e10a035..9bfe8ab8fd64 100644
@@ -1,5 +1,8 @@
  # SPDX-License-Identifier: GPL-2.0
  #
 
-obj-$(CONFIG_INTEL_PMC_CORE)	+= core.o
-obj-$(CONFIG_INTEL_PMC_CORE)	+= pltdrv.o
+obj-$(CONFIG_INTEL_PMC_CORE)	+= intel_pmc_core.o
+obj-$(CONFIG_INTEL_PMC_CORE)	+= intel_pmc_core_pltdrv.o
+
+intel_pmc_core-y		+= core.o
+intel_pmc_core_pltdrv-y		+= pltdrv.o
-----8<------

Lucas De Marchi

Quoted 9 lines
drivers/platform/x86/intel/pmc/core.c renamed from drivers/platform/x86/intel_pmc_core.c +0 -0
similarity index 99%
rename from drivers/platform/x86/intel_pmc_core.c
rename to drivers/platform/x86/intel/pmc/core.c
index b0e486a6bdfb..f9de78b08e5d 100644

drivers/platform/x86/intel/pmc/core.c line 36

Quoted 7 lines
drivers/platform/x86/intel/pmc/core.c renamed from drivers/platform/x86/intel_pmc_core.c +1 -1
@@ -31,7 +31,7 @@
 #include <asm/msr.h>
 #include <asm/tsc.h>
 
-#include "intel_pmc_core.h"
+#include "core.h"
 
 #define ACPI_S0IX_DSM_UUID		"57a6512e-3979-4e9d-9708-

ff13b2508972"

Quoted 14 lines
drivers/platform/x86/intel/pmc/core.c renamed from drivers/platform/x86/intel_pmc_core.c +0 -0
 #define ACPI_GET_LOW_MODE_REGISTERS	1
drivers/platform/x86/intel/pmc/core.h renamed from drivers/platform/x86/intel_pmc_core.h +0 -0
similarity index 100%
rename from drivers/platform/x86/intel_pmc_core.h
rename to drivers/platform/x86/intel/pmc/core.h
drivers/platform/x86/intel/pmc/pltdrv.c renamed from drivers/platform/x86/intel_pmc_core_pltdrv.c +0 -1
similarity index 100%
rename from drivers/platform/x86/intel_pmc_core_pltdrv.c
rename to drivers/platform/x86/intel/pmc/pltdrv.c
--

2.25.1

#4 lore raw

Re: [PATCH v5 1/5] platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder

Quoted 181 lines · Gayatri
Quoted 173 lines

-----Original Message-----
From: De Marchi, Lucas <[email protected]>
Sent: Monday, August 16, 2021 10:38 AM
To: Kammela, Gayatri <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; Pandruvada, Srinivas <[email protected]>; Box, David E <[email protected]>; [email protected]; Mashiah, Tamar <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; Andy Shevchenko <[email protected]>
Subject: Re: [PATCH v5 1/5] platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder

Quoted 49 lines · Gayatri Kammela

As part of collecting Intel x86 specific drivers in their own folder, move intel_pmc_core* files to its own subfolder there.

---

MAINTAINERS                                   |  2 +-
drivers/platform/x86/Kconfig                  | 21 ------------------
drivers/platform/x86/Makefile                 |  1 -
drivers/platform/x86/intel/Kconfig            |  1 +
drivers/platform/x86/intel/Makefile           |  1 +
drivers/platform/x86/intel/pmc/Kconfig        | 22 +++++++++++++++++++
drivers/platform/x86/intel/pmc/Makefile       |  5 +++++
.../{intel_pmc_core.c => intel/pmc/core.c}    |  2 +-
.../{intel_pmc_core.h => intel/pmc/core.h}    |  0
.../pmc/pltdrv.c}                             |  0
10 files changed, 31 insertions(+), 24 deletions(-)  create mode

100644 drivers/platform/x86/intel/pmc/Kconfig
create mode 100644 drivers/platform/x86/intel/pmc/Makefile rename drivers/platform/x86/{intel_pmc_core.c => intel/pmc/core.c} (99%) rename drivers/platform/x86/{intel_pmc_core.h => intel/pmc/core.h} (100%) rename drivers/platform/x86/{intel_pmc_core_pltdrv.c => intel/pmc/pltdrv.c} (100%)

MAINTAINERS +0 -0
index 6c8be735cc91..c5d610885bf2 100644
@@ -9477,7 +9477,7 @@ M:     David E Box <[email protected]>
L:  [email protected]
S:  Maintained
F:  Documentation/ABI/testing/sysfs-platform-intel-pmc
MAINTAINERS +1 -1
-F:  drivers/platform/x86/intel_pmc_core*
+F:  drivers/platform/x86/intel/pmc/core*

INTEL PMIC GPIO DRIVERS
M: Andy Shevchenko <[email protected]>

(quoted diff) +0 -0

b/drivers/platform/x86/Kconfig index 7d385c3b2239..cae72922f448 100644

drivers/platform/x86/Kconfig config INTEL_MRFLD_PWRBTN · line 1192

Quoted 9 lines
drivers/platform/x86/Kconfig +0 -6
@@ -1184,27 +1184,6 @@ config INTEL_MRFLD_PWRBTN
      To compile this driver as a module, choose M here: the module
      will be called intel_mrfld_pwrbtn.
 
-config INTEL_PMC_CORE
-    tristate "Intel PMC Core driver"
-    depends on PCI
-    depends on ACPI
-    help
-      The Intel Platform Controller Hub for Intel Core SoCs provides

access

drivers/platform/x86/Kconfig config INTEL_MRFLD_PWRBTN · line 1193

Quoted 1 line
drivers/platform/x86/Kconfig +0 -1
-      to Power Management Controller registers via various interfaces.

This

drivers/platform/x86/Kconfig config INTEL_MRFLD_PWRBTN · line 1195

Quoted 2 lines
drivers/platform/x86/Kconfig +0 -2
-      driver can utilize debugging capabilities and supported features as
-      exposed by the Power Management Controller. It also may perform

some

Quoted 15 lines
drivers/platform/x86/Kconfig +0 -12
-      tasks in the PMC in order to enable transition into the SLPS0 state.
-      It should be selected on all Intel platforms supported by the driver.
-
-      Supported features:
-            - SLP_S0_RESIDENCY counter
-            - PCH IP Power Gating status
-            - LTR Ignore / LTR Show
-            - MPHY/PLL gating status (Sunrisepoint PCH only)
-            - SLPS0 Debug registers (Cannonlake/Icelake PCH)
-            - Low Power Mode registers (Tigerlake and beyond)
-            - PMC quirks as needed to enable SLPS0/S0ix
-

config INTEL_PMT_CLASS
tristate
help

Quoted 2 lines
(quoted diff) +0 -0

b/drivers/platform/x86/Makefile index 7ee369aab10d..43d36f8c36f1

100644

drivers/platform/x86/Makefile obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)

Quoted 3 lines
drivers/platform/x86/Makefile +0 -0
@@ -128,7 +128,6 @@ obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)
              += intel-uncore-frequency.o
> obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU)  += intel_bxtwc_tmu.o
Quoted 3 lines

obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o
obj-$(CONFIG_INTEL_MRFLD_PWRBTN) += intel_mrfld_pwrbtn.o
-obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o

intel_pmc_core_pltdrv.o

Quoted 32 lines

obj-$(CONFIG_INTEL_PMT_CLASS) += intel_pmt_class.o
obj-$(CONFIG_INTEL_PMT_TELEMETRY) += intel_pmt_telemetry.o
obj-$(CONFIG_INTEL_PMT_CRASHLOG) += intel_pmt_crashlog.o

drivers/platform/x86/intel/Kconfig +0 -0
index f2eef337eb98..8ca021785f67 100644
@@ -18,5 +18,6 @@ if X86_PLATFORM_DRIVERS_INTEL
 

source "drivers/platform/x86/intel/int33fe/Kconfig" source "drivers/platform/x86/intel/int3472/Kconfig" +source "drivers/platform/x86/intel/pmc/Kconfig"

endif # X86_PLATFORM_DRIVERS_INTEL

drivers/platform/x86/intel/Makefile +0 -0
index 0653055942d5..49962f4dfdec 100644
@@ -6,3 +6,4 @@
 

obj-$(CONFIG_INTEL_CHT_INT33FE) += int33fe/
obj-$(CONFIG_INTEL_SKL_INT3472) += int3472/

drivers/platform/x86/intel/Makefile +1 -0
+obj-$(CONFIG_INTEL_PMC_CORE)                += pmc/
drivers/platform/x86/intel/pmc/Kconfig new file +0 -0
new file mode 100644
index 000000000000..b4c955a35674

drivers/platform/x86/intel/pmc/Kconfig line 8

Quoted 8 lines
drivers/platform/x86/intel/pmc/Kconfig new file +8 -0
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config INTEL_PMC_CORE
+    tristate "Intel PMC Core driver"
+    depends on PCI
+    depends on ACPI
+    help
+      The Intel Platform Controller Hub for Intel Core SoCs provides

access

drivers/platform/x86/intel/pmc/Kconfig line 9

Quoted 1 line
drivers/platform/x86/intel/pmc/Kconfig new file +1 -0
+      to Power Management Controller registers via various interfaces.

This

drivers/platform/x86/intel/pmc/Kconfig line 11

Quoted 2 lines
drivers/platform/x86/intel/pmc/Kconfig new file +2 -0
+      driver can utilize debugging capabilities and supported features as
+      exposed by the Power Management Controller. It also may perform

some

Quoted 19 lines
drivers/platform/x86/intel/pmc/Kconfig new file +11 -0
+      tasks in the PMC in order to enable transition into the SLPS0 state.
+      It should be selected on all Intel platforms supported by the driver.
+
+      Supported features:
+            - SLP_S0_RESIDENCY counter
+            - PCH IP Power Gating status
+            - LTR Ignore / LTR Show
+            - MPHY/PLL gating status (Sunrisepoint PCH only)
+            - SLPS0 Debug registers (Cannonlake/Icelake PCH)
+            - Low Power Mode registers (Tigerlake and beyond)
+            - PMC quirks as needed to enable SLPS0/S0ix
drivers/platform/x86/intel/pmc/Makefile new file +1 -0
new file mode 100644
index 000000000000..e0182e10a035
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
Quoted 8 lines

drivers/platform/x86/intel/pmc/Makefile line 5

Quoted 4 lines
drivers/platform/x86/intel/pmc/Makefile new file +4 -0
+#
+
+obj-$(CONFIG_INTEL_PMC_CORE)        += core.o
+obj-$(CONFIG_INTEL_PMC_CORE)        += pltdrv.o

is the module rename really intentional? If so, it needs to be renamed to something else as just calling it core may conflict with other equally badly named modules.

Quoted 1 line

Hi Lucas! Yes, the module rename is intentional. Thanks for reporting the issue. This issue has been addressed in V6. I have just sent the V7 https://patchwork.kernel.org/project/platform-driver-x86/list/

ok, thanks! I guess I forgot the -c flag to b4, that correctly downloads v7:

	b4 am -c b2cb6b10b75445acceab3030c3a9aa585e7c7b65.1626459866.git.gayatri.kammela@intel.com
	...
	New revision: [PATCH v7 0/5] Add Alder Lake PCH-S support to PMC core driver

Lucas De Marchi

#5 lore raw

PATCH v5 2/5 platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver

In reply to Gayatri Kammela

Add Alder Lake client and mobile support to pmc core driver.

---
 drivers/platform/x86/intel/pmc/core.c | 68 +++++++++++++++++++++++++++
 drivers/platform/x86/intel/pmc/core.h |  2 +
 2 files changed, 70 insertions(+)
drivers/platform/x86/intel/pmc/core.c +68 -0
index f9de78b08e5d..d4be15897d04 100644
@@ -645,6 +645,73 @@ static void pmc_core_get_tgl_lpm_reqs(struct platform_device *pdev)
 	ACPI_FREE(out_obj);
 }
 
+/* Alder Lake: PGD PFET Enable Ack Status Register(s) bitmap */
+static const struct pmc_bit_map adl_pfear_map[] = {
+	{"SPI/eSPI",		BIT(2)},
+	{"XHCI",		BIT(3)},
+	{"SPA",			BIT(4)},
+	{"SPB",			BIT(5)},
+	{"SPC",			BIT(6)},
+	{"GBE",			BIT(7)},
+
+	{"SATA",		BIT(0)},
+	{"HDA_PGD0",		BIT(1)},
+	{"HDA_PGD1",		BIT(2)},
+	{"HDA_PGD2",		BIT(3)},
+	{"HDA_PGD3",		BIT(4)},
+	{"SPD",			BIT(5)},
+	{"LPSS",		BIT(6)},
+
+	{"SMB",			BIT(0)},
+	{"ISH",			BIT(1)},
+	{"ITH",			BIT(3)},
+
+	{"XDCI",		BIT(1)},
+	{"DCI",			BIT(2)},
+	{"CSE",			BIT(3)},
+	{"CSME_KVM",		BIT(4)},
+	{"CSME_PMT",		BIT(5)},
+	{"CSME_CLINK",		BIT(6)},
+	{"CSME_PTIO",		BIT(7)},
+
+	{"CSME_USBR",		BIT(0)},
+	{"CSME_SUSRAM",		BIT(1)},
+	{"CSME_SMT1",		BIT(2)},
+	{"CSME_SMS2",		BIT(4)},
+	{"CSME_SMS1",		BIT(5)},
+	{"CSME_RTC",		BIT(6)},
+	{"CSME_PSF",		BIT(7)},
+
+	{"CNVI",		BIT(3)},
+
+	{"HDA_PGD4",		BIT(2)},
+	{"HDA_PGD5",		BIT(3)},
+	{"HDA_PGD6",		BIT(4)},
+	{}
+};
+
+static const struct pmc_bit_map *ext_adl_pfear_map[] = {
+	/*
+	 * Check intel_pmc_core_ids[] users of cnp_reg_map for
+	 * a list of core SoCs using this.
+	 */
+	adl_pfear_map,
+	NULL
+};
+
+static const struct pmc_reg_map adl_reg_map = {
+	.pfear_sts = ext_adl_pfear_map,
+	.slp_s0_offset = ADL_PMC_SLP_S0_RES_COUNTER_OFFSET,
+	.slp_s0_res_counter_step = TGL_PMC_SLP_S0_RES_COUNTER_STEP,
+	.msr_sts = msr_map,
+	.ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET,
+	.regmap_length = CNP_PMC_MMIO_REG_LEN,
+	.ppfear0_offset = CNP_PMC_HOST_PPFEAR0A,
+	.ppfear_buckets = CNP_PPFEAR_NUM_ENTRIES,
+	.pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET,
+	.pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT,
+};
+
 static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset)
 {
 	return readl(pmcdev->regbase + reg_offset);
@@ -1574,6 +1641,7 @@ static const struct x86_cpu_id intel_pmc_core_ids[] = {
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	&icl_reg_map),
 	X86_MATCH_INTEL_FAM6_MODEL(ROCKETLAKE,		&tgl_reg_map),
 	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L,		&tgl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE,		&adl_reg_map),
 	{}
 };
 
drivers/platform/x86/intel/pmc/core.h +2 -0
index e8dae9c6c45f..c0ca20b32c6b 100644
@@ -197,6 +197,8 @@ enum ppfear_regs {
 #define TGL_NUM_IP_IGN_ALLOWED			23
 #define TGL_PMC_LPM_RES_COUNTER_STEP_X2		61	/* 30.5us * 2 */
 
+#define ADL_PMC_SLP_S0_RES_COUNTER_OFFSET	0x1098
+
 /*
  * Tigerlake Power Management Controller register offsets
  */
Signature · 1 line
2.25.1
#6 lore raw

PATCH v5 3/5 platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake

In reply to Gayatri Kammela

Add support to show the Latency Tolerance Reporting for the IPs on the Alder Lake PCH as reported by the PMC. This LTR support on Alder Lake is slightly different from the Cannon lake PCH that is being reused by all platforms till Tiger Lake.

---
 drivers/platform/x86/intel/pmc/core.c | 39 +++++++++++++++++++++++++++
 drivers/platform/x86/intel/pmc/core.h |  2 ++
 2 files changed, 41 insertions(+)
drivers/platform/x86/intel/pmc/core.c +39 -0
index d4be15897d04..f2646fdf6c90 100644
@@ -699,10 +699,48 @@ static const struct pmc_bit_map *ext_adl_pfear_map[] = {
 	NULL
 };
 
+static const struct pmc_bit_map adl_ltr_show_map[] = {
+	{"SOUTHPORT_A",		CNP_PMC_LTR_SPA},
+	{"SOUTHPORT_B",		CNP_PMC_LTR_SPB},
+	{"SATA",		CNP_PMC_LTR_SATA},
+	{"GIGABIT_ETHERNET",	CNP_PMC_LTR_GBE},
+	{"XHCI",		CNP_PMC_LTR_XHCI},
+	{"SOUTHPORT_F",		ADL_PMC_LTR_SPF},
+	{"ME",			CNP_PMC_LTR_ME},
+	/* EVA is Enterprise Value Add, doesn't really exist on PCH */
+	{"SATA1",		CNP_PMC_LTR_EVA},
+	{"SOUTHPORT_C",		CNP_PMC_LTR_SPC},
+	{"HD_AUDIO",		CNP_PMC_LTR_AZ},
+	{"CNV",			CNP_PMC_LTR_CNV},
+	{"LPSS",		CNP_PMC_LTR_LPSS},
+	{"SOUTHPORT_D",		CNP_PMC_LTR_SPD},
+	{"SOUTHPORT_E",		CNP_PMC_LTR_SPE},
+	{"SATA2",		CNP_PMC_LTR_CAM},
+	{"ESPI",		CNP_PMC_LTR_ESPI},
+	{"SCC",			CNP_PMC_LTR_SCC},
+	{"ISH",			CNP_PMC_LTR_ISH},
+	{"UFSX2",		CNP_PMC_LTR_UFSX2},
+	{"EMMC",		CNP_PMC_LTR_EMMC},
+	/*
+	 * Check intel_pmc_core_ids[] users of cnp_reg_map for
+	 * a list of core SoCs using this.
+	 */
+	{"WIGIG",		ICL_PMC_LTR_WIGIG},
+	{"THC0",		TGL_PMC_LTR_THC0},
+	{"THC1",		TGL_PMC_LTR_THC1},
+	{"SOUTHPORT_G",		CNP_PMC_LTR_RESERVED},
+
+	/* Below two cannot be used for LTR_IGNORE */
+	{"CURRENT_PLATFORM",	CNP_PMC_LTR_CUR_PLT},
+	{"AGGREGATED_SYSTEM",	CNP_PMC_LTR_CUR_ASLT},
+	{}
+};
+
 static const struct pmc_reg_map adl_reg_map = {
 	.pfear_sts = ext_adl_pfear_map,
 	.slp_s0_offset = ADL_PMC_SLP_S0_RES_COUNTER_OFFSET,
 	.slp_s0_res_counter_step = TGL_PMC_SLP_S0_RES_COUNTER_STEP,
+	.ltr_show_sts = adl_ltr_show_map,
 	.msr_sts = msr_map,
 	.ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET,
 	.regmap_length = CNP_PMC_MMIO_REG_LEN,
@@ -710,6 +748,7 @@ static const struct pmc_reg_map adl_reg_map = {
 	.ppfear_buckets = CNP_PPFEAR_NUM_ENTRIES,
 	.pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET,
 	.pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT,
+	.ltr_ignore_max = ADL_NUM_IP_IGN_ALLOWED,
 };
 
 static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset)
drivers/platform/x86/intel/pmc/core.h +2 -0
index c0ca20b32c6b..45b352ece6db 100644
@@ -197,6 +197,8 @@ enum ppfear_regs {
 #define TGL_NUM_IP_IGN_ALLOWED			23
 #define TGL_PMC_LPM_RES_COUNTER_STEP_X2		61	/* 30.5us * 2 */
 
+#define ADL_PMC_LTR_SPF				0x1C00
+#define ADL_NUM_IP_IGN_ALLOWED			23
 #define ADL_PMC_SLP_S0_RES_COUNTER_OFFSET	0x1098
 
 /*
Signature · 1 line
2.25.1
#7 lore raw

PATCH v5 4/5 platform/x86/intel: pmc/core: Add Alder Lake low power mode support for pmc core

In reply to Gayatri Kammela

Alder Lake has 14 status registers that are memory mapped. These registers show the status of the low power mode requirements. The registers are latched on every C10 entry or exit and on every s0ix.y entry/exit. Accessing these registers is useful for debugging any low power related activities.

Thus, add debugfs entry to access low power mode status registers.

---
 drivers/platform/x86/intel/pmc/core.c | 194 ++++++++++++++++++++++++++
 drivers/platform/x86/intel/pmc/core.h |  13 ++
 2 files changed, 207 insertions(+)
drivers/platform/x86/intel/pmc/core.c +194 -0
index f2646fdf6c90..e645ede591d8 100644
@@ -736,6 +736,189 @@ static const struct pmc_bit_map adl_ltr_show_map[] = {
 	{}
 };
 
+static const struct pmc_bit_map adl_clocksource_status_map[] = {
+	{"CLKPART1_OFF_STS",			BIT(0)},
+	{"CLKPART2_OFF_STS",			BIT(1)},
+	{"CLKPART3_OFF_STS",			BIT(2)},
+	{"CLKPART4_OFF_STS",			BIT(3)},
+	{"CLKPART5_OFF_STS",			BIT(4)},
+	{"CLKPART6_OFF_STS",			BIT(5)},
+	{"CLKPART7_OFF_STS",			BIT(6)},
+	{"CLKPART8_OFF_STS",			BIT(7)},
+	{"PCIE0PLL_OFF_STS",			BIT(10)},
+	{"PCIE1PLL_OFF_STS",			BIT(11)},
+	{"PCIE2PLL_OFF_STS",			BIT(12)},
+	{"PCIE3PLL_OFF_STS",			BIT(13)},
+	{"PCIE4PLL_OFF_STS",			BIT(14)},
+	{"PCIE5PLL_OFF_STS",			BIT(15)},
+	{"PCIE6PLL_OFF_STS",			BIT(16)},
+	{"USB2PLL_OFF_STS",			BIT(18)},
+	{"OCPLL_OFF_STS",			BIT(22)},
+	{"AUDIOPLL_OFF_STS",			BIT(23)},
+	{"GBEPLL_OFF_STS",			BIT(24)},
+	{"Fast_XTAL_Osc_OFF_STS",		BIT(25)},
+	{"AC_Ring_Osc_OFF_STS",			BIT(26)},
+	{"MC_Ring_Osc_OFF_STS",			BIT(27)},
+	{"SATAPLL_OFF_STS",			BIT(29)},
+	{"USB3PLL_OFF_STS",			BIT(31)},
+	{}
+};
+
+static const struct pmc_bit_map adl_power_gating_status_0_map[] = {
+	{"PMC_PGD0_PG_STS",			BIT(0)},
+	{"DMI_PGD0_PG_STS",			BIT(1)},
+	{"ESPISPI_PGD0_PG_STS",			BIT(2)},
+	{"XHCI_PGD0_PG_STS",			BIT(3)},
+	{"SPA_PGD0_PG_STS",			BIT(4)},
+	{"SPB_PGD0_PG_STS",			BIT(5)},
+	{"SPC_PGD0_PG_STS",			BIT(6)},
+	{"GBE_PGD0_PG_STS",			BIT(7)},
+	{"SATA_PGD0_PG_STS",			BIT(8)},
+	{"DSP_PGD0_PG_STS",			BIT(9)},
+	{"DSP_PGD1_PG_STS",			BIT(10)},
+	{"DSP_PGD2_PG_STS",			BIT(11)},
+	{"DSP_PGD3_PG_STS",			BIT(12)},
+	{"SPD_PGD0_PG_STS",			BIT(13)},
+	{"LPSS_PGD0_PG_STS",			BIT(14)},
+	{"SMB_PGD0_PG_STS",			BIT(16)},
+	{"ISH_PGD0_PG_STS",			BIT(17)},
+	{"NPK_PGD0_PG_STS",			BIT(19)},
+	{"PECI_PGD0_PG_STS",			BIT(21)},
+	{"XDCI_PGD0_PG_STS",			BIT(25)},
+	{"EXI_PGD0_PG_STS",			BIT(26)},
+	{"CSE_PGD0_PG_STS",			BIT(27)},
+	{"KVMCC_PGD0_PG_STS",			BIT(28)},
+	{"PMT_PGD0_PG_STS",			BIT(29)},
+	{"CLINK_PGD0_PG_STS",			BIT(30)},
+	{"PTIO_PGD0_PG_STS",			BIT(31)},
+	{}
+};
+
+static const struct pmc_bit_map adl_power_gating_status_1_map[] = {
+	{"USBR0_PGD0_PG_STS",			BIT(0)},
+	{"SMT1_PGD0_PG_STS",			BIT(2)},
+	{"CSMERTC_PGD0_PG_STS",			BIT(6)},
+	{"CSMEPSF_PGD0_PG_STS",			BIT(7)},
+	{"CNVI_PGD0_PG_STS",			BIT(19)},
+	{"DSP_PGD4_PG_STS",			BIT(26)},
+	{"SPG_PGD0_PG_STS",			BIT(27)},
+	{"SPE_PGD0_PG_STS",			BIT(28)},
+	{}
+};
+
+static const struct pmc_bit_map adl_power_gating_status_2_map[] = {
+	{"THC0_PGD0_PG_STS",			BIT(7)},
+	{"THC1_PGD0_PG_STS",			BIT(8)},
+	{"SPF_PGD0_PG_STS",			BIT(14)},
+	{}
+};
+
+static const struct pmc_bit_map adl_d3_status_0_map[] = {
+	{"ISH_D3_STS",				BIT(2)},
+	{"LPSS_D3_STS",				BIT(3)},
+	{"XDCI_D3_STS",				BIT(4)},
+	{"XHCI_D3_STS",				BIT(5)},
+	{"SPA_D3_STS",				BIT(12)},
+	{"SPB_D3_STS",				BIT(13)},
+	{"SPC_D3_STS",				BIT(14)},
+	{"SPD_D3_STS",				BIT(15)},
+	{"SPE_D3_STS",				BIT(16)},
+	{"DSP_D3_STS",				BIT(19)},
+	{"SATA_D3_STS",				BIT(20)},
+	{"DMI_D3_STS",				BIT(22)},
+	{}
+};
+
+static const struct pmc_bit_map adl_d3_status_1_map[] = {
+	{"GBE_D3_STS",				BIT(19)},
+	{"CNVI_D3_STS",				BIT(27)},
+	{}
+};
+
+static const struct pmc_bit_map adl_d3_status_2_map[] = {
+	{"CSMERTC_D3_STS",			BIT(1)},
+	{"CSE_D3_STS",				BIT(4)},
+	{"KVMCC_D3_STS",			BIT(5)},
+	{"USBR0_D3_STS",			BIT(6)},
+	{"SMT1_D3_STS",				BIT(8)},
+	{"PTIO_D3_STS",				BIT(16)},
+	{"PMT_D3_STS",				BIT(17)},
+	{}
+};
+
+static const struct pmc_bit_map adl_d3_status_3_map[] = {
+	{"THC0_D3_STS",				BIT(14)},
+	{"THC1_D3_STS",				BIT(15)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_req_status_0_map[] = {
+	{"ISH_VNN_REQ_STS",			BIT(2)},
+	{"ESPISPI_VNN_REQ_STS",			BIT(18)},
+	{"DSP_VNN_REQ_STS",			BIT(19)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_req_status_1_map[] = {
+	{"NPK_VNN_REQ_STS",			BIT(4)},
+	{"EXI_VNN_REQ_STS",			BIT(9)},
+	{"GBE_VNN_REQ_STS",			BIT(19)},
+	{"SMB_VNN_REQ_STS",			BIT(25)},
+	{"CNVI_VNN_REQ_STS",			BIT(27)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_req_status_2_map[] = {
+	{"CSMERTC_VNN_REQ_STS",			BIT(1)},
+	{"CSE_VNN_REQ_STS",			BIT(4)},
+	{"SMT1_VNN_REQ_STS",			BIT(8)},
+	{"CLINK_VNN_REQ_STS",			BIT(14)},
+	{"GPIOCOM4_VNN_REQ_STS",		BIT(20)},
+	{"GPIOCOM3_VNN_REQ_STS",		BIT(21)},
+	{"GPIOCOM2_VNN_REQ_STS",		BIT(22)},
+	{"GPIOCOM1_VNN_REQ_STS",		BIT(23)},
+	{"GPIOCOM0_VNN_REQ_STS",		BIT(24)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_req_status_3_map[] = {
+	{"GPIOCOM5_VNN_REQ_STS",		BIT(11)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_misc_status_map[] = {
+	{"CPU_C10_REQ_STS",			BIT(0)},
+	{"PCIe_LPM_En_REQ_STS",			BIT(3)},
+	{"ITH_REQ_STS",				BIT(5)},
+	{"CNVI_REQ_STS",			BIT(6)},
+	{"ISH_REQ_STS",				BIT(7)},
+	{"USB2_SUS_PG_Sys_REQ_STS",		BIT(10)},
+	{"PCIe_Clk_REQ_STS",			BIT(12)},
+	{"MPHY_Core_DL_REQ_STS",		BIT(16)},
+	{"Break-even_En_REQ_STS",		BIT(17)},
+	{"MPHY_SUS_REQ_STS",			BIT(22)},
+	{"xDCI_attached_REQ_STS",		BIT(24)},
+	{}
+};
+
+static const struct pmc_bit_map *adl_lpm_maps[] = {
+	adl_clocksource_status_map,
+	adl_power_gating_status_0_map,
+	adl_power_gating_status_1_map,
+	adl_power_gating_status_2_map,
+	adl_d3_status_0_map,
+	adl_d3_status_1_map,
+	adl_d3_status_2_map,
+	adl_d3_status_3_map,
+	adl_vnn_req_status_0_map,
+	adl_vnn_req_status_1_map,
+	adl_vnn_req_status_2_map,
+	adl_vnn_req_status_3_map,
+	adl_vnn_misc_status_map,
+	tgl_signal_status_map,
+	NULL
+};
+
 static const struct pmc_reg_map adl_reg_map = {
 	.pfear_sts = ext_adl_pfear_map,
 	.slp_s0_offset = ADL_PMC_SLP_S0_RES_COUNTER_OFFSET,
@@ -749,6 +932,17 @@ static const struct pmc_reg_map adl_reg_map = {
 	.pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET,
 	.pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT,
 	.ltr_ignore_max = ADL_NUM_IP_IGN_ALLOWED,
+	.lpm_num_modes = ADL_LPM_NUM_MODES,
+	.lpm_num_maps = ADL_LPM_NUM_MAPS,
+	.lpm_res_counter_step_x2 = TGL_PMC_LPM_RES_COUNTER_STEP_X2,
+	.etr3_offset = ETR3_OFFSET,
+	.lpm_sts_latch_en_offset = ADL_LPM_STATUS_LATCH_EN_OFFSET,
+	.lpm_priority_offset = ADL_LPM_PRI_OFFSET,
+	.lpm_en_offset = ADL_LPM_EN_OFFSET,
+	.lpm_residency_offset = ADL_LPM_RESIDENCY_OFFSET,
+	.lpm_sts = adl_lpm_maps,
+	.lpm_status_offset = ADL_LPM_STATUS_OFFSET,
+	.lpm_live_status_offset = ADL_LPM_LIVE_STATUS_OFFSET,
 };
 
 static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset)
drivers/platform/x86/intel/pmc/core.h +13 -0
index 45b352ece6db..333e25981e8e 100644
@@ -222,6 +222,18 @@ enum ppfear_regs {
 /* Extended Test Mode Register LPM bits (TGL and later */
 #define ETR3_CLEAR_LPM_EVENTS			BIT(28)
 
+/* Alder Lake Power Management Controller register offsets */
+#define ADL_LPM_EN_OFFSET			0x179C
+#define ADL_LPM_RESIDENCY_OFFSET		0x17A4
+#define ADL_LPM_NUM_MODES			2
+#define ADL_LPM_NUM_MAPS			14
+
+/* Alder Lake Low Power Mode debug registers */
+#define ADL_LPM_STATUS_OFFSET			0x170C
+#define ADL_LPM_PRI_OFFSET			0x17A0
+#define ADL_LPM_STATUS_LATCH_EN_OFFSET		0x1704
+#define ADL_LPM_LIVE_STATUS_OFFSET		0x1764
+
 const char *pmc_lpm_modes[] = {
 	"S0i2.0",
 	"S0i2.1",
@@ -281,6 +293,7 @@ struct pmc_reg_map {
 	const u32 pm_vric1_offset;
 	/* Low Power Mode registers */
 	const int lpm_num_maps;
+	const int lpm_num_modes;
 	const int lpm_res_counter_step_x2;
 	const u32 lpm_sts_latch_en_offset;
 	const u32 lpm_en_offset;
Signature · 1 line
2.25.1
#8 lore raw

PATCH v5 5/5 platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake PCH

In reply to Gayatri Kammela

From: "David E. Box" <[email protected]>

Alder PCH uses the same Gigabit Ethernet (GBE) device as Tiger Lake PCH which cannot achieve PC10 without ignoring the PMC GBE LTR. Add this work around for Alder Lake PCH as well.

---
 drivers/platform/x86/intel/pmc/core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/platform/x86/intel/pmc/core.c +3 -3
index e645ede591d8..7c4bf7d22fd5 100644
@@ -1983,10 +1983,10 @@ static int pmc_core_probe(struct platform_device *pdev)
 		pmc_core_get_tgl_lpm_reqs(pdev);
 
 	/*
-	 * On TGL, due to a hardware limitation, the GBE LTR blocks PC10 when
-	 * a cable is attached. Tell the PMC to ignore it.
+	 * On TGL and ADL, due to a hardware limitation, the GBE LTR blocks PC10
+	 * when a cable is attached. Tell the PMC to ignore it.
 	 */
-	if (pmcdev->map == &tgl_reg_map) {
+	if (pmcdev->map == &tgl_reg_map || pmcdev->map == &adl_reg_map) {
 		dev_dbg(&pdev->dev, "ignoring GBE LTR\n");
 		pmc_core_send_ltr_ignore(pmcdev, 3);
 	}
Signature · 1 line
2.25.1
#9 lore raw
In reply to Gayatri Kammela

Hi,

Quoted 54 lines · Gayatri Kammela

Hi,
The patch series move intel_pmc_core* files to pmc subfolder as well as add Alder Lake PCH-S support to PMC core driver.

Patch 1: Move intel_pmc_core* files to pmc subfolder Patch 2: Add Alderlake support to pmc core driver
Patch 3: Add Latency Tolerance Reporting (LTR) support to Alder Lake Patch 4: Add Alder Lake low power mode support for pmc core Patch 5: Add GBE Package C10 fix for Alder Lake

Changes since v1:
1) Add patch 1 to v2 i.e., Move intel_pmc_core* files to pmc subfolder.
2) Modify commit message for patch 2.

Changes since v2:
1) Dropped intel_pmc_ prefix from the file names.

Changes since v3:
1) Fixed an error reported by lkp.

Changes since v4:
1) Updated MAINTAINERS

David E. Box (1):
platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake
PCH

Gayatri Kammela (4):
platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc
subfolder
platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR)
support to Alder Lake
platform/x86/intel: pmc/core: Add Alder Lake low power mode support
for pmc core

 MAINTAINERS                                   |   2 +-
 drivers/platform/x86/Kconfig                  |  21 --
 drivers/platform/x86/Makefile                 |   1 -
 drivers/platform/x86/intel/Kconfig            |   1 +
 drivers/platform/x86/intel/Makefile           |   1 +
 drivers/platform/x86/intel/pmc/Kconfig        |  22 ++
 drivers/platform/x86/intel/pmc/Makefile       |   5 +
 .../{intel_pmc_core.c => intel/pmc/core.c}    | 309 +++++++++++++++++-
 .../{intel_pmc_core.h => intel/pmc/core.h}    |  17 +
 .../pmc/pltdrv.c}                             |   0
 10 files changed, 352 insertions(+), 27 deletions(-)
 create mode 100644 drivers/platform/x86/intel/pmc/Kconfig
 create mode 100644 drivers/platform/x86/intel/pmc/Makefile
 rename drivers/platform/x86/{intel_pmc_core.c => intel/pmc/core.c} (85%)
 rename drivers/platform/x86/{intel_pmc_core.h => intel/pmc/core.h} (95%)
 rename drivers/platform/x86/{intel_pmc_core_pltdrv.c => intel/pmc/pltdrv.c} (100%)
Quoted 8 lines
Cc Srinivas Pandruvada <[email protected]>
Cc Andy Shevchenko <[email protected]>
Cc David Box <[email protected]>
Cc You-Sheng Yang <[email protected]>
Cc Hans de Goede <[email protected]>
Cc Rajneesh Bhardwaj <[email protected]>

base-commit: d936eb23874433caa3e3d841cfa16f5434b85dcf

Thank you for your patch-series, I've applied the series to my review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Note it will show up in my review-hans branch once I've pushed my local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window.

Regards,

Hans

#10 lore raw
Quoted 87 lines

-----Original Message-----
From: Hans de Goede <[email protected]>
Sent: Saturday, July 17, 2021 8:33 AM
To: Kammela, Gayatri <[email protected]>; platform-driver- [email protected]
Cc: [email protected]; [email protected]; [email protected]; [email protected]; Pandruvada, Srinivas <[email protected]>; Box, David E <[email protected]>; [email protected]; Mashiah, Tamar <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH v5 0/5] Add Alder Lake PCH-S support to PMC core driver

Hi,

Quoted 56 lines · Gayatri Kammela

Hi,
The patch series move intel_pmc_core* files to pmc subfolder as well as add Alder Lake PCH-S support to PMC core driver.

Patch 1: Move intel_pmc_core* files to pmc subfolder Patch 2: Add Alderlake support to pmc core driver Patch 3: Add Latency Tolerance Reporting (LTR) support to Alder Lake Patch 4: Add Alder Lake low power mode support for pmc core Patch 5: Add GBE Package C10 fix for Alder Lake

Changes since v1:
1) Add patch 1 to v2 i.e., Move intel_pmc_core* files to pmc subfolder.
2) Modify commit message for patch 2.

Changes since v2:
1) Dropped intel_pmc_ prefix from the file names.

Changes since v3:
1) Fixed an error reported by lkp.

Changes since v4:
1) Updated MAINTAINERS

David E. Box (1):
platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake
PCH

Gayatri Kammela (4):
platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc
subfolder
platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR)
support to Alder Lake
platform/x86/intel: pmc/core: Add Alder Lake low power mode support
for pmc core

 MAINTAINERS                                   |   2 +-
 drivers/platform/x86/Kconfig                  |  21 --
 drivers/platform/x86/Makefile                 |   1 -
 drivers/platform/x86/intel/Kconfig            |   1 +
 drivers/platform/x86/intel/Makefile           |   1 +
 drivers/platform/x86/intel/pmc/Kconfig        |  22 ++
 drivers/platform/x86/intel/pmc/Makefile       |   5 +
 .../{intel_pmc_core.c => intel/pmc/core.c}    | 309 +++++++++++++++++-
 .../{intel_pmc_core.h => intel/pmc/core.h}    |  17 +
 .../pmc/pltdrv.c}                             |   0
 10 files changed, 352 insertions(+), 27 deletions(-)  create mode
100644 drivers/platform/x86/intel/pmc/Kconfig
 create mode 100644 drivers/platform/x86/intel/pmc/Makefile
 rename drivers/platform/x86/{intel_pmc_core.c => intel/pmc/core.c}

(85%) rename drivers/platform/x86/{intel_pmc_core.h => intel/pmc/core.h} (95%) rename drivers/platform/x86/{intel_pmc_core_pltdrv.c => intel/pmc/pltdrv.c} (100%)

Quoted 8 lines
Cc Srinivas Pandruvada <[email protected]>
Cc Andy Shevchenko <[email protected]>
Cc David Box <[email protected]>
Cc You-Sheng Yang <[email protected]>
Cc Hans de Goede <[email protected]>
Cc Rajneesh Bhardwaj <[email protected]>

base-commit: d936eb23874433caa3e3d841cfa16f5434b85dcf

Thank you for your patch-series, I've applied the series to my review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-
x86.git/log/?h=review-hans

Quoted 6 lines

Note it will show up in my review-hans branch once I've pushed my local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window.

Thank you Hans!

Quoted 4 lines

Regards,

Hans