tc on a PDA
hello,
i have a 5500 iPaq with familiar 0.8.2 on it and i don't know how to install a traffic shaper tool on it.
I installed iproute2 package i found on familiar site and for that i have the tc and ip commands, but when trying to add a qdisc, as a dummy example, i get the next answer:
Quoted 1 line
tc qdisc add dev wlan0 root cbq bandwidth 100Mbit avpkt 100
RTNETLINK answers: Invalid argument
do i have to install some other packages, recompile the kernel or something else?
thans in advance,
Marius Corici
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 11 lines · Marius Corici
hello,
i have a 5500 iPaq with familiar 0.8.2 on it and i don't know how to install a traffic shaper tool on it.
I installed iproute2 package i found on familiar site and for that i have the tc and ip commands, but when trying to add a qdisc, as a dummy example, i get the next answer:Quoted 1 line
tc qdisc add dev wlan0 root cbq bandwidth 100Mbit avpkt 100
RTNETLINK answers: Invalid argument
This suggests no cbq, so you probably need to recompile the kernel. If you had to install iproute2 then almost certainly the kernel was not built for QoS.
Quoted 6 lines
do i have to install some other packages, recompile the kernel or something else?
thans in advance,
Marius Corici
Curiosity: What makes you think shaping is needed on a PDA? --
gypsy
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
I don't know if QoS is in the kernel that you are running, it is probably not.
Why do you want to shape a pda?
/Peter Salanki
Port80 AB (AS16150)
Stockholm, Sweden
22 jun 2005 kl. 13.13 skrev Marius Corici:
Quoted 18 lines
hello,
i have a 5500 iPaq with familiar 0.8.2 on it and i don't know how to install a traffic shaper tool on it.
I installed iproute2 package i found on familiar site and for that i have the tc and ip commands, but when trying to add a qdisc, as a dummy example, i get the next answer:Quoted 3 lines
tc qdisc add dev wlan0 root cbq bandwidth 100Mbit avpkt 100
RTNETLINK answers: Invalid argument
do i have to install some other packages, recompile the kernel or something else?
Quoted 9 lines
thans in advance,
Marius Corici
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
I just want to tell that i was able to recompile the pda's kernel succesfully for traffic shaping. Another problem appeared, but i solved it: the cbq command i sent before needs a handle, i don't know why ...
So in conclusion on a 5550 hp iPAQ with Familiar 0.8.2 distribution and 2.4.19 ARM patched kernel the shaping works, with the exception of the efficient and simply to configure HTB qdisc.
Marius
Quoted 20 lines · gypsy
Quoted 11 lines · Marius Corici
hello,
i have a 5500 iPaq with familiar 0.8.2 on it and i don't know how to install a traffic shaper tool on it.
I installed iproute2 package i found on familiar site and for that i have the tc and ip commands, but when trying to add a qdisc, as a dummy example, i get the next answer:Quoted 1 line
tc qdisc add dev wlan0 root cbq bandwidth 100Mbit avpkt 100
RTNETLINK answers: Invalid argument
This suggests no cbq, so you probably need to recompile the kernel. If you had to install iproute2 then almost certainly the kernel was not built for QoS.
Quoted 3 lines
do i have to install some other packages, recompile the kernel or something else?
Quoted 8 lines
Quoted 3 lines
thans in advance,
Marius Corici
Curiosity: What makes you think shaping is needed on a PDA? --
gypsy
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 10 lines · Marius Corici
I just want to tell that i was able to recompile the pda's kernel succesfully for traffic shaping. Another problem appeared, but i solved it: the cbq command i sent before needs a handle, i don't know why ...
So in conclusion on a 5550 hp iPAQ with Familiar 0.8.2 distribution and 2.4.19 ARM patched kernel the shaping works, with the exception of the efficient and simply to configure HTB qdisc.Marius
AWESOME! Why no HTB?
--
gypsy
Quoted 21 lines · gypsy
Quoted 20 lines
Quoted 11 lines · Marius Corici
hello,
i have a 5500 iPaq with familiar 0.8.2 on it and i don't know how to install a traffic shaper tool on it.
I installed iproute2 package i found on familiar site and for that i have the tc and ip commands, but when trying to add a qdisc, as a dummy example, i get the next answer:Quoted 1 line
tc qdisc add dev wlan0 root cbq bandwidth 100Mbit avpkt 100
RTNETLINK answers: Invalid argument
This suggests no cbq, so you probably need to recompile the kernel. If you had to install iproute2 then almost certainly the kernel was not built for QoS.
Quoted 3 lines
do i have to install some other packages, recompile the kernel or something else?
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
thans in advance,
Marius Corici
Curiosity: What makes you think shaping is needed on a PDA? --
gypsy
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc